O[ = : TILAMA - WELDING TECHNOLOGY INST!
a Add+-424-Mini Khai - Har Ba-Frong-ta Noi - VietNam
oN mc! (84) HES 756 - Fax: (84) 48 638 104 _
WELDING PROCEDURE
SPECIFICATION (WPS)
____ LILAMA#NEC - SMAW 12
a 2.
smaw 217 ie |
sie A eH,
[PREPARED BY CHECKED BY
La aa
Yf a ~ flo
02, Jun, 2006 02, Jun, 2006
__PHAM DAC LONG NGUYEN TRUONG THIEN[A / NCC - SMAW 12
EiGAMA CORPORATION —— By: Pham Dac Long
Welding Procedure Specification No: LIDAMA / NCC-SMAW12 Date: 22/3/2008
Seprocing ‘POR No LILAMA - SMAW ENI2 Date: 22/3/2005
Reyjsion No. 0
Weldihg Process(es) ah SMAW.(I11)
Welding Type(s) a4] Manual top (Manual, Auto, Semi-guto, Machine)
Applicable Code: 4. EN 288.3 .
JOINTS atv @P DETAILS
Joints Design : Grooves and Fillets (For other type of joint, see attachment)
Backing (Yes)....... (No)... Xe...
Backing Material (Fype): @oxs
[Meaal 7p oNon fusing Met 7
* Nonmetallic, 20ther
eH ge whe nl axa
en ee TR Syme ar Writen
Descriphion should show the general at the parts =
to be welded. Whore applicable te Wel hy ont tre pet
details of weld groove may be specified. .
oot goat
BASE METALS
PN to P.No GroupNo 1 te GroupNo.14/
OR
Specification type and grade : A36, $5400, 235 Gr.A, 235
to Specification typeand grade: A36, $5400, Q235 Gr.A, 235
oR
‘Chem. Analysis and Mech. Prop.
to Chem. Analysis and Mech. Prop.
Thickness Range
Base Metal B Groove: 3 mm to 24 mm. let : Unlimited
Other:
FILLER METALS
Specification No GFA) : SFASA
AWS No. (Class) * : E7016
F.No : 4
A.No 1
Size of Filler Metals : 2.6mm 3.2 mn, 4.0mm
Deposited Weld Metal :
‘Thickness Range :
Groove 3mm to24 mm
Fillet- Unlimited V
lectrode- Flux (Class) N/A.
Filler Metal Trade Name KOBELCO (L8 52)/HYUNDAI (5 7016-H)/CHOSUN (LC 300)
‘Consumable Insert N/A
Other N/A
POSITIONS
Position(s) of Groove Ow
Welding Progression : Up
Position(s) of Fillet Al |
Tebresesabe:01 POTEESELS WN 131A UMUTET 1OL:MOxs s¢:9T 90a2-9a-NNEWPS No.: LILAMA/ NCC - SMAW 12 Sheet 2/2
PREHEAT
Preheat Temperature. Min : N/A
Interpass Temperature. Max : 250°C
Preheat Maintenance :
(Continuous or special heating applicable should be recorded )
POST WELD HEAT TREATMENT /, >
(o>
‘Temperature Range : N/A
“Time Range 7 : _N/A
GAS
Percent Composition
Gas(es)
Shielding N/A
Backing : N/A
Trailing z N/A
ELECTRICAL CHARACTERISTICS
Current AC or DC pe Polarity =
Amps (Range): See Table
Volts (Range) : See Table
(Amps and volts range should be recorded for each electrode size, position, and thickness, etc. This
information may be listed in a tabular form similar to that shown below )
Tungsten Electrode Size and Type N/A
Mode of Metal Transfer for GMAW — : N/A
Flectrode Wire Feed Speed Range N/A
Palse welding details: : N/A
TECHNIQUE
String or Weave Bead : Weaving max. 3 times of electrode dia
Orifice or Gas Cup size : N/A
Initial and Interpass Cleaning : Grinding and brushing,
Method of Back Gouging : Grinding and/or Arc Air Blowing
Contact Tube Work Distance : N/A
Multiple or Single Pass (per side) Maltiple
Multiple or Single Electrodes, Single
Oscillation: amplitude, frequency, dwell time: N/A
‘Travel Speed Range : Seo table
Peening : N/A
‘Torch angle: :
Weld” | Process [Filler Metal Carrent Volts [Travel Speed | Hleatinpat |
ass(es) Glass_[ Dia.(mm) | Polarity [Ampx(A)| (Vv) | cm/min | (/cm)
26 | pe+ |" 60.10 [3628 | 542 | Max. 36960 _]
[SMa | E7016 32 pee] “as.90_| 48-28 | 614 | Max 35600
20 Temaw | E701 32] DC | 90130 | 2030) 8:15 | Max. 29250
ne2 40} Dc+ | 110-170 | 20-30 | 10-20 | "Max. 30600,
32 | Der | 90120 | 2030 | 815 | Max. 27000
B_[SMAW | E7016 | ~go [per _} 10-160" | 30-30 10-20 |“ Max. 25800oramag Fanag soma
ey
ge
8
Zemsty ama gamary
aay rama
va St pe
“5.08
NOLLVUNDIUNOD LNIOL a1aM