Professional Documents
Culture Documents
Blanking Plugs: Drilling & Down-Hole Completion Tools
Blanking Plugs: Drilling & Down-Hole Completion Tools
BLANKING PLUGS
MODEL: WC-BPL-X [Go] & WC-BPL-XN [No-Go]
PRODUCT No.: WC-41403 & WC-41409
These are wireline operated combination tool of Lock mandrel,
Equalizing prong and Equalizing sub, set in respective landing nipple of
corresponding size and type, in the flow path to plug the tubing, used as
flow control devices. Plugs are utilized for holding pressure differentials
from above or below when set at relevant profile of Landing Nipples.
Features/Benefits:
Maximum versatility reducing completion and production
maintenance costs.
Allows for repositioning of flow controls as well conditions change.
Keys of locking mandrel retracted into assembly while running and
retrieving.
Running tool allows selection of nipple to land and set the lock.
Maximum flow capacity from large, straight-through bore of locking
mandrel.
Nipples installed in tubing string in any order- reducing workover risk
Provides unlimited number of positions to set.
Same ID in all nipples reducing flowing pressure loss and minimizing
turbulence.
Applications:
Selected zones can be produced or shut in.
To pressure test tubing.
To isolate tubing for wellhead repair or removal
To set hydraulic actuated packers.
To snub tubing in or out of the well.
WCBPLX WCBPLXN
Specification Guide:
Tubing Nipple Accessory Equalizing Lock For Top For Bottom
Running Tool B Probe Mandrel Mandrel No-Go No-Go
Tubing Nipple Size Plug Pulling Tool Type
WC-C1 Size Fishing Fishing Maximum Maximum
Size /Seal Bore Size
Size Neck OD Neck ID Plug OD Plug OD
inch inch inch inch inch OTIS CAMCO inch inch inch inch
1.562 1.56 1.615 1.552
2 1/16 2 1/16 2 1/16 40SB6 JDC15154 1.188 0.750
1.625 1.62 - 1.615
1.781 1.78 1.865 1.771
40RB17 JUC15185
1.812 1.81 1.865 1.802
2 3/8 2 3/8 2 3/8 1.375 0.875
1.875 1.87 40SB1 JDC15169 - 1.865
2.062 2.06 40RB18 JUC15189 2.115 2.052
2.250 2.25 2.302 2.240
2 7/8 2 7/8 2 7/8 40SB2 JDC15171 1.750 1.188
2.312 2.31 - 2.302
2.562 2.56 2.625 2.550
40RB19 JUC15191
3 1/2 2.750 2.75 3 1/2 3 1/2 2.313 1.438 2.802 2.740
2.812 2.81 40SB9 JDC15181 - 2.802
3.688 3.68 3.740 3.678
40RB20 JUC15193
4 1/2 3.750 3.75 4 1/2 4 1/2 3.125 2.062 3.802 3.740
3.812 3.81 40SB10 JDC15183 - 3.802
WCLMX WCLMR
Specification Guide:
To Run To Pull
Tubing Nipple Seal ECV-F ECV-FN
Check Valve WC-C1 Jar Down
Size Bore Size Pulling Tool type Max. OD Max. OD
WCECVF WCECVFN Size Running Tool Pulling Tool
in in Size Inches OTIS CAMCO OTIS CAMCO in in
1.562 1.56 1.615 1.552
2 1/16 2.1/16 40SB6 JDC15154 40SB6 JDC15154
1.625 1.62 1.672 1.615
1.781 1.78 1.865 1.771
40RB17 JUC15185
2 3/8 1.812 1.81 2.3/8 40SB1 JDC15169 1.865 1.802
40SB1 JDC15169
1.875 1.87 1.905 1.865
2.250 2.25 40RB18 JUC15189 2.302 2.240
2 7/8 2.7/8 40SB2 JDC15171
2.312 2.31 40SB2 JDC15179 2.364 2.302
2.750 2.75 40RB19 JUC15191 2.802 2.740
3 1/2 3.1/2 40SB9 JDC15181
2.812 2.81 40SB9 JDC15181 2.865 2.802
3.688 3.68 3.740 3.678
40RB20 JUC15193
4 1/2 3.750 3.75 4.1/2 40SB10 JDC15183 3.802 3.740
40SB10 JDC15183
3.812 3.81 3.875 3.802
R PULLING TOOL
MODEL: WC-PTR
PRODUCT No.: WC-41418
The WC-R Pulling Tool is a wireline service tool designed to remove
retrievable subsurface devices with external fishing necks from a well.
This tool utilizes a set of three dogs to engage the fishing neck.
The WC-R Pulling Tool is available in a wide range of sizes, with three
reaches in each sizes. All tools can be supplied for standard or H2S
service.
Specification Guide:
Tubing Nipple Accessory Running Locating Top Thread Fish Shear Pin
Size Seal Bore
Size Size Tool Size Ring Size Connection Neck Size Diameter
in in in OD Size OD OD
in in ins in
N1 SHANK
MODEL: WC-N1
PRODUCT No.: WC-23905
N1 shank is used in conjunction with the C1 running tool to run and
land flow control equipments such as lock mandrels, blanking plugs, etc
into landing nipples.
Specification Guide:
A PROBE
MODEL: WC-A-P
PRODUCT No.: WC-23902
These probes are widely used in running, equalizing and pulling
operations of various flow control devices.
Specification Guide:
Accessory Probe Size Top
Size Major OD Connection
in in in
1.43 1.62 7/16 7/16 14
1.78 -2.06 1/2 1/2 - 14
2.25 2.56 1/2 1/2 -14
B PROBE
MODEL: WC-B-P
PRODUCT No.: WC-23901
These are used with a standard pulling tools to retrieve lock mandrels.
Specification Guide:
Top Bottom
Lock Size Probe Size Length
Connection Connection
in in in in in
1.43 1.62 2 1/16 6.28 1/2 13 7/16 14
1.78 -2.06 2 3/8 7.09 1/2 13 1/2 - 14
2.25 2.56 2 7/8 7.22 1/2 13 1/2 -14
2.75 2.81 3 1/2 7.75 5/8 -11 5/8 11
3.68 3.81 4 1/2 8.50 1 1/4 -12 5/8 - 11
Specification Guide:
SEPARATION SLEEVE
MODEL: WC-SSVS
PRODUCT No.: WC-41420
WELLCARE Separation Sleeve, when attached to an appropriate lock is
a wire-line retrievable tool, used to isolate the control line port of Safety
Valve Landing Nipples.
Features/Benefits:
Self equalizing type
Working pressure up to 10,000 psi
Sealing and sealing surfaces are out of flow path, when valve is in
the open position
Solid construction of flapper made from bar stock.
Specification Guide
Landing Nipple Working
Tubing Size Valve ID
Seal Bore Pressure
in. mm in. mm In. Mm Psi
1.710 43.43 0.62 15.75
2 3/8 60.33
1.875 47.63 0.75 19.05
2.125 53.98 0.81 20.57
2 7/8 73.03 2.188 55.58 0.81 20.57
2.313 58.75 1.12 28.45
2.562 65.07 1.00 25.40
3 88.90 2.750 69.85 1.50 38.10
5,000
2.813 71.45 1.50 38.10
6,000
4 101.60 3.313 84.15 1.75 44.45
7,500
3.437 87.30 1.75 44.45
10,000
4 114.30 3.688 93.68 1.87 47.50
3.813 96.85 2.12 53.85
5 127.0 4.125 104.78 2.38 57.15
5 139.70 4.562 115.87 2.56 65.02
5.750 146.05 3.38 85.85
7 177.80 5.875 149.23 3.50 88.90
5.963 151.46 3.50 88.90
Features / Benefits:
Automatic Locating Collet- Flags the operator when a sleeve is
reached. It also indicates when the tool passes through a sleeve or
nipple.
Proof of Completed Shift- As soon as a shift-either Open or Close is
completed, an attempt to repeat the operation will give a positive
indication that the shift was performed.
Safety Feature- If the sleeve is opened in the presence of a
differential pressure in favor of the annulus, the release mechanism
is held inoperative by the flow until the pressure is balanced to allow
safe removal.
Open and Close Sleeves in one Trip- Run shifting tools in tandem if
required to both open and close sleeves on the same run in well.
Run tool with collect up to open sleeves or with collect down
(Inverted position) to close sleeves.
Deliberate Release- Even after the shifting tool is seated in the
sleeve; it can be released without shifting the closing sleeve.
Specification Guide:
Shifting
WC-L Sliding Fishing
Tool Collet Top Thread
Sleeve Size Neck Size
Size Connection
in in
in
1.43 1.468 15/16 - 10 1.188
1.50 1.531 15/16 10 1.188
1.56 1.593 15/16 10 1.188
1.62 1.656 15/16 - 10 1.188
1.78 1.807 15/16 10 1.375
1.81 1.843 15/16 10 1.375
1.87 1.906 15/16 10 1.375
2.25 2.281 1 1/16 - 10 1.750
2.31 2.343 1 1/16 10 1.750
2.75 2.781 1 1/16 10 2.312
2.81 2.843 1 1/16 - 10 2.312
3.68 3.743 1 1/16 10 2.312
3.81 3.867 1 1/16 - 10 2.312
MODEL: WC-BO
PRODUCT No.: WC-23702
The BO Shifting Tool is used to move the inner sleeve to its open or
closed position in sliding sleeves circulating devices.
The shifting tool engages the recess in the upper (or lower) end of the
inner sleeve to permit the sleeve to be shifted by a jarring action. The
tool is designed to release itself only after the sleeve reaches its fully
open or closed position. This automatic-releasing feature incorporates a
releasing profile on the key itself that acts to compress the key spring
and release the positioning tool. A shear pin is an added feature
designed to release the tool in the event well conditions make it
impossible to shift the sleeve.
Specification Guide:
SLIDING
END
SIDE FISH KEYS OD KEYS OD
CONNECTION
DOOR NECK EXPENDED RETRACTED LENGTH
THREADS
ID in in in
in