Professional Documents
Culture Documents
ShopSupplies&Tools PDF
ShopSupplies&Tools PDF
2007
Cat Shop
Supplies and
Hand Tools
PECJ0003
1.800.523.8665 option 4 (Canada)
Introduction Section
Warranty Introduction
For products operating outside of Australia, Fiji, Nauru, New Caledonia, New Zealand, For products operating in Australia, Fiji, Nauru, New Caledonia, New Zealand,
Papua New Guinea, the Solomon Islands and Tahiti, the following is applicable: Papua New Guinea, the Solomon Islands and Tahiti, the following is applicable:
NEITHER THE FOREGOING EXPRESS WARRANTY NOR ANY OTHER WARRANTY THIS WARRANTY IS IN ADDITION TO WARRANTIES AND CONDITIONS IMPLIED BY
BY CATERPILLAR, EXPRESS OR IMPLIED, IS APPLICABLE TO ANY ITEM STATUTE AND OTHER STATUTORY RIGHTS AND OBLIGATIONS THAT BY ANY
CATERPILLAR SELLS WHICH IS WARRANTED DIRECTLY TO THE USER BY ITS APPLICABLE LAW CANNOT BE EXCLUDED, RESTRICTED OR MODIFIED
MANUFACTURER. (MANDATORY RIGHTS). ALL OTHER WARRANTIES OR CONDITIOINS,
THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS EXPRRESS OR IMPLIED (BY STATUTE OR OTHERWISE), ARE EXCLUDED.
OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS NEITHER THIS WARRANTY NOT ANY OTHER CONDITION OR WARRANTY BY
FOR A PARTICULAR PURPOSE. REMEDIES UNDER THIS WARRANTY ARE LIMITED CATERPILLAR, EXPRESS OR IMPLIED (SUBJECT ONLY TO THE MANDATORY
TO THE PROVISION OF MATERIAL AND SERVICES, AS SPECIFIED HEREIN. RIGHTS), IS APPLICABLE TO ANY ITEM CATERPILLAR SELLS WHICH IS
CATERPILLAR IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL WARRANTED DIRECTLY TO THE USER BY ITS MANUFACTURER.
DAMAGES. TO THE EXTENT PERMITTED UNDER THE MANDATORY RIGHTS, IF CATERPILLAR
CATERPILLAR EXLUDES ALL LIABILITY FOR OR ARISING FROM ANY NEGLIGENCE IS THE SUPPLIER TO THE USER, CATERPILLARS LIABILITY SHALL BE LIMITED AT
ON ITS PART OR THE PART OF ANY OF ITS EMPLOYEES, AGENTS OR ITS OPTION TO (a) IN THE CASE OF SERVICES, THE SUPPLY OF THE SERVICES
REPRESENTATIVES IN RESPECT OF THE MANUFACTURE OR SUPPLY OF GOODS AGAIN OR THE PAYMENT OF THE COST OF HAVING THE SERVICES SUPPLIED
SELF5389-01 OR THE PROVISION OF SERVICES RELATING TO THE GOODS. AGAIN, AND (b) IN THE CASE OF GOODS, THE REPAIR OR REPLACEMENT OF THE
IF OTHERWISE APPLICABLE, THE VIENNA CONVENTION (CONTRACTS FOR THE GOODS, THE SUPPLY OF EQUIVALENT GOODS, THE PAYMENT OF THE COST OF
INTERNATIONAL SALE OF GOODS) IS EXCLUDED IN ITS ENTIRETY. SUCH REPAIR OR REPLACEMENT OR THE ACQUISITION OF EQUIVALENT GOODS.
CATERPILLAR EXCLUDES ALL LIABILITY FOR OR ARISING FROM ANY
NEGLIGENCE ON ITS PART OR ON THE PART OF ANY OF ITS EMPLOYEES,
AGENTS OR REPRESENTATIVES IN RESPECT OF THE MANUFACTURE OR SUPPLY
OF GOODS OR THE PROVISION OF SERVICES RELATING TO THE GOODS.
CATERPILLAR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
UNLESS IMPOSED UNDER MANDATORY RIGHTS.
IF OTHERWISE APPLICABLE, THE VIENNA CONVENTION (CONTRACTS FOR THE
INTERNATIONAL SALE OF GOODS) IS EXCLUDED IN ITS ENTIRETY.
This warranty covers every major component of the products. Claims under this warranty
should be submitted to a place of business of a Caterpillar dealer or other source
approved by Caterpillar. For further information concerning either the location to
submit claims or Caterpillar as the issuer of this warranty, write Caterpillar Inc.,
100 N. E. Adams St., Peoria, IL USA 61629.
SELF5389-01
The Shop Supplies and Tools Catalog is a publication that incorporates all of the shop supplies, general
purpose hand tools, tool boxes, personal safety items and chemicals, lubricants and adhesives for dealer
and customer service shops.
All orders placed from the Caterpillar Miscellaneous Material Order System for this publication will
automatically place you on a subscription list.
If you do not wish to receive the supplements and do not wish to be added to the subscription list when
you order, you must place a verbal order with your order analyst and tell the order analyst at that time not
to add your name to the subscription mailing list. However, doing this will prevent you from automatically
receiving updates to this catalog in the future.
Ordering Procedure
The majority of the products listed in PECJ0003 are stocked at Caterpillar parts facilities. Select paint
and chemical products listed in PECJ0003 are not stocked but are distributed through Caterpillar's
Direct Ship program. All products in PECJ0003 can be ordered through the Caterpillar Parts Distribution
System using existing stock or emergency ordering procedures.
Dealers should refer to the Cat Dealer Numerical Parts Record (NPR) to determine if a questionable item
is returnable or not.
Contact Information
1.800.542.8665, option 4 (USA)
1.800.541.8665, option 4 (Ilinois)
1.800.523.8665, option 4 (Canada)
SSHT@cat.com (Internet e-mail)
++41 (22) 849 40 48/ 4428 (Geneva Phone)
++41 (22) 849 49 29 (Geneva Fax)
Hand Tools
Hand Tools (Inch)
Tool Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Socket Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Individual Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
Ratchets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21
Wrench Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
Hand Tools (Metric)
Socket Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26
Individual Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-32
Wrench Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-34
Individual Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-35
Miscellaneous Hand Tools
Ratchet Wrenches / Wrenches . . . . . . . . . . . . . . . . . . . . 1-37
Sockets / Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . 1-44
Hacksaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-45
Pry Bars / Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-46
Slide Sledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-47
Shovels and Spades / Level / Tapes . . . . . . . . . . . . . . . 1-49
Gauges / Magnets / Pipe Wrenches . . . . . . . . . . . . . . . 1-50
Cutters / Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-51
Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-52
Chisels / Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-53
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-54
Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-55
Grease Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-56
Torque Wrenches
Click Type and Dial Type Torque Wrenches . . . . . . . . . . 1-58
Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-59
Torque Multipliers / Degree Wheel . . . . . . . . . . . . . . . . 1-60
Testers / Air Regulated Torque Wrench Set . . . . . . . . . 1-61
Pneumatic Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-62
Hydraulic Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-63
Hydraulic Pumps / Impact Wrench . . . . . . . . . . . . . . . . 1-65
Pneumatic Tools
Impact Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-66
Sanders and Polishers . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-69
Air Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-70
Air Drills / Air Hammers . . . . . . . . . . . . . . . . . . . . . . . . . 1-71
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-72
Electrical Tools
Grinders / Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-75
Saw Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-76
Casting Salvage
Thread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-77
Crack Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-78
Tool Boxes
Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-79
Metal Storage Chests / Lock . . . . . . . . . . . . . . . . . . . . . 1-82
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-83
Plastic Tool Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-84
Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-85
Slings
Slings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-88
Hand Tools
Hand Tools (Inch)
ID: C33421T1
Consist of 8T-0460 Servicemans Tool Set, 117 Piece Set Consist of 8T-0460 Servicemans Tool Set, 117 Piece Set (contd)
Part No. Description Size Part No. Description Size
3 inch Drive Tools 34 inch Drive Tools (contd)
8
8H-8574 Socket Extension 76.2 mm (3.00 in) long 8H-8546 Breaker Bar 3 in
4
8H-8575 Socket Extension 152.4 mm (6.00 in) long 162-8716 Ratchet Head Handle
8H-8573 Speeder Handle 3 in 8H-8548 Socket Extension 203.2 mm (8.00 in) long
8
8H-8559 Socket Extension 1 in, 279.0 mm (11.00 in) long 4C-9603 Combination Wrench 1 in
2
Consist of 8T-0460 Servicemans Tool Set, 117 Piece Set (contd) Consist of 8T-0460 Servicemans Tool Set, 117 Piece Set (contd)
Part No. Description Size Part No. Description Size
Sockets Designed for Twelve Point Shoulder Bolts Pliers, Punches, Screwdrivers and Hammers (contd)
8S-1602 Tool Box 8H-8579 Punch1 .38 in Point, 203.2 mm (8.00 in) long
261-0444 Adapter 1 in Female to 3 in Male 8H-8578 Punch1 .56 in Point, 241.3 mm (9.50 in) long
2 8
8S-1592 Socket 7 in 6V-6192 Slip Joint Pliers 190.5 mm (7.50 in) long
16
8S-1596 Socket 11 in 8H-8580 Straight Blade Scraper1 38.1 mm (1.50 in) wide
16
8S-1598 Socket 13 in 6V-7933 Plastic Handle Screwdriver 5 in tip, 277.11 mm (10.91 in) long
16 16
8S-1599 Socket 7 in 277-8790 Plastic Handle Screwdriver 452.0 mm (17.79 in) Blade
8
8S-1600 Socket 15 in 6V-7934 Screwdriver No. 2 Phillips tip, 213.6 mm (8.41 in) long
16
Pliers, Punches, Screwdrivers and Hammers 6V-7936 Screwdriver No. 1 Phillips tip, 169.2 mm (6.66 in) long
8H-8577 Ball Peen Hammer1 2 lb 6V-7938 Screwdriver 1
4 in tip, 100.1 mm (3.94 in) long
1S-0257 Ball Peen Hammer1 12 oz 6V-7932 Screwdriver 3
8 in tip, 342.1 mm (13.47 in) long
1S-0258 Soft Face Hammer1 32 oz 5F-4764 Crowfoot Bar1 406.4 mm (16.00 in) long
8H-8581 Feeler Gauge1 25 blade, .0015 in - .025 in 1 Warranty: Six Months
1F-1159 Center Punch1 3
16 in, 152.4 mm (6.00 in) long
ID: C33528T1
Consist of 8T-0461 Servicemans Tool Set, 95 Piece Set Consist of 8T-0461 Servicemans Tool Set, 95 Piece Set (contd)
Part No. Description Size Part No. Description Size
1 inch Drive Tools 3 inch Drive Tools
4 8
9S-1717 Socket 3 3
8 in 8H-8566 Universal Socket 4 in
9S-1718 Socket 7 in 8S-2274 Socket 3 in
16 8
Hand Tools
Consist of 8T-0461 Servicemans Tool Set, 95 Piece Set (contd) Consist of 8T-0461 Servicemans Tool Set, 95 Piece Set (contd)
Part No. Description Size Part No. Description Size
1 inch Drive Tools Pliers, Punches, Screwdrivers and Hammers
2
1S-0259 Socket 1 in 1F-1159 Center Punch1 3 in, 152.4 mm (6.00 in) long
2 16
9S-1730 Socket 118 in 6V-7936 Screwdriver No. 1 Phillips tip, 169.2 mm (6.66 in) long
9S-1731 Socket 114 in 6V-7934 Screwdriver No. 2 Phillips tip, 213.6 mm (8.41 in) long
239-6826 Reversible Ratchet 1 in 6V-6193 Diagonal Cutter 109.5 mm (7.50 in)
2
8H-8559 Socket Extension 279.0 mm (11.00 in) 6V-6194 Needle Nose Pliers 406.4 mm (16.00 in)
9S-1732 Socket Extension 127.0 mm (5.00 in) 6V-6192 Slip Joint Pliers 191.8 mm (7.50 in)
Combination Wrenches 6V-6195 Interlocking Joint Pliers 234.7 mm (9.25 in)
8H-8501 Open End Wrench (2) 1 in x 916 in 1S-0257 Ball Peen Hammer1 340.2 g (12 oz)
2
4C-9604 Combination Wrench 1 in 1S-0258 Soft Face Hammer1 907.2 g (32 oz)
4
4C-9605 Combination Wrench 5 in (Serviceable parts of the hammer 1 Medium Tip 3S-0460, 1 Hard Tip 3S-0459)
16
A specially selected set of basic hand tools for students in the Caterpillar Model Dealer Service Technician Program Part No. Description
Premier quality tools for the work done in th classroom and on the job 1U-5545 Metric Wrench Group
Over 200 tools 1U-7321 Standard Flashlight
2P-5490 Well Socket Group
5P-1720 Seal Pick
5P-3277 Measuring Tape
5P-3920 Steel Rule
8T-0461 Servicemans Tool Group
139-2645 Safety Glasses
146-2728 Flex Pickup Tool
194-3574 Metric Socket Set
194-3576 Metric Socket Set
194-3578 Metric Socket Set
194-3584 Torx Socket Set
194-3585 Hex Bit Socket Set
199-6156 Metric Socket Set
199-9019 Metric Socket Set
200-1928 Fractional Hex Key Set
200-1929 Metric Hex Key Set
200-1931 Metric Hex Key Set
200-8413 Metric Socket Set
ID: D00497T1
For routine maintenance and adjustment of all rubber-tired machines (Wheel Loaders, Motor Graders,
Skidders, Solid Frame Off Highway Trucks, Wheel Tractors, Backhoe Loaders and Integrated Toolcarriers)
4C-9595 Combination Wrench, 916 in 8H-8553 Socket, 1316 in, 12 in drive, 12 Pt.
4C-9596 Combination Wrench, 58 in 8H-8554 Socket, 78 in, 12 in drive, 12 Pt.
4C-9597 Combination Wrench, 1116 in 8H-8555 Socket, 1516 in, 12 in drive, 12 Pt.
4C-9598 Combination Wrench, 3 in 8H-8559 Socket Extension, 12 in drive,
4
5F-4764 Pry Bar, 406.4 mm (16.00 in) long 8H-8581 Feeler Gauge, 25 blade,
.0015 in to .025 in
6V-7932 Screwdriver, Standard in tip, 3
8
323.9 mm (12.75 in) long 9S-1730 Socket, 118 in, 12 in drive, 12 Pt. ID: C66976T1
6V-7934 Screwdriver, PHILLIPS No.2, 9S-1731 Socket, 114 in, 12 in drive, 12 Pt.
213.6 mm (8.41 in) long 185-3630 Filter Strap Wrench
8F-9866 Grease Gun 212-8144 Petcock Socket, 12 in drive
8H-8536 Socket, 1516 in, 34 in drive, 12 Pt. 212-8145 Drain Plug Socket,
1 in Female, 3 in Male
8H-8537 Socket, 112 in, 34 in drive, 12 Pt. 2 4
8H-8538 Socket, 11116 in, 34 in drive, 12 Pt. 213-1985 Sliding T-Handle, 12 in drive,
304.8 mm (12.00 in) long
Hand Tools
214-6153 Hand Tool Group
Warranty: See individual part number
Use for routine maintenance adjustments on rear engine Track-Type Loaders such as the 943, 953, 963 and 973
Used to perform routine maintenance and adjustment operations Part No. Description
Group contains 25 individual hand tools Hand wrench sizes SAE,
Features both English and Metric wrenches and sockets 3 , 13 , 11 , 13
4 16 and 158 in
8 8
Includes Cat grease gun, filter wrench and tire pressure gauge Hand wrench sizes, (Metric)
Canvas bag provides adequate storage even in limited space 10.0, 13.0, 16.0, 18.0 and 19.0 mm
Socket sizes, (Metric)
10.0, 13.0, 16.0 and 19.0 mm x 38 in drive
Screwdrivers, #2 Phillips and 14 in flat
Pliers, 1 slip joint
Ratchet, 38 in drive
Adapter, 38 in female to 12 in male
Extension, 152.4 mm (6.00 in) x 38 in drive
Torx Socket drivers, T30 and T50 x 38 in drive
8F-9866 Grease gun w/Flex Hose
ID: C78558T1
1P-0545 Tire Pressure Gauge
185-3630 Strap wrench
Tool Bag
Hand Tools
214-7219 Hand Tool Group
Warranty: See individual part number
Open end wrenches 10.0, 11.0, 12.0, 13.0, 16.0, 17.0, 18.0, and 19.0 mm
Hex wrench 4.0 mm
Screwdrivers #2 Phillips and 14 in flat tip
Ball peen hammer 16 oz.
Adjustable wrench 8.00 in
Filter band wrench 334 in diameter
T-bar and sliding head 12.00 in long x 12 in square drive
Deep socket 118 in, 6 point, 12 in square drive
ID: C79736T1
Hand Tools
207-1515 Hand Tool Set
SMCS Code: 0600
Model: All
Warranty: See below
256-4816 Hand Tool Group Part No. Description Part No. Description
Model: All 239-6826 Reversible Ratchet, 12 in drive 6V-9102 Combination Wrench, 22.0 mm
Warranty: See individual part number
9S-1732 Socket Extension, 12 in drive, 6V-9103 Combination Wrench, 24.0 mm
127.0 mm (5.00 in) long 6V-9104 Combination Wrench, 30.0 mm
Used for routine maintenance and adjustment 194-3565 Socket, 30 mm, 12 in drive, 12 Pt. 214-7223 Combination Wrench, 36.0 mm
Flat top tool box provides adequate storage for 199-6154 Socket, 24 mm, 12 in drive, 12 Pt.
all tools in this group 214-7329 Open End Wrench, 41.0 mm
213-6926 Impact Socket, 10.0 mm, 12 in drive, 6 Pt. 214-7322 Adjustable Wrench, 8 in
Using proper tools reduces downtime
213-6927 Impact Socket, 11.0 mm, 12 in drive, 6 Pt. 200-1929 Hex Key Socket, Metric
213-6929 Impact Socket, 13.0 mm, 12 in drive. 6 Pt. 214-7324 Torx Bit Set
6V-9111 Socket, 16.0 mm, 12 in drive, 12 Pt. 256-4879 Torx Wrench, T50
6V-9113 Socket, 18.0 mm, 12 in drive, 12 Pt. 185-3630 Filter Strap Wrench
6V-9116 Socket, 22.0 mm, 12 in drive, 12 Pt. 8F-9866 Grease Gun
1U-7585 Hex Wrench, 58 in 9U-7968 Pry Bar
6V-9096 Combination Wrench, 16.0 mm 6V-7932 Standard Screwdriver, 38 in tip,
6V-9098 Combination Wrench, 18.0 mm 323.9 mm (12.75 in) long
6V-9099 Combination Wrench, 19.0 mm 8H-8577 Ball Peen Hammer, 2 lb
6V-9101 Combination Wrench, 21.0 mm 9U-6219 Tool Box
213-9965 Socket Set, 10 Piece, 14 inch Drive Size Part No. Length
Warranty: See individual part number 3
16 in 213-9967 50.8 mm (2.00 in)
7 in 213-9968 50.8 mm (2.00 in)
32
6 point 1 in 213-9969 50.8 mm (2.00 in)
4
1 inch square drive
4 9 in 213-9970 50.8 mm (2.00 in)
32
Deep length sockets 5 in 213-9971 50.8 mm (2.00 in)
16
Chrome finish 11 in 213-9972 50.8 mm (2.00 in)
32
Includes socket bar and clips 3 in 213-9974 50.8 mm (2.00 in)
8
7 in 213-9978 50.8 mm (2.00 in)
16
1 in 213-9980 50.8 mm (2.00 in)
2
9 in 213-9981 50.8 mm (2.00 in)
ID: C33405T1 16
12 point
38 inch square drive
Chrome finish
214-1143 Socket Set, 7 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 3
8 in 214-1144 23.1 mm (0.91 in)
7 in 214-1145 23.1 mm (0.91 in)
16
6 point 1 in 214-1146 23.9 mm (0.94 in)
2
3 inch square drive
8 9 in 214-1147 26.2 mm (1.03 in)
16
Standard length sockets 5 in 214-1148 27.7 mm (1.09 in)
8
Chrome finish 11 in 214-1149 28.7 mm (1.13 in)
16
ID: D00437T1
Includes socket bar and clips 3 in 214-1150 30.2 mm (1.19 in)
4
SAE / Metric impact sockets quickly and easily remove damaged or rounded nuts and bolts
6 fluted sockets grip onto fastener and tighten as more torque is applied (no hammering required to install socket over fastener)
Applications include oil pan drain plugs, exhaust manifold nuts, studs, pipe nipples, and corroded marine fasteners
Shallow depth
Size Part No. Length
Fits sizes from 10 to 19 mm (38 to 34 inch)
10 mm 241-0860 31.8 mm (114 in)
3 inch square drive
8
12 mm 241-0861 31.8 mm (114 in)
Standard length
13 mm 241-0862 31.8 mm (114 in)
Industrial black finish
14 mm 241-0863 31.8 mm (114 in)
Includes plastic tray, socket bar, and clips
15 mm 241-0864 31.8 mm (114 in)
Can be ordered by set or individual
17 mm 241-0865 31.8 mm (114 in)
3 in 241-0866 31.8 mm (114 in)
8
Hand Tools
214-1151 Socket Set, 9 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 3
8 in 214-1152 54.0 mm (2.13 in)
7 in 214-1153 54.0 mm (2.13 in)
16
6 point 1
2 in 214-1154 60.3 mm (2.38 in)
3 inch square drive 9 in 214-1155 60.3 mm (2.38 in)
8 16
Deep length sockets 5
8 in 214-1156 60.3 mm (2.38 in)
Polished chrome finish 11
16 in 214-1157 66.7 mm (2.63 in)
Includes socket bar and clips 3
4 in 214-1158 66.7 mm (2.63 in)
13 in 214-1159 69.9 mm (2.75 in)
16
7 in 214-1160 69.9 mm (2.75 in)
8
ID: C33206T1
214-6490 Socket Set, 9 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 3
8 in 214-6491 54.1 mm (2.13 in)
7 in 214-6492 54.1 mm (2.13 in)
16
12 point 1
2 in 214-6493 60.5 mm (2.38 in)
3 inch square drive 9
8 16 in 8S-2357 60.5 mm (2.38 in)
Deep length sockets 5
8 in 9S-5031 60.5 mm (2.38 in)
Chrome finish 11
16 in 214-6494 66.8 mm (2.63 in)
Includes socket bar and clips 3
4 in 214-6495 66.8 mm (2.63 in)
ID: D00443T1
13 in 214-6496 69.9 mm (2.75 in)
16
7 in 6V-0199 69.9 mm (2.75 in)
8
271-4600 Impact Socket Set, 12 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 5
16 in 271-4601 22.2 mm (.87 in)
3 in 271-4602 23.8 mm (.94 in)
8
6 point 7
16 in 271-4603 23.8 mm (.94 in)
3 inch drive 1
8 2 in 271-4604 23.8 mm (.94 in)
Standard length sockets 9
16 in 271-4605 23.8 mm (.94 in)
Includes socket bar and clips 5
8 in 271-4606 23.8 mm (.94 in)
11 in 271-4607 26.2 mm (1.03 in)
16
3 in 271-4608 26.2 mm (1.03 in)
4
13 in 271-4609 30.2 mm (1.19 in)
ID: D01750T1 16
7 in 271-4610 32.5 mm (1.28 in)
8
15 in 271-4611 33.3 mm (1.31 in)
16
ID: D01744T1
271-4669 Impact Socket Set, 12 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 5 in 271-4670 54.0 mm (2.13 in)
16
3 in 271-4671 54.0mm (2.13 in)
8
6 point 7
16 in 271-4672 54.0mm (2.13 in)
3 inch drive 1 in 271-4673 54.0mm (2.13 in)
8 2
Deep length sockets 9
16 in 271-4674 60.3mm (2.37 in)
Includes socket bar and clips 5
8 in 271-4675 60.3mm (2.37 in)
11 in 271-4676 74.6mm (2.94 in)
16
3 in 271-4677 69.9mm (2.75 in)
4
13 in 271-4678 69.9mm (2.75 in)
16
ID: D01738T1 7 in 271-4679 69.9mm (2.75 in)
8
15 in 271-4680 69.9mm (2.75 in)
16
2P-5520 Open-End Crowfoot Wrench Group, 9 piece, 38 inch Drive Size Part No. Drive
Warranty: See individual part number 3
8 in 2P-5487 3
8 in
7 in 2P-5488 3 in
16 8
Can be used with 38 inch drive 1 in 2P-5489 3 in
2 8
ratchet or torque wrenches 9 3
16 in 2P-5491 8 in
5 in 2P-5492 3 in
8 8
11 in 2P-5493 3 in
16 8
3 in 2P-5494 3 in
4 8
13 in 2P-5495 3 in
16 8
7 in 2P-5496 3 in
8 8
ID: 77271-1T1
1 in 5P-0331 3 in
8
1116 in 5P-0332 3
8 in
118 in 5P-0333 1
2 in
ID: C58235T1 114 in 5P-0334 1
2 in
138 in 5P-0335 1
2 in
Optional Wrenches (not included in 5P-0336)
1516 in 1U-5536 1
2 in
11116 in 5P-0294 1
2 in
9S-1748 Socket Set, 16 Piece, 12 inch Drive Size Part No. Length
Warranty: See individual part number 1 in 1S-0259 38.1 mm (1.50 in)
2
9 in 8H-8549 38.1 mm (1.50 in)
16
12 point 5
8 in 8H-8550 38.1 mm (1.50 in)
12 inch square drive 11
16 in 8H-8551 38.1 mm (1.50 in)
Chrome finish 3
4 in 8H-8552 38.1 mm (1.50 in)
13 in 8H-8553 38.1 mm (1.50 in)
16
Accessories Included
7 in 8H-8554 38.1 mm (1.50 in)
8
Part No. Description Size
15 in 8H-8555 38.1 mm (1.50 in)
16
239-6826 Reversible Ratchet
1 in 8H-8556 38.1 mm (1.50 in)
168-0383 Breaker Bar
1116 in 9S-1729 41.3 mm (1.63 in)
8H-8559 Socket Extension 279.0 mm (11.00 in)
118 in 9S-1730 44.5 mm (1.75 in)
9S-1732 Socket Extension 127.0 mm (5.00 in)
114 in 9S-1731 47.6 mm (1.88 in)
ID: C79417T1
214-6498 Socket Set, 12 Piece, 12 inch Drive Size Part No. Length
Warranty: See individual part number 7 in 214-6500 38.1 mm (1.50 in)
16
1 in 214-6501 38.1 mm (1.50 in)
2
6 point 9
16 in 214-6503 38.1 mm (1.50 in)
1 inch square drive
2 5
8 in 214-6504 38.1 mm (1.50 in)
Standard length socketss 11
16 in 214-6506 38.1 mm (1.50 in)
Chrome finish 3
4 in 214-6507 38.1 mm (1.50 in)
ID: C33207T1
Includes socket bar and clips 13
16 in 214-6509 38.1 mm (1.50 in)
7 in 214-6510 38.1 mm (1.50 in)
8
15 in 214-6511 38.9 mm (1.53 in)
16
Hand Tools
2P-5490 Deep Well Socket Set, 9 Piece, 12 inch Drive Size Part No. Length
Warranty: See individual part number 1
2 in 2P-5475 82.6 mm (3.25 in)
9 in 2P-5476 82.6 mm (3.25 in)
16
6 point 5
8 in 2P-5477 82.6 mm (3.25 in)
1 inch square drive 11
2 16 in 2P-5478 82.6 mm (3.25 in)
Chrome finish 3
4 in 2P-5479 82.6 mm (3.25 in)
Includes socket bar and clips 13
16 in 2P-5481 82.6 mm (3.25 in)
7 in 2P-5482 82.6 mm (3.25 in)
8
15 in 2P-5483 82.6 mm (3.25 in)
16
ID: C07892T1
1 in 2P-5484 82.6 mm (3.25 in)
213-3086 Impact Socket Set, 11 Piece, 213-3515 Impact Socket Set, 12 Piece,
1 inch Drive 1 inch Drive
2 2
Warranty: See individual part number Warranty: See individual part number
6 point 6 point
1 inch square drive 1 inch square drive
2 2
Standard length sockets Deep length sockets
Black oxide finish Black oxide finish
Includes socket bar and clips Includes socket bar and clips
ID: D00449T1 ID: D00455T1
214-1161 Socket Set, 11 Piece, 12 inch Drive Size Part No. Length
Warranty: See individual part number 1
2 in 214-1162 82.6 mm (3.25 in)
9 in 214-1163 82.6 mm (3.25 in)
16
12 point 5 in 214-1164 82.6 mm (3.25 in)
8
1 inch square drive
2 11 in 214-1165 82.6 mm (3.25 in)
16
Deep length sockets 3 in 214-1166 82.6 mm (3.25 in)
4
Polished chrome finish 13 in 214-1167 82.6 mm (3.25 in)
16
Includes socket bar and clips ID: C80487T1 7 in 214-1168 82.6 mm (3.25 in)
8
15 in 214-1169 82.6 mm (3.25 in)
16
9S-1747 Universal Socket Set, 7 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 3 in 8S-2284 40.1 mm (1.58 in)
8
7 in 8H-8562 40.1 mm (1.58 in)
16
12 point 1
2 in 8H-8563 42.1 mm (1.66 in)
38 inch universal drive 9
16 in 8H-8564 42.8 mm (1.69 in)
Polished chrome finish 5
8 in 8H-8565 44.5 mm (1.75 in)
11 in 9S-1727 49.6 mm (1.95 in)
16
ID: B46815T1 3 in 8H-8566 50.4 mm (1.98 in)
4
ID: D00708T1
ID: C33411T1
ID: D01125T1
Hand Tools
5S-6093 Heavy-Duty Socket Set, 17 Piece, 1 inch Drive
Warranty: See individual part number
6 point
1 inch square drive
Black oxide finish
ID: C07895T1
Seven 38 inch drive hex sockets and three 12 inch drive hex sockets Individual Hex Sockets
Includes socket bar and clips and Replacement Hex Bits
Socket Replacement
Hex Size Drive Assembly Hex Bit
1 in 3 in 2P-8263 2P-8269
Hex Sq. Drive 8 8
Size Size Part No. Overall Length 5
32 in 3
8 in 2P-8264 2P-8271
1 in 3 in 2P-8263 52.39 (2.06 in) 3 3
8 8 16 in 8 in 2P-8265 2P-8272
5 in 3 in 2P-8264 52.39 (2.06 in) 7 3
32 8 32 in 8 in 8T-3042 8T-3043
3 in 3 in 2P-8265 52.39 (2.06 in) 1 3
16 8 4 in 8 in 2P-8266 2P-7274
7 in 3 in 8T-3042 52.39 (2.06 in) 1
32 8 4 in 2P-8273 1
1 in 3 in 2P-8266 52.39 (2.06 in) 5 3
4 8 16 in 8 in 2P-8267 2P-7274
5 in 3 in 2P-8267 52.39 (2.06 in) 3 3
16 8 8 in 8 in 2P-8268 2P-8275
3 3
8 in 8 in 2P-8268 53.18 (2.09 in) 9
16 in 3
8 in 5P-7253 5P-7252
1 in 1 in 214-7320 53.18 (2.09 in) 1 1
ID: C33212T1
2 2 2 in 2 in 214-7320 214-7321
9 in 1 in 214-7327 53.18 (2.09 in) 9 1
16 2 16 in 2 in 214-7327 1P-3566
5 in 1 in 214-7328 53.18 (2.09 in) 5 1
8 2 8 in 2 in 214-7328 214-7331
1 Standard hex bit without socket
Four 14 inch drive hex ball sockets and four 38 inch drive hex ball sockets Hex Size Sq. Drive Size Part No. Overall Length
Material: steel 1
8 in 1
4 in 243-5178 47.63 mm (178 in)
Includes socket bar and clips 9
64 in 1
4 in 243-5179 47.63 mm (178 in)
5 in 1 in 243-5180 47.63 mm (178 in)
32 4
3 in 1 in 243-5181 49.21 mm (11516 in)
16 4
7 3 52.39 mm (2116 in)
32 in 8 in 243-5175
1 in 3 in 243-5177 52.39 mm (2116 in)
4 8
5 in 3 in 243-5173 53.18 mm (2 332 in)
16 8
3 in 3 in 243-5174 53.18 mm (2 332 in)
8 8
ID: D01131T1
ID: D00533T1
Hand Tools
Individual Sockets, 14 through 112 inch Drive
Warranty: Lifetime
Individual Sockets, 38 inch Drive
All sockets are chrome finish unless otherwise stated
3 inch Drive, Universal Sockets, 12 Point
8
3 inch Drive, Deep Length Sockets, 6 Point, Chrome
Size Part No. Length 8
3
8 in 8S-2284 40.1 mm (1.58 in) Size Part No. Length
7 3 in 214-1152 54.0 mm (2.13 in)
16 in 8H-8562 40.1 mm (1.58 in) 8
1 7 in 214-1153 54.0 mm (2.13 in)
2 in 8H-8563 42.1 mm (1.66 in) 16
9 1 in 214-1154 60.3 mm (2.38 in)
16 in 8H-8564 42.8 mm (1.69 in) 2
5 9 in 214-1155 60.3 mm (2.38 in)
8 in 8H-8565 44.5 mm (1.75 in) 16
11 5 in 214-1156 60.3 mm (2.38 in)
16 in 9S-1727 49.6 mm (1.95 in) 8
3 11 in 214-1157 66.7 mm (2.63 in)
4 in 8H-8566 50.4 mm (1.98 in) 16
3 in 214-1158 66.7 mm (2.63 in)
4
13 in 214-1159 69.9 mm (2.75 in)
3 inch Drive, Standard Length Sockets, 12 Point 16
8
7 in 214-1160 69.9 mm (2.75 in)
Size Part No. Length 8
ID: C33413T1 3
8 in 8S-2274 23.0 mm (.91 in)
7 3 inch Drive, Standard Length Impact Sockets, 6 Point
Individual Sockets, 14 inch Drive 16 in 8H-8567 23.0 mm (.91 in) 8
1
2 in 8H-8568 23.8 mm (.94 in) Size Part No. Length
1 inch Drive, Standard Length Sockets, 12 Point 5
4 9
16 in 8H-8569 24.6 mm (.97 in) 16 in 271-4601 22.2 mm (.87 in)
Size Part No. Length 5
8 in 8H-8570 26.2 mm (1.03 in) 3
8 in 271-4602 23.8 mm (.94 in)
3 in 9S-1711 22.2 mm (.88 in) 7
16 11
16 in 9S-1728 27.0 mm (1.06 in) 16 in 271-4603 23.8 mm (.94 in)
7 in 9S-1712 22.2 mm (.88 in) 1
32 3
4 in 8H-8571 27.8 mm (1.09 in) 2 in 271-4604 23.8 mm (.94 in)
1 in 9S-1713 22.2 mm (.88 in) 9
4 1
4 in1 8S-1589 31.8 mm (1.25 in) 16 in 271-4605 23.8 mm (.94 in)
9 in 9S-1714 22.2 mm (.88 in) 5
32 5
16 in1 8S-1590 31.8 mm (1.25 in) 8 in 271-4606 23.8 mm (.94 in)
5 in 9S-1715 22.2 mm (.88 in) 11
16 3
8 in1 8S-1591 38.1 mm (1.50 in) 16 in 271-4607 26.2 mm (1.03 in)
5 in2 5P-0127 31.8 mm (1.25 in) 3
16 7
16 in1 8S-1592 38.1 mm (1.50 in) 4 in 271-4608 26.2 mm (1.03 in)
11 in 9S-1716 22.2 mm (.88 in) 13
32 1 Shoulder bolt socket 12 point 16 in 271-4609 30.2 mm (1.19 in)
3 in 9S-1717 22.2 mm (.88 in) 7
8 8 in 271-4610 32.5 mm (1.28 in)
7 in 9S-1718 22.2 mm (.88 in) 15
16 3 inch Drive, Deep Length Sockets, 12 Point, Chrome 16 in 271-4611 33.3 mm (1.31 in)
8
1 in 9S-1719 22.2 mm (.88 in)
2
Size Part No. Length 1 in 271-4612 25.4 mm (1.00 in)
3 in1 9S-2573 50.8 mm (2.00 in)
8 3
8 in 214-6491 54.1 mm (2.13 in)
1 Deep length socket 7 3 inch Drive, Deep Length Impact Sockets, 12 Point
16 in 214-6492 54.1 mm (2.13 in) 8
2 Deep length socket, 6 point 1
2 in 214-6493 60.5 mm (2.38 in) Size Part No. Length
9 3 in 271-4615 22.2 mm (.87 in)
16 in 8S-2357 60.5 mm (2.38 in) 8
1 inch Drive, Universal Sockets, 12 Point 7
4 5
8 in 9S-5031 1 60.5 mm (2.38 in) 16 in 271-4616 23.8 mm (.94 in)
Size Part No. Length 11
16 in 214-6494 66.8 mm (2.63 in) 1
2 in 271-4617 23.8 mm (.94 in)
5 in 5P-4200 31.8 mm (1.25 in) 9
16 3
4 in 214-6495 66.8 mm (2.63 in) 16 in 271-4618 23.8 mm (.94 in)
13 5 in 271-4619 23.8 mm (.94 in)
16 in 214-6496 69.9 mm (2.75 in) 8
1 7 11 in 271-4620 26.2 mm (1.03 in)
4 inch Drive, Deep Length Sockets, 6 Point, Chrome 8 in 6V-0199 69.9 mm (2.75 in) 16
1 Comes 3 in 271-4621 26.2 mm (1.03 in)
Size Part No. Length with insert for removing spark plugs 4
3 in 213-9967 50.8 mm (2.00 in)
16
7 in 213-9968 50.8 mm (2.00 in) 3
32 3
8 inch Drive, Standard Length Sockets, 6 Point, 8 inch Drive, Deep Length Impact Sockets, 6 Point
1
4 in 213-9969 50.8 mm (2.00 in) Chrome Size Part No. Length
9
32 in 213-9970 50.8 mm (2.00 in) Size Part No. Length 5
16 in 271-4670 54.0 mm (2.13 in)
5 3 in 214-1144 23.1 mm (0.91 in)
16 in 213-9971 50.8 mm (2.00 in) 8 3
8 in 271-4671 54.0mm (2.13 in)
11 7 in 214-1145 23.1 mm (0.91 in)
32 in 213-9972 50.8 mm (2.00 in) 16 7
16 in 271-4672 54.0mm (2.13 in)
3 1 in 214-1146 23.9 mm (0.94 in)
8 in 213-9974 50.8 mm (2.00 in) 2 1
2 in 271-4673 54.0mm (2.13 in)
7 9 in 214-1147 26.2 mm (1.03 in)
16 in 213-9978 50.8 mm (2.00 in) 16 9
16 in 271-4674 60.3mm (2.37 in)
1 5 in 214-1148 27.7 mm (1.09 in)
2 in 213-9980 50.8 mm (2.00 in) 8 5
8 in 271-4675 60.3mm (2.37 in)
9 11 in 214-1149 28.7 mm (1.13 in)
16 in 213-9981 50.8 mm (2.00 in) 16 11
16 in 271-4676 74.6mm (2.94 in)
3 214-1150 30.2 mm (1.19 in) 3
4 4 in 271-4677 69.9mm (2.75 in)
13 in 271-4678 69.9mm (2.75 in)
16
7 in 271-4679 69.9mm (2.75 in)
8
15 in 271-4680 69.9mm (2.75 in)
16
Size Part No. Length Size Part No. Length Size Part No. Length
7 in 214-6497 38.1 mm (1.50 in) 1 in 2P-5475 82.6 mm (3.25 in) 3 in 8H-8529 50.8 mm (2.00 in)
16 2 4
1 in 1S-0259 38.1 mm (1.50 in) 9 in 2P-5476 82.6 mm (3.25 in) 7 in 8H-8530 50.8 mm (2.00 in)
2 16 8
9 in 8H-8549 38.1 mm (1.50 in) 5 in 2P-5477 82.6 mm (3.25 in) 15 in 8H-8531 50.8 mm (2.00 in)
16 8 16
5 in 8H-8550 38.1 mm (1.50 in) 11 in 2P-5478 82.6 mm (3.25 in) 1 in 8H-8532 52.4 mm (2.06 in)
8 16
11 in 8H-8551 38.1 mm (1.50 in) 3 in 2P-5479 82.6 mm (3.25 in) 1116 in 8H-8533 54.0 mm (2.13 in)
16 4
3 8H-8552 38.1 mm (1.50 in) 13 in 2P-5481 82.6 mm (3.25 in) 118 in 8H-8534 55.5 mm (2.19 in)
4 16
13 in 8H-8553 38.1 mm (1.50 in) 7 in 2P-5482 82.6 mm (3.25 in) 114 in 8H-8535 57.2 mm (2.25 in)
16 8
7 in 8H-8554 38.1 mm (1.50 in) 15 in 2P-5483 82.6 mm (3.25 in) 1516 in 8H-8536 58.7 mm (2.31 in)
8 16
15 in 8H-8555 38.1 mm (1.50 in) 1 in 2P-5484 82.6 mm (3.25 in) 112 in 8H-8537 63.5 mm (2.50 in)
16
1 in 8H-8556 38.1 mm (1.50 in) 118 in 5P-7260 82.6 mm (3.25 in) 158 in 8H-8539 66.7 mm (2.63 in)
1116 in 9S-1729 41.3 mm (1.63 in) 11116 in 8H-8538 69.9 mm (2.75 in)
118 in 9S-1730 44.5 mm (1.75 in) 134 in 8H-8540 69.9 mm (2.75 in)
114 in 9S-1731 47.6 mm (1.88 in) 1
2 inch Drive, Standard Length Impact Sockets, 178 in 8H-8541 79.4 mm (3.13 in)
1
2 in1 8S-1593 44.5 mm (1.75 in) 6 Point, Black 2 in 8H-8542 79.4 mm (3.13 in)
9
16 in1 8S-1594 44.5 mm (1.75 in) Size Part No. Length 218 in 8H-8543 82.6 mm (3.25 in)
5 1 in 213-3087 38.1 mm (1.50 in)
8 in1 8S-1595 44.5 mm (1.75 in) 2 2316 in 8H-8544 82.6 mm (3.25 in)
11 9 in 213-3088 38.1 mm (1.50 in)
16 in1 8S-1596 44.5 mm (1.75 in) 16 214 in 8H-8504 82.6 mm (3.25 in)
1 Shoulder 5 in 213-3089 38.1 mm (1.50 in) 5
bolt socket 12 point 8 8 in1 2P-8276 82.6 mm (3.25 in)
11 in 213-3091 38.1 mm (1.50 in) 3
16 4 in1 8S-1597 82.6 mm (3.25 in)
3 in 213-3094 38.1 mm (1.50 in) 13
1
2 inch Drive, Standard Length Sockets, 6 Point, Chrome 4 16 in1 8S-1598 82.6 mm (3.25 in)
13 in 213-3099 38.1 mm (1.50 in) 7
Size Part No. Length 16 8 in1 8S-1599 82.6 mm (3.25 in)
7 in 213-3102 38.1 mm (1.50 in) 15
7
16 in 214-6500 38.1 mm (1.50 in) 8 16 in1 8S-1600 82.6 mm (3.25 in)
15 in 213-3104 44.5 mm (1.75 in)
1
2 in 214-6501 38.1 mm (1.50 in) 16 1 in1 8S-1601 57.2 mm (2.25 in)
9
16 in 214-6503 38.1 mm (1.50 in) 1 in 213-3107 44.5 mm (1.75 in) 212 in2 3P-2230 152.4 mm (6.00 in)
5
8 in 214-6504 38.1 mm (1.50 in) 1116 213-3109 50.8 mm (2.00 in) 1 Shoulder bolt socket 12 point
11
16 in 214-6506 38.1 mm (1.50 in) 118 in 213-3110 50.8 mm (2.00 in) 2 Special socket for fast fill fuel adapter
3 in 214-6507 38.1 mm (1.50 in)
4
13 1 inch Drive, Universal Impact Sockets, 6 Point,
16 in 214-6509 38.1 mm (1.50 in) 2
7
Black
8 in 214-6510 38.1 mm (1.50 in) 3
4 inch Drive, Standard Length Impact Sockets,
15 Size Part No. Length 6 Point, Black
16 in 214-6511 38.9 mm (1.53 in)
1 in 214-6521 73.8 mm (2.91 in)
1 in 214-6512 39.7 mm (1.56 in) 2 Size Part No. Length
9 in 214-6522 73.8 mm (2.91 in) 3
1116 in 214-6513 42.9 mm (1.69 in) 16 4 in 214-6553 44.5 mm (1.75 in)
5 in 214-6523 73.8 mm (2.91 in) 13
118 in 214-6514 44.5 mm (1.75 in) 8 16 in 214-6554 47.8 mm (1.88 in)
11 in 214-6524 77.8 mm (3.06 in) 7
16 8 in 214-6556 47.8 mm (1.88 in)
3 in 214-6526 77.8 mm (3.06 in) 15
1 inch Drive, Deep Length Sockets, 12 Point
4 16 in 214-6557 47.8 mm (1.88 in)
2
Hand Tools
Individual Sockets, 34 inch Drive (contd)
3 inch Drive, Deep Length Impact Sockets, 3 inch Drive, Deep Length Impact Sockets, 3
4 4 4 inch Drive, Tapered Impact Sockets,
6 Point, Black 6 Point, Black (contd) 12 Point, Black
Size Part No. Length Size Part No. Length Size Part No. Length
1 in 214-6599 76.2 mm (3.00 in) 112 in 1U-5715 88.9 mm (3.50 in) 3
4 in 124-0662 127 mm (5 in)
1116 in 214-6600 76.2 mm (3.00 in) 112 in 5P-3054 127 mm (6.00 in)
118 in 227-4397 1 88.9 mm (3.50 in) 1916 in 214-6608 88.9 mm (3.50 in)
118 in 214-6601 76.2 mm (3.00 in) 158 in 214-6609 88.9 mm (3.50 in)
1316 in 5P-3053 2 101.6 mm (4.00 in) 11116 in 6V-7874 88.9 mm (3.50 in)
1316 in 214-6602 82.6 mm (3.25 in) 134 in 214-6611 88.9 mm (3.50 in)
114 in 214-6603 82.6 mm (3.25 in) 11316 in 214-6612 95.3 mm (3.75 in)
1516 in 214-6604 82.6 mm (3.25 in) 178 in 214-6613 95.3 mm (3.75 in)
138 in 214-6605 82.6 mm (3.25 in) 2 in 214-6614 95.3 mm (3.75 in)
1716 in 214-6606 88.9 mm (3.50 in) 1 Special use for 3406 Engine head service
2 Budd wheel socket
Used with 38 inch drive speeder handle to remove and install buttons that hold ROPS Cab headliner in position for air conditioning repairs
Use 3F-4479 Spring Pins as replacements if spring pins (1) become worn or damaged
ID: A24406T1
Sealed heads protect internal components from outside environment which leads to longer product life and reduced maintenance, and prevents gear slippage
Heads forged to exact tolerances for longer tool life and greater head strength
High strength internal mechanism provides longer tool life
Ergonomic handle reduces user fatigue and has a more comfortable grip
Reverse lever can be shifted with one hand which saves time when the gear mechanism needs to be reversed in tight places
Square drive is close to the end of the head, giving maximum accessibility to fasteners in restricted areas
Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish
Drive Smallest
Size Part No. Length Working Arc Repair Kit
1 239-6823 112.3 mm (4.42 in) 12 230-0812
4
3 239-6824 187.0 mm (7.38 in) 12 230-0813
8
1 239-6825 261.9 mm (10.31 in) 10 214-7339
2
Ratchets
Warranty: Lifetime
Sealed heads protect internal components from outside environment which leads to longer product life
and reduced maintenance, and prevents gear slippage
Heads forged to exact tolerances for longer tool life and greater head strength
High strength internal mechanism provides longer tool life
Ergonomic handle reduces user fatigue and has a more comfortable grip
Reverse lever can be shifted with one hand which saves time when the gear mechanism needs to be reversed in tight places
Square drive is close to the end of the head, giving maximum accessibility to fasteners in restricted areas
Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish
Hand Tools
8T-2854 Nozzle Retainer Handle Ratchet Heads
Warranty: Lifetime
Can be used as handle (10 inch long) for any 38 inch drive socket
When used with 5P-0328 Crowfoot Wrench, provides means to hold fuel
nozzle in place while installing fuel lines
ID: C80285T1
Smallest
Head Head Head Working Repair
Size Part No Width Length Depth Arc Kit
3 in 160-6389 63.0 mm 150.9 mm 31.2 mm 11.25 160-6390
4
(2.48 in) (5.94 in) (1.23 in)
1 in 161-3983 79.4 mm 200.0 mm 38.1 mm 12 161-3985
ID: B96379T1 (3.12 in) (7.86 in) (1.51 in)
Drive Part
Size No. Length Width
3 in 8H-8546 93.6 mm (3.67 in) 42.1 mm (1.66 in)
4
ID: C09453T1
Drive
Size Part No. Length
3 in 162-8716 489.0 mm (19.25 in)
4
ID: C80293T1
Socket Extensions
Warranty: Lifetime
Drive Drive
Size Part No. Length Size Part No. Length
1 in 9S-1720 50.8 mm (2.00 in) 1 in 271-4723 2 127.0 mm (5.00 in)
4 2
1 in 9S-1721 101.6 mm (4.00 in) 1 in 271-4724 2 279.0 mm (11.00 in)
4 2
3 in 8H-8574 76.2 mm (3.00 in) 3 in 8H-8548 203.2 mm (8.00 in)
8 4
3 in 3P-2240 304.8 mm (12.00 in) 3 in 8T-9265 1 254.0 mm (10.00 in)
8 4
3 in 8H-8575 152.4 mm (6.00 in) 3 in 8T-5183 1 406.4 mm (16.00 in)
8 4
ID: C80281T1 1
2 in 5P-8676 76.2 mm (3.00 in) 1 in 5S-6076 203.2 mm (8.00 in)
1 in 9S-1732 127.0 mm (5.00 in) 1 in 158-8723 3 476 mm (18.74 in)
2
1 in 8H-8559 279.0 mm (11.00 in) 1 Requires
2 locking pin
1 2 Impact
2 in 271-4722 2 76.2 mm (3.00 in)
3 Double hole extension
Drive
Size Part No. Description Use
1 in 5S-6090 Head 5S-6089 Handle
Heavy-duty adapter and extensions can be used with 112 inch drive impact
wrenches
Allows the use of 1 inch drive sockets instead of the higher priced 112 inch
drive sockets
ID: C07894T1
ID: C07906T1
Item Part No. Description
Replacement
Part No. Description Bit 1 9S-4028 Extension, 1 in drive both ends, 133.4 mm (5.25 in) long
213-4437 Adapter, 14 in Female to 38 in Male 2 9S-4026 Adapter, 112 in to 1 in drive
261-0443 Adapter, 3
8 in Female to 1
4 in Male 261-0446 3 9S-4027 Extension, 1 in drive both ends, 60.3 mm (2.38 in) long
8H-8576 Adapter, 38 in Female to 12 in Male Not shown 207-8160 Extension, 1 in drive, 76.2 mm (3 in) long
261-0444 Adapter, 12 in Female to 38 in Male 261-0447
8H-8561 Adapter, 12 in Female to 34 in Male
261-0445 Adapter, 34 in Female to 12 in Male 261-0448
2P-8261 Adapter, 34 in Female to 1 in Male Universal Joint
5P-3588 Adapter, 1 in Female to 34 in Male Warranty: Lifetime
261-8569 Adapter, 1 in Female to 112 in Male
261-8570 Adapter, 112 in Female to 1 in Male
Drive Size Part No.
1 in 9S-1724
4
3 in 6V-0094
8
1 in 8H-8560
2
ID: A82269T1
1-22 Shop Supplies and Tools Catalog 2007
01a.qxp 10/5/06 1:23 PM Page 23
Hand Tools
Universal Drives 1P-0853 Ratchet Adapter
Warranty: Lifetime
Used with Caterpillar torque multipliers as well as other applications 34 inch female to 34 inch male
Used primarily with the 1P-0850 Torque Multiplier
5P-1749 Convenient for other applications such as with the 34
Use with the 5S-6076 Extension, 5P-1748 Socket, and a suitable torque multiplier to loosen and inch drive 9S-7351 Torque Wrench
tighten the nuts which retain 8D and 9D Ripper mounting brackets
Torque Angular
Drive Size Part No. Capacity Rotation
1 in 5P-1749 1,500 ft lb 30
3 in 5P-3534 1,000 ft lb 30
4
ID: 76005T1
ID: A07680T1
4C-9600 Combination Wrench Set, Standard Length, 11 Piece Size Part No. Length
Warranty: See individual part number 3
8 in 4C-9592 165.1 mm (6.50 in)
7 in 4C-9593 184.15 mm (7.25 in)
16
Polished chrome finish 1 in 4C-9594 204.0 mm (8.03 in)
2
271-4700 Wrench Gripper Rack available 9 in 4C-9595 222.3 mm (8.75 in)
16
5 in 4C-9596 241.3 mm (9.50 in)
8
11 in 4C-9597 260.4 mm (10.25 in)
16
3 in 4C-9598 280.2 mm (11.03 in)
4
13 in 4C-9599 299.2 mm (11.78 in)
16
7 in 4C-9601 318.3 mm (12.53 in)
ID: C07911T2 8
15 in 4C-9602 338.1 mm (13.31 in)
16
4C-9610 Short Length Combination Wrench Set, 9 Piece Size Part No. Length
Warranty: See individual part number 1
4 in 4C-9604 114.3 mm (4.50 in)
5 in 4C-9605 124.0 mm (4.88 in)
16
Polished chrome finish 3 in 4C-9606 132.6 mm (5.22 in)
8
Includes vinyl bag 7 in 4C-9607 138.2 mm (5.44 in)
16
1 in 4C-9608 146.1 mm (5.75 in)
2
9 in 1S-0254 165.1 mm (6.50 in)
16
5 in 4C-9609 157.2 mm (6.19 in)
8
11 in 4C-9611 167.4 mm (6.59 in)
16
3 in 1S-0253 174.8 mm (6.89 in)
4
ID: C07911T3
Combination Wrenches
Warranty: Lifetime
LENGTH
ID: C07949T2
ID: D01359T1
Tappet wrench
For low torque applications
ID: C79498T1
Hand Tools
1P-3515 Open End Wrench Set, 30 and 60 Offset, 14 Piece
Warranty: Lifetime Size Part No. Length
3 in 1P-3501 122.9 mm (4.84 in)
8
7 in 1P-3502 137.4 mm (5.41 in)
16
1 in 1P-3503 151.6 mm (5.97 in)
2
9 in 1P-3504 166.6 mm (6.56 in)
16
5 in 1P-3505 180.8 mm (7.12 in)
8
11 in 1P-3506 197.6 mm (7.78 in)
16
3 in 1P-3507 210.3 mm (8.28 in)
4
13 in 1P-3508 225.6 mm (8.88 in)
16
7 in 1P-3509 239.8 mm (9.44 in)
8
15 in 1P-3510 254.0 mm (10.00 in)
16
Optional Wrenches (not included in 1P-3515) 1 in 1P-3511 269.0 mm (10.59 in)
138 in 127-2277 356.6 mm (14.04 in) 1116 in 1P-3512 283.5 mm (11.16 in)
ID: C07902T1 112 in 127-2278 385.8 mm (15.19 in) 118 in 1P-3513 298.5 mm (11.75 in)
158 in 127-2279 415.0 mm (16.34 in) 114 in 1P-3514 327.2 mm (12.88 in)
178 in 127-2280 473.2 mm (18.63 in) 1P-3516 Tool Kit Bag (not serviced)
Increased torque wrench box end contacts the fastener Drive Size Part No. Length
on the flats rather than on the corners, preventing rounding 3 in 1P-3501 122.9 mm (4.84 in)
8
of the fastener and allowing for more torque to be applied 7
16 in 1P-3502 137.4 mm (5.41 in)
Concentric or uniform wall thickness on the box end 1
2 in 1P-3503 151.6 mm (5.97 in)
eliminates weak spots while allowing for a thin wall design
9 in 1P-3504 166.6 mm (6.56 in)
for greater accessibility 16
5 in 1P-3505 180.8 mm (7.12 in)
Continuous arc open end design evenly distributes applied 8
stress over the entire radius of the open end, enhancing the 11
16 in 1P-3506 197.6 mm (7.78 in)
wrench strength and life of the tool 3
4 in 1P-3507 210.3 mm (8.28 in)
Long handles for better reach and greater applied torque
Highly polished nickel/chrome plating tough nickel for
corrosion resistance and chrome plating for wear resistance
and a mirror-like finish
ID: il2, D00737T1
Increased torque wrench box end contacts the fastener on the flats rather
than on the corners, preventing rounding of the fastener and allowing for
more torque to be applied
Concentric or uniform wall thickness on the box end eliminates weak spots
while allowing for a thin wall design for greater accessibility
Continuous arc open end design evenly distributes applied stress over the
entire radius of the open end, enhancing the wrench strength and life of the
tool
Long handles for better reach and greater applied torque
Highly polished nickel/chrome plating tough nickel for corrosion
resistance and chrome plating for wear resistance and a mirror-like finish
ID: il2, D00719T1
200-8413 Socket Set, 13 Piece, 14 inch Drive Size Part No. Length
Warranty: See individual part number 4.0 mm 200-8415 22.2 mm (0.87 in)
5.0 mm 200-8417 22.2 mm (0.87 in)
6 point 5.5 mm 200-8418 22.2 mm (0.87 in)
1 inch drive
4 6.0 mm 200-8419 22.2 mm (0.87 in)
Standard length sockets 7.0 mm 200-8420 22.2 mm (0.87 in)
Polished chrome finish 8.0 mm 200-8421 22.2 mm (0.87 in)
Includes socket bar and clips 9.0 mm 200-8422 22.2 mm (0.87 in)
10.0 mm 200-8423 22.2 mm (0.87 in)
ID: C80419T1 11.0 mm 200-8424 22.2 mm (0.87 in)
12.0 mm 200-8426 22.2 mm (0.87 in)
13.0 mm 200-8427 22.2 mm (0.87 in)
14.0 mm 200-8428 22.2 mm (0.87 in)
15.0 mm 200-8429 23.0 mm (0.91 in)
194-3574 Socket Set, 12 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 8.0 mm 194-3480 23.0 mm (0.91 in)
9.0 mm 194-3483 23.0 mm (0.91 in)
12 point 10.0 mm 194-3488 23.0 mm (0.91 in)
3 inch drive 11.0 mm 194-3490 23.0 mm (0.91 in)
8
Standard length sockets 12.0 mm 194-3492 23.8 mm (0.94 in)
Polished chrome finish 13.0 mm 194-3494 24.6 mm (0.97 in)
Includes socket bar and clips 14.0 mm 194-3495 26.2 mm (1.03 in)
15.0 mm 194-3496 27.0 mm (1.06 in)
ID: D00467T1 16.0 mm 194-3497 27.8 mm (1.09 in)
17.0 mm 194-3498 28.6 mm (1.13 in)
18.0 mm 194-3499 28.6 mm (1.13 in)
19.0 mm 194-3500 30.2 mm (1.19 in)
199-9019 Socket Set, 12 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 8.0 mm 199-9023 54.0 mm (2.13 in)
9.0 mm 199-9025 54.0 mm (2.13 in)
12 point 10.0 mm 199-9026 54.0 mm (2.13 in)
3 inch drive
8 11.0 mm 199-9027 54.0 mm (2.13 in)
Deep length sockets 12.0 mm 199-9028 54.0 mm (2.13 in)
Polished chrome finish 13.0 mm 199-9029 54.0 mm (2.13 in)
Includes socket bar and clips 14.0 mm 199-9030 60.3 mm (2.37 in)
15.0 mm 199-9031 60.3 mm (2.37 in)
ID: C80417T1
16.0 mm 199-9032 60.3 mm (2.37 in)
17.0 mm 199-9033 66.7 mm (2.63 in)
18.0 mm 199-9034 66.7 mm (2.63 in)
19.0 mm 199-9035 66.7 mm (2.63 in)
Hand Tools
214-6620 Socket Set, 12 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 8.0 mm 214-6621 23.0 mm (0.91 in)
9.0 mm 214-6623 23.0 mm (0.91 in)
6 point 10.0 mm 214-6624 23.0 mm (0.91 in)
3 inch drive
8 11.0 mm 214-6625 23.0 mm (0.91 in)
Standard length sockets 12.0 mm 214-6626 23.8 mm (0.94 in)
Chrome finish 13.0 mm 214-6627 24.6 mm (0.97 in)
Includes socket bar and clips ID: C33223T1 14.0 mm 214-6628 26.2 mm (1.03 in)
15.0 mm 214-6629 27.0 mm (1.06 in)
16.0 mm 214-6630 27.8 mm (1.09 in)
17.0 mm 214-6631 28.6 mm (1.13 in)
18.0 mm 214-6632 28.6 mm (1.13 in)
19.0 mm 214-6633 30.2 mm (1.19 in)
241-0873 Twist Socket Set, 13 Piece, 38 inch Drive Size Part No. Length
Warranty: Lifetime 10 mm 241-0860 31.8 mm (114 in)
12 mm 241-0861 31.8 mm (114 in)
SAE / Metric impact sockets quickly and easily 13 mm 241-0862 31.8 mm (114 in)
remove damaged or rounded nuts and bolts
14 mm 241-0863 31.8 mm (114 in)
6 fluted sockets grip onto fastener and tighten as more
torque is applied (no hammering required to install socket over 15 mm 241-0864 31.8 mm (114 in)
fastener) 17 mm 241-0865 31.8 mm (114 in)
3 in 241-0866 31.8 mm (114 in)
Applications include oil pan drain plugs, exhaust manifold nuts, studs, pipe 8
nipples, and corroded marine fasteners 11 mm 241-0867 31.8 mm (114 in)
Shallow depth 1
2 in 241-0868 31.8 mm (114 in)
Fits sizes from 10 to 19 mm (38 to 34 inch) 9
16 in 241-0869 31.8 mm (114 in)
38 inch square drive 16 mm 241-0870 31.8 mm (114 in)
Standard length 11
16 in 241-0871 34.9 mm (138 in)
Industrial black finish 19 mm 241-0872 34.9 mm (138 in)
ID: D00971T1
Includes plastic tray, socket bar, and clips
Can be ordered by set or individual
271-4622 Impact Socket Set, 14 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 8.0 mm 271-4623 23.0 mm (0.91 in)
9.0 mm 271-4624 23.0 mm (0.91 in)
6 point
10.0 mm 271-4625 23.0 mm (0.91 in)
3 inch drive
8
11.0 mm 271-4626 23.8 mm (0.94 in)
Standard length sockets
12.0 mm 271-4627 23.8 mm (0.94 in)
Includes socket bar and clips
13.0 mm 271-4628 24.6 mm (0.97 in)
14.0 mm 271-4630 27.0 mm (1.06 in)
15.0 mm 271-4631 27.0 mm (1.06 in)
ID: D01732T1 16.0 mm 271-4632 27.8 mm (1.09 in)
17.0 mm 271-4633 28.2 mm (1.11 in)
18.0 mm 271-4634 29.0 mm (1.14 in)
19.0 mm 271-4635 30.6 mm (1.20 in)
21.0 mm 271-4636 29.5 mm (1.16 in)
24.0 mm 271-4637 33.0 mm (1.30 in)
271-4654 Impact Socket Set, 14 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 8.0 mm 271-4655 23.0 mm (0.91 in)
10.0 mm 271-4656 23.0 mm (0.91 in)
12 point 11.0 mm 271-4657 23.8 mm (0.94 in)
3 inch drive
8 12.0 mm 271-4658 23.8 mm (0.94 in)
Standard length sockets 13.0 mm 271-4659 23.8 mm (0.94 in)
Includes socket bar and clips 14.0 mm 271-4660 27.0 mm (1.06 in)
ID: D01726T1
15.0 mm 271-4661 27.0 mm (1.06 in)
16.0 mm 271-4662 27.8 mm (1.09 in)
17.0 mm 271-4663 28.2 mm (1.11 in)
18.0 mm 271-4664 29.0 mm (1.14 in)
19.0 mm 271-4665 30.6 mm (1.20 in)
20.0 mm 271-4666 30.9 mm (1.22 in)
21.0 mm 271-4667 32.1 mm (1.26 in)
22.0 mm 271-4668 32.9 mm (1.30 in)
271-4638 Impact Socket Set, 14 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 8.0 mm 271-4639 54.0 mm (2.13 in)
9.0 mm 271-4640 54.0 mm (2.13 in)
6 point 10.0 mm 271-4641 54.0 mm (2.13 in)
3 inch drive
8 11.0 mm 271-4642 54.0 mm (2.13 in)
Deep length sockets 12.0 mm 271-4643 54.0 mm (2.13 in)
Includes socket bar and clips 13.0 mm 271-4644 54.0 mm (2.13 in)
14.0 mm 271-4645 60.3 mm (2.37 in)
15.0 mm 271-4646 60.3 mm (2.37 in)
ID: D01720T1 16.0 mm 271-4647 60.3 mm (2.37 in)
17.0 mm 271-4648 66.7 mm (2.63 in)
18.0 mm 271-4650 66.7 mm (2.63 in)
19.0 mm 271-4651 66.7 mm (2.63 in)
21.0 mm 271-4652 66.7 mm (2.63 in)
24.0 mm 271-4653 73.0 mm (2.87 in)
271-4683 Impact Socket Set, 14 Piece, 38 inch Drive Size Part No. Length
Warranty: See individual part number 8 mm 271-4684 54.0 mm (2.13 in)
9 mm 271-4685 54.0 mm (2.13 in)
12 point
10 mm 271-4686 54.0 mm (2.13 in)
3 inch drive
8
11 mm 271-4687 54.0 mm (2.13 in)
Deep length sockets
12 mm 271-4688 54.0 mm (2.13 in)
Includes socket bar and clips
13 mm 271-4689 54.0 mm (2.13 in)
14 mm 271-4690 60.3 mm (2.37 in)
15 mm 271-4691 60.3 mm (2.37 in)
ID: D01714T1
16 mm 271-4692 60.3 mm (2.37 in)
17 mm 271-4693 66.7 mm (2.63 in)
18 mm 271-4694 66.7 mm (2.63 in)
19 mm 271-4695 66.7 mm (2.63 in)
21 mm 271-4696 66.7 mm (2.63 in)
24 mm 271-4697 73.0 mm (2.87 in)
9U-6124 Universal Metric Socket Set, 9 Piece, 38 inch Drive Size Part No. Length
SMCS Code: 1251-010, 0601 10.0 mm 9U-6125 43.5 mm (1.71 in)
Model: 3066 Engine 12.0 mm 9U-6126 45.5 mm (1.79 in)
Warranty: Lifetime
13.0 mm 9U-6127 45.5 mm (1.79 in)
14.0 mm 9U-6128 47.9 mm (1.89 in)
9U-6128 used to remove and install fuel injection pump
15.0 mm 9U-6129 47.9 mm (1.89 in)
Standard length, 12 point universal socket set
16.0 mm 9U-6130 47.9 mm (1.89 in)
Specially forged and heat treated for toughness and
long lifemeets rigid industry standards 17.0 mm 9U-6131 50.7 mm (2.00 in)
Includes socket bar and clips 18.0 mm 9U-6132 50.7 mm (2.00 in)
19.0 mm 9U-6133 52.5 mm (2.07 in)
ID: C54508T1
Hand Tools
227-8209 Crowfoot Wrench
SMCS Code: 1453-010
Model: TH210 and TH215 Telehandler
Warranty: Lifetime
ID: D00357T1
199-6156 Socket Set, 13 Piece, 12 inch Drive Size Part No. Length
Warranty: See individual part number 12.0 mm 199-6149 38.1 mm (1.50 in)
13.0 mm 199-6150 38.1 mm (1.50 in)
12 point 14.0 mm 8T-3041 38.1 mm (1.50 in)
1 inch drive
2 15.0 mm 6V-9110 38.1 mm (1.50 in)
Standard length sockets 16.0 mm 6V-9111 38.1 mm (1.50 in)
Polished chrome finish 17.0 mm 6V-9112 38.1 mm (1.50 in)
Includes socket bar and clips ID: C80288T1 18.0 mm 6V-9113 38.1 mm (1.50 in)
19.0 mm 6V-9114 38.1 mm (1.50 in)
20.0 mm 199-6152 38.1 mm (1.50 in)
21.0 mm 6V-9115 38.1 mm (1.50 in)
22.0 mm 6V-9116 38.1 mm (1.50 in)
23.0 mm 199-6153 38.1 mm (1.50 in)
24.0 mm 199-6154 38.8 mm (1.53 in)
194-3576 Socket Set, 10 Piece, 12 inch Drive Size Part No. Length
Warranty: See individual part number 16.0 mm 194-3505 82.6 mm (3.25 in)
17.0 mm 194-3506 82.6 mm (3.25 in)
12 point
18.0 mm 194-3510 82.6 mm (3.25 in)
1 inch drive
2
19.0 mm 194-3511 82.6 mm (3.25 in)
Deep length sockets
20.0 mm 194-3512 82.6 mm (3.25 in)
Polished chrome finish
21.0 mm 194-3513 82.6 mm (3.25 in)
Includes socket bar and clips
22.0 mm 194-3514 82.6 mm (3.25 in)
ID: C80289T1 24.0 mm 194-3515 82.6 mm (3.25 in)
25.0 mm 194-3516 82.6 mm (3.25 in)
26.0 mm 194-3517 82.6 mm (3.25 in)
213-6923 Impact Socket Set, 12 Piece, 12 Inch Drive Size Part No. Length
Warranty: See individual part number 10.0 mm 213-6926 38.1 mm (1.50 in)
11.0 mm 213-6927 38.1 mm (1.50 in)
6 point 12.0 mm 213-6928 38.1 mm (1.50 in)
1 inch drive
2 13.0 mm 213-6929 38.1 mm (1.50 in)
Black oxide finish 14.0 mm 213-6930 38.1 mm (1.50 in)
Standard length impact sockets 15.0 mm 213-6932 38.1 mm (1.50 in)
Includes socket bar and clips 16.0 mm 213-6933 38.1 mm (1.50 in)
17.0 mm 213-6934 38.1 mm (1.50 in)
18.0 mm 213-6935 38.1 mm (1.50 in)
19.0 mm 213-6936 38.1 mm (1.50 in)
20.0 mm 213-6924 38.1 mm (1.50 in)
21.0 mm 213-6937 38.1 mm (1.50 in)
ID: C33225T1
214-6643 Impact Socket Set, 11 Piece, 12 inch Drive Size Part No. Length
Warranty: See individual part number 10.0 mm 214-6644 82.6 mm (3.25 in)
11.0 mm 214-6645 82.6 mm (3.25 in)
6 point 12.0 mm 214-6646 82.6 mm (3.25 in)
1 inch drive
2 13.0 mm 214-6647 82.6 mm (3.25 in)
Black oxide finish 14.0 mm 214-6648 82.6 mm (3.25 in)
Deep length impact sockets 15.0 mm 214-6649 82.6 mm (3.25 in)
Includes socket bar and clips 16.0 mm 214-6650 82.6 mm (3.25 in)
17.0 mm 214-6651 82.6 mm (3.25 in)
18.0 mm 214-6652 82.6 mm (3.25 in)
19.0 mm 214-6653 82.6 mm (3.25 in)
ID: C80483T1 20.0 mm 214-7346 82.6 mm (3.25 in)
ID: D00708T1
9U-6547 Impact Socket Set, 24 Piece, 34 inch Drive Size Part No. Length
Warranty: See individual part number 27.0 mm 9U-6531 50.8 mm (2.00 in)
28.0 mm 9U-6532 53.8 mm (2.12 in)
6 point
30.0 mm 9U-6533 53.8 mm (2.12 in)
3 inch drive
4
31.0 mm 9U-6534 54.0 mm (2.13 in)
Black oxide finish
32.0 mm 9U-6535 53.8 mm (2.12 in)
Standard length impact sockets
33.0 mm 9U-6536 53.8 mm (2.12 in)
34.0 mm 9U-6537 54.0 mm (2.13 in)
Size Part No. Length
35.0 mm 9U-6538 57.2 mm (2.25 in)
17.0 mm 9U-6523 44.5 mm (1.75 in)
36.0 mm 9U-6539 57.2 mm (2.25 in)
19.0 mm 9U-6524 44.5 mm (1.75 in)
38.0 mm 9U-6540 57.2 mm (2.25 in)
20.0 mm 9U-6525 44.5 mm (1.75 in)
40.0 mm 9U-6541 66.7 mm (2.63 in)
21.0 mm 9U-6526 47.8 mm (1.88 in)
41.0 mm 9U-6542 66.5 mm (2.62 in)
22.0 mm 9U-6527 47.6 mm (1.87 in)
42.0 mm 9U-6543 66.5 mm (2.62 in)
23.0 mm 9U-6528 47.8 mm (1.88 in)
43.0 mm 9U-6544 66.5 mm (2.62 in)
24.0 mm 9U-6529 47.6 mm (1.87 in)
ID: C79418T1 46.0 mm 9U-6545 66.7 mm (2.63 in)
26.0 mm 9U-6530 50.8 mm (2.00 in)
50.0 mm 9U-6546 73.2 mm (2.88 in)
Hand Tools
194-3585 Metric Hex Driver Set, 9 Piece
Warranty: See individual part number
Four 14 inch drive hex ball sockets and four 38 inch drive hex ball sockets Hex Drive Bit Overall
Material: steel Size Size Part No. Length Length
3 mm 1 in 243-5190 47.7 mm (1.88 in)
Includes socket bar and clips 4
ID: D01137T1
Hand Tools
Individual Sockets, 38 inch Drive (contd)
3 inch Drive, Impact Deep Length Sockets, 6 Point,
8
Size Part No. Length Size Part No. Length Size Part No. Length
24.0 mm 6V-9117 50.8 mm (2.00 in) 17.0 mm 9U-6523 44.5 mm (1.75 in) 32.0 mm 9U-6535 54.0 mm (2.13 in)
30.0 mm 6V-9118 57.2 mm (2.25 in) 19.0 mm 9U-6524 44.5 mm (1.75 in) 33.0 mm 9U-6536 53.8 mm (2.12 in)
36.0 mm 6V-9119 58.7 mm (2.31 in) 20.0 mm 9U-6525 44.5 mm (1.75 in) 34.0 mm 9U-6537 54.0 mm (2.13 in)
46.0 mm 6V-9120 73.0 mm (2.87 in) 21.0 mm 9U-6526 47.8 mm (1.88 in) 35.0 mm 9U-6538 57.2 mm (2.25 in)
22.0 mm 9U-6527 47.6 mm (1.87 in) 36.0 mm 9U-6539 57.2 mm (2.25 in)
3 inch Drive, Standard Length Impact Sockets, 12 Point
4 23.0 mm 9U-6528 47.8 mm (1.88 in) 38.0 mm 9U-6540 57.2 mm (2.25 in)
Size Part No. Length 24.0 mm 9U-6529 47.6 mm (1.87 in) 40.0 mm 9U-6541 66.7 mm (2.63 in)
20.0 mm 152-1058 55.5 mm (2.19 in) 26.0 mm 9U-6530 50.8 mm (2.00 in) 41.0 mm 9U-6542 66.5 mm (2.62 in)
27.0 mm 9U-6531 50.8 mm (2.00 in) 42.0 mm 9U-6543 66.5 mm (2.62 in)
3
4 inch Drive, Deep Length Impact Sockets, 6 Point 28.0 mm 9U-6532 53.8 mm (2.12 in) 43.0 mm 9U-6544 66.5 mm (2.62 in)
Size Part No. Length 30.0 mm 9U-6533 53.8 mm (2.12 in) 46.0 mm 9U-6545 66.7 mm (2.63 in)
36.0 mm 175-6797 89.0 mm (3.50 in) 31.0 mm 9U-6534 54.0 mm (2.13 in) 50.0 mm 9U-6546 73.2 mm (12.88 in)
43.0 mm 6V-7874 88.9 mm (3.50 in)
Used to remove and install tires and rims using M36 bolts with 55 mm hex head
Used with 4C-9813 Extension, 6V-6080 Torque Multiplier, 8T-5230 Air Regulated Wrench, and 4C-9814 Reaction Bar
Black industrial finish
High-strength, impact socket Hex size 55 mm (2316 in), six point
Drive size #5 spline
Overall length 94.5 mm (3.72 in)
Diameter 78.6 mm (3.09 in)
ID: C79280T1
Stacking Sockets
Model: 777, 785, 789, 793, 797 Off-Highway Trucks
ID: C80178T1
233-1642 Metric Ratchet Set, 17 Piece Drive Size Part No. Length Description
Warranty: Lifetime 4.0 mm 200-8415 22.2 mm (0.87 in) Socket (14 in Drive)
5.0 mm 200-8417 22.2 mm (0.87 in) Socket (14 in Drive)
Socket contacts the fastener on the flats rather than on the corners, preventing rounding 5.5 mm 200-8418 22.2 mm (0.87 in) Socket (14 in Drive)
of the fastener and allowing for more torque to be applied
6.0 mm 200-8419 22.2 mm (0.87 in) Socket (14 in Drive)
Concentric or uniform wall thickness eliminates weak spots while allowing for a thin
7.0 mm 200-8420 22.2 mm (0.87 in) Socket (14 in Drive)
wall design for greater accessibility
8.0 mm 200-8421 22.2 mm (0.87 in) Socket (14 in Drive)
Creates positive engagement with the drive tool for a tight/slop-free driving system. Detents are
located on all four inner walls ensuring positive engagement with the drive tool in any orientation. 9.0 mm 200-8422 22.2 mm (0.87 in) Socket (14 in Drive)
Hex and drive ends of the socket are countersunk or funnel-shaped, making engagement with the 10.0 mm 200-8423 22.2 mm (0.87 in) Socket (14 in Drive)
fastener or drive tool quicker and easier 11.0 mm 200-8424 22.2 mm (0.87 in) Socket (14 in Drive)
Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish 12.0 mm 200-8426 22.2 mm (0.87 in) Socket (14 in Drive)
13.0 mm 200-8427 22.2 mm (0.87 in) Socket (14 in Drive)
14.0 mm 200-8428 22.2 mm (0.87 in) Socket (14 in Drive)
15.0 mm 200-8429 23.0 mm (0.91 in) Socket (14 in Drive)
1 in 9U-6635 112.3 mm (4.42 in) Ratchet
4
1 in 9S-1720 50.8 mm (2.00 in) Socket Extension
4
1 in 9S-1721 101.6 mm (4.00 in) Socket Extension
4
1 in 9S-1724 Universal Joint
4
Hand Tools
1U-5545 Combination Wrench Set, 14 Piece
Warranty: Lifetime
Increased torque wrench box end contacts the fastener Drive Size Part No. Length
on the flats rather than on the corners, preventing rounding 10.0 mm 6V-9090 171.0 mm (6.73 in)
of the fastener and allowing for more torque to be applied
11.0 mm 6V-9091 184.0 mm (7.24 in)
Concentric or uniform wall thickness on the box end
12.0 mm 6V-9092 195.0 mm (7.68 in)
eliminates weak spots while allowing for a thin wall design
for greater accessibility 13.0 mm 6V-9093 207.0 mm (8.15 in)
Continuous arc open end design evenly distributes applied stress 14.0 mm 6V-9094 219.0 mm (8.62 in)
over the entire radius of the open end, enhancing the wrench 15.0 mm 6V-9095 233.0 mm (9.17 in)
strength and life of the tool 16.0 mm 6V-9096 242.0 mm (9.53 in)
Long handles for better reach and greater applied torque 17.0 mm 6V-9097 256.0 mm (10.08 in)
Highly polished nickel/chrome plating tough nickel for 18.0 mm 6V-9098 267.0 mm (10.51 in)
corrosion resistance and chrome plating for wear resistance
19.0 mm 6V-9099 280.0 mm (11.02 in)
and a mirror-like finish
As special application tools, used to remove and install front steering cylinder linkage knuckle
on Cat vehicles listed below
Forged steel, straight-handled, open end, with black oxide finish
ID: D00515T1
214-7329 Wrench Telescoping Material Handlers RT50, RT60 and RTC60; 214B Hydraulic Excavator
4C-4065 Wrench Telescoping Material Handlers RT50, RT60 and RTC60
ID: D01123T1
Hand Tools
Miscellaneous Hand Tools
ID: C79999T1
Ratchet Wrenches
Warranty: Lifetime
ID: C07367T1
Used to quickly remove and install bolts (Use standard wrench for initial loosening;
bolts cannot be tightened to final torque with ratchet wrench.)
For 30 mm hex bolts
Fits 46 mm (11316 in) bolt heads
Ratcheting style wrench greatly decreases time for removing or installing the many bolts
required to attach swing bearing/gear (Starting and running bolts down until seated, or ID: C66804T1
removing bolts, can take a large amount of time if done with conventional hand tools.)
Reference
SENR6058, 5130 Service Manual Module, Disassembly and Assembly;
SENR6108, 5230 Service Manual Module, Disassembly and Assembly;
SEHS9721 Special Instruction, Assembly Procedure for Hydraulic Excavator (5130 only)
Hex
Part No. Size Torque Capacity
8T-3122 3 in 26 Nm (19 lb ft)
8
Hex
Part No. Size Torque Capacity
8T-3133 1116 in 190 Nm (140 lb ft)
8T-3134 118 in 200 Nm (150 lb ft)
8T-3135 114 in 270 Nm (200 lb ft)
8T-3136 138 in 340 Nm (250 lb ft)
8T-3137 112 in 410 Nm (300 lb ft)
8T-3138 158 in 475 Nm (350 lb ft)
ID: C41282T1
Hex
Part No. Size Torque Capacity
8T-3172 3 in 26 Nm (19 lb ft)
8
Not sold as part of any sets must be ordered individually Part No. Description Hex Size
1U-5732 Wrench Assembly 134 in
1U-5733 Wrench Assembly 178 in
1U-5734 Wrench Assembly 2 in
1U-5735 Wrench Assembly 218 in
Hand Tools
Heavy-Duty Adjustable End Wrenches Jaw Jaw
Part No. Range Thickness Length Weight
8F-2243 69.9-120.7 mm 28.6 mm 914.4 mm 10 kg
Designed for heavy-duty work (234 in-434 in) (118 in) (36 in) (22 lb)
Accommodate many of the larger nuts on Caterpillar and other equipment 8F-2239 34.9-73.0 mm 22.2 mm 609.6 mm 5 kg
(138 in-278 in) (78 in) (24 in) (11 lb)
Cadmium coated to prevent rusting
Jaw adjusts in 18 inch increments
ServiceParts
Component 8F-2243 8F-2239
Movable Jaw 8F-2245 8F-2241
Bolt 8F-2246 8F-2242
Nut 5B-3254 5B-3254
Handle 8F-2240
ID: B44848T1
ID: C79481T1
Adjustable Wrenches
Part No. Jaw Range Length Finish
214-7322 24.0 mm (.94 in) 203.2 mm (8.00 in) Black Oxide
214-7323 29.0 mm (1.13 in) 254.0 mm (10.00 in) Black Oxide
214-7330 33.0 mm (1.31 in) 304.8 mm (12.00 in) Black Oxide
214-7332 42.0 mm (1.66 in) 381.0 mm (15.00 in) Black Oxide
ID: C07910T1
Used for holding cylinders and other irregularly shaped objectsworks for parts of most any size and shape
Special head design for turning wrench in either direction
Ratcheting action makes it possible to regrip without removal
Chain wrench capacity: 12 inch to 434 inch O.D
ID: C33394T1
1U-7608 Chain Wrench
SMCS Code: 5102-017
Model: D6H, D7H and motor graders prior to April 1987 G-Series production Head length 114.3 mm (4 12 in)
Head length 53.97 mm (2 18 in)
Head thickness 34.92 mm (1 38 in)
Used to remove and install threaded crowns on hydraulic cylinders
Chain length 711.2 mm (28 in)
Grips cylindrical objects for assembly or disassembly
Weight .86 kg (1.90 lbs)
Black oxide finish, high carbon steel
Rated capacity 1360 Nm (1000 ft-lb)
Has 19 mm (34 in) square drive
Can be used with breaker bars, ratchets and torque wrenches
Can be used on threaded crowns up to 203 mm (8 in) in diameter
Tool is capable of withstanding in excess of 1000 ft-lb of torque
ID: C58234T1
Shop Supplies and Tools Catalog 2007 1-39
01b.qxp 10/5/06 1:24 PM Page 40
Used to remove and install threaded crown, which is used to retain head on later hydraulic cylinders
General purpose tool that can be used in many applications
Hand Tools
Nut Spanner Wrenches
ID: C07901T1
Special Open End Wrenches 214-7335 Wrench Set, Double End Flare Nut,
3 Piece
Warranty: Lifetime
Fit various nuts, bolt heads, etc. that are too large for ordinary hand tools
ID: C79426T1
Hex Wrenches
SMCS Code: 3200-000, 0721, 3203
Model: All skid steer loaders
Essential Tool
159-3327 242-6163
21.0 mm hex end 24.0 mm hex end
12 inch square drive 12 inch square drive
Used on 287 Multi-Terrain Loader
ID: C80530T1
200-1931 Hex Bit Set, 7 Piece 9S-1742 Hex Bit Set, 9 Piece
ID: C79427T1
ID: C33507T1
200-1928 L Shaped Hex Allen Key 293-3025 Fractional Hex Allen Key
Wrench Group, Inch, 13 Piece Wrench Group with Ball End, Inch,
13 Piece
Sizes: .05 inch, 116 inch, 564 inch, 332 inch,
7 inch, 1 inch, 9 inch, 5 inch, 3 inch,
64 8 64 32 16
7 inch, 1 inch, 5 inch and 3 inch Sizes: .05 inch, 116 inch, 564 inch, 332 inch,
32 4 16 8
7 inch, 1 inch, 9 inch, 5 inch, 3 inch,
64 8 64 32 16
CAT branded plastic holder included 7 inch, 1 inch, 5 inch and 3 inch
32 4 16 8
CAT branded plastic holder included
ID: D01603T1
ID: C80415T1
200-1929 L Shaped Hex Allen Key 293-3026 Metric Hex Allen Key Wrench
Wrench Group, Metric, 9 Piece Group with Ball End, Metric, 9 Piece
Sizes: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, Sizes: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm,
5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm 5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm
CAT branded plastic holder included CAT branded plastic holder included
Hand Tools
256-4879 L Shaped Torx Wrench T50
Hex Key Wrenches, Standard and Metric Part No. Size Part No. Size
1U-7559 1.5 mm 1U-7573 5 in
64
1U-7560 2 mm 1U-7574 3 in
32
Extra length hex keys
1U-7561 2.5 mm 1U-7575 1 in
8
Inch and metric sizes
1U-7562 3 mm 1U-7576 5 in
32
1U-7563 4 mm 1U-7577 3 in
16
1U-7564 5 mm 1U-7578 7 in
32
1U-7565 6 mm 1U-7579 1 in
4
1U-7566 8 mm 1U-7580 5 in
16
1U-7567 10 mm 1U-7581 3 in
8
1U-7568 12 mm 1U-7582 7 in
16
1U-7569 14 mm 1U-7583 1 in
2
1U-7570 17 mm 1U-7584 9 in
16
1U-7571 19 mm 1U-7585 5 in
8
4C-4067 22 mm 1U-7632 3 in
4
1U-7572 1 in 1U-7586 1 in
16
ID: D01143T1
Used to remove and install hollow head screws Item Part No. Description Size
1 1P-3566 Bit 9 in
16
9U-7419 Bit 3 in
4
2 6V-0115 Wrench 1 in
8
6V-2104 Wrench 3 in
32
5P-4205 Wrench 5 in
32
5P-4206 Wrench 9 in
64
ID: C33395T1
Part No. Hex Size Usable Depth Part No. Hex Size Usable Depth
1 inch Drive 3 inch Drive (contd)
2 4
ID: 75995-1T1
Used to remove spark plugs and adapters on 5.4 inch Bore Natural Gas
Engines (G342, G353, G379, G398)
Especially useful because plugs and adapters are deeply recessed in top of
engine
1P-5559 Wrench:
Large end: 1.25 in
ID: C38083T1 Small end: .75 in
5P-6588 9 in Hex
16
5P-6589 3 in Hex
4
ID: C09346T1
ID: C79435T1
ID: C80594T1
Exclusive high-tech handle for a more comfortable grip and more powerful performance
Exclusive high-tech handle design for a more comfortable grip and more powerful performance
Includes a flat 14 inch tip and #1 Phillips
ID: C79642T1
Hand Tools
162-7804 Black Plastic Handle Screwdriver Set, 6 Piece
Warranty: Lifetime
Tip Size Part No. Description
Black plastic handles 1
4 6V-7935 Standard
6-piece set 3
16 6V-7937 Standard
Includes vinyl pouch 5
16 6V-7933 Standard
3 6V-7932 Standard
8
ID: C79461T1
Nickel/chrome-plated blades with vapor-blasted tips for best possible grip on screws
Heavy duty, high impact handle
Shape of black plastic handle provides the optimum fit to the human hand
ID: C79428T1
222.25 mm (834 in) long overall; 96.04 mm (32532 in) stainless steel shank Includes #1, #2, and #3 Phillips and
length 6.5 mm x 1.2 mm, 6.0 mm x 1.0 mm,
316 inch and 932 inch flat tips, #1 and #2 Phillips, and #2 Pozidriv store in and 5.5 mm x 0.8 mm flat tips
hollow handle High impact, pocket-sized ABS plastic case
Convenient magnetic bit holder (to fit power
drills or for use with the case as a hand-held
screwdriver) is included
ID: C79424T1
ID: C79643T1
ID: C66962T1
Part No. Description Length Use
194-3552 Hacksaw 350.0 mm (13.78 in) for use with 12 inch blade;
blade tensioning device in
handle
208-6183 Hacksaw 419.1 mm (16.50 in) for use with 12 inch blade
Flat taper at one end and pointed Eye-catching addition to the sales floor area
taper on the other end Sturdy display measures only 406.4 mm x 457.2 mm
(16 in x 18 in) at the base but its 1625.6 mm
(64 in) high for extra visual impact
ID: C58237T1 Holds 1U-7593 (2), 4C-5742 (2), and
Part No. Description Size
4C-5647 (1) Pry Bars
1U-7587 Rolling Head Pry Bar 152.4 mm (6.00 in)
Pry bars purchased separately
194-3553 Rolling Head Pry Bar 304.8 mm (12.00 in)
5F-4764 Rolling Head Pry Bar 406.4 mm (16.00 in)
194-3556 Rolling Head Pry Bar 533.4 mm (21.00 in)
1U-7591 Pry Bar .625 mm x 457.2 mm (.63 in x 18.00 in)
1U-7592 Pry Bar .75 mm x 609.6 mm (.75 in x 24.00 in)
1U-7593 Pry Bar .875 mm x 762 .0 mm (.88 in x 30.00 in)
4F-5166 Pry Bar 762.0 mm (30.00 in)
4C-5742 Long Pry Bar 1168.4 mm (46.00 in)
4C-5647 Long Pry Bar 1371.6 mm (54.00 in)
ID: C54844T1
Handled Pry Bars
Warranty: Manufacturers
239-4255
Black chrome striking caphit bar without damage to handle
Available in bar shank lengths of 30, 46, 61, and 91 cm (12, 18, 24, and 36 in) 239-4143
Ergonomic handle made from a dual durometer composite for user comfort; reduces hand fatigue
Polished tip with black oxide finish
239-4141 12 inch Handled Pry Bar, 30 cm (12 in) 239-4142
Long-life finish resists rust and wear during use
239-4142 18 inch Handled Pry Bar, 46 cm (18 in)
239-4143 24 inch Handled Pry Bar, 61 cm (24 in)
239-4255 36 inch Handled Pry Bar, 91 cm (36 in)
239-4141
239-4140 Handled Pry Bar Kit includes:
239-4141, 239-4142, and 239-4143 239-4140
ID: D00608T1
Hammers Item Part No. Size Height Length Weight
Ball Peen Hammers
1 1S-0257 118 in 298.5 mm 340 g
(11.75 in) (12 oz)
2 1B-7810 1532 in 113.5 mm 406.4 mm 680 g
(4.47 in) (16.00 in) (112 lb)
3 8H-8577 114 in 128.6 mm 406.4 mm 900 g
(5.06 in) (16.00 in) (2 lb)
Soft Face Hammers
.4 1S-0258 11116 in 117.5 mm 330.2 mm 900 g
Hammer Handles
ID: C07907T1
(4.63 in) (13.00 in) (2 lb)
Part No. Size Material
5 Replacement Tips for 1S-0258:
263-3817 305 mm (12 in) Hickory
3S-0460 Medium Tip
263-3819 407 mm (16 in) Hickory 3S-0459 Hard Tip
263-3820 458 mm (18 in) Hickory
Multiple Use Hammers Item Part No. Description Face Diameter Overall Length Weight
1 223-1697 Double Face Sledge 47.75 mm (1.88 in) 889.0 mm (35.00 in) 4.36 kg (9.62 lb)
2 223-1694 Dead Blow Sledge 69.85 mm (2.75 in) 508.0 mm (20.00 in) 2.50 kg (5.50 lb)
3 223-1693 Hand Drilling (Short Handle) 38.10 mm (1.50 in) 273.05 mm (10.75 in) 1.82 kg (4.00 lb)
Not shown
223-1698 Double Face Sledge 53.98 mm (2.13 in) 905.0 mm (35.63 in) 4.95 kg (10.92 lb)
245-9823 Double Face Sledge 73.00 mm (2.88 in) 914.0 mm (36.00 in) 7.25 kg (16.00 lb)
223-1695 Dead Blow Sledge 82.55 mm (3.25 in) 914.40 mm (36.00 in) 5.45 kg (12.00 lb)
Hammer Handles
Part No. Size Material
263-3821 762 mm (30 in) Hickory
263-3822 915 mm (36 in) Hickory
ID: D00222T1
Hand Tools
Slide Sledge Heavy Equipment Repair Tool
One operator can safely and easily maneuver the Slide Sledge Heavy Equipment Repair
Tool into hard-to-reach places, simplifying repairs while reducing operator effort.
Slide Sledge is powered by sliding the steel drive bar back and forth, allowing the operator
to deliver a precise impactwhen and where its needed. This eliminates inaccurate
sledgehammer swings that can damage machinery.
Eliminates need for special equipment or additional operators
Reduces preventive and unscheduled maintenance hours
Used to remove and install pins on almost any equipment
Cuts through stripped or rusted bolts in seconds
Reaches between ripper teeth for easy removal and installation
Drives seals into place, quickly and easily
Adapts to separator forks for fast, easy changeouts
Promotes a safer work environmenteliminates flying debris associated with hammer
and chisel use
Minimizes operator effort and reduces muscle strain through finger-pressure control
Accommodates interchangeable, application-specific tips that allow one tool to do
the job of many
Adapts to quick-change tips engineered to get the job done faster and easier
Delivers powerful, precise impact; use a 5 lb handle weight for additional impact
Made of induction-hardened steel for long life
ID: D01743T1
ID: D01731T1
ID: D01725T1
Accessories
Item Part No. Description Use
1 272-1222 Tie Rod/Ball Joint Separator 3 Tip Set Slide Sledge separator adapter and 1116 in, 1516 in, and 118 forks
2 272-1223 Tie Rod/Ball Joint Splitter Adapter Attach all Slide Sledge separator forks and most common forks available
3 272-1224 Tie Rod/Ball Joint Separator Fork, 1116 in
272-1225 Tie Rod/Ball Joint Separator Fork, 1516 in
272-1226 Tie Rod/Ball Joint Separator Fork, 118 in
272-1227 Tie Rod/Ball Joint Separator Fork, 1716 in
4 272-1228 Pin Driver, 12 in diameter Recommended for pins and bolts greater than 12 inch up to 78 inch diameter
5 272-1230 Pin Driver, 78 in diameter Recommended for pins greater than 78 inch up to 114 inch diameter
6 272-1233 Pin Driver, 114 in diameter Recommended for pins greater than 114 inch up to 2 inch diameter
7 272-1237 Pin Driver, 2 in diameter Recommended for pins greater than 2 inch up to 212 inch diameter
8 272-1239 Pin Driver, 212 in diameter Recommended for pins greater than 212 inch up to 3 inch diameter
9 272-1240 Pin Driver, 3 in diameter Recommended for pins greater than 3 inch up to 4 inch diameter
10 272-1241 Curved Chisel Tip, 138 Ideal for chopping away hardened debris and shearing metal bolts, pins, and rivets up to 38 in, grade 8
11 272-1242 Ripper Tooth Pin Inserter, 34 in diameter Use on pins as small as 34 inch up to 1 inch with minimum tooth spacing of 412 in
272-1244 Ripper Tooth Pin Inserter, 12 in diameter Use on pins as small as 12 inch up to 34 inch with minimum tooth spacing of 312 in
272-1247 Ripper Tooth Pin Inserter, 38 in diameter Use on pins as small as 38 inch up to 12 inch with minimum tooth spacing of 234 in
12 272-1243 Ripper Tooth Pin Remover, 34 in diameter Use on pins as small as 34 inch up to 1 inch with minimum tooth spacing of 412 in
272-1245 Ripper Tooth Pin Remover, 12 in diameter Use on pins as small as 12 inch up to 34 inch with minimum tooth spacing of 312 in
272-1246 Ripper Tooth Pin Remover, 38 in diameter Use on pins as small as 38 inch up to 12 inch with minimum tooth spacing of 234 in
13 272-1249 Race/Bearing/Seal Adapter Adapter driver tip to install races, bearings and seals. Add drive plates to the end of the adapter in various
combinations. Fits plates with a common 916 center hole, up to 34 inch high (plates not included).
14 272-1250 Bushing Driver Adapter Adapter driver tip to properly install bushings easily and quickly. Fits drivers with a common 34 center hole,
up to 78 inch high (drivers not included).
15 272-1251 Scarifier Tooth Tip Removes scarifier teeth on most motor graders. The fork design allows the technician to split the trenching arm
where the scarifier tooth is forced to fit.
16 272-1252 Utility Wedge Tip All-purpose impact tool designed to separate parts and straighten steel with maximum force
17 272-1253 5 Pound Handle Weight Increases the Slide Sledge striking force by 5 lbs; works with any of the four tools by threading onto tool handle
Not shown
272-1248 Bushing/Bearing/Seal Plate Driver Use with Caterpillar plates (not included)
287-2075 Small Tire Bead Breaker, 214 in head width Most standard applications
287-2076 Large Tire Bead Breaker, 278 in head width Ideal for tractor trailers, backhoes, motor graders, and other large equipment
ID: D01737T1
1-48 Shop Supplies and Tools Catalog 2007
01b.qxp 10/5/06 1:24 PM Page 49
Hand Tools
Shovels and Spades
Warranty: Manufacturers
ID: C79833T1
9U-7329 Universal Level
Warranty: Manufacturers
ID: C79644T1
Automatic Power Tapes
5P-3277, 1U-9366, 1U-9367, and 1U-9368
2-color
Handsome, chrome-finished case
Removable belt clip
232-5041
Ergonomically designed
Magnetic tip holds tape in place and makes long distance measuring much easier
Yellow and black plastic
ID: C33497T1
Blade Length Blade Length Graduations Graduations Locking
Part No. Blade Width in Feet in Meters in English in Metric Feature
5P-3277 12.7 mm (12 in) 10 3 1 in, 110 in 1.0 cm, 1.0 mm Yes
1U-9366 19.05 mm (34 in) 16 5 1 in, 116 in 1.0 cm, 1.0 mm Yes
1U-9367 25.4 mm (1 in) 26 8 1 in, 116 in 1.0 cm, 1.0 mm Yes
ID: D00695T1
1U-9368 25.4 mm (1 in) 30 9 1 ft, 1 in, 116 in Yes
232-5041 25.4 mm (1 in) 26 8 1 ft, 1 in, 116 in 1.0 cm, 1.0 mm Yes
Tape Measures
Warranty: Manufacturers
Hand Tools Tapes / Gauges / Magnets / Pipe Wrenches Miscellaneous Hand Tools
ID: C79429T1
Used to quickly and conveniently measure openings for shim packs or Shows millimeters and inches on one side
spacers Only 614 inch long and 12 inch wide
Used in place of thickness gauges Has a convenient pocket clip
Made of quality tool steel
One side graduated in inches, other side in millimeters
Size: 6.20 in x .40 in (160.0 mm x 11.0 mm)
.010 .020 .030 .040 .050 .060 .070 .080 .090 .100 .110 .120 .130 .140 .150 IN. No.270
ID: C79602T1
4 6 8 1 2 4 6 8 2 2 4 6 8 3 2 4 6 8 4MM
ID: C66613T1
Measures or checks for straight line dimensions on any large, steel structure using
magnet restrained string lines
Fast, economical means of simplifying inspection of large steel structures for alignment,
position, parallelism, dimensional accuracy
Strong enough to hold a tight string over a steel structure
Magnets can be stacked to obtain string clearance with structure features
String not included
Dimensions: 25.0 mm x 25.0 mm x 50.0 mm (1.00 in x 1.00 in x 2.00 in)
Weight: 0.166 kg (0.366 lbs)
ID: C68824T1
ID: C41211T1
Item Part No. Description Pipe Capacity Length
1 4C-6974 Aluminum Wrench 14.0 mm - 63.0 mm (.25 in - 2.00 in) 356.0 mm (14.00 in)
2 4C-6975 Aluminum Wrench 14.0 mm - 75.0 mm (.25 in - 2.50 in) 457.0 mm (18.00 in)
3 4C-6976 Aluminum Wrench 14.0 mm - 90.0 mm (1.25 in - 3.00 in) 610.0 mm (24.00 in)
Not shown 4C-6973 Aluminum Wrench 10.0 mm - 48.0 mm (.13 in - 1.50 in) 254.0 mm (10.00 in)
Hand Tools
Heavy-Duty Pipe Wrenches
ID: C41209T1
Wheel for Copper, Wheel for
Item Part No. O.D. Capacity Length Weight Aluminum, Brass, Steel Stainless Steel
1 4C-6977 3.0 mm - 33.0 mm (.13 in - 1.31 in) 152.0 mm (6.00 in) 0.2 kg (.5 lb) 4C-6980 4C-6981
2 4C-6978 6.0 mm - 60.0 mm (.25 in - 2.63 in) 203.0 mm (8.00 in) 0.5 kg (1.25 lb) 4C-6980 4C-6981
3 4C-6979 10.0 mm - 90.0 mm (.38 in - 3.50 in) 279.0 mm (11.00 in) 1.1 kg (2.5 lb) 4C-6982
ID: C05333T1
Item Part No. Tip Size Type
1 1P-1864 (No. 26-90) 0.12 in External
2 1P-1862 (No. 25-90) 0.09 in Internal
3 1P-1858 (No. 23-90) 0.07 in Internal
4 1P-1856 (No. 22-90) 0.04 in External
5 1P-1860 (No. 24-90) 0.07 in External
6 1P-1854 (No. 21-90) 0.04 in Internal
ID: C07899T1
1U-8758 Internal Retaining Ring Pliers 2P-8312 External Retaining Ring Pliers
Used to remove and install the large internal retaining rings in power shift Used to remove and install tempered steel
transmissions retaining rings used in many applications
Overall length: 29.00 in (737.0 mm) Right angle tips to provide the
Double ratchet lock necessary clearance where the
lock ring is accessible only from
Pliers include 0.15 in (3.8 mm) diameter tips
a perpendicular position
Service Part: 1U-8759 Replacement
Tips (2 per package)
ID: C33478T1
ID: B83786T1
226-1900 Pin Punch Set, 7 Piece 227-3129 Drift Punch Set, 5 Piece
Warranty: See individual part number Warranty: See individual part number
Part No. Point Size Length
Replaces discontinued 226-1901 1
16 in 102 mm (4.0 in) Replaces discontinued
1U-7250 Pin Punch Set, 7 Piece 3
1U-7260 Drift Punch Set, 5 Piece
226-1902 32 in 114 mm (4.5 in)
Individually heat treated for 1
Material: high carbon steel
226-1903 8 in 127 mm (5.0 in)
uniform hardness Individually heat treated
226-1904 5 in 140 mm (5.5 in)
32
Includes pouch for uniform hardness
226-1905 3 in 140 mm (5.5 in)
16
Includes pouch
226-1906 7 in 178 mm (7.0 in)
32
ID: D00416T1
Part No. Point Size Length
227-3130 1 in 229 mm (9.0 in)
8
ID: D00417 T1
1-52 Shop Supplies and Tools Catalog 2007
01b.qxp 10/5/06 1:24 PM Page 53
Hand Tools
227-3795 Chisel Group, Service Parts
5 Piece Part No. Punch Size Length
Warranty: See individual part number 227-3796 5
16 inch 114.3 mm (4.50 in)
227-3797 3 inch 127.0 mm (5.00 in)
8
Individually heat-treated for uniform hardness 227-3798 7 inch 139.7 mm (5.50 in)
16
Resharpened and polished after blasting 227-3799 1 inch 146.1 mm (5.75 in)
2
for a sharper cutting edge 5
227-3800 8 inch 152.4 mm (6.00 in)
Includes pouch
ID: D00369T1
for maximum hardness they hold their edges and points 3 1F-1159 3
16 in 152.4 mm (6.00 in) Center Punch
Not shown
8H-8579 5 in 203.2 mm (8 .00in) Punch
32
ID: C33543T1
Item Part No. Description
1 1U-7234 Feeler Gauge, 25 Blade, .0015 in-.040 in
2 8H-8581 Feeler Gauge, 25 Blade, .0015 in-.025 in
Not shown 1B-9660 Valve Clearance Gauge, 6 Blade, .005 in-.010 in
ID: C78585T1
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
.003
.002
.0015
.001
in
ID: C80131T1
Used to quickly and easily check clearance between mating parts (main rod and b in
Part No. Color Clearance Range
USE HPB-1 (BLUE) F
.001
earing clearance, component side clearance, oil pump cover to gear clearance, etc.)
USE HPR-1 (RED)
ID: C79485T1
ID: C79433T1
5P-1720
Used to remove and install all types of oil seals
One end of pick is pointed for prying out flexible seals
Blunt, hook end is used to align seals for installation and to eliminate the twist
that occurs when installing O-ring or quad-ring seals
Both ends of the pick are hardened and provide much greater strength than would 5P-7414
normally be expected from a tool this size
ID: C80219T1
ID: C27161T1
ID: C79918T1
1-54 Shop Supplies and Tools Catalog 2007
01b.qxp 10/5/06 1:24 PM Page 55
Hand Tools
Scratch Brushes
Hand scratch brushes are excellent for removing rust, scale, old paint, chips
and dirt, and for cleaning castings and metal parts
Provide long, effective service at extremely low cost
Quickly removes flaking paint, rust, and scale Excellent for removing rust, scale, old paint, chips, or dirt
Handy small size with pointed end works well in hard to reach areas Unique wrap-around handle protects your fingers
Full size handle with finger grips and thumb rest provides added control and Full size handle and molded finger grips add control and reduce fatigue
comfort Over 80 yards of wire for maximum performance
Made of tough polypropylene Made of tough polypropylene
Overall length: 254.0 mm (10.00 in) Heavy-duty steel scraper has a baked-on, rust resistant finish
Scraper is permanently secured to brush
Scraper width: 76.2 mm (3.00 in)
Overall length: 330.2 mm (13.00 in)
ID: C79258T1
ID: C79255T1
ID: C79259T1
ID: C44013T1
Wire Wire
Item Part No. Description Size Row
ID: D01215T1
1 1U-9920 11 in O.A.L. Size #10 Black Polypropylene Part No. Size (w x l) Material
2 1U-9919 11 in O.A.L. Size #10 Tampico 262-9749 25 mm x 178 mm (1 in x 7 in) nylon brush, metal ferrule, plastic handle
3 1U-9922 11 in O.A.L. Size #10 Unitized 262-9750 51 mm x 203 mm (2 in x 8 in) nylon brush, metal ferrule, plastic handle
4 2B-4317 1034 in O.A.L. Paint Style Black Nylon 262-9752 76 mm x 203 mm (3 in x 8 in) hog bristle brush, metal ferrule, wood handle
112 in
Genuine horsehair bristles, crimped with flat tin handle Stiff wire bristles thoroughly clean posts
Chemical resistant handle
Part No. Description Size
1U-9977 Acid Brush 3 in
8
ID: C79612T1
ID: C33487T1
8F-9866 Lever Grease Gun, Model Pro L Item Part No. Description
Heavy-duty construction
Cast iron head equipped with a check Maximum operating pressure
valve and an air-bleed valve of assembly 31,026 kPa (4,500 PSI)
Spring primed Service Parts for Noncurrent 8F-9866
(This model is not marked Pro L and uses the 2M-2689
Two way loading or 190-1670 Coupler with a check valve.)
Uses standard Cat Grease Part No. Description
cartridges (14.5 oz)
190-1670 Coupler (valve with steel insert)
Lever gun will operate with
2M-2689 Coupler (valve with rubber insert)
partial lever strokes for use inID:close quarters
C80385T1
9F-2689 Nozzle Assembly
Zinc plated
9F-2638 Hose Assembly (part of 9F-2636)
Cat branded
9F-2637 Nipple (part of 9F-2636)
Reference
NEHS0793 Tool Operating Manual
Item Part No. Description
1 190-1668 Coupler
2 190-1669 Hose Assembly, 12 in long
Not shown 190-5623 Hose Assembly, 18 in long (optional)
ID: C80382T1
Hand Tools
241-0706 Grease Gun Group with 2 batteries
194-3560 Grease Gun Group with 1 battery
194-3561 Battery, Rechargeable
Warranty: Manufacturers
ID: C79964T1
Hand Tools Click Type and Dial Type Torque Wrenches Torque Wrenches
Torque Wrenches
Hand Tools
Torque Wrench Extensions
Heavy-Duty Box Wrenches
Used for fasteners in inaccessible places, such as track roller guard bolts, where a torque wrench Straight/
Part No. Hex Size Config. Offset Torque
and standard socket cannot be used
6V-4165 19 mm 12 pt straight 650 ft/lbs
Has an effective length of 610 mm (24 in) and a capacity up to 884 Nm (650 ft-lb)
262-2758 20 mm 12 pt straight 650 ft/lbs
A slide rule type torque computer, Form SEHS7150, is available to determine the torque wrench
dial reading for different extensions 4C-9563 24 mm 12 pt straight 650 ft/lbs
262-2759 30 mm 12 pt straight 650 ft/lbs
Part No. Description 4C-9565 36 mm 12 pt straight 650 ft/lbs
6V-3146 Tubular Extension 9U-7375 46 mm 12 pt offset 1000 ft/lbs
6V-4170 Adapter, 34 inch, 9U-5612 55 mm 12 pt offset 1000 ft/lbs
Sq. Drive 6V-4166 7
8 in 12 pt straight 650 ft/lbs
6V-4167 15 in 12 pt straight 650 ft/lbs
16
6V-4171 15 in 12 pt 15 offset
16
ID: B64023-1T1
The 8S-5131, 1P-2382, 5P-4773, and 9S-6330 Adapters are used with the
9S-7353 or 9U-5014 Torque Wrench
The 8F-4677 Extension and 8F-4678 Adapter are used with the 9S-7352 or 9U-5015 Wrench
to increase the capacity of the wrench
ID: A48088-2T1
Part No. Description Use
9S-6330 Adapter (12 inch Drive, 916 inch 12 Point Box End) for 916 inch head universal joint bolts in earlier 992 Wheel Loaders.
8S-5131 Adapter (12 inch Drive, 78 inch 12 Point Box End) for front left main bearing cap bolt on 1100 and 3100 Series Engines.
1P-2382 Adapter (12 inch Drive, 34 inch 12 Point Box End) for universal joint bolts on all tractor-scrapers (except 613) and No. 16 Motor Graders.
5P-0166 Crowfoot Wrench (38 inch Drive, 34 inch Hex) for torquing fuel line nuts on D3 Tractors, 910 Wheel Loaders and 931 Track Loaders.
8F-4678 Adapter Driver (34 inch Drive) for use with 8F-4677 Extension.
8F-4677 Extension, 34 inch Drive, 2678 inch center to center use to double capacity of 8F-4675 and 9S-7352 Torque Wrenchs for torque applications up to 700 ft.lb.
5P-4773 Adapter (12 inch Drive, 58 inch 12 Point Box End) for 58 inch head universal joint bolts in later 992
Not Shown
9U-5932 Camshaft Torque Extension 3600 Engines
8T-3196 Offset Box Wrench (34 inch Drive, 178 inch Hex, 12 pt)
9U-6282 Crankshaft Main Bearing on 3054 and 3056 Engines.
1 inch Sq. Drive, 15 inch Hex, 12 pt
2 16
Extensions listed below are used with the 6V-9452 Adapter, 6V-9451 Tubular Arm,
and the 9S-7352 Torque Wrench primarily for applications up to 1000 ft-lb (1360 Nm)
The Torque Computer, Form SEHS7150, can be used to compute the correct torque
wrench reading for proper torque application at the fastener
ID: B99650T1
Part No. Description Use
6V-9452 Adapter, 3 inch Drive
4
ID: C07589T1
Hand Tools
1P-7460 Mechanical Torque Tester
ID: C05337T1
NOTE: Use 9U-5101 mounting bracket to mount the testers to a bench top. No bracket is required to mount testers to a vertical surfaces.
Allows controlled output torque in a range of 34 to 300 Nm (25 to 220 ft-lb) Item Part No. Description
Readily adapts to 6V-7820 or 6V-6080 Torque Multipliers which provide controlled 1 8T-5190 Wrench Group1
torque values between 300 to 4350 Nm (220 to 3200 ft-lb) 2 8T-5191 Bar
Output torque of the wrench can be set by adjusting the air supply at the regulator 3 8T-5192 Bar
Regulator air gauge is calibrated in kPa and PSI 4 8T-5193 Regulator
Air pressure of 620 kPa (90 PSI) is required for the maximum torque 5 8T-5194 Block (Spacer)
setting 6 8T-5224 Gauge
12 inch drive and rotation is reversible 7 8T-5225 Hose
Most effective where there are several hardware items that require 8 8T-5226 Nipple (two)
the same torque; for example, when tightening the wheel nuts or front
9 8T-5227 Coupler (two)
strut mounting bolts on off-highway trucks
10 8T-5228 Block (base)
11 6V-6105 Block (lid)
12 0T-0065 Bolt, 64 mm (212 in) long
13 1A-5964 Bolt, 89 mm (314 in) long
14 5M-2894 Washer (two)
Not shown
1U-5809 Grommet
ID: C07365T1 1U-5748 Output spindle
8T-5321 Seal Kit
1 When the 8T-5190 Wrench Set is ordered
separately, the 8T-5192 Bar is assembled on
the wrench. The 8T-5191 Bar is then supplied
as a loose part.
Allows controlled output torque from 286 Nm (200 ft lbs) to 4125 Nm (3000 Wrench group works well in applications requiring different torque
ft lbs) specifications (readjust torque setting by simply adjusting air pressure)
Output torque is set by adjusting air pressure regulator (part of 194-7591 Regulator group includes cage, hose, pressure gauge, and filter assembly
Regulator Group) filter assembly is equipped with air filter, pressure regulator, and automatic
All wrench groups have standard 1 inch square drive oiling system
Requires 689 kPa (100 PSI) air pressure to achieve maximum torque Requires 4C-8856 Fitting and 8T-9568 Oil (not included)
Hand Tools
Low Clearance Hydraulic Wrenches
Warranty: Manufacturers
132-8112, 132-8119, 132-8126, and 132-8133 Part No. 132-8112 132-8119 132-8126 132-8133
Dual pawl mechanism prevents repeated bolt wind up Maximum torque 1884.9 Nm 4447.9 Nm 7580.4 Nm 15621.8 Nm
(1390 ft lbs) (3280 ft lbs) (5590 ft lbs) (11520 ft lbs)
360 x 180 degree swivel gives hose-free like operation
Minimum torque 271.2 Nm 650.9 Nm 1132.3 Nm 2379.9 Nm
Quick release levers for accurate pawl release (200 ft lbs) (480 ft lbs) (835 ft lbs) (1755 ft lbs)
Uni-body housing provides rigid durability Drive size 3 in 1 in 112 in 112 in
4
Anti-lock switch allows instant tool on/off Accuracy 3 3 3 3
Anti-rust finish provides corrosion resistance Reaction Arm Standard Standard Standard Standard
Click on reaction arm allows instant Weight 2.02 kg 4.51 kg 7.60 kg 13.38 kg
on/off reaction arm (4.45 lbs) (9.95 lbs) (16.75 lbs) (29.50 lbs)
Anti-backlash mechanism Seal Kit 1U-6225 132-8125 132-8132 132-8139
ID: D01249T1
ID: SQV.jpg
ID: C80038T1
Hand Tools
Hydraulic Pumps
Warranty: Manufacturers
ID: D01261T1
Pneumatic Tools
Hand Tools
Impact Wrenches, 12 and 34 inch
Warranty: Manufacturers
Recommended air pressure 620 kPa (90 PSIG) 620 kPa (90 PSIG)
Air consumption, free speed 30 SCFM (4.2 CFM) [118.9 I/min.] 41 SCFM (5.8 CFM) [164.2 I/min.]
Free speed, forward 8000 RPM 4500 RPM
Free speed, reverse 8000 RPM 5000 RPM
ID: D00335T1
Sound level, free speed 108 dBa 92 dBa
Torque range 35-408 Nm (25-300 ft-lb) 407-1085 Nm (300-800 ft-lb)
Maximum torque 578 Nm (425 ft-lb) Forward 1626 Nm (1200 ft-lb)
578 Nm (425 ft-lb) Reverse
Air inlet thread size 1 in - 18 NPT 3 in - 18 NPT
4 8
Repair Kits
Impact Wrench Anvil
Part No. Description Part No. Part No.
231-6041 3 inch Motor and Throttle Repair Kit 222-3048
8
ID: D00857T1
Part No. 222-3054 222-3055
Drive size 1 in 1 in
Recommended air pressure 620 kPa (90 PSIG) 620 kPa (90 PSIG)
Air consumption, free speed 26 SCFM (3.6 CFM) 41 SCFM (8.3 CFM) [164.2 I/min.]
Air consumption, working 38 SCFM (5.3 CFM) [150.1 I/min.] 38 SCFM (5.3 CFM) [150.1 I/min.]
Free speed, forward 4000 RPM 4000 RPM
Free speed, reverse 4000 RPM 4000 RPM
ID: D00851T1
Sound level, free speed 92 dBa 92 dBa
Sound level, working 103 dBa 103 dBa
Blows per minute 500 505
Torque range 813-1898 Nm (600-1400 ft-lb) 813-1898 Nm (600-1400 ft-lb)
Maximum torque 3796 Nm (2800 ft-lb) 4067 Nm (3000 ft-lb)
Air inlet thread size 1 in - 14 NPT 1 in - 14 NPT
2 2
Repair Kits
Impact Wrench Anvil
Part No. Description Part No. Part No.
231-6041 3 inch Motor and Throttle Repair Kit 222-3048
8
Hand Tools
Sanders and Polishers
Warranty: Manufacturers
ID: D00365T1
ID: D00341T1
Part No. 222-3063 222-3064 222-3065 222-3067 222-3068 222-3084 222-3069
Description Palm Sander, 6 in 7 in Angle Sander 7 in Vertical Sander In-line Sander 6 in OASander 5 in Compact Sander 7 in Angle Polisher
Recommended air pressure 620kPa (90 PSIG) 620kPa (90 PSIG) 620kPa (90 PSIG) 620kPa (90 PSIG) 410kPa (60 PSIG) 620kPa (90 PSIG) 620kPa (90 PSIG)
Air consumption, free speed 36 SCFM (5 CFM) 34 SCFM (4.8 CFM) 31 SCFM (4.3 CFM) 16 SCFM (2.3 CFM) 11 SCFM (2.1 CFM) 32 SCFM (4.2 CFM) 34 SCFM (4.8 CFM)
[141.6 I/min.] [135.9 I/min.] [121.8 I/min.] [65.13 I/min.] [59.47 I/min.] [118.9 I/min.] [135.9 I/min.]
Air consumption, working 31 SCFM (4.3 CFM)
[121.8 I/min.]
Horsepower 1 0.25 0.3 1
Free speed 10000 RPM 5100 RPM 4500 RPM 1800 osc/min 10000 RPM 1400 RPM 2600 RPM
Sound level, free speed 83 dBa 84 dBa 83 dBa 87 dBa 93 dBa 88 dBa 84 dBa
Spindle thread 5 in - 18 UNC 5 in - 11 UNC 5 in - 11 UNC 5 in - 18 UNC 7 in - 20 UNC 5 in - 11 UNC
16 8 16 16 16 8
Pad/disc size, diameter 152 mm (6 in) 178 mm (7 in) 178 mm (7 in) 234 x 1712 150 mm (6 in) 127 mm (5 in) 178 mm (7 in)
Backing Pad 231-9464 231-9465 231-9465 231-9467 231-9468, 246-7509 231-9469 231-9465
Buffing Pad 231-9471
Air inlet thread size 1 in - 18 NPT 1 in - 18 NPT 1 in - 18 NPT 1 in - 18 NPT 1 in - 18 NPT 1 in - 18 NPT 1 in - 18 NPT
4 4 4 4 4 4 4
Recommended hose
size, ID min. 8 mm (516 in) 8 mm (516 in) 10 mm (38 in) 8 mm (516 in) 8 mm (516 in) 8 mm (516 in) 8 mm (516 in)
Overall length 122 mm (4.8 in) 410 mm (15.75 in) 406 mm (16 in) 260 mm (10.2 in) 118 mm (4.6 in) 410 mm (15.75 in)
Height 102 mm (4 in) 190 mm (7.5 in) 121 mm (4.75 in) 121 mm (4.75 in)
Weight 1.36 kg (3 lbs) 3.09 kg (6.8 lbs) 2.72 kg (6 lbs) 2.2 kg (4.9 lbs)
Compounding/
buffing pad (included) BFS80
Air Grinders
Warranty: Manufacturers
ID: D00317T1
ID: D00311T1
Overall length 165 mm (6.5 in) 140 mm (5.5 in) 293 mm (11.5 in)
Disc size, diameter
Grinding disc set (incl.)
Weight 1.09 kg (2.4 lbs) .64 kg (1.4 lbs) 1.05 kg(2.5 lbs)
Hand Tools
Air Drills
Warranty: Manufacturers
Air consumption, free speed 71 SCFM (10 CFM) [283.2 I/min.] 71 SCFM (10 CFM) [283.2 I/min.]
ID: D00863T1
Air consumption, working 43 SCFM (6 CFM) [169.9 I/min.] 43 SCFM (6 CFM) [169.9 I/min.]
Horsepower 0.3 0.3
Free speed 2200 RPM 900 RPM
Sound level, free speed 92 dBa 97 dBa
Sound level, working 104 dBa 109 dBa
Spindle thread 3 in - 24 UNF 3 in - 24 UNF
8 8
ID: D00305T1
222-3083 Shears
Warranty: Manufacturers Recommended air pressure 620 kPa (90 PSIG)
Average air consumption 4 CFM [113.3 I/min.]
European Union Compliant, CE marked Horesepower 0.6
Sound level, free speed 88.1 dBa
Sound level, working 99.6 dBa
Cutting capacity 1.2 mm (364 in)
Width of cut 5.6 mm (732 in)
Cutting speed 4.572 m (15 ft) per minute
Strokes 2500 per minute
Air inlet thread size 1 in - 18 NPT
4
Hand Tools
Air Hose
Warranty: Manufacturers
ID: D00581T1
Ergonomic, rugged, die cast aluminum pistol grip designed for heavy-duty use
High vacuum syphon delivers up to 60.6 l (16 gal) per hour
304.8 mm (12 in) extension for accessing difficult, hard-to-reach areas
Adjustable trigger and nozzle tip control volume and spray pattern
1 inch NPT inlet
4
Meets OSHA standards
ID: D01195T1
Patented protective air cone protects operator from chip fly-back Part No. Description
Delivers high thrust with pinpoint accuracy 156-0927 Jet Guard Safety Air Gun
Knurled adjusting nut controls air volume
Ergonomic pistol grip and trigger reduce hand fatigue
Good for cleaning machine tools and other production equipment
Built in hanger for easy storage
Durable cast aluminum body
1 inch NPT inlet
4
Meets OSHA standards
ID: D01183T1
Supplies non-aspirating, high velocity, sharply defined, collimated air stream particularly
suited for cleaning small blind holes and cavities
Complies with OSHA standards for dead-ended nozzle pressure and noise limitation
Uses 90 to 100 PSI line pressure without reduction
Minimizes compressed air usage Test Lab
Part No. Description Listing
4C-3302 Air Blow Gun w/Nozzle Assembly UL/FM
4C-3304 Nozzle w/152 mm (6 in) Extension
ID: C41555T1
Gun Vac
Warranty: Manufacturers
0.94 l (1 qt) canister attaches to spray gun eliminating feed tubes and Ergonomic, rugged, die cast aluminum construction pistol grip designed for
buckets heavy-duty use
Increased mobility reduces the risks of spills High vacuum syphon delivers up to 49.2 l (13 gal) per hour
304.8 mm (12 in) extension for accessing hard-to-reach areas
Adjustable trigger and nozzle tip control volume and spray pattern
0.95 l (1 qt) steel, reusable dispenser eliminates feed tubes and buckets
Good for lubricating trucks, automobiles, construction equipment, and
machinery
14 inch NPT inlet
Meets OSHA standards
ID: D01135T1
Hand Tools
Electrical Tools
density magnets for high torque, high efficiency, and long run times
5
Replacement chargers for cordless drills and impact wrenches (233-9733, 233-9734, 233-9735, 233-9736, Part No. Description Voltage
and 233-9737 Drill Kits and 233-9689, 233-9690, 233-9712, 233-9731, and 233-9732 Impact Wrench Kits) 233-9738 Battery Charger (U.S.A.) 120V, 60 Hz
Used with 233-9746 Battery 233-9740 Battery Charger (Japan) 100V, 60 Hz
Battery voltage 19.2 VDC
Cordless impact wrench and drill battery chargers deliver 233-9741 Battery Charger (Australia) 220 to 240V, 50/60 Hz
Battery type Nickel-cadmium
a more complete charge that contributes to longer battery
Charging time 60 minutes 233-9743 Battery Charger (UK) 220 to 240V, 50/60 Hz
pack life
Weight 1.5 kg (3.3 lbs) 233-9745 Battery Charger (Europe) 220 to 240V, 50/60 Hz
Built-in microprocessor monitors battery pack status every
10 seconds to ensure a fully charged battery Charger output 2.4 Amps
Automatically stops charging when battery is fully charged
(provides maximum battery life)
Saw Blades designed for use on most saws BIM and HCS Saw Blades (not shown)
Part No. Length Teeth Qty/pkg Teeth Specs
1U-9234 305 mm (12 in) 457 mm (18 in) 5 Raker BIM1
4C-9942 4C-9943
1U-9236 305 mm (12 in) 610 mm (24 in) 10 Wavy BIM
1U-9238 305 mm (12 in) 813 mm (32 in) 5 Wavy BIM
1U-9240 305 mm (12 in) 457 mm (18 in) 5 Raker HCS2
4C-9944 1U-9242 305 mm (12 in) 610 mm (24 in) 5 Wavy HCS
1U-9244 305 mm (12 in) 813 mm (32 in) 5 Wavy HCS
1 BIM All purpose blade, highly flexible, for the most difficult materials.
4C-9945 2 HCS High carbon steel blade, for non-hard materials.
ID: C68871T1
Bi-Metal All-Purpose Tiger Saw Blades
Part No. Length Teeth/inch Qty/pkg Recommended Use
4C-9942 152 mm (6 in), flexible 18 5 Heavy gauge (non-ferrous metals) bar and angle stock-stainless-galvanized pipe-tubing (over 18 ga.)
4C-9943 152 mm (6 in), flexible 14 5 Heavy gauge (non-ferrous metals) bar and angle stock-cast aluminum-copper-brass-galvanized
pipe-tubing (over 18 ga.)
4C-9944 229 mm (9 in) 5 5 General roughing-in wood
7
Hand Tools
Casting Salvage
Unique threaded insert design repairs damaged threaded holes in cast and ductile iron, steel, and aluminum
Spiralhook threads engage tapped hole and draw surrounding metal into threads, as bolt or stud is torqued, resulting in a stronger repair
Thread Repair Solid Plug inserts allow off-center and custom-size thread repairs
Viable alternative to welding cast and ductile iron, steel, and aluminum
In many cases parts can be repaired without disassembly
Six kits with individual written installation instructions for a wide range of repair solutions
263-7140 263-7145
1-8 Thread Insert Kit for ductile iron in Off-Highway M20 Thread Insert Kit for repair of 3116 block
Truck and Wheel Loader wheels; can also be used head bolt holes
on steel fabricated and cast wheels
Part No. Description Quantity
Part No. Description Quantity 263-7180 Drill Bit, 5764 inch 1
263-7160 Drill Bit, 1964 inch 1 263-7181 Rough Tap 1
263-7161 Rough Tap 1 263-7182 Finish Tap 1
263-7162 Finish Tap 1 263-7183 Installation Tool 1
263-7170 Installation Tool 1 263-7174 Thread Insert, M20 5
263-7173 Thread Insert, 1-8 5
D00436T1
263-7146
Thread Repair Solid Plug Insert Kit for drilling and
tapping off-center and custom-size threaded
holes1; used for repairing 797 differential retaining
bolt holes in thrust washer halves
Part No. Description Quantity
263-7260 Drill Bit, 2132 inch 1
263-7177 Spotfacer 1
263-7255 Rough Tap 1
263-7256 Finish Tap 1
263-7258 Tapping Fluid 1
263-7259 Thread Sealant 1
263-7175 Solid Plug Insert 5
ID: D00448T1 1 Maximum I.D. thread size of original threaded hole
is 12 inch
Unique threaded stitching pins and locks repair cracks in cast and ductile iron, steel,
or aluminum castings
L-Series Stitching Pins use an interference fit to seal pressure tight and can be installed
at steep angles
C-Series Stitching Pins feature SpiralhookTM threads to produce drawing pressure that pulls sides
of the crack together for strength
Locks installed across a crack; drill jigs create precise hole patterns across cracks in castings;
locks driven into hole patterns creating additional strength
Cold process viable alternative to welding
In many cases parts can be repaired without disassembly
Extensive kit features specialized tools, complete instructions including
six DVDs covering all aspects of crack repair, and storage case
Provides a wide range of repair solutions
D00442T1
Tools
Part No. Description Quantity
263-7184 Magcheck Kit 1
263-7190 Pneumatic Tapping Tool 1
263-7253 Large Collet for 263-7190 1
263-7254 Quick Change Tap Adapter 1
263-7249 Trim-Kut 3 inch Discs (includes 14 inch mandrel) 10
D00781T1
Part No. Description Quantity C Series Stitching Pins, 9.5 mm (.375 in) Thread Diameter
L Series Stitching Pins, 6.3 mm (.248 in) Thread Diameter 263-7219 Stitch Pin, 15.9 mm (.625 in) length 25
263-7193 Stitch Pin, 6.3 mm (.250 in) length 100 263-7220 Stitch Pin, 22.2 mm (.875 in) length 25
263-7194 Stitch Pin, 9.5 mm (.375 in) length 100 263-7221 Stitch Pin, 34.9 mm (1.375 in) length 25
263-7195 Stitch Pin, 15.9 mm (.625 in) length 100 263-7222 Stitch Pin, 50.8 mm (2.00 in) length 25
263-7196 Stitch Pin, 25.4 mm (1.00 in) length 100 263-7226 Drill Bit, letter size O 2
263-7197 Drill Bit, wire size 7 2 263-7223 Rough Tap 1
263-7198 Starting Tap 1 263-7224 Bottom Tap 1
263-7199 Bottom Tap 1 263-7225 Bottom Tap 1
263-7200 Piloted Tap 1 263-7251 Drilling Jig 1
263-7201 Drilling Jig 1 263-7228 Drill Stop 1
L Series Stitching Pins, 8.3 mm (.326 in) Thread Diameter 263-7227 Spotfacer 1
263-7202 Stitch Pin, 6.3 mm (.250 in) length 100 Lock, 20 mm (.793 in) Long
263-7203 Stitch Pin, 12.7 mm (.500 in) length 100 263-7230 Lock, 3.2 mm (.125 in) thick 10
263-7204 Stitch Pin, 25.4 mm (1.00 in) length 100 263-7232 Drill Bit, wire size 15 3
263-7208 Drill Bit, letter size L 2 263-7233 Drill Stop 1
263-7205 Starting Tap 1 263-7234 Drilling Jig 1
263-7206 Bottom Tap 1 Lock, 36 mm (1.409 in) Long
263-7207 Piloted Tap 1 263-7235 Bottom Lock, 2 mm (.080 in) thick 10
263-7250 Drilling Jig 1 263-7236 Surface Lock, 4 mm (.160 in) thick 10
C Series Stitching Pins, 6.0 mm (.233 in) Thread Diameter 263-7238 Drill Bit Set, 18 and 316 inch 3 each
263-7209 Stitch Pin, 6.3 mm (.250 in) length 100 263-7240 Drill Stop, 18 inch 1
263-7210 Stitch Pin, 9.5 mm (.375 in) length 100 263-7241 Drill Stop, 316 inch 1
263-7211 Stitch Pin, 12.7 mm (.500 in) length 100 263-7239 Drilling Jig 1
263-7212 Stitch Pin, 19 mm (.750 in) length 100 Lock, 48 mm (1.877 in) Long
263-7213 Stitch Pin, 28.6mm (1.125 in) length 100 263-7242 Bottom Lock, 5 mm (.190 in) thick 10
263-7197 Drill Bit, wire size 7 2 263-7243 Surface Lock, 9.5 mm (.375 in) thick 5
263-7201 Drilling Jig 1 263-7244 Drill Bit Set, 18 and 14 inch 3 each
263-7215 Finishing Tap, fine 1 263-7240 Drill Stop, 18 inch 1
263-7216 Bottom Tap, fine 1 263-7246 Drill Stop, 14 inch 1
263-7217 Spotfacer 1 263-7245 Drilling Jig 1
263-7218 Drill Stop 1
Hand Tools
Tool Boxes
40 inch and 30 inch top chests have a top compartmentgas spring in 40 inch top chest and slide lock
on 30 inch top chest allow top compartment to open easily
Double-wall steel construction provides strength and durability to support loaded drawers so they stay level
Full length stiffener under the cover is welded to sides of the cover to provide the strongest top cover
available and to minimize racking
Extra deep drawer pulls give more finger room (almost 1 inch) to comfortably pull the drawer
Rolled edges on drawers add strength, rigidity, and safety
Ball-bearing slides provide extra weight support with smooth, one-hand operation
Ergonomic handle design provides comfortable gripping and ease of maneuvering
Gussets on corners improve cabinet strength so the cabinet stays square
Drawer liners included
Caster plates and weldnuts keep casters tight for smooth rollingcaster screws pass
through double thick steel plates and pre-threaded weldnuts
Hand Tools
214-6145 Top Chest, 30 inch
Overall 4 74.93 cm 50.29 cm 49.28 cm 114603.2 cm 56.75 kg
(29.5 in) (19.8 in) (19.4 in) (6988 in) (125 lb)
Drawer, 5.08 cm (2 inch) full width 2 61.47 cm 44.45 cm 4.06 cm 22222 cm
(24.2 in) (17.5 in) (1.6 in) (1355 in)
Drawer, 10.16 cm (4 inch) full width 2 61.47 cm 44.45 cm 9.14 cm 50003.6 cm
(24.2 in) (17.5 in) (3.6 in) (3049 in)
Top Compartment 74.68 cm 47.50 cm 11.94 cm) 42377.6 cm
(29.4 in) (18.7 in) (4.7 in (2584 in)
214-6147 Roller Cabinet, 40 inch
Overall 7 101.6 cm 50.29 cm 102.62 cm 270878.8 cm 127.12 kg 508.48 kg
(40 in) (19.8 in) (40.4 in) (16517 in) (280 lb) (1120 lb)
Drawer, 5.08 cm (2 inch) full width 2 88.14 cm 44.45 cm 4.06 cm 31865.2 cm
(34.7 in) (17.5 in) (1.6 in) (1943 in)
Drawer, 10.16 cm (4 inch) full width 3 88.14 cm 44.45 cm 9.14 cm 107551.2 cm
(34.7 in) (17.5 in) (3.6 in) (6558 in)
Drawer, 15.24 cm (6 inch) full width 1 88.14 cm 44.45 cm 14.22 cm 55776.4 cm
(34.7 in) (17.5 in) (5.6 in) (3401 in)
Drawer, 20.32 cm (8 inch) full width 1 88.14 cm 44.45 cm 19.30 cm 75686 cm
(34.7 in) (17.5 in) (7.6 in) (4615 in)
214-6148 Top Chest, 40 inch
Overall 4 101.6 cm 50.29 cm 49.28 cm 161080.8 cm 83.54 kg
(40 in) (19.8 in) (19.4 in) (9822 in) (184 lb)
Drawer, 5.08 cm (2 inch) full width 2 88.14 cm 44.45 cm 4.06 cm 31865.2 cm
(34.7 in) (17.5 in) (1.6 in) (1943 in)
Drawer, 10.16 cm (4 inch) full width 2 88.14 cm 44.45 cm 9.14 cm 71700.8 cm
(34.7 in) (17.5 in) (3.6 in) (4372 in)
Top Compart. 101.35 cm 47.50 cm 11.94 cm 57514.8 cm
(39.9 in) (18.7 in) (4.7 in) (3507 in)
214-7345 Six Drawer Side Cabinet
Overall 6 41.91 cm 50.04 cm 86.36 87428.4 cm 51.76 kg
(16.5 in) (19.7 in) (34 in) (5331 in) (114 lb)
Drawer, 5.08 cm (2 inch) 1 28.45 cm 44.45 cm 3.81 cm 4821.6 cm
(11.2 in) (17.5 in) (1.5 in) (294 in)
Drawer, 10.16 cm (4 inch) 4 28.45 cm 44.45 cm 8.89 cm 45001.6 cm
(11.2 in) (17.5 in) (3.5 in) (2744 in)
Drawer, 30.48 cm (12 inch) 1 28.45 cm 44.45 cm 29.72 cm 37605.2 cm
(11.2 in) (17.5 in) (11.7 in) (2293 in)
214-7344 Bulk Side Cabinet
2 shelves 41.91 cm 50.04 cm 86.36 cm 181252.8 cm 34.05 kg
(16.5) (19.7 in) (34 in) (11052 in) (75 lb)
ID: C58301T1
9S-1750 Chest
Tough construction rigid three-piece cap end, eight added stiffeners to ensure strength, gasketed cover
and watershed hinge, internally riveted to protect rivets from rust, and a three point locking system
Slides are 17% wider than average tool chests for added strength and durability
Slides are formed from one piece of steel to eliminate fasteners, and no special tool is needed to move slides
Superior black electrostatic finish on 174-9802; orange finish on 188-2095
Drop-front cover lifts to 180 degrees (helps eliminate pinched fingers when closing)
Top drawer size is more compatible with standard size hand tools and includes drawer liners and dividers
174-9803 Lock
ID: D00119T1
1-82 Shop Supplies and Tools Catalog 2007
01c.qxp 10/5/06 1:25 PM Page 83
Hand Tools
248-2283 Tool Bag with Carrying Strap 9U-6219 Tool Box
Warranty: One Year
Nine pockets and ten tool-holding loops on the outside Black, steel construction
Twelve pockets on the inside for holding additional tools Dimensions: 508 mm (20 in) long by 219.08 mm (8.63 in) wide
Material: cloth by 219.08 mm (8.63 in) high
Length: 0.61 m (24 in) Tote tray included
ID: C79420T1
ID: D00678T1
Dimensions: 647.7 mm (25.5 in) long by 152.4 mm (6 in) wide Protects drawers, tools, and deadens sound
by 139.7 mm (5.5 in) high 1.6 mm (116 in) thick oil resistant black foam
Fold-down handle
Material: steel
Part No. Description
4C-3015 7 sheets, 72.4 cm W x 45.7 cm D (2712 in x 18 in)
4C-3016 8 sheets, 91.8 cm W x 58.4 cm D (3618 in x 23 in)
ID: C27098T1
ID: D00301T1
ID: D00319T1
236-5137 202-8643 ID: D00307T1
Three levels of storage Plastic, water-tight container (will not rust or scratch like metal boxes)
Tub is sized to hold most drills and many small power tools Dimensions (width x height x depth):
Tote tray allows for easy access to hand tools like hammers and 514.4 x 212.7 x 225.4 mm (20.25 x 8.37 x 8.87 in)
screwdrivers Color: gray
Compartments in top tray for Tool box capacity:
organizing small parts and 9 kg (20 lbs)
supplies Tool box decal:
Tote and top tray have NEEG2916
molded handles to carry
separately
V-groove in lid holds pipes
and dowels for sawing
Dimensions:
406 x 229 x 318 mm
(16.3 x 9.0 x 12.5 in)
Weight: 2 kg (4.4 lbs)
ID: C80378T1
ID: D00313T1
Hand Tools
178-2212 Case
178-2213 Dividers
Uses include organizing fastener groups and other small reusable items such as nuts, bolts, washers
Convenient to transport to a field site due to compact size
Overall case dimensions: 457 x 305 x 76 mm (18.0 x 12.0 x 3.0 in)
Dividers can partition case to a maximum of 48 bins
Dividers in packages of 12 each
ID: C80066T1
Impact-resistant
B
Textured surface to prevent scratches
D
C
E
ID: C80491T1
Part No. Length A Exterior Length B Exterior Overall Length C Lid Depth D Base Depth E Handle No. Of Color
& Interior & Interior Exterior & Interior Exterior & Interior Exterior & Interior Latches
4C-4730 660mm (26.00 in), 421mm (16.56 in), 114 mm (4.50 in), 23 mm (0.90 in), 84 mm (3.31 in), Yes Two Gray
622 mm (24.50 in) 330 mm (13.00 in) 102 mm (4.00 in) 20 mm (0.78 in) 79 mm (3.12 in)
6V-9449 470 mm (18.50 in), 395 mm (15.56 in), 203 mm (8.00 in), 102 mm (4.00 in), 101 mm (3.96 in), Yes Two Black
432 mm (17.00 in) 330 mm (13.00 in) 187 mm (7.38 in) 89 mm (3.50 in) 82.5 mm (3.25 in)
6V-7145 470 mm (18.50 in), 395 mm (15.56 in), 127 mm (5.00 in), 43 mm (1.70 in), 84 mm (3.31 in), Yes Two Black
432 mm (17.00 in) 330 mm (13.00 in) 114 mm (4.50 in) 35 mm (1.38 in) 79 mm (3.12 in)
8T-0841 394 mm (15.50 in), 311 mm (12.25 in), 191 mm (7.50 in), 95 mm (3.75 in), 95 mm (3.75 in), Yes Two Black
356 mm (14.00 in) 273 mm (10.75 in) 175 mm (6.88 in) 83 mm (3.27 in) 92 mm (3.63 in)
4C-3975 394 mm (15.50 in), 311 mm (12.25 in), 140 mm (5.50 in), 44 mm (1.75 in), 95 mm (3.75 in), Yes Two Black
356 mm (14.00 in) 273 mm (10.75 in) 127 mm (5.00 in) 35 mm (1.38 in) 92 mm (3.63 in)
6V-3072 394 mm (15.50 in), 311 mm (12.25 in), 102 mm (4.00 in), 25 mm (1.00 in), 76 mm (3.00 in), Yes Two Black
356 mm (14.00 in) 273 mm (10.75 in) 89 mm (3.50 in) 16 mm (0.63 in) 73 mm (2.63 in)
6V-3073 311 mm (12.25 in), 224 mm (8.81 in), 99 mm (3.88 in), 30 mm (1.19 in), 68 mm (2.69 in), Yes Two Black
289 mm (11.38 in) 178 mm (7.00 in) 90 mm (3.56 in) 24 mm (0.94 in) 65 mm (2.56 in)
148-5675 216 mm (8.50 in), 198 mm (7.81 in), 90 mm (3.56 in), 20 mm (0.78 in), 70 mm (2.75 in), No One Black
192 mm (7.56 in) 149 mm (5.88 in) 83 mm (3.25 in) 17 mm (0.67 in) 66 mm (2.60 in)
6V-6045 191 mm (7.50 in), 102 mm (4.00 in), 41 mm (1.63 in), 10 mm(0.38 in), 31 mm (1.25 in), No One Black
173 mm (6.81 in) 81 mm (3.19 in) 33 mm (1.31 in) 3 mm (0.13 in) 30 mm (1.19 in)
6V-3112 254 mm (10.00 in), 191 mm (7.50 in), 30mm (1.18 in), No None Black
238 mm (9.38 in) 170 mm (6.69 in) 24 mm (0.94 in)
Heavy-duty plastic boxes for organizing, storing, and protecting small parts
Yellow polypropylene materialresistant to oils, solvents and common chemicals
Rustproof, dentproof, spark proof, and non-conductive
Number of
Part No. Length Width Thickness Color Compartments Size
4C-3722 332.74 mm 228.60 mm 58.42 mm Yellow 12 50.80 x 104.14 mm
(13.10 in) (9.00 in) (2.30 in) (2.00 x 4.10 in)
4C-3723 332.74 mm 228.60 mm 58.42 mm Yellow 6 50.80 x 101.60 mm
(13.10 in) (9.00 in) (2.30 in) (2.00 x 4.10 in)
12 50.80 x 50.80 mm
(2.00 x 2.00 in)
4C-3724 332.74 mm 228.60 mm 58.42 mm Yellow 24 50.80 x 50.80 mm
(13.10 in) (9.00 in) (2.30 in) (2.00 x 2.00 in) ID: C41276T1
4C-3725 332.74 mm 228.60 mm 58.42 mm Yellow 3 104.14 x 104.14 mm
(13.10 in) (9.00 in) (2.30 in) (4.10 x 4.10 in)
6 50.80 x 104.14 mm
(2.00 x 4.10 in)
4C-4463 332.74 mm 228.60 mm 58.42 mm Yellow 4 50.80 x 104.14 mm
(13.10 in) (9.00 in) (2.30 in) (2.00 x 4.10 in)
1 104.14 x 104.14 mm
(4.10 x 4.10 in)
1 104.14 x 317.50 mm
(4.10 x 12.50 in)
4C-4783 381 mm 298.5 mm 63.50 mm Gray/See-through 9-24 15 Removable
(15.00 in) (11.75 in) (2.50 in) Smoke Gray Dividers
4C-4787 177.80 mm 95.3 mm 31.75 mm Opaque 8 35.05 x 41.15 mm
(7.00 in) (3.75 in) (1.25 in) (1.38 x 1.62 in)
1 28.45 x 82.55 mm
(1.12 x 3.25 in)
4C-4789 209.55 mm 114.3 mm 35.05 mm Opaque 12 31.75 x 50.80 mm
(8.25 in) (4.50 in) (1.38 in) (1.25 x 2.00 in)
6V-3007 332.74 mm 220 mm 58.42 mm Opaque 13 50.80 x 50.80 mm
(13.10 in) (8.66 in) (2.30 in) (2.00 x 2.00 in)
1 50.80 x 158.75 mm
(2.00 x 6.25 in)
1 50.80 x 212.85 mm
(2.00 x 8.38 in)
1 104.65 x 104.65 mm
(4.12 x 4.12 in)
152-7997 470 mm 332 mm 77 mm Yellow 21
(18.5 in) (13.07 in) (3.03 in)
4C-3722 4C-3725
4C-3723 4C-3724
4C-4463 6V-3007
4C-4783 4C-4787
Sample Configurations
ID: C80500T1
Hand Tools
Protector CasesPelican Line
Warranty: Manufacturers
Make an excellent lockable storage vault when equipment is not in usejust apply a lock
Strong, double-throw latcheseasier to open with a light pull
Watertight, airtight, dustproof Pelican cases feature an exclusive 6.5 mm (14 in) neoprene O ring, to guarantee a perfect seal.
Neither dust nor water can penetrate this barrier to harm your equipment. These cases are so airtight and watertight they float
even when loaded. The O ring is easily replaced if damaged.
Purge valve The exclusive built-in O ring purge valve is sealed for pressure allowing for quick equalization after changes
in altitude or temperature.
Dentproof The tough, cushioned, protective shell eliminates damage from bumping, jarring, and even airline shipments
Protect contents inside Multiple layers of industrial grade photographic foam secure and cushion equipment
Custom fit for tooling The Pick-NPluck center foam section is prescored for quick and clean custom fitting.
The case lid is lined with the same convoluted foam for maximum shock protection
Lightweight easy to carry by using the comfortable, molded handle (4C-9650 and 4C-9658 have fold-down handles.)
All cases are gray
ID: D01177T1
Slings
Reference N
AI
NEHS0823 Tool Operating Manual CH E IN ING
43 USID: T
A92061T1
E LIF
205-5688 Warning Tag R AD FOR AD
Used to warn technician against using load positioner for overhead lifting G T HE
NO ER
OV
Attach tag to all 9S-9100 and 9S-9101 Sling Assemblies (load positioners)
currently in use; required because the chain is grade 43
Can be ordered free-of-charge
ID: C80390T1
Link Brackets
SMCS Code: 7063-017, 7063-010, 0632
Model: 5000 Series Mining Excavators and General Usage
Slings Slings
Hand Tools
Fabric Slings, Protective Sleeve, and Shackles
SMCS Code: 7500-010, 0632 7258-010, 7960 143-8695
Model: 769, 773, 777, 785, 789, and 793 Off-Highway Trucks and General Usage
Warranty: Fabric Slings: M; Shackle, Spool, and Plate: G
Fiber Optic
Tell Tail Cord
140-7742
ID: C78495T1
Shop Supplies and Tools Catalog 2007 1-89
01c.qxp 10/5/06 1:25 PM Page 90
WARNING
Used to properly lift and handle Caterpillar beadless carcass
Inspect sling for damage before each use and remove from service if or conventional tires
damaged. Do not overload, cut, or expose to temperatures above 82C (180F). Single-ply, webbed nylon sling with many general purpose usages
Use of damaged sling may result in personal injury.
Rated
Sling Eye No. of Capacity
Part No. Length Width Length Body Plys Choker Vertical Basket
Endless Slings (Type V)
1U-8221 3 ft 1 in 1 2,480 lb 3,100 lb 6,200 lb
1U-8222 4 ft 1 in 1 2,480 lb 3,100 lb 6,200 lb
ID: A10264T1
1U-8223 6 ft 1 in 1 2,480 lb 3,100 lb 6,200 lb
1U-8224 8 ft 1 in 1 2,480 lb 3,100 lb 6,200 lb
1U-8225 6 ft 2 in 1 4,960 lb 6,200 lb 12,400 lb Lifting Capacity
1U-8226 8 ft 2 in 1 4,960 lb 6,200 lb 12,400 lb Choker hitch 2300 kg (5,200 lbs.)
1U-8227 10 ft 2 in 1 4,960 lb 6,200 lb 12,400 lb Basket hitch 4500 kg (10,000 lbs.)
1U-8228 6 ft 3 in 1 7,440 lb 9,300 lb 18,600 lb
1U-8229 8 ft 3 in 1 7,440 lb 9,300 lb 18,600 lb
1U-8230 10 ft 3 in 1 7,440 lb 9,300 lb 18,600 lb
1U-8231 8 ft 4 in 1 9,920 lb 12,400 lb 24,800 lb
1U-8232 10 ft 4 in 1 9,920 lb 12,400 lb 24,800 lb
1U-8233 12 ft 4 in 1 9,920 lb 12,400 lb 24,800 lb
Eye and Eye Slings (Type III)
1U-8234 3 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8235 4 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8236 6 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8237 8 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8238 10 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8239 12 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8240 4 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8241 6 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8242 8 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8243 10 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8244 12 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8245 14 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8256 6 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb
1U-8257 8 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb
1U-8258 10 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb
1U-8259 12 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb
Eye and Eye Slings (Tapered Eyes) (Type III)1
1U-8246 8 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb
1U-8247 10 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb
1U-8248 12 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb
1U-8249 14 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb
1U-8250 16 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb
1U-8251 10 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb
1U-8252 12 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb
1U-8253 14 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb
1U-8254 16 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb
1U-8255 18 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb
1U-8260 10 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb
1U-8261 12 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb
1U-8262 14 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb
1U-8263 16 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb
1 Onwider slings, tapered eyes provide a configuration designed for easier use
with chain hooks.
Shop Supplies
Abrasive
Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
Metal Cutting
Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28
Taps and Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31
Thread Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37
Cutting Torch Equipment . . . . . . . . . . . . . . . . . . . . . . . . 2-48
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48
Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-56
Lighting/Electrical Products
Flashlights and Batteries . . . . . . . . . . . . . . . . . . . . . . . . 2-67
Work Lights and Extension Cords . . . . . . . . . . . . . . . . . 2-70
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-76
Personal/Safety
First Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-78
Personal Protection Items . . . . . . . . . . . . . . . . . . . . . . . . 2-80
Hand Protection Gloves . . . . . . . . . . . . . . . . . . . . . . . 2-92
Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-97
Chemical Spill Protection . . . . . . . . . . . . . . . . . . . . . . . . 2-98
Towels and Wiper Products . . . . . . . . . . . . . . . . . . . . . . 2-104
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-108
Abrasive Brushes
Brushes
Shop Supplies
For Abrasive Belt Grinding and Polishing:
Never run an abrasive belt on unfamiliar machinery. Store bulk rolls flat on shelves or pallets not on edge.
Inspect for safe operating conditions: the abrasive belt, idler assembly Belts removed from packing case should be rolled up and stood on edge on a
and contact wheel should be enclosed within sheet metal hood; adjustable clean shelf. They may be draped over a large cylinder but NEVER hang a belt
deflector should be installed within 14 inch of abrasive belt working surface; from a nail or peg (the backing will crease and the abrasive may crack).
use adequate exhaust system; employ special precautions with inflammable Precondition coated abrasive product in a chamber of controlled temperature
or other hazardous materials. and humidity before use for maximum efficiency.
Brushes Abrasive
Brushes Terminology
Outside Diameter Brushes with low density offer greater brush flexibility. The relatively high degree
A larger brush diameter results in a more efficient finishing tool. Production of freedom of the brush wires makes for quick and efficient removal of rust, scale
economies are obtained through lower end-of-service costs. Wire brushes and other incrustations from surfaces by the impact resulting from the whip-like
304.8 mm (12 in) O.D. are a practical size whereas 304.8 to 406.4 mm (12 in to impingement of the wires on the surface.
16 in) O.D. is usually best for non-metallic types. Sizes for portable tools Flexibility
(6,000 RPM maximum) should not exceed 152.4 mm (6 in) O.D. in any material. That quality of a brush which determines resiliency and ability to reach into
Inside Diameter confined areas and conform to uneven or contoured surfaces.
Diameter of brush back. Increasing the inside diameter of a brush while Brushing Speed and Pressure
maintaining the outside diameter results in a stiffer, less flexible brush face. RPM speed specified for Osborn power brushes are Maximum Safe Free Speeds.
Trim Length In most operations, a lower speed than that specified will prove more efficient for
Length of fill material extending beyond brush back or face plates. A short trim you. Lower speeds and lighter pressures give longer brush life, generate less heat
makes a stiff fast cutting brush, while a long trim gives a brush the flexibility to in the work, and require less power. It is important to remember that the TIPS of
contact irregular surfaces. the wire filaments do the actual work. Where high brush pressures and speeds are
required, it is recommended that a more aggressive brush be used. This may be
Fill Density done by increasing wire size, decreasing trim length or in some instances changing
Brushes with high density are used to produce finer surface finishes, and also to another brush type.
Shop Supplies
where fast cutting action is required; for example, burr removing operations.
Designed for heavy duty cleaning, scale, spatter and rust removal
High quality oil tempered wire gives long life on pipe and plate weld cleaning
Abrasive Brushes
General purpose wire brushes that provide fine to medium brushing action
Excellent for brushing uneven surfaces or areas not easily reached by wider brushes
Will remove light scale, dirt, rust, corrosion or light burrs
Max. Safe
Pkg. Wheel Arbor Wire Free Speed
Part No. Qty. Dia. Hole Size Face Width RPM
1U-9971 1 152.4 mm (6 in) 12.7-15.9 mm (12 -58 in) .36 mm (.014 in) 15.88 mm (58 in) 6,000
1U-9972 1 152.4 mm (6 in) 12.7-15.9 mm (12 -58 in) .36 mm (.014 in) 25.4 mm (1 in) 6,000
1U-9973 1 177.8 mm (7 in) 15.9 mm (58 in) .36 mm (.014 in) 25.4 mm (1 in) 6,000
1U-9974 1 203.2 mm (8 in) 15.9 mm (58 in) .36 mm (.014 in) 25.4 mm (1 in) 4,500
ID: C33524T1
Shop Supplies
Suited for use on portable air and electric tools for jobs where space limitation is a factor
For a majority of operations, higher speeds are required for effective brushing action
NOTE: As a safety precaution, end brush shanks must be fully inserted into the chuck or collet, and tightened securely.
Max. Safe
Pkg. Wire Free Speed
Part No. Qty. Description Size Dia. RPM
1U-9939 1 Knot Style .51 mm (.020 in) 25.4 mm (1 in) 20,000
1U-9942 1 Circular End .51 mm (.020 in) 38.1 mm (112 in) 15,000
1U-9943 1 Knot Style .51 mm (.020 in) 19 mm (34 in) 20,000
1U-9946 1 Galvanized .36 mm (.014 in) 76.2 mm (3 in) 5,000
4C-6157 1 Crimped Encapsulated Flair-Flex .264 mm (.0104 in) 38.1 mm (112 in) 25,000
4C-6158 1 Knot Style .36 mm (.014 in) 25.4 mm (1 in) 20,000 ID: D01191T1
Wire Brushes
Wire
Part No. Quantity Description Size Gauge RPM Arbor Length x Width Shank Material
262-9720 Brush, Cup Knot Double Row 152.4 mm (6 in) .023 6,000 5
8-11 76.2 mm x 152.4 mm (3 in x 6 in) Steel
262-9721 1 box of 10 brushes Brush End, Straight Wire 12.7 mm (12 in) .006 22,000 1
4 in Steel
262-9722 1 box of 10 brushes Brush End, Straight Wire 19 mm (34 in) .006 20,000 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9723 1 box of 10 brushes Brush End, Straight Wire 25.4 mm (1 in) .006 20,000 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9724 1 box of 10 brushes Brush Cup, Straight Wire 152.4 mm (6 in) .014 6,000 5
8-11 76.2 mm x 152.4 mm (3 in x 6 in) Steel
262-9725 Brush Cup, Knot Single Row 152.4 mm (6 in) .014 6,000 5
8-11 76.2 mm x 152.4 mm (3 in x 6 in) Steel
262-9726 1 box of 10 brushes Brush End, Straight Wire 12.7 mm (12 in) .020 22,000 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9727 1 box of 10 brushes Brush End, Straight Wire 19 mm (34 in) .020 20,000 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9728 1 box of 10 brushes Brush End, Straight Wire 25.4 mm (1 in) .020 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9729 1 box of 10 brushes Brush End, Knot 19 mm (34 in) .014 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
Brushes Abrasive
ID: D00637T1
Tube Brushes
Abrasive Brushes
ID: D00655T1
Shop Supplies
For general cleaning works great in parts washers
Will not rust or damage the surface of the part being cleaned
All poly handle and ferrule with natural fiber bristles
Tapered handle for better grip
Long bristles reach hard to clean areas Part No. Diameter Overall Length Bristle Length Pkg. Qty.
264-4359 25 mm (1 in) 25 cm (10 in) 64 mm (2.5 in) 12
ID: D00649T1
Used to clean curved and irregular shaped parts with hard to reach areas
Use in place of wire wheels, hand scrapers, and wire brushes
Typical applications include cleaning up both hydraulic cylinders and engine lower bores
Can also be used to clean rust, carbon deposits, adhesives, and tough coatings
Non-woven surface conditioning material and aluminum-oxide abrasive flaps with cloth backing
Epoxy filled center with 6.4 mm (.25 in) shank
Used to clean curved and irregular shaped parts with hard to reach areas
Use in place of wire wheels, hand scrapers, and wire brushes
Typical applications include cleaning up both hydraulic cylinders and engine lower bores
Can also be used to clean rust, carbon deposits, adhesives, and tough coatings
Discs Abrasive
Discs
ID: D00595T1
ID: D00601T1
ID: D00607T1
Abrasive Discs
Conditioning surfaces with conventional abrasive discs often results in dimensioning, gouging, or undercutting.
Wire brushes dont thoroughly remove contaminants which can lead to rework. Their wires can become loose,
fly off, and injure an operator.
Surface reconditioning discs can help reduce or eliminate these problems. They deliver superior, consistent
finishes when you need to clean, deburr, blend or finish.
Use disc coming off the edge better finish results
Aluminum Oxide
Use for gasket removal
Use for deburring, cleaning and rust removal
Use instead of wire brushes or sand paper when you dont want to remove any stock
ID: C33433T1
Pkg. Maximum Optimum
Part No. Qty. Description Diameter Operating Speed Operating Speed Use With:
5P-9709 25 Surface Conditioning Disc, A-Coarse 177.8 mm (7 in) 6,000 4,500 Grinder
Shop Supplies
6V-0185 25 Surface Conditioning Disc, A-Coarse 127.0 mm (5 in) 10,000 10,000 Grinder
1U-7622 25 Surface Conditioning Disc, A-Coarse 101.6 mm (4 in) 13,000/18,0001 10,000 Grinder/Hand Drill
4C-4384 25 Surface Conditioning Disc, A-Coarse 76.2 mm (3 in) 13,000 15,000 Grinder/Hand Drill
4C-4383 50 Surface Conditioning Disc, A-Coarse 50.8 mm (2 in) 13,000 18,000 Grinder/Hand Drill
1 Maximum speed is 13,000 if used with 4C-4763 Disc Pad Holder or 4C-4764 Disc Pad Holder and 155-3595 Adapter;
maximum speed is 18,000 if used with 1U-7623.
ID: C33433T1
Package Maximum Optimum
Part No. Quantity Description Diameter Operating Speed Operating Speed Use with:
9U-6921 10 SE Disc A Coarse 177.8 mm (7 in) 6,000 4,500 Grinder
9U-6922 10 SE Disc A Coarse 127.0 mm (5 in) 10,000 10,000 Grinder
9U-6923 10 SE Disc A Coarse 127.0 x 22.23 mm center hole
(5 x 78 in) 10,000 10,000 Grinder
9U-6924 10 SE Disc A Coarse 101.6 mm (4 in) 13,000/18,0001 10,000/15,000 Grinder/
Hand Drill
9U-6925 10 SE Disc A Coarse 101.6 x 22.23 mm center hole 13,000 10,000 Grinder/
(4 x 78 in) Hand Drill
9U-6926 10 Roloc A Coarse 76.2 mm (3 in) 18,000 15,000 Die Grinder/
Hand Drill
9U-6927 10 Roloc A Coarse 50.8 mm (2 in) 25,000 21,000 Die Grinder/
Hand Drill
1 Maximum speed is 13,000 if used with 4C-4763 Disc Pad Holder or 4C-4764 Disc Pad Holder and 155-3595 Adapter;
maximum speed is 18,000 if used with 1U-7623.
Discs Abrasive
Safety Tip
Place holder on table before turning tool on prevents pad from flying off.
ID: C44337T1
Pkg. Maximum
Part No. Qty. Use With: Description Diameter Hub/Shank Operating Speed
5P-9718 1 5P-9709 Holder 177.8 mm (7 in) 5 in-11 6,000
8
Shop Supplies
1U-7623 1 1U-7622 Pad Holder 101.6 mm (4 in) 6.35 mm shaft (14 in) 18,000
4C-4382 1 4C-4384 Pad Holder 76.2 mm (3 in) 6.35 mm shaft (14 in) 20,000
4C-4381 1 4C-4383 Pad Holder 50.8 mm (2 in) 6.35 mm shaft (14 in) 20,000
1U-5520 1 9U-6926 R-style Disc Holder 76.2 mm (3 in) 18,000
1U-5519 1 9U-6927 R-style Disc Holder 50.8 mm (2 in) 25,000
1U-5518 1 1U-5519/1U-5520 R-style Threaded Shaft
1 Female, 5 in-11; use 1U-9381 to adapt it.
8
Use a more positive retention method than the hook and loop fasteners system
R-style discs have a quarter turn male fastener embedded into the disc. The disc holder
has the corresponding female fastener.
Typically used at smaller sizes where the higher maximum operating speed requires
a more positive retention system
The disadvantage of this system is that the surface conditioning operation must always
be conducted in one direction only. Reversing the tool will unspin the disc from the holder.
Aluminum oxide
Use for gasket removal, deburring, cleaning, and rust removal
Use instead of wire brushes or sand paper when you dont want to remove any stock
ID: C44338T1
Abrasive Discs
Shop Supplies
Pkg. Maximum OptimumID: C33435T1
Part No. Qty. Description Diameter Operating Speed Operating Speed Use With:
6V-4086 1 Cutting and Polishing Disc, 152.4 x 6.35 mm 4,000 3,200 Straight Grinder
A-Medium (6 x 14 in) and Hand Drill
8T-3054 1 Clean N Strip Disc, 152.4 x 12.7 mm 4,000 3,200 Straight Grinder
Extra Coarse (6 x 12 in) and Hand Drill
4C-3868 1 Clean N Strip Disc, 101.6 x 6.35 mm 6,000 4,500 Straight Grinder
Extra Coarse (4 x 14 in) and Hand Drill
279-2267 1 Cutting and Polishing Disc 152.4 x 6.35 mm 4,000 3,200 Straight Grinder
(6 x 14 in) and Hand Drill
ID: C44340T1
ID: C44339T1
Holders
Pkg. Maximum
Part No. Qty. Use With: Description Diameter Hub/Shank Operating Speed
8T-3055 1 8T-3054 Mandrel #934 12.7 mm (12 in) 6.35 x 70.5 mm Dia. 4,000
(14 x 212 in)
6V-4087 1 6V-4086/4C-3868 Mandrel #933 6.35 mm (14 in) 6.35 shank x 25.4 mm Dia. 6,000
(14 x 1 in)
Discs Abrasive
Fine Grade
Very fine grade minimizes the chance of changing the surface profile
Identified by blue/green color both front and back of disc
Medium Grade
Medium grade material used much like coarse but is less aggressive in performance
used when very fine surface condition material is not quite aggressive enough
Ideal for work requiring less pressure such as grind marks, surface rust, and mild coatings
Brown disc with gray backing ID: C33433T1
Part No. Quantity Description Diameter Operating Speed Operating Speed Use with:
150-1197 10 Scuffing Disc A Fine, N.H. 177.8 mm (7 in) 6,000 4,500 Grinder
150-1244 10 Scuffing Disc A Fine, N.H. 127.0 mm (5 in) 10,000 10,000 Grinder
150-1246 10 Scuffing Disc A Fine 101.6 mm (4 in) 13,000/18,0001 10,000/15,000 Grinder/
Hand Drill
150-1248 10 Roloc Scuffing Disc 76.2 mm (3 in) 18,000 15,000 Die Grinder/
A Fine Hand Drill
150-1250 10 Roloc Scuffing Disc 50.8 mm (2 in) 25,000 21,000 Die Grinder/
Hand Drill
236-8092 25 Scuffing Disc 76.2 mm (3 in) 23,000 rpm 23,000 rpm Grinder
Medium
1 Maximum speed is 13,000 if used with 4C-4763, (4C-4764, 155-3595); maximum speed is 18,000 if used with 1U-7623.
ID: C44337T1
Holders
Maximum Optimum
Actual Maximum Operating Operating
Part No. Qty. Use with: Description Diameter Diameter Hub/Shank Speed Speed
5P-9718 1 150-1197 Holder 177.8 mm (7 in) 174.63 mm (678 in) 5
8 in-11 6,000 4,500
6V-0186 1 150-1244 Holder 127.0 mm (5 in) 120.65 mm (434 in) 5
8 in-11 10,000 10,000
4C-4763 1 150-1246 Holder 914 101.6 mm (4 in) 95.25 mm (334 in) M14 x 2 13,000 10,000
4C-4764 1 150-1246 Holder 914 101.6 mm (4 in) 95.25 mm (334 in) 5
8 in-11 13,000 10,000
4C-4765 1 150-1246 Holder 925 101.6 mm (4 in) 95.25 mm (334 in) 3
8 in-24 13,000 10,000
1U-7623 1 150-1246 Holder 925 101.6 mm (4 in) 98.43 mm (378 in) 1
4 in Shaft 18,000 10,000
1U-5520 1 150-1248 Roloc Disc Holder 76.2 mm (3 in) 69.85 mm (234 in) 20,000 15,000
1U-5519 1 150-1250 Roloc Disc Holder 50.8 mm (2 in) 44.45 mm (134 in) 25,000 20,000
1U-5518 1 1U-5519/1U-5520 Roloc Threaded Shaft
4C-4382 1 150-1252 Velcro Holder 923 76.2 mm (3 in) 78.03 mm (2 7.8 in) 20,000 15,000
4C-4381 1 150-1251 Velcro Holder 922 50.8 mm (2 in) 44.45 mm (134 in) 23,000 20,000
Abrasive Discs
Holders for these discs have a velcro type fastening system; not all the grinders in the shop will accept this kind of holder
For Blue Point AT425A Right Angle Grinder or similar model, a 78 inch center hole is needed
ID: C62936T1
Shop Supplies
Bristle design and 3-dimensional abrasives enable Bristle Disc to remove carbon buildup, coatings, sealants, gaskets and weld discoloration quickly, leaving a clean
surface ready for subsequent operations or inspection
Used with rotary tool such as drill or small angle grinder
Designed to compete with crimped wire and bristle cup brushes
Extends range of surface reconditioning operations where conformability and flexibility are most critical
Provides exceptional finish, outstanding performance and a safer workplace by eliminating flying metal wires
Come in 3 sizes and 3 grades
All R-style holders use 1U-5518 Threaded Shaft
Discs Abrasive
Bristle Discs
Bristle design and 3-dimensional abrasive filled fingers enable bristle disc to remove carbon buildup, coatings, sealants,
gaskets, and weld discoloration quickly, leaving a clean surface ready for subsequent operations or inspection
Used with rotary tool such as drill or right angle grinder can be used with 141-6993 Heavy-Duty Angle Grinder
Used for coating removal, weld preparation, and general cleaning
Increased safety during use bristles are mounted securely to backing, virtually eliminate flying wires common
with wire brushes
Flexible, abrasive-filled bristles conform to part's surface and clean without removing base material, helping
reduce damage and rework
Unique bristle shape resists excessive edge wear and loading with coatings, dirt, and debris to extend disc
life and performance
Resists heat build-up to reduce potential tempering or work surface damage
Threaded 58-11 inch core quickly threads onto shaft of an electric or pneumatic right angle grinder ID: C80352T1
Maximum Optimum
Operating Operating
Part No Size Grit Color Speed Speed Application
165-3945 412 50 Green 12,000 10,000 Carbon removal, weld discoloration cleaning, coating removal
165-3946 412 80 Yellow 12,000 10,000 Corrosion removal, sealant removal, general maintenance repair operations
165-3947 412 120 White 12,000 10,000 Aluminum parts
Fiber Discs
Zirconium Fiber Discs with 7/8 inch Arbor Hole
Used for medium and heavy stock removal on right-angle sanding equipment for: Part No. Grit Pad Diameter Pkg. Qty. Back-up Pad
- Cutting down and blending weld lines 268-8709 1 16 114 mm (412 in) 25 254-5307
- Cutting down filler metal, rust and scale removal, as well as deburring
1U-6827 24 114 mm (412 in) 25 254-5307
Zirconium premium grain (except where noted) outlasts aluminum oxide and runs cooler
1U-6828 36 114 mm (412 in) 25 254-5307
Performs well on stainless steel and high-tensile alloys
1U-6829 50 114 mm (412 in) 25 254-5307
22 mm (7/8 in) center hole for use with 58-11 arbor (except 236-8069 which has
1U-6830 60 114 mm (412 in) 25 254-5307
16 mm (58 in) center hole)
1U-6831 80 114 mm (412 in) 25 254-5307
Resin bond with fiber backing for strength
1U-6832 100 114 mm (412 in) 25 254-5307
Used with rib-flow backup pads 254-5307, 254-5308, and 254-5309 (except for 236-8069)
1U-6833 120 114 mm (412 in) 25 254-5307
1U-6834 24 127 mm (5 in) 25 254-5308
1U-6835 36 127 mm (5 in) 25 254-5308
1U-6836 50 127 mm (5 in) 25 254-5308
1U-6837 60 127 mm (5 in) 25 254-5308
1U-6838 80 127 mm (5 in) 25 254-5308
1U-6839 100 127 mm (5 in) 25 254-5308
1U-6840 120 127 mm (5 in) 25 254-5308
1U-6841 24 178 mm (7 in) 25 254-5309
1U-6842 36 178 mm (7 in) 25 254-5309
1U-6843 50 178 mm (7 in) 25 254-5309
1U-6844 60 178 mm (7 in) 25 254-5309
1U-6845 80 178 mm (7 in) 25 254-5309
ID: C33515T1 1U-6846 100 178 mm (7 in) 25 254-5309
Zirconium Alumina Vulcanized Fiber Disc with 58 inch Arbor Hole 1U-6847 120 178 mm (7 in) 25 254-5309
Part No. Grit Pad Diameter Pkg. Qty. 1 268-8709 Disc is aluminum oxide grain
236-8069 36 178 mm (7 in) 25
Abrasive Discs
Rib-flow backing pads allow air flow through the ribs extending disc life from 20 to 50%
Polymide construction with steel insert and arbor nut
Shipped in poly bag with 58-11 arbor flange nut
Available in three popular diameters
For use with angle grinders with a 58-11 spindle thread
254-5307 and 254-5308 will fit
141-6993 Electric Angle Grinder and Part No. Outside Diameter Max RPM Pkg. Qty. Used With1
254-5309 will fit 222-3064 254-5307 114.3 mm (4.5 in) 13,000 1 1U-6827 Fiber Disc
or 222-3065 Pneumatic Angle Grinders 254-5308 127 mm (5 in) 11,900 1 1U-6834 Fiber Disc
254-5309 177.8 mm (7 in) 8,600 1 1U-6841 Fiber Disc
1 24 grit fiber disc listed. Other grits are available.
ID: D00577T1
Shop Supplies
R-Type Mini Grinding Discs
Part No Diameter Grit Pkg. Qty.
236-8072 50.8 mm (2 in) 24 50
Aluminum oxide with resin fiber back
236-8073 50.8 mm (2 in) 36 50
Manufactured with non-carcinogenic bonding agents
safer for the environment and dissipate heat while 236-8074 50.8 mm (2 in) 50 50
providing cooler cut for longer product life 236-8075 50.8 mm (2 in) 80 50
More coarse grits (24/36) best for weld removal, 236-8076 50.8 mm (2 in) 120 50
grinding, and deburring 236-8078 76.2 mm (3 in) 24 25
50 grit best for blending; finer grits best for smooth sanding 236-8079 76.2 mm (3 in) 36 25
Resists stretching, shedding, and grain loss 236-8081 76.2 mm (3 in) 50 25
Maintain flexibility to work in contours 236-8082 76.2 mm (3 in) 80 25
Use with 1U-5519, 150-5431, 236-8083 76.2 mm (3 in) 120 25
and 1U-5520 R-Type Disc Holders
ID: D00803T1
Discs
Excellent for cleaning welds, removing tough coatings, carbon deposits, adhesives and rust
Conformable so there is less chance of under-cutting or gouging
Open web resists loading even from soft coatings and is non-metallic so it will not
contaminate the surface with metallic residues
Will work at low RPMs, such as on a 6.35 mm (14 in) drill @ 1750 RPM
Works well on other substrates such as wood, aluminum and even plastic
ID: C34433T1
Discs Abrasive
ID: D01167T1
These discs have glue on the back and are used with backup pads to deburr, blend, etc. Size Pkg.
Pressure sensitive adhesive on disc back makes changes fast and easy Part No. Grit Description Dia x Hole Qty.
Efficient on flat and contoured metal surfaces and hard to reach areas 4C-3809 36 Cloth Backed Disc 50.8 mm (2 in) 50
4C-3810 50 Cloth Backed Disc 50.8 mm (2 in) 50
4C-3811 60 Cloth Backed Disc 50.8 mm (2 in) 50
4C-3813 100 Cloth Backed Disc 50.8 mm (2 in) 50
4C-3817 80 Cloth Backed Disc 76.2 mm (3 in) 50
4C-3819 60 Cloth Backed Disc 101.6 mm (4 in) 50
4C-3821 100 Cloth Backed Disc 101.6 mm (4 in) 50
4C-3822 120 Cloth Backed Disc 101.6 mm (4 in) 50
4C-3824 80 PSA Paper Disc Rolls 127 mm (5 in) 100
4C-3834 80 Cloth Backed Disk 304.8 mm (12 in) 25
ID: C44147T1
Ideally used on dual action (DA) air and electrical Part No Diameter Grit Pkg. Qty.
random orbit sanders 236-8039 127 mm (5 in) A/O 60 100
Used on metal, plastic, fiberglass, wood, and painted surfaces 236-8040 127 mm (5 in) A/O 80 100
Anti-clog release agents are an additive process for long life 236-8041 127 mm (5 in) A/O 100 100
Quality full resin-over-resin bond 236-8042 127 mm (5 in) A/O 120 100
Each disc has protective backing to protect the adhesive 236-8043 127 mm (5 in) A/O 150 100
in dusty environments before use
236-8044 127 mm (5 in) A/O 180 100
Priced per roll
236-8045 127 mm (5 in) A/O 220 100
236-8046 127 mm (5 in) A/O 320 100
236-8047 127 mm (5 in) A/O 400 100
236-8048 152.4 mm (6 in) A/O 60 100
236-8049 152.4 mm (6 in) A/O 80 100
236-8050 152.4 mm (6 in) A/O 100 100
ID: D00809T1 236-8051 152.4 mm (6 in) A/O 120 100
236-8052 152.4 mm (6 in) A/O 150 100
236-8053 152.4 mm (6 in) A/O 180 100
236-8054 152.4 mm (6 in) A/O 220 100
236-8055 152.4 mm (6 in) A/O 320 100
236-8056 152.4 mm (6 in) A/O 400 100
Abrasive Discs
Use stick and sand disc backup pads with all PSA discs
Made of flexible rubber that tapers at the edge
Come with 6.4 mm (14 in) steel shank for fast mounting into portable tool chunks
Size Pkg.
Part No. Dia. Shank Qty.
4C-3837 50.8 mm (2 in) 6.4 mm (14 in) 1
ID: C44147T1
4C-3838 76.2 mm (3 in) 6.4 mm (14 in) 1
4C-3840 127 mm (5 in) 5 in-24 Thread Shank 1
16
Shop Supplies
Hook and Loop Sanding Discs
Thread Maximum
Part No. Diameter Size RPM
275-5264 127 mm (5 in) 5 -24 10,000
16
ID: D01597T1
Wheels Abrasive
Wheels
Constructed of the most advanced material, Clean N Strip Unitized Wheels meet the demand for aggressive
and durable cleaning products
Designed to compete with power tool wire brushing, this product provides a cleaner, burr-free surface quicker
than any wire fiber product
Constructed of a non-woven nylon web, there is no opportunity for metal contamination or rusting in this product.
It can be used on a variety of ferrous and non-ferrous metal surfaces
Used extensively in weld cleaning and conditioning applications to provide the proper surfaces for high integrity
welding and cleaned polish surfaces for non-destructive testing
Use this product for heavy-duty cleaning of rust, corrosion and coatings of all types
Density 7
Aluminum oxide
Mineral type S
Use for gasket removal, deburring, cleaning, and rust removal
Shop Supplies
Color Black
Clean up to 4 times faster than wire brushes, runs smoothly and resists loading
Grade XCS
Use instead of wire brushes or sand paper when you dont want to remove any stock
ID: C33436T1
ID: C33437T1
ID: C33443T1
Abrasive Wheels
ID: C33443T1
Shop Supplies
Ideal for the toughest applications
Provides extremely long life
High performance Zirconium offers very fast stock removal and longer life
Cool running
Smoother, more consistent performance for operator
Best choice for stainless, castings, welding seams, and hard metal grinding
Designed for grinding applications on ferrous metal such as grinding/smoothing weld seams
and cleaning/shaping metal surfaces
Material: aluminum oxide and resin
ID: D01461T1
ID: C33520T1
8T-7768 Mandres #936
Maximum operating speed 22,000
Package quantity 5
ID: C33576T1
Shop Supplies and Tools Catalog 2007 2-17
02a.qxp 10/5/06 1:26 PM Page 18
Wheels Abrasive
Fine grade flap brush replaces fine wire power brushes for removing carbon buildup, light rust and corrosion
Density 5
6V-2032 Adapter
Mineral type A
Maximum operating speed 4,000
Color Maroon
Number required 2
Grade Fine
Flap Wheels
Shop Supplies
Optimum Surface
Feet per Minute
Flap wheels consist of a series of coated abrasive pieces (forming the Speed Type Material
spokes of the wheel) which are mounted around a steel hub 5,500 Aluminum
Supplied with a 14 in-20 thread mandrel designed for fast mounting 4,000 Hardwood
Can be used on higher speed machines popular in todays market 5,000 Non-ferrous metals
Delivers smooth, chatter-free grinding 5,000 Steel (alloy)
Use with portable and benchstand grinders 5,000 Steel (mild)
6,500 Steel (stainless)
Part No. Pkg. Qty. Size Grit Max. RPM
4C-8511 10 1 in x 1 in 60 25,000 NOTE: Best speed ranges from 6,000 to
4C-8512 10 1 in x 1 in 120 25,000 9,000 SFPM (Surface feet per minute).
4C-8513 10 1 in x 1 in 180 25,000 Wheels should be operated in direction of
arrow. Never exceed maximum operating
4C-8514 10 2 in x 1 in 60 20,000
speed.
4C-8515 10 2 in x 1 in 120 20,000 ID: C80545T1
4C-8516 10 2 in x 1 in 180 20,000 Adapters
4C-8517 10 3 in x 1 in 60 20,000 Part No. Description Size
4C-8520 Adapter 1 inch x 1 inch
4C-8518 10 3 in x 1 in 120 20,000 4
ID: D00787T1
Available in three grades very fine, 254-5318 38.1 x 25.4 mm (1.5 x 1 in) Very Fine 1
medium, and coarse 254-5319 76.2 x 50.8 mm (3 x 2 in) Coarse 1
Shank size: 6.35 mm (.25 in) 254-5320 76.2 x 50.8 mm (3 x 2 in) Very Fine 1
ID: D00583T1
2-18 Shop Supplies and Tools Catalog 2007
Abrasive Wheels
Abrasive Flap Wheels Part No. Size (diameter x thickness) Grit Pkg. Qty.
254-5321 25.4 x 25.4 mm (1 x 1 in) 60 10
254-5322 25.4 x 25.4 mm (1 x 1 in) 80 10
Aluminum-oxide coated abrasive flaps with cloth backing
254-5323 25.4 x 25.4 mm (1 x 1 in) 120 10
Delivers smooth, chatter-free grinding
254-5324 25.4 x 25.4 mm (1 x 1 in) 180 10
Use with handheld grinders
254-5325 25.4 x 25.4 mm (1 x 1 in) 240 10
Mounted on 6.35 mm (.25 in) shank
254-5326 50.8 x 25.4 mm (2 x 1 in) 60 10
Available in five popular grits and three sizes
254-5327 50.8 x 25.4 mm (2 x 1 in) 80 10
254-5328 50.8 x 25.4 mm (2 x 1 in) 120 10
254-5329 50.8 x 25.4 mm (2 x 1 in) 180 10
254-5330 50.8 x 25.4 mm (2 x 1 in) 240 10
254-5331 76.2 x 25.4 mm (3 x 1 in) 60 10
254-5332 76.2 x 25.4 mm (3 x 1 in) 80 10
ID: D00589T1
254-5333 76.2 x 25.4 mm (3 x 1 in) 120 10
254-5334 76.2 x 25.4 mm (3 x 1 in) 180 10
Shop Supplies
254-5335 76.2 x 25.4 mm (3 x 1 in) 240 10
Designed for use on electrical or air powered right angle or vertical shaft grinders
Designed for rough grinding applications, including:
- grinding/smoothing weld seams
- cleaning metal surfaces
Wheels fit 114.3 mm, 177.8 mm and 228.6 mm (412 in, 7 in and 9 in) grinders
Type 28 wheels have built-in 15 angle for out of position work
Wheels comply with ANSI safety code B-7.1
Type 27
Max Wheel Size Pkg.
Part No. Type Grit Spec. RPM OD x Thick x ID/Thread Qty.
1U-6788 Std. A24 15,300 101.6 x 3.18 x 15.88 mm (4 x 18 x 58 in) 10
1U-6789 Std. A24 15,300 101.6 x 6.35 x 15.88 mm (4 x 14 x 58 in) 10
ID: C33508T1
1U-6790 Std. A24 13,300 114.3 x 3.18 x 22.23 mm (412 x 18 x 78 in) 10
1U-6791 Std. A24 13,300 114.3 x 6.35 x 22.23 mm (412 x 14 x 78 in) 10
9U-6382 Std. A24 12,220 127 x 6.35 mm x 58-11 (5 x 14 in x 58-11) 1
1U-6792 Std. A24 8,500 177.8 x 3.18 x 22.23 mm (7 x 18 x 78 in) 10
1U-6793 Std. A24 8,500 177.8 x 6.35 x 22.23 mm (7 x 14 x 78 in) 10
1U-6794 Std. A24 8,500 177.8 x 6.35 mm x 58-11 (7 x 14 in x 58-11) 10
1U-6795 Std. A24 6,600 228.6 x 6.35 x 22.23 mm (9 x 14 x 78 in) 10
1U-6796 Std. A24 6,600 228.6 x 6.35 mm x 58-11 (9 x 14 in x 58-11) 10
9U-6383 Hi Perf. Z/A241 12,220 127 x 6.35 mm x 58-11 (5 x 14 in x 58-11) 1
4C-3769 Hi Perf. Z/A241 8,500 177.8 x 6.35 x 22.23 mm (7 x 14 x 78 in) 5
4C-3770 Hi Perf. Z/A241 8,500 177.8 x 6.35 mm x 58-11 (7 x 14 in x 58-11) 5
4C-3772 Hi Perf. Z/A241 6,600 228.6 x 6.35 mm x 58-11 (9 x 14 in x 58-11) 5
Wheels Abrasive
Designed for rough grinding applications on ferrous metal such as grinding/smoothing weld seams
and cleaning/shaping metal surfaces
ID: D01461T1
Cut-Off Wheels
Shop Supplies
ID: C33510T1
ID: D00797T1
Abrasive Wheels
ID: C80474T1
Shop Supplies
Manufactured by Norton for Caterpillar
These reinforced wheels are to be used on grinders to clean up and blend
Straight wheels are to be used on portable horizontal shaft or straight shaft machines
ID: C41295T1
Cover a broad range of general bench grinding jobs Max Wheel Size Pkg.
Offer custom quality Part No. Grit Spec. RPM OD x Thick x ID Qty.
Choose aluminum oxide wheels for all types of steel 1U-6780 A36 4,140 152.4 mm x 12.7 mm x 25.4 mm (6 in x 12 in x 1 in) 1
152.4 mm, 177.8 mm, 203.2 mm, and 254 mm 1U-6781 A60 4,140 152.4 mm x 12.7 mm x 25.4 mm (6 in x 12 in x 1 in) 1
(6 in, 7 in, 8 in and 10 in) wheels are supplied with additional 1U-6782 A36 4,140 152.4 mm x 25.4 mm x 25.4 mm (6 in x 1 in x 1 in) 1
arbor bushings so one specification can meet the needs of 1U-6783 A60 4,140 152.4 mm x 25.4 mm x 25.4 mm (6 in x 1 in x 1 in) 1
several machines with different arbor sizes 1U-6784 A36 3,600 177.8 mm x 25.4 mm x 25.4 mm (7 in x 1 in x 1 in) 1
1U-6786 A36 3,600 203.2 mm x 25.4 mm x 25.4 mm (8 in x 1 in x 1 in) 1
1U-6787 A60 3,600 203.2 mm x 25.4 mm x 25.4 mm (8 in x 1 in x 1 in) 1
1U-8285 A36 2,485 254 mm x 25.4 mm x 31.75 mm (10 in x 1 in x 114 in) 1
1U-8286 A60 2,485 254 mm x 25.4 mm x 31.75 mm (10 in x 1 in x 114 in) 1
1U-8289 A36 2,070 304.8 mm x 50.8 mm x 31.75 mm (12 in x 2 in x 114 in) 1
1U-8290 A60 2,070 304.8 mm x 50.8 mm x 31.75 mm (12 in x 2 in x 114 in) 1
ID: C33511T1
Miscellaneous
Shop Supplies
Every workplace has uses for non-woven nylon abrasive hand padswhenever surfaces must be conditioned or cleaned by hand
Used to clean surfaces or remove rust, oxides, paint discoloration, and other surface contaminants
Impart and blend cosmetic finishes on metal or highlight wood finishes
Hand deburr metals and plastics quickly and economically
Used with optional 4C-4175 Hand Pad Holder
Size: 152 x 229 mm (6 x 9 in)
ID: D00613T1
Tear off strip and insert in the mandrel to use in corners and other hard to reach areas
Use on air drills
Maximum operating speed 6,000 RPM with 25.4 x 38.1 mm (1 in x 112 in)
flat stock (roll or hand pad)
Package quantity 5
ID: C44336T1
2-22 Shop Supplies and Tools Catalog 2007
02a.qxp 10/5/06 1:26 PM Page 23
Abrasive Miscellaneous
High quality, emery Use this fine grade polishing stone to remove
paper required for salvage the sharp, raised edges of nicks and
or cleaning of numerous burrs on machine components
Caterpillar parts More useful than the
Light duty, fine polishing emery paper where
a burr or raised
edge is large.
Should always
Sheet size 22.86 x 34.93 cm (9 x 13.75 in) be used with a
Grit 4/0 lightweight oil
ID: D01467T1 ID: A92453T1
Quantity 100 sheets/package Dimensions 100 mm x 25 mm x 6 mm (4 in x 1 in x .25 in)
Package quantity 1
Shop Supplies
These cloth shop rolls are cut in various widths and can be torn to the desired length for hand deburring
For contour sanding, stripping, deburring, rust removal, cutdown prior to polishing, and all general maintenance work
Size Pkg. Size Pkg.
Part No. Grit Width x Length Qty. Part No. Grit Width x Length Qty.
262-9732 180J 25 mm x 45.7 m 1 4C-8523 120J 38.1 mm x 22.7 m 1
(1 in x 50 yd) (112 in x 25 yd)
262-9737 320J 25 mm x 45.7 m 1 4C-8524 180J 38.1 mm x 22.7 m 1
(1 in x 50 yd) (112 in x 25 yd)
262-9740 400J 25 mm x 45.7 m 1 1U-6849 80J 38.1 mm x 45.7 m 1
(1 in x 50 yd) (112 in x 50 yd)
269-7255 80J 25 mm x 45.7 m 1 1U-6850 120J 38.1 mm x 45.7 m 1
(1 in x 50 yd) (112 in x 50 yd)
269-7256 100J 25 mm x 45.7 m 1 1U-6851 180J 38.1 mm x 45.7 m 1
(1 in x 50 yd) (112 in x 50 yd)
269-7257 120J 25 mm x 45.7 m 1 1U-6852 240J 38.1 mm x 45.7 m 1
(1 in x 50 yd) (112 in x 50 yd) ID: C33516T1
269-7258 220J 25 mm x 45.7 m 1 1U-6853 320J 38.1 mm x 45.7 m 1 Size Pkg.
(1 in x 50 yd) (112 in x 50 yd) Part No. Grit Width x Length Qty.
269-7259 280J 25 mm x 45.7 m 1 1U-8274 60J 50.8 mm x 45.7 m 1 1U-8278 180J 50.8 mm x 45.7 m 1
(1 in x 50 yd) (2 in x 50 yd) (2 in x 50 yd)
269-7260 500J 25 mm x 45.7 m 1 1U-8275 80J 50.8 mm x 45.7 m 1 1U-8279 240J 50.8 mm x 45.7 m 1
(1 in x 50 yd) (2 in x 50 yd) (2 in x 50 yd)
1U-6848 60J 38.1 mm x 45.7 m 1 1U-8276 100J 50.8 mm x 45.7 m 1 1U-8280 320J 50.8 mm x 45.7 m 1
(112 in x 50 yd) (2 in x 50 yd) (2 in x 50 yd)
4C-8522 80J 38.1 mm x 22.7 m 1 1U-8277 120J 50.8 mm x 45.7 m 1 262-9741 400J 50.8 mm x 45.7 m 1
(112 in x 25 yd) (2 in x 50 yd) (2 in x 50 yd)
Sheets Pkg.
Part No. Grit Abrasive Size Qty.
1U-6854 60J Aluminum Oxide 228.6 x 279.4 mm 25
(9 in x 11 in)
These sheets are used for sanding and metal surface preparation
1U-6855 80J Aluminum Oxide 228.6 x 279.4 mm 25
Engineered for maximum economy, fast cutting and smoothing action (9 in x 11 in)
Excellent for scouring, deburring, scale and rust removal 1U-6856 120J Aluminum Oxide 228.6 x 279.4 mm 50
(9 in x 11 in)
1U-6857 180J Aluminum Oxide 228.6 x 279.4 mm 50
(9 in x 11 in)
1U-6858 240J Aluminum Oxide 228.6 x 279.4 mm 50
(9 in x 11 in)
1U-6859 320J Aluminum Oxide 228.6 x 279.4 mm 50
(9 in x 11 in)
1U-8281 400A Silicon Carbide 228.6 x 279.4 mm 50
(9 in x 11 in)
1U-8282 500A Silicon Carbide 228.6 x 279.4 mm 50
(9 in x 11 in)
1U-8283 600A Silicon Carbide 228.6 x 279.4 mm 50
(9 in x 11 in)
4C-8510 Crocus Ferrous Oxide 228.6 x 279.4 mm 50
ID: C33517T1 (9 in x 11 in)
Miscellaneous Abrasive
Sanding Belts
ID: D01455T1
Perfect choice for cleaning and polishing the inside diameters of pipe, tubing, cylinders and other interior spaces
Star shape allows the star tips to provide constant outward pressure on the walls to produce uniform and consistent results
Can be mounted singly or in multiples for efficient inside diameter cleaning and polishing operations
Adapter: 4C-8629 Mandrel
Abrasive Miscellaneous
Shop Supplies
free of any fragmented, amorphous or smeared metal from previous operations 1U-7428 1 101.6 mm (4 in) 240
Accomplished at a low pressure where the stones float 4C-6335 1 104.78 mm (418 in) 240
Hone crosshatch is extremely efficient in providing a multiplicity of oil grooves or valleys 4C-6336 1 114.3 mm (412 in) 240
for oil retention as opposed to the uni-directional or uneven valleys common to the conventional 4C-6337 1 12.7 mm (12 in) 320
type rigid hone. A crosshatch that usually remains as the cylinder wall has been wear-reduced 4C-6338 1 15.88 mm (58 in) 320
by the hone.
4C-6339 1 19 mm (34 in) 320
4C-6340 1 25.4 mm (1 in) 320
4C-6341 1 38.1 mm (112 in) 320
Mounted Points
Mounted wheels are used with horizontal or straight shaft, die and pencil grinders
on jobs where larger wheels will not fit
Offer maximum performance for grinding ferrous metals
Accurate spindles ensure precision grinding and minimize run-out
A-shaped wheels are for medium to heavy-duty blending and contouring
W-shaped wheels are for off-hand and precision grinding of medium to heavy stock
ID: C44148T1
Miscellaneous Abrasive
ID: C80473T1
Size Pkg.
Item Part No. Grit Spec. OD x Length x Thread Qty.
Type 18 1U-6814 A24 38.1 mm x 63.5 mm x 58 in-11 (112 in x 212 in x 58 in-11) 10
Type 18R 1U-6815 A24 38.1 mm x 63.5 mm x 58 in-11 (112 in x 212 in x 58 in-11) 10
Type 16 1U-6812 A24 38.1 mm x 76.2 mm x 58 in-11 (112 in x 3 in x 58 in-11) 10
Type 18R 1U-6816 A24 50.8 mm x 76.2 mm x 58 in-11 (2 in x 3 in x 58 in-11) 10
Type 17 1U-6813 A24 63.5 mm x 76.2 mm x 58 in-11 (212 in x 3 in x 58 in-11) 10
Abrasive Miscellaneous
Use for superfast makeready of copper pipe joints 4C-8522 112 in x 25 ft (Grit 80)
Removes scale, corrosion and oxidations without clogging sanding residue falls through the backing 4C-8523 112 in x 25 ft (Grit 120)
Long abrasive life and clean, tight connections are ensured 4C-8524 112 in x 25 ft (Grit 180)
Silicon carbide abrasive grain is coated on both sides of an open weave, cloth backing
Decal Remover
Fast and easy method to remove vinyl decals, graphics, tapes, films and adhesives
without damaging paint no fire danger because the discs are non combustible
Unique construction of the disc assures long life and allows easy
conformability to contours
Shop Supplies
Discs are flexible and have no sharp edges will not damage acrylic, enamel
or urethane paint. (not recommended for use on acrylic lacquer paints or plexiglass)
Faster and cleaner to use than solvent or chemical adhesive removers
RPM is critical for product performance maximum RPM is 4500;
recommended RPM is 3,000 to 4,000
Package
Part No. Description Quantity Diameter Use with:
226-0125 Decal Removal Disc 1 101.6 mm x 9.53 mm Electric or Air Drill
(4 in x 38 in)
ID: C62937T1
226-0126 Retainer Roloc 1 25.4 mm x 6.35 mm
and Holder (1 in x 14 in)
Industrial quality
Ideal for scraping paint and glass, cutting, and trimming
Fits all standard razor blade tools
Gauge: 0.009
Quantity: 5 per package/100 per carton
ID: D01323T1
ID: D00684T1
Drills
The Shop Supplies and Tools Group has a comprehensive line of high quality drill bits. The product offering includes drills ranging from standard jobber
length, general purpose drills, to high quality, long lasting cobalt drills, 118 and 135 split point configurations.
Standard Drills
118 point 1U-5889 Drill Set 1U-5714 Drill Set (Plus Index), 29 Piece
High quality M-7 steel (Plus Index), 13 Piece
Part No. Size Part No. Size Part No. Size
Straight shank jobber length Part No. Size 1 13 11
1U-5589 16 in 1U-5598 64 in 1U-5607 32 in
1U-5589 1 in
16 5 7 23
1U-5590 64 in 1U-5599 32 in 1U-5608 64 in
Applications 1U-5590 5
64 in
1U-5591 3 in 1U-5600 15 in 1U-5609 3 in
32 64 8
Mild steel 1U-5591 3
32 in
1U-5592 7 in 1U-5601 1 in 1U-5610 25 in
64 4 64
Cast iron 1U-5592 7
64 in
1U-5593 1 17 13
8 in 1U-5602 64 in 1U-5611 32 in
Shop Supplies
1U-5593 1 in
8 9 9 27
1U-5594 64 in 1U-5603 32 in 1U-5612 64 in
1U-5594 9 in
64 5 7
1U-5595 32 in 1U-5604 19
64 in
1U-5613 16 in
1U-5595 5 in
32 11 29
1U-5596 64 in 1U-5605 5
16 in 1U-5614 64 in
1U-5596 11 in
64 3 15
1U-5597 16 in 1U-5606 21
64 in 1U-5615 32 in
1U-5597 3 in
16 31
1U-5616 64 in
1U-5598 13 in
64 1
1U-5617 2 in
1U-5599 7 in
32
15
Individual Drills
1U-5600 64 in
1U-5601 1 in Part No. Size Part No. Size Part No. Size
4
1U-5586 1 in 1U-5597 3 in 1U-5606 21 in
64 16 64
1U-5617 1 in
2
1U-5630 13 in
64
ID: C33399T1 1U-5631 7
32 in
1U-5893 Drill Set (Plus Index), 29 Piece 1U-5632 15
64 in
Shop Supplies
Part No. Size Part No. Size Part No. Size 1U-5633 1 in
4
1U-5624 7
64 in 1U-5634 17
64 in 1U-5644 27
64 in Part No. Size Part No. Size Part No. Size
1 9 7 1U-5620 3 in 1U-5630 13 in 1U-5640 23 in
1U-5625 8 in 1U-5635 32 in 1U-5645 16 in 64 64 64
9 19 29 1U-5621 1 in 1U-5631 7 in 1U-5641 3 in
1U-5626 64 in 1U-5636 64 in 1U-5646 64 in 16 32 8
5 5 15 1U-5622 5 in 1U-5632 15 in 1U-5642 25 in
1U-5627 32 in 1U-5637 16 in 1U-5647 32 in 64 64 64
11 21 31 1U-5623 3 in 1U-5633 1 in 1U-5643 13 in
1U-5628 64 in 1U-5638 64 in 1U-5648 64 in 32 4 32
3 11 1 1U-5624 7 in 1U-5634 17 in 1U-5646 29 in
1U-5629 16 in 1U-5639 32 in 1U-5649 2 in 64 64 64
13 23 1U-5625 1 in 1U-5635 9 in 1U-5644 27 in
1U-5630 64 in 1U-5640 64 in 8 32 64
1U-5628 11 31
64 in 1U-5638 21
64 in 1U-5648 64 in
1U-5629 3 in 1U-5639 11 1U-5649 1 in
16 32 in 2
1U-5396 7 in
32
1U-5397 15 in
64 Individual Drills
1U-5398 1 in
4 Part No. Size Part No. Size Part No. Size
1U-5386 1 in 1U-5397 15 in 1U-5408 13 in
16 64 32
Left Hand Drills Part No. Size Part No. Size Part No. Size
4C-3335 1 in 4C-3346 13 in 13
16 64 4C-3357 32 in
4C-3336 5 in 4C-3347 1 in 27
64 4 4C-3358 64 in
Index set not available
Shop Supplies
4C-3337 3 in 4C-3348 17 in 7
32 64 4C-3359 16 in
135 split point 7 9
4C-3338 64 in 4C-3349 32 in 4C-3360 28
64 in
Self-centering capability 1 19
4C-3339 8 in 4C-3350 64 in 4C-3361 15
32 in
M-7 steel 9 5
4C-3340 64 in 4C-3351 16 in 4C-3362 31
64 in
Excellent for removing broken 5 21
4C-3341 32 in 4C-3352 64 in 4C-3363 1
2 in
studs and fasteners
4C-3342 11 in 4C-3353 11 in
64 32
4C-3343 3 in 4C-3354 23 in
16 64
4C-3344 13 in 4C-3355 3 in
64 8
4C-3345 7 in 4C-3356 25 in
32 64
ID: C41288T1
Empty drill index for storing 29 different sizes of jobber length drill bits from Extends drill reach 304.8 mm (12 in)
1 inch to 1 inch in 1 inch increments
16 2 64 Accepts up to 14 inch diameter shank
Typical use: left hand drills
Hand Taps
Shop Supplies
Caterpillar offers five types of hand taps, Machine Screws
available by individual part numbers and
in sets (indexes). Machine Screw Sizes Individual
- Machine screw Part Numbers
- Fractional Nominal Threads Pitch Dia. No. of Thread Overall
- Taper pipe Size Per Inch Limits Flutes Taper Plug Bottoming Length Length
0 80 NF H1 2 1P-3001 5 in 158 in
- Special thread taps 16
- Metric 1 64 NC H1 2 1P-3002 3
8 in 11116 in
1 72 NF H1 2 1P-3003 3 in 11116 in
Made of high speed M-7 steel for longer life 8
2 56 NC H2 3 1P-3004 7 in 134 in
These are ground thread taps providing tolerance 16
designed for Class 2 Thread, 2 64 NF H2 3 1P-3005 7
16 in 134 in
exceeds quality of carbon steel taps 3 48 NC H2 3 1P-3006 1
2 in 11316 in
Offered in tapered, plug and bottoming versions 3 56 NF H2 3 1P-3007 1
2 in 11316 in
4 40 NC H2 3 4C-5008 1P-3008 4C-5015 9 in 178 in
16
4 48 NF H2 3 1P-3009 9 178 in
16 in
5 40 NC H2 3 1P-3010 5 in 11516 in
8
5 44 NF H2 3 1P-3011 5 in 11516 in
8
6 40 NF H2 3 1P-3013 11 in 2 in
16
8 36 NF H2 4 1P-3015 3 in 218 in
4
ID: C07893T1
ID: B00047T1
Shop Supplies
7 9 NC 1P-2995 158 in 7 in
8 8
14 NF 1P-2996
1 8 NC 1P-2997 11316 in 1 in
14 NS 3P-2213
1P-2999 Case
ID: 75999-1T1
4C-4963 Hexagon Rethreading Hexagon Rethreading Metric Hexagon Rethreading Pipe
Metric Die Set Dies Individual Dies Individual
Includes plastic index
Nominal Dimensions
Dimensions Size and Part Across
Nominal Part Across Pitch No. Flat Thickness
Size (inch) No. Flat Thickness M6 x 1.00 8T-3064 19 in 1 in
32 4
7 7 7 M5 x 0.80 8T-3063 19 in 1 in
16 14 NC 1P-2985 8 in 16 in 32 4
20 NF 1P-2986 M7 x 1.00 8T-3065 11
16 in 5
16 in
1 13 NC 1P-2987 1116 in 1 in 25 3
2 2 M9 x 1.00 8T-3067 32 in 8 in
20 NF 1P-2988 25 3
M9 x 1.25 8T-3068 32 in 8 in
9 12 NC 1P-2989 1116 in 1 in
16 2 7 7
M10 x 1.25 8T-3069 8 in 16 in
18 NF 1P-2990
M11 x 1.50 8T-3071 7 in 7 in
5 8 16
8 11 NC 1P-2991 114 in 5
8 in
18 NF 1P-2992 M12 x 1.25 8T-3072 1116 in 1
2 in
3
4 10 NC 1P-2993 1716 in 3
4 in M12 x 1.50 8T-3073 1116 in 1
2 in
16 NF 1P-2994 M13 x 1.50 8T-3075 1116 in 1
2 in
7 9 NC 1P-2995 158 in 7 in
8 8 M14 x 1.50 9F-9398
14 NF 1P-2996
M15 x 1.50 8T-3076 114 in 5
8 in
1 8 NC 1P-2997 11316 in 1 in
12 NF 1P-2998 M16 x 1.00 4C-4182 114 in 7
16 in
14 NS 3P-2213 M16 x 1.50 8T-3077 114 in 5
8 in
118 12 NF 4C-5494 2 in 1 in
Precision dies restore threads to their original condition to make reassembly of matching parts easier
Eliminates the need for expensive thread-cutting equipment
Tighten the tool slightly on the good threads, then back off over the damaged thread area to restore the threads
OTC Per
Part No. No. Capacity Description Weight
1U-7521 7402 4, 5, 6, 7, 712, 8, 9, 10, Standard Thread Chaser (complete with 6 dies) 1.36 kg (3 lbs)
11, 1112, 12, 14, 16, 18, 20, 24
1U-7610 202817 1 mm-1.25 mm-1.5 mm-1.75 mm; Dies only (3 dies) .45 kg (1 lb)
2 mm-2.5 mm-3.0 mm-3.5 mm; 4 mm
ID: C54852T1
Used to renew damaged external threads on any diameter shaft (right or left handed)
Cross-cut and thread proportional to thread pitch (helps eliminate file skipping
or jumping out of fine pitches)
3
Each file has eight separate pitches
Makes thread repairs without using a thread die 2
Red plastic handle protects hands
Each file is individually packaged in a plastic tube
Carrying pouch keeps files together
Files can also be ordered separately
Reference
RENR1113 Service Manual, 312B Excavators Machine Systems Disassembly and Assembly
SENR6139 Service Manual, 311 and 312 Excavators Machine Systems Disassembly and Assembly
NOTE: These are ground thread taps meeting requirements of right hand American
Standard Pipe Form (NPT) and American Standard Dryseal Pipe Form (NPTF). Dryseal taps
are used to tap fittings which will give a pressure tight joint without use of a sealer.
Shop Supplies
ID: C07889T1
Tap Wrenches
ID: C54429T1
Use With:
Fractional Machine Metric
Description/Usage Part No. Length Taps Screw Taps Taps
Slip Handle 4C-5026 69.85 mm (2.75 in) 1 in - 1 in 0-14 1 - 6 mm
16 4
The T-Handle may be slipped from side to side to permit a complete turn in close quarters.
Plain Handle 4C-5027 69.85 mm (2.75 in) 1 in - 1 in 0-14 1 - 6 mm
16 4
An all purpose wrench with fixed handle. Ideal for ordinary out in the open tapping jobs.
Long Shank 4C-5028 222.25 mm (8.75 in) 116 in - 14 in 0-14 1 - 6 mm
The long shank permits tapping in hard to get at places encountered in machine and automobile repair work.
Ratchet 4C-5029 95.25 mm (3.75 in) 1 in - 1 in 0-14 1 - 6 mm
16 4
The combination of ratchet and slip handle make this an all around wrench capable of handling most hand
tapping jobs.
ID: C54430T1
Thread Inserts
Heli-Coil Inserts
Effective and universally accepted method of thread repair
Quickly and permanently restore stripped, worn or damaged threads to their original size and condition
Shop Supplies
Inserts work in any material: aluminum, magnesium, cast iron, bronze, etc
Increasing use of lightweight (and soft) materials means more thread damage there is a Heli-Coil repair for virtually every application
Reference
For detailed information on Heli-Coil Inserts order NEHP5567,
Screw Thread Inserts for Maintenance, Repair and Overhaul. ID: C79650T1
ID: C44051T1
Both sets contain repairs for the most commonly used thread sizes
Two Master Sets for inch sizes are available: one for Inch Coarse (4C-8364) and one for Inch Fine (4C-8365)
The coarse set contains six sizes: 14 inch, 516 inch, 38 inch, 716 inch, 12 inch and 58 inch
The fine set has six sizes: #10, 14 inch 516 inch,38 inch, 716 inch and 12 inch
Each set has a drill, tap, installation tool, a quantity of inserts for each size, and complete instructions
NOTE: Installation tools, prewinder and mandrel included in Fine Series only.
ID: C44052T1
4C-8364 Inch Coarse Master Thread Repair Set 4C-8365 Inch Fine Master Thread Repair Set
Insert Insert
Thread Pkg. Insert Tap Drill Installation Thread Pkg. Insert Tap Drill Installation
Size and Length Part No. Qty. Part No. Size Tool Part No. Size and Length Part No. Qty. Part No. Size Tool Part No.
1 in-20 x .375 in 4C-8419 12 4C-9681 17 in 8T-2692 10-32 x .285 in 4C-8433 12 4C-9687 13 in 8T-2727
4 64 64
5 21 1 17
16 in-18 x .469 in 4C-8420 12 4C-9682 64 in 8T-2695 4 in-28 x .375 in 4C-8434 12 4C-9688 64 in 8T-2730
3 in-16 x .562 in 4C-8421 12 4C-9683 25 in 8T-2698 5 in-24 x .469 in 4C-8435 12 4C-9689 21 in 8T-2733
8 64 16 64
7 in-14 x .656 in 4C-8422 6 4C-9684 29 in 8T-2703 3 in-24 x .562 in 4C-8436 12 4C-9690 25 in 8T-2736
16 64 8 64
1 in-13 x .750 in 4C-8423 6 4C-9685 17 in 8T-2706 7 in-20 x .656 in 4C-8437 6 4C-9691 29 in 8T-2739
2 32 16 64
5 in-11 x.938 in 4C-8425 6 4C-9686 21 in 6V-9083 1 in-20 x .750 in 4C-8438 6 4C-9692 33 in 8T-2742
8 32 2 64
8 32
Metric Coarse Thread Repair Kits M10 x 1.25 15.0 4C-8410 12 4C-9715 13
32 8T-2763
Kits include insert, tap, installation tool, tang break-off tool, and drill
Tang break-off tool included in M5 through M12 only
Shop Supplies
M7 x 1 10.5 4C-8400 12 4C-9705 8T-2787 4C-8450 12 9 1U-5635
32
Preferred method of repair specified by virtually all U.S. and foreign vehicle manufacturers.
Installation
Thread Kit Inserts Tap Tool Insert Pkg. Insert
Size Reach Part No. per Kit Part No. Part No. Reach Part No. Qty.
14-1.25 mm 3 in 4C-8416 6 3 in 9U-5121 6
8 8
7 in 4C-8416 6 7 in 9U-5122 6
16 16
1 in
2 4C-8416 6 8T-2801 8T-2802 1 in
2 9U-5123 6ID: C44050T1
3 in 4C-8416 6 3 in 9U-5124 6
4 4
.472 in 4C-8416 6 .472 in 9U-5125 6
18-1.50 mm 1 in 4C-8417 24 4C-8478 4C-8495 1 in 4C-8466 6
2 2
7 in-18 1 in-58 in 4C-8418 10 4C-8479 4C-8496 1 in-58 in 4C-8467 5
8 2 2
Carded Inserts
Inserts are carded according to thread size for easy handling and display
Contained in a vial marked with part number, thread size, and length
The length of insert in Inch and Metric packages is 112 times the diameter of the bolt
providing sufficient strength in most applications
Spark Plug Inserts are packaged in lengths corresponding to the various spark plug reaches
Metric Fine
Inch Coarse Inch Fine
Thread Thread Pkg. Insert
Thread Thread Pkg. Insert Thread Thread Pkg. Insert ID: C44245T1 Size Length Part No. Qty.
Size Length Part No. Qty. Size Length Part No. Qty.
Metric Coarse M8 x 1 12.0 4C-8458 12
1
4-20 .375 4C-8419 12 10-32 .285 4C-8433 12
Thread Thread Pkg. Insert M10 x 1 15.0 4C-8459 12
5 1
16-18 .469 4C-8420 12 4-28 .375 4C-8434 12
Size Length Part No. Qty. M10 x 1.25 15.0 4C-8460 12
3 5
8-16 .562 4C-8421 12 16-24 .469 4C-8435 12
M5 x 0.8 7.5 4C-8448 12 M12 x 1.25 18.0 4C-8461 6
7 3
16-14 .656 4C-8422 6 8-24 .562 4C-8436 12
Shop Supplies
114.30 (4.50) 51 in 3 -12 8M-8290 9M-1512 8M-8289 9F-7143 8M-8292 8M-8291 8M-8291
74 4
114.30 (4.50) 29 in 7 -12 9M-6595 8S-6027 8S-6026 9M-6594 9F-7143 9M-6593 9M-6596
32 8
158.75 (6.25) 1.0 1 -12 8F-5576 8S-6031 8S-6030 9F-7146 9F-7143 8S-6402 9F-7145 M8-1.25 x 16 mm 9U-5177 4C-8475 8T-2790
1 4H-0119 Pilot is required to locate drill guide and tap guide in later cylinder heads using the larger retainers. M16-2 x 32 mm 9U-5604 4C-9732 8T-2799
Shop Supplies
Provides high strength, reliability, and maximum pullout strength
Easy to remove ID: C44143T1
Typical Applications Easy Installation/Four Simple Steps English Thread Insert Removal Data
Buses 1. Drill out old threads using specified drill size. Internal Drill Drill Drill
Trucks 2. Tap new threads using specified tap size. Thread Size Size Depth Part No.
10-24 9 in 3.2 mm (.12 in) 1U-5603
Heavy equipment 3. Screw in insert until slightly below surface. Lock-tabs act as depth stop. 32
10-32
Marine equipment
4. Drive lock-tabs into the surrounding base material with several light taps 1
4-20
11
32 in 4.8 mm (.19 in) 1U-5607
Machinery on installation tool to securely lock the insert against rotation. 1
4-28
Tooling 5 13
16-18 32 in 4.8 mm (.19 in) 1U-5611
Power tools 5
16-24
Metric Thread Insert Removal Data
Recreational vehicles 3
8-16
15
32 in 4.8 mm (.19 in) 1U-5615
Internal Drill Drill Drill 3
8-24
Small engines
Thread Size Size Depth Part No. 7 17
16-14 32 in 4.8 mm (.19 in) 1U-5682
M6 7.50 mm 4.3 mm (.17 in) 1U-8160 7
16-20
M8 9.50 mm 4.3 mm (.17 in) 1U-8167 1
2-13
21
32 in 4.8 mm (.19 in) 1U-5686
1
M10 11.50 mm 4.3 mm (.17 in) 1U-8171 2-20
9 21
M12 13.50 mm 4.3 mm (.17 in) 1U-8171 16-12 32 in 4.8 mm (.19 in) 1U-5686
9
16-18
M16 17.75 mm 6.3 mm (.25 in)
5 25
8-11 32 in 4.8 mm (.19 in) 1U-5690
M20 25.75 mm 6.3 mm (.25 in) 5
8-18
M24 28.75 mm 6.3 mm (.25 in) 3 31
4-10 32 in 7.9 mm (.31 in) 1U-5696
3
4-16
7 1 332 in
8-9 7.9 mm (.31 in) 1U-5700
7
8-14
Insert Kits
Used to repair threads of one specific size
These insert kits include inserts of one size, a driver,
and installation instructions
Insert kits come in both English and metric threads
Reference
Special Instruction SEHS8792; Using Caterpillar Replacement Thread Inserts
ID: A71410T1
Internal Insert Kit No. of Replacement No. of Insert Data Installation Data
Thread Part Inserts Kit Inserts External Tap Drill Drill Csink Tap Tap
No. No. Per Kit Part No. Per Kit Thread Length Dia. Part No. Dia. 1 Size Part No.
10-24 9S-3510 15 9S-3674 45 3/ -16 7.8 mm (.31 in) Q 1U-5606 9.6 mm (.38 in) 3/ -16 1P-3025
8 8
10-32 9S-3509 15 9S-3673 45 3/ -16 7.8 mm (.31 in) Q 1U-5606 9.6 mm (.38 in) 3/ -16 1P-3025
8 8
1/ -20 9U-5053 13 9U-5054 40 7/ -14 9.4 mm (.37 in) X 1U-5610 11 mm (.44 in) 7/ -14 1P-3027
4 16 16
1/ -28 9U-5055 13 9U-5056 40 7/ -14 9.4 mm (.37 in) X 1U-5610 11 mm (.44 in) 7/ -14 1P-3027
4 16 16
5/ -18 9U-5057 8 9U-5058 25 1/ -13 11 mm (.43 in) 27/ 1U-5614 13 mm (.51 in) 1/ -13 1P-3029
16 2 64 2
5/ -24 9U-5059 8 9U-5060 25 1/ -13 11 mm (.43 in) 27/ 1U-5614 13 mm (.51 in) 1/ -13 1P-3029
16 2 64 2
3/ -16 9S-3618 6 9S-3651 20 9/ -12 13 mm (.50 in) 33/ 1U-7433 14 mm (.57 in) 9/ -12 1P-3031
8 16 64 16
3/ -24 9S-3515 6 9S-3641 20 9/ -12 13 mm (.50 in) 33/ 1U-7433 14 mm (.57 in) 9/ -12 1P-3031
8 16 64 16
7/ -14 9S-3620 6 9S-3652 18 5/ -11 16 mm (.62 in) 37/ 1U-7434 16 mm (.63 in) 5/ -11 1P-3033
16 8 64 8
7/ -20 9S-3619 6 9S-3642 18 5/ -11 16 mm (.62 in) 37/ 1U-7434 16 mm (.63 in) 5/ -11 1P-3033
16 8 64 8
1/ -13 9S-3622 5 9S-3653 15 3/ -16 16 mm (.62 in) 45/ 1U-7435 19 mm (.76 in) 3/ -16 1P-3036
2 4 64 4
1/ -20 9S-3621 5 9S-3643 15 3/ -16 16 mm (.62 in) 45/ 1U-7435 19 mm (.76 in) 3/ -16 1P-3036
2 4 64 4
9/ -12 9S-3624 3 9S-3654 10 3/ -16 20 mm (.81 in) 45/ 1U-7435 19 mm (.76 in) 3/ -16 1P-3036
16 4 64 4
9/ -18 9S-3623 3 9S-3644 10 3/ -16 20 mm (.81 in) 45/ 1U-7435 19 mm (.76 in) 3/ -16 1P-3036
16 4 64 4
5/ -11 9S-3626 2 9S-3655 9 7/ -14 22 mm (.87 in) 53/ 1U-7436 22 mm (.88 in) 7/ -14 1P-3038
8 8 64 8
5/ -18 9S-3625 2 9S-3645 9 7/ -14 22 mm (.87 in) 53/ 1U-7436 22 mm (.88 in) 7/ -14 1P-3038
8 8 64 8
3/ -10 9S-3628 2 9S-3656 6 11/8-12 28 mm (1.12 in) 11/16 1U-5699 29 mm (1.14 in) 11/8-12 1P-3041
4
3/ -16 9S-3627 2 9S-3646 6 11/8-12 28 mm (1.12 in) 11/16 1U-5699 29 mm (1.14 in) 11/8-12 1P-3041
4
7/ -9 9S-3630 2 9S-3657 5 11/4-12 32 mm (1.25 in) 13/16 1U-5703 32 mm (1.27 in) 11/4-12 1P-3042
8
7/ -14 9S-3629 2 9S-3647 5 11/4-12 32 mm (1.25 in) 13/16 1U-5703 32 mm (1.27 in) 11/4-12 1P-3042
8
1-8 9S-3632 2 9S-3658 4 13/8-12 35 mm (1.37 in) 15/16 1U-5707 35 mm (1.39 in) 13/8-12 1P-3043
1-14 9S-3631 2 9S-3648 4 13/8-12 35 mm (1.37 in) 15/16 1U-5707 35 mm (1.39 in) 13/8-12 1P-3043
11/8-7 9S-3633 2 9S-3675 3 11/2-12 41 mm (1.62 in) 17/16 1U-5711 39 mm (1.52 in) 11/2-12 1P-3044
11/8-12 9S-3634 2 9S-3676 3 11/2-12 41 mm (1.62 in) 17/16 1U-5711 39 mm (1.52 in) 11/2-12 1P-3044
11/4-7 9S-3635 2 9S-3677 2 15/8-12 46 mm (1.81 in) 19/16 1U-7437 41 mm (1.62 in) 15/8-12
11/4-12 9S-3636 2 9S-3678 2 15/8-12 46 mm (1.81 in) 19/16 1U-7437 41 mm (1.62 in) 15/8-12
11/2-6 9S-3637 2 9S-3679 2 17/8-12 51 mm (2.00 in) 113/16 1U-7438 48 mm (1.89 in) 17/8-12
11/2-12 9S-3638 2 9S-3680 2 17/8-12 51 mm (2.00 in) 113/16 1U-7438 48 mm (1.89 in) 17/8-12
M6-1 246-7511 10 246-7520 25 M10-1.25 10 mm (.39 in) 8.8 mm 1U-8165 10.25 mm (.40 in) M10-1.25 8T-3086
M8-1.25 246-7513 10 246-7521 25 M12-1.25 12 mm (.47 in) 10.8 mm 1U-8169 12.25 mm (.48 in) M12-1.25 8T-3089
M10-1.5 246-7514 10 246-7522 20 M14-1.5 14 mm (.55 in) 12.8 mm 1U-8173 14.25 mm (.56 in) M14-1.5 8T-3093
M10-1.25 246-7515 5 246-7523 10 M14-1.5 14 mm (.55 in) 12.8 mm 1U-8173 14.25 mm (.56 in) M14-1.5 8T-3093
M12-1.75 246-7516 5 246-7524 10 M16-1.5 16 mm (.63 in) 14.7 mm 1U-8177 16.25 mm (.64 in) M16-1.5 8T-3095
M16-2 246-7517 3 246-7525 5 M22-1.5 22 mm (.87 in) 20.5 mm 22.25 mm (.87 in) M22-1.5 156-8166
M20-2.5 246-7518 3 246-7526 5 M30-2 30 mm (1.18 in) 28 mm 1U-8194 30.25 mm (1.19 in) M30-2
M24-3 246-7519 2 246-7528 5 M33-2 33 mm (1.30 in) 31 mm 33.25 mm (1.31 in) M33-2
1 Use a standard coutersink tool with an angle from 82 to 100 degrees. The diameter listed in the chart is the measuremt at the top of the counterbore. The tolerance for
this diameter is 0 mm (.0 in) + 0.25 mm (.010 in).
Shop Supplies
Used in material thickness of .76 mm to 4.75 mm (.030 to .187 in )
Used to install 8-32 threaded insert
Used with standard hand tools to make repair Reference
Allows convenient field repair of stripped or damaged threads NEHS0677 Tool Operating Manual containing installation instructions
Compact design allows installation of insert in confined areas
Fastener
Threaded Inserts
Part No. Body Diameter Flange Diameter Length Thread
140-9921 9.5 mm (.374 in) 10 mm (.393 in) 14 mm (.551 in) M6 x 1.0
176-1691 6.34 mm (.250 in) 6.83 mm (.269 in) 9.4 mm (.370 in) 8-32
178-1628 9.51 mm (.375 in) 10.2 mm (.400 in) 13.1 mm (.515 in) 1
4-20 ID: C78509T1
ID: C80348T1
Part No. Description Body Diameter Flange Diameter Length Thread Pilot Hole Diameter Grip Range
206-7047 Threaded Insert (M4) 6.73 mm (.265 in) 7.87 mm (.310 in) 10.67 mm (.420 in) M4 x 0.7 6.75 mm (.266 in) 0.50 to 2.00 mm (.020 to .079 in)
206-7048 Threaded Insert (M6) 9.91 mm (.390 in) 11.56 mm (.455 in) 14.73 mm (.580 in) M6 x 1.0 10.00 mm (.294 in) 0.70 to 4.20 mm (.028 to .165 in)
Individual Extractors
Useful in maintenance departments, machine shops, garages, workshops, etc., to remove broken screws,
bolts or other threaded parts
First, drill a hole into the broken part. Insert the extractor. By twisting to the left, the extractor will grip
into the wall of the hole and the broken part can be backed out without damaging threads.
Extractor Sets
For removing broken screws and bolts (eliminates redrilling and retapping for a larger screw)
ID: C44009T1
4C-3383 Extractor Set, Straight Tapered 4C-3382 Extractor Set, Left Hand Spiral 4C-3381 Extractor Set, Left Hand Spiral 4C-5530 Extractor Set, Straight Tapered
To remove bolts, To remove bolts, To remove bolts, To remove bolts,
Part No. screws and pipes: Part No. screws and pipes: Part No. screws and pipes: Part No. screws and pipes:
Shop Supplies
4C-3374 3 in to 516 in 4C-3364 3 in to 532 in 4C-3364 3 in to 532 in 4C-3374 3 in to 516 in
16 32 32 16
4C-3376 7 in and 18 in Pipe 4C-3366 7 in to 932 in 4C-3366 7 in to 932 in 4C-3376 7 in and 18 in Pipe
16 32 32 16
4C-3377 1 in to 916 in and 14 in Pipe 4C-3367 9 in to 38 in and 18 in Pipe 4C-3367 9 in to 38 in and 18 in Pipe 4C-3377 1 in to 916 in and 14 in Pipe
2 32 32 2
4C-3378 5 in and 38 in Pipe 4C-3368 3 in to 58 in and 14 in Pipe 4C-3368 3 in to 58 in and 14 in Pipe 4C-3378 5 in and 38 in Pipe
8 8 8 8
4C-3365 5 in to 732 in
32
4C-3366 7 in to 932 in
32
ID: C44010T1
Originally used for the removal of burner tubes in the D70, D65 Tractors and D9900 Power Units
Used to remove broken screws and bolts
Turn 1 in
Eliminates redrilling and retapping for larger screw 2
Index set not available Part No. Size Part No. Size Part No. Size
135 split point 4C-3335 1
16 in 4C-3345 7
32 in 4C-3355 3
8 in
Self-centering capability 4C-3336 5
64 in 4C-3346 13
64 in 4C-3356 25
64 in
M-7 steel 4C-3337 3
32 in 4C-3347 1
4 in 4C-3357 13
32 in
Excellent for removing broken 4C-3338 7
64 in 4C-3348 17
64 in 4C-3358 27
64 in
studs and fasteners 1 9 7
4C-3339 8 in 4C-3349 32 in 4C-3359 16 in
4C-3340 9 in 4C-3350 19 in 4C-3360 28 in
64 64 64
4C-3344 13 in 4C-3354 23 in
64 64
Extractors are not threaded and thus will accommodate studs with either coarse or fine threads
Saves time when removing a number of studs and eliminates thread damage
Reference
GMG02078 Special Instruction Item Part No. Description
1 2P-5527 Extractor, 34 in
2 2P-5528 Extractor, 78 in
3 2P-5529 Extractor, 1 in
4 2P-5497 Body
5 2P-5538 Bolt
6 2P-5537 Washer
ID: B80755T1
Stud Removers
Shop Supplies
8S-1378 Stud Remover and Resetter Tool Set, 14 through 58 in
8S-1366 Collet 1 in - 28
4
8S-1367 Collet 5 in - 18
16
8S-1368 Collet 5 in - 24
16
8S-1369 Collet 3 in - 16
8
8S-1370 Collet 3 in - 24
8
8S-1371 Collet 7 in - 14
16
8S-1372 Collet 7 in - 20
16
8S-1373 Collet 1 in - 13
2
8S-1375 Collet 9 in - 12
16
8S-1376 Collet 9 in - 18
16
8S-1346 Collet 5 in - 11
8
8S-1364 Box
Not Shown
8S-1374 Collet 1 in - 20
2
8S-1347 Housing
Used to quickly and easily install metric studs (not for stud removal)
Can be used with standard wrench or impact wrench Part No. Size
Reduces possible damage to threads 204-7932 M16 x 2.0
Designed to easily release from stud after installation 204-7933 M20 x 2.5
Ensures reliable bolted joint (reduces chance of stud backout) 204-7934 M24 x 3.0
204-7935 M30 x 3.5
204-7936 M36 x 3.0
ID: C80194T1
Will cut cast iron, stainless steel, high alumina refractory, and slag
Can be used indoors, because the noise and smoke levels are very low
Faster and less expensive than carbon arc and requires oxygen only
Durable, comfortable, and less fatiguing to use
Large squeeze trigger-type handle control delivers oxygen precisely.
Excellent tool for gouging hard facing. Unlike carbon arc,
the rods contain no carbon, thus reducing the grinding requirement.
Shop Supplies
ID: C10294T1
Rod Sizes Used by Mini Cutting Torch Item Part No. Description
General purpose rods for removing small bolts and pins by piercing Included with Mini Cutting Torch
4.76 mm x 55.24 cm (316 in x 2134 in) 1 8T-7792 Mini Cutting Torch
6.35 mm x 55.24 cm (14 in x 2134 in)
2 8T-9110 Washer
Rods for piercing track pins, washing away welds, and gouging hard facing
9.52 mm x 46.67 cm (38 in x 1838 in) 3 8T-7795 Collet, 4.76 mm (38 in)
Cut off and gouging rod for piercing longer pins and rough cutting 4 8T-7794 Collet, 6.35 mm (14 in)
9.52 mm x 91.44 cm (38 in x 36 in) Not shown 8T-9202 Collet, 4.76 mm (316 in)
Not shown 8T-7793 Striker Plate
Not shown 8T-9287 Washer
Purchase separately
5 8T-7697 Rod, 9.52 mm x 914.4 mm (38 in x 36 in)
6 8T-7696 Rod, 6.35 mm x 55.24 cm (14 in x 2134 in)
7 8T-7698 Rod, 4.76 mm x 45.72 cm (38 in x 18 in)
Not shown 8T-9201 Rod, 4.76 mm x 55.24 cm (316 in x 2134 in)
Not shown 8T-7699 Igniter
Not shown 9U-5614 Shield
Not shown 9U-5615 Collet Nut-Brass
Not shown Form SEHS8923
Miscellaneous
References
SEBF8271, Guideline for Reusable Parts
ID: D00290T1
Used to help protect against damage, dirt and moisture contamination, and corrosion during shipping and storage
ID: C79777T1
Shop Supplies
Straight Thread O-Ring Hex Head Plugs
ID: C79465T1 Thread
ID: C79732T1
Size O-ring
ORFS Plugs JIC 37 Plugs Part No. (in - TPI) Seal
A A L A A L 9S-4180 5 - 24 4J-7533
16
Thread Thread Thread Thread 1N-5999 3 - 24 7J-0204
8
Dash Size Length Dash Size Length
9S-4182 7 - 20 3J-7354
Part No. Size (in - TPI) (in) (mm) Part No. Size (in - TPI) (in) (mm) 16
9 7 3K-8460 1 - 20 1J-9671
6V-9507 -4 16 - 18 0.67 17 9S-5518 -4 16 - 20 0.79 20 2
11 1 9S-4191 9 - 18 3J-1907
6V-9508 -6 16 - 16 0.75 19 5P-4996 -5 2 - 20 0.79 20 16
13 9 9S-4185 3 - 16 3K-0360
6V-9509 -8 16 - 16 0.87 22 9S-8927 -6 16 - 18 0.83 21 4
3 9S-4190 7 - 14 2M-9780
6V-9510 -10 1 - 14 1.02 26 5P-2909 -8 4 - 16 0.94 24 8
Straight Thread O-Ring Allen Drive Plugs Pipe Hex Head Plugs Pipe Square Head Plugs
Thread Thread Thread
Size O-ring Size Size
Part No. (in - TPI) Seal Part No. (in - TPI) Part No. (in - TPI)
5 2S-7905 1 - 27 2B-7408 1 - 27
9S-8001 16 - 24 4J-7533 16 8
3 5M-6214 1 - 27 2B-7409 1 - 18
9S-8007 8 - 24 7J-0204 8 4
7 5M-6213 1 - 18 2B-7457 3 - 18
9S-8002 16 - 20 3J-7354 4 8
1 3J-5390 3 - 18 5B-9169 1 - 14
9S-8003 2 - 20 1J-9671 8 2
9 4J-4382 1 - 14 5P-3320 3 - 14
9S-8004 16 - 18 3J-1907 2 4
3 3M-7045 3 - 14 7L-2505 1 - 1112
9S-8005 4 - 16 3K-0360 4
9S-8006 7
8 - 14 2M-9780 090-9019 1 - 1112 068-0710 114 - 1112
9S-8008 1116 - 12 3D-2824 4B-8586 2 - 1112
9S-8009 1316 - 12 4K-1388
9S-9334 1516 - 12 7M-8485
9S-8010 158 - 12 2S-4078
5P-7684 178 - 12 6K-6307
Pipe Square Drive Plugs Pipe Allen Drive Plugs JIS-BSPP Shipping Plugs
Thread Thread JIS-BSPP
Size Size Thread
Part No. (in - TPI) Part No. (in - TPI) Size
7F-9504 1 - 18 4D-0514 1 - 27 Part No. (in - TPI)
4 16
093-1321 1 - 19
4B-4845 3 - 18 9F-2247 1 - 27 4
8 8
096-6073 3 - 19
2B-0858 1 - 14 7H-3171 1 - 18 8
2 4
093-1322 1 - 14
1B-5174 3 3 2
4 - 14 7M-7410 8 - 18
093-1323 3 - 14
3B-0551 1 - 1112 3L-1850 1 - 14 4
2
4 4
Metric Plugs SAE Code 61 Flange Port Cover Caterpillar Flange Port Cover
A Light Heavy L A A A A
Metric Duty Duty Head Flange Head Flange
Thread Tube Tube Size Dash Size Dash
Size O.D. O.D. Length Part No. (in) (mm) Size Part No. (in) (mm) Size
Part No. (dia x pitch) (mm) (mm) (in) (mm) 5H-4017 1.19 30.2 -8 5P-0045 1.25 31.8 -8
105-5211 M12 x 1.5 6 1 0.65 17 5H-4018 1.50 38.1 -12 5P-0046 1.63 41.3 -12
2Y-6462 M14 x 1.5 8 6 0.63 16 5H-4019 1.75 44.5 -16 5P-0047 1.88 47.6 -16
9T-6322 M14 x 1.5 8 6 0.87 22 5H-4020 2.00 50.8 -20 5P-0048 2.12 54.0 -20
2Y-5841 M16 x 1.5 10 8 0.63 16 2J-2668 2.38 60.3 -24 5P-0049 2.50 63.5 -24
2Y-6461 M16 x 1.5 10 8 0.71 18 2J-5608 2.81 71.4 -32 5P-0050 3.13 79.4 -32
8C-4424 M22 x 1.5 14 14 1.06 27
1 Size not available.
ID: D01665T1
To assure a proper fit, dimension E should be approximately .020 in smaller than the opening diameter of the part to be
protected, or dimension A should be approximately .020 in larger than the opening diameter of the part to be protected.
Shop Supplies
Tapered Dual-Function Caps and Plugs
Use as a plug Use as a cap
Pkg. A B C D E F Supplier
Part No. Qty. (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) Part No.
276-0731 250 0.18 5 0.11 3 0.31 8 0.40 10 0.05 1 0.11 3 1 T-0-X
276-0740 250 0.24 6 0.17 4 0.37 10 0.37 10 0.10 3 0.17 4 2 T-1
276-0741 250 0.27 7 0.20 5 0.43 11 0.37 10 0.15 4 0.20 5 4 T-1-X
276-0742 250 0.30 8 0.24 6 0.46 12 0.37 10 0.17 4 0.24 6 5 T-2
276-0743 250 0.33 9 0.26 7 0.46 12 0.37 10 0.20 5 0.27 7 6 T-2-X
276-0744 250 0.36 9 0.30 8 0.53 13 0.37 10 0.23 6 0.30 8 7 T-3
9U-7067 250 0.40 10 0.33 8 0.56 14 0.38 10 0.27 7 0.33 8 8 T-3-X
9U-7068 250 0.43 11 0.36 9 0.59 15 0.38 10 0.30 8 0.37 9 9 T-4
276-0745 250 0.46 12 0.39 10 0.62 16 0.37 10 0.32 8 0.39 10 10 T-4-X
9U-7069 250 0.49 12 0.42 11 0.59 15 0.38 10 0.36 9 0.42 11 11 T-5
276-0746 250 0.51 13 0.44 11 0.62 16 0.40 10 0.38 10 0.44 11 12 T-5-X
9U-7070 250 0.55 14 0.49 12 0.72 18 0.50 13 0.41 10 0.49 12 13 T-6-5
276-0747 250 0.56 14 0.50 13 0.75 19 0.43 11 0.43 11 0.50 13 14 T-6-X
9U-7071 250 0.62 16 0.53 13 0.75 19 0.50 13 0.47 12 0.55 14 16 T-7-X
9U-7072 250 0.63 16 0.55 14 0.78 20 0.50 13 0.49 12 0.57 14 17 T-8
276-0748 250 0.67 17 0.58 15 0.87 22 0.53 13 0.52 13 0.60 15 18 T-8-X
276-0749 250 0.69 18 0.61 15 0.84 21 0.50 13 0.54 14 0.63 16 20 T-9
9U-7073 250 0.73 18 0.64 16 0.88 22 0.50 13 0.58 15 0.67 17 21 T-9-X
9U-7074 250 0.75 19 0.67 17 0.88 22 0.63 16 0.62 16 0.69 18 22 T-10
9U-7075 250 0.79 20 0.69 18 0.94 24 0.63 16 0.63 16 0.72 18 23 T-11
9U-7076 250 0.85 22 0.75 19 1.03 26 0.63 16 0.69 17 0.79 20 27 T-12
9U-7077 250 0.91 23 0.80 20 1.09 28 0.75 19 0.74 19 0.85 21 28 T-12-X
276-0750 250 0.93 24 0.82 21 1.12 29 0.62 15 0.75 19 0.86 22 29 T-13-A
9U-7078 250 0.98 25 0.87 22 1.11 28 0.63 16 0.81 21 0.92 23 31 T-13-X
9U-7079 250 1.04 26 0.90 23 1.16 29 0.75 19 0.83 21 0.98 25 35 T-14
9U-7080 250 1.09 28 0.97 25 1.25 32 0.75 19 0.90 23 1.03 26 40 T-14
9U-7081 250 1.15 29 1.00 25 1.31 33 0.75 19 0.94 24 1.08 27 41 T-14-X
9U-7082 250 1.23 31 1.11 28 1.52 39 0.75 19 1.04 26 1.18 30 42 T-15-X
7E-8716 250 1.29 33 1.18 30 1.44 37 0.75 19 1.11 28 1.22 31 44 T-15-S
276-0751 250 1.35 34 1.22 31 1.50 38 0.75 19 1.16 29 1.29 33 45 T-16
9U-7084 250 1.35 34 1.24 31 1.50 38 0.75 19 1.17 30 1.30 33 46 T-16
276-0752 250 1.45 40 1.29 33 1.62 41 1.00 25 1.22 31 1.39 35 48 T-17
276-0753 250 1.46 37 1.31 33 1.62 41 0.75 19 1.24 32 1.40 36 49 T-17
9U-7085 250 1.60 41 1.45 37 1.75 44 0.75 19 1.39 35 1.54 39 53 T-18
9U-7086 100 1.60 41 1.52 39 1.75 44 0.75 19 1.46 37 1.54 39 54 T-18-X
9U-7087 100 1.68 43 1.56 40 1.88 48 0.75 19 1.50 38 1.62 41 55 T-19
276-0754 100 1.75 44 1.60 41 1.93 49 0.75 19 1.56 40 1.68 43 56 T-19
9U-7088 100 1.88 48 1.75 44 2.03 52 0.75 19 1.69 43 1.82 46 57 T-210
9U-7089 100 1.94 49 1.81 46 2.13 54 1.00 25 1.75 44 1.88 48 58 T-21
276-0755 100 2.02 51 1.84 47 2.12 54 1.00 25 1.78 45 1.93 49 60 T-22-S
276-0756 100 2.16 55 1.98 50 2.25 57 1.00 25 1.91 49 2.11 54 63 T-25-A
276-0757 100 2.25 57 2.06 52 2.43 62 1.03 26 2.00 51 2.17 55 66 T-240
9U-7090 50 2.26 57 2.23 57 2.50 64 0.50 13 2.17 55 2.20 56 68 T-240
Straight Cap
Pkg. A B C D E
ID: D01671T1 Part No. Qty. Material (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm)
217-1591 50 1 1.25 31.65 0.67 17 1 25.22 1.06 26.82 0.05 1.4
Non-threaded Caps
ID: D01677T1
Non-threaded Cap Protectors Non-threaded Cap Protectors
Pkg. Diam. A Length B Pkg. Diam. A Length B
Part No. Qty. Material1 (in) (mm) (in) (mm) Part No. Qty. Material1 (in) (mm) (in) (mm)
9U-7166 250 1 0.13 3 0.63 16 9U-7182 100 1 1.31 33 0.88 22
9U-7167 250 1 0.25 6 0.88 22 9U-7183 100 1 1.38 35 0.88 22
9U-7168 250 1 0.30 7 0.88 22 9U-7184 100 1 1.44 37 0.88 22
9U-7169 250 1 0.38 10 0.88 22 9U-7185 100 1 1.50 38 0.88 22
9U-7170 250 1 0.44 11 0.88 22 9U-7186 100 1 1.63 41 1.00 25
9U-7171 250 1 0.50 13 0.88 22 9U-7187 100 1 1.69 43 0.88 22
9U-7172 250 1 0.56 14 0.88 22 9U-7188 100 1 1.75 44 0.88 22
9U-7173 250 1 0.63 16 0.88 22 9U-7189 100 1 1.88 48 0.88 22
9U-7174 100 1 0.69 17 0.88 22 9U-7190 100 1 2.00 51 0.88 22
9U-7175 100 1 0.75 19 0.88 22 9U-7191 100 1 2.13 54 0.88 22
9U-7176 100 1 0.81 21 0.88 22 9U-7192 100 1 2.38 60 0.88 22
9U-7177 100 1 0.88 22 0.88 22 9U-7193 100 1 2.50 64 0.88 22
9U-7178 100 1 1.00 25 0.75 19 9U-7194 50 1 3.13 79 1.38 35
9U-7179 100 1 1.06 27 0.88 22 1 1 - Grade 1 Virgin Polyethylene
9U-7180 100 1 1.19 30 1.00 25 2 - Low Density Polyethylene
3 - High Density Polyethylene
9U-7181 100 1 1.25 32 0.88 22
Threaded Caps
Metric Threaded Cap Protectors
Metric
Thread
Pkg. Size A B C
Part No. Qty. Material1 (dia x pitch) (in) (mm) (in) (mm) (in) (mm)
9U-7145 100 2 M10 x 1.0 0.39 10 0.54 14 0.29 8
9U-7146 100 2 M12 x 1.5 0.47 12 0.62 16 0.37 10
9U-7147 100 2 M14 x 1.5 0.47 12 0.70 18 0.37 10
9U-7148 100 2 M16 x 1.5 0.47 12 0.78 20 0.37 10
9U-7149 100 2 M18 x 1.5 0.55 14 0.85 22 0.45 12
9U-7150 100 2 M20 x 1.5 0.55 14 0.92 24 0.37 10
9U-7151 50 2 M22 x 1.5 0.54 14 1.02 26 0.45 12
9U-7152 50 2 M24 x 1.5 0.55 14 1.14 29 0.45 12
9U-7153 50 2 M26 x 1.5 0.55 14 1.18 30 0.45 12
ID: D01227T1 1 1 - Grade 1 Virgin Polyethylene 2 - Low Density Polyethylene 3 - High Density Polyethylene
Shop Supplies
Metric Threaded Plug Protectors
Metric
Thread
Pkg. Size A B C
Part No. Qty. Material1 (dia x pitch) (in) (mm) (in) (mm) (in) (mm)
9U-7136 100 2 M10 x 1.0 0.57 15 0.60 15 0.41 10
9U-7137 100 2 M12 x 1.0 0.66 17 0.73 19 0.42 11
9U-7138 50 2 M14 x 1.5 0.68 17 0.73 19 0.37 10
9U-7139 50 2 M16 x 1.5 0.68 17 0.87 22 0.50 13
9U-7140 50 2 M18 x 1.5 0.72 18 0.96 24 0.54 14
9U-7141 50 2 M20 x 1.5 0.72 18 1.04 26 0.55 14
9U-7142 50 2 M22 x 1.5 0.72 18 1.11 28 0.54 14
9U-7143 50 2 M24 x 1.5 0.73 19 1.23 31 0.54 14
9U-7144 50 2 M26 x 1.5 0.73 19 1.46 37 0.54 14
1 1 - Grade 1 Virgin Polyethylene 2 - Low Density Polyethylene 3 - High Density Polyethylene
ID: D01689T1
Shop Supplies
9U-7133 100 1 11116 - 12 21-TS 0.83 21 1.67 42
9U-7134 100 1 178 - 12 24-TS 0.95 24 1.87 48
9U-7135 50 1 212 - 12 32-TS 1.20 30 2.49 63
1 1 - Grade 1 Virgin Polyethylene
2 - Low Density Polyethylene
3 - High Density Polyethylene
SAE Code Flange 61 Bolted Protectors SAE Code 62 and Caterpillar Flange Bolted Protectors
Thread Thread
Pkg. Size Pkg. Size
Part No. Qty. Material1 (in - TPI) Part No. Qty. Material1 (in - TPI)
9U-7154 25 1 1 NPT 9U-7161 25 1 3 NPT
2 4
9U-7155 25 1 3
4 NPT 9U-7162 25 1 1 NPT
9U-7156 25 1 1 NPT 9U-7163 25 1 114 NPT
9U-7157 25 1 114 NPT 9U-7164 25 1 112 NPT
9U-7158 25 1 112 NPT 9U-7165 25 1 2 NPT
9U-7159 25 1 2 NPT 1 - Grade 1 Virgin Polyethylene
9U-7160 25 1 212 NPT 2 - Low Density Polyethylene
3 - High Density Polyethylene
1 - Grade 1 Virgin Polyethylene
2 - Low Density Polyethylene
3 - High Density Polyethylene
Vises
Vises
Tradesman Vises
Warranty: Manufacturers
Replaceable, hardened steel serrated jaw inserts and replaceable pipe jaws
Precision, machined keyed slide bar
Built for maximum quality and performance
Straight line design means no wear on spindle or nut
360 swivel base, double lockdowns
Side play eliminated by precision machined slide bar keyed for precision
Fully enclosed design keeps dirt and contaminants out
Shop Supplies
ID: C33302T1
Replacement Parts for Non Current Vises
Replacement
Replacement
Cat Jaw Pipe Throat Max. Shipping Replacement Pipe Jaw
Cat Jaw Replacement Pipe Jaw
Part No. Width Capacity Depth Opening Weight Jaw Insert Kits Inserts
Part No. Width Jaw Insert Inserts
233-8145 4 in 1 in-2 in 3716 in 412 in 37 lb 236-2646 236-2654
4
188-2143 412 in 188-2165 4C-4400
233-8146 5 in 1 in-212 in 334 in 514 in 50 lb 236-2647 236-2655
4
188-2145 512 in 188-2167 4C-4400
233-8147 6 in 1 in-312 in 418 in 534 in 64 lb 236-2648 236-2656
4
188-2147 612 in 188-2170 4C-4400
188-2163 8 in 1 in-312 in 434 in 7 in 109 lb 188-2171 188-2752
8
4C-3741 4 in 4C-4391 4C-4400
4C-3742 5 in 4C-4392 4C-4400
4C-3743 6 in 4C-4393 4C-4400
Machinist Vises
Warranty: Manufacturers
Wilton
Cat Part Jaw Throat Max. Shipping Replacement
Part No. No. Width Depth Opening Weight Jaw Inserts
4C-3751 350S 312 in 234 in 514 in 46 lb 4C-4397
4C-3752 400S 4 in 312 in 612 in 66 lb 4C-4398
ID: C33303T1
4C-3753 450S 412 in 4316 in 712 in 73 lb 4C-4394
4C-3754 500S 5 in 414 in 8 in 97 lb 4C-4399
Vises
ID: C41330T1
Shop Supplies
Part No. Width other with same jaw width:
4C-6830 4 in 4C-3741, 4C-3752
4C-6831 412 in 4C-3753, 4C-3744
4C-6832 5 in 4C-3742, 4C-3754, 4C-3745
4C-6833 6 in 4C-3743, 4C-3746
ID: C41331T1
Jaw construction includes a 120 horizontal Vee-Groove, 3 vertical Vee-Grooves and a 90 groove for marking out and center punching
Ideal for light tapping and thread cutting applications
Capable of clamping a block of material in a vise to be utilized as a surface plate for light duty work
Jaw caps sold separately
ID: C41332T1
ID: C41333T1
Jaw Caps
Designed to avoid marring the surface of softer metals and to protect jaw faces
Made to fit any size vise
Polished faces and pliable copper extensions for a sure-grip fit on any make vise
ID: C33305T1
Vises
Mounts on workbench
Use to secure components during assembly and disassembly
Capable of holding small transmissions, differentials, hydraulic pumps,
water pumps and electrical components
Capacity 250 lb
Shop Supplies
ID: 57495T1
Each battery accepts the charge it requires, depending on its size, state of charge,
and temperature; the initial high charge rates taper down to a safe finishing level
No moving parts little maintenance
Isolated transformer for safety
Heavy-duty diode rectifier with deep reserve capacity
Circuit breaker protection
Mounts on wall or bench
UL listed
Shop Supplies
ID: C33374T1
DC charging leads 10 pair, 10 gauge, 914.4 mm (36 in) long with 300 Amp insulated safety clamps
Insulated storage bars and connections ensure there are no live electrical connections
3-shelf rack stores up to 12 batteries
Durable 3 mm (18 in) polypropylene sheet protects shelves from damage
Acid resistant resists scratching and chipping
Convenient snap together heavy-gauge steel construction
ID: C44065T1
Parallel charging 10 battery capacity use one bus bar or combine several for added capacity
Insulated fiberglass backboard
DC charging leads 10 pair, 10 gauge, 914.4 mm (36 in) long with 300 Amp insulated safety clamps
.9 m (3 ft) 4 AWG cables included to connect to charger or additional bus bars
ID: C33378T1
ID: C79699T1
UL UL
Continuous Cranking UL Boost
Input Ratings Assist Rate Rate AC DC Clamp Wt.
Part. No. Volt (Amps) (Amps) (Amps) Cord Leads Rating Volt kg lbs
4C-4920 110 100/70 300 550 10 ft 14-3 8 ft 4AWG 500A 6/12 26.3 58
4C-4921 110 100/75/50/40 300 600 10 ft 14-3 8 ft 4AWG 500A 6/12/18/24 31.7 70
4C-4910 220 100/75/50/40 300 600 10 ft 14-3 8 ft 4AWG 500A 6/12/18/24 31.7 70
Charges all standard and maintenance-free batteries with four charging positions
Heavy-duty chrome plated handles
Fan cooled
UL and CSA listed for indoor/outdoor use
ID: D01605T1
UL Continuous UL Cranking UL Boost
Ratings Assist Rate Rate AC DC Clamp Weight
Part. No. (Amps) (Amps) (Amps) Cord Leads Rating Volt kg lbs
4C-4924 70/60 230 420 612 ft 16-3 7 ft 4AWG 500A 6/12 17.2 38
4C-4925 40/10/2 132 250 612 ft 16-3 6 ft 8AWG 200A 6/12 11.8 26
ID: C80276T1
Shop Supplies
Cables
Warranty: Manufacturers
ID: C44332T1
Booster Cables
Warranty: Manufacturers
Professional quality
Ensure quick and efficient connections
Designed for convenience and safety
ID: C33385T1
Side Approx.
Cir. Mil. Amp Terminal Individual
Part No. Length Gauge Copper Jacket Clamp Adapters Weight
4C-4933 3.66 m (12 ft) 4 AWG 37,360 PVC 500E yes 2.7 kg (6 lbs)
4C-4934 1 3.66 m (12 ft) 4 AWG 32,900 T-94 500E yes 3.6 kg (8 lbs)
4C-4935 4.8768 m (16 ft) 4 AWG 37,360 PVC 500E yes 3.6 kg (8 lbs)
4C-4936 6 m (20 ft) 4 AWG 37,360 PVC 500E yes 4.1 kg (9 lbs)
300-5899 6 m (20 ft) 2 AWG 62,450 PVC 600P yes 6.4 kg (14 lbs)
4C-4938 4.572 m (15 ft) 1/0 AWG 106,400 T-94 800 no 7.3 kg (16 lbs)
1 Equipped with stop/go light red L.E.D.s warn operator if polarity is reversed
Replacement Clamps
Warranty: Manufacturers
Professional quality clamps for all booster cables, chargers and testers
Package: 1 pair per see-through display carton
ID: C33389T1
ID: C33388T1
Alternative to cabinet style socket stainless steel plate mounts flush on service vehicle
Same features as power socket included in 4C-4929
For a complete starting system, order 4C-4931 and 4C-4944 Plug-In Cables
ID: C33383T1
Power Socket
New stainless steel cabinet resists corrosion
Polarized socket with solid copper contacts
1.5 m (5 ft) connecting cables for service battery hook-up (4 AWG)
Plug-In Cables
Army/Navy Lexan plug wont break in coldest weather
Heavy-duty cables, 7.62 m (25 ft) 4 AWG. Jacket resists oil
and abrasion stays flexible to 4.4C (-40F) ID: C80220T1
500 Amp insulated clamps with Flexi-Spring cable guards
Service Parts
Part No. Description
Patented Safety Light
Warns operator before a reversed connection is made 4C-4943 Power Socket with battery cable
Side terminal adapters grip hard-to-reach side terminals 4C-4946 Polarized Lexan Plug, .45 kg (1 lb)
Weight: 7.7 kg (17 lbs) 4C-4945 Power Socket only
4C-4944 Plug-in Cable (includes clamps)
Power Socket
New stainless steel cabinet resists corrosion
Polarized socket with solid copper contacts
1.5 m (5 ft) connecting cables for service battery hook-up (1 AWG)
Plug-In Cables
Army/Navy Lexan plug wont break in coldest weather
Heavy-duty cables, 7.62 m (25 ft) 1 AWG. Jacket resists oil and abrasion stays flexible to 4.4C (-40F)
800 Amp insulated clamps with Flexi-Spring cable guards
Shop Supplies
Service Parts
Part No. Description
4C-9917 Power Socket with battery cable ID: C33384T1
Vehicular Caterpillar
Batteries and Worklights
An enveloped Negative Plate protects against shorts. power washing no vent caps falling off. Side brickwork and waffle design
on bottom of the case resist punctures. Raised Caterpillar Part Number and
descriptors wont wear off and provide for easy and accurate replacement
by technicians.
ID: D01579T1
ID: D00288T1
Vehicular Caterpillar
Batteries and Worklights
Shop Supplies
RVs, school buses. Also for applications with extensive
idle or use of in-cab accessories. 3+1 and 4+0 systems GP31 175-4360 710 185
Ideal general purpose starting/cycling battery for applications
that include long hauls, local runs, and light-duty cycling/
key-off accessory usage GP31 175-4370 825 190
Ideal starting battery. Industrys highest CCA rating.
Over-the-road applications where starts are infrequent
and battery cycling is limited GP31 175-4390 1000 180
Cat Batteries for Recreational and Automotive Use - Premium High Output
Maintenance-free design
Designed by Caterpillar to meet demanding performance tests 100-hour vibration tested (5 times the industry standard)
Calcium lead alloy on both positive and negative plates for minimal water loss
72- and 36-month prorated warranties (see dealer for details)
Highest CCAs in the industry for deep cycle applications
ID: D01585T1
ID: D01591T1
Vehicular Caterpillar
Batteries and Worklights
Floodlights
Economically priced 3 inch x 3 inch halogen floodlights for use in a wide range
of on-highway truck and recreational vehicle applicationsback-of-cab floodlight
next to the trailer hookup, floodlights inside cargo trailers, floodlights to illuminate
the work site for construction, mixer, and farm trucks
Available in wide- and long-range floodlight patterns
Advanced optical reflector provides light output approaching 5 inch x 5 inch lights
Vertical and suspended mounts with swivel capability (mounting bracket included)
24-Volt (65-watt) or 12-Volt (55-watt)
Halogen bulb serviced with only a screwdriver
Easy to install using sturdy, integral (mounted-in-housing) DT (Deutsch) connectors
Excellent vibration, temperature and moisture resistance for longer life (environmentally
sealedlights must pass Caterpillar design specifications for resistance to water spray,
water dunk, and vibration)
Shop Supplies
ID: D00106T1
For people on-the-go, can be carried on the hip in its own nylon belt holster
534 inches long
Includes two AA batteries
ID: D00101T1
High quality
Designed and manufactured in the U.S.A.
Shop Supplies
Precision machined, high strength aluminum exterior components
Anodized internally and externally for optimum corrosion resistance
Water resistant O-ring seals throughout protecting an internal self-actuating switch
Hi-impact, scratch resistant Lexan lens
Fast action Linear-Focusing flood-to-spot beam with a twist of the wrist
Extra long lamp life, equivalent of 3 or 4 sets of batteries
Approximately 5 to 6 hours operating time per set of batteries
Ambient candle mode for hands free operation
Spare lamp in tail cap ID: C41348T1
Includes two AA size alkaline batteries (4C-9463), available worldwide
All flashlights have Cat logo
Item Part No. Description Length Batteries
1 1U-7321 Flashlight 254 mm (10 in) long 2 D cell batteries (replacement lamp 4C-9464)
2 1U-7322 Flashlight 310 mm (12316 in) long 3 D cell batteries (replacement lamp 4C-9465)
3 4C-9442 Flashlight 375 mm (1434 in) long 4 D cell batteries (replacement lamp 4C-9466)
Accessories (Warranty: Six Months)
4 4C-9446 Black, nylon, full flap holster for discontinued 1U-7323
5 4C-9447 Black, leather holster for discontinued 1U-7323
6 4C-9448 Mounting Clamp kit for all D cell flashlights, 2 clamps and screws
Heavy-Duty Flashlights
Warranty: Manufacturers
ID: C44286T1
Shop Supplies
Flashlight Bulbs
Warranty: Manufacturers
Part No. Description Application
Ultra high intensity Krypton 4C-9464 Bulb 2 cell C and D flashlights
Use for increased brightness and visiblility 4C-9465 Bulb 3 cell C and D flashlights
Built with integral lens providing an even distribution of light with excellent focusing characteristics 4C-9466 Bulb 4 cell C and D flashlights
Use with alkaline batteries for best economy Special Flashlight Bulbs
4C-9463 Mini MagLite (Qty. 2)
4C-9470 Mag Charg Rechargeable Flashlight
4C-6741 Lamp Module (Qty. 12)
Industrial Batteries
Warranty: Manufacturers
Pkg. Pkg.
Alkaline Size Alkaline Qty. Heavy-Duty Qty.
Top-of-the-line for maximum C, 1.5 Volt 1U-9531 72 1U-9536 72
service life D, 1.5 Volt 1U-9532 72 1U-9537 72
Best for use in high-drain, AA, 1.5 Volt 1U-9533 96 1U-9538 96
continuous use situations
9 Volt 1U-9534 72 1U-9539 72
AAA, 1.5 Volt 1U-9535 96
Heavy-Duty
Ideally suited for normal AAAA, 1.5 Volt 245-3224 6
industrial use
ID: D00690T1
Shop Supplies
261-0022 Hi-Energy Battery Charger
Warranty: Manufacturers
Charges one to four AA or AAA NiMH batteries in 30 minutes (up to 1850 mAh)
Smart Charger individually monitors cell condition and terminates charging current when charged
Includes Trickle Charge low rate charge to retain charge level that would otherwise be lost due
to self-discharge and storage
Illuminated LED monitoring lights
Ideal for high-drain applications
DC input 11-16V, 3A (AC adapter included)
Should not be used to charge any other battery type other than NiMH
Only charges one size of battery at a time (do not mix AA and AAA in same charge)
Charge capacity
one to four AA NiMH batteries up to 2100 mAh
ID: D01245T1
one to four AAA NiMH batteries up to 750 mAh
Charging current
AA (1-4 cells) 4 amps
AAA (1-4 cells) 1.5 amps
Trickle charge
AA 50 mA
AAA 50 mA
Charging time 30 minutes (up to 1850 mAh)
AC input 110 Volts
ID: D01377T1
ID: D01383T1
Shop Supplies
Lantern Battery
Warranty: Manufacturers
Pkg.
Part No. Description Qty.
1U-9547 Lantern Battery, Spring Terminal, 6 Volt 12
ID: D00696T1
ID: C34488T1
Shop Supplies
ID: C34486T1
ID: C44285T1
ID: C44293T1
ID: C41469T1
110V kit which inludes 13 Watt lamp, outer tube, switch assembly and installation instructions
Install onto any Saf-T-Lite reel or cordset which was originally equipped with a 110V/13 Watt
Stubby light head, such as 4C-6477, 4C-6478 or 4C-6479
Replacement Parts
Part No. Description
9U-6009 Fluorescent Lamp, 110V/13 Watt
9U-6708 Clear Outer Tube ID: C54473T1
120 Volt/60 Hz light made from yellow, unbreakable aerospace plastic with
a 10 amp tool-tap-plug
10,000 hour life, 13 Watt rough-service fluorescent bulb delivers output
of a 60 Watt incandescent bulb
Cord is 7.62 m (25 ft) long, made from 16/3 wire
STOW type cord used for heavy duty service and with oil-resistant, thermoplastic jacket,
is weather resistant for outdoor use
Two year warranty on workmanship and material defects (not including bulb)
179-7044 Bulb and 179-7045 Lens also sold separately
Handy magnetic base so you can position the light where you need it ID: C79853T1
UL Approved
120 Volt/60 Hz light (yellow) includes shatter/scratch resistant lens, 10 amp tool-tap-plug, and velcro magnet
10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60 Watt incandescent bulb
Black reel made from shatter resistant ABS plastic
Cord is 15.2 m (50 ft) long, made from 16/3 wire
STOW type cord used for heavy duty service and with oil-resistant, thermoplastic jacket,
is weather resistant for outdoor use
Two year warranty on workmanship and material defects (not including bulb)
179-7048 Lens, 179-7049 Bulb, and 179-7050 Velcro Magnet also sold separately
UL Approved
ID: C79854T1
120 Volt/60 Hz light includes shatter/scratch resistant lens, 10 amp tool-tap-plug, and velcro magnet
10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60 Watt incandescent bulb
Yellow case is made from unbreakable aerospace plastic
Cord is 7.62 m (25 ft) long, made from 16/3 wire
STOW type cord Used for heavy duty service and with oil-resistant, thermoplastic jacket,
is weather resistant for outdoor use
Two year warranty on workmanship and material defects (not including bulb)
179-7048 Lens, 179-7049 Bulb, and 179-7050 Velcro Magnet also sold separately
UL Approved
ID: C79855T1
120 Volt/60 Hz reel extension cord is 15.2 m (50 ft) long, made from 16/3 wire
with a built-in 10 amp circuit breaker
Case is made from shatter resistant ABS plastic
Two year warranty on workmanship and material defects
UL Approved
ID: C79856T1
Shop Supplies
179-7054 Light Rover
Warranty: Manufacturers
120 Volt/60 Hz light has large, shock-absorbent, easy-grip end caps and a scratch/shatter resistant lens
10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60 Watt incandescent bulb
Unique plug base converts any extension cord into a light
Two year warranty on workmanship and material defects (not including bulb)
179-7049 Bulb and 179-7055 Tube Assembly also sold separately
UL Approved
ID: C79857T1
120 Volt/60 Hz light includes large, shock-absorbent, easy-grip end caps, and a scratch/shatter resistant lens
15 Watt rough service fluorescent bulb delivers output of an 80 Watt incandescent bulb
Cord is 7.62 m (25 ft) long, made from 18/2 wire
STOW type cord Used for heavy duty service and with oil-resistant, thermoplastic jacket,
is weather resistant for outdoor use
Two year warranty on workmanship and material defects (not including bulb)
179-7057 Lens and 179-7058 Bulb also sold separately
UL Approved
ID: C79858T1
ID: C79360T1
Shop Supplies
9U-6369 20 Amp, 250V AC Plug 2 Pole, 3 Wire, NEMA 6-20P
ID: C66955T1
Heavy-Duty Connectors and Plugs (20-30 Amps) with Insulating Cord Grip
Part No. Type Description Cord Diameter
9U-6374 20 Amp, 125/250V Connector Yellow High Impact, with Insulating Cord Grip 14.27 - 26.97 mm (.562 in - 1.062 in)
9U-6375 20 Amp, 125/250V Plug Yellow High Impact, with Insulating Cord Grip 14.27 - 26.97 mm (.562 in - 1.062 in)
9U-6376 20 Amp, 250V Connector Yellow High Impact, with Insulating Cord Grip 14.27 - 26.97 mm (.562 in - 1.062 in)
9U-6377 20 Amp, 250V Plug Yellow High Impact, with Insulating Cord Grip 14.27 - 26.97 mm (.562 in - 1.062 in)
9U-6378 30 Amp, 125V Connector Yellow High Impact, with Insulating Cord Grip 15.875 - 28.575 mm (.625 in - 1.125 in)
9U-6379 30 Amp, 125V Plug Yellow High Impact, with Insulating Cord Grip 15.875 - 28.575 mm (.625 in - 1.125 in)
9U-6380 30 Amp, 250V Connector Yellow High Impact, with Insulating Cord Grip 15.875 - 28.575 mm (.625 in - 1.125 in)
9U-6381 30 Amp, 250V Plug Yellow High Impact, with Insulating Cord Grip 15.875 - 28.575 mm (.625 in - 1.125 in)
ID: C55023T1
Miscellaneous
Linerless rubber tape, 19 mm (34 in) wide X .8 mm (.030 in) thick X 4.6 m (15 ft) long rolls
Use for insulating and sealing on electrical cable installation and repair
1 roll per package
Shop Supplies
ID: C34419T1
Crimping Tools
ID: D01573T1
Part No. Expanded I.D. Recovered I.D. Recovered Length Pkg Qty.
4C-6387 10 mm (.400 in) 3.8 mm (.150 in) 152 mm (6 in) 25
4C-6388 20 mm (.800 in) 5.0 mm (.200 in) 152 mm (6 in) 5 ID: C34420T1
4C-6389 28 mm (1.10) 9.4 mm (.370 in) 229 mm (9 in) 5
4C-6390 388 mm (1.50 in) 12.7 mm (.470 in) 229 mm (9 in) 5
4C-6391 51 mm (2.00 in) 16.5 mm (.650 in) 229 mm (9 in) 1
Barrel Pkg
Part No. Wire L I.D. Color Qty.
4C-6394 #22 to 18 AWG .28 .062 Red 100
Shop Supplies
ID: D01341T1
4C-6395 #16 to 14 AWG .30 .095 Blue 100
4C-6396 #12 to 10 AWG .38 .142 Yellow 100
Application Procedure
1. Slip correct size cold shrink insulator over cable to be spliced.
2. Splice the cable.
3. Unwind the expander core by pulling the insulator over the splice and center.
4. Pull expander core from the cold shrink tubing. Insulator will seal splice.
Relaxed Pkg.
Part No. Diameter Min. Tube Max. Length Qty.
4C-6382 2.54 mm (.10 in) 21.65 mm (.82 in) 203 mm (8 in) 1
4C-6383 10.56 mm (.40 in) 21.65 mm (.82 in) 203 mm (8 in) 1
4C-6384 12.95 mm (.51 in) 25.4 mm (1.00 in) 229.0 mm (9 in) 1
4C-6385 17.53 mm (.69 in) 33.0 mm (1.30 in) 304.8 mm (12 in) 1
4C-6386 24.13 mm (.95 in) 48.26 mm (1.90 in) 304.8 mm (12 in) 1
ID: C44101T1
First Aid
Small, portable kits for service trucks, tool boxes, or for personal use in family home, car, camper, or boat
Soft shell case made of water resistant nylon
Uses Book Style construction with zippered internal compartments (makes it easy to access items)
Shop Supplies
ID: C78540T1
163-0798 163-0799
Contents 25-person 50-person
Adhesive Strips, 34 in x 3 in 50 100
Adhesive Tape Roll, 12 in x 5 yd 1 1
Alcohol Wipes 10 20
Ammonia Inhalants 3 3
Instant Cold Pack 1 1
Combine Pad, 5 in x 9 in 1 1
Shop Supplies
Sterile Cotton, 12 oz roll 1 1
Disposable Gloves 1 pr 2 pr
Eye Irrigate Solution, 1 oz bottle 1 1
Eye Pads, oval, 1.75 in x 2.5 in 2 4
Gauze Pads, 4 in 2 4
Gauze Pads, 3 in 4 8
First Aid Cream, 78 oz 1 2
Sting Relief Pads 3 3
Triangular Bandage 1 1
Gauze Bandage, 2 in x 5 yd 2 2
Gauze Bandage, 4 in x 5 yd 1
Elastic Bandage, 2 in 1
Scissors 1 1
Tweezers 1 1
ID: C44240T1
Disposable Plugs
ID: D01161T1
237-8092 Corded Disposable Foam Plugs Rad Band and Replacement Plugs
Consists of
Package
Part No. Description Quantity
Shop Supplies
233-8580 Glasses 1
ID: D00268T1 ID: D00256T1
233-8587 Ear Muffs 1
ID: C80270T1
ID: D00184T1
ID: C80266T1
Replacement Filters
236-6598 Organic Vapor Cartridge
Provides respiratory protection from certain organic vapors at concentrations
up to 10 times the Permissible Exposure Limit (PEL) with half facepieces ID: D00282T1
Package quantity: ten 2-packs of filters
295-2853 Polypropylene Respirator Cartridge, 412 inch diameter
Shop Supplies
Adjustable metal nose bridge, single strap, and contour-fit design 51 mm x 108 mm (2 in x 414 in), shade 10 lens
to ensure best coverage Ratcheting headgear adjusts to fit any head size
Lightweight and disposable Nylon material is lightweight and durable
Non-irritating to the skin
Not NIOSH approved
Material: polyester
Quantity: 50 per box
ID: D01209T1
ID: C34434T1
Features a shade 10 lens but in a larger size 114 mm x 133 mm (412 in x 514 in)
Has ratcheting head gear
Replacement Lens for 1U-8097 and 1U-8100 Welding Helmets
Made of sturdy nylon material
Lens
Part No. Type Use For:
1U-8098 Shade 5 Tinted Glass1 1U-8097
1U-8209 Shade 10 Tinted Glass2 1U-8097
1U-8101 Shade 10 Tinted Glass2 1U-8100
1U-8099 Plastic Cover Plates3 1U-8097
1U-8102 Plastic Cover Plates3 1U-8100
1 Shade5 lens used for medium to heavy gas torch cutting [25 mm (1 in)
and up] and light to medium gas torch welding [up to 13 mm (12 in)] ID: C44003T1
2 Shade 10 lens used for welding with manual weld electrodes
3 Two needed, one inside and one outside of your tinted glass lens
Shop Supplies
1U-8103 Welding Goggles 1U-8104 Welding Goggles
with Lift Front Lens
Feature a shade 5 lens, good ventilation, and a light-tight fit
Feature the shade 5 lens with
a hinged front-lift door
Shade 5 lens eye goggles that conform to eye area assuring tight and safe seal
Feature anti-fog ventilation
Replacement Lens for 1U-8105 Eye Cup Welding Goggles
Part No. Description
1U-8106 Shade 5 tinted replacement lens1
1U-8107 Clear replacement lens
1 Shade 5 lens used for medium to heavy gas torch
cutting [25 mm (1 in) and up] and light to medium
gas torch welding [up to 13 mm (12 in)]
ID: C41321T1
Welding Jacket
Made of flame resistant, sturdy 269 g (9 oz) sateen fabric treated for permanent fire retardant
Finished in a dark green color
Lightweight and provides excellent protection from flash, flame, and sparks
Black no-glare snaps
Adjustable snaps at the cuff
Part No. Description Size
Roll collar can be turned up
1U-6586 Welding Jacket Large
Flame retardant good up to 50 washes in mild soap
1U-6587 Welding Jacket Extra Large
ID: C41311T1
ID: C41312T1
Shop Supplies
ID: C41307T1
Welding Blanket
Warranty: Manufacturers
ID: C44239T1
ID: D00274T1
Safety Glasses
Shop Supplies
Polycarbonate lens Pkg. Lens Frame Lens
Part No. Qty. Type Color Size Features
Universal bridge, plastic frame
4C-8093 10 Clear Mocha 54 Eyebrow and sideshield
Meet ANSI Z87.1-1979
4C-4120 10 Clear Mocha 58 Eyebrow and sideshield
4C-8351 10 Gray Mocha 58 Eyebrow and sideshield
ID: C41217T1
Safety Glasses
Lens
Part No. Type
European Union Compliant, CE marked 233-8576 Clear (packaged for retail)
Sporty wraparound look 233-8577 Clear
Soft non-slip rubber nosepiece 233-8578 Gray (packaged for retail)
Adjustable temple length 233-8579 Gray
Full UVA and UVB protection
Meets or exceeds all ANSI, CSA, and CE specifications
Package quantity: 1
ID: D00190T1
Safety Glasses
Safety Glasses
ID: D00673T1
ID: D01611T1
Shop Supplies
139-2648 Black Gray
Made in USA 139-2650 Yellow/Black Mirror Gray
Clear tint for indoor applications; gray and mirror gray tint 139-2651 Black Mirror Gray
for outdoor applications where sunlight and glare cause eye strain Replacement Lens
Universal nose bridge Part No. Lens Tint
139-2670 Clear
NOTE: Mirror gray lens coated for scratch resistance only. 139-2671 Gray
139-2672 Mirror Gray
ID: D00619T1
ID: D00667T1
ID: D00196T1
ID: D00292T1
ID: D01263T1
Hard Hats
Warranty: Manufacturers
Shop Supplies
239-4967 Hard Hat, Yellow European Version (EN standard)
ID: C44021T1
ID: C80586T1
Shop Supplies
ID: C41220T1
Safety Vests
Tyvek Coveralls
Shop Supplies
ID: D00697T1
Made with a 0.35 mm (.014 in) PVC exterior laminated to a polyester interior
[PVC is a synthetic thermoplastic elastomer (TPE) which provides excellent ozone and weather resistance]
Double-lapped heat-welded construction
Non-conductive hardware
Meets California Proposition 65
Rain Jacket
Yellow rain jacket with a detachable hood and two patch pockets
Full snap front
Inner storm fly prevents rain and debris from penetrating front opening
Corduroy collar
Raglan sleeves for maximum mobility (a raglan sleeve is attached to a garment body
at a 45 degree angle helping it to stretch from neckline to underarm)
Take-up snaps at cuff
Back yoke ventilation
Rain Pants
Yellow rain pants with fly front overall and pockets with flaps
Fabric/elastic suspender and elastic waist band
ID: D00790T1
Take-up snaps at ankle
Rain Jacket
Part No. Chest Size
263-0876 Medium, 101.6-106.68 cm (40-42 in)
263-0888 Large, 111.76-116.84 cm (44-46 in)
263-0967 XLarge, 121.92-127 cm (48-50 in)
Rain Pants
Part No. Waist Size
263-0875 Medium, 91.44-96.52 cm (36-38 in)
263-0882 Large, 101.6-106.68 cm (40-42 in)
263-0895 XLarge, 111.76-116.84 cm (44-46 in)
Utility Gloves
Warranty: Manufacturers
Help protect from heat, cold, nicks, cuts, and bruises Part No. Size
Split-palm design ensures long life in high-wear areas 276-0491 Medium
Hidden seam design eliminates snagging 276-0492 Large
Tough spandex top material resists snags 276-0493 Extra Large
Snug, comfort fit assures greater dexterity 276-0494 XX Large
NOT flame-proof or fire retardant
Machine washable, air dry (Do NOT machine dry)
6 pair per package
Shop Supplies
ID: D01237T1
Impact Gloves
Warranty: Manufacturers
ID: D01231T1
Insulated Gloves
Warranty: Manufacturers
ID: D01225T1
Fingerless Gloves
Warranty: Manufacturers
ID: D01219T1
Shop Supplies
ID: D00832T1
246-5151 Medium Single Pair
246-5149 Large Single Pair
246-5147 Extra Large Single Pair
246-5152 Medium Bulk - 12 Pair
246-5150 Large Bulk - 12 Pair
246-5148 Extra Large Bulk - 12 Pair
ID: D00844T1
Part No. Size Quantity Part No. Size Quantity
246-5153 Large Single Pair 246-5155 Large Single Pair
ID: D00850T1
246-5154 Large Bulk - 12 pair 246-5156 Large Bulk - 12 Pair
ID: D01155T1
Jersey Gloves
ID: D00874T1
NOTE: When using gloves as Personal Protection Equipment (PPE), always consult the Material
Safety Data Sheet (MSDS) for the chemical that is being handled for the most appropriate glove.
Shop Supplies
Oils, Grease, Degreasing Stoddard Solvent, Potassium
Better protection than Hydroxide, Perchloroethylene,
4C-5522 due to thickness. Phosphoric Acid
ID: D00904T1
ID: D00892T1
4C-5527 Neox Gloves with Neoprene Coating
NOTE: When using gloves as Personal Protection Equipment (PPE), always consult the
Material Safety Data Sheet (MSDS) for the chemical that is being handled for the most appropriate glove.
NOTE: When using gloves as Personal Protection Equipment (PPE), always consult the
Material Safety Data Sheet (MSDS) for the chemical that is being handled for the most appropriate glove.
ID: D00922T1
ID: D00928T1
Personal/Safety Padlocks
Padlocks
Cat part number engraved on side of padlock Cat part number engraved on back of padlock
Shop Supplies
ID: D01906T1 ID: D01912T1
285-1147 High Security Brass Padlock 285-1148 High Security Brass Padlock
Lock body and shackle black with Cat logo Lock body and shackle black with
on both sides of bumper, Cat part number Cat logo on both sides of bumper,
on side of bumper Cat part number on side of bumper
285-1149 High Security Brass Padlock 285-1150 High Security Brass Padlock
Lock body and shackle black with Cat logo Lock body and shackle black with Cat logo on both sides of bumper,
on both sides of bumper, Cat part number Cat part number on side of bumper
on side of bumper
Pin tumbers 5
Body width 44.45 mm (134 in)
Shackle diameter 7.14 mm (932 in)
Horizontal shackle 20.64 mm (1316 in)
Vertical shackle 63.5 mm (212 in)
ID: D01930T1
ID: D01936T1
Package quantity 4
Pin tumbers 5
Body width 44.45 mm (134 in)
Shackle diameter 7.14 mm (932 in)
Horizontal shackle 20.64 mm (1316 in)
Vertical shackle 63.5 mm (212 in)
Exclusive micro-webs absorbs up to 100% more oil than other leading melt-blown oil absorbents
Improved absorbency means more liquid pickup, with less product, which can result in lower costs for the user
Very little lint to minimize contamination
One bale picks up an average of 25 gallons of oil
Comes as one bale of 50, 43.2 x 48.3 cm (17 x 19 in) pads
Supplier-branded product
Shop Supplies
ID: C41257T1
Absorbent Socks
Warranty: Manufacturers
Tubular absorbent socks absorb and contain leaks and spills around machinery
(hydraulic oil, coolants, non-aggressive fluids, water, and even hazardous fluids,
such as PCB oils and solvents)
Superior diking and damming capability (hugs the floor, creating an effective barrier or dike
that holds back fluids, in emergency situations, even after total absorption)
Used primarily for everyday housekeeping around machines that leak, seep, or spill fluids
Fits snugly against machine bases and wrap-around corners, keeping work area safe and dry
Fine-grade vermiculite filler (non-biodegradable) quickly soaks up leaks and drips
Durable, stitch-bonded polypropylene skin improves strength ID: D00476T1
Self-contained, no messy cleanup (no loose absorbents to spread, Quantity Absorption Absorption Shipping
sweep, scatter, shovel, or track around) Part No. Per Box Per Box Per Sock Size Weight
Reusable for water spills only 235-0844 40 113 l (30 gal) 2.8 l (.7 gal) 75 mm (3 in) diameter x
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean 121 cm (48 in) long 23 kg (50 lbs)
workplace floors 254-3969 8 57 l (15 gal) 6.8 l (1.8 gal) 75 mm (3 in) diameter x
Material Safety Data Sheets (MSDS) available 3 m (10 ft) long 11 kg (25 lbs)
Supplier-branded product
Reference
NELG5036
Absorbent Pillows
Warranty: Manufacturers
Absorbent pillow soaks up small to medium-size spills of oil and other non-aggressive fluids (works best once a spill has been contained)
Fast, effective way to control leaks
Use only as many as required (pillow's large surface area and superior wicking ability speeds cleanup time)
High absorption/fast-wicking cellulose fibers begin to work when pillow contacts liquid and continue until fully saturated
Strong, polypropylene cover will not tear when handling
Easy cleanup (simply pick up and place into proper disposal container)
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
Material Safety Data Sheets (MSDS) available
Supplier-branded product
Reference
NELG5036
ID: D01413T1
Quantity Absorption Absorption
Part No. Per Box Per Box Per Sock Size Shipping Weight
235-0845 40 76 l (20 gal) 1.9 l (64 oz) 25 x 25 x 5 cm (10 x 10 x 2 in) 10 kg (23 lbs)
193-0768 14 53 l (14 gal) 3.7 l (1 gal) 51 x 20 x 3.8 cm (20 x 8 1.5 in) 6.8 l (15 lbs)
ID: D00477T1
Heavyweight Absorbent Material for Most Oil, Water-Based Fluids, and Chemicals
Warranty: Manufacturers
Heavyweight, gray, absorbent material designed to absorb chemicals, solvents, oils, coolants, petroleum products,
water, water-based fluids, and even acids and bases
Multiple uses in maintenance, repair, and operating (MRO) areas; cover areas prone to overspray and spills, leaving
a cleaner, safer work area; ideal for heavy, concentrated machine leaks and large, spreading spills; keep floors
and walk areas safer by absorbing leaks, spills, drips, and overspray
Dark gray color hides dirt and grime of foot traffic
Thin profile slides into hard-to-reach areas
Made from flame-resistant material which can be used around spark-prone areas, such as welding or grinding equipment
Material will not degrade or have a chemical reaction to a wide variety of chemicals and strong solvents
Absorbs 10 times its weight, reducing material purchase and disposal costs
Dimple design helps absorb more liquid in less time (material retains liquid, even when fully saturated)
Roll material cuts easily with scissors or razor knife easily shaped to fit virtually any area
Material: 100% polypropylene
Multiple layers are held together with thermal bond points for added strength
Shop Supplies
and durabilitywill not fall apart or leave behind residue, even when fully saturated
235-0848 is packaged in convenient, easy-to-carry dispenser box
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
ID: D00483T1
Material Safety Data Sheets (MSDS) available
Supplier-branded product unless otherwise indicated
Heavyweight, white, absorbent material used for spill cleanup and everyday maintenance absorption
of non-flammable petroleum products and petroleum-based fluids, such as oil, gasoline, kerosene,
diesel fuel, solvents, etc.
Absorbs petroleum-based fluids onlyideal for situations where water absorption is not necessary
Roll material works great for factory floors saturated with oils or other petroleum-based fluids
Less expensive than a universal absorbent (ideal for oil-only spills or drips)
Material will not degrade or have a chemical reaction to petroleum-based fluids
Absorbs 10 times its weight, reducing material purchase and disposal costs
Dimple design helps absorb more liquid in less time (material retains liquid even when fully saturated)
Roll material cuts easily with scissors or razor knife easily shaped to fit virtually any area
Material: 100% polypropylene
Multiple layers are held together with thermal bond points for added strength
and durabilitywill not fall apart or leave behind residue, even when fully saturated
Material can be incinerated with less than 0.1% ash while producing 21,000 Btu/lb
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
Material Safety Data Sheets (MSDS) available
Supplier-branded product unless otherwise indicated
ID: D00489T1
Lightweight, gray, absorbent mat designed to cover areas prone to overspray and spills, leaving a cleaner, safer work area
Ideal for light machine overspray and small, annoying leaks of oils, coolants, solvents, and water
Great for day-to-day housekeeping and repair work
Cross roll perforations easily and quickly tear to any size sheet, as small as 25 x 61 cm (10 x 24 in)
Works well in narrow walkways
Multiple layers are held together with thermal bond points for added strength
and durabilitywill not fall apart or leave behind residue
Absorbs 10 times its weight, reducing purchase and disposal costs
Dark gray color hides dirt and grime
Dimple design absorbs more liquid in less time and greater liquid retention holds liquid even when roll is saturated
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
Material Safety Data Sheets (MSDS) available
Supplier-branded product
Shop Supplies
Quantity per box 1 roll
ID: D00482T1
Absorption per box 125 l (33 gal)
Size 61 cm (24 in) wide by 91 M (300 ft) long
Material 100% polypropylene
Ply 8
Shipping weight 11 kg (23 lbs)
ID: D01113T1
ID: D01425T1
Reorder
Consist Qty. Part No.
Absorbent sock, 8 cm x 122 cm (3 in x 48 in) 3 235-0844
Absorbent sock, 8 cm x 250 cm (3 in x 10 ft) 2 254-3969
Universal mat pads, 38 cm x 22 cm (15 in x 8.5 in) 52 235-0865/235-0848 1
Absorbent pillows, 25 cm x 25 cm (10 in x 10 in) 10 235-0845
Wipers, 33 cm x 30 cm (13 in x 12 in) 56 235-0859
Disposable bags and ties 5 ID: D01419T1
Shop Supplies
Reorder
Consist Qty. Part No.
Absorbent socks, 8 cm x 122 cm (3 in x 48 in) 5 235-0844
Universal mat, 38 cm x 18 m (15 in x 60 ft) 1
Absorbent pillows, 25 cm x 25 cm (10 in x 10 in) 4 235-0845
Disposable bags and ties 5
Nitrile gloves 1 4C-5522, 4C-5523, or 4C-5526
Safety goggles 1 233-8583
Repair putty, 178 mm (7 in) tube 1
When the Spill Strikes poster 1
ID: D01437T1
Reorder
Consist Qty. Part No.
Absorbent sock, 8 cm x 122 cm (3 in x 48 in) 4 235-0844
Absorbent sock, 8 cm x 250 cm (3 in x 10 ft) 1 254-3969
Absorbent pillows, 53 cm x 43 cm (21 in x 17 in) 2 235-0845 or 193-0768 1
Universal mat pads, 51 cm x 41 cm (20 in x 16 in) 50 235-0848
Disposable bags and ties 5
Shop floor sweep material 1
Loose absorbent material 2
Tamper-proof labels 6
Instructions 1
1 Equivalent not an exact replacement
ID: D01443T1
Highly absorbent materialcleans up oil, grease, water, and other messy fluids
Strong and abrasion-resistantresists tearing even when wet
Offers a low-lint alternative
Economical alternative to shop rags or towels Size 31.75 x 33.02 cm (12.5 x 13 in)
Soft cloth-like feel Color White
Quantity 56 wipers per bundle, 18 bundles per case
Shop Supplies
ID: D01699T1
Highly absorbent materialcleans up oil, grease, water, and other messy fluids
Soft cloth-like feel
Strong and abrasion-resistantresists tearing even when wet
Offers a low-lint alternative in a handy pop-up container
ID: D01705T1
Highly absorbent materialideal for use on grease, oils, and other messy fluids
Strong and abrasion-resistantresists tearing even when wet
Center-pull wiper wrapped in clear plastic film with re-closeable top tab for easy dispensing
ID: D01687T1
Highly absorbent materialcleans up oil, grease, water, and other messy fluids
Soft cloth-like feel
Strong and abrasion-resistantresists tearing even when wet Size 31.75 x 33.02 cm (12.5 x 13 in)
Color White
Quantity 692 towels per roll, 1 roll per case
ID: D01711T1
Shop Supplies
265-2255 All-Purpose Wipers
Warranty: Manufacturers
ID: D00970T1
Designed to outperform rags with Hydroknit technology in lightweight wiper Size 23.1 x 42.7 cm (9.1 x 16.8 in)
Reinforced for extra scrubbing and cleaning power Color white
Leaves no residue Quantity 126 wipers per box, 10 boxes per case
Good on grease and oil, adhesive cleaning and cable lubricant removal
Good for applying thinners and solvents
ID D00964T1
HydroKnit fast-absorbing materialhighly absorbent Size 31.8 x 36.6 cm (12.5 x 14.4 in)
Cleans up oil, grime, and solvents Color white
Good for applying thinner and solvents Quantity 76 wipers per bundle, 12 bundles per case
Pound for pound absorbs more oil and water than shop rags
Use with 1U-5432 Paper Wiper Dispenser
ID: D00952T1
ID: D01822T1
Shop Supplies
267-6536 Manufactured Rags
Towels compressed on roll so more towels fit in same space no sacrifice in performance,
change roll less often
Size: 20.3 cm x 304.8 m (8 in x 1000 ft) roll
Color: white
Material: paper
Package quantity: 12 rolls
ID: D01251T1
ID: D00976T1
Miscellaneous Personal/Safety
Miscellaneous
Two-piece construction with tightly Protects engine from dirt and debris
rolled rim Can be used as drop cloth or dust
Fully wax coated inside and out cover
with a satin finish Affordable and disposable
Capacity: 236.8 ml (8 oz)
Quantity: 2000 per case Size 122 x 183 cm
(48 x 72 in)
Quantity 50 sheets per case
Shop Supplies
ID: D01942T1
Rugs
ID: C79369T1
ID: C41221T1
Personal/Safety Miscellaneous
Shop Supplies
Anti-slip protection in hazardous situations
9.5 mm (38 in) thick, 100% Koroseal vinyl, coated with abrasive diamond-hard mineral particles
Underside is knobbed for aeration and sanitation
Reliable, anti-slip protection provides cushioned comfort and resiliency underfoot
Available in unslotted or slotted design for drainage
Edges beveled for maximum safety Part No. Size
Earthtone gray 4C-8116 61 cm x 9.14 m (2 ft x 30 ft)
4C-8117 91.4 cm x 9.14 m (3 ft x 30 ft)
4C-8118 61 cm x 18.3 m (2 ft x 60 ft)
4C-8119 91.4 cm x 18.3 m (3 ft x 60 ft)
4C-8120 91.4 cm x 121 cm (3 ft x 4 ft)
ID: C41223T1
4C-8121 91.4 cm x 182.9 cm (3 ft x 6 ft)
Miscellaneous Personal/Safety
ID: C78589T1
4C-9820 Portable Microfiche Reader with One Lens and 120 VAC Transformer
Shop Supplies
Warranty: Manufacturers
Combines the portability of a personal size reader with the quality and features of larger desktop models
Features a floating lens mount for positive focus, an auto opening carrier for precise indexing and a distortion free image
ID: C41361T1
Options
Part No. Description
4C-9822 Transformer, 120 VAC
4C-9824 Cigarette Adapter, 12 VDC
4C-9825 Carrying Case for Microfiche Reader
4C-9826 Spare Lamp, 9W, 6V, FKY
4C-9827 Overall Size Bifold Microfiche Holder with 30 Slots Available, 190.5 mm (712 in)
ID: C34413T1
ID: C34441T1
Personal/Safety Miscellaneous
Shop Supplies
Material: SBR Rubber
Part No. Size
262-9304 8 x 12.6 x 381 mm (.31 x .50 x 15 in)
262-9305 10 x 13 x 533 mm (.39 x .50 x 21 in)
ID: D00778T1
Black Wire
ID: D00820T1
172-0852 Creeper
Cat Mudflaps
ID: C70231T1
Shop Supplies and Tools Catalog 2007 2-111
02c.qxp 10/5/06 1:28 PM Page 112
Miscellaneous Personal/Safety
ID: C44032T1
Valve locations provide oil sample confidence and continuity Comparative data
of pressurized oil samples is more reliable because the sample is taken from a continuous
flow of oil at a known location.
A probe is provided that allows the valve to be quickly flushed prior to taking the oil sample
The sample bottle group is packaged, and sealed in a plastic bag to insure cleanliness
Pressurized oil sampling is a fast, economical and clean method of obtaining oil samples
from pressurized systems
Better represents oil condition because the oil is continually mixed and circulated
10 to 20 times faster than sampling oil from non-pressurized systems
Mailing container is available so the oil sample can be conveniently mailed
to the testing laboratory
ID: C80305T1
Item Part No. Description Item Part No. Description
1 169-8373 Bottle Group, 300 per box 12 8C-8456 Sealed Cap
2 162-8873 Probe, Holder 13 8C-3446 Oil Sampling Valve (716 inch-20 ext. thread)
3 177-9343 Cap and Probe Group, 500 per box 3J-7354 O-Ring Seal for 8C-3446 (not pictured)
4 4C-4600 Mailer Container reusable 14 7X-3387 Oil Sampling Valve (14 inch-18 NPTF ext. thread)
Tube 30.5 m rolls (100 ft) 15 8C-3345 Oil Sampling Valve (M10 x 1 ext thread)
5 1U-8757 6.35 mm O.D. x 30.5 m rolls 8T-7876 O-Ring Seal for 8C-3345 (not pictured)
(14 in x 100 ft) (5 rolls per box) 16 8C-3445 Dust Cap (Engine)
6 4C-4056 7.9 mm O.D. x 30.5 m rolls (516 in x 100 ft) 8C-3447 Dust Cap (Transmission) (not pictured)
(5 rolls per box) (not pictured) 8C-3451 Dust Cap (not pictured)
6V-0852 Dust Cap (Blank) (not pictured)
7 169-7373 Clear Bottle, 71g (2 12oz), 200 per box
Not shown
8 169-7372 Clear Bottle, 114g (4 oz), 200 per box
Tube, 2.1 m (7 ft) pieces
9 1U-5718 Vacuum Pump
1U-5719 Seal Kit for 1U-5718 Pump (not pictured) 4C-4055 6.35 mm O.D. x 2.1 m (14 in x 7 ft), 250 pieces per box
10 8T-9208 Probe, purging 4C-4057 7.9 mm O.D. X 2.1 m (516 in x 7 ft), 240 pieces per box
11 1U-7648 Tube Cutter 4C-3602 Frosted Bottle, 57g (2 oz), 700 per box
1U-8589 Replacement Blades (not pictured)
Personal/Safety Miscellaneous
169-8373 Bottle Group (Package Qty. 300) The 8C-8456 Sealed Cap can be applied to the valves with the valve dust cap
This bottle group is sealed in a plastic bag with sampling instructions included. retention ring left in place. This cap enables the user to quickly seal a leaking
The bottle group is ready to use when it is removed from the bag after the valve valve and prevents the need to immediately deadline (or stop) the machine or
has been purged and the sample is ready to be taken. The bottle included in this compartment. The leaking valve can then be repaired (flushed) or replaced
group (169-7372) has the capacity to provide a 114 g (4 oz) sample. The during the scheduled maintenance period.
169-7372 can also be ordered by itself, 200 per case. Some retrofit applications of the various valves may require the 8C-8456 Sealed
After the sample is obtained, the probe and tube are removed from the bottle Cap to provide maximum protection for both sealing and environmental
cap and holder, and discarded, and the cap-cover seals the bottle. Labels for contamination, such a brake and hydraulic system exposed to severe elements.
identifying the sample (obtained locally) can then be attached to the bottle for This cap serves ONLY as a temporary solution to a leaking sampling valve.
identification purposes. The 4C-4600 mail tube is available to send the oil
sample to the laboratory. The laboratory also provides the mailing label.
Shop Supplies
5P-9617 Adapter Reducer 916 inch-18 SAE external to 716 inch-20 SAE internal
169-7373 Bottle Assembly (Package Qty. 200) 3J-1907 O-Ring Seal for 5P-9617 Adapter
This smaller bottle assembly (169-7373) can be used with the 177-9343 Probe
and Cap Group and reduces mailing expense by approximately one-half for 3J-5390 Adapter Reducer 38 inch-18 NPTF external to 18 inch-27 NPTFinternal
dealers whose oil sample labs can provide effective full service analysis with 9T-6865 Adapter Plug 58 inch-12 SAE external to 716 inch-20 SAE internal
71 g (212 oz) or less of oil. These bottles can be used for engine samples since 2S-4078 O-Ring Seal for 9T-6865 Adapter Plug
particle count is not used for engine samples. This bottle can also be used with 5P-3501 Adapter 916 inch-18 SAE external to 14 inch-18 NPTF internal
the 1U-5718 Vacuum Pump used for non-pressurized oil sampling.
3J-1907 O-Ring Seal for 5P-3501 Adapter
3L-6521 Adapter Tee 14 inch-18 NPT(two internal and one external)
8T-9208 Probe Assembly (Package Qty. 1)
1P-9369 Adapter Tee 18 inch-27 NPT (two internal and one external)
(1
The 8T-9208 Probe Assembly can be attached to a 6.35 mm 4 in) I.D. rubber
hose (6K-0713 Hose 228.6 mm (9 in) long or any desired length cut from bulk 6V-3966 Pressure Test Valve 14 inch-18 NPTF external
5P-6442 Hose or equivalent 100R6 type high temperature low pressure 7M-8489 Adapter 90 elbow 916 inch-18 SAE external to 14 inch-18 internal
hose). The 8T-9208 Probe and hose connected to a locally obtained waste 5P-3413 Pipe Sealant 123 oz (85 g) tube.
container provide a method to purge or flush the 8C-3446, 8C-3345, or 7X-3387
sample valves prior to obtaining the desired oil sample using either the
169-8373 Bottle Group or 177-9343 Probe and Cap Group with the desired
bottle. Approximately 14.8 cm3 to 29.6 cm3 (12 to 1 ounce) of expelled fluid
purges the valves.
Pressurized systems on many Caterpillar products are factory equipped with
sampling valves to quickly extract oil samples with the above tools. Special
Instruction SEHS9043 details retrofitting some earlier models with oil sampling
valves, as well as pointing out the respective valve locations on models
currently factory equipped with the oil sample valves
The following valves, fittings and adapters are required or are commonly used
for retrofitting the sampling valves to pressurized systems:
Miscellaneous Personal/Safety
Fluid sampling extraction tools are used to obtain fluid samples from The 1U-8757 Tubing consists of five 30.5 m (100 ft) rolls of 6.35 mm (14 inch)
non-pressurized vehicle compartments such as final drives, differential O.D. plastic tubing. Random lengths of tubing can be easily dispensed from the
compartments, transfer cases, axle housings, etc. tubing package. The tubing connects the vacuum pump to the fluid in the
The 1U-5718 Vacuum Pump is capable of pulling 25 inch (7.62 mm) Mercury compartment. The tubing is discarded after each sample extracted.
(vacuum). The pump is compact and accepts the 169-7372, 114 g (4 oz), and The 4C-4056 Tubing consists of five 30.5 m (100 ft) rolls of 7.9 mm (516 inch)
169-7373 Bottle Assembly, 71 g (212 oz), bottles, or any 38 M threaded plastic O.D. plastic tubing. Again, random lengths of tubing can be easily dispensed
bottle, and 6.35 mm (14 inch) O.D. and/or 7.9 mm (516 inch) O.D. plastic tube. from the tubing package. This tubing permits extraction of heavier oils when
The 1U-5719 Kit provides replacement seals for the vacuum pump. using the vacuum pump.
The 169-7372 Bottle has 4 oz (114 g) capacity. The bottle is marked showing Both tubing sizes are also available in pre-cut 2.1 m (7 ft) lengths that are
fluid fill range at 34 capacity. The fill range provides a reminder to not overfill packaged 250 pieces per box. This eliminates cutting the tube for each sample.
the bottle. Partially filling the bottle satisfies both mailing and lab requirements. The 4C-4055 Tubing contains 250 pieces of 6.35 mm (14 inch) O.D. tubing each
Full bottles expand because of temperature changes that can possibly rupture 2.1 m (7 ft) long.
within the mailing container. The partially filled bottle also allows the lab to
The 1U-7648 Tube cutter is a convenient tool that easily cuts the desirable
shake the fluid sample prior to extracting fluid for testing. Labels identifying the
length of either 6.35 mm (14 inch) or 7.9 mm (516 inch) plastic tubing. The cutter
fluid are obtained locally. The label is processed locally and attached to the
Shop Supplies
can cut the tubing at 90 or at a bias. The 1U-8589 blades are available as
sample bottle.
replacement blades for the cutter.
The 169-7373 Bottle is the same as the 169-7372 bottle except the capacity is
The following summarizes various sampling tools available through the
71 g (212 oz) rather than 114 g (4 oz). Both are clear high performance plastic
Caterpillar Parts Distribution System:
rated at 91C (195F).
Tern plate funnel and metal hose provide grounding path to prevent static sparks Receiving opening diameter 114.3 mm (412 in)
Hose O.D. 23.8 mm (1516 in)
Height 304.8 mm (12 in)
ID: C41526T1
Shop Supplies
1B-7763 Pump Oil Can 268-5809 Funnel Kit
Warranty: Manufacturers
268-5814 Funnel
Warranty: Manufacturers
ID: C41579T1
Used to cover open or closed top drums cover snaps onto top of drum
KEE
S
IT
V
R FL UID O
E C
E
P
M
P
US
A BLE D R U
Supports the Caterpillar contamination control efforts CL KE
IT
ID: C66952T1
ID: C34476T1
Masking Paper
Shop Supplies
For protection, each roll is individually wrapped 1U-9734 Masking Paper 914.4 mm x 304.8 m 1
(36 in x 1000 ft)
The papers balanced construction offers
conformability, strength, and easy handling
ID: C33574T1
Masking Tape
Six sizes available 13 mm (12 in) to 76.2 mm (3 in) wide, 60 yd. roll
Clean removal less adhesive transfer reduces residue which can stick to work surface
Sharp paint edge thin, smooth backing gives a superior, straight paint line with no jagged edges
One-piece removal balanced construction allows for one-piece removal
Heat resistant will generally function well in conditions up to 93 C (200 F)
Used for covering address labels, packing lists, and sales slips
when protection against rough handling is needed
Aggressive water-based acrylic adhesive
Resistant to UV light and chemicals
Adhesion to steel: 17.9 N/cm (16 oz/in)
Tensile strength: 0.32 kg/mm (18 lb/in)
Thickness: 0.04 mm (1.6 mils)
Size: 96.01 mm x 659.9 m (3.78 in x 216.5 feet) roll
Material: polypropylene
Package quantity: 18 rolls per case
ID: D01203T1
Stain resistant and transparent with reinforced continuous glass yarn filaments
Used for closure and reinforcement of corrugated fiberboard boxes and performs well in holding,
reinforcing, combining, bundling, and unitizing applications
Size: 19 mm (34 in) x 55 m (60 yd) roll
Package quantity: 48
ID: C33566T1
Shop Supplies
Fiberglass reinforced tape excellent for light-duty Good for general purpose packaging needs
applications such as strapping, palletizing, Was developed primarily for single strip closure of regular slotted containers
and packaging Has very good resistance to edge tear and splitting due to shock from impact
Adhesion to steel: 8.5 g/mm (78 oz/in) Adhesive sticks at a touch to fiberboard
Elongation: 8% Size: 48 mm (2 in) x 100 m
Tack: 12.7 cm (5 in) Package quantity: 36
Tensile strength: 1.71 kg/mm (95.6 lb/in)
Thickness: 0.099 mm (3.9 mils)
Size: 8.89 mm x 548.64 m (0.35 in x 180 feet)
Package quantity: 96 rolls per case
ID: D01395T1
ID: C33565T1
Multipurpose tape for general mounting and holding Multipurpose non-adhesive thread seal tape used for many maintenance
Can be used to reattach interior cab material or head liners, sound proofing applications
material, etc. Polytetraflouroethylene (PTFE) self lubricates joints for a leak-proof seal
Extremely aggressive adhesive Easy to assemble and disassemble threaded joints when tape is applied
Silicone-coated polyethylene release liner makes unwinding easy Thickness: 0.09 mm (3.5 mils)
Peels clean leaving minimum residue Size: 13 mm x 76.2 m (0.5 in x 250 feet) roll
Adhesion to steel: Color: white
44 g/mm (40 oz/in) Material: polytetraflouroethylene
Tack: 5.1 cm (2 in) Package quantity: 200 rolls per case
Tensile strength:
0.36 kg/mm (20 lb/in)
Thickness: 0.28 mm (11 mils)
Size: 51 mm x 22.9 m
(2 in x 25 yards) roll
Package quantity: 24 rolls per case
ID: D01401T1
ID: D01389T1
Use this silver, polyethylene-coated, cloth tape for sealing and/or Use this olive drab, polyethylene-coated,
waterproofing applications cloth tape for sealing and/or
Has an extremely tough rubber adhesive waterproofing applications
Size: 51 mm (2 in) wide Conforms to mil spec PPP-T-60D
and 55 m (60 yds) long Rubber adhesive adheres securely
Package quantity: 1 Thickness: 12 mils
Tensile strength: 42 lbs per inch
Size: 51 mm wide x 55 m long
(2 in wide x 60 yd long)
Package quantity: 1
Shop Supplies
Premium quality vinyl tape with many electrical insulation applications Quality, black, vinyl tape with excellent electrical insulation properties
Size: 19 mm x 20.12 m long (34 in wide x 66 ft long) Size: 19 mm x 18.3 m long (34 in wide x 60 ft long)
Package quantity: 10 Package quantity: 10
Aluminum Tape
A variety of sizes of aluminum tape that can be used to seal openings of various machine
components such as cylinder assembly tubes during shipping and storage
Also useful to seal pump ports and other openings
3.5 Mil thick
Tough but flexible
Hi-tack
Part No. Description Size
Waterproof 1
9U-6910 Aluminum Tape 63.5 mm x 45.7 m (2 2 in x 50 yds)
9U-6911 Aluminum Tape 101.6 mm x 45.7 m (4 in x 50 yds)
9U-6912 Aluminum Tape 152.4 mm x 45.7 m (6 in x 50 yds)
9U-7042 Aluminum Tape 304.8 mm x 45.7 m (12 in x 50 yds)
ID: C68819T1
Provides quick, easy method for dispensing 4C-4095 Transparent Tape, Fast and economical clips of 4C-4094 Filament Tape can be applied
or any other film-backed box sealing tape directly from the roll Dispenser cuts and buffs tape with one-hand motion
Hand-held and portable excellent on center seam sealing Features hand brake in the core that allows operator to adjust tension
of regular slotted boxes for tighter box reinforcement and bundling applications
Sturdy, durable, easy to load and operate; handles tape widths High impact plastic and one piece construction makes the dispenser
from 38 mm (112 in) to 51 mm (2 in) very durable
Package quantity: 1 Handles filament tapes up to 19 mm (34 in) wide
Package quantity: 1
Shop Supplies
ID: C33568T1
ID: C33570T1
Features a hand brake in the core that allows operator to adjust tension for Durable metal dispenser for carton taping
tighter box reinforcement and bundling applications Holds 55 m (60 yd) roll of filament tape
Made from high impact, durable plastic Portable, refillable in seconds
Handles 4C-4094 Filament Tape Package quantity: 1
Package quantity: 1
ID: C33571T1
ID: C33569T1
51 mm (2 in) wide X 1.7 mm (.065 in) thick by 3 m (10 ft) long rolls
Great for quick buildup for moisture seal, for insulation, and for cushion on cable harness and wires
Sticks fast, seals fast and stays tight
Molds easily around irregular surfaces while holding its position through a range of temperatures
1 roll per package
ID: C34418T1
Handwrappers
4C-4776
ID: C34409T1
Shop Supplies
Portable
Mounts on any table surface
Accommodates up to 16 kg (35 lbs)
Adjustable zinc-plated support
Allows wrapping of smaller items using 4C-4880 Film and 4C-4779 or 4C-4780 Stretch Band-it Tools
ID: C34408T1
ID: C41596T1
Stretch Film
Shop Supplies
293-2978 Hand Wrap Standard-Duty Stretch Film
ID: C54434T1
Strong durable plastic excellent for pallet unitization and load retention
Ensures product will arrive at destination clean and undamaged
To determine the size of opening for gusseted bags, add the width and depth
UVI protection will protect bag from sun damage in outdoor storage.
Strong durable plastic excellent for pallet unitization and load retention
Ensures product will arrive at destination clean and undamaged
5% UVI protection will protect bag from sun damage in outdoor storage
ID: D01864T1
ID: D01876T1
Exceptional strength
Plastic slider top for easy opening and closing
Material: linear low density polyethylene (LLDPE)
ID: D01882T1
ID: D01888T1
Strapping Seals
Shop Supplies
Economical alternative to steel strapping
Easy to use on a wide range of products
Used with 270-5344 Strapping Seals, 12.7 mm (12 in)
Breaking strength: 272.1 kg (600 lbs)
ID: D01900T1
Used for protecting metal parts and tools, metal sheeting interleaving, protecting goods on pallets from moisture and debris
Fifty pound virgin kraft paper with 10 pound polycoating
Shop Supplies
ID: D01179T1
ID: C44294T1
Tightens cable ties and cuts off excess when preset tension is attained
Used with straps, harnesses, and hoses
Has a comfortable grip and handle for all hand sizes
Tightens up to 12.7 mm (12 in) wide straps
Weight: 454 g (16 oz)
Create metal labels that stand up to harsh weather, temperature and corrosion
For tagging hoses, castings, engine components, pipes, etc.
Heavy-duty cast aluminum body construction
Built-in hole punch
Front scissors cut-offcuts tape exactly where required
Tape advance and rewind control
ID: C81379T1
Wheel characters-selection window helps reduce embossing errors
Also embosses 12.6 mm (12 in) vinyl tape 9U-7918 Label Maker Kit
Part No. Description Size
Label maker
9U-7919 Character Wheel, A-Z, 2-9 Character height 4.8 mm (188 in)
9U-7920 Aluminum Tape Roll, no adhesive 1 in x 16 ft
2
Shop Supplies
Optional
Part No. Description Quantity Size
9U-7920 Aluminum Tape Roll, no adhesive 10 per box 12.7 mm (12 in) x 4.88 m (16 ft) x 0.1524 mm (0.006 in thick)
9U-7921 Aluminum Tape Roll, with adhesive 10 per box 12.6 mm (12 in) x 3.66 m (12 ft) x 0.33 mm (0.13 in thick)
9U-7922 Stainless Steel Tape Roll, no adhesive 10 per box 12.7 mm (12 in) x 6.41 m (21 ft) x 0.127 mm (.005 in thick)
Multi-functional date/time stamp is also a full-featured digital alarm clock and a quick-reference desk calendar.
Pre-Programmed Calendar
Gives month, date, year, day of week
Programmed 200 years into the future with automatic leap-year adjustment
ID: C81380T1
Janitorial Products
Brooms
Push Broom
100% Select black tampico
Clear lacquered half-round hardwood block
Recommended for dry sweeping semi smooth floors
Handle not included
Handle
Selected hardwood with clear lacquered finish
One end rounded and other end equipped with crimped on metal thread
to fit standard floor brush blocks ID: D00814T1
Shop Supplies
Janitorial Equipment
Janitorial Bucket
Side pressure wringer
7.6 cm (3 in) casters
Color: yellow
Size: (L x W x H) 33 x 33 x 68.6 cm (13 x 13 x 27 in)
Mop Heads
Lay-flat style
Screw-type mount
Use with 264-4364 Mop Handle
Plastic, super durable trash can liners with superior stretch and tear resistance
Bottom designed for added strength and greater leak resistance
Quantity
Part No. Strength Capacity Liner Size per Roll
263-0885 Medium 57 l 60.96 cm x 81.28 cm 500
(10-12 micron) (15 gal) (24 in x 32 in)
263-0886 Heavy 125 l 83.82 cm x 99.06 cm 250
(12-14 micron) (33 gal) (33 in x 39 in)
263-0887 Extra-Heavy 208 l 91.44 cm x 144.78 cm 200
(15-17 micron) (55 gal) (36 in x 57 in)
ID: D01197T1
ID: D01870T1
Shop Supplies
Ladders
Step Ladder
Fiberglass nonconductive industrial step ladder designed for everyday use
Extra heavy-duty, 136 kg (300 lb) weight rating
Thick non-marring rubber tread provides a slip resistant footing
Wide back braces provide maximum stiffness and discourages unsafe climbing
Full channel fiberglass rails are covered with a polyester veil for years of service
Double-rivet step construction with tubular steel rivets for maximum strength
Nonconductive structural molded top with tool slots is extremely durable
(slots help keep tools close at hand)
Spreader braces are located inside rails to help protect them from getting
hooked or damaged in transit
Reinforced bottom back brace provides additional strength to bottom of ladder
Shelf Ladder
Aluminum industrial shelf ladder for everyday industrial use
Extra heavy-duty, 136 kg (300 lb) weight rating
Steps are level when ladder is set at 72 degrees
Equipped with thick rubber bumpers extending 152 mm (6.0 in) from top
of ladder down side rails
Two pair of heavy duty steel gussets support bottom step
Angled feet with thick rubber thread on both legs provide sure footing
Each step is secured with solid aluminum rivets for maximum strength
Part No. Description Height Step Size Bottom Width Approx. Spread Approx. Weight
ID: D00784T1
263-1030 Step Ladder 1.2 m (4 ft) 7.6 cm (3 in) 48 cm (18 78 in) 71 cm (28 in) 5.9 kg (13 lbs)
263-1031 Step Ladder 2.4 m (8 ft) 7.6 cm (3 in) 63 cm (24 78 in) 132 cm (52 in) 12.2 kg (27 lbs)
263-1019 Shelf Ladder 1.8 m (6 ft) 7.6 cm (3 in) 39 cm (15 14 in) 4.5 kg (10 lbs)
263-1022 Shelf Ladder 2.4 m (8 ft) 7.6 cm (3 in) 39 cm (15 14 in) 7.7 kg (17 lbs)
Hardware Bin Kits Part No. Thread Coating Contains Pieces Bolt Head
3E-6640 Inch - Coarse Phosphate and oil 59 Part Numbers 1735 Hex
3E-9420 Inch - Coarse Phosphate and oil 38 Part Numbers 1975 Hex
Thirteen kits for customers who want to stock hardware bins for their 3E-9421 Inch - Fine Phosphate and oil 38 Part Numbers 1650 Hex
service departments and/or service vehicles with various quantities
3E-9422 Metric - Coarse Phosphate and oil 38 Part Numbers 1580 Hex
of popular sizes of Cat bolts, nuts, and washers
222-9998 Inch - Coarse Zinc dichromate 59 Part Numbers 2175 Hex
Hardware packaged in resealable plastic clamshell packages
222-9999 Inch - Coarse Zinc dichromate 38 Part Numbers 1520 Hex
Smaller easy-to-use packages offer convenience for the service technician
223-0000 Metric - Coarse Phosphate and oil 56 Part Numbers 1965 Hex
223-0001 Metric - Coarse Zinc dichromate 56 Part Numbers 1985 Hex
223-0002 Metric - Coarse Zinc dichromate 38 Part Numbers 1510 Hex
223-0003 Inch - Coarse Phosphate and oil 38 Part Numbers 1420 Socket
223-0004 Metric - Coarse Phosphate and oil 38 Part Numbers 1420 Socket
222-9996 Inch - Coarse Phosphate and oil 38 Part Numbers 1420 12-Point
Shop Supplies
222-9997 Inch - Fine Phosphate and oil 40 Part Numbers 1570 12-Point
ID: D01834T1
Consists of:
Retail Package Retail Bulk
Part No. Description Pkg. Qty. Part No.
247-0188 1 -20 x 12 in Hex Head Bolt 50 0S-1614
4
247-0214 5 in Lock Washer 100 3B-4505 247-0600 M8 x 1.25, 45 mm, Hex Head Bolt 25 8T-0276
16
247-0215 5
16-18 Full Nut 50 5S-0003 247-0601 M8 x 1.25, 50 mm, Hex Head Bolt 25 6V-3918
247-0216 3 x 12 in Hex Head Bolt
8-16 50 4F-4879 247-0602 M8 x 1.25, 60 mm, Hex Head Bolt 10 8T-0100
247-0217 3 x 34 in Hex Head Bolt
8-16 25 0S-0509 247-0603 M8 x 1.25, 70 mm, Hex Head Bolt 10 5P-8347
247-0218 3
8-16 x 1 in Hex Head Bolt 25 0S-1594 247-0604 M8 Washer 25 9M-1974
Shop Supplies
247-0219 3 x 1 14 in Hex Head Bolt
8-16 25 0S-1588 247-0605 M8 x 1.25, Hex Nut 50 5P-7970
247-0220 3 x 1 12 in Hex Head Bolt
8-16 25 0S-1591 247-0606 M10 x 1.5, 20 mm, Hex Head Bolt 25 6V-6317
247-0221 3 x 1 34 in Hex Head Bolt
8-16 25 0S-1571 247-0607 M10 x 1.5, 25 mm, Hex Head Bolt 25 6V-4248
247-0222 3
8-16 x 2 in Hex Head Bolt 25 0S-1590 247-0608 M10 x 1.5, 30 mm, Hex Head Bolt 25 6V-1820
247-0223 3 x 2 14 in Hex Head Bolt
8-16 10 0L-2070 247-0609 M10 x 1.5, 35 mm, Hex Head Bolt 25 6V-3822
247-0224 3 x 2 12 in Hex Head Bolt
8-16 10 0L-1143 247-0610 M10 x 1.5, 40 mm, Hex Head Bolt 10 6V-5842
247-0225 3 x 2 34 in Hex Head Bolt
8-16 10 0T-0573 247-0611 M10 x 1.5, 45 mm, Hex Head Bolt 10 6V-5843
247-0226 3
8-16 x 3 in Hex Head Bolt 10 0S-1619 247-0612 M10 x 1.5, 50 mm, Hex Head Bolt 10 6V-4249
247-0227 3 in Hard Washer 25 5M-2894 247-0613 M10 x 1.5, 60 mm, Hex Head Bolt 10 6V-5230
8
247-0228 3 in Lock Washer 100 3B-4506 247-0614 M10 x 1.5, 65 mm, Hex Head Bolt 10 8T-5035
8
247-0229 3
8-16 Full Nut 50 9S-8752 247-0615 M10 x 1.5, 70 mm, Hex Head Bolt 10 6V-7981
247-0230 1 x 12 in Hex Head Bolt
2-13 25 1K-6705 247-0616 M10 Washer 25 6V-5839
247-0231 1 x 34 in Hex Head Bolt
2-13 25 0S-1620 247-0617 M10 x 1.50, Hex Nut 25 2Y-5829
247-0232 1
2-13 x 1 in Hex Head Bolt 25 0S-1621 247-0618 M12 x 1.75, 20 mm, Hex Head Bolt 10 8T-0293
247-0233 1 x 1 14 in Hex Head Bolt
2-13 10 0S-1595 247-0619 M12 x 1.75, 25 mm, Hex Head Bolt 25 6A-5591
247-0234 1 x 1 12 in Hex Head Bolt
2-13 10 0S-1585 247-0620 M12 x 1.75, 30 mm, Hex Head Bolt 10 6V-3668
247-0235 1 x 1 34 in Hex Head Bolt
2-13 10 0S-1587 247-0621 M12 x 1.75, 35 mm, Hex Head Bolt 10 6V-8675
247-0236 1
2-13 x 2 in Hex Head Bolt 10 1A-1460 247-0622 M12 x 1.75, 40 mm, Hex Head Bolt 10 6V-8197
247-0237 1 x 2 14 in Hex Head Bolt
2-13 5 2B-0947 247-0623 M12 x 1.75, 45 mm, Hex Head Bolt 10 6V-5684
247-0238 1 x 2 12 in Hex Head Bolt
2-13 5 9S-1366 247-0624 M12 x 1.75, 50 mm, Hex Head Bolt 10 6V-7673
247-0239 1 x 2 34 in Hex Head Bolt
2-13 5 1A-5822 247-0625 M12 x 1.75, 60 mm, Hex Head Bolt 5 6V-3823
247-0240 1
2-13 x 3 in Hex Head Bolt 5 0L-1329 247-0626 M12 Washer 25 5P-8245
247-0241 1 in Hard Washer 25 5P-8245 247-0627 M12 x 1.75, Hex Nut 25 6V-8149
2
247-0243 1
2-13 Full Nut 25 1F-7958 247-0699 Hose Clamp 60 mm - 82 mm 2 5P-4868
247-0244 5 x 34 in Hex Head Bolt
8-11 10 1H-9456 247-0700 Hose Clamp 45 mm - 67 mm 2 5P-0597
247-0245 5
8-11 x 1 in Hex Head Bolt 10 0S-1624 247-0701 Hose Clamp 16 mm - 27 mm 5 5D-1026
247-0246 5 x 1 14 in Hex Head Bolt
8-11 10 0S-1592 247-0702 Hose Clamp 6 mm - 16 mm 6 1P-4278
247-0247 5 x 1 12 in Hex Head Bolt
8-11 5 0S-1566 247-0703 Hose Clamp 108 mm - 130 mm 2 5P-1717
247-0248 5 x 1 34 in Hex Head Bolt Cotter Pin 18 in x 1 in Lg
8-11 5 0S-1589 247-0717 50 3B-4617
247-0249 5 Cotter Pin 18 in x 34 in Lg
8-11 x 2 in Hex Head Bolt 5 1A-1135 247-0718 50 3B-4615
247-0250 5 x 2 14 in Hex Head Bolt Cotter Pin 332 in x 12 in Lg
8-11 5 8S-9092 247-0719 50 3B-4607
247-0251 5 x 2 12 in Hex Head Bolt Cotter Pin 18 in x 2 in Lg
8-11 5 0S-1625 247-0720 50 3B-4621
247-0252 5 x 2 34 in Hex Head Bolt Cotter Pin 18 in x 1 14 in Lg
8-11 5 1A-8537 247-0721 50 3B-4618
247-0253 5
8-11 x 3 in Hex Head Bolt 5 1B-4367 247-0749 Fuse (10 Amp) 5 3K-8782
247-0254 5 in Hard Washer 10 5P-8247 247-0750 Fuse (15 Amp) 5 8M-8948
8
247-0256 5
8-11 Full Nut 10 4K-0367 247-0752 Mini Fuse (10 Amp) 5 113-8490
247-0583 M6 x 1, 12 mm, Hex Head Bolt 50 8T-0639 247-0753 Mini Fuse (15 Amp) 5 113-8491
247-0584 M6 x 1, 16 mm, Hex Head Bolt 50 6V-8837 247-0754 Mini Fuse (20 Amp) 5 113-8492
247-0585 M6 x 1, 20 mm, Hex Head Bolt 50 6V-8214 247-0755 Mini Fuse (25 Amp) 5 113-8493
247-0586 M6 x 1, 25 mm, Hex Head Bolt 50 6V-8490 247-0762 Cable Strap 170.2 mm (6.7 in) long 20 3S-2093
247-0587 M6 x 1, 30 mm, Hex Head Bolt 25 8T-0640 4.9 mm (.194 in) wide
247-0588 M6 x 1, 35 mm, Hex Head Bolt 50 6V-2315 247-0763 Cable Strap 355.6 mm (14 in) long 10 6K-0806
4.9 mm (.194 in) wide
247-0589 M6 x 1, 40 mm, Hex Head Bolt 25 2W-9499
247-0764 Cable Strap 355.6 mm (14 in) long 10 7K-1181
247-0590 M6 x 1, 45 mm, Hex Head Bolt 25 6V-7728 7.9 mm (.310 in) wide
ID: D00702T1
Check-a-Thread
Shop Supplies
Reference
NEHS0571 Special Instruction, Cross-Reference List (identifies the proper Caterpillar O-ring part number)
ID: D01561T1
Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Coolants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
Paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38
Introduction
MSDS Information NOTE:
MSDS Information for Caterpillar Chemicals/Lubricants/Adhesives can be found at Not all products are available worldwide. Some products have different part
www.catmsds.com numbers for Europe, Africa, Middle East, and Commonwealth of Independent
States (EAME) dealers and customers to order due to specific hazardous
material label information required in EAME for these products. Products
Medical Emergency Contacts which require specific hazardous material labels in EAME may not be available
For a medical emergency involving Caterpillar Chemicals/Lubricants/Adhesives, call: in all container sizes in EAME. N/A indicates a product which is not available
800-458-5924 (in United States of America) in EAME.
303-893-1322 (in all other countries)
Kit Consist
Part No.
Part No. (EAME only) Description Size
4C-9507 185-3988 Retaining Compound 50 ml (1.69 fl oz)
7M-7456 185-3994 Bearing Mount 50 ml (1.69 fl oz)
9S-3263 185-3996 Thread Lock 50 ml (1.69 fl oz)
ID: C33317T1 5P-3413 185-3992 Pipe Sealant 50 ml (1.69 fl oz)
169-5464 185-4004 Quick Cure Primer 133 ml (4.5 fl oz)
ID: C79507T1
Used for repair of pitting/cavitation erosion in engine blocks 1U-6136 (207-7530 EAME only) Belzona 1111 Super Metal
Can be molded or hand formed and machined after it is cured
Contains metal filled epoxy compounds to replace the metal which has been
eroded away by pitting/cavitation in engine blocks At 25 C (77F), has a 15 minute pot life
Can be machined after 1 hour; has full mechanical properties after 24 hours;
1U-6140 (207-7532 EAME only) Belzona 1221 and can be immersed in chemicals after 48 hours
Super E-Metal
Can be molded or hand formed and machined after it is cured Reference
At 25 C (77F), has a 3 minute pot life SEHS8869 Special Instruction; contains instructions for making repairs to engine
blocks with 1U-6132 Belzona 1311 Ceramic R Metal
Can be machined after 35 minutes; has full mechanical properties
after 60 minutes; and can be immersed in chemicals after 20 hours SELD0458 Reconditioning Bulletin for 3500 Cylinder Block Pitting; instructions
for repairing water port damage with 1U-6132 Belzona 1311 Ceramic R Metal
1U-6132 (207-7531 EAME only) Belzona 1311 SEBF8263 Reuse and Salvage Guide for 3500 Top Deck Repair on cylinder
Ceramic R Metal blocks; instructions for repairing top deck damage with 1U-6132 Belzona 1311
Can be molded or hand formed but it must be machined with diamond Ceramic R Metal
tooling or ground after it is cured
At 25 C (77F), has a 15 minute pot life Come in handy plastic tool box; knives, spatulas,
work surface and tool box are not serviced separately
Can be machined or ground after 1 hour; has full mechanical properties after
24 hours; and can be immersed in chemicals after 48 hours Part No.
Part No. (EAME only) Description Qty.
1U-6140 207-7532 Belzona 1221 Super E-Metal (125 gram) Kit 4
1U-6132 207-7531 Belzona 1311 Ceramic R Metal (2 Kg) Kit 1
1U-6136 207-7530 Belzona 1111 Super Metal (2 Kg) Kit 1
1U-6128 Reinforcement Tape (10 meter) 1
Knives (Plastic) 2
Work Surface (Plastic) 1
Spatulas (Plastic) 2
Instructions for Use 3
MSDS for all products in kit 6
NOTE: These products are packaged in kits to provide the correct ratio for
mixing. They must be mixed only in the correct ratio in order to get satisfactory
results. The various bases and solidifiers are not serviced individually.
Instructions for use of each of these compounds are included in the kit and
ID: C66966T1 the correct mix ratios are specified for each. If desired, the cure speed of
the Belzona compounds can be accelerated by the application of heat. You can
apply the heat by either heat lamps, ovens or heat guns.
ID: D01645T1
Part No.
Pkg. Part No. (EAME only) Size Qty
Part No. Size Qty. 4C-4030 N/A 10 ml (.34 fl oz) 10
269-1943 48.2 g (1.7 oz) tube 1 ID: C79561T1
9S-3263 185-3996 50 ml (1.69 fl oz) 10
Holds seals in place during assembly High shear strength 21mPa (3000 PSI)
Contents comes in a syringe Service temperature up to 149C (300F)
Used for Single Cylinder Oil Test Engines (SCOTE) Medium gap fill, up to .13 mm (.005 in)
Size: 20 ml (.68 fl oz) Fast cure speed full cure time 1-2 hours
at room temperature
Used to seal, lock in place, augment press fits
and slip fits on:
- Large bolts
- Lip seals
- Ball bearings in housings or on shafts
- Thin wall bushings in housings
- Sintered bearings ID: C79516T1
- Plain bearings
- Needle bearings
- Core plugs Part No.
Part No. (EAME only) Size Qty.
- Wear sleeves
- Cartridge pins 4C-4032 N/A 10 ml (.34 fl oz) 10
on loader linkages 7M-7456 185-3994 50 ml (1.69 fl oz) 5
- Gears
- Pulleys
- Fan hubs
Wicking Sealant
Cyanoacrylate Adhesives
Use for instant bonding on mated metal, plastic or rubber parts and assemblies
Good general purpose liquid super glue
Fast curing and high strength
153-9155 (black) has increased impact resistance
Store between 2C and 8C (35.6F to 46.4F)
Gap fill: 0.0762 mm (0.003 inch) for clear and 0.15 mm (0.006 inch) for black Part No. Color
Size: 3 g (.105 oz) 157-7228 Clear
See Material Safety Data Sheet (MSDS) for additional information 152-9155 Black
ID: D01269T1
ID: D00635T1
ID: C44114T1
ID: C79562T1
ID: C79515T1
ID: C80053T1
Gasket Maker
Medium strength for rigid flanges where extra shear strength is desired
Service temperature up to 175C (350F)
Large gap fill, up to .5 mm (.020 in)
Fast cure speeds Part No.
Uses: Part No. (EAME only) Size
- original equipment gasket for many applications 6V-6640 185-3985 50 ml (1.69 fl oz)
- seals and locks tapered pipe plugs, nipples, and fittings
- core plugs; some final drive flanges
- replaces flywheel housing gasket in several applications
ID: C79588T1
N/A in EAME
Thin, brushable, for sealing finely machined surfaces
Resists gasoline, diesel fuel, oils, antifreeze, alkali, acids, steam
Withstands pressures to 34474 kPa (5000 PSI)
Withstands temperature to 204C (400F)
Seal many types of gear type pumps; seals rubber hose to nipple connections
Size: 120 ml (4 fl oz) can
Quantity: 12
ID: C79583T1
ID: C79563T1
ID: C79512T1
ID: C79544T1
4C-6715 Thermally Conductive RTV Kit 4C-6922 Superior E-Z Thrust Caulker
Increases thermal conductivity between diode and aluminum heat sink Holds any 12 oz. tube designed for use with a caulking gun
assembly on rotating field of power generator Recommended for all grades of caulks, sealants and adhesives
High thermal conductivity and electrical isolation from heavy to light consistencies
Conformable, cure in place thermal interface Size of cartridge: 110 Gal.
Material has a 6 month shelf life when stored at 24 C (75 F)
Storage at or near freezing (0 C (32 F) prolongs product life
Also see heat sink compound
ID: C41206T1
ID: D01479T1
ID: C41207T1
9U-6919 Butyl Sealant 3 inch x 1 inch x 50 foot roll 119-0781 Clear Silicone Adhesive 300 ml (10.2 oz) cartridge
8 8
Pre-heat 175-2935 inside 175-2936 Oven for 1 hour prior to repairs. Clean Window Tool Kit:
the area to be repaired with 9U-6917 (189-8679 EAME only) (pour top quart) 127-6421 Window Tool Kit
or 222-3117 (189-6296 EAME only) (aerosol). Part No. Description
If glass is supplied without ceramic coating, use 121-3911 (187-4858 EAME 121-9777 Cutout Wire
only) to prepare the area. Wait 10 minutes, then use 175-2934 (187-4864 EAME 121-9780 Handles for cutout wire
only) to activate the area. Wait 10 minutes, then apply the pre-heated 175-2935 121-9778 Cutout Knife
(187-4857 EAME only) to the area.
121-9779 Replacement Blades for 121-9778
1-hour drive-away time, 2-hour full cure 121-9782 Suction Cup Holder
See SEHS9824-01 Special Instruction (6/99) for detailed instructions. 121-9781 Heavy Duty Caulking Gun
127-6883 Sponge Brushes
To bond large windows:
Part No.
Part No. (EAME only) Description Size
121-3911 187-4858 Window Primer 250 ml (8.5 oz) tube
121-3908 187-4856 Window Adhesive 310 ml (10.5 oz) tube
Clean the area to be repaired with 9U-6917 NACD only (189-8679 EAME only)
(pour top quart) or 222-3117 (aerosol) (189-6296 EAME only). Use 121-3911
(187-4858 EAME only) to prepare the area. Wait 10 minutes, then apply
121-3908 (187-4856 EAME only) to the area.
See SEHS9824-01 Special Instruction (6/99) for detailed instructions.
Cleaners
Good for all types of glass Blue-tinted windshield cleaner and de-icer
Safe for plastics, vinyl, tile, and all hard surfaces Effective to -28.89 C (-20 F)
Non-streaking
Dries completely Pkg.
Does not leave a film Part No. Size Qty.
ID: D00665T1
ID: D01663T1
ID: C79750T1
Service Parts
Part No. Description Quantity
9U-7971 Air Filter Cleaner 0.95 l (1 qt)
102-9721 Filter Cleaner Oil 0.35 l (12 oz) ID: C66640T1
ID: C80311T1
Pressure Wash
Hydrosolv 4165
Heavy-duty concentrated alkaline cleaner formulated
for use in high-pressure washers
Provides two weeks rust protection if you do not rinse
the part after cleaning
ID: C80311T1
ID: C80222T1
Cleaners
ID: C80311T1
Pkg.
Part No. Size Qty.
269-8297 18.93 l (5 gal) bucket 1
Coolants
Does not require liquid or spin-on supplemental coolant additives (SCAs) 25 205-6612 0.250 (1 qt) 119-5152
Increases coolant service life from 1 210-0786
6,000 to 12,000 service hours over 1 215-4241 2
conventional coolant 5 219-3039 2
Costs from 40 to 60 percent less than 1 Australia
conventional coolant over the life 2 Brazil
of the product
ID: D01297T1
Coolants
ID: D01315T1
Cooling System Cleaner Standard Cooling System Cleaner Quick Flush
Applications Applications
Cooling system cleaner; full effect after several weeks in the cooling system For use as preventative maintenance or as a short-time flush at the
Not for use in removing large amounts of oil from cooling systems time of coolant change
Not for use in removing large amounts of oil from cooling systems
Feature
Removes scale or lime deposits Feature
Removes limes, scale and solder bloom
Benefit Benefit
Cleans cooling system while Allows for one-step cleaning in
the machine works just 90 minutes
Size Size
(gal) (L) Part No. (gal) (L) Part No.
Cooling System Cleaner Standard Cooling System Cleaner Quick Flush
0.50 (2 qt) 6V-4511 0.125 (1 pt) 4C-4609
1.89 185-5121 0.250 (1 qt) 4C-4610
1 4C-4611
ID: D01321T1
5 4C-4612
55 4C-4613
3.79 185-4630
ID: D01327T1
ID: D01333T1
NACD
Item Part No.
Coolant Conditioner Test Kit 4C-9301
(100 Test Strips, Sample, Bottle, Pipette)
Refill Test Strips (1 Bottle of 50) 4C-9297
ID: D01339T1
Lubricants
Cat DEO
Applications Size Size
Preferred engine oil for Cat machines and engines; (gal) (L) Part No. (gal) (L) Part No.
used as factory-fill Cat DEO Cat DEO
For use in Cat diesel, gasoline and natural gas engines SAE Oil Viscosity: 10W-30 SAE Oil Viscosity: 30
API/OEM Specification: API CI-4, ECF-1 0.250 (1 qt) 8C-3702
5 3E-9709
Features (4x) 1 248-7520
Reduces piston ring groove deposits to minimize ring sticking 55 3E-9708 5 8C-3700
Controls soot build-up, which can lead to filter plugging Bulk 155-6198 55 8C-3699
Exceeds API (American Petroleum Institute) test standards 18 283-1709 Bulk 155-6201
20 3E-9844 5 9X-6178
Benefits 200 130-7055 20 7X-7840
Ensures optimum performance in Cat engines due to premium 208 3E-9707 200 7X-2887
quality and conformance to four Cat proprietary engine tests 1000 148-3539 205 7X-7839
Improves fuel and oil consumption Bulk 5P-2586 208 9X-6462
Cat DEO 1000 9X-6271
SAE Oil Viscosity: 15W-40
API/OEM Specification: API CI-4, ECF-1 Bulk 8C-3698
0.250 (1 qt) 3E-9715 Cat DEO
SAE Oil Viscosity: 40
(4x) 1 248-7518
0.250 (1 qt) 8C-3707
5 3E-9713
1 8C-3706
55 3E-9712
5 8C-3705
Bulk 155-6199
55 8C-3704
Bulk (rail car) 283-3425
Bulk 155-6202
1 123-4077
18 9X-2004
4 3E-9902
19 9X-8529
5 3E-9901
20 7X-7843
18 3E-9900
200 9X-8528
19 3E-9849
205 7X-7842
20 3E-9848
208 9X-6463
60 121-4038
1000 9X-6272
ID: D01345T1 200 3E-9842
1200 203-1044
205 3E-9841
2000 119-5134
208 3E-9840
10,000 119-5133
1000 3E-9838
15,000 119-5132
1040 201-0775
Bulk 8C-3703
2000 120-5285
10,000 119-5131
15,000 119-5130
Bulk 8T-9548
Lubricants
ID: D01717T1
Cat NGEO
Application Size
Natural gas engine oil for use in all Cat natural gas engines and any (L) Part No.
four-cycle, medium-to-high speed gas engine requiring a low ash
Cat NGEO
level product SAE Oil Viscosity: 30
19 121-0326
Features 205 9X-8526
Provides excellent foam and corrosion resistance
Cat NGEO
Improves piston cleanliness and controls carbon deposits SAE Oil Viscosity: 40
19 121-0327
Benefits 200 197-6911
Provides maximum protection against piston scuffing, scoring
and piston/cylinder liner wear 205 9X-8527
Provides excellent valve guide face and seat protection 208 105-3336
Drain recommendations 209 166-3491
1000 159-8156 ID: D01357T1
G3400 - 750 hrs
G3500 - 1000 hrs
G3600 - 5000 hrs
Lubricants
Cat TDTO-TMS
Application
Transmission and drive train oil for use in all seasons
Size
Features (gal) (L) Part No.
Exceeds the Cat TO-4 industry specification and meets Allison C-4 Cat TDTO - TMS
transmission peformance SAE Oil Viscosity: Multi-Viscosity
API/OEM Specification: Cat TO-4M
Protects against scoring and pitting of gear teeth and bearings
5 154-0195
Improved cold water performance
55 154-0194
Bulk 154-0192
Benefits
Improves transmission performance in cold weather 20 154-0196
Provides extended drain capability 208 154-0197
Compatible for use in multiple compartments Bulk 154-0193
ID: D01369T1
Cat MTO
Size
(gal) (L) Part No.
Application Cat MTO
For use in specified Cat components and systems, such as Backhoe Loader SAE Oil Viscosity: 10W-30
Rear Axles, and Compactors CP563 and CS563 Rear Axles API/OEM Specification: Ford M2C134D/C, John
Deere J20A/C, Case MS1205, MS1207
Features 5 105-3335
Meets Ford spec M2C134 D/C 55 105-3334
Enhanced shear stability in field service and extreme-pressure Bulk 155-6218
wear protection 5 172-6894
Optimized low-temperature performance 18 135-3189
19 112-9183
Benefits 20 109-4395
Provides considerable improvement in wet brake control
200 126-2700
Optimized wear protection of gears, pumps and hydraulic valves
205 138-4271
208 120-5286 ID: D01375T1
Bulk 105-3333
Cat FDAO
Size
Applications (gal) (L) Part No.
Preferred final drive and axle oil for Cat machines; used as factory-fill Cat FDAO
SAE Oil Viscosity: 60
for all Cat off-highway trucks and D6R-D11R tractor final drives
API/OEM Specification: Cat FD-1
Not to be used in compartments which contain brake or friction materials
5 184-6022
(unless specified in the Operational & Maintenance Manual; not to be
used in compartments in which GL-5 gear oils are required) 55 184-6021
Bulk 184-6020
Features 18 206-5210
Specially formulated for the final drives and differentials of Cat 20 184-8055
off-highway trucks, D6-D11 tractors and selected machine models 200 198-7672
Designed for protection of highly loaded gears and bearings 205 201-9855
208 184-8056
Benefit 1000 221-3445
Provides greater protection against pitting and scoring of gear teeth
and bearings than transmission and drive train oil 1200 202-9753 ID: D01381T1
Bulk 184-8054
Applications
Preferred synthetic final drive and axle oil for Cat machines
For off-highway trucks and track-type tractors subjected to severe Size
operating conditions in which mineral oil-based final drive lubricants (gal) (L) Part No.
experience high rates of oxidation and shorter life Cat FDAO SYN
Not for use in compartments in which GL-5 gear oils are required; SAE Oil Viscosity: Multi-Viscosity
not for use in compartments that contain brake or friction materials API/OEM Specification: Cat FD-1
5 208-2390
Features 55 198-7450
Reduces contact fatigue 18 206-5211
Protects against rust and copper corrosion 208 206-5212
Minimizes foaming
Benefits
Provides extended life capability when SOS Services is used ID: D01387T1
at 500 hour intervals
Extended gear and bearing life
Lubricants
ID: D01393T1
Cat GO
Applications
For use in the vibrator drum of soil compactors
For use in manual transmissions, axles, final drives and systems requiring API GL-5 oil
Features
Protects against rust and corrosion
Protects against scoring and pitting of gear teeth and rolling element bearings
Includes EP Extreme Pressure additive
Benefit
Provides excellent stability under high temperatures and superior performance under low temperature
ID: D01399T1
Size Size
(gal) (L) Part No. (gal) (L) Part No.
Cat GO Cat GO
SAE Oil Viscosity: 80W-90 SAE Oil Viscosity: 85W-140
API/OEM Specification: GL-5 API/OEM Specification: GL-5
5 8T-9582 5 9X-6185
15 8C-7398 4 7X-7618
30 8T-9583 18 133-9643
55 8T-9584 19 9X-8535
Bulk 155-6220 20 7X-7617
5 9X-6470 50 3E-8326
20 7X-7867 200 205-4312
60 7X-7887 205 7X-7616
208 9X-6469 209 133-9644
1000 119-5129 1000 7X-7615
1200 8C-9927 Bulk 7X-7614
2000 119-5144
Bulk 2P-9863
Cat Synthetic GO
Applications Size
Synthetic gear oil for specified Cat direct drive transmissions, differentials, (gal) (L) Part No.
final drives, and sealed and lubricated track joints Cat Synthetic GO
Recommended for all systems permitting the use of GL-5 multi-purpose SAE Oil Viscosity: 75W-140
type gear oil 5 242-3466
55 242-3467
Features Bulk 8C-3400
Good foam resistance
Cat Arctic GO
Compatibility with non-silicone seals and gaskets SAE Oil Viscosity: 75W-90
Excellent chemical and thermal stability 5 8C-3688
55 8C-3747
Benefits Bulk 155-6222
Uninterrupted performance under broad temperature variations
Bulk 5P-7040
Excellent protection against wearing and scoring caused by high speed ID: D01405T1
and heavy gear loads
Superior protection against rusting, staining and corrosion
Benefit
Reduces noise and chatter experienced by some Cat backhoe loaders
Size
Item (gal) (L) Part No.
Cat Backhoe Loader 0.250 (1 qt) 197-0017
Axle and Brake Oil Additive Bulk 185-0783
Cat Hydraulic Oil Additive 0.250 (1 qt) 1U-9891
Bulk 9X-2037
ID: D01411T1
Greases
ID: D01417T1
Multipurpose Grease
Application
For use in grease fittings and lubrication points in low load, low speed applications
Benefit Benefits
Exceptional general purpose grease Very water resistant
Longer lasting than regular molybdenum disulfide containing greases
White Assembly Grease NLGI Grade 2 Desert Gold Grease NLGI Grade 2
Size Size
(lb) (kg) Part No. (lb) (kg) Part No.
13 oz (aerosol) 129-1968 14 oz (cartridge) 397 g (cartridge) 129-1938
14 oz (cartridge) 397 g (cartridge) 129-1966 15.9 oz (cartridge)1 450 g (cartridge)1 129-1937
35 (plastic pail) 16 (plastic pail) 129-1969 35 (metal pail) 16 (metal pail) 129-1942
35 (plastic pail) 16 (plastic pail) 129-1941
120 (keg) 54 (keg) 129-1943
400 (drum) 181 (drum) 129-1944
3500 (tote) 1588 (tote) 129-1946
1 Australia
ID: D01429T1
Features
Provides an extra tacky hold to stick to open gears and bearings Arctic Platinum Grease NLGI Grade 0
Contains 5 percent molybdenum disulfide for extra high loads Size
(lb) (kg) Part No.
Benefits 35 (plastic pail) 16 (plastic pail) 129-8708
Exceptional water resistance 120 (keg) 54 (keg) 129-8709
Exceptional resistance to breakdown from mechanical working 400 (drum) 181 (drum) 129-8710
ID: D01519T1
Leak Detection
Oil Dyes
Highly concentrated oil soluble dyes for adding color to lubricating oils, transmission oils, hydraulic oils and fuels
Visible at concentrations of 1 part in 10,000 or more. It only takes 30 ml (1 oz) to color 473 l (125 gal)
of light color oil
Use it to color code oils to prevent mixups
Use it to identify the source of leaks when more than one source is possible
Hint: For sumps with dark colored oil, use oil dyes which are visible in black light (ultraviolet) such
as 1U-5572 through 1U-5575
Part No.
Part No. (EAME only) Color Size Qty.
9U-5031 185-4779 Red 240 ml (8 fl oz) 1
9U-5032 185-4781 Blue 240 ml (8 fl oz) 1
ID: C79584T1
Checks for surface cracks in ferrous and non-ferrous parts Cross Reference Chart for Liquid Penetrant Kit
with regular light
Cat/Crown Magnaflux Turco Min.
Contains no chlorene or sulphur bearing solvent Fault Spot By Sherwin Met-L- Ship.
Conforms to MIL-1-25135, RDT F-3-6T standard and other Description Finder Check Check Dubl-Check Check Qty.
military specifications Penetrant,
Simple and easy to use Aerosol 4C-4804 SKL-S By Check DP-40 VP-31 12 each
Developer,
Aerosol 4C-4805 SKD-NF By Check D-100 D-70 12 each
ID: C27233T1
Recommended
Part No. Description Size Dosage
To detect oil leaks in engines, transmission, hydraulic systems, etc.
1U-5572 Oil Glo 22 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 7.58 l (2 gal) of oil
1U-5573 Oil Glo 22 Additive 0.47 l (1 pt) bottle 28.4 g (1 oz) per 7.58 l (2 gal) of oil
To detect fuel leaks or suspected fuel dilution
1U-5574 Gas Glo 32 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 37.9 l (10 gal) of gasoline or diesel fuel
1U-5575 Gas Glo 32 Additive 0.47 l (1 pt) bottle 28.4 g (1 oz) per 37.9 l (10 gal) of gasoline or diesel fuel
To detect cooling system leaks, use:
1U-5576 Water Glo 23 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 151.6 l (40 gal) of water
1U-5577 Water Glo 23 Additive 0.47 l (1 pt) bottle 28.4 g (1 oz) per 151.6 l (40 gal) of water
Leak Detection
1U-5566 Black Light, 110 Volts
1U-6444 Black Light, 220 Volts
Handheld
An anodized aluminum lamp housing
Makes it easier and quicker to detect leaks in oil, fuel and cooling systems
Additives, available separately, can be put in the suspect system
and the leak point will show in the black light (ultraviolet light)
Instructions come with the kit
Also works with fluorescent penetrant kit
Optional light cover, made of heat-resistant neoprene rubber, helps protect ID: C41383T1
the user from possible burn injury, and also provides protection against
mechanical shock damage
Service Parts
Part No. Description
1U-5567 Black Light Filter
1U-5568 110V, 150 Watt Spot Bulb
Optional Items
1U-5571 Spectacles, Ultraviolet Light Absorbing
1U-5570 Storage Case (Heat Resistant)
1U-5569 Ultraviolet Light Cover
280-8147 120V/100 Watt Ultraviolet Spot Bulb, Medium Base, Average Intensity 7000 milliwatts
280-8144 120V/100 Watt Ultraviolet Spot Bulb, Ad Medium Base, Average Intensity 7000 milliwatts
Cleans parts of dust, dirt, grease, oil, and brake Leaves no residue
fluid residue Cleans and dries quicklyno need for rinsing
Non-chlorinated formula Will not cause corrosion
Fast acting cleaner for all metal parts Non-flammable material
Dries quickly
Low level of volatile organic chemicals Part No. Part No.
Approved for sale in California (NACD only) (LACD/APD/EAME only) Size
222-3124 222-3119 340 g (12 oz)
Part No. Part No.
(NACD only) (LACD/APD/EAME only) Size
222-3117 222-3118 340 g (12 oz)
For use in solvent stands, immersion tanks, and manual cleaning equipment Provides a hard film surface with good corrosion
Can be used with brush, rags, or spray and rust resistance
Has minimum flash point of 96C (205F) COC Protects equipment stored outside
High quality product with excellent solvency and is capable of being recycled Helps protect equipment used around salty environments
indefinitely through a solvent reclaiming still Provides protection in humid environments
If used in spray equipment, follow recommendations of spray equipment Size: 340 g (12 oz)
manufacturer
Always follow precautions from Material Safety Data Sheet Note: Read and follow all manufacturers directions
and safety precautions when using this product.
Part No.
Part No. (EAME only) Size Quantity
4C-6796 185-4756 18.93 l (5 Gal) 1
4C-6797 185-4757 208 l (55 Gal) 1
ID: D00671T1
ID: D00683T1
ID: D00653T1
ID: D00647T1
Dissolves and neutralizes battery acid and harmful Creates a protective coating, giving maximum battery
corrosion from all battery parts, terminals, cables, protection
hold-downs, and boxes Recommended for use on all battery installations
Recommended for all construction and industrial Keeps dirt and other contaminants from interfering
equipment batteries with the flow of power
Can be used on automobile, marine, and industrial batteries Prolongs battery, cable, and clamp life
Size: 340 g (12 oz) Size: 340 g (12 oz)
Caterpillar compressed air sprayeres use a special chemical-resistant internal seal 231-7016 Adjustable Tube
which virtually eliminates seal replacement problems found in standard sprayers 231-7017 Seal
Eliminate using flammable and/or environmentally dangerous propellants 231-7018 Nozzle
Canisters pressurized with compressed air from any standard air compressor
Both sprayers constructed with metal canisters (steel or brass), brass nozzles, and corrosion resistant internal parts
ID: D00593T1
Steel canister sprayers are used for oil and solvent-based materials while brass canisters can also be used
for water-based materials
Cannot be used for paint application
Capacity: 0.9 l (32 oz)
ID: C79591T1
Part No.
Part No. (EAME only) Size Quantity
4C-5591 N/A 113 g (4 oz) 12
ID: D01317T1 4C-5592 N/A 227 g (8 oz) 12
4C-5593 185-3989 1.13 kg (40 oz) 12
Part No.
Part No. (EAME only) Size Quantity
5P-8937 186-1529 142 g (5 oz) 1
5P-9210 N/A 397 g (14 oz) 1
ID: D00611T1
Part No.
Part No. (EAME only) Description Size Quantity
4C-5598 N/A Brush-top can 113 g (4 oz) 12
4C-5599 N/A Brush-top can 227 g (8 oz) 12
5P-3931 185-3990 Brush-top can 1.13 kg (40 oz) 12
222-3114 Aerosol 340 g (12 oz)
Part No.
Part No. (EAME only) Size Qty.
6V-4876 186-1531 500 g (17.6 oz) 1
ID: C79552T1
ID: C33339T1
Part No.
Part No. (EAME only) Size Qty.
6V-2055 186-1530 150 g (5.30 oz) 1 ID: C33340T1
Part No.
Part No. (EAME only) Size
151-1340 185-4002 9 ml (.33 fl oz)
For fan drive assemblies and clutches with viscous fluid drives Silicone grease
Extreme temperature resistance
Lubricant for rubber boots on Caterpillar flexible drive couplings
Part No. Qty. Size For Use In:
on marine engines
8M-0553 1 150 cc 8M-4665 Fan Drive Clutch
Not for use on silicone O-rings (yellow or white) or hoses
Equivalent to Schwitzer Part No. 136874
9M-5165 1 150 cc 2S-5562 Clutch Assembly
7M-3542 Clutch Assembly
9M-8437 Clutch Assembly
Equivalent to Schwitzer Part No. C-138868
4C-6508 1 300 ml 3600 Visconic Damper
Part No.
ID:Part
D01669T1
No. (EAME only) Size Qty.
5N-5561 186-1528 340 g (12 oz) 10
Specially formulated lubricants for use with R-134a Refrigerants 9U-7551 PAG Oil (185-5155 EAME only)
Size: 250 ml Polyalkylene glycol oil
Package quantity: 1 Low viscosity refrigerent oil for R-134a
4C-2959 PAG Oil (206-1990 EAME only) 4C-2960 POE Oil (185-5141 EAME only)
Polyalkylene glycol oil for Sanden compressors Polyol ester oil
High viscosity refrigerent oil for R-134a ISO viscosity 150 refrigerent oil for R-134a
Meets GM spec 9985752
See flushing unit operators manual for instructions on use 153-8538 185-5131 3.785 l (1 gal)
ID: C79518T1
ID: C79536T1
190-8487 Vacuum Pump Oil 2G-7781 Sealant for Liquid Filled Rims
SMCS Code: 4480-039
Model: Uninterruptable Power Supply (UPS) 250
on Wheel Loaders
Warranty: One Year
ID: C79599T1
ID: C79551T1
Specially formulated liquid that lubricates rubber so it is easy to install, remove, or otherwise manipulate
Unique featureits ability to provide temporary lubrication (Once the work with the rubber is complete, emulsion Part No.
rubber lubricant disappears and surfaces return to original condition.) Part No. (EAME only) Size
Provides high degree of lubricity while wet; stays wet long enough to complete the work, then its gone; contains 207-1601 207-1600 .95 l (1 quart)
no silicones or other persistent ingredients so lubricity goes away completely
Lubricated parts wont crumble, tear, or lose their elasticity; lubricant does not harm glass, metal, wood,
or other materials
Keep emulsion rubber lubricant out of freezing or near-freezing temperatures. In colder climates be especially
careful not to leave emulsion rubber lubricant in any unheated area for lengthy periods.
Part No.
Part No. (EAME only) Qty. Size
1U-8805 185-5125 4 3.79 l (1 gal)
1U-6516 N/A 1 18.9 l (5 gal)
ID: C33265T1
ID: C79570T1 1U-6517 N/A 1 208 l (55 gal)
Water soluble cutting oil, grinding fluid Use for storing vehicles and vehicle components such
and coolant as engines and transmissions for periods
Drilling, tapping, honing non-ferrous metals of up to one year
Grinding on crankshafts, etc. Protects all ferrous parts when maintained
at the proper concentration
Compounded for easy removal with no
in a closed container
troublesome residues
Has a vapor phase that is more strongly
Formulated with built-in biocide to contol
attracted to bare ferrous metals
bacteria that cause odors and dermatitis
than water
Will continue to perform indefinitely
as long as it stays sealed
in the compartment
Part No. Meets Mil-P-46002A
ID: C41309T1
Part No. (EAME only) Qty. Size
1U-8808 185-5126 4 3.79 l (1 gal) Reference
1U-6520 N/A 1 208 l (55 gal) SEHS9031 Special Instructions
ID: C44120T1l
Part No.
Part No. (EAME only) Qty. Description
4C-6792 N/A 12 .95 l (1 qt)
4C-6793 185-4769 4 3.78 l (1 gal)
4C-6794 185-4770 1 18.93 l (5 gal)
4C-6795 N/A 1 208 l (55 gal)
Special synthetic oil used in vibrator Water displacing rust preventive oil is more strongly
drum of Compactors attracted to bare metal than water
Packaged in 20 l (5 gal) pails Apply by dipping, brushing, or spraying
- Large machines take 20 l (5 gal) per drum Leaves a long lasting, rust preventive film
- Small machines take 10 l (212 gal) per drum that protects against rusting for a year
in covered storage conditions
Should be protected from dirt and dust
accumulation to prolong its effectiveness
Long lasting, heavy-duty waxy film Proven efficiency in factory and service shop
Apply by dipping, brushing, or spraying Cuts faster and gives superior finish
Leaves a long lasting, rust preventive film that Pre-mixed, ready to use as it comes from
protects from damage by outside condensation, the container
rainfall, etc. up to a year Available in convenient sizes
Must be removed by solvent or hot Hint: to avoid problems from abrasive
alkaline cleaner settling out, order smaller containers
and rotate your stock to use oldest
stock first
Part No.
Part No. (EAME only) Qty. Size
1U-8801 185-5123 4 3.79 l (1 gal) ID: C79578T1
1U-6526 N/A 1 208 l (55 gal)
Part No.
Part No. (EAME only) Size Qty. Grit
ID: C44119T1
226-6624 N/A 240 ml (8 fl oz) 1 80
4C-4178 185-5156 3.79 l (1 gal) 1 40
4C-4179 N/A 18.9 l (5 gal) 1 40
4C-4180 N/A 208 l (55 gal) 1 40
Retains O-rings in the groove in O-ring face seal (ORFS) fittings during assembly
Holds in both horizontal and vertical positions
Non-toxic
Will not harm hydraulic system components
Not for use on air conditioning systems
Part No.
Part No. (EAME only) Size Qty.
1U-6396 185-4776 12 236 ml (8 fl oz)
1U-6395 185-4777 4 3.79 l (1 gal)
ID: C79597T1
Governor Oil
Model: 3600 Engine
Part No.
Part No. (EAME only) Qty. Size
For 3600 Engine Woodward Governor 136-9642 185-4775 1 .95 l (1 qt)
ID: C79527T1
ID: C79569T1
Oil Stabilizer
ID: C79574T1
ID: C44249T1
Calibration Fluid
ID: C44121T1
Specialty Products
ID: C79520T1
Part No.
Part No. (EAME only) Size Qty.
2P-2333 207-7529 473 ml (16 fl oz) 1
ID: C33328T1
Ether Cylinder
7X-1062
Fits most 3500 series engine applications ID: C44122T1
Comes with specially designed filter and foam disc collar to keep impurities out of the system
Fill seams and holes in fuel tanks For gas engines, removes water from fuel lines,
For temporary in field repairs prevents rust and corrosion
Hardens in 15 minutes
Will adhere to fuel
wetted surfaces Pkg.
Part No. Size Qty.
Also see 1U-8118 Fuel Tank
269-8292 0.35 l (12 oz) bottle 24
Repair Kit
for Plastic Fuel Tanks
Size: 7 g (.25 oz)
Quantity: 10
ID: C33327T1
ID: D01657T1
Specialty Products
ID: D01651T1
ID: C44041T1
Excellent hand cleaning for dirty, oily, greasy hands. For exceptionally dirty Part No.
or greasy hands, use Hand Cleaner with Pumice. Part No. (EAME only) Description Size Qty.
Mild citrus smell 9U-5026 N/A Orange Hand 225 ml (7.5 fl oz) 12
Contains Corn Huskers Lotion, aloe, lanolin and jojoba to help prevent dermatitis Cleaner (smooth)
Contains NO petroleum solvents 9U-5027 185-4000 Orange Hand 3.8 l (1 gal) 4
Biodegradable Cleaner (smooth)
Works with or without water 9U-5028 N/A Orange Hand 225 ml (7.5 fl oz) 12
Cleaner (w/ pumice)
9U-5029 185-4001 Orange Hand 3.8 l (1 gal) 4
Cleaner (w/ pumice)
9U-5030 Wall Mount Bracket 1
for 1 gal container
All 1 gallon jugs come with individual pumps included. 7.5 fl.oz. bottles have
self-sealing flip top caps.
Heavy-duty hand cleaner for oil, grease, tar, grime, soil, Item Part No. Description Size
resins, printers ink, epoxies, paint, and cements
1 191-6310 Heavy-Duty Hand Cleaner 15 oz
Works faster than standard orange hand cleaner
2 191-6311 Heavy-Duty Hand Cleaner 128 oz
Fine ground pumice provides a deep scrubbing action
to remove difficult grease and grime
Pleasantly scented, containing lanolin and aloe
Will not irritate most hands and does not leave
a greasy residue
ID: C80422T1
Part No. Towel Size Quantity Units per case Minimum purchase
144-3393 266 x 311.2 mm 72 per bucket 6 1 case
(10.5 x 12.25 in)
144-3394 203 x 311.2 mm 250 per display 250 count counter display
(8.0 x 12.25 in) and one bucket
ID: C79348T1
Gojo Lemon with Pumice Hand Cleaner Zep Cherry Bomb Hand Cleaner
Removes grease, tar, and oil from hands, Multipurpose cherry-scented hand cleaner
with or without water for dirt, grease, and oils
Pkg. Pkg.
Part No. Size Qty. Part No. Size Qty.
269-1937 2.04 kg (4.5 lb) 4 269-1939 3.79 l (1 gal) plastic jug 4
plastic bucket
Specialty Products
Package Package
Part No. Size Quantity Part No. Size Quantity
269-8271 0.45 kg (1 lb) box 1 269-1948 4.54 l (1.2 gal) plastic jug 1
Effective to temperatures of -15 C (5 F) Melts 3 times more ice than competition at rate
Screened for uniform crystal size of 0.059-0.12 l (2-4 oz) per 0.84 square meter (1 sq yd)
Effective to -45.55 C (-50 F)
Package
Part No. Size Quantity
Package
269-1941 22.68 kg (50 lb) yellow poly bag 1 Part No. Size Quantity
269-1950 45.36 kg (100 lb) carton 1
Sprays up to 6.7 m (22 ft) Intensely blue, soft, uniform paste that spreads easily
Non-conductive up to 32,500 volts and evenly to show high spots on bearings
From the suppliers of Raid Used on flat bearing surfaces of lathes, planers,
and milling machines
Package
Part No. Size Quantity Package
269-1942 0.41 l (14 oz) aerosol can 12 Part No. Size Quantity
280-1555 15.59 g (0.55 oz) tube 36
ID: D01639T1
Paints
Pure, lead free industrial enamel suitable for interior or exterior use on earthmoving,
construction and material handling equipment, trucks, engines, machinery, and metal buildings
Formulated to produce a finish that sets up in minutes, is tack-free in a few hours,
and dries overnight to a hard film
Very resistant to fading, chalking, cracking, and chipping
Can be applied directly to either wood or metal without using a primer
Package
Part No. Description Quantity Size / Type
261-7012 1 Yellow Paint High Heat, High Gloss 12 340 g (12 oz) Aerosol Can
4C-4200 Yellow Paint High Gloss 12 340 g (12 oz) Aerosol Can
206-6417 Hiway Yellow Paint High Gloss 12 340 g (12 oz) Aerosol Can
4C-4202 Mojave Brown Paint Medium Gloss 12 340 g (12 oz) Aerosol Can
243-5451 Power Module White Paint High Gloss 12 340 g (12 oz) Aerosol Can
4C-4198 Black Paint Medium Gloss 12 340 g (12 oz) Aerosol Can
4C-5842 Black Paint Flat 12 340 g (12 oz) Aerosol Can
4C-5843 Black Paint High Gloss 12 340 g (12 oz) Aerosol Can
9U-7946 Bright Beige Paint Medium Gloss 12 340 g (12 oz) Aerosol Can
9U-7948 Dawn Gray Paint Medium Gloss 12 340 g (12 oz) Aerosol Can
9U-7950 Green Paint High Gloss for Barber-Greene Equipment 12 340 g (12 oz) Aerosol Can
127-4966 Dark Gray Paint Medium Gloss 12 340 g (12 oz) Aerosol Can
127-4967 Slate Gray Paint High Gloss 12 340 g (12 oz) Aerosol Can
140-2576 Matterhorn White Paint High Gloss 12 340 g (12 oz) Aerosol Can
173-4060 Charcoal Gray Paint High Gloss 12 340 g (12 oz) Aerosol Can
243-5459 Cat Gray 61 Paint High Gloss 12 340 g (12 oz) Aerosol Can
261-7013 1 Yellow Paint, High Heat, High Gloss 4 3.8 l (1 Gal) Can
4C-4184 Yellow Paint High Gloss Fast Drying 4 3.8 l (1 Gal) Can
4C-4192 Yellow Paint High Gloss Fast Drying 1 19 l (5 Gal) Pail
4C-4207 Yellow Paint High Gloss Fast Drying 1 208 l (55 Gal) Drum
4C-6129 Yellow Paint High Gloss 4 3.8 l (1 Gal) Can
4C-6122 Yellow Paint High Gloss 1 19 l (5 Gal) Pail
4C-6127 Yellow Paint High Gloss 1 208 l (55 Gal) Drum
4C-4185 Hiway Yellow Paint High Gloss 4 3.8 l (1 Gal) Can
4C-4193 Hiway Yellow Paint High Gloss 1 19 l (5 Gal) Pail
4C-4208 Hiway Yellow Paint High Gloss 1 208 l (55 Gal) Drum
4C-4186 Mojave Brown Paint Medium Gloss 4 3.8 l (1 Gal) Can
243-5450 Power Module White Paint High Gloss 4 3.8 l (1 Gal) Can
249-1817 Power Module White Paint High Gloss 1 19 l (5 Gal) Pail
4C-4183 Black Paint Medium Gloss 4 3.8 l (1 Gal) Can
4C-4191 Black Paint Medium Gloss 1 19 l (5 Gal) Pail
4C-4206 Black Paint Medium Gloss 1 208 l (55 Gal) Drum
9U-7947 Bright Beige Paint Medium Gloss 4 3.8 l (1 Gal) Can
9U-7949 Dawn Gray Paint Medium Gloss 4 3.8 l (1 Gal) Can
243-5458 Cat Gray 61 Paint High Gloss 4 3.8 l (1 Gal) Can
9U-7951 Green Paint High Gloss for Barber-Greene Equipment 4 3.8 l (1 Gal) Can
Paints
For professional or industrial use only Excellent solvent to be used with Caterpillar enamel paint and primer
Add to 9U-7721 Caterpillar Yellow Urethane Paint Leaves the film quickly and will not impair the setting-up or tack-free time
in a 3:1 paint to hardener ratio of the enamel or primer paint
Faster drying time Evaporates fast and is less likely to cause sagging and running
Enhances gloss, durability, and chemical resistance Because of its high solvency, a relatively small amount of thinner is needed
Used by professional painters to reduce paint to a spray consistency
Automotive-quality product line
Follow Caterpillar label directions for use: Package
Mix paint and hardener thoroughly before application Part No. Description Quantity Size / Type
DO NOT mix more than will be used within a 3-hour period 4C-4189 Paint and Primer Thinner 6 3.8 l (1 Gal) Can
DO NOT use paint that has started to thicken; high temperature will reduce 4C-4196 Paint and Primer Thinner 1 19 l (5 Gal) Pail
pot life of paint 4C-4210 Paint and Primer Thinner 1 208 l (55 Gal) Drum
Package
Part No. Description Quantity Size / Type
9U-7723 Urethane Hardener 4 3.8 l (1 Gal) Container
Quickly removes paint, decals, varnishes, lacquers, enamels, and synthetic Formulated to resist temperatures up to 538C (1000F)
finishes on wood and metal without damaging the surface
Once properly cured, forms a hard, lasting finish that resists salt spray
Lower Variable Organic Compound (VOC) formula and will not chip or peel
Formulated to be used as packaged no further dilution is required Ideal for use on mufflers, exhaust systems, or any surface exposed to very
Do not use on plastics, vinyl, linoleum, fiberglass, or synthetic fibers high heat
Package Package
Part No. Description Quantity Size / Type Part No. Description Quantity Size / Type
263-6148 Paint and Decal Remover 12 340 g (12 oz) Aerosol Can 4C-4199 Black Muffler Paint 12 340 g (12 oz) Aerosol Can
263-6151 Paint and Decal Remover 6 3.8 l (1 gal) Can
Caterpillar Aluminum-Safe
Paint Stripper
Package
Part No. Description Quantity Size / Type
4C-8651 Aluminum-Safe Paint Stripper 4 3.8 l (1 gal)
4C-8652 Aluminum-Safe Paint Stripper 1 18.9 l (5 gal)
4C-8653 Aluminum-Safe Paint Stripper 1 208 l (55 gal)
Nomenclature Index
A ACCESSORY
ADAPTER GROUP
BEARING
2-49, 2-113
2-7, 2-10
1-48, 1-59
OIL
PAINT
PAINT PRODUCTS
3-26
3-38
3-25, 3-38
DIFFERENTIAL
DISASSEMBLY TOOL
DISPENSER KIT
1-8
1-16
3-31
ABRASIVE BOX WRENCH 1-59 PAINT REMOVER 3-40 DRIVE 1-16
ADAPTER 2-8 BUSHING 1-48 PENETRANT 3-23 GAUGE GROUP 1-8
BELT 2-24 CARRYING CASE 2-110 PENETRANT FOR CRACK HEX BIT SET 1-15
BRUSH 2-4, 2-11, 2-18 CYLINDER 1-22 to 23 DETECTION 3-23 HYDRAULIC 1-16
CLEANING 2-19 DISC 2-16 to 17 PENETRATE OIL 3-26 HYDROSTAT 1-8
CRANKSHAFT 2-24 DRIVER 1-59 RUST PENETRATING 3-26 LIFTING 1-88
CUT-OFF WHEEL 2-20 ELECTRICAL PRODUCT 2-110 RUST PREVENTIVE 3-26 O-RING 3-31
CUTTING 2-20 FLUID EXTRACT TOOL 2-49, 2-113 SOLVENT 3-25 PLUG 2-49
DEBURRING 2-26 FLUID SAMPLING 2-49, 2-113 PRESSURE 1-8
DISC 2-6, 2-10, 2-12 to 14 FLYWHEEL 1-39 AIR CONDITION TOOL PUMP 1-16
EMERY PAPER 2-23 GRINDING 2-16 to 17 AIR CONDITIONING 3-29 SEAL 2-49
FILE 2-27 HAND TOOL 1-1 to 2, 1-5 to 6, 1-9, 1-12, FLUSHING 3-29 SLING 1-88
FLAP BRUSH 2-5 1-15, 1-22, 1-48, 1-54, 2-18 SOLVENT 3-29 SOCKET 1-15 to 16, 1-31
FLAP WHEEL 2-18 to 19 HOLDER 2-16 to 17 SOCKET WRENCH 1-43
GRINDING 2-13, 2-17 to 20 HYDRAULIC 1-22 to 23 AIR CONDITIONING TESTING 1-8
GRINDING WHEEL 2-17 MAIN BEARING 1-59 AIR CONDITION TOOL 3-29 TRANSMISSION 1-88
HOLDER 2-11 MAIN CAP 1-59 AIR TOOL OIL 3-29 TRANSPARENT 2-49
MANDREL 2-20 MANDREL 2-16 to 17 COMPRESSOR 3-29 WRENCH 1-43
PAD 2-15, 2-22 MICROFILM VIEW 2-110 FLUSHING 3-29
POLISHING 2-24 MULTIPLIER 1-22 to 23 PUMP OIL 3-29 ATTACHMENT
RECONDITIONING 2-12 OIL 2-49, 2-113 REFRIGERANT 3-29 BRACKET 2-90
SANDING 2-15, 2-22, 2-24 OPEN END WRENCH 1-12 SOLVENT 3-29 HARD HAT 2-90
SURFACE RECONDITIONING 2-3 to 6, PIN REMOVER 1-48 VACUUM PUMP 3-29
2-10 to 14, 2-17 to 20, RACE 1-48 AXLE
2-22, 2-24, 2-26 REDUCER 2-49, 2-113 AIR POWERED DRIVE LINE 1-31
VALVE STEM 2-18 REPAIR 1-22 to 23 ADHESIVE & SEALANT 3-7
WHEEL 2-17 to 20 REPAIR PART 1-12, 1-39 CAULKING 3-7
WIRE BRUSH 2-3 to 4 SERVICEMANS HAND TOOL 1-1 to 2,
1-12, 1-22
CLEANING
GUN
1-73 to 74
1-73 to 74, 3-7
B
ACCESSORY SOCKET 1-1 to 2, 1-5 to 6, 1-9, PNEUMATIC 1-73 to 74 BALLAST
ADAPTER 2-49, 2-113 1-15, 1-22, 1-54 PNEUMATIC TOOL 1-73 to 74 CHOP SAW 2-72
AIR 1-73 STAND 1-22 to 23 ELECTRIC LIGHT 2-72
BOX 1-85 SURFACE RECONDITIONING 2-16 to 18 ALKALINE FLUORESCENT LIGHT 2-72
CABINET 1-79 TOOL 1-59 ALUMINUM SAFE 3-10 LIGHT 2-72
CASE 1-85 TOOL GROUP 2-18 CABINET WASHER 3-10 PORTABLE LIGHT 2-72
DISC 1-73 TOOL SET 1-1 to 2, 1-12, 1-22 CHEMICAL 3-10 TUBE 2-72
DRILL 2-21, 2-30 TORQUE 1-22 to 23, 1-59 CLEANING 3-8, 3-10, 3-25 WORK LIGHT 2-72
DRILL SHARPENING 2-21 TORQUING TOOL 1-59 CONCENTRATE 3-10
EXTENSION 2-30 TRANSFORMER 2-110 DEGREASER 3-10, 3-25 BAR
FLOOR MAT 2-110 WHEEL 2-16 to 17 DETERGENT 3-8, 3-10, 3-25 BLADE 1-46
FLUID EXTRACT TOOL 2-49, 2-112 to 114 WRENCH 1-12, 1-59 HYDROSOLV CLEANER 3-10 BREAKER BAR 1-1 to 9, 1-12, 1-20, 1-46
FLUID SAMPLING 2-49, 2-112 to 114 PRESSURE WASHER 3-10 CROW BAR 1-2 to 9, 1-46
GRINDING 1-73, 2-21 ADHESIVE RUST PROTECTION 3-8, 3-25 HAND TOOL 1-6, 1-9
HAND OPERATED 1-73 ADHESIVE & SEALANT 3-1, 3-4 to 5 SOAP 3-10, 3-25 JIMMY BAR 1-2 to 9, 1-46
HAND TOOL 1-64 APPLICATOR 3-5 PRY BAR 1-1 to 9, 1-12, 1-20, 1-46
HOSE 1-73 BONDING 3-1, 3-4 to 5, 3-7 to 8, 3-34 ALLEN WRENCH REACTION 1-34
HYDRAULIC 1-64 CAULKING 3-7 to 8 HAND TOOL 1-3, 1-6, 1-8 to 9, SERVICEMANS HAND TOOL 1-1, 1-3,
HYDRAULIC WRENCH 1-63 CHEMICAL 3-7 to 8, 3-21, 3-31 1-42 to 43 1-12, 1-20
INSERT 2-56 COMPOUND 3-31 HEX BIT SET 1-3, 1-15, 1-42 SOCKET 1-43
JAW CAP 2-57 EPOXY 3-34 HEX KEY WRENCH 1-6, 1-9, 1-15, 1-43 TOOL SET 1-1, 1-3, 1-12, 1-20
JAW INSERT 2-56 to 57 FLEXIBLE 3-6 WRENCH 1-3, 1-8 to 9, 1-42 TORQUE 1-61
LIFTING 1-8, 1-89 FUEL TANK REPAIR KIT 3-34 WRENCH 1-43, 1-61
MUD FLAP 2-112 GASKET MATERIAL 3-6 ALUMINUM
O-RING SEAL 2-49, 2-112 to 114 HEAT 3-8 TAPE 2-118, 2-125 BASE
OIL 2-49, 2-112 to 114 LAPPING 3-31 HAND TOOL 1-85
PIPE VISE 2-56 LAPPING COMPOUND 3-31 AMMETER MULTIPLIER 1-23
PLATE 1-89 LIQUID GASKET 3-6 CARRYING CASE 1-85 UNIT 1-23
REACTION ARM 1-63 LUBRICANT 3-7 to 8, 3-21, 3-31 CASE 1-85
REDUCER 2-49, 2-113 MIXER 3-5 DIAGNOSTIC 1-85 BATTERY
REPAIR PART 2-49, 2-112 to 114 NOZZLE 3-5 MEASURING 1-85 AEROSOL 3-26
SEAL 2-49, 2-112 to 114 NYLON 3-34 PLASTIC CASE 1-85 AUTOMOTIVE 2-65
SHACKLE 1-8, 1-89 PRIMER 3-8 REPAIR PART 1-85 BATTERY POST SET-POS/NEG 2-62
SHOP 2-110 SEALANT 3-3 to 6, 3-8, 3-34 BATTERY STARTING SYSTEM 2-61 to 63
SLING 1-8, 1-89 SILICONE 3-7 to 8 ANTI-FREEZE BOOSTER 2-61 to 63
STAINLESS STEEL 1-79 WINDOW 3-8 ADDITIVE 3-12 BOOSTER CABLE BATTERY 2-61 to 62
STORAGE 1-85 WINDOW INSTALLATION 3-8 ANTI-FREEZE ADDITIVE 3-12 BULB 2-67 to 68
SURFACE RECONDITIONING 1-73, 2-21 WINDSHIELD 3-7 to 8 ANTI-FREEZE CONCENTRATE 3-12 CABLE 2-61 to 63
TOOL STORAGE 1-79 CHEMICAL 3-35 CLAMP 2-61 to 62
VISE 2-56 to 57 AEROSOL COOLANT 3-12 to 13 CLEANING 3-26
WHEEL 2-21 BATTERY 3-26 DISTILLATION 3-12 COMMERCIAL 2-65
WRENCH 1-64 CABLE 3-26 HOSE 3-35 CORDLESS 1-75 to 76
CHAIN 3-26 PNEUMATIC 3-35 DIAGNOSTIC 2-69
ACID CLEANING 3-26 PNEUMATIC TOOL 3-35 ELECTRICAL PRODUCT 2-68 to 69
COIL CLEANER 3-10 COMPOUND 3-40 EXTRA HEAVY DUTY 2-63
DESCALANT 3-10 CRACK DETECTION 3-23 APPLICATOR FLASHLIGHT 2-67 to 69
HYDROSOLV CLEANER 3-10 DETECTION 3-23 ADHESIVE 3-5 GREASE GUN 1-57
PHOSPHORIC 3-10 DEVELOPER 3-23 INSPECTION LIGHT 2-68 to 69
PRESSURE WASHER 3-10 DEVELOPER FOR CRACK ASSEMBLY JUMPER CABLES BATTERY 2-61
SCALE 3-10 DETECTION 3-23 BRAKE 2-49 LAMP 2-67 to 68
INSPECTION 3-23 CLUTCH 3-28 LEXAN PLUG STARTING SYS 2-62
ADAPTER LIQUID PENETRANT KIT 3-23 COMPOUND 3-31 LIGHT 2-68 to 69
ABRASIVE 2-8 LUBRICANT 3-26 COUPLING 1-8 LIGHTING 2-70
Nomenclature Index
Nomenclature Index
Nomenclature Index
HEAT TRANSFER 3-27 BOX 1-83 TAP OIL 3-30 THREAD RESTORATION 2-34
LAPPING 3-31 CABINET 1-80 THREADING OIL 3-30 THREADED 2-33
LAPPING COMPOUND 3-31 CONTAINER 2-115
LUBRICANT 3-31 DRUM COVER 2-115 CYLINDER DIE SET
O-RING 3-31 HYDRAULIC 2-50 ADAPTER 1-22 to 23 CASE 2-33
PAINT REMOVER 3-40 PLEXIGLASS 1-83 BOLT 2-128 to 129
REPAIR KIT 3-1, 3-3 POWER TRAIN 1-83 BRAKE 1-33 DISC
RUBBER 3-31 REPAIR BOX 1-83 BRUSH 2-4 ABRASIVE 2-6, 2-10, 2-12 to 14
SEALANT 3-1, 3-3 STORAGE 1-80 CHAIN 1-40 ACCESSORY 1-73
SEMI-CONDUCTOR 3-27 TEST GROUP 2-50 CHAIN WRENCH 1-40 ADAPTER 2-16 to 17
SILICONE 3-27 TESTING 2-50 CLAMP 2-129 AIR 1-73
TOOL BOX 1-80 DIFFERENTIAL 1-40 CLEANING 2-9
COMPRESSOR TRANSMISSION 1-83 HANDLE 1-40 ENGINE TOOL 2-8, 2-10 to 11, 2-13
AIR CONDITIONING 3-29 VEHICLE SYSTEM TOOLS 2-50 HITCH 1-33 FIBER 2-12 to 13
AIR TOOL OIL 3-29 WAREHOUSE EQUIPMENT 1-83 HYDRAULIC 1-22 to 23, 1-40, 2-128 GRINDING 1-73, 2-11, 2-13, 2-16 to 17
BLOCK 1-85 HYDRAULIC CYLINDER 2-129 HAND OPERATED 1-73
CASE 1-85 COVER-ALLS LOCKNUT 1-40 HOLDER 2-7 to 10, 2-16 to 17
GROUP 1-85 TYVEK COVERALLS 2-91 MULTIPLIER 1-22 to 23 HOOK AND LOOP 2-15
PUMP OIL 3-29 PIN 1-40 HOSE 1-73
REFRIGERANT 3-29 CRACK REPAIR PINION 1-40 IDLER 2-9
VACUUM PUMP 3-29 SALVAGE 1-78 REPAIR 1-22 to 23 LIFT CYLINDER 2-9
REPAIR PART 2-128 LINK 2-9
CONNECTOR CRANKSHAFT SOCKET 1-33 MANDREL 2-8 to 11, 2-16 to 17, 2-22
BOX 1-86 ABRASIVE 2-24 STAND 1-22 to 23 MAST 2-9
CASE 1-86 BELT 2-24 SURFACE RECONDITIONING 2-4 METAL 2-9
ELECTRICAL 2-75, 2-77 BRACKET 1-88 THREADED 1-40 P.S.A. 2-14 to 15
PLUG 2-75 DAMPER 3-28 TORQUE 1-22 to 23 PAD 2-7 to 8, 2-10 to 11, 2-13
SHRINK TUBING 2-77 ENGINE TOOL 1-88, 3-28 POLISHING 2-13, 2-24
STORAGE 1-86 POLISHING STAR 2-13, 2-24
SUPPLY
SURE SEAL
2-75
1-86
GEAR
GUIDE
HOIST
2-40
2-40
1-88
D RECONDITIONING
SANDING
2-9
2-15
HYDRAULIC 2-40 DAMPER SHAFT 2-8, 2-10 to 11
CONTAINER LINK 1-88 CRANKSHAFT 3-28 SURFACE RECONDITIONING 1-73,
BARREL 2-115 POLISHING 2-24 ENGINE TOOL 3-28 2-6 to 17, 2-22, 2-24
COVER 2-115 PULLER 2-40 REPAIR GROUP 3-28 THREADED 2-8, 2-10 to 11
DRUM COVER 2-115 REPAIR GROUP 3-28 TUBE 3-28 UNDERCARRIAGE 2-9
DRUM CRADLE 2-115 SANDING 2-24 VIBRATION 3-28 WHEEL 2-16 to 17
DRUM FILTER 2-115 SURFACE RECONDITIONING 2-24
DRUM HANDLER 2-115 TUBE 3-28 DIAGNOSTIC DISPENSER
DRUM TILTER 2-115 VIBRATION 3-28 ADHESIVE & SEALANT 1-85 CLEANING 2-106 to 107
FLAMMABLE 2-115 AMMETER 1-85 MAINTENANCE AIDS 2-106 to 107
FUNNEL 2-115 CUP BATTERY 2-69 PACKAGING 2-120
SAFETY CAN 2-115 HAND TOOL 1-54 BLACK LIGHT LEAK DETECTION 3-24 PAPER PRODUCT 2-106 to 107
SOLVENT CAN 2-115 PAPER PRODUCT 2-108 BOLT 2-128 PAPER TOWEL 2-106 to 107
STORAGE CAN 2-115 PICK 1-54 CARRYING CASE 1-85, 3-24 STRETCH FILM 2-120
TOOL BOX 1-84 SEAL 1-54 CASE 1-85 TAPE 2-119
WATER RESISTANT 1-84 SEAL PICK 1-54 COOLANT 3-24 WIPES 2-106 to 107
SERVICEMANS HAND TOOL 1-54 COOLING SYSTEM 3-24 WYPALLS 2-106 to 107
COUPLER DYE 3-23 to 24
COUPLING 1-56 CUTTER BIT ELECTRIC 3-24 DISPLAY
GREASE GUN 1-56 PNEUMATIC TOOL 1-72 ELECTRICAL PRODUCT 2-69 AIR 1-73
LUBE EQUIPMENT 1-56 FILTER 3-24 HAND TOOL 1-43
LUBRICATION 1-56 CUTTING FLASHLIGHT 2-69 HOSE 1-73
NIPPLE 1-56 ABRASIVE 2-20 FLUORESCENT 3-24 SERVICEMANS HAND TOOL 1-43
NOZZLE ASSEMBLY 1-56 CUTTING TORCH 2-48 FUEL PUMP TOOL 1-85 SHOP 1-73
REPAIR PART 1-56 HAND TOOL 1-40, 1-51 FUEL SYSTEM TOOL 1-85 TOOL SET 1-43
TORQUE 1-61 HOLDER 2-9 INSPECTION 3-23 to 24
WRENCH 1-61 IGNITOR 2-48 INSPECTION LIGHT 2-69 DIVIDER
ZERK ADAPTER 1-56 LIFT CYLINDER 2-9 LEAK DETECTION 3-23 to 24 CASE 1-85
MAST 2-9 LEATHER JACKET 3-24 DIVIDER KIT 1-85
COUPLING METAL 2-9 LIGHT 2-69, 3-24 STORAGE 1-85
ASSEMBLY 1-8 MINI CUTTING TORCH 2-48 LUBRICANT 3-23 to 24
COUPLER 1-56 PIPE CUTTER 1-51 MEASURING 1-85, 2-69 DRILL
DIFFERENTIAL 1-8 PNEUMATIC 1-72 OIL 3-23 to 24 ACCESSORY 2-21, 2-30
GAUGE GROUP 1-8 PNEUMATIC TOOL 1-72 PERSONAL USE 3-24 AIR 1-71
GREASE GUN 1-56 POLISHING 2-22 PLASTIC CASE 1-85 AIR REGULATED 2-30
HOSE ASSEMBLY TOOL 1-56 RECONDITIONING 2-9 RADIANT HEATER 3-24 AIRCRAFT DRILL 2-30
HYDROSTAT 1-8 ROD 2-48 REPAIR PART 1-85 BIT 2-28 to 30, 2-38 to 39, 2-41 to 42, 2-46
LUBE EQUIPMENT 1-56 SERVICEMANS HAND TOOL 1-51 SAFETY GLASSES 3-24 CHARGER 1-75 to 76
LUBRICATION 1-56 SHIELD 2-48 SERVICE PART 1-85 CHUCK 1-71
NIPPLE 1-56 SPACER 1-40 SERVICE TOOL 3-29 COBALT DRILL 2-29
NOZZLE ASSEMBLY 1-56 STRIKER PLATE 2-48 TACHOMETER 2-128 CORDLESS 1-75 to 76
ORIFICE 2-35 SURFACE RECONDITIONING 2-9, 2-20, ULTRA-VIOLET CRACK DETECTION 3-23 DRILL SET 2-29
PIPE 2-35 2-22 to 24 DRILL SHARPENING 2-21
PLUG 2-35 TUBING CUTTER 1-51 ULTRA-VIOLET LEAK DETECTION 3-24 ELECTRIC 1-75 to 76
PRESSURE 1-8 WHEEL 1-51, 2-20 UNIT INJECTOR TOOL 1-85 ENGINE TOOL 2-28
REPAIR PART 1-56 WATER SOLUBLE OIL 3-24 EXTENSION 2-30
REWORK 2-35 CUTTING OIL EXTRA HEAVY DUTY 1-76, 2-29
TAP 2-35 CHEMICAL 3-30 DIE GRINDING 2-21, 2-25
TAPER 2-35 LUBRICANT 3-30 LINKAGE 2-33 GUIDE 2-40
TESTING 1-8 MACHINING OIL 3-30 LOADER 2-33 HAND OPERATED 1-46
ZERK ADAPTER 1-56 MAINTENANCE AIDS 3-30 METRIC 2-33 to 34 HAND TOOL 1-46
OIL 3-30 PIPE 2-33 IMPACT 1-75 to 76
COVER PIPE THREADING OIL 3-30 STANDARD 2-33 to 34 METRIC 2-30, 2-41 to 42
BARREL 2-115 THREAD 2-33 MOBILE 1-76
Nomenclature Index
Nomenclature Index
FLYWHEEL REPAIR PART 2-128 PULLER 2-40 ELECTRIC POWER TOOL 1-75
ADAPTER 1-39 TESTING 1-8, 2-128 TAP 2-40 ENGINE 1-23
ENGINE TOOL 1-1, 1-4, 1-14, 1-18 ENGINE TOOL 1-1 to 6, 1-8 to 10,
REPAIR PART 1-39 GEAR GUN 1-12 to 14, 1-17, 1-20 to 23
RETAINING 1-1, 1-4, 1-14, 1-18 CRANKSHAFT 2-40 ADHESIVE & SEALANT 3-7 EXTENSION 1-1 to 2, 1-10,
SOCKET 1-1, 1-4, 1-14, 1-18 GUIDE 2-40 AIR POWERED 1-73 to 74, 3-7 1-15, 1-21 to 23
HYDRAULIC 2-40 CABLE TIE 2-124 EXTENSION NOZZLE 1-2, 1-9, 1-21, 1-34
FOAM LUBRICANT 3-19 to 20 CAULKING 3-7 F.T. 1-1, 1-5, 1-22, 1-54
BLOCK 1-61, 1-85 OIL 3-19 to 20 CLEANING 1-73 to 74 FEELER GAUGE 1-53
BOX 1-85, 1-87 PULLER 2-40 COLLECTOR 1-74 FIELD USE 1-5, 1-7 to 8
CASE 1-61, 1-85, 1-87 EXTENSION 1-74 FILTER 1-40
HYDROSTAT 1-85 GLASSES GREASE GUN 1-4 to 9, 1-56 FINAL DRIVE 1-22
INSERT 1-61, 1-85, 1-87 EYE GUARD 1-3, 2-85, 2-87 LEVER GUN 1-4 to 9, 1-56 FLEXOMETER 1-3, 1-49 to 50
LINER 1-85 EYE PROTECTION 1-3, 2-85, 2-87 LUBE EQUIPMENT 1-4 to 9, 1-56 FOAM PAD 1-83
PACKING 1-85 PROTECTION 2-81 LUBE GUN 1-4 to 9, 1-56 FORK 1-48
PADDING 1-61, 1-85, 1-87 SAFETY 1-3, 2-85, 2-87 PNEUMATIC 1-73 to 74 FRAME & HITCH TOOL 1-19, 1-39
POWER TRAIN TOOL 1-85 SAFETY GLASSES 1-3, 2-85 to 87 PNEUMATIC TOOL 1-73 to 74 FUEL LINE 1-36
PROTECTOR 1-87 TIGHTENER 2-124 FUEL PUMP TOOL 1-36
REPAIR PART 1-61, 1-85 GLOVES VACUUM 1-74 FUEL SYSTEM TOOL 1-36
REPLACEMENT 1-87 BEAD BLAST EQUIPMENT 2-96 GAP GAUGE 1-53
CHEMICAL RESISTNT GLOVE 2-95 to 96, GAUGE 1-4 to 8, 1-50
STORAGE
WHEEL & TIRE
1-61, 1-85, 1-87
1-85
LEATHER
2-102 to 103
2-95, 2-102 to 103
H GLOW PLUG
GRINDING
1-2, 1-17
1-75
FUSE MAINTENANCE AIDS 2-96 HAMMER GROUP 1-7
ELECTRIC 2-129 PERSONAL USE 2-93 to 96, 2-102 to 103 BALL PEEN HAMMER 1-2 to 3, 1-6, HACKSAW 1-3, 1-45, 1-76
REPLACEMENT 2-129 PROTECTION 2-92 to 96, 2-102 to 103 1-8 to 9, 1-46 HAMMER 1-2 to 3, 1-6, 1-8 to 9, 1-46
SAFETY 2-93 to 96, 2-102 to 103 HAND TOOL 1-2 to 3, 1-6, 1-8 to 9, 1-46 HAND OPERATED 1-46
PNEUMATIC 1-71 to 72 HANDLE 1-1 to 2, 1-4 to 5, 1-7, 1-10, 1-15,
G GOVERNOR
ADJUSTABLE 1-15
PNEUMATIC TOOL
SERVICEMANS HAND TOOL
1-71 to 72
1-2 to 3, HEX BIT SET
1-21 to 22, 1-38 to 39, 1-54
1-3, 1-8, 1-15, 1-31, 1-42
GASKET MATERIAL LUBE 3-32 1-6, 1-8 to 9, 1-46 HEX KEY WRENCH 1-6, 1-9, 1-43
ADHESIVE 3-6 METER 1-15 SOFT FACE HAMMER 1-2 to 3, 1-46 HOSE ASSEMBLY 1-8
ADHESIVE & SEALANT 3-7, 3-27 OIL 3-32 TIP 1-3, 1-46 HOSE ASSEMBLY TOOL 1-39
BONDING 3-7 SOCKET 1-15 TOOL SET 1-2 to 3, 1-8, 1-46 HOUSING 2-47
CAULKING 3-7 HYDRAULIC 1-64 to 65
ELECTRONIC 3-7 GREASE HAND TOOL IMPACT 1-66 to 68
FLEXIBLE 3-6 CARTRIDGE 3-21 ACCESSORY 1-64 IMPACT SOCKET 1-5 to 8, 1-13 to 14,
FLEXIBLE GASKET 3-7 CHASSIS GREASE 3-21 ADAPTABLE CABLE 1-22 1-18 to 19, 1-29 to 30,
FORM-IN-PLACE GASKET 3-7, 3-27 GENERAL PUR LITHIUM 3-21 ADAPTER 1-1 to 2, 1-5 to 6, 1-9, 1-12, 1-33 to 34, 1-66 to 68
HEAT SINK COMPOUND 3-7, 3-27 GENERAL PURPOSE GREASE 3-21 1-15, 1-22, 1-48, 1-54, 2-18 IMPACT TOOL 1-6 to 7, 1-19,
HIGH TEMP 3-7 HIGH LOAD GREASE 3-21 ADAPTER FITTING 1-22 1-29, 1-33 to 34
LIQUID GASKET 3-6 LITHIUM BASED GREASE 3-21 ADJUSTMENT 1-9, 1-36 INSTALLATION TOOL 1-44
R.T.V. 3-7, 3-27 LUBE EQUIPMENT 3-21 ALLEN WRENCH 1-3, 1-6, 1-8 to 9, JAW 1-39
SEALANT 3-6 LUBRICANT 3-21 to 22, 3-30 1-42 to 43 KIT 1-20
SILICONE 3-7, 3-27 LUBRICANT SYSTEM 3-21 BALL PEEN HAMMER 1-2 to 3, 1-6, KNIFE 1-54
THERMALLY CONDUCTING RTV 3-7, 3-27 LUBRICATION 3-21 1-8 to 9, 1-46 LIFTING 1-8
MOLY GREASE 3-21 BAR 1-6, 1-9 LOCK 1-83
GAUGE MOLYBDENUM DISULFIDE 3-21 BASE 1-85 MAGNETIC 1-54
CROWFOOT 1-12 MOUNTING 3-30 BEARING 1-48 MAINTENANCE TOOL 1-9
DIFFERENTIAL 1-8 MOUNTING KIT 3-30 BIT 1-8 to 9, 1-15, 1-45 MEASURING 1-3, 1-49 to 50
FEELER GAUGE 1-2 to 7, 1-9, 1-53 MOUNTING TIRE 3-30 BLADE 1-3, 1-45, 1-54, 1-76 MEASURING RULE 1-3, 1-5 to 6,
GAP GAUGE 1-2 to 7, 1-9, 1-53 REBUILDING 3-28 BLOCK 1-50 1-49 to 51
GAUGE GROUP 1-8 SEALANT 3-28 BOLT 1-39 MEASURING TAPE 1-3, 1-49 to 50
GROMMET 1-61 SILICONE 3-28 BOLT EXTRACTOR 2-44 to 45 MEASURING TOOL 1-4 to 8
HAND TOOL 1-4 to 8, 1-50 TIRE 3-30 BOLT REMOVER 2-44 to 45 METRIC 1-8, 1-15, 1-30 to 31, 1-33,
HEAT GUN 2-123 TURBO CHARGER 3-28 BOX 1-83, 2-47 1-36, 1-43
HYDRAULIC 2-49 VACUUM 3-28 BOX WRENCH 1-39, 1-59 METRIC SOCKET 1-3, 1-6 to 8, 1-19, 1-26,
HYDROSTAT 1-8 BRAKE 1-36 1-29 to 31, 1-33 to 36, 1-42
INDICATOR 1-12 GREASE GUN BREAKER BAR 1-1, 1-7, 1-14, NYLON 1-48
MEASURING TOOL 1-4 to 8 BATTERY 1-57 1-20 to 21, 1-54 OFFSET WRENCH 1-36
PLUG 2-49 COUPLER 1-56 BRUSH 1-55 to 56 OPEN END WRENCH 1-12, 1-25, 1-36, 1-41
POWER TRAIN TOOL 1-4 to 8 COUPLING 1-56 BUSHING 1-48 PADDING 1-83
PRESS 2-49 GUN 1-4 to 9, 1-56 CABINET 1-82 to 83 PERSONAL USE 1-49, 2-71
PRESSURE 1-8, 2-123 HOSE ASSEMBLY TOOL 1-56 CASE 1-48 PICK 1-54
PRESSURE GAUGE 1-8 LEVER GUN 1-4 to 9, 1-56 CENTER PUNCH 1-2 to 3, 1-53 PIN 1-40, 1-47 to 48
PROTECTION 1-61 LUBE EQUIPMENT 1-4 to 9, 1-56 CHAIN 1-8 PIN INSERTER 1-48
SERVICEMANS HAND TOOL 1-4 to 8 LUBE GUN 1-4 to 9, 1-56 CHAIN WRENCH 1-39 PIN REMOVER 1-47 to 48
SHRINK WRAP 2-123 LUBRICATION 1-56 to 57 CHISEL 1-2 to 3, 1-48, 1-53 PIN SOCKET 1-20
SPARK PLUG GAP 1-2 to 7, 1-9, 1-53 NIPPLE 1-56 COMBINATION WRENCH 1-1, 1-3, 1-6, PINION 1-43
TESTING 1-8 NOZZLE ASSEMBLY 1-56 1-8 to 9, 1-23 to 24, 1-35, 1-39, 1-41 PIPE CUTTER 1-51
TIRE GAUGE 1-4 to 8 REPAIR PART 1-56 CROWFOOT 1-12 PIPE WRENCH 1-50 to 51
TORQUE 1-61 ZERK ADAPTER 1-56 CUP 1-54 PISTON 1-53
WHEEL & TIRE 1-4 to 8 CUTTING 1-40, 1-51 PLASTIC HANDLE SCREWDRIVER 1-2,
WRENCH 1-12, 1-61 GUARD CUTTING TOOL 1-40 1-45
HEAT GUN 2-123 CUTTING WHEEL 1-40 PLIERS 1-2 to 5, 1-8, 1-51 to 52, 1-58
GAUGE GROUP SHRINK WRAP 2-123 CYLINDER HEAD TOOL 1-2, 1-17 PNEUMATIC TOOL 1-71
ASSEMBLY 1-8 DIFFERENTIAL 1-43 POPPER VALVES 1-53
BOLT 2-128 GUIDE DISPLAY 1-43 POWER TRAIN TOOL 1-4 to 8, 1-22, 1-43
COUPLING 1-8 CRANKSHAFT 2-40 DRAWER LINER 1-83 PRY BAR 1-1, 1-7, 1-14, 1-21
DIFFERENTIAL 1-8 DRILL 2-40 DRESSING TOOL 1-19, 1-34 PULLER 1-2, 1-9, 1-21, 1-34
GAUGE 1-8 GEAR 2-40 DRILL 1-46 PUMP 1-65
HYDROSTAT 1-8, 2-128 HELI-COIL 2-40 DRIVE 1-19, 1-22 to 23 PUNCH 1-2 to 3, 1-52 to 53
MEASURING TOOL 1-8 HYDRAULIC 2-40 DRIVER 1-1 to 6, 1-8 to 10, 1-12, RACE 1-48
PRESSURE 1-8, 2-128 INSERT 2-40 1-14 to 15, 1-17, 1-20 to 22, RATCHET 1-4 to 5, 1-8, 1-14 to 15,
PUMP 2-128 1-31, 1-47 to 48 1-20 to 21, 1-23, 1-34, 1-38, 1-58
Nomenclature Index
Nomenclature Index
MARKER
1-1, 1-7, 1-14, 1-21
Nomenclature Index
Nomenclature Index
Nomenclature Index
QUICK DISCONNECT cont. REPLACEMENT cont. RUST PREVENTIVE cont. SAFETY cont.
Nomenclature Index
STEERING 2-49 TIRE 1-90 RETAINING NUT 1-19, 1-33 STARTING SYSTEM 1-22
SUPPLY 2-49 TRANSMISSION 1-88 RIM 1-19, 1-62 UNIVERSAL 1-22
SUSPENSION 2-49 SERVICE VEHICLE 2-62
TEST GROUP 2-49 SMOKE CANDLE SERVICEMANS HAND TOOL 1-1 to 15, STORAGE
TESTING 2-49 AIR LEAK DETECTION 3-23 1-17 to 23, 1-29, 1-31, ACCESSORY 1-85
TIRE 2-49 BOMB 3-23 1-33 to 34, 1-43 to 44, 1-54 BLOCK 1-61, 1-85
TRANSPARENT 2-49 CANDLE 3-23 SOCKET EXTENSION 1-3 to 4, 1-6, 1-9, BOX 1-85 to 87, 2-122
VEHICLE SYSTEM TOOLS 2-49 LEAK DETECTION 3-23 1-12, 1-21 CABINET 1-80 to 83
SOCKET WRENCH 1-19, 1-33 to 34, 1-43 CAP 2-52 to 55
SEAL KIT SNAP RING SPARK PLUG 1-13, 1-18, 1-44 CASE 1-61, 1-85 to 87
CLEANING 3-9 PLIERS 1-52 SPARK PLUG SOCKET 1-44 COATING 3-31
HARDWARE KIT 2-128 REPLACEMENT 1-52 SUSPENSION 1-19, 1-43 CONNECTOR 1-86
HYDRAULIC 1-63 RETAINING 1-52 TOOL 1-1, 1-5, 1-22, 1-26, 1-32, 1-34,1-54 COVER 1-80
HYDRAULIC WRENCH 1-64 SNAP RING PLIERS 1-52 TOOL SET 1-1 to 15, 1-17 to 23, 1-29, 1-31, DIVIDER 1-85
KEY PAD 2-128 TIP 1-52 1-33 to 34, 1-43 to 44, 1-54 DIVIDER KIT 1-85
SQUARE DRIVE 1-64 UNDERCARRIAGE 1-52 TORQUE 1-13, 1-18 to 19, 1-44, 1-62 EXTENSION NOZZLE 1-74
TORQUE 1-63 TORQUE CONTROL TOOL 1-2, 1-9, 1-17 FLAMMABLE 1-74
WRENCH 1-63 SOCKET TORX 1-3, 1-16 FOAM 1-61, 1-85, 1-87
ADAPTER 1-1 to 2, 1-5 to 6, 1-9, 1-15, TRACK 1-19 FOAM BLOCK 1-85
SERVICE 1-22, 1-54 TRANSMISSION 1-17, 1-43 FOAM PAD 1-85
CREEPER, MECHANICS 2-111 ADJUSTABLE 1-15 U-JOINT 1-23 HAND TOOL 1-2, 1-8, 1-15, 1-82 to 83
SERVICE TOOL 2-111 ASSEMBLY 1-15 to 16, 1-31 UNIVERSAL 1-1 to 2, 1-13, 1-17, 1-28, 1-32 HEAT SHRINK 2-121
BAR 1-43 UNIVERSAL JOINT 1-2, 1-9, 1-17, HOSE 2-52 to 55
SHAFT BATTERY 2-61 to 63 1-22, 1-34 HYDROSTAT 1-85
DISC 2-8, 2-10 to 11 BATTERY STARTING SYS 2-61 to 63 WHEEL & TIRE 1-18 to 19, 1-62 INSERT 1-61, 1-85, 1-87
ENGINE TOOL 2-8, 2-10 to 11 BIT 1-5, 1-31, 1-43 WRENCH 1-3 to 7, 1-9 to 15, 1-17 to 19, LINER 1-85
MANDREL 2-8, 2-10 to 11 BOLT 1-19 1-27, 1-29 to 30, 1-32 to 34, LOCK 1-83
SURFACE RECONDITIONING 2-8, BOOSTER 2-61 to 63 1-43 to 44, 1-62, 1-66 to 68, 1-80 LUBRICANT 3-31
2-10 to 11 BRAKE 1-33 MEASURING TOOL 1-85
THREADED 2-8, 2-10 to 11 BREAKER BAR 1-20 SOLVENT NOZZLE ASSEMBLY 1-74
CABLE 2-61 to 63 AEROSOL 3-25 O-RING KIT 1-86
SHOP COUNTERSHIFT 1-43 AIR CONDITION TOOL 3-29 OIL 3-30 to 31
ACCESSORY 2-110 CYLINDER 1-33 AIR CONDITIONING 3-29 PACKAGING 2-121
AIR 1-73 CYLINDER HEAD TOOL 1-2, 1-13, CLEANING 3-25 to 26 PACKING 1-85
DISPLAY 1-73 1-17 to 18, 1-33, 1-44 DEGREASER 3-26 PADDING 1-61, 1-85, 1-87
FLOOR MAT 2-110 DISASSEMBLY TOOL 1-16 EPOXY 3-40 PAPER 2-122
FUNNEL 2-115 DRESSING TOOL 1-19, 1-34 HIGH FLASH 3-25 PLASTIC 1-85, 2-122
HOSE 1-73 DRIVE 1-16, 1-19, 1-23 LUBRICANT 3-26 PLASTIC CASE 1-85
JAW INSERT 2-56 DRIVER 1-1 to 10, 1-12 to 14, 1-17 to 18, MAINTENANCE AIDS 3-25 PLUG 2-52 to 55
KIT 2-56 1-20 to 22, 1-31 MINERAL SPIRIT 3-25 POWER TRAIN 1-85
OIL DISPENSING 2-115 DUAL WHEEL 1-18, 1-62 OIL 3-26 POWER TRAIN TOOL 1-85
PUMP CAN 2-115 ENGINE TOOL 1-1 to 6, 1-8 to 10, PAINT 3-39 to 40 PROTECTION 2-52 to 55
SWIVEL 2-56 1-12 to 14, 1-17 to 18, PAINT PRODUCTS 3-25, 3-39 to 40 PROTECTIVE 2-121 to 122
VISE 2-56 1-20 to 22, 1-33 PAINT THINNER 3-39 to 40 PROTECTOR 1-87
EXTENSION 1-1 to 2, 1-10, 1-21 PENETRATE OIL 3-26 REPAIR PART 1-61, 1-85
SHRINK TUBING F.T. 1-1, 1-5, 1-22, 1-54 PRIMER 3-39 to 40 REPLACEMENT 1-87
CONNECTOR 2-77 FLYWHEEL 1-1, 1-4, 1-14, 1-18 PRIMER THINNER 3-39 to 40 RUST PREVENTIVE 3-30 to 31
ELECTRICAL 2-76 to 77 FRAME & HITCH TOOL 1-19, 1-43 RETARDER 3-40 SAFETY GOGGLES 2-54
HEAT SHRINK 2-76 FUEL SYSTEM TOOL 1-2, 1-9, 1-17 to 18 SPRAYER 3-26 SAFETY TANK 1-74
INSULATOR 2-77 GLOW PLUG 1-2, 1-17 THINNER 3-39 to 40 SERVICEMANS HAND TOOL 1-2, 1-8,
GOVERNOR 1-15 URETHANE 3-40 1-15, 1-82 to 83
SHRINK WRAP GOVERNOR TOOL 1-2, 1-9, 1-17 WASHER 3-25 SHIPPING 2-121 to 122
FUEL LINE 2-123 HAND TOOL 1-1 to 23, 1-26 to 34, SHRINK WRAP 2-121
GAUGE 2-123 1-43 to 44, 1-54, 1-66 to 68, 1-80 SPACER SOLVENT CUTBACK GREASE 3-31
GUARD 2-123 HANDLE 1-1 to 2, 1-4 to 5, 1-7, 1-9 to 10, CUTTING 1-40 SPRAY GUN 1-74
HEAT GUN 2-123 1-17, 1-22, 1-54 HAND TOOL 1-40 STORE CABINET 1-79, 1-85
HEAT SHRINK 2-121 HEX BIT SET 1-1, 1-3 to 5, 1-7 to 8, SURE SEAL 1-86
HOSE ADAPTER 2-123 1-12, 1-15, 1-18, 1-31 SPANNER WRENCH TOOL BOX 1-2, 1-8, 1-15, 1-80 to 83
PRESSURE 2-123 HITCH 1-33 HAND TOOL 1-8, 1-41 TOOL CHEST 1-2, 1-8, 1-15, 1-82 to 83
PROTECTIVE 2-121 HYDRAULIC 1-16 SERVICEMANS HAND TOOL 1-8, 1-41 TOOL STORAGE 1-83
REGULATOR 2-123 IMPACT 1-11, 1-17, 1-19, 1-27 to 28, SPANNER 1-40 TOP DECK 1-80
SPARK PLUG 2-123 1-32 to 33 TOOL SET 1-8, 1-41 TRANSMISSION 1-85
STORAGE 2-121 IMPACT SOCKET 1-6 to 7, 1-11, WRENCH 1-40 VAPOR CORROSION INHIBITING 3-30
VALVE ASSEMBLY 2-123 1-13 to 14, 1-17 to 19, 1-27 to 30, VIBRATION 1-87
1-32 to 34, 1-66 to 68 SPRAY BOTTLE WAREHOUSE EQUIPMENT 1-2, 1-8,
SLEEVE IMPACT TOOL 1-6 to 7, 1-19, BOTTLE 3-27 1-15, 1-82 to 83
HELI-COIL 2-40 1-29, 1-33 to 34 WATER DISPLACING 3-31
INSERT 2-40 INJECTION PUMP 1-15 STAND WHEEL & TIRE 1-85
LIFTING 1-89 INSTALLATION TOOL 1-44 ADAPTER 1-22 to 23
PROTECTIVE 1-89 KIT 1-10, 1-27 COTTER PIN 2-129 STRAP
SLEEVE ASSEMBLY 2-40 MAINTENANCE TOOL 1-18 CYLINDER 1-22 to 23 ADJUSTMENT 2-122
SLING 1-89 METER 1-15 ENGINE LIFTING & POSITIONING 2-129 COIL 2-122
METRIC 1-31 ENGINE OVERHAUL 2-129 FUEL SYSTEM TOOL 1-40
SLING METRIC SOCKET 1-3, 1-6 to 8, 1-19, ENGINE RE-BUILD 2-129 LUBE SYSTEM TOOL 1-40
ACCESSORY 1-8, 1-89 1-26, 1-29, 1-31, 1-33 to 34 ENGINE REPAIR 2-129 MAINTENANCE TOOL 1-40
ASSEMBLY 1-88 MOUNTED 2-62 ENGINE ROLL-OVER TOOL 2-129 NYLON 2-123
LEVEL ASSEMBLY 1-88 POWER 2-61 to 63 HYDRAULIC 1-22 to 23 TIE 2-111
LIFTING 1-8, 1-88 to 90 POWER TRAIN 1-43 MULTIPLIER 1-22 to 23
LOAD LEVELER 1-88 POWER TRAIN TOOL 1-18 to 19, 1-33, 1-62 REPAIR 1-22 to 23 STUD
PLATE 1-89 PUMP 1-16 TORQUE 1-22 to 23 INSTALLER 2-47
PROTECTIVE 1-89 RATCHET 1-14, 1-20 to 21, 1-23
SHACKLE 1-8, 1-89 REMOVAL 1-10, 1-27 STARTER SUPPORT
SLEEVE 1-89 REPAIR 1-14, 1-20 to 21 ENGINE STARTING 1-22 BRACKET 2-16 to 18
TAG 1-88 REPAIR KIT 1-14, 1-20 to 21 EXTENSION 1-22 BRAKE 2-35
RETAINING 1-1, 1-4, 1-14, 1-18 COLUMN 2-35
Nomenclature Index
GRINDING 2-16 to 18 TEST GROUP 2-129 TEST KIT SERVICEMANS HAND TOOL 1-2,
HOLDER 2-16 to 18 WASHER 2-129 ADDITIVE 3-12 1-8 to 9, 1-15, 1-82 to 83
HOUSING 2-35 ANTI-FREEZE ADDITIVE 3-12 STORAGE 1-2, 1-8, 1-15, 1-80 to 83
STEERING 2-35 TAG ANTI-FREEZE CONCENTRATE 3-12 TOOL CHEST 1-2, 1-8 to 9, 1-15, 1-82 to 83
SURFACE RECONDITIONING 2-16 to 18 LOAD LEVELER 1-88 CHEMICAL 3-13 TOOL SET 1-15, 1-83
TAP 2-35 SLING 1-88 CONDITIONER 3-13 TOOL STORAGE 1-83
VALVE STEM 2-16 to 18 COOLANT 3-12 to 13 TOP DECK 1-80
WHEEL 2-16 to 18 TAP COOLANT CONDITIONER 3-12 to 13 WAREHOUSE EQUIPMENT 1-2, 1-8,
BEVEL GEAR 2-35 COOLING SYSTEM 3-13 1-15, 1-82 to 83
SURFACE RECONDITIONING BOGIE 2-32, 2-35 DISTILLATION 3-12 WATER RESISTANT 1-84
ABRASIVE 2-3 to 6, 2-10 to 14, BRAKE 2-35 KIT 3-13
2-17 to 20, 2-22, 2-24, 2-26 BUTTRESS TAPS 2-35 RADIATOR 3-13 TOOL STORAGE
ACCESSORY 1-73, 2-21 CASE 2-35 TEST STRIP 3-13 ACCESSORY 1-79
ADAPTER 2-16 to 18 COLUMN 2-35 CABINET 1-79
AIR 1-73 COUPLING 2-35 TESTING HAND TOOL 1-4 to 5
BELT 2-24 GUIDE 2-40 ASSEMBLY 1-8 RATCHET 1-4 to 5
BENCH 2-21 HAND OPERATED 2-31 to 32, 2-35, 2-42 BOLT 2-128 to 129 STAINLESS STEEL 1-79
BRACKET 2-16 to 18 HELI-COIL 2-37 to 40 COUPLING 1-8 STORAGE 1-83
BRUSH 2-3 to 5, 2-11, 2-18 HOUSING 2-35 COVER 2-50 STORE CABINET 1-79
CLEANING 2-9, 2-19 IMPLEMENT AND LIFT DIFFERENTIAL 1-8 THREAD REPAIR 2-34
CONE 2-26 ARM TOOL 2-32, 2-35, 2-42 DRIVE 2-129 TOOL BAG 1-83
CONNECTING ROD 2-16 INSERT 2-37 to 40 FITTING 2-49 TOOL BOX 1-83
CRANKSHAFT 2-24 LINKAGE PINS 2-32, 2-35, 2-42 GAUGE 1-8 TOOL HOLDER 2-34
CUT-OFF WHEEL 2-20 MACHINE 2-31 GAUGE GROUP 1-8, 2-128 WRENCH 1-23
CUTTING 2-9, 2-20, 2-22 METAL CUTTING THREAD INSERT 2-35 GROWLER ARMATURE TEST 2-60
CYLINDER 2-4 METRIC 2-35, 2-39, 2-42 HYDRAULIC 2-49 to 50, 2-128 to 129 TORCH
CYLINDER HONE 2-25 ORIFICE 2-35 HYDROSTAT 1-8, 2-128 CLAMP KIT 2-67
DEBURRING 2-23, 2-26 to 27 PIPE 2-35 MEASURING TOOL 1-8 CONTINUITY TESTER 2-68
DISC 1-73, 2-6 to 17, 2-22, 2-24 PLUG 2-32, 2-35, 2-42 METER 2-49 ELECTRICAL PRODUCT 1-3, 2-67
DRILL 2-21, 2-25 POWER TRAIN TOOL 2-32 PLUG 2-49 FLASHLIGHT 1-3, 2-67 to 68
DRILL SHARPENING 2-21 RECONDITIONING 2-32 PRESSURE 1-8, 2-128 HOLSTER 2-67
EMERY PAPER 2-26 REWORK 2-35, 2-42 PUMP 2-49, 2-128 LIGHT 1-3, 2-67 to 68
ENGINE TOOL 2-8, 2-10 to 11, 2-13 SPIRALOCK THREADS 2-32, 2-35 REPAIR PART 2-128 PERSONAL USE 1-3, 2-67 to 68
FIBER 2-12 to 13 STANDARD 2-39 SEAL 2-49 SAFETY 1-3, 2-67 to 68
FLAP BRUSH 2-5 STEERING 2-35 STEERING 2-128 TESTER 2-68
FLEX HONE TOOL 2-25 STEERING CLUTCH 2-35 TEE 2-49, 2-128
GRINDING 1-73, 2-13, 2-16 to 22, 2-25 SUPPORT 2-35 TEST GROUP 2-60, 2-128 TORQUE
HAND OPERATED 1-73 TAP SET 2-35 WASHER 2-128 ADAPTER 1-22 to 23, 1-59
HOLDER 2-7 to 11, 2-16 to 18 TAPER 2-35 AIR REGULATED 1-34, 1-61 to 62
HOSE 1-73 THREAD RESTORATION 2-32, 2-35, 2-42 THREADED BAR 1-61
IDLER 2-9 UNDERCARRIAGE 2-32, 2-35 CHAIN WRENCH 1-40 BEARING 1-59
LIFT CYLINDER 2-9 WHEEL & TIRE 2-32 CYLINDER 1-40 BLOCK 1-61
LINK 2-9 WHEEL SALVAGE 2-32 DIE 2-33 BOX WRENCH 1-2 to 3, 1-51, 1-59
MANDREL 2-8 to 11, 2-16 to 17, 2-20, WRENCH 2-32, 2-36 DIFFERENTIAL 1-40 CAMSHAFT 1-59
2-22, 2-24 DISC 2-8, 2-10 to 11 CLICK TYPE 1-58
MAST 2-9 TAPE DRILL 2-38 COUPLER 1-61
METAL 2-9 ALUMINUM 2-118, 2-125 ENGINE TOOL 2-8, 2-10 to 11 CROWFOOT 1-59
P.S.A. 2-14 to 15 BLOCK 3-2 HARDWARE KIT 2-130 CYLINDER 1-22 to 23
PAD 2-7 to 8, 2-10 to 11, 2-13, 2-22 CHEMICAL 3-2 HYDRAULIC 1-40 CYLINDER HEAD TOOL 1-13, 1-18, 1-44
PEDESTAL 2-21 DISPENSER 2-119 INSERT 2-43 DEGREE WHEEL 1-60
PISTON TOOL 2-16 DUCT 2-118 LOCKNUT 1-40 DIAL TYPE 1-23, 1-58 to 59
PLUG 2-26 ELECTRICAL 2-76, 2-118 MANDREL 2-8, 2-10 to 11 DRIVER 1-59
POLISHING 2-5, 2-13, 2-16, ELECTRICAL TAPE 2-118 METRIC 2-43 DUAL WHEEL 1-8, 1-18, 1-21, 1-62
2-22 to 24, 2-26 to 27 ENGINE REPAIR 3-2 PINION 1-40 ELECTRIC 1-61
POLISHING STAR 2-13, 2-24 FILAMENT 2-117, 2-119 ROD 2-130 ELECTRONIC 1-61
RECONDITIONING 2-9, 2-18 MARKER 2-125 SHAFT 2-8, 2-10 to 11 EXTENSION 1-2 to 3, 1-8, 1-21,
RESURFACE 2-18 MASKING 2-116 SURFACE RECONDITIONING 2-8, 1-51, 1-59, 1-62
SALVAGE 2-48 PACKAGING 2-116 to 117, 2-125 2-10 to 11 GAUGE 1-61
SANDING 2-22 to 24, 2-27 PAINT 2-116 THREAD REPAIR 2-34, 2-38 HAND IMPACT 1-65
SHAFT 2-8, 2-10 to 11 RUBBER MASTIC TAPE 2-119 THREAD RESTORATION 2-34 HAND TOOL 1-59
SUPPORT 2-16 to 18 TAPE DISPENSER 2-76 HOSE 1-61
THREADED 2-8, 2-10 to 11 THREAD LUBRICANT 2-117 TIMING HYDRAULIC 1-22 to 23, 1-63 to 65
UNDERCARRIAGE 2-9 TRANSPARENT 2-117, 2-119 CASE 1-85 IMPACT SOCKET 1-65
VALVE SEAT 2-25 WHEEL 2-125 FUEL SETTING 1-85 IMPACT TOOL 1-65
VALVE STEM 2-16 to 18 FUEL SYSTEM TOOL 1-85 MAIN BEARING 1-59
WHEEL 2-2 to 3, 2-16 to 22, 2-25 TAPE MEASURE GOVERNOR TOOL 1-85 MAIN CAP 1-59
WIRE 2-2 to 3 FLEXOMETER 1-3, 1-49 to 50 TOOL GROUP 1-85 MOTOR GRADER
WIRE BRUSH 2-3 to 4 HAND TOOL 1-3, 1-49 to 50 TORQUE CONTROL TOOL 1-85 SERVICE TOOL 1-58 to 59
MEASURE 1-49 MOUNTING BRACKET 1-61
SWIVEL MEASURING 1-3, 1-49 to 50 TISSUES MULTIPLIER 1-22 to 23, 1-34, 1-60 to 61
JAW INSERT 2-56 MEASURING RULE 1-3, 1-49 to 50 SAFETY GLASSES 2-88 NIPPLE 1-61
REPAIR PART 1-22 MEASURING TAPE 1-3, 1-49 to 50 WIPES 2-88 POWER TRAIN TOOL 1-8, 1-18 to 19,
SHOP 2-56 PERSONAL USE 1-49 1-21, 1-34, 1-59, 1-61 to 62
UNIVERSAL JOINT 1-22 SERVICEMANS HAND TOOL 1-3, TOOL BOX PUMP 1-65
VISE 2-56 1-49 to 50 BOX 1-83 REGULATOR 1-61
CABINET 1-80 to 83 REPAIR 1-22 to 23
TEE REPAIR KIT 1-58, 1-63
T FITTING
HYDRAULIC
2-49
2-49
CONTAINER
COVER
1-84
1-80 RIM
SEAL KIT
1-19, 1-62
1-63
DRAWER LINER 1-83
TACHOMETER PLUG 2-49 FOAM PAD 1-83 SERVICE KIT 1-58
BOLT 2-128 PUMP 2-49 HAND TOOL 1-2, 1-6, 1-8 to 9, SERVICEMANS HAND TOOL 1-65
DIAGNOSTIC 2-128 STEERING 2-128 1-15, 1-82 to 83 SOCKET 1-13, 1-18 to 19, 1-44, 1-62
MARINE ENGINE 2-129 TEST GROUP 2-128 LOCK 1-82 to 83 SPARK PLUG 1-13, 1-18, 1-44
STEERING 2-129 TESTING 2-49, 2-128 PADDING 1-83 STAND 1-22 to 23
WASHER 2-128 REPAIR PART 1-83
Nomenclature Index
Nomenclature Index
Supplies and
Hand Tools
CAT, CATERPILLAR their respective logos and Caterpillar Yellow, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.