Professional Documents
Culture Documents
Di PDF
Di PDF
K ELECTRICAL
B
SECTION
DRIVER INFORMATION SYSTEM C
E
CONTENTS
PRECAUTIONS .......................................................... 2 Power Supply and Ground Circuit Check/With F
Precautions for Supplemental Restraint System Tachometer ............................................................. 18
(SRS) AIR BAG and SEAT BELT PRE-TEN- Work Flow/Without Tachometer .............................. 19
SIONER .................................................................. 2 Trouble Diagnoses/Without Tachometer ................ 19 G
Wiring Diagrams and Trouble Diagnosis .................. 2 SYMPTOM CHART ............................................. 19
COMBINATION METERS ........................................... 3 Power Supply and Ground Circuit Check/Without
System Description .................................................. 3 Tachometer ............................................................. 20
H
UNIFIED CONTROL METER ................................ 3 Inspection/Engine Speed Signal ............................. 20
HOW TO CHANGE THE DISPLAY FOR ODO/ Inspection/Water Temperature Gauge .................... 22
TRIP METER ........................................................ 3 Inspection/Vehicle Speed Signal ............................ 23
POWER SUPPLY AND GROUND CIRCUIT ........ 3 Inspection/Fuel Level Sensor Unit .......................... 24 I
WATER TEMPERATURE GAUGE ........................ 3 FUEL LEVEL SENSOR UNIT ............................. 24
TACHOMETER ..................................................... 4 LOW-FUEL WARNING LAMP ............................. 25
FUEL GAUGE ....................................................... 4 The Fuel Gauge Pointer Fluctuates, Indicator J
SPEEDOMETER ................................................... 4 Wrong Value or Varies. ........................................... 26
TIME CONTROL SYSTEM ................................... 4 The Fuel Gauge Does Not Move to F-Position. ...... 26
ComponentParts and Harness Connector Location..... 5 The Fuel Gauge Does Not Work. ........................... 27
DI
Combination Meter ................................................... 6 Low Fuel Warning Lamp Illuminate or Not Illuminate... 27
CHECK/WITH TACHOMETER ............................. 6 Electrical Components Inspection .......................... 27
Combination Meter ................................................... 7 FUEL LEVEL SENSOR UNIT CHECK ................ 27
CHECK/WITHOUT TACHOMETER ...................... 7 THERMAL TRANSMITTER CHECK ................... 28 L
Schematic/With Tachometer .................................... 8 METER/GAUGE RESISTANCE CHECK ............. 28
Schematic/Without Tachometer ............................... 9 VEHICLE SPEED SENSOR CHECK .................. 28
Wiring Diagram METER /With Tachometer ... 10 Removal and Installation for Combination Meter ... 28 M
Wiring Diagram METER / Without Tachometer... 12 Disassembly and Assembly for Combination Meter... 29
Terminals and Reference Value for Combination WITH TACHOMETER ......................................... 29
Meter ...................................................................... 14 WITHOUT TACHOMETER .................................. 30
WITH TACHOMETER ......................................... 14 WARNING LAMPS .................................................... 31
WITHOUT TACHOMETER ................................. 15 Schematic ............................................................... 31
Meter/Gauges Operation, Odo/Trip Meter .............. 15 Wiring Diagram WARN / With Tachometer ... 32
SELF-DIAGNOSIS FUNCTION .......................... 15 Wiring Diagram WARN /Without Tachometer... 37
HOW TO ALTERNATE SELF-DIAGNOSIS Electrical Components Inspection .......................... 40
FUNCTION .......................................................... 15 OIL PRESSURE SWITCH ................................... 40
Work Flow/With Tachometer .................................. 16 WARNING BUZZER .................................................. 41
Trouble Diagnoses/With Tachometer ..................... 17 Wiring Diagram BUZZER /RHD MODELS ..... 41
SYMPTOM CHART 1 .......................................... 17 CLOCK ...................................................................... 42
SYMPTOM CHART 2 .......................................... 18 Wiring Diagram CLOCK ................................ 42
DI-1
PRECAUTIONS
PRECAUTIONS PFP:00011
Precautions for Supplemental Restraint System (SRS) AIR BAG and SEAT
BELT PRE-TENSIONER EKS002UZ
The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual.
WARNING:
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow harness connectors.
Wiring Diagrams and Trouble Diagnosis EKS002V0
DI-2
COMBINATION METERS
DI
SEL175W
The odometer/trip display switching and trip display resetting can be identified by the time from pressing
the odometer/trip switch to releasing it. L
When resetting with trip A displayed, only trip A display is reset (same as trip B).
POWER SUPPLY AND GROUND CIRCUIT
Power is supplied at all times M
through 10A fuse [No.2,located in fuse and fusible link box]
to combination meter terminal 12(with tachometer) or 23(without tachometer).
With the ignition switch in the ON or START position, power is supplied
through 10A fuse [No.11,located in fuse and fusible link box]
to combination meter terminal 13(with tachometer) or 67(without tachometer).
Ground is supplied
to combination meter terminal 14(with tachometer) or 11(without tachometer)
RHD Models: through body grounds M2 and M27.
LHD Models: through body grounds D2 (only with power window),M2 , M49 and M121.
WATER TEMPERATURE GAUGE
The water temperature gauge indicates the engine coolant temperature. The reading on the gauge is based
on the resistance of the thermal transmitter.
DI-3
COMBINATION METERS
As the temperature of the coolant increases, the resistance of the thermal transmitter decreases. A variable
ground is supplied to terminal 6(with tachometer) or 22(without tachometer) of the combination meter for the
water temperature gauge. The needle on the gauge moves from C to H.
TACHOMETER
The tachometer indicates engine speed in revolution per minutes (rpm).
The tachometer is regulated by a signal.
from terminal 18(Gasoline engine models) or 5(Diesel engine models) of the ECM
to combination meter terminal 9 for the tachometer.
FUEL GAUGE
The fuel gauge indicates the approximate fuel level in the fuel tank.
The fuel gauge is regulated by a variable ground signal supplied
to combination meter terminal 5(with tachometer) or 21(without tachometer) for the fuel level sensor
from terminal 4(Gasoline engine models) or 3(Diesel engine models) of the fuel level sensor unit
through terminal 1 of the fuel level sensor unit and
RHD Models:through body grounds M2 and M27.
LHD Models:through body grounds D2 (only with power window),M2,M49 and M121.
SPEEDOMETER
The vehicle speed sensor provides a voltage signal to the combination meter for the speedometer.
The voltage is supplied
to combination meter terminals 10 and 11(with tachometer) or 10 and 19 (without tachometer) for the
speedometer
from terminal 1 and 2 of the vehicle speed sensor.
The speedometer converts the voltage into the vehicle speed displayed.
TIME CONTROL SYSTEM
OUTLINE
Unified meter control unit (time control system) totally controls the following body electrical system operations.
Rear window defogger
Power door lock
INPUT/OUTPUT
System Input Output
Door lock/unlock switch
Power door lock Door lock actuator
Door unlock sensor
Ignition switch (ON)
Rear window defogger Rear window defogger relay
Rear window defogger switch
DI-4
COMBINATION METERS
J
PKIA0563E
DI
DI-5
COMBINATION METERS
CHECK/WITH TACHOMETER
PKIA0564E
DI-6
COMBINATION METERS
CHECK/WITHOUT TACHOMETER A
DI
PKIA0565E
DI-7
COMBINATION METERS
TKWH0143E
DI-8
COMBINATION METERS
DI
TKWH0144E
DI-9
COMBINATION METERS
TKWH0115E
DI-10
COMBINATION METERS
DI
TKWH0116E
DI-11
COMBINATION METERS
TKWH0117E
DI-12
COMBINATION METERS
DI
TKWH0118E
DI-13
COMBINATION METERS
WITH TACHOMETER
CONDITION
TERMI- WIRE
ITEM Ignition Voltage (V)
NAL COLOR Operation or condition
switch
Refer to DI-27, "Electrical Components
5 BR/R Fuel level sensor signal ON
Inspection"
Thermal transmitter sig- Refer to DI-27, "Electrical Components
6 PU/W
nal Inspection"
When ECM connector dis-
Approx.8-10V
connected
Gasoline engine models
ECD1068D
Speedometer operated
Vehicle speed signal
19 BR/W ON [When vehicle speed is
(2-pulse)
approx. 40 km/h(25MPH)]
ELF1080D
DI-14
COMBINATION METERS
WITHOUT TACHOMETER
CONDITION
A
TERMI- WIRE
ITEM Ignition Voltage (V)
NAL COLOR Operation or condition
switch
B
10 LG Speedometer operated
[When vehicle speed is
approx. 20 km/
Vehicle speed sensor h(12.5MPH)] C
ON
input signal [When vehicle speed is
19 LG/B approx. 40 km/h(25MPH)]
[When vehicle speed is
approx. 60 km/ D
PKIA0501E
h(37.5MPH)]
11 B Ground ON Approx. 0V
Refer to DI-27, "Electrical Components E
21 BR/R Fuel level sensor signal ON
Inspection"
Thermal transmitter sig- Refer to DI-27, "Electrical Components
22 PU/W
nal Inspection" F
23 GY Battery Power supply OFF Approx.12V
G
Speedometer operated
Vehicle speed signal
35 BR/W ON [When vehicle speed is
(2-pulse)
approx. 40 km/h(25MPH)] H
ELF1080D
Ignition switch ON or I
67 W/L ON Approx.12V
START
SELF-DIAGNOSIS FUNCTION J
Odo/trip meter segment can be checked in self-diagnosis mode.
Meters/gauges can be checked in self-diagnoses mode.
DI
HOW TO ALTERNATE SELF-DIAGNOSIS FUNCTION
1. Turn the ignition switch ON, and switch the odometer/trip meter to trip A or trip B.
NOTE: L
If the diagnosis function is activated with the trip meter A displayed, the mileage on the trip meter A is
reset to 0.0 km (same as the trip meter B display).
2. Turn the ignition switch OFF. M
3. While pushing the odo/trip meter switch, turn the ignition switch ON again.
4. Check that the trip meter displays 0000.0.
5. Push the odo/trip meter switch at least 3 times within 5 seconds.
6. All the segments on the odo/trip meter illuminate, and simulta-
neously the low-fuel warning lamp indicator illuminate. At this
time, the unified control meter is turned to diagnosis mode.
NOTE:
If any of the segments is not displayed, replace the odo/trip
meter with the speedometer assembly.
EL-2563D
DI-15
COMBINATION METERS
7. Push the odo/trip meter switch. Indication of each meter/gauge should be as shown in the figure during
pushing odo/trip meter switch if there is no malfunctioning. (at this time, the low-fuel warning lamp goes
off).
SKIA0510E
DI-16
COMBINATION METERS
SYMPTOM CHART 1
Symptom Possible cause Repair procedure
M
Fuel warning lamp is 1. Check the sensor for malfunctioning meter/gauge.
malfunctioning. 1. Sensor Signal INSPECTION/ENGINE SPEED SIGNAL (Refer toDI-20, "Inspec-
Engine speed signal tion/Engine Speed Signal" )
INSPECTION/FUEL LEVEL SENSOR UNIT (Refer to DI-24,
One of tachometer/fuel Fuel gauge "Inspection/Fuel Level Sensor Unit" )
gauge/water temp. gauge is Water temp gauge INSPECTION/THERMAL TRANSMITTER (Refer toDI-22,
malfunctioning. "Inspection/Water Temperature Gauge" )
2. Unified meter control unit
2. Replace unified meter control unit
DI-17
COMBINATION METERS
SYMPTOM CHART 2
Symptom Possible case Repair order
1. Check resistance of meter/gauge indicating malfunction.
One of speedometer/tachom- If resistance is NG, replace the meter/gauge.
1. Meter/Gauge
eter/fuel gauge/water temp. Refer toDI-28, "METER/GAUGE RESISTANCE CHECK"
gauge is malfunctioning. 2. Unified meter control unit
2. If the resistance of meter/gauge is OK, replace unified meter
control unit.
Multiple meter/gauge are mal-
functioning, (except for odo/ Unified meter control unit Replace unified meter control unit.
trip meter)
1. CHECK FUSES
Check that any of the fuses in combination meter is blown.
Unit Power source Fuse No.
Battery 2
Combination meter
Ignition switch ON or START 11
OK or NG
OK >> GO TO 2.
NG >> If fuse is blown, be sure to eliminate cause of problem before installing new fuse.Refer to PG-2,
"POWER SUPPLY ROUTING" .
OK or NG SKIA0813E
OK >> GO TO 3.
NG >> Check harness for open or short between combination meter and fuse.
OK or NG
OK >> Inspection end.
NG >> Check ground harness.
SKIA0814E
DI-18
COMBINATION METERS
SYMPTOM CHART
Symptom Possible cause Repair procedure
Fuel warning lamp is 1. Check the sensor for malfunctioning meter/gauge.
malfunctioning. 1. Sensor Signal INSPECTION/FUEL LEVEL SENSOR UNIT (Refer toDI-24,
Fuel gauge "Inspection/Fuel Level Sensor Unit" )
One of tachometer/fuel INSPECTION/THERMAL TRANSMITTER (Refer toDI-22,
Water temp gauge
gauge/water temp. gauge is "Inspection/Water Temperature Gauge" )
malfunctioning. 2. Unified meter control unit
2. Replace unified meter control unit assembly
DI-19
COMBINATION METERS
1. CHECK FUSES
Check that any of the fuses in combination meter is blown.
Unit Power source Fuse No.
Battery 2
Combination meter
Ignition switch ON or START 11
OK or NG
OK >> GO TO 2.
NG >> If fuse is blown, be sure to eliminate cause of problem before installing new fuse.Refer to PG-2,
"POWER SUPPLY ROUTING" .
OK or NG SKIA0811E
OK >> GO TO 3.
NG >> Check harness for open or short between combination meter and fuse.
OK or NG
OK >> Inspection end.
NG >> Check ground harness.
SKIA0812E
DI-20
COMBINATION METERS
5(G/W).
4.
DI-21
COMBINATION METERS
SKIA0820E
With tachometer
Check continuity between combination meter harness connector
M24 terminal 6(PU/W) and ground.
Without tachometer
Check continuity between combination meter harness connector
M21 terminal 22(PU/W) and ground.(without tachometer)
5.
DI-22
COMBINATION METERS
DI
DI-23
COMBINATION METERS
with tachometer
Check continuity between combination meter harness connector
M24 terminal 10(LG/B) and ground.
Check continuity between combination meter harness connector
M24 terminal 11(LG) and ground.
Without tachometer
Check continuity between combination meter harness connector
M21 terminal 19(LG/B) and ground.
Check continuity between combination meter harness connector
M21 terminal 10(LG) and ground. SKIA0824E
5.
DI-24
COMBINATION METERS
L
With tachometer
Check continuity between combination meter harness connector
M24 terminal 5(BR/R) and ground. M
Without tachometer
Check continuity between combination meter harness connector
M21 terminal 21(BR/R) and ground.
5.
DI-25
COMBINATION METERS
OK >> GO TO 4
NG >> Repair or replace harnesses or connectors.
1. QUESTIONNAIRE 1
Does it take a long time for the pointer to move to F-position?
YES?
YES >> GO TO 2.
NO >> GO TO 3.
2. QUESTIONNAIRE 2
Was the vehicle fueled with the ignition switch ON?
YES?
YES >> Be sure to fuel the vehicle with the ignition switch OFF. Otherwise it will take a long time to move
to F-position because of the characteristic of the fuel gauge.
NO >> GO TO 3.
DI-26
COMBINATION METERS
3. QUESTIONNAIRE 3 A
Is the floor or the vehicle inclined?
YES?
YES >> It may not be filled fully. B
NO >> GO TO 4.
4. QUESTIONNAIRE 4 C
During driving, does the fuel gauge pointer move gradually toward E-position?
YES?
D
YES >> Check the components. Refer to DI-24, "FUEL LEVEL SENSOR UNIT" .
NO >> The float arm may interfere or bind with any of the components in the fuel tank.
The Fuel Gauge Does Not Work. EKS002VM E
1. HARNESS CONNECTOR INSPECTION
1. Turn the ignition switch OFF. F
2. Check combination meter, fuel level sensor unit, and terminals (meter-side, module-side, lead-side, and
harness-side) for poor connection and bend.
OK or NG G
OK >> GO TO 2.
NG >> Replace fuel level sensor unit.
H
2. CHECK INSTALLATION CONDITION.
Check fuel level sensor unit installation (refer to FL-7, "FUEL LEVEL SENSOR UNIT, FUEL FILTER AND
FUEL PUMP (KA24DE)"FL-12, "FUEL LEVEL SENSOR UNIT (ZD30DD)" , and check whether the float arm I
interferes or binds with any components inside the arm.
OK or NG
OK >> Fuel level sensor unit is OK. J
NG >> Check fuel level sensor unit.Refer to DI-24, "FUEL LEVEL SENSOR UNIT" .
Low Fuel Warning Lamp Illuminate or Not Illuminate EKS002VN
DI
1. SELF-DIAGNOSIS INSPECTION
Preform combination meter self-diagnosis mode.Refer to DI-15, "Meter/Gauges Operation, Odo/Trip Meter" .
L
OK or NG
OK >> Check fuel level sensor unit.Refer to DI-24, "FUEL LEVEL SENSOR UNIT" .
NG >> Replace unified meter control unit (sub).
M
Electrical Components Inspection EKS002VO
DI-27
COMBINATION METERS
MEL424F
SKIA0511E
Measurement
Condition Voltage V Resistance
terminal
Rotate vehicle
1 2 Approx. 0 - 5
speed sensor
Approx. 250 - 330
SKIA0806E
DI-28
COMBINATION METERS
SKIA0807E
D
3. Remove the combination meter.
Disassembly and Assembly for Combination Meter EKS002VQ
E
WITH TACHOMETER
SKIA0515E DI
DI-29
COMBINATION METERS
WITHOUT TACHOMETER
SKIA0514E
DI-30
WARNING LAMPS
DI
TKWH0119E
DI-31
WARNING LAMPS
TKWH0120E
DI-32
WARNING LAMPS
DI
TKWH0121E
DI-33
WARNING LAMPS
TKWH0122E
DI-34
WARNING LAMPS
DI
TKWH0123E
DI-35
WARNING LAMPS
TKWH0124E
DI-36
WARNING LAMPS
DI
TKWH0125E
DI-37
WARNING LAMPS
TKWH0126E
DI-38
WARNING LAMPS
DI
TKWH0127E
DI-39
WARNING LAMPS
ELF0044D
DI-40
WARNING BUZZER
DI
TKWH0042E
DI-41
CLOCK
CLOCK PFP:25820
TKWH0128E
DI-42