You are on page 1of 3

ABSTRACT

This project is used to pump water from one place to another by using speed breaker. The
main parts in this project are Suspension unit, Gear and wheel setup, Coil and permanent magnet,
battery and water pump.

The suspension unit is connected at the place of speed breaker, which is alternative
arrangement of speed breaker. When vehicles cross the speed breaker, the suspension unit gets
vibrated up and down. This vibration causes a crank to move up and down. A flywheel is
connected with the crank with gear setup. A generator is connected with the driven gear.

The coil in the generator will be rotated along with the flywheel. The gear set up is
adjusted so that the coil should rotate 50 times when one vibration occurs.

According to Faraday's law, "As long as there is a change in magnetic flux linked with
the coil, an emf is induced." So, In each and every rotation, electricity is generated. The
generated electricity is stored in a battery. From the battery the power is used to drive a water
pump for pumping water.
DIAGRAM
ADVANTAGES

No power consumption
Low installation costs
High power output
No pollution to the environment

APPLICATIONS

Used in roads for water pumping


Used in municipality water pumping

You might also like