Professional Documents
Culture Documents
SCHEDULE OF RATES
FOR THE YEAR - 2012-2013
NASHIK REGION
( Effective from 24-12-2012 )
1 2 3 4 5 6
1 1. (1)
2. (2)
3. -- " -- (3)
4. -- " -- (4)
5. -- " -- (5)
6. -- " -- - (1)
7. -- " -- - (2)
2. 8. -- " -- (6)
9. -- " -- (7)
10. -- " -- (8)
11. -- " -- (9)
12. -- " -- (10)
13. -- " -- (11)
14. -- " -- (12)
15. -- " -- (13)
16. -- " -- (14)
1 2 3 4 5 6
17. -- " -- (15)
18. -- " -- (3)
92. (72) - -
1 2 3 4 5 6
93. -- " -- - (21)
1) 1) 2) 3) 4) 5) 6) 7) 8)
1) 9) 10) 11) 12) 13) 14)
15) 16) 17) 18) 19) 20) 21)
22) 23) 24) 25) 26) 27) 28) 29)
30) 31) 32) 33) 34) 35) 36) 37)
2) 1) 2) 3) 4) 5) 6)
7) 8) 9) 10) 11) 12) 13)
14) 15) 16) 17) 18) 19)
20) 21) 29) 30) 31) 32)
33) 35) 36) 37) 38) 39)
40)
1) 2) 3) 4) 5) 6) 7) 8)
3) 9) 10) 11) 12) 13) 14) 15)
16) 17) 18) 19) 20) 21) 22)
23) 24) 25) 26) 27) 28) 29)
1) 2) 3) 4) 5) 6) 7) 8)
4) 9) 10) 11) 12) 13) 14) 15) 16)
17) 18) 19) 20) 21) 22) 23)
24) 25) 26) 27) 28) 29) 30)
31) 32) 33) 34) 35) 36) 37) 38)
39) 40) 41) 42) 43)
Page 1
1) 2) 3) 4) 5) 6) 7) 8)
5) 9) 10) 11) 12) 13) 14) 15)
16) 17) 18) 19) 20) 21)
22) 23) 24) 25) 26) 27) 28)
1) 2) 3) 4) 5) 6) 7) 8)
6) 9) 10) 11) 12) 13) 14) 15)
16) 8) 19) 20) 21) 22) 23)
24) 25) 26) 27) 28) 29)
30) 31) 32) 33) 34) 35)
36) 37) 38) 39) 40)
41) 42) 43) 44) 45) 46) 47)
48) 49) 50) 51) 52) 53) 54)
55) 56) 66) 67) 68) 69) 70)
71) 72) 73) 74) 75) 76)
77) 78) 79) 80) 81) 82)
1) 2) 3) 4) 5) 6) 7) 8)
7) 9) 10) 11) 12) 13) 14)
15) 16) 17) 18) 19) 20)
21) .
1) 2) 3) 4) 5) 6) 7)
8) 8) 9) 10) 11) 12) 13) 14)
15) 16) 17) 18) 19) 20)
21) 22) 23) 24)
1) 2) 3) 4) 5) 6) 7)
9) 8) 9) 10) 11) 12) 13) 14)
15) 16) 17) 18) 19) 20)
21) 22) 23) 24) 25) 26) 27)
1) 2) 3) 4) 5) 6) 7)
10) 8) 9) 10) 11) 12) 13) 14)
15) 16) 17)
Page 2
1) 2) 3) 4) 5) 6) 7) 8)
11) 9) 10) 11) 12) 13) 14)
15) 16) 17) 18)
1) 2) 3) 4) 5) 6) 7)
12) 8) 9)
1) 2) 3) 4) 5) 6) 7)
13) 8) 9) 10) 11) 12) 13) 14)
1) 2) 3) 4) 5) 6) 7) 8)
14) 9) 10) 11) 12)
1) 2) 3) 4) 5) 6) 7)
15) 8) 9) 10) 11) 12) 13) 14) 15)
16) 17) 16) 17) 18) 19) 20)
21) 22)
1) 2) 3) 4) 5) 6) 7)
16) 8) 9) 10) 11) 12) 13)
14) 15) 16) 17) 18) 19) 20)
21) 22) 23) 24) 25) 26) 27)
28) 29)
1) 2) 3) 4) 5) 6) 7) 8)
17) 9) 10) 11) 12) 13) 14)
15) 16) 17) 18) 19) 20)
21) 22) 23) 24) 25) 26)
27) 28) 29) 30)
1) 2) 3) 4) 5) 6) 7) 8) 9)
18) 10) 11) 12) 13) 14) 15) 16)
17) 18) 19) 20) 21) 22) 23)
24) 25) 26) 27) 28) 29) 30)
31) 32) 33) 34) 35) 36) 37) 38)
39) 40) 41) 42) 43) 44)
45) . 46) 47) 48)
Page 3
1) 2) 3) 4) 5) 6) 7) . 8)
19) 9) 10) 11) 12) 13) 14) 15)
16) 17) 18) 19) 20) 21)
22) 23) 24) 25) 26) 27) 28)
29)
1) 2) 3) 4) 5) 6) 7) 8) 9)
20) 10) 11) 12) 13) 14) 15)
16) 17) 18) 19) 20) 21)
22) 23) 24) 25) 26) 27) 28)
29) 30) 31) 32) 33) 34) 35)
36) 37) 38) 39) 40) 41) 42)
43) 44) 45) . 46) 47) 48)
49) 50) 51) 52) 53) 54)
55) 56) 57) 58) 59) 60) 61)
62) 63) 64) 65) 66)
1) 2) 3) 4) 5) 6) 7) 8)
21) 9) 10) 11) 12) 13) 14) 15)
16) 17) 18) 19) 20) 21)
22) 23) 24) 25) 26) 27)
28) . 29) 30) 31) 32) 33) 34)
35) 36) 37) 38) 39) . 40)
41) 42) 43) 44) 45) 46) 47)
48) 49) 50) 51) 52) 53) 54)
55) 56)
1) 2) 3) . 4) 5) 6) 7) 8)
22) 9) 10) . 11) 12) 13) 14)
15) 16) 17) 18) 19) 20)
21) 22) 23) 24) 25) 26)
27) 28) 29) 30) 31) 32)
Page 4
1) 2) 3) 4) 5) 6) 7)
23) 8) 9) 10) 11) 12) 13) 14)
15) 16) 17) 18) 19) 20) 21)
22) 23) 24) 25) 26) 27) 28)
29) 30) 31) 32) 33) 34) 35)
36) 37) 38) 39) 40)
Page 5
MAHARASHTRA JEEVAN PRADHIKARAN
NASHIK REGION
GENERAL NOTES
1 These rates are applicable to all MJP works in the NASHIK REGION with effect from
dated 24.12.2012
2 Item of excavation is inclusive of normal manual dewatering, however, seperate item for
dewatering shall be proposed in the estimate where underground water is anticipated in
significant magnitude.
3 The rates of excavation for O & M works where limited working space is available and
work is required to be carried out on emergency basis, the rate should be adopted as per
the actual rate analysis which shall be approved by concerned S.E. for that particular
work only.
4 Rates for all items are inclusive of all taxess levied by Central Government, State
Government or Local Bodies.Labour rates are inclusive of EPF 12.5 % . These rates are
applicable only for tendered works,these rates should be reduced by 12.50 % of labour part when
works are to be carried out on piecemeal works and other small works without tendering.
5 As per Government Notification No. 25/2012/service tax dated 20 June 2012 point no. 12 E
Service tax exempted for pipeline, conduit or plant for i) Water supply ii) Water treatment or iii)
Sewerage treatment or disposal
6 For all completed items, initial lead of 5 kms. is considered for collection of materials like
sand, bricks, metal, stone etc. Appropriate addition for lead charges excluding loading ,
unloading for these materials shall be done while estimation.
7 These rates are applicable to water supply and sewerage schemes and its allied works
only. Rates for Items required for general construction, buildings, roads, Irrigation Works etc.
shall be adopted from the current schedule of rates of P.W.D. or Irrigation Deptt. in
respective areas. For bore wells, CSR. of GSDA shall be followed. Increase in percentage
over normal schedule of rates will also be as per norms of respective C.S.R.
8 For mechanical and electrical items related to water supply and sewerage schemes, CSR
for 2012-2013 prepared by Superintending Engineer (Mechanical ), Maharashtra Jeevan
Pradhikaran shall be adopted.
9 Following increase in % over normal schedule of rates of M.J.P. for 2012-2013 will be
applicable. (Ref. PWD GR. No. DSR/1091/CR-6577/Planning-3,dated 08/07/2003)
Area % Increase
a Works in Corporation area 5%
b Works in Municipal areas 2%
c Works in tribal area / hilly and inaccesible areas 10%
d Suger cane area 5%
e Prison / Jail area 15%
f Defence area 20%
g Excavation for pipeline work along National Highway 10%
h Excavation for Dist.system pipe lines,Sewerage system in 10%
towns
10 In case more than one percentage increase on basic rates becomes admissible, instead
of adding both, the higher percentage only be taken. (e.g. if any Municipal Council falls in
hilly area, then additional percentage in rates will be only 10 % and not with 2 % + 10 %).
This additional percentage is only on completed item of work and not applicable to items
of providing of materials like steel, pipes, valves, specials etc
11 For hilly and inaccessible areas / Tribal areas approved by Government, Planning
Department's Circular Nos.(1)1089/CR-66/Plan-19,DT.23/11/1990 and (2) 1094/P-36/K-1455
dt.02/09/1994, shall be followed (refer pages 347 onwords). In addition to amendment
notification by the planning deptt. time to time.
12 For Action Plan Notified Area, Government's Circular in force from time to time shall be
followed.
13 Whenever basic rates of completed items are increased by percentage given at Sr. No. 9,
the issue rates of materials to be supplied by the Department ( if any) shall be increased
by same percentage.
14 This schedule of rates is based on following basic rates for important materials.
15 Details of standard cement consumption and standard weight of various pipes are
incorporated in this CSR .
16 Rates for supply of various types of pipes, specials and valves are inclusive of excise
duty, central sales tax and VAT, third party inspection charges, storage charges, overhead
charges and transportation of materials upto divisional stores and stacking.
17 Cost of carting of pipes and valves from departmental stores to site of work is not
considered in rate analysis, hence this item must be incorporated in each scheme. While
inviting tenders if supply is from departmental store, then this item shall appear in the
tender, and if the supply is by contractor then this item shall not appear in the tender,
even though same is provided in sanctioned scheme, because the contractor is supposed
to bring the pipes and valves directly at site.
18 Though the contractor is required to do refilling before hydraulic testing to avoid traffic
hurdle, no payment for refilling of the trenches of pipeline shall be payable till satisfactory
hydraulic testing is given. Re-excavation required if any, during testing, shall be done by
the contractor at his own cost.
20 10 % of cost of total sub-work of pipeline work shall be retained, till satisfactory hydraulic
test is given, as per IS code.
21 In case of supply of pipes / valves etc. by contractor, only 85% payment shall be released
after supply and 15% after satisfactory hydraulic testing.
23 Provision for octroi charges for pipes specials and valves is not considered in the CSR 2012-
2013. Provision of 4 % of cost for pipes specials and valves to be used in corporation area
shall be made while framing the estimate for works included in corporation limit. Octroi
charges shall be reimbursed to contractor on production of receipt for payment for
materials actully to be used in corporation area, if there specific provision to that effect in
the contract.
24 For use of ready mix cement concrete, prior permission of the Chief Engineer must be
obtained.
25 For Dams , Balancing Tanks , Aerated Lagoons and similar structures, the rates for Film
membranes as per prevailing rates for Irrigation Department will be followed.
26 Capacity of ESR / GSR to be constructed shall be rounded to nearest 1000 litres always
on higher side i.e. if required capacity is 1,23,570 litre, it shall be rounded to 1,24,000
litre. Similarly, if required capacity is 8,26,070 litre, it shall be rounded to 8,27,000 litre.
28 Provision for insurance at 1% is considered in Rate analysis of CSR 2012-2013. These rates are
applicable only for tendered works,these rates should be reduced by 1 % of total rate when works
are to be carried out on piecemeal works and other small works without tendering.
30 The makes of Sluice / Butterfly valves etc. to be used for inlet / outlets of ESRs / GSRs / MBRs /
Pumping main / Rising main and WTP should be from approved makes of M.J.P .
31 Mechanical CSR rates for respective items shall be followed while estimation and the list of
approved makes shall be given in the item.
32 As per Govt.Circular, Materials used for drinking water supply scheme upto first storage point and
pipes of more than 100 mm Dia are exampted from excise duty. However, necessary certificate
from project authority I.e. Distrct Collector / Dy. Commissioner shall be obtained.Also examption
from excise duty is applicable for following conditions.
1) All items of machienery, including instruments, apparatus & applicances, auxillary equipments
& their components/parts required for setting of water treatment plant;
2) Pipes needed for delivery of water from its source to the plant (including the clear treated water
reservoir, if any, thereof) and from there to the first storage point;
3) Pipes of outer diameter exceeding 100 mm, when such pipes are integral part of the wtaer
supply project;
However, necessary certificate from Project Authority i.e. District Collector /Dy.Commissioner
shall be obtained.
33 The royalty charges are considered in the rate analysis of CSR 2012-13 As per Government
Resolution No. Rev and forest Dept Gaukhani 10/1009/ Pra.Kra.309/Kha. Mantralaya
dt.11.2.2010.
34 As per Govt.Circular No.DSR-1090/CR-6453/PLN-3, Dated 14.7.1993 1% for labour amenities is
not considered in the DSR except concrete item while arriving the rates.
35 As per Govt. in Industries & Power G.R. No.BCA-2009/CR-108/Labour 7-A, Dated 17.6.10, 1%
cess on labour welfare is not considered in the DSR while arriving the rates.
SECTION - A : MATERIALS
MACHINERY
Sr. Item of work Unit Collecting the Lifting the Loading Unloading
No. railway receipt material the material the material
etc & unloading from into truck from truck
the consignment railway from including
from railway platform, department stacking in
wagon & keeping loading al store or department
on railway Unloading site of al stores or
platform into truck. work. site of
consignment work.
booked in.
1 2 3 4 5 6 7
1 C.I./D.I./B.W.S.C./ M.S./ R.C.C. pipes of all M.T. 201.00 254.00 181.00 181.00
classes having individual weight more than
300 kg. & alsoother heavy materials, valves,
machinery having individual weight more than
300 kg.
1)The above rates in col. 1 to 5 are applicable only for Railway clearence purpose and not for other carting.
2) The rates given in col. 6 to 7 shall be adopted for estimate purpose only, however actual quotations / D- tender will
prevail.
3) Irrespective of supply of C.I./D.I. Pipes as per rate contract when pipes are directly supplied by the firms by road
railway freight upto destination station and carting as per schedule from Railway Station to work site is allowed In such
cases rate of Mathadi Kamgar shall not be applicable for carting and normal loading, unloading carting shall be
allowed.
STATEMENT II
Including loading, unloading and stacking
Lead Av. No. of Km. Litres of cost of Lit. of cost of cost of 6 Hire Total cost Add 10% Total cost per
in km Speed Trips(N)= Done diesel diesel @ Mobile M.Oil @ mazdoor charges (6+8+ overhead 11+12 trip
8/ ((2L/S) (2NL+6) cons 52.35 / lit oil con- 225/lit of truck 9+10) charges (13/3)
+1) umed sumed /day Rs. Per
day
1 2 3 4 5 6 7 8 9 10 11 12 13 14
0.5 15 7.5 13.5 4.5 235.58 0.096 21.6 1923.75 2650 4830.93 483.09 5314.02 708.54
1 16 7.11 20.22 6.74 352.84 0.144 32.4 1923.75 2650 4958.99 495.9 5454.89 767.21
1.5 16.5 6.77 26.31 8.77 459.11 0.188 42.3 1923.75 2650 5075.16 507.52 5582.68 824.62
2 17 6.48 31.92 10.64 557 0.228 51.3 1923.75 2650 5182.05 518.21 5700.26 879.67
2.5 17.25 6.2 37 12.33 645.48 0.264 59.4 1923.75 2650 5278.63 527.86 5806.49 936.53
3 17.5 5.96 41.76 13.92 728.71 0.298 67.05 1923.75 2650 5369.51 536.95 5906.46 991.02
3.5 17.75 5.74 46.18 15.39 805.67 0.33 74.25 1923.75 2650 5453.67 545.37 5999.04 1045.13
4 18 5.54 50.32 16.77 877.91 0.359 80.78 1923.75 2650 5532.44 553.24 6085.68 1098.5
4.5 18.25 5.36 54.24 18.08 946.49 0.387 87.08 1923.75 2650 5607.32 560.73 6168.05 1150.76
5 18.5 5.19 57.9 19.3 1010.36 0.414 93.15 1923.75 2650 5677.26 567.73 6244.99 1203.27
6 18.75 4.88 64.56 21.52 1126.57 0.461 103.73 1923.75 2650 5804.05 580.41 6384.46 1308.29
7 19 4.61 70.54 23.51 1230.75 0.504 113.4 1923.75 2650 5917.9 591.79 6509.69 1412.08
8 19.183 4.36 75.76 25.25 1321.84 0.541 121.73 1923.75 2650 6017.32 601.73 6619.05 1518.13
9 19.6 4.17 81.06 27.02 1414.5 0.579 130.28 1923.75 2650 6118.53 611.85 6730.38 1614
10 20 4 86 28.67 1500.87 0.614 138.15 1923.75 2650 6212.77 621.28 6834.05 1708.51
15 25 3.64 115.2 38.4 2010.24 0.823 185.18 1923.75 2650 6769.17 676.92 7446.09 2045.63
20 25 3.08 129.2 43.07 2254.71 0.923 207.68 1923.75 2650 7036.14 703.61 7739.75 2512.91
25 25 2.67 139.5 46.5 2434.28 0.996 224.1 1923.75 2400 6982.13 698.21 7680.34 2876.53
30 25 2.35 147 49 2565.15 1.05 236.25 1923.75 2400 7125.15 712.52 7837.67 3335.18
35 30 2.4 174 58 3036.3 1.243 279.68 1923.75 2400 7639.73 763.97 8403.7 3501.54
40 30 2.18 180.4 60.13 3147.81 1.289 290.03 1923.75 2400 7761.59 776.16 8537.75 3916.4
45 30 2 186 62 3245.7 1.329 299.03 1923.75 2400 7868.48 786.85 8655.33 4327.67
50 30 1.85 191 63.67 3333.12 1.364 306.9 1923.75 2400 7963.77 796.38 8760.15 4735.22
60 30 1.6 198 66 3455.1 1.414 318.15 1923.75 2150 7847 784.7 8631.7 5394.81
70 30 1.41 203.4 67.8 3549.33 1.453 326.93 1923.75 2150 7950.01 795 8745.01 6202.13
80 30 1.26 207.6 69.2 3622.62 1.483 333.68 1923.75 2150 8030.05 803.01 8833.06 7010.37
90 30 1.14 211.2 70.4 3685.44 1.509 339.53 1923.75 2150 8098.72 809.87 8908.59 7814.55
100 40 1.33 272 90.67 4746.57 1.943 437.18 1923.75 2150 9257.5 925.75 10183.25 7656.58
Lead Av. No. of Km. Litres of cost of Lit. of cost of cost of 6 Hire Total cost Add 10% Total cost per
in km Speed Trips(N)= Done diesel diesel @ Mobile M.Oil @ mazdoor charges (6+8+ overhead 11+12 trip
8/ ((2L/S) (2NL+6) cons 52.35.0 / lit oil con- 225/lit of truck 9+10) charges (13/3)
+1) umed sumed /day Rs. Per
day
125 40 1.1 281 93.67 4903.62 2.007 451.58 1923.75 2150 9428.95 942.9 10371.85 9428.95
150 40 0.94 288 96 5025.6 2.057 462.83 1808.33 2150 9446.76 944.68 10391.44 11054.72
175 40 0.82 293 97.67 5113.02 2.093 470.93 1577.48 2150 9311.43 931.14 10242.57 12490.94
200 40 0.73 298 99.33 5199.93 2.129 479.03 1404.34 2150 9233.3 923.33 10156.63 13913.19
250 40 0.59 301 100.33 5252.28 2.15 483.75 1135.01 2150 9021.04 902.1 9923.14 16818.88
300 45 0.56 342 114 5967.9 2.443 549.68 1077.3 2150 9744.88 974.49 10719.37 19141.73
400 45 0.43 350 116.67 6107.67 2.5 562.5 827.21 2150 9647.38 964.74 10612.12 24679.35
500 45 0.34 346 115.33 6037.53 2.471 555.98 654.08 2150 9397.59 939.76 10337.35 30403.97
600 45 0.29 354 118 6177.3 2.529 569.03 557.89 2150 9454.22 945.42 10399.64 35860.83
700 45 0.25 356 118.67 6212.37 2.543 572.18 480.94 2150 9415.49 941.55 10357.04 41428.16
800 45 0.22 358 119.33 6246.93 2.557 575.33 423.23 2150 9395.49 939.55 10335.04 46977.45
900 45 0.2 366 122 6386.7 2.614 588.15 384.75 2150 9509.6 950.96 10460.56 52302.8
1000 45 0.18 366 122 6386.7 2.614 588.15 346.28 2150 9471.13 947.11 10418.24 57879.11
1 2 3 4 5 6 7 8 9 10 11 12 13 14
0.5 15 7.5 13.5 4.5 235.58 0.096 21.6 0 2650 2907.18 290.72 3197.9 426.39
1 16 7.11 20.22 6.74 352.84 0.144 32.4 0 2650 3035.24 303.52 3338.76 469.59
1.5 16.5 6.77 26.31 8.77 459.11 0.188 42.3 0 2650 3151.41 315.14 3466.55 512.05
2 17 6.48 31.92 10.64 557 0.228 51.3 0 2650 3258.3 325.83 3584.13 553.11
2.5 17.25 6.2 37 12.33 645.48 0.264 59.4 0 2650 3354.88 335.49 3690.37 595.22
3 17.5 5.96 41.76 13.92 728.71 0.298 67.05 0 2650 3445.76 344.58 3790.34 635.96
3.5 17.75 5.74 46.18 15.39 805.67 0.33 74.25 0 2650 3529.92 352.99 3882.91 676.47
4 18 5.54 50.32 16.77 877.91 0.359 80.78 0 2650 3608.69 360.87 3969.56 716.53
4.5 18.25 5.36 54.24 18.08 946.49 0.387 87.08 0 2650 3683.57 368.36 4051.93 755.96
5 18.5 5.19 57.9 19.3 1010.36 0.414 93.15 0 2650 3753.51 375.35 4128.86 795.54
6 18.75 4.88 64.56 21.52 1126.57 0.461 103.73 0 2650 3880.3 388.03 4268.33 874.66
7 19 4.61 70.54 23.51 1230.75 0.504 113.4 0 2650 3994.15 399.42 4393.57 953.05
8 19.183 4.36 75.76 25.25 1321.84 0.541 121.73 0 2650 4093.57 409.36 4502.93 1032.78
9 19.6 4.17 81.06 27.02 1414.5 0.579 130.28 0 2650 4194.78 419.48 4614.26 1106.54
10 20 4 86 28.67 1500.87 0.614 138.15 0 2650 4289.02 428.9 4717.92 1179.48
15 25 3.64 115.2 38.4 2010.24 0.823 185.18 0 2650 4845.42 484.54 5329.96 1464.27
20 25 3.08 129.2 43.07 2254.71 0.923 207.68 0 2650 5112.39 511.24 5623.63 1825.85
25 25 2.67 139.5 46.5 2434.28 0.996 224.1 0 2400 5058.38 505.84 5564.22 2083.98
30 25 2.35 147 49 2565.15 1.05 236.25 0 2400 5201.4 520.14 5721.54 2434.7
35 30 2.4 174 58 3036.3 1.243 279.68 0 2400 5715.98 571.6 6287.58 2619.83
40 30 2.18 180.4 60.13 3147.81 1.289 290.03 0 2400 5837.84 583.78 6421.62 2945.7
45 30 2 186 62 3245.7 1.329 299.03 0 2400 5944.73 594.47 6539.2 3269.6
50 30 1.85 191 63.67 3333.12 1.364 306.9 0 2400 6040.02 604 6644.02 3591.36
60 30 1.6 198 66 3455.1 1.414 318.15 0 2150 5923.25 592.33 6515.58 4072.24
70 30 1.41 203.4 67.8 3549.33 1.453 326.93 0 2150 6026.26 602.63 6628.89 4701.34
80 30 1.26 207.6 69.2 3622.62 1.483 333.68 0 2150 6106.3 610.63 6716.93 5330.9
90 30 1.14 211.2 70.4 3685.44 1.509 339.53 0 2150 6174.97 617.5 6792.47 5958.31
Lead Av. No. of Km. Litres of cost of Lit. of cost of cost of 6 Hire Total cost Add 10% Total cost per
in km Speed Trips(N)= Done diesel diesel @ Mobile M.Oil @ mazdoor charges (6+8+ overhead 11+12 trip
8/ ((2L/S) (2NL+6) cons 52.35 / lit oil con- 225/lit of truck 9+10) charges (13/3)
+1) umed sumed /day Rs. Per
day
100 40 1.33 272 90.67 4746.57 1.943 437.18 0 2150 7333.75 733.38 8067.13 6065.51
125 40 1.1 281 93.67 4903.62 2.007 451.58 0 2150 7505.2 750.52 8255.72 7505.2
150 40 0.94 288 96 5025.6 2.057 462.83 0 2150 7638.43 763.84 8402.27 8938.59
175 40 0.82 293 97.67 5113.02 2.093 470.93 0 2150 7733.95 773.4 8507.35 10374.82
200 40 0.73 298 99.33 5199.93 2.129 479.03 0 2150 7828.96 782.9 8611.86 11797.07
250 40 0.59 301 100.33 5252.28 2.15 483.75 0 2150 7886.03 788.6 8674.63 14702.76
300 45 0.56 342 114 5967.9 2.443 549.68 0 2150 8667.58 866.76 9534.34 17025.61
400 45 0.43 350 116.67 6107.67 2.5 562.5 0 2150 8820.17 882.02 9702.19 22563.23
500 45 0.34 346 115.33 6037.53 2.471 555.98 0 2150 8743.51 874.35 9617.86 28287.82
600 45 0.29 354 118 6177.3 2.529 569.03 0 2150 8896.33 889.63 9785.96 33744.69
700 45 0.25 356 118.67 6212.37 2.543 572.18 0 2150 8934.55 893.46 9828.01 39312.04
800 45 0.22 358 119.33 6246.93 2.557 575.33 0 2150 8972.26 897.23 9869.49 44861.32
900 45 0.2 366 122 6386.7 2.614 588.15 0 2150 9124.85 912.49 10037.34 50186.7
1000 45 0.18 366 122 6386.7 2.614 588.15 0 2150 9124.85 912.49 10037.34 55763
STATEMENT IV
Including loading, unloading and stacking
Lead in km Cost / trip Lime murum Earth Manure or Excavated Sand Aggregate Soling Concrete Timber
building sludge rock stone 40 mm & stone block
rubbish aggregate above (form)
40 mm &
below
1 2 3 4 5 6 7 8 9 10 11
Pay load 6.0 cum 4.8 cum 5.52 cum 3.0 cum 5.75 cum 5.5 cum 4.7 cum 6.0 cum 5.0 cum
0.5 708.54 118.09 147.61 128.36 236.18 123.22 128.83 150.75 118.09 141.71
1 767.21 127.87 159.84 138.99 255.74 133.43 139.49 163.24 127.87 153.44
1.5 824.62 137.44 171.8 149.39 274.87 143.41 149.93 175.45 137.44 164.92
2 879.67 146.61 183.26 159.36 293.22 152.99 159.94 187.16 146.61 175.93
2.5 936.53 156.09 195.11 169.66 312.18 162.87 170.28 199.26 156.09 187.31
3 991.02 165.17 206.46 179.53 330.34 172.35 180.19 210.86 165.17 198.2
3.5 1045.13 174.19 217.74 189.34 348.38 181.76 190.02 222.37 174.19 209.03
4 1098.5 183.08 228.85 199 366.17 191.04 199.73 233.72 183.08 219.7
4.5 1150.76 191.79 239.74 208.47 383.59 200.13 209.23 244.84 191.79 230.15
5 1203.27 200.55 250.68 217.98 401.09 209.26 218.78 256.01 200.55 240.65
6 1308.29 218.05 272.56 237.01 436.1 227.53 237.87 278.36 218.05 261.66
7 1412.08 235.35 294.18 255.81 470.69 245.58 256.74 300.44 235.35 282.42
8 1518.13 253.02 316.28 275.02 506.04 264.02 276.02 323.01 253.02 303.63
9 1614 269 336.25 292.39 538 280.7 293.45 343.4 269 322.8
10 1708.51 284.75 355.94 309.51 569.5 297.13 310.64 363.51 284.75 341.7
15 2045.63 340.94 426.17 370.59 681.88 355.76 371.93 435.24 340.94 409.13
20 2512.91 418.82 523.52 455.24 837.64 437.03 456.89 534.66 418.82 502.58
25 2876.53 479.42 599.28 521.11 958.84 500.27 523.01 612.03 479.42 575.31
30 3335.18 555.86 694.83 604.2 1111.73 580.03 606.4 709.61 555.86 667.04
35 3501.54 583.59 729.49 634.34 1167.18 608.96 636.64 745.01 583.59 700.31
40 3916.4 652.73 815.92 709.49 1305.47 681.11 712.07 833.28 652.73 783.28
45 4327.67 721.28 901.6 784 1442.56 752.64 786.85 920.78 721.28 865.53
50 4735.22 789.2 986.5 857.83 1578.41 823.52 860.95 1007.49 789.2 947.04
60 5394.81 899.14 1123.92 977.32 1798.27 938.23 980.87 1147.83 899.14 1078.96
70 6202.13 1033.69 1292.11 1123.57 2067.38 1078.63 1127.66 1319.6 1033.69 1240.43
80 7010.37 1168.4 1460.49 1269.99 2336.79 1219.19 1274.61 1491.57 1168.4 1402.07
Lead in km Cost / trip Lime murum Earth Manure or Excavated Sand Aggregate Soling Concrete Timber
building sludge rock stone 40 mm & stone block
rubbish aggregate above (form)
40 mm &
below
90 7814.55 1302.43 1628.03 1415.68 2604.85 1359.05 1420.83 1662.67 1302.43 1562.91
100 7656.58 1276.1 1595.12 1387.06 2552.19 1331.58 1392.11 1629.06 1276.1 1531.32
125 9428.95 1571.49 1964.36 1708.14 3142.98 1639.82 1714.35 2006.16 1571.49 1885.79
150 11054.72 1842.45 2303.07 2002.67 3684.91 1922.56 2009.95 2352.07 1842.45 2210.94
175 12490.94 2081.82 2602.28 2262.85 4163.65 2172.34 2271.08 2657.65 2081.82 2498.19
200 13913.19 2318.87 2898.58 2520.51 4637.73 2419.69 2529.67 2960.25 2318.87 2782.64
250 16818.88 2803.15 3503.93 3046.9 5606.29 2925.02 3057.98 3578.49 2803.15 3363.78
300 19141.73 3190.29 3987.86 3467.7 6380.58 3329 3480.31 4072.71 3190.29 3828.35
400 24679.35 4113.23 5141.53 4470.9 8226.45 4292.06 4487.15 5250.93 4113.23 4935.87
500 30403.97 5067.33 6334.16 5507.97 10134.66 5287.65 5527.99 6468.93 5067.33 6080.79
600 35860.83 5976.81 7471.01 6496.53 11953.61 6236.67 6520.15 7629.96 5976.81 7172.17
700 41428.16 6904.69 8630.87 7505.1 13809.39 7204.9 7532.39 8814.5 6904.69 8285.63
800 46977.45 7829.58 9786.97 8510.41 15659.15 8169.99 8541.35 9995.2 7829.58 9395.49
900 52302.8 8717.13 10896.42 9475.14 17434.27 9096.14 9509.6 11128.26 8717.13 10460.56
1000 57879.11 9646.52 12058.15 10485.35 19293.04 10065.93 10523.47 12314.7 9646.52 11575.82
STATEMENT V
Including loading, unloading and stacking
Lead in Cost / trip Cement Tar Steam coal Matting Sheet & Bricks Tiles half Glass Empty
km stone block, bitumenn thatching plate glass modular round tiles blocks cement
GI CI CC AC Asphalt bambu in packs bricks & & Roofing (hollow) bags
Pipes below roofing felt ceiling Paints & Traditional tiles 200x200
120 mm dia & Flooring board Distemper bricks cement x120 mm
Asphalt rubber s AC flooring
etc. PVC pipes Sheets & tiles
fittings fittings
iron
fittings
and iron
sheets
1 2 3 4 5 6 7 8 9 10 11
Pay load 7.0 Mt 4.5 MT 5.5 MT 3.0 MT 7.0 MT 3500 No. 3200 No. 1000 0No. 2000 No.
per 1 M.T. per 1 M.T. per 1 M.T. per 1 M.T. per 1 M.T. per 1000 per 1000 per 1000 per 1000
Nos. Nos. Nos. Nos.
0.5 708.54 101.22 157.45 128.83 236.18 101.22 202.44 221.42 70.85 354.27
1 767.21 109.6 170.49 139.49 255.74 109.6 219.2 239.75 76.72 383.61
1.5 824.62 117.8 183.25 149.93 274.87 117.8 235.61 257.69 82.46 412.31
2 879.67 125.67 195.48 159.94 293.22 125.67 251.33 274.9 87.97 439.84
2.5 936.53 133.79 208.12 170.28 312.18 133.79 267.58 292.67 93.65 468.27
3 991.02 141.57 220.23 180.19 330.34 141.57 283.15 309.69 99.1 495.51
3.5 1045.13 149.3 232.25 190.02 348.38 149.3 298.61 326.6 104.51 522.57
4 1098.5 156.93 244.11 199.73 366.17 156.93 313.86 343.28 109.85 549.25
4.5 1150.76 164.39 255.72 209.23 383.59 164.39 328.79 359.61 115.08 575.38
5 1203.27 171.9 267.39 218.78 401.09 171.9 343.79 376.02 120.33 601.64
6 1308.29 186.9 290.73 237.87 436.1 186.9 373.8 408.84 130.83 654.15
7 1412.08 201.73 313.8 256.74 470.69 201.73 403.45 441.28 141.21 706.04
8 1518.13 216.88 337.36 276.02 506.04 216.88 433.75 474.42 151.81 759.07
9 1614 230.57 358.67 293.45 538 230.57 461.14 504.38 161.4 807
10 1708.51 244.07 379.67 310.64 569.5 244.07 488.15 533.91 170.85 854.26
15 2045.63 292.23 454.58 371.93 681.88 292.23 584.47 639.26 204.56 1022.82
20 2512.91 358.99 558.42 456.89 837.64 358.99 717.97 785.28 251.29 1256.46
25 2876.53 410.93 639.23 523.01 958.84 410.93 821.87 898.92 287.65 1438.27
1 2 3 4 5 6 7 8 9 10 11
30 3335.18 476.45 741.15 606.4 1111.73 476.45 952.91 1042.24 333.52 1667.59
35 3501.54 500.22 778.12 636.64 1167.18 500.22 1000.44 1094.23 350.15 1750.77
40 3916.4 559.49 870.31 712.07 1305.47 559.49 1118.97 1223.88 391.64 1958.2
45 4327.67 618.24 961.7 786.85 1442.56 618.24 1236.48 1352.4 432.77 2163.84
50 4735.22 676.46 1052.27 860.95 1578.41 676.46 1352.92 1479.76 473.52 2367.61
60 5394.81 770.69 1198.85 980.87 1798.27 770.69 1541.37 1685.88 539.48 2697.41
70 6202.13 886.02 1378.25 1127.66 2067.38 886.02 1772.04 1938.17 620.21 3101.07
80 7010.37 1001.48 1557.86 1274.61 2336.79 1001.48 2002.96 2190.74 701.04 3505.19
90 7814.55 1116.36 1736.57 1420.83 2604.85 1116.36 2232.73 2442.05 781.46 3907.28
100 7656.58 1093.8 1701.46 1392.11 2552.19 1093.8 2187.59 2392.68 765.66 3828.29
125 9428.95 1346.99 2095.32 1714.35 3142.98 1346.99 2693.99 2946.55 942.9 4714.48
150 11054.72 1579.25 2456.6 2009.95 3684.91 1579.25 3158.49 3454.6 1105.47 5527.36
175 12490.94 1784.42 2775.76 2271.08 4163.65 1784.42 3568.84 3903.42 1249.09 6245.47
200 13913.19 1987.6 3091.82 2529.67 4637.73 1987.6 3975.2 4347.87 1391.32 6956.6
250 16818.88 2402.7 3737.53 3057.98 5606.29 2402.7 4805.39 5255.9 1681.89 8409.44
300 19141.73 2734.53 4253.72 3480.31 6380.58 2734.53 5469.07 5981.79 1914.17 9570.87
400 24679.35 3525.62 5484.3 4487.15 8226.45 3525.62 7051.24 7712.3 2467.94 12339.68
500 30403.97 4343.42 6756.44 5527.99 10134.66 4343.42 8686.85 9501.24 3040.4 15201.99
600 35860.83 5122.98 7969.07 6520.15 11953.61 5122.98 10245.95 11206.51 3586.08 17930.42
700 41428.16 5918.31 9206.26 7532.39 13809.39 5918.31 11836.62 12946.3 4142.82 20714.08
800 46977.45 6711.06 10439.43 8541.35 15659.15 6711.06 13422.13 14680.45 4697.75 23488.73
900 52302.8 7471.83 11622.84 9509.6 17434.27 7471.83 14943.66 16344.63 5230.28 26151.4
1000 57879.11 8268.44 12862.02 10523.47 19293.04 8268.44 16536.89 18087.22 5787.91 28939.56
STATEMENT VI
Including loading, unloading and stacking
Lead in km Cost / tripR.C.C. STEEL CYLINDER, R.C PIPES, C.I. PIPES,, UNREINFORCED CEMENT PIPES, PRECAST COCRETE PIPES
100 mm 125 mm 150 mm 200 mm 250 mm 300 mm 300 & 400 450 & 500 600, 700 800, 900 1200 &
mm mm & 750 mm & 1000 1800 MM
mm
Pay load in R 292.8 219.6 183 109.8 80.52 62.22 54.9 29.28 18.30 15 5
1 2 3 4 5 6 7 8 9 10 11 12 13
T PER 100 RMT
0.5 708.54 241.99 322.65 387.18 645.3 879.96 1138.77 1290.6 2419.88 3871.8 4723.6 14170.8
1 767.21 262.03 349.37 419.24 698.73 952.82 1233.06 1397.47 2620.25 4192.4 5114.73 15344.2
1.5 824.62 281.63 375.51 450.61 751.02 1024.12 1325.33 1502.04 2816.33 4506.12 5497.47 16492.4
2 879.67 300.43 400.58 480.69 801.16 1092.49 1413.81 1602.31 3004.34 4806.94 5864.47 17593.4
2.5 936.53 319.85 426.47 511.77 852.94 1163.1 1505.19 1705.88 3198.53 5117.65 6243.53 18730.6
3 991.02 338.46 451.28 541.54 902.57 1230.77 1592.77 1805.14 3384.63 5415.41 6606.8 19820.4
3.5 1045.13 356.94 475.92 571.11 951.85 1297.98 1679.73 1903.7 3569.43 5711.09 6967.53 20902.6
4 1098.5 375.17 500.23 600.27 1000.46 1364.26 1765.51 2000.91 3751.71 6002.73 7323.33 21970
4.5 1150.76 393.02 524.03 628.83 1048.05 1429.16 1849.5 2096.1 3930.19 6288.31 7671.73 23015.2
5 1203.27 410.95 547.94 657.52 1095.87 1494.37 1933.9 2191.75 4109.53 6575.25 8021.8 24065.4
6 1308.29 446.82 595.76 714.91 1191.52 1624.8 2102.68 2383.04 4468.2 7149.13 8721.93 26165.8
7 1412.08 482.27 643.02 771.63 1286.05 1753.7 2269.5 2572.09 4822.68 7716.28 9413.87 28241.6
8 1518.13 518.49 691.32 829.58 1382.63 1885.41 2439.94 2765.26 5184.87 8295.79 10120.87 30362.6
9 1614 551.23 734.97 881.97 1469.95 2004.47 2594.02 2939.89 5512.3 8819.67 10760 32280
10 1708.51 583.51 778.01 933.61 1556.02 2121.85 2745.92 3112.04 5835.08 9336.12 11390.07 34170.2
15 2045.63 698.64 931.53 1117.83 1863.05 2540.52 3287.74 3726.1 6986.44 11178.31 13637.53 40912.6
20 2512.91 858.23 1144.31 1373.17 2288.62 3120.85 4038.75 4577.25 8582.34 13731.75 16752.73 50258.2
25 2876.53 982.42 1309.9 1571.87 2619.79 3572.44 4623.16 5239.58 9824.21 15718.74 19176.87 57530.6
30 3335.18 1139.06 1518.75 1822.5 3037.5 4142.05 5360.3 6075.01 11390.64 18225.03 22234.53 66703.6
35 3501.54 1195.88 1594.51 1913.41 3189.02 4348.66 5627.68 6378.03 11958.81 19134.1 23343.6 70030.8
40 3916.4 1337.57 1783.42 2140.11 3566.85 4863.88 6294.44 7133.7 13375.68 21401.09 26109.33 78328
45 4327.67 1478.03 1970.71 2364.85 3941.41 5374.65 6955.43 7882.82 14780.29 23648.47 28851.13 86553.4
50 4735.22 1617.22 2156.29 2587.55 4312.59 5880.8 7610.45 8625.17 16172.2 25875.52 31568.13 94704.4
60 5394.81 1842.49 2456.65 2947.98 4913.31 6699.96 8670.54 9826.61 18424.9 29479.84 35965.4 107896.2
70 6202.13 2118.21 2824.29 3389.14 5648.57 7702.6 9968.06 11297.14 21182.14 33891.42 41347.53 124042.6
80 7010.37 2394.25 3192.34 3830.8 6384.67 8706.37 11267.07 12769.34 23942.52 38308.03 46735.8 140207.4
Lead in km Cost / trip R.C.C. STEEL CYLINDER, R.C PIPES, C.I. PIPES,, UNREINFORCED CEMENT PIPES, PRECAST COCRETE PIPES
100 mm 125 mm 150 mm 200 mm 250 mm 300 mm 300 & 400 450 & 500 600, 700 800, 900 1200 &
mm mm & 750 mm & 1000 1800 MM
mm
Pay load in R 292.8 219.6 183 109.8 80.52 62.22 54.9 29.28 18.30 15 5
1 2 3 4 5 6 7 8 9 10 11 12 13
90 7814.55 2668.9 3558.54 4270.25 7117.08 9705.1 12559.55 14234.15 26689.04 42702.46 52097 156291
100 7656.58 2614.95 3486.6 4183.92 6973.21 9508.92 12305.66 13946.41 26149.52 41839.23 51043.87 153131.6
125 9428.95 3220.27 4293.69 5152.43 8587.39 11710.07 15154.21 17174.77 32202.7 51524.32 62859.67 188579
150 11054.72 3775.52 5034.03 6040.83 10068.05 13729.16 17767.15 20136.1 37755.19 60408.31 73698.13 221094.4
175 12490.94 4266.03 5688.04 6825.65 11376.08 15512.84 20075.44 22752.17 42660.31 68256.5 83272.93 249818.8
200 13913.19 4751.77 6335.7 7602.84 12671.39 17279.17 22361.28 25342.79 47517.73 76028.36 92754.6 278263.8
250 16818.88 5744.15 7658.87 9190.64 15317.74 20887.83 27031.31 30635.48 57441.53 91906.45 112125.9 336377.6
300 19141.73 6537.48 8716.63 10459.96 17433.27 23772.64 30764.59 34866.54 65374.76 104599.6 127611.5 382834.6
400 24679.35 8428.74 11238.32 13485.98 22476.64 30649.96 39664.66 44953.28 84287.4 134859.8 164529 493587
500 30403.97 10383.87 13845.16 16614.19 27690.32 37759.53 48865.27 55380.64 103838.7 166141.9 202693.1 608079.4
600 35860.83 12247.55 16330.07 19596.08 32660.14 44536.55 57635.54 65320.27 122475.5 195960.8 239072.2 717216.6
700 41428.16 14148.96 18865.28 22638.34 37730.56 51450.77 66583.35 75461.13 141489.6 226383.4 276187.7 828563.2
800 46977.45 16044.21 21392.28 25670.74 42784.56 58342.59 75502.17 85569.13 160442.1 256707.4 313183 939549
900 52302.8 17862.98 23817.3 28580.77 47634.61 64956.28 84061.07 95269.22 178629.8 285807.7 348685.3 1046056
1000 57879.11 19767.46 26356.61 31627.93 52713.21 71881.66 93023.32 105426.4 197674.6 316279.3 385860.7 1157582
STATEMENT VII
Including loading, unloading and stacking
STONEWARE PIPES
Lead in Cost/trip 100 mm 150 mm 200 mm 230 mm 250 mm 300 mm 350 mm 400 mm
km
Pay Load 480 m 240 m 135 m 105 m 84 m 66 m 43 m 27 m
1 2 3 4 5 6 7 8 9 10
Unit Per 100 Rmt
0.5 708.54 147.61 295.23 524.84 674.80 843.50 1073.55 1647.77 2624.22
1 767.21 159.84 319.67 568.30 730.68 913.35 1162.44 1784.21 2841.52
1.5 824.62 171.80 343.59 610.83 785.35 981.69 1249.42 1917.72 3054.15
2 879.67 183.26 366.53 651.61 837.78 1047.23 1332.83 2045.74 3258.04
2.5 936.53 195.11 390.22 693.73 891.93 1114.92 1418.98 2177.98 3468.63
3 991.02 206.46 412.93 734.09 943.83 1179.79 1501.55 2304.70 3670.44
3.5 1045.13 217.74 435.47 774.17 995.36 1244.20 1583.53 2430.53 3870.85
4 1098.50 228.85 457.71 813.70 1046.19 1307.74 1664.39 2554.65 4068.52
4.5 1150.76 239.74 479.48 852.41 1095.96 1369.95 1743.58 2676.19 4262.07
5 1203.27 250.68 501.36 891.31 1145.97 1432.46 1823.14 2798.30 4456.56
6 1308.29 272.56 545.12 969.10 1245.99 1557.49 1982.26 3042.53 4845.52
7 1412.08 294.18 588.37 1045.99 1344.84 1681.05 2139.52 3283.91 5229.93
8 1518.13 316.28 632.55 1124.54 1445.84 1807.30 2300.20 3530.53 5622.70
9 1614.00 336.25 672.50 1195.56 1537.14 1921.43 2445.45 3753.49 5977.78
10 1708.51 355.94 711.88 1265.56 1627.15 2033.94 2588.65 3973.28 6327.81
15 2045.63 426.17 852.35 1515.28 1948.22 2435.27 3099.44 4757.28 7576.41
20 2512.91 523.52 1047.05 1861.41 2393.25 2991.56 3807.44 5843.98 9307.07
25 2876.53 599.28 1198.55 2130.76 2739.55 3424.44 4358.38 6689.60 10653.81
30 3335.18 694.83 1389.66 2470.50 3176.36 3970.45 5053.30 7756.23 12352.52
35 3501.54 729.49 1458.98 2593.73 3334.80 4168.50 5305.36 8143.12 12968.67
40 3916.40 815.92 1631.83 2901.04 3729.90 4662.38 5933.94 9107.91 14505.19
45 4327.67 901.60 1803.20 3205.68 4121.59 5151.99 6557.08 10064.35 16028.41
50 4735.22 986.50 1973.01 3507.57 4509.73 5637.17 7174.58 11012.14 17537.85
Lead in Cost/trip 100 mm 150 mm 200 mm 230 mm 250 mm 300 mm 350 mm 400 mm
km
Pay Load 480 m 240 m 135 m 105 m 84 m 66 m 43 m 27 m
1 2 3 4 5 6 7 8 9 10
60 5394.81 1123.92 2247.84 3996.16 5137.91 6422.39 8173.95 12546.07 19980.78
70 6202.13 1292.11 2584.22 4594.17 5906.79 7383.49 9397.17 14423.56 22970.85
80 7010.37 1460.49 2920.99 5192.87 6676.54 8345.68 10621.77 16303.19 25964.33
90 7814.55 1628.03 3256.06 5788.56 7442.43 9303.04 11840.23 18173.37 28942.78
100 7656.58 1595.12 3190.24 5671.54 7291.98 9114.98 11600.88 17806.00 28357.70
125 9428.95 1964.36 3928.73 6984.41 8979.95 11224.94 14286.29 21927.79 34922.04
150 11054.72 2303.07 4606.13 8188.68 10528.30 13160.38 16749.58 25708.65 40943.41
175 12490.94 2602.28 5204.56 9252.55 11896.13 14870.17 18925.67 29048.70 46262.74
200 13913.19 2898.58 5797.16 10306.07 13250.66 16563.32 21080.59 32356.26 51530.33
250 16818.88 3503.93 7007.87 12458.43 16017.98 20022.48 25483.15 39113.67 62292.15
300 19141.73 3987.86 7975.72 14179.06 18230.22 22787.77 29002.62 44515.65 70895.30
400 24679.35 5141.53 10283.06 18281.00 23504.14 29380.18 37392.95 57393.84 91405.00
500 30403.97 6334.16 12668.32 22521.46 28956.16 36195.20 46066.62 70706.91 112607.30
600 35860.83 7471.01 14942.01 26563.58 34153.17 42691.46 54334.59 83397.28 132817.89
700 41428.16 8630.87 17261.73 30687.53 39455.39 49319.24 62769.94 96344.56 153437.63
800 46977.45 9786.97 19573.94 34798.11 44740.43 55925.54 71177.95 109249.88 173990.56
900 52302.80 10896.42 21792.83 38742.81 49812.19 62265.24 79246.67 121634.42 193714.07
1000 57879.11 12058.15 24116.30 42873.41 55122.96 68903.70 87695.62 134602.58 214367.07
STATEMENT VIII
Including loading, unloading and stacking
Lead in Cost per Cement Steel pay Bulk M.S.Bar Sand
km trip pay load load Asphalt in 10.0 MT 5.75 cum
10.00 MT 10.00 MT Bouzer pay
load 4.50
MT
1 2 3 4 5 6 7
(Bd-A-1/259)
Lift 0 to 1.5 M Cu.m 134.00
Excavation for foundation / pipe trenches in hard murum including
2 removing the excavated material upto a distace of 50 M and lifts as
below, stacking and spreading as directed by Engineer-in-charge,
normal dewatering, preparing the bed for foundation and excluding
backfilling, etc. complete.
(Bd-A2/259)
Lift 0 to 1.5 M Cu.m 151.00
Excavation for foundation / pipe trenches in hard murum and
3 boulders, W.B.M. road including removing the excavated material
upto a distance of 50 M beyond the area and lifts as below, stacking
and spreading as directed by Engineer-in-charge, normal dewatreing,
preparing the bed for foundation and excluding backfilling, etc.
complete.
(Bd-A-3/259)
Lift 0 to 1.5 M Cu.m 169.00
Add for every additional lift of 1.5 M beyond initial lift of 1.5 M for Item Cu.m 13.00
4 Nos. 1 to 3
Excavation for foundation / pipe trenches in soft rock and old cement
5 and lime masonry foundation asphalt road including removing the
excavated material upto a distance of 50 M beyond area and lifts as
below, stacking as directed by Engineer-in-charge, normal
dewatering, preparing the bed for foundation and excluding
backfilling, etc. complete.
( Bd-A-4/259)
Lift 0 to 1.5 M Cu.m 449.00
Excavation for foundation / pipe trenches in hard rock by controlled
6 blasting, including trimming and levelling the bed by chiselling where
necessary and removing the excavated material and stacking it in
measurable heaps within a distance of 50 metres from the area and
lifts as below, normal dewatering, excluding backfilling, etc. complete.
(Bd-A-5/259)
Lift 0 to 1.5 M Cu.m 575.00
Excavation for foundation / pipe trenches in hard rock and concrete
7 road by chiselling, wedging, line drilling, by mechanical means or by
all means other than blasting including trimming and levelling the bed,
removing the excavated material upto a distance of 50 metres beyond
the area and lifts as below, stacking as directed by Engineer-in-
charge, normal dewatering, excluding backfilling, etc. complete by all
means.
(Bd-A-1/259)
Lift 0 to 1.50 M Cu.m 749.00
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
Excavation for foundation /pipe trenches in Slush Muddy/ Marshy
8 /Slushy /Soil including use of poclain, labour for dewatering during
execution including removing the excavated material upto a distance
of 50 metres and lifts as below, stacking and spreading as directed,
preparing the bed by cleaning the mud, labour required for execution
for shutterng item but excluding back filling etc. complete. Providing
and fixing shuttering shall be paid separately.
a) For Head Works on river or dam sub mergence for initial lift of 0 to 1.5 Cu.m 779.00
M
b) For Head Works on nalla or any other site of GSDA for initial lift of 0 Cum 551.00
to 1.5 M
c) Add for each additional lift to 1.5 M beyond initial lift of 1.5 M Cu.m 24.00
Excavation in general in soft material comprising of soft soil, soft
12 murum, sand, hard murum with boulders in wet or dry condition for
Head Works and allied works by well sinking process for average
depth of 12 M and lead of 150 M including shoring, barricading,
guarding, refilling, disposing of surplus excavated stuff as directed by
Engineer-in-charge, etc. complete.
Add for every additional lift of 1.5 M beyond initial lift of 15.0 M Cu.m 20.00
Dewatering the excavated trenches and pools of water in the building Bhp/Hr 60.00
14 trenches / pipeline trenches, well works by using pumps and other
devices including disposing off water to safe distance as directed by
Engineer-in-charge (including cost of machinery, labour, fuel), etc.
complete.
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
i) The contractor at his request may allowed to start construction of
masonary steining so as not to allow silting of well in oncoming
mansoon and while paying masonary, 25% amount shall be withheld
and released only when excavation to the full depth is completed.
Refilling the trenches with available excavated stuff with soft material Cu.m 60.00
15 first over pipeline and then hard material in 15 cm layers with all leads
and lifts including consolidation, surcharging, etc. complete.
Filling in plinth and floors murum bedding in trenches with approved Cu.m 60.00
16 murum from excavated materials from foundation 15cm to 20cm
layers including watering and compaction complete.
Filling in plinth and floors / trenches with contractors murum for Cu.m 629.00
17 bedding in 15cm to 20cm layers including watering and compaction
complete.
Providing dry trap / granite / quartzite / gneiss, rubble stone soling in Cu.m 869.00
18 15cm to 20 cm thick layers (including hand packing and compacting),
etc. complete.
Providing and filling in sand boxing in pipeline or for foundation with Cu.m 869.00
19 sand of approved quality including watering compaction, etc.
complete.
Open timbering in trenches of depth more than 1.5 m for shoring and
20 strutting including use of and waste of all necessary timber works
including walling, strutts, open polling boards/ horizontal sheeting,
runners, etc. as may be necessary and fixing and removal complete.
(Measurements to be taken of the face/area timbered)(NBO Item No.
4-15 page No.59 )
(Bd-C-3 /275)
Providing stuctural steel work in single stanchions composed of RSJ, M.T 58719.00
4 channel, etc, with caps, bases, mild steel plates, angles, brackets,
cleats, gusset plates, anchor bolts, etc. as per detailed design and
drawing or as directed by Engineer-in-charge including cutting,
fabrication, hoisting, erecting, fixing in position, making riveted/ bolted
/ welded connections and one coats of anticorrosive paint and over it
two coats of oil painting, etc. complete.
(Bd-C-6 /277)
Providing structural steel work in rolled sections like joists, channels, M.T 61655.00
5 angles, tees, etc. as per detailed designs and drawings including
fixing in position without connecting plates, braces, etc. and one coat
of anticorrosive paint and over it two coats of oil painting, of approved
quality and shade, etc. complete.
(Bd-C-2 /275)
Providing structural steel work in trusses, other similar trussed purlins M.T 72957.00
6 and members with all bracing, gusset plates, etc. as per detailed
design and drawing or as directed by Engineer-in-charge including
cutting, fabricating, hoisting, erecting and fixing in position, making
reveted / bolted / welded connections and one coat of anticorrosive
paint and over it two coat of oil painting, etc. complete.
(Bd-C-8 /278)
Section G - P.C.C.
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
2) These rates are applicable for RCC well works also. These rates
shall be increased by 10% for every 5 M depth below initial 5M depth.
3) Rates for Items No. 7 & 8 shall be increased by 5% for each brace
height above 1st brace for RCC ESRs by 5% for every ring beam
below 1st ring beam for RCC wells.
4) Volumatric mix as per 1:1.5::3 shall be adopted with 56.5 Kg. of
cement for RCC 250 and 59.5 Kg. of cement for RCC 300 per load of
mixer of 1 bag capacity .
5) All rates of reinforced cement concrete items for 1to 6 shall be
increased by 2% for every floor height above ground floor for building
works.
6) Fusion bounded epoxy coating to proposed only in coastel area
with prior approval of Chief Engineer
a Capacity of E.S.R. upto 2 lakh litres and stagging upto 12.00 M height
9 Providing and applying two coat of Gamma coating or equivalent such Sq.m 278.00
as Dr.Bake, Krishna conchem, Asian Paints, atul Limited Burger
paints epoxy primer 50 to 60 microns thick and covering two coats of
Gamma coatings or equivalent such as Dr.Bake, Krishna conchem,
Asian Paints, atul Limited Burger paints 30 microns thick each to new
M.S.Pipes and structural Steel or concrete surface including preparing
the surface by finishing by solvent degreasing and de-rusting by
applying chemical method and scaffolding if necessary etc. complete
as per manufacturers specifications.
1 80 mm No 1676.00
2 100 mm No 1896.00
3 125 mm No 2104.00
4 150 mm No 2360.00
5 200 mm No 2510.00
6 250 mm No 2978.00
7 300 mm No 3620.00
8 350 mm No 4412.00
9 400 mm No 5143.00
10 450 mm No 5943.00
11 500 mm No 7338.00
12 600 mm No 12441.00
13 700 mm No 15413.00
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
14 750 mm No 19475.00
15 800 mm No 24902.00
16 900 mm No 32768.00
17 1000 mm No 45587.00
Note : Only 75% rate shall be payable till satisfactory hydraulic testing
is given.
11 Dismantling dead pipeline of M.S./R.C.C./ C.I./ P.S.C. and G.I./ A. C. /
P. V. C. / S. W. / H. D. P. E. pipe including cost of necessary
excavation and refilling of trenches, breaking the joints, lifting the
pipes and stacking to the place as directed by Engineer-in-charge with
all leads and lifts including cleaning the surface, etc. complete.
a As above but when R.C.C. platform or Precast standpost issued free No. 2566.00
of cost.
13 Providing and constructing two taps standpost as per type design wih No 7484.00
excavation 15cm thick boulder filling,15 cm thick PCC 1:3:6 bedding
20 mm thick PCC 1:2:4 concrete for platform of 1.75 M dia. with side
curb and bucket rest, 80 mm dia, heavy duty GI pipe central post duly
filled therein with C. C. 1:2:4, 5 M long, 20 mm dia. medium G.I. pipe
from point of tapping to standpost additional 20 mm dia G.I. pipe fixed
vertically upto 15 mm dia self closing water taps, one brass ferrule etc.
complete together with all labour and material charges as per drawing
and as directed by Engineer-in-charge when B.C.Soil is available.
Rate includes draining arrangemment by excavating open gutters.
a As above but when R.C.C. platform or Precast standpost issued free No 4633.00
of cost.
14 RATES FOR ROAD AND RAILWAY CROSSING BY PUSH
THROUGH METHOD
Pushing of M.S. pipe of following dia for road crossing and
Railway crossing by push through method in all types of strata
by using hydraulic jack and drilling machine of required
diameter, below 3.0 m depth including lowering, laying, jointing
of M.S.casing pipe including cost of all labour, fuel and
material,required welding machinery,tripod, chain pulley
block,crane , blower etc.,transportation and Dewatering
etc.complete as directed by Engineer-in-charge but excluding
cost of M.S. Pipes.
a 200 mm dia to 499 mm dia M.S.pipe Rmt
b 500 mm dia to 1000 mm dia M.S.pipe Rmt
Section - I - ( XVII ) - TREATMENT PLANT ( W.T.P. & S.T.P. )
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 2 3 4 5
WATER TREATMENT PLANT ( W.T.P.)
1 Designing (aesthetically), providing and constructing high rate
Unconventional Water Treatment Plant i.e. Simplified Water
Treatment Plants consisting of Civil Works, including cost of
providing and applying Epoxy paint to inside surface of water
retaining structures in contact with Chlorine and providing anti-
termite treatment to entire structure below ground level,
Mechanical and Electrical components of variours sub-works
as given below : including necessary hydraulic testing,
structural testing and trial run for 3 months, etc. complete as
directed by Engineer-in-charge .
( turn-key job ).
1) Aeration fountain
2) Inlet arrangements
3) Mixing channel with ventury flume and flow measuring
arrangement.
4) Inlet channel
5) Flocculator- Confirming to I.S. 7208-1974 ( Type-C )
with detention period of 30 minutes.
6) Tube Settlers - " Designing, fabricating and construct
Tube Settlers with square or any other shaped tube like
Circular, Cheveron, Hexagonal etc. having proven
7) Rapid sand gravity filters.
8) Filter house
9) Chemical house
10) Alum tanks 2 Nos. with mixing, carrying and dosing
arrangement with piping.
11) Gravity feed gas chlorinator with 100% standby.
12) TCL solution tank with mixing, carrying and dosing
arrangement with piping.
13) Bye-pass arrangement
14) External and internal electrification
15) Laboratory equipments
16) Wash water tanks of capacity equal to 2% of designed
quantity of filtered water in a day ( + ) 10%
17) Wash water pumps with 100%standby
18) Pure water sump capacity equal to 1 hour pumping
capacity
19) Pure water pump house over the sump / by the side of
sump
20) Drainage arrangements
21) Alum store
22) Sanitary block with necessary water supply and drainage
arrangement and internal WBM roads
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 2 3 4 5
23) These rates are applicable for seismic zones 2, 3, and
4
Gas Hoder:
Designing, Providing and constructing gas holder having gas
collection system gas flow meter and gas burner with floating
dome arrangment and storage time 6 hrs. to be constructed in
M-300 having appropriate diameter as per detailed
specification and obligatory provisions. The flating dome shall
be of 8mm thick M.S. plate minimum and shall be provided
with two coats of anticorrosive epoxy coating from both faces.
Outfall Sewer :
Designing providing and constructing approprate Outfall
Sewer of RCC NP-2 pipe to discharge treated effluent,
untreated effluent from outlet chamber ( after secondary
clarifier) to the local nalla at a point shown on the drawing
including necessary chambers for inspection/ cleaning
including necessary excavtion dewatering refilling, concrete
encasing/ bedding ,concrete steps to reach the nalla bed level.
pitching and energy dissipation chamber in the nalla portion
etc. complete upto 50 m length RCC NP-2 pipe line and
inclding all above items
Piping work in C.I.L.A. class including Sluice valves,
Reflux valves M.S.Gate.
Providing laying and jointing pipe other than those already
included in the above items for interconnection by-pass drains
etc. ofall units including adequate numbers of manhole
chambers. The item includes excavation, refilling and
hydraulic testing of pipes, valves, gates, accessories and cost
of jointing material . The item includes required channels with
gates for interconnection of units by pass drains etc. for all
units and as directed etc. complete. as per detailed
specification.
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 2 3 4 5
Administrative Building Cum Laboratory ( G+ 1)
Designing, providing and constructing Administrative
Building office cum Laboratory including stores. This shall be a
building having appropriate Carpet area at ground floor and at
first floor complete as per specifications including necessary
excavation , foundation in RCC M-200 framed structure, B.B.
Masonary ( II-Class inC.M. 1:6) 20mm cement plaster in C.M.
1:3, inside and outside painting ,Alluminium door and window
with glass pannels mosaic tile flooring and skirting and all
other allied items, fixtures fastening electrification arrangement
water supply arrangement etc. complete. The building will
have laboratory on upper flor of administrative building and
should be so centralised that it should not be attached with
any units but should have complete control of every unit as per
Laboratory Equipment, beautification, telephone and intercom
arrangement and wireless system etc. complete.
UNITS INCLUDED
1 INLET CHAMBER
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 2 3 4 5
Designing, providing and constructing commissioning and
hydraulic testing Inlet chamber for the peak flow of 2 DWF
including necessary excavation in all types of strata including
walkway1.2 m wide all round the periphery.
CIVIL ITEM- All component of inlet chamber shall in RCC M30
only
MECHANICAL ITEM - CI Gates with phosphor bronze
sealing face /strips with extension rod, head stock, operating
wheels. Pipe railing shall be in GI pipe with MS angle post
.etc. The work includes providing and making
necessary arrangements to connect the flow to screen
chamber by approach channel as directed and as per
specifications.
2 SCREEN CHAMBER
Designing, providing, constructing, testing and commissioning
of screen chamber, designed for average 1 DWF and
maximum peak flow of 2 DWF. This unit shall be provided free
board of 0.5 m minimum, RCC walkway 1.2 m wide with GI
pipe railing, RCC stair case of 1.0 m width from GL to screen
chamber. CIVIL ITEM -
All component shall be in RCC M-30 only,
MECHANICAL ITEM - All screens provided
(Mechanical/Manual) with MOC SS 304 with belt conveyor
mechanism , Piping of CI/DI/MS .
3 DETRITUS TANK
Designing, providing ,constructing, testing and commissioning
continuous grit removal type Detritus tank, mechanically
operated capable of removing 100% of 0.2 mm size particle
and above, having specific gravity 2.30 designed for one peak
flow of 2 DWF with suitable arrangement of separation of grit
from putrescible solids. Inlet and outlet channels of required
sizes as may be required to connect the flow to connecting
unit etc. Complete including hydraulic testing for water
tightness of structure having minimum FB of 0.3 m, wash out
arrangement to grit chamber and platform 1.2 m wide RCC
walkway with GI wide RCC walkway with GI pipe handling
shall be provided. Item to include closed Chute of GI sheet to
convey the grit to the hand cart placed below it and two hand
carts . All arrangements shall be as detailed specifications
and as directed.
CIVIL ITEM :- All component shall be in RCC M30 only.
MECHANICAL ITEM:- All component of grit mechanism
shall of MSEP and approved make with adequate HP
electrical motor to run the mechanism .
4 BIOTOWER
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 2 3 4 5
Designing, providing , constructing, testing and commissioning
in RCC (M-30), BIOTOWER according to drawings' received
from technology provider , for biological removal of BOD in
compartments to handle combine flow of 2 DWF and to be
checked for peak flow incoming flow including construction of
Tower with Media , rotating arm with sprayers and providing
1.2 m wide clear approach walkways, wherever necessary,
including foundations etc. as per specifications.,including PVC
Media , sprinkler system with rotating arm / equipment and FB
0.5 m and SWD as required. Peak factor shall be 2
Biotower recycle sump of adequate capacity including
pumpsnshall be provided to maintain the wetting rate of bio-
tower to lean flow conditions
CIVIL ITEM :- All component shall be in RCC M30 only.
MECHANICAL ITEM:- PVC Media , Sprinkler system in MS
pipes epoxy painted, recirculation system &required piping of
CI /MS epoxy painted etc.
4A MIXING CHAMBER
Designing, providing , constructing, testing and commissioning
in RCC (M-30), MIXING CHAMBER to handle flow of 1 DWF
and recirculation flow including construction of baffel walls ,
foundations etc. as per specifications., to ensure complete
mixing of raw sewage received from Bio-tower and
recirculation flow from SST , capacity of mixing chamber shall
be as per designer requirement.
CIVIL ITEM :- All component shall be in RCC M30 only.
10 Sludge Thickener
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 2 3 4 5
Designing, providing ,constructing, commissioning and testing
of sludge thickener -gravity type with inlet & Outlet pipes ,
Central feed well , sludge pit & sludge removal arrangement ,
with necessary walkway all around of 1.20m wide with GI
railing inter connecting piping all complete with necessary
fixed bridge scraper arrangement as per detailed specification
.CIVIL ITEM - All component shall be in RCC M-30only,
MECHANICAL ITEM - fixed bridge shall be in MS and All
component in contact water shall be MSEP/CI.Piping shall be
of CI.
11 CENTRFUGE UNIT
Designing, providing, constructing , installing ,commissioning
and testing centrifuge unit to handle the sludge flow of 1 day
in 20 hours per unit with sludge dewatering unit drain etc.
complete as per specification. Sludge feed pumps with the
necessary arrangement, as per detailed specification
mentioned in tender and obligatory provisions to be provided
with satisfactory functioning. CIVIL ITEM - All component
shall be in RCC M-30only, MECHANICAL ITEM -all
mechanical items shall be provided as per specification
confirming to Relevant IS, and Piping shall be of CI/HDPE.
Chute in GI , Decanted water piping in PVC .
12 Outfall Sewer
Designing, providing and constructing appropriate outfall
sewer of RCC NP2 pipe, to discharge treated effluent from
outlet chamber after chlorination tank to the local Nallah at the
point shown on the drawing including necessary chamber for
inspection and cleaning including necessary excavation,
dewatering, refilling concrete encasing / bedding concrete
steps to reach the nallah bed level, pitching and energy
dissipation chamber in nallah portion etc. complete up to 50 m
length RCC NP2 pipe line and including all above items.
8. Sludge Sump
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 2 3 4 5
Designing, providing & constructing of sludge sump and pump
for discharging sludge to sludge thickener using MS pipe
complete as per detailed specification.
9. SIudge Thickener
Designing, providing & constructing water tight of sludge
thickener - gravity type in RCC (M-25) with inlet & outlet pipes,
central feed well, sludge it & sludge removal arrangement,
grouting wherever necessary with walkway all around of 1.20
m with GI pipe railing interconnecting CI pipes all complete as
per specifications, having bottom slope 1:8 & 3 m SWD with
necessary fixed bridge scraper arrangement as per detailed
specifications & necessary inlet & outlet arrangement. All
other arrangement as per detailed specifications.
UNITS INCLUDED
1. Inlet Chamber
Designing, providing, and constructing RCC (M:250) inlet
chamber for the peak low of 2 DWF including necessary
excavation in all types of strata including walkway all around
the periphery. Each compartment will have phosphor bronze
steel gates with extension rod, head stock, operating wheels.
GI pipe railing etc. The work includes providing and making
necessary arrangements to connect the flow to screen
chamber by approach channel as directed and as per
specifications.
2. Screen Chamber
Designing, providing, constructing, testing and commissioning
of screen chamber, designed for average 1 DWF and
maximum peak flow of 2 DWF in RCC (M -250), including inlet
pipe / channel from inlet chamber, outlet pipe channel to
detritus tank, free board of 0.5 m minimum, RCC walkway 1.2
m wide with GI pipe railing, RCC stair case of 1.2 m width from
GL to screen chamber.
3. Detritus Tank
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 2 3 4 5
Designing, providing and constructing continuous grit removal
type of Detritus Tank, mechanically operated in RCC (M 250)
capable of removing 100% of 0.2 mm size particle and above,
having specific gravity 2.30 designed for one peak 2 DWF with
suitable arrangement of separation of grit from putrescible
solids. Inlet and outlet channels of required sizes as may be
required to connect the flow to connecting unit etc. Complete
including hydraulic testing for water tightness of structure
having minimum FB of 0.3 m, wash out arrangement to Grit
chamber and platform 1.2 m wide RCC walkway with GI pipe
handling shall be provided. A pit for collecting grit conveyed by
conveyor shall be provided. It should be suitable to handle the
grit for carting. All arrangements shall be as detailed
specifications and as directed.
4. CASP Basins
Designing, providing and constructing in RCC (M:250), CASP
basins for biological removal of BOD along with nitrification,
denitrification, Bio-P removal in compartments to handle
combine flow of 1 DWF incoming flow and recirculation flow
including construction of selector compartments and providing
1.2 m wide clear approach walkways, expansion joints
wherever necessary, including foundations etc as per
specifications. Peak factor shall be 2, F/M ration shall be 0.15,
complete with air blowers, fine diffused aeration grid /
equipment and FB 0.5 m and SWD as required. DO level in
basin to be minimum 2 mg/l complete with "Oxygen Uptake
Rate" control system and all related instruments. Stainless
steel decanters and automation works. MLSS concentrations
shall be 2000-5500 mg/l or more, MLVSS to MLSS ratio to be
0.8. HRT shall be between 12 to 13 hrs and SRT suitable for
fully disgested sludge. It should have all other related works as
per detailed specification. In Case CASP is designed to
achieve N, P removal HRT shall be between 15-18 hrs and
SRT shall be suitably provided to achieve N, P removal.
NOTES
a These Rates are for Civil Works, in M30 grade RCC.
b Water Table is considered at 5 m below ground level.
c Soil bearing capacity considered as 20 T/m at 1.5 m below
ground level.
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 2 3 4 5
d OPC has been considered for costing purposes.
providing and fixing accessories such as M.S. ladder inside and outside,
C.I. Manhole frame and cover, at top slab, B.B. masonry chamber for all
valves, ventilating shafts, including giving satisfactory hydraulic test and
water tightness test as per IS code and providing three coat of cement
paints to all expose surface of structure including roof surface etc.
complete as per design data, criteria, obligatory requirements and
detailed specifications.Anti-termite treatment shall be given for
underground portion of the structure.
Note:-
1. The designing shall be in accordance with various relevant I.S.
specification ( I.S. 456/2000, I.S. 875- 1987, I.S. 3370-1965 or revised
2. Only M.S bars grade I confirming to I.S. 432 Part_I or high yield
strength deformed bars confirming to I.S. 1786 or I.S. 1139 shall be
used grade II M.S. bars shall not be used
3) Entire structure shall be in M-300 only.
4) The scope of pipe assembly work shall be upto 5 Meter beyond
outside face of the wall, cost of pipes valves and specials is not included
in the rate but labour cost for laying and jointing is included
Notes:
1. The design of the structure be in accordance with relevent
(I.S.3370 - 1965 or revised)
2. The design shall satisfy the stipulation as per IS 1893-1984 and
I.S. 13920/1993 for seismic focrce and I.S.- 11682/1985 for R.C.C.
staging of overhead tanks.
3. For design having more than 6 columns, Providing of internal
bracing is obligatory,. External bracking is also obligatory.
4.. The entire structure shall be in M 300 mix only.
5. Plain round mild steel bars grade - I confirming to I.S,432 Part-I or
high yield strengh deformed bars confirming to I.S. 1786 or I.S. 1139
shall be used, grade-II mild steel bars will not be allowed.
9. These rates are including the cost of uplift pressure if any and
entire dewatering during execution. In case of water logging area
where water is struck at shallow depth extra provision of dewatering
shall be made as per site condition.
10. All condition given in the Member Secretary"s Circular
No.MJP/TS-I/350/1668 dt. 2.8.97 and MJP/S-I/350/2127 dt. 13.7.99
shall be strictly followed and additional cost, if any due to these
conditions is included in the rates mentioned below.
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
11.. 75% part rate shall be payable for reinforced cocnrete and
plastering items of containers of E.S.R. till satisfactory hydraulic
testing for water tightness is given ; and till that work shall be treated
as incomplete.
12. The rates indicated in the table are excluding the cost of pipes,
specials and valves required for inlet, outlet washout overflow and by-
pass arrangement. The scope of work, however inclueds cost of
erecting, laying and jointing of pipes and valvews including cost of
jointing materials upto 5M beyond outer face of outermost column.
13. For ESR upto 500cum capacity C.I.D. double flanged pipes upto
300mm dia shall be provided and C.I.Specials shall be used.For ESR
above 500 cum capacity C.I./M.S. pipes assembly with minimum
8mm thick ness up to 500mm dia. And minimum 10mm thickness
above 500mm dia can be used with proper anti-corrosive epoxy
teratment from inside and outside.
14. Below mentioned rates are for foundation, with individuals footing
with bearing capacity of 30 tonnes per square metre. For raft
foundations, these rates shall be increased by 7.5%
wheresafebearing capacity ( SBC) is 5 M.T. per Sq.m and by 5%
where SBC is more than 5 MT/Sqm. and upto 10MT/Sq.m. This
percentage of 5% or 7,5% is applicable for estimation of amount of
L.S. items ESR for Extra item due to change from individual footing
foundation to raft actual increase in concrete and steel quantities be
paid as per relevent DSR Item.
15. The rates shall be increase by 30% for brearing piles upto depth
of 10m and for further increased in depth by 5M each it shall be
increased by another 10% These rates are applicable where raft is
not reasible for pile foundation sulfate resistant cement shall only be
used. Single pile for the column is not permitted Group of piles shall
be designed with pile cap for each column of ESR.
Note: Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for
balance depth exceeding 1.2 M )
Valve Chamber with Precast R.C.C. covers.
A. As above of 60 x 45 cm internal size and depth upto 0.9M . No 4227.00
a). Add for every increase of depth of 30cm or part thereof. 30cm depth 893.00
B. As above of 90 x 45 cm internal size and depth upto 1.2M . No 6232.00
a). Add for every increase of depth of 30cm or part thereof. 30cm depth 1069.00
C. As above of 90 x 60 cm internal size and depth upto 1.2M . No 6779.00
a). Add for every increase of depth of 30cm or part thereof. 30cm depth 1157.00
D. As above of 90 x 90 cm internal size and depth upto 1.2M . No 8129.00
a). Add for every increase of depth of 30cm or part thereof. 30cm depth 1337.00
E As above of 90cminternal dia size & depthupto No 6145.00
1.2 M with precastRCC slab cover
a). Add for everyincrease of depth of30cm or part 30cm depth 1038.00
thereof.
F. As above of 1.2 x 1.2 M internal size and depth upto 1.2M . No 10922.00
a). Add for every increase of depth of 30cm or part thereof. 30cm depth 1699.00
G. As above of 1.5 x 1.5M internal size and depth upto 1.5M . No 15961.00
a). Add for every increase of depth of 30cm or part thereof. 30cm depth 2100.00
2 Providing and constructing B.B. masonry valve chamber with 15 cm
thick 1:3:6 proportion PCC bedding, excluding excavation, B.B.
masonry in C.M. 1:5 proportion 12 mm thick cement plaster in cm 1:4
proportion on both sides with providing and fixing C.I. manhole frame
and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion 15 cm thick
slab,etc.complete as directed by Engineer-in-charge.
(Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for
balance depth exceeding 1.2 M)
Valve Chamber with Cast iron frame & covers.
A. As above of 60x45 cm internal size and depth upto 0.9 M with 60 x 45 No 7182.00
cm size CI manhole frame and cover of 40 kg
a). Add for every increase in depth of 30cm or part thereof 30cm depth 893.00
B. As above of 90x45 cm internal size and depth upto 1.2 M with 90 x 45 No 9048.00
cm size CI manhole frame and cover of 40 kg
a). Add for every increase in depth of 30cm or part thereof 30cm depth 1069.00
C. As above of 90x60 cm internal size and depth upto 1.2 M with 90 x 60 No 10392.00
cm size CI manhole frame and cover of 50 kg
a). Add for every increase in depth of 30cm or part thereof 30cm depth 1157.00
D. As above of 90x90 cm internal size and depth upto 1.2 M with 53 cm No 14694.00
dia CI manhole frame and cover of 90 kg fixed in R.C.C. Slab
a). Add for every increase in depth of 30cm or part thereof 30cm depth 1337.00
E. As above of 1.2 x 1.2M internal size and depth upto 1.2 M with 53 cm No 16985.00
dia CI manhole frame and cover of 90 kg fixed in R.C.C. Slab
a). Add for every increase in depth of 30cm or part thereof 30cm depth 1699.00
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
F. As above of 1.5 x 1.5 M internal size and depth upto 1.5 M with 53 No 21509.00
cm dia CI manhole frame and cover of 90 kg fixed in R.C.C. Slab
a). Add for every increase in depth of 30cm or part thereof 30cm depth 2100.00
3 (Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for
balance depth exceeding 1.2 M)
Valve Chamber with Precast steel fibre reinforced
concrete ( S.F.R.C.) frame & covers.
As above of 60x45 cm internal size and depth upto 0.9 M . No 6214.00
A. a). Add for every increase in depth of 30cm or part thereof 30cm depth 893.00
As above of 90x45 cm internal size and depth upto 1.2 M . No 8755.00
B. a). Add for every increase in depth of 30cm or part thereof 30cm depth 1068.00
As above of 90x60 cm internal size and depth upto 1.2 M . No 9518.00
C. a). Add for every increase in depth of 30cm or part thereof 30cm depth 1157.00
As above of 90x90 cm internal size and depth upto 1.2 M . No 11424.00
D. a). Add for every increase in depth of 30cm or part thereof 30cm depth 1337.00
As above of 1.2 x 1.2M internal size and depth upto 1.2 M with No 14150.00
S.F.R.C. frame and cover of size 540 mm dia fixed in R.C.C. Slab
E. a). Add for every increase in depth of 30cm or part thereof 30cm depth 1700.00
As above of 1.5 x 1.5 M internal size and depth upto 1.2 M with No 18944.00
S.F.R.C. frame and cover of size 540 mm dia fixed in R.C.C. Slab
a) Rebate for every decrease in depth of 50 cm or part thereof 50cm depth 2332.00
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
7 Providing and constructing on sewer, B.B. masonry circular manhole No 48924.00
concentric cone 1.5 M dia. at bottom and 0.5 M dia. at top and upto a
depth of 5.00 M with 23 cm brick work up to depth of 2 M from top
and 35 cm thick brick work for balance depth in CM 1:4 proportion
with 20 mm thick smooth plaster on both side in cm 1:2 proportion
excluding excavation including foundation concrete 250 mm thick and
haunches and channels in c.c.1:2:4 proportion, finishing channels in
smooth rendering, providing C.I. dapuri type steps each weighting 5.5
kg., 1:2:4 coping and providing and fixing approved make and quality
S.F.R.C. frame and cover of 56 cm.dia. etc. complete as directed by
Engineer-in-charge.
a) Rebate for every decrease in depth of 50 cm or part thereof 50cm depth 4849.00
a) Rebate for every decrease in depth of 50 cm or part thereof 50cm depth 6130.00
a). Extra for every 0.5 M depth beyond initial depth of o.60 M 50cm depth 610.00
11 As above but for 200 mm dia. Pipes & depth 0.60 M No 2346.00
a). Extra for every 0.5 M depth beyond initial depth of o.60 M 50cm depth 730.00
12 As above but for 250 mm dia. Pipes & depth 0.60 M No 2796.00
a). Extra for every 0.5 M depth beyond initial depth of o.60 M 50cm depth 907.00
13 As above but for 300 mm dia. Pipes & depth 0.60 M No 3396.00
a). Extra for every 0.5 M depth beyond initial depth of o.60 M 50cm depth 988.00
14 As above but for 400 mm dia. Pipes & depth 0.60 M No 4768.00
a). Extra for every 0.5 M depth beyond initial depth of o.60 M 50cm depth 1461.00
15 As above but for 500 mm dia. Pipes & depth 0.60 M No 6454.00
a). Extra for every 0.5 M depth beyond initial depth of o.60 M 50cm depth 1778.00
16 As above but for 600 mm dia. Pipes & depth 0.60 M No 8396.00
a). Extra for every 0.5 M depth beyond initial depth of o.60 M 50cm depth 1961.00
17 Providing and fixing in position steel fibre reinforced concrete
(S.F.R.C.) frame and covers of approved make including loading,
unloading, transportation, all taxes, etc. complete as directed by
Engineer-in-charge (20 tonnes capacity)
a) 540 mm dia No 2632.00
b) 560 mm dia No 3271.00
c) 90 x 45 cm size No 2632.00
d) 90 x 60 cm size No 2853.00
e) 60 x 60 cm size No 2606.00
f) 60 x 45 cm size No 2258.00
Section - I(XXI) : Well Sinking and River Infiltration Works
Sr No Item Description Unit Rate Rate
( in Rs.) ( in Rs.)
2012-2013 2013-2014
1 Providing, constructing coffer dam in river basin / dam storages as per Cu.m 499.00
type design including excavation, filling the middle portion with B. C.
soil (in gunny bags if required). Providing impervious / semipervious
materials on both side of B.C. soil (in gunny bags if required) including
ramming, compacting to the satisfaction of Engneer-in-charge, till the
completion of work including dismantling coffer dam after completion
of works and disposing off the material as directed by the Engineer-in-
charge.
Note: Pay line maximum - Top width payble shall be 2 mtr. and
maximum payble side slopes shall be 1.5 Horizontal to 1
Vertical, if the constructed top width of the side slopes are less, then
the measurements at actual are payble. Extra top width or flatter
slopes are not payble. Contractor is free to use ballies, plastic sheets,
piles, pipes, C.G.I. sheets for supporting hearting materials instead of
impervious/ semipervious hearting materials for which no extra
payments shall be payble. 30% payment shall be withheld for
dismentaling of coffer dam. this foot note shall appear in tender
condition. ( Type section is shown on last page of type design section
of CSR. )
3 Providing and filling puddle (selected good impervious clay) in Cu.m 229
Kolhapur type weirs in proper layers of 15 cm including watering,
ramming and compaction, etc. complete with all leads and lifts.
4 Providing and filling around the well boulders filling of selected variety Cu.m 683.00
and size of boulders including cost of all materials, labour,
transportation, etc. complete with all leads and lifts.
5 Providing, and fixing 80 mm dia A.C./P.V.C. pipe weep holes at 1.5 M RMT 175.00
c/c staggered including cost of all materials and labour involved with
all leads and lifts.etc. complete with all leads and lifts.
10 Providing and fixing in position C.I. Type dapuri steps of 22 mm dia. No 300.00
M.S. bar step with proper anchorage, etc. and providing and applying
3 coats of ant-corrosive paint, etc complete as directed by Engineer-in-
charge.
11 Providing and fixing M.S. sluice gates in position as per detailed Kg 91.00
drawing and specification including cost of all materials, labour,
operating pedestal, connecting rod, painting with three coats of anti-
corrosive paint, etc. complete as directed by Engineer-in-charge.
12 Providing and fixing in position C.I. /M.S. rose pieces in intake wells Kg 90.00
including cost of all materials and labour, painting with three coats of
anti-corrosive oil paint, etc.complete as directed by Engineer-in-
charge.
Note : This type of pipe anchorage shall be provided at 30 M centre to
centre on alternate side of pipeline for full width of nalla or river.
13 Prvoding and spreading around the well 1 mm thick polyethylene Sq.m 20.35
sheet complete as directed by Engineer-in-charge.
5 Providing and fixing in position M.S. ladder 0.50 M wide consisting of RMT 1400.00
75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in
double rows as steps placed at 25 cm c/c including cost of material
and labour involved, welding, anchoring and applying 3 coat of anti-
corrosive paint, etc. complete as directed by Engineer-in-charge.
7 Providing and constructing RCC spiral staircase in M-150 mix RMT 6415.00
concrete at site of work and consisting of central vertical column of
400 mm dia and steps in RCC M-150, tie members at each brace
level, RCC parapet wall 80 cm high including cost of all labour and
material involved, cost of scaffolding, centering, shuttering, curing,
finishing in CM 1:3 proportion including RCC M-150 footing
foundation, its excavation, refilling and cleaning the site, etc.
complete as per type design, with 3 coats of cement paint.
For Extra stage height over 15M or part thereof and water depth Mtr 907.00
over 5 M or part thereof
10 Providing and Erecting, installing and commissioning Barometric Leg
Chlorination system for water treatment plant upto 5 MLD. capacity
as per manufacturers specifications with all required materials viz. 15
Kg. pressure yellow PVC pipe, specially prepared chamber, mixing
chamber, scrubber unit, gas pressure flexible pipe, brass nozzle
nipple, electronic alarm unit, PPM dose, indicator of 25 mm dia. 4mm
thick glass tube (Borosil), gas ubit opening spanner 3 hole type,
instruction board, aluminium pipe upto sump ( Maximum length 15
Mtr.) etc. including civil works wherever required for above material
fittings, including satisfactory test and trial at work site etc. complete.
( Item do not include construction of chlorine Gas Room of 3.0 x 3.0
Mtr. or adequate size).
12 Providing and fixing water level indicator upto 5 M height including No 5249.00
M.S. enamelled gauge plate 150 mm wide 3 mm thick, P.V.C.float,
providing and fixing required accessories such as pointer, pulleys,
nylon thread including cost of all material, labour, etc. complete.
Section - K - Trial Run
Sr No Item Description Unit Rate Rate
( in Rs.) 2012- ( in Rs.)
2013 2013-2014
1 Commisioning running and maintaining the scheme to quantites, rated
capacity, including manning necessary personnel such as operator,
valveman, etc. as per requirements of the scheme and who should
also administer chemical dose for a period of 1 month for individual
scheme and 3 months for regional scheme, together with training of
personnel spared by MJP/ Local Body and handing over the scheme
to Local Body after completion of the above period as directed by
Engineer-in-charge.
c) For regional scheme upto 3 villages with raw water pumping, one Job 130081.00
treatment plant with pumps, raw water pumping main, leading main,
ESR, BPT and distribution system etc. ( 6 months) (Without WPT).
d) For regional schemes more than 3 villages, trial period shall be Job 407997.00
one year with raw water pumping , one treatment plant with
pumps,raw water pumping main, leading main,ESR, BPT and
distribution system etc. ( for One year)
e) For regional schemes more than 3 villages, trial period shall be Job 264105.00
one year with raw water pumping , pumps , raw water pumping
main, leading main,ESR, BPT and distribution system etc. ( Without
WTP) ( for One year )
f) Add for every additional village Month 5996.00
g) Add for every pumping station. Month 9867.00
Section - I- ( I )- C.I./D.I.Pipes
Sr Item Description Unit Rate ( in Rs.) 2012-
No 2013
With ED Without ED
Providing and supplying ISI mark C.I. S&S pipes (push on joints
1 pressure pipes of C.I.of following class and diameters confirming to
the I.S. specification inclusive cost of jointing materials (Rubber
gasket of EPDM Quality) including all statutory duties and taxes levied
by GoI and GoM in all respect, Education cess,VAT, Third party
inspection charges of TPI Agency approved by MJP including Transit
insurance, Railway freight unloading from railway wagon, loading into
trucks, transportation to departmental stores / site of work, unloading
stacking etc. completed as directed by Engineer- in-
charge(IS:1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or
latest edition/ revision with amendments for Rubber Gasskets.
With ED Without ED
Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of Without With
2 various classes with CI / MS specials of following diameter in proper
position, grade and alignment as directed by Engineer-in-charge
Rubber Ring Rubber
including conveyance of material from stores to site of work, including Ring
cost of jointing materials and rubber rings labour, giving hydraulic
testing etc. complete.
Note : Only S.B.R. Rubber gasket to be used as per IS 5382 and IS
12820
a C.I. "LA"CLASS / D.I.-K-9/K-7 Mortar Lined
1 80 mm RMT 44 50
2 100 mm RMT 53 59
3 125 mm RMT 66 73
4 150 mm RMT 70 79
5 200 mm RMT 94 104
6 250 mm RMT 123 135
7 300 mm RMT 133 152
8 350 mm RMT 166 186
9 400 mm RMT 199 230
10 450 mm RMT 199 243
11 500 mm RMT 230 280
Sr Item Description Unit Rate ( in Rs.) 2012-
No 2013
With ED Without ED
b C.I. "A"CLASS
1 80 mm RMT 46 56
2 100 mm RMT 56 66
3 125 mm RMT 71 79
4 150 mm RMT 78 86
5 200 mm RMT 102 110
6 250 mm RMT 133 146
7 300 mm RMT 145 163
8 350 mm RMT 179 200
9 400 mm RMT 201 231
10 450 mm RMT 211 245
11 500 mm RMT 249 298
12 600 mm RMT 329 398
13 700 mm RMT 423 556
14 750 mm RMT 475 610
15 800 mm RMT 561 698
16 900 mm RMT 676 882
17 1000 mm RMT 789 1058
c C.I. "B"CLASS
1 80 mm RMT 50 59
2 100 mm RMT 60 71
3 125 mm RMT 77 86
4 150 mm RMT 87 96
5 200 mm RMT 110 124
6 250 mm RMT 144 164
7 300 mm RMT 157 175
8 350 mm RMT 193 225
9 400 mm RMT 225 255
10 450 mm RMT 228 262
11 500 mm RMT 268 316
12 600 mm RMT 355 423
13 700 mm RMT 457 588
14 750 mm RMT 516 650
15 800 mm RMT 602 737
16 900 mm RMT 714 918
17 1000 mm RMT 814 1082
NOTE : Only 85% rate shall be payble till satiafactory hydraulic testing is given.
Sr Item Description Unit Rate ( in Rs.) 2012-
No 2013
With ED Without ED
Providing and supplying ISI mark D.I. S&S pipes (push on joints With ED Without
3 pressure pipes of D.I.of following class and diameters confirming to
the I.S. specification inclusive cost of jointing materials (Rubber
ED
gasket of EPDM Quality) including all statutory duties and taxes levied
by GoI and GoM in all respect, Education cess,VAT, Third party
inspection charges of TPI Agency approved by MJP including Transit
insurance, Railway freight unloading from railway wagon, loading into
trucks, transportation to departmental stores / site of work, unloading
stacking etc. completed as directed by Engineer- in-
charge(IS:8329/2000 for pipes and IS 158/1969 and IS 12820/1989 or
latest edition/ revision with amendments for Rubber Gasskets.
a D.I. K - 9
1 100 mm RMT 1145 1041
2 150 mm RMT 1670 1518
3 200 mm RMT 2076 1888
4 250 mm RMT 2768 2516
5 300 mm RMT 3519 3200
6 350 mm RMT 4405 4010
7 400 mm RMT 5208 4730
8 450 mm RMT 6288 5716
9 500 mm RMT 7308 6644
10 600 mm RMT 9664 8773
11 700 mm RMT 12403 11276
12 750 mm RMT 14102 12819
13 800 mm RMT 15339 13949
14 900 mm RMT 18933 17212
15 1000 mm RMT 22098 20089
b D.I. K-7
1 100 mm RMT 977 888
2 150 mm RMT 1434 1304
3 200 mm RMT 1692 1538
4 250 mm RMT 2242 2038
5 300 mm RMT 2826 2569
6 350 mm RMT 3480 3164
7 400 mm RMT 4143 3766
8 450 mm RMT 5000 4545
9 500 mm RMT 5859 5326
10 600 mm RMT 7717 7015
11 700 mm RMT 10409 9463
12 750 mm RMT 12097 10997
13 800 mm RMT 13989 12717
14 900 mm RMT 16779 15264
15 1000 mm RMT 19646 17860
Sr Item Description Unit Rate ( in Rs.) 2012-
No 2013
With ED Without ED
NOTE : 1) D.I. K-7 pipes shall not be used for Distribution System for dia. Less than & including 250mm.
NOTE : 2)For lowering laying & jointing D.I. K-9 / K-7 pipes rates shall be adopted as per C.I."LA" Class pipe.
Providing and making lead caulked joint with molten lead to Cast Iron
4 pipes and / or specials of all classes and fitting of following dia
including cost of lead and all jointing material, labour, hydraulic testing
etc. complete.
1 80 mm Joint 657
2 100 mm Joint 812
3 125 mm Joint 968
4 150 mm Joint 1200
5 200 mm Joint 1750
6 250 mm Joint 2126
7 300 mm Joint 2564
8 350 mm Joint 2906
9 400 mm Joint 3389
10 450 mm Joint 4707
11 500 mm Joint 5060
12 600 mm Joint 6501
13 700 mm Joint 7637
14 750 mm Joint 8675
15 800 mm Joint 9316
16 900 mm Joint 9936
17 1000 mm Joint 10594
NOTE : Only 85% payment shall be payble till satiafactory hydraulic testing is given.
1 80 mm RMT 1419
2 100 mm RMT 1753
3 125 mm RMT 2284
4 150 mm RMT 2849
5 200 mm RMT 4371
6 250 mm RMT 5890
7 300 mm RMT 7573
8 350 mm RMT 9885
9 400 mm RMT 12053
10 450 mm RMT 14473
11 500 mm RMT 16986
12 600 mm RMT 24162
13 700 mm RMT 32371
14 750 mm RMT 35221
Sr Item Description Unit Rate ( in Rs.) 2012-
No 2013
With ED Without ED
a D/F Specials
1 D/F Specials Upto and including 300 mm dia. KG 73.60
2 D/F Specials Above 350 mm dia upto 600 mm KG 78.20
3 Above 600 mm Dia KG 83.90
b S/S Specials / Socketted Br.Flagd. Specials
1 S/S Specials/ socketed Branch Flanged Specials Upto and including KG
300 mm dia. 71.30
2 S/S Specials/ socketed Branch Flanged Specials from 350 mm To KG
600 mm dia. 75.90
3 Above 600 mm dia. Kg 80.50
c Plain ended / P.E. Br.Flagd. Specials
1 Upto and including 300 mm dia. KG 69.00
2 from 350 mm To 600 mm dia. KG 75.90
3 Above 600 mm dia. Kg 80.50
Providing and supplying ISI standard MS specials of required
7 thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba
or Mahindra & Mahindra make) from inside and outside including all
taxes (Central and local), octroi, inspection charges, transportation to
stores / site, and stacking, etc. complete.
1 Machine ends suitable for PSC pipes of all diameters as per KG 76.50
detailed drawing with 10 mm thick x 0.7 M long barrel welded to it.
2 Only flanges with machining and drilling holes, etc. complete more KG 74.30
than 40 mm thick
3 Double flanged specials of all diameters KG 72.10
4 All socketted specials or socketted branch flanged specials of all KG 72.10
diameters
5 Plain ended specials or plain ended branch flanged specials of all KG 72.10
diameters
6 MS barrels (pipe pieces) locally manufactured (for small KG 70.00
quantities)
Providing and making flanged joints to flanged C.I./M.S. pipes of all
8 classes/specials etc. including cost of all jointing materials (rubber
packing, nut bolts, etc.), labour, hydraulic testing etc. complete.
1 80 mm Joint 174
2 100 mm Joint 301
3 125 mm Joint 314
4 150 mm Joint 603
5 200 mm Joint 626
6 250 mm Joint 897
7 300 mm Joint 931
8 350 mm Joint 1213
9 400 mm Joint 1511
10 450 mm Joint 1848
Sr Item Description Unit Rate ( in Rs.) 2012-
No 2013
With ED Without ED
1 80 mm Joint 193
2 100 mm Joint 326
3 125 mm Joint 344
4 150 mm Joint 640
5 200 mm Joint 680
6 250 mm Joint 970
7 300 mm Joint 1025
8 350 mm Joint 1331
9 400 mm Joint 1655
10 450 mm Joint 2022
11 500 mm Joint 2115
12 600 mm Joint 2323
13 700 mm Joint 3445
14 750 mm Joint 3576
15 800 mm Joint 4843
16 900 mm Joint 5098
17 1000 mm Joint 5373
NOTE : Only 85% payment shall be payble till satiafactory hydraulic testing is given.
Providing and supplying ISI standard D.I. specials & fittings with
10 sealing rubber gasket of S.B.R.,complete with Cast iron follower gland
and M.S. nut & bolts coated or otherwise protected from rusting and
suitable for D.I. pipes including cost of all labours and materials and
transportation to stores / site, loading , unloading including all taxes ,
etc. complete.As per IS 9523
With ED Without ED
NOTE : 1) Only 85% payment for lowering laying jointing shall be payble till satiafactory hydraulic testing is given.
NOTE : 2) Without any extra cost every pipe in the factory shall be hydraulically tested for 1 higher class I.e. when class 15 is
ordered every pipe shall be tested for 20 Kg./Sqcm at factory but pipe shall be branded & paid as class 15. This foot note
shall appear in tender condition.
NOTE : 3) Whenever manufacturer & contractor for lowering laying jointing is separate the principle contractor shall enter into
an aggrement with A.C.pipe manufacturer for satisfactory manufacturing ,transporting ,lowering ,laying jointing & testing of
pipe.This foot Note shall appear in tender conditions
Section - I - ( iii ) - P.V.C.Pipes
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
Note ; 1) 10% of cost of pipe shall be considered for cost of P.V.C. specials for estimate purpose only.
Note ; 2) One coupler & required cement solvent shall be provided with each full length pipe, cost of
which is included in rates below.
With ED Without
ED
Note ; One Rubber Ring shall be provided with each full length pipe, cost of which is included in rates
below.
a . Working Pressure 4 Kg./Sq.cm
1 63 mm RMT 48 43
2 75 mm RMT 69 60
3 90 mm RMT 96 85
4 110 mm RMT 131 117
5 125 mm RMT 181 161
6 140 mm RMT 219 195
7 160 mm RMT 291 257
8 180 mm RMT 395 350
9 200 mm RMT 487 434
10 225 mm RMT 623 554
11 250 mm RMT 763 678
12 280 mm RMT 1011 899
13 315 mm RMT 1287 1142
11 280 mm RMT 63
12 315 mm RMT 70
13 355 mm RMT 77
14 400 mm RMT 84
b . Working Pressure 6 to 12.50 Kg./Sq.cm
1 63 mm RMT 22
2 75 mm RMT 29
3 90 mm RMT 33
4 110 mm RMT 37
5 140 mm RMT 44
6 160 mm RMT 47
7 180 mm RMT 53
8 200 mm RMT 58
9 225 mm RMT 63
10 250 mm RMT 69
11 280 mm RMT 78
12 315 mm RMT 87
13 355 mm RMT 96
14 400 mm RMT 106
NOTE : 1) Only 85% payment for lowering laying jointing shall be payble till satiafactory hydraulic testing is given.
NOTE : 2) Third party inspecting agency shall invarably carry out Specific gravity Test , Ash Content test and confirm in writing
that those are within prescribed limits. This condition shall appear in tender conditions.
NOTE : 3) After receipt of pipes at site concerned Deputy Engineer shall confirm that weight of pipe for every class and dia is
not less than the prescribed standard weight as per IS 4985/1998 ( Which is given in CSR ) underweight pipes shall be
rejected .This condition shall appear in tender conditions.
Section -I ( IV ) - G.I.Pipes
Sr No Item Description Unit Rate ( in Rs.) 2012-
2013
1 Providing ISI mark G.I. pipe of following class and dia. Including all
local and central taxes, octroi, inspection charges, transportation to
stores, etc. complete .as per IS 1239/2004
Note ; 2) One coupler shall be provided with each full length pipe, cost of which is included
in rates below.
With ED Without
ED
a LIGHT
1 15 mm RMT 71 65
2 20 mm RMT 106 95
3 25 mm RMT 146 131
4 32 mm RMT 183 166
5 40 mm RMT 229 208
6 50 mm RMT 288 255
7 65 mm RMT 397 349
8 80 mm RMT 477 420
9 100 mm RMT 680 596
b MEDIUM
1 15 mm RMT 85 77
2 20 mm RMT 108 98
3 25 mm RMT 165 150
4 32 mm RMT 209 189
5 40 mm RMT 240 218
6 50 mm RMT 342 301
7 65 mm RMT 424 384
8 80 mm RMT 556 503
9 100 mm RMT 820 719
10 125 mm RMT 1097 978
11 150 mm RMT 1311 1151
c HEAVY
1 15 mm RMT 96 87
2 20 mm RMT 125 113
3 25 mm RMT 196 177
4 32 mm RMT 246 223
5 40 mm RMT 285 259
6 50 mm RMT 395 359
7 65 mm RMT 508 461
8 80 mm RMT 649 589
9 100 mm RMT 936 849
10 125 mm RMT 1159 1052
11 150 mm RMT 1396 1266
Sr No Item Description Unit Rate ( in Rs.) 2012-
2013
a LIGHT
1 15 mm RMT 23.00
2 20 mm RMT 26.00
3 25 mm RMT 32.00
4 32 mm RMT 37.00
5 40 mm RMT 46.00
6 50 mm RMT 55.00
7 65 mm RMT 80.00
8 80 mm RMT 89.00
9 100 mm RMT 106.00
b MEDIUM
1 15 mm RMT 25.00
2 20 mm RMT 28.00
3 25 mm RMT 34.00
4 32 mm RMT 39.00
5 40 mm RMT 50.00
6 50 mm RMT 59.00
7 65 mm RMT 86.00
8 80 mm RMT 97.00
9 100 mm RMT 106.00
10 125 mm RMT 113.00
11 150 mm RMT 119.00
c HEAVY
1 15 mm RMT 27.00
2 20 mm RMT 30.00
3 25 mm RMT 36.00
4 32 mm RMT 43.00
5 40 mm RMT 54.00
6 50 mm RMT 67.00
7 65 mm RMT 94.00
8 80 mm RMT 113.00
9 100 mm RMT 106.00
10 125 mm RMT 118.00
11 150 mm RMT 128.00
Note : Only 85 % Payment shall be payable till satisfactory hydraulic testing is given
Section -I ( V ) - S.W.Pipes
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
1 Providing ISI standard Stoneware pipes including all taxes (Central
and local), inspection charges, railway freight, unloading from railway
wagons, loadng into trucks, transport to departmental stores,
unloading, stacking etc. complete.as per IS 651
Note : Only 85 % Rate shall be payable till satisfactory hydraulic testing is given
Section - I- ( Vi )- R.C.C.Pipes
Sr No Item Description Unit Rate ( in Rs.) 2012-2013
Note ; One Collar shall be supplied with each full length plain
ended R.C.C.pipe, cost including in rates below.One rubber
ring shall be supplied with each full length socketted pipe , cost
including in rates below.
a Class P-I
1 80 mm RMT 309 281 273 247
2 100 mm RMT 324 294 293 267
3 150 mm RMT 339 309 304 275
4 200 mm RMT 396 360 355 322
5 225 mm RMT 452 411 407 369
6 250 mm RMT 494 449 443 403
7 300 mm RMT 632 575 567 514
8 350 mm RMT 681 619 613 556
9 400 mm RMT 864 785 782 710
10 450 mm RMT 1064 966 962 873
11 500 mm RMT 1280 1163 1153 1046
12 600 mm RMT 1615 1466 1456 1322
13 700 mm RMT 2103 1910 1892 1719
14 800 mm RMT 2428 2205 2184 1983
15 900 mm RMT 3056 2775 2751 2498
16 1000 mm RMT 3580 3252 3225 2928
17 1100 mm RMT 4068 3694 3662 3326
18 1200 mm RMT 4887 4438 4402 3998
b Class P-II
1 80 mm RMT 329 299 293 265
2 100 mm RMT 351 319 316 286
3 150 mm RMT 420 381 379 344
4 200 mm RMT 566 513 513 465
5 225 mm RMT 670 608 604 547
6 250 mm RMT 725 659 658 598
7 300 mm RMT 956 869 914 829
8 350 mm RMT 1193 1084 1080 981
9 400 mm RMT 1332 1210 1213 1101
10 450 mm RMT 1616 1467 1450 1317
11 500 mm RMT 2256 2049 2056 1867
12 600 mm RMT 2797 2541 2521 2290
Sr No Item Description Unit Rate ( in Rs.) 2012-2013
Collar Rubber
Joint Ring
Joint
1 80 mm RMT 44 31
2 100 mm RMT 53 37
3 150 mm RMT 80 56
4 200 mm RMT 106 75
5 225 mm RMT 124 88
6 250 mm RMT 140 98
7 300 mm RMT 168 118
8 350 mm RMT 173 121
9 400 mm RMT 220 155
10 450 mm RMT 266 185
11 500 mm RMT 290 203
12 600 mm RMT 367 254
13 700 mm RMT 416 289
14 800 mm RMT 482 334
15 900 mm RMT 530 369
16 1000 mm RMT 580 404
17 1100 mm RMT 806 547
18 1200 mm RMT 856 582
19 1400 mm RMT 954 652
20 1600 mm RMT 1052 722
21 1800 mm RMT 1150 792
Note : Only 85 % rate shall be payable till satisfactory hydraulic testing is given
Section -I ( VII ) PSC - P.S.C.Pipes
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
Without With ED
ED
1 Providing ISI standard Pre - stressed Cement concrete pipes (Non steel
cylinder ) pipes of following class and diameter including cost of all meterial
and labour required, cost of all taxes(Central and local) , inspection charges,
transportaion to stores/ site, unloading and stacking etc. complete as per IS
784/2001 .
i) Factory test Pressure
a) Site test pressure +0.1 N/mm2 , For working Pressure upto 1 N/mm2
b) Site test pressure +0.2 N/mm2 , For working Pressure above 1 N/mm2
ii) Site test Pressure - 1.5 times working pressure pertaining to the section
for 1.1 times static pressure , whichever is more ( Such a pressure is to be
controlled within 25 % of pump head in case of pumping main)
Without With ED
ED
6 700 mm RMT 5656 5131
7 800 mm RMT 6984 6336
8 900 mm RMT 8685 7879
9 1000 mm RMT 10124 9186
10 1100 mm RMT 11562 10490
11 1200 mm RMT 13358 12120
12 1300 mm RMT 15451 14017
13 1400 mm RMT 16998 15420
14 1500 mm RMT 19455 17651
15 1600 mm RMT 21578 19577
16 1700 mm RMT 23703 21504
17 1800 mm RMT 25825 23430
c Test Pressure 6 kg/Sq.cm
1 350 mm RMT 3404 3089
2 400 mm RMT 3678 3338
3 450 mm RMT 3847 3490
4 500 mm RMT 4255 3861
5 600 mm RMT 5148 4670
6 700 mm RMT 5851 5310
7 800 mm RMT 7242 6570
8 900 mm RMT 9027 8189
9 1000 mm RMT 10529 9552
10 1100 mm RMT 11988 10877
11 1200 mm RMT 13888 12599
12 1300 mm RMT 16044 14555
13 1400 mm RMT 17652 16014
14 1500 mm RMT 20220 18344
15 1600 mm RMT 22456 20373
16 1700 mm RMT 24693 22402
17 1800 mm RMT 26929 24432
d Test Pressure 8 kg/Sq.cm
1 350 mm RMT 3411 3094
2 400 mm RMT 3705 3362
3 450 mm RMT 3871 3513
4 500 mm RMT 4315 3915
5 600 mm RMT 5321 4827
6 700 mm RMT 6146 5577
7 800 mm RMT 7548 6848
8 900 mm RMT 9409 8537
9 1000 mm RMT 11004 9983
10 1100 mm RMT 12590 11423
11 1200 mm RMT 14576 13226
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
Without With ED
ED
12 1300 mm RMT 16861 15299
13 1400 mm RMT 18637 16909
14 1500 mm RMT 21355 19376
15 1600 mm RMT 24097 21861
16 1700 mm RMT 26838 24348
17 1800 mm RMT 29579 26836
e Test Pressure 10 kg/Sq.cm
1 350 mm RMT 3428 3110
2 400 mm RMT 3757 3407
3 450 mm RMT 4007 3635
4 500 mm RMT 4489 4071
5 600 mm RMT 5550 5035
6 700 mm RMT 6396 5802
7 800 mm RMT 7933 7197
8 900 mm RMT 9886 8969
9 1000 mm RMT 11577 10505
10 1100 mm RMT 13285 12053
11 1200 mm RMT 15392 13964
12 1300 mm RMT 17821 16168
13 1400 mm RMT 20144 18275
14 1500 mm RMT 23092 20951
15 1600 mm RMT 25733 23347
16 1700 mm RMT 28372 25742
17 1800 mm RMT 31012 28138
f Test Pressure 12 kg/Sq.cm
1 350 mm RMT 3512 3185
2 400 mm RMT 3855 3498
3 450 mm RMT 4134 3750
4 500 mm RMT 4642 4211
5 600 mm RMT 5771 5235
6 700 mm RMT 6683 6064
7 800 mm RMT 8309 7539
8 900 mm RMT 10333 9375
9 1000 mm RMT 12105 10984
10 1100 mm RMT 13879 12592
11 1200 mm RMT 16357 14842
12 1300 mm RMT 18944 17089
13 1400 mm RMT 20960 19017
14 1500 mm RMT 24004 21777
15 1600 mm RMT 26746 24266
16 1700 mm RMT 29490 26754
17 1800 mm RMT 32232 29243
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
Without With ED
ED
g Test Pressure 14 kg/Sq.cm
1 350 mm RMT 3598 3263
2 400 mm RMT 3957 3591
3 450 mm RMT 4262 3866
4 500 mm RMT 4792 4348
5 600 mm RMT 5993 5437
6 700 mm RMT 6972 6326
7 800 mm RMT 8688 7882
8 900 mm RMT 10827 9823
9 1000 mm RMT 12915 11717
10 1100 mm RMT 14840 13464
11 1200 mm RMT 17205 15610
12 1300 mm RMT 19860 18018
13 1400 mm RMT 22633 20534
14 1500 mm RMT 25936 23531
15 1600 mm RMT 29004 26315
16 1700 mm RMT 32072 29099
17 1800 mm RMT 35141 31883
h Test Pressure 16 kg/Sq.cm
1 350 mm RMT 3675 3335
2 400 mm RMT 4064 3687
3 450 mm RMT 4391 3985
4 500 mm RMT 4950 4492
5 600 mm RMT 6213 5637
6 700 mm RMT 7266 6592
7 800 mm RMT 9063 8222
8 900 mm RMT 12030 10915
9 1000 mm RMT 13539 12283
10 1100 mm RMT 16249 14740
11 1200 mm RMT 18754 17015
12 1300 mm RMT 21585 19584
13 1400 mm RMT 23826 21617
14 1500 mm RMT 28302 25677
15 1600 mm RMT 31744 28800
16 1700 mm RMT 35186 31923
17 1800 mm RMT 38627 35044
Without With ED
ED
5 600 mm RMT 6434 5837
6 700 mm RMT 7946 7210
7 800 mm RMT 9916 8996
8 900 mm RMT 12542 11378
9 1000 mm RMT 14738 13371
10 1100 mm RMT 17008 15430
11 1200 mm RMT 19658 17835
12 1300 mm RMT 22642 20542
13 1400 mm RMT 29877 27107
14 1500 mm RMT 33689 30564
15 1600 mm RMT 37971 34450
16 1700 mm RMT 42252 38334
17 1800 mm RMT 46533 42218
J Test Pressure 20 kg/Sq.cm
1 350 mm RMT 3849 3491
2 400 mm RMT 4277 3881
3 450 mm RMT 4649 4219
4 500 mm RMT 5265 4776
5 600 mm RMT 6661 6044
6 700 mm RMT 8803 7986
7 800 mm RMT 11711 10624
8 900 mm RMT 13843 12559
9 1000 mm RMT 16654 15109
10 1100 mm RMT 19796 17961
11 1200 mm RMT 24895 22588
12 1300 mm RMT 27394 24853
13 1400 mm RMT 32000 29033
14 1500 mm RMT 36169 32915
15 1600 mm RMT 40452 36812
16 1700 mm RMT 44734 40708
17 1800 mm RMT 49015 44605
Without With ED
ED
5 600 mm RMT 270
6 700 mm RMT 297
7 800 mm RMT 334
8 900 mm RMT 345
9 1000 mm RMT 445
10 1100 mm RMT 585
11 1200 mm RMT 626
12 1300 mm RMT 743
13 1400 mm RMT 784
14 1500 mm RMT 989
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
Without With ED
ED
15 1600 mm RMT 1112
16 1700 mm RMT 1239
17 1800 mm RMT 1310
Note : 1)Only 85 % Payment shall be payable till satisfactory hydraulic testing is given
NOTE : 2)Whenever manufacturer is separate& contractor for lowering laying jointing & testing is seperate the principal
contractor shall enter into an aggrement with P S C pipe manufacturer for satisfactory manufacturing transporting lowering laying
jointing & testing of pipe.This foot Note shall appear in tender conditions
Section -I ( VIII ) B.W.S.C. (Bar Wrapped steel Cylinder) Pipes
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
Without With ED
ED
1 Providing and supplying European Standard EN 639/1994 and EN
641/1994 or AWWA C-303 standard reinforced concrete pressure
pipes cylinder type or IS 15155: 2002(Bar wrapped steel cylinder
pipes suitable for overlaping steel welded joint or butt welded steel
joints) of following class and diameter including cost of all material and
labour required, cost of all taxes (Central and State Govt.), inspection
charges, transportation to stores/ site, transit insurance, loading and
unloding and stacking etc. complete.
Note ; 1) For lowering , laying and pouring of cement mortar in the field on joints ( after laying and
welding ), rates as per P.S.C. pipes lowering, laying and jointing shall be adopted.
Note ; 2) For field welding rates applicable for similar welding in M.S. pipes given in that section
shall be adopted.
NOTE : 3) Whenever manufacturer is separate& contractor for lowering laying jointing & testing
is seperate the principal contractor shall enter into an aggrement with B.W. S C pipe manufacturer
for satisfactory manufacturing transporting lowering laying jointing & testing of pipe.This foot Note
shall appear in tender conditions
NOTE : 4) No negative tolerance shall be accepted for the M.S.shell thickness of B.W.S.C. pipes
over the thickness mentioned in EN 641 or AWW AC 303
Section - I- ( IX ) - G.R.P./F.R.P. Pipes
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With ED Without ED.
d 12 Kg/Sq. cm
1 300mm RMT 1556 1395
2 350mm RMT 1796 1610
3 400mm RMT 2000 1793
4 450mm RMT 2613 2342
5 500mm RMT 2264 2029
6 600mm RMT 3407 3054
7 700mm RMT 4225 3788
8 800mm RMT 5234 4693
9 900mm RMT 6418 5754
10 1000mm RMT 7650 6859
11 1100mm RMT 9377 8406
12 1200mm RMT 10936 9805
13 1300mm RMT 12378 11097
14 1400mm RMT 14246 12772
15 1500mm RMT 16289 14604
16 1600mm RMT 18892 16938
17 1700mm RMT 22414 20334
18 1800mm RMT 24573 22293
19 1900mm RMT 27200 24676
20 2000mm RMT 29580 26835
21 2100mm RMT 32976 29916
22 2200mm RMT 35587 32284
e 15 Kg/Sq. cm
1 300mm RMT 1620 1452
2 350mm RMT 1871 1677
3 400mm RMT 2080 1865
4 450mm RMT 2398 2150
5 500mm RMT 2756 2471
6 600mm RMT 3642 3265
7 700mm RMT 4543 4073
8 800mm RMT 5669 5082
9 900mm RMT 6987 6264
10 1000mm RMT 8292 7434
11 1100mm RMT 10173 9121
12 1200mm RMT 11804 10583
13 1300mm RMT 13549 12147
14 1400mm RMT 15595 13982
15 1500mm RMT 17692 15862
16 1600mm RMT 20527 18404
17 1700mm RMT 24695 22403
18 1800mm RMT 26988 24483
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With ED Without ED.
Note :3) Only 85 % Payment shall be payable till satisfactory hydraulic testing is given
Section - I - ( X ) - H.D.P.E.Pipes
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
A P.E. 100
a 6 Kg/Sq. Cm
1 63 mm RMT 91 84
2 75 mm RMT 132 119
3 90 mm RMT 184 167
4 110 mm RMT 267 242
5 125mm RMT 364 330
6 140 mm RMT 457 415
7 160 mm RMT 592 538
8 180 mm RMT 746 678
9 200 mm RMT 876 794
10 225mm RMT 1129 1024
11 250 mm RMT 1385 1257
12 280 mm RMT 1737 1576
13 315 mm RMT 2201 1997
14 355mm RMT 2790 2531
15 400mm RMT 3654 3315
16 450mm RMT 4814 4368
17 500mm RMT 5953 5400
18 560mm RMT 7451 6760
19 630mm RMT 9385 8509
20 710mm RMT 11891 10986
21 800mm RMT 14336 13244
22 900mm RMT 18161 16778
23 1000mm RMT 22394 20690
b 8 Kg/Sq. Cm
1 63 mm RMT 116 105
2 75 mm RMT 172 156
3 90 mm RMT 231 209
4 110 mm RMT 340 308
5 125mm RMT 461 418
6 140 mm RMT 576 524
7 160 mm RMT 750 680
8 180 mm RMT 945 857
9 200 mm RMT 1113 1010
10 225mm RMT 1430 1297
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
PN 16 (SDR 9)
i) 20 mm Rmt 28 26
ii) 25 mm Rmt 40 36
iii) 32 mm Rmt 66 59
iv) 40 mm Rmt 97 87
v) 50 mm Rmt 148 132
vi) 63 mm Rmt 218 194
vii) 75 mm Rmt 295 262
viii) 90 mm Rmt 426 379
ix) 110 mm Rmt 633 563
x) 125 mm Rmt 817 727
xi) 140 mm Rmt 1027 914
xii) 160 mm Rmt 1361 1211
vii) 180 mm Rmt 1722 1533
viii) 200 mm Rmt 2129 1895
ix) 225 mm Rmt 2697 2400
x) 250 mm Rmt 3316 2952
xi) 280 mm Rmt 4169 3711
xii) 315 mm Rmt 5362 4772
C) PN 10 (SDR 13.6)
i) 63 mm Rmt 150 134
ii) 75 mm Rmt 212 189
iii) 90 mm Rmt 305 272
iv) 110 mm Rmt 450 401
v) 125 mm Rmt 579 516
vi) 140 mm Rmt 727 647
vii) 160 mm Rmt 951 846
viii) 180 mm Rmt 1205 1072
ix) 200 mm Rmt 1483 1320
x) 225 mm Rmt 1881 1673
xi) 250 mm Rmt 2315 2060
xii) 280 mm Rmt 2900 2581
xiii) 315 mm Rmt 3662 3259
D) PN 8 (SDR 17)
i) 63 mm Rmt 122 108
ii) 75 mm Rmt 171 152
iii) 90 mm Rmt 247 220
iv) 110 mm Rmt 367 327
v) 125 mm Rmt 470 418
vi) 140 mm Rmt 589 524
vii) 160 mm Rmt 771 686
viii) 180 mm Rmt 977 870
ix) 200 mm Rmt 1203 1071
x) 225 mm Rmt 1528 1360
xi) 250 mm Rmt 1875 1705
xii) 280 mm Rmt 2399 2135
xii) 315 mm Rmt 3040 2705
E) PN 6 (SDR 21)
i) 63 mm Rmt 94 84
ii) 75 mm Rmt 136 121
iii) 90 mm Rmt 190 169
iv) 110 mm Rmt 284 258
v) 125 mm Rmt 374 326
vi) 140 mm Rmt 460 410
vii) 160 mm Rmt 602 536
viii) 180 mm Rmt 756 672
ix) 200 mm Rmt 939 836
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With E.D. Without
ED
x) 225 mm Rmt 1189 1058
xi) 250 mm Rmt 1452 1293
xii) 280 mm Rmt 1836 1634
xiii) 315 mm Rmt 2309 2055
a TP 4Kg/Sq
4Kg/Sq.Cm.
Cm
1 350 mm RMT 4464 4054
2 400 mm RMT 4909 4457
3 450mm RMT 5390 4896
4 500 mm RMT 5965 5417
5 600 mm RMT 7213 6551
6 700 mm RMT 8334 7569
7 800 mm RMT 9382 8522
8 900 mm RMT 11499 10445
9 1000 mm RMT 13280 12062
10 1100mm RMT 14870 13505
11 1200mm RMT 16349 14849
12 1300 mm RMT 18890 17156
13 1400mm RMT 20511 18628
14 1500 mm RMT 21993 19975
15 1600 mm RMT 23476 21321
16 1700mm RMT 24958 22668
17 1800mm RMT 26440 24014
b TP 5.5 Kg/Sq.Cm.
1 350 mm RMT 4464 4054
2 400 mm RMT 4930 4479
3 450mm RMT 5417 4923
4 500 mm RMT 6000 5449
5 600 mm RMT 7262 6596
6 700 mm RMT 8400 7629
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With E.D.
ED With t ED
Without
c TP 7 Kg/Sq.Cm.
1 350 mm RMT 4475 4063
2 400 mm RMT 4951 4496
3 450mm RMT 5445 4945
4 500 mm RMT 6032 5478
5 600 mm RMT 7312 6641
6 700 mm RMT 8479 7701
7 800 mm RMT 9629 8745
8 900 mm RMT 11756 10677
9 1000 mm RMT 13613 12366
10 1100mm RMT 15289 13886
11 1200mm RMT 17455 15853
12 1300 mm RMT 19518 17728
13 1400mm RMT 21450 19483
14 1500 mm RMT 22384 20329
15 1600 mm RMT 23867 21676
16 1700mm RMT 25349 23023
17 1800mm RMT 26831 24369
d TP 8.5 Kg/Sq.Cm.
1 350 mm RMT 4492 4080
2 400 mm RMT 4976 4520
3 450mm RMT 5473 4970
4 500 mm RMT 6067 5510
5 600 mm RMT 7376 6700
6 700 mm RMT 8578 7790
7 800 mm RMT 9765 8869
8 900 mm RMT 11923 10828
9 1000 mm RMT 13819 12550
10 1100mm RMT 15537 14112
11 1200mm RMT 17903 16261
12 1300 mm RMT 20032 18194
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With E.D.
ED With t ED
Without
e TP 10 Kg/Sq.Cm.
1 350 mm RMT 4508 4095
2 400 mm RMT 4995 4539
3 450mm RMT 5506 5002
4 500 mm RMT 6117 5555
5 600 mm RMT 7449 6764
6 700 mm RMT 8677 7880
7 800 mm RMT 9913 9003
8 900 mm RMT 12087 10978
9 1000 mm RMT 14024 12736
10 1100mm RMT 15926 14465
11 1200mm RMT 18207 16536
12 1300 mm RMT 20390 18520
13 1400mm RMT 22276 20233
14 1500 mm RMT 23209 21079
15 1600 mm RMT 24692 22427
16 1700mm RMT 26175 23773
17 1800mm RMT 27657 25120
f TP11.5 Kg/Sq.Cm.
1 350 mm RMT 4527 4111
2 400 mm RMT 5027 4567
3 450mm RMT 5550 5039
4 500 mm RMT 6169 5602
5 600 mm RMT 7523 6833
6 700 mm RMT 8774 7968
7 800 mm RMT 10188 9254
8 900 mm RMT 12254 11131
9 1000 mm RMT 14228 12922
10 1100mm RMT 16181 14696
11 1200mm RMT 18513 16814
12 1300 mm RMT 20751 18848
13 1400mm RMT 22699 20617
14 1500 mm RMT 23631 21462
15 1600 mm RMT 25113 22809
16 1700mm RMT 26596 24155
17 1800mm RMT 28078 25502
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With E.D.
ED With t ED
Without
g TP 13 Kg/Sq.Cm.
1 350 mm RMT 4562 4143
2 400 mm RMT 5069 4604
3 450mm RMT 5594 5081
4 500 mm RMT 6220 5649
5 600 mm RMT 7595 6898
6 700 mm RMT 8874 8058
7 800 mm RMT 10356 9407
8 900 mm RMT 12421 11281
9 1000 mm RMT 14526 13193
10 1100mm RMT 16438 14930
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With E.D.
ED With t ED
Without
h TP 14.5 Kg/Sq.Cm.
1 350 mm RMT 4601 4179
2 400 mm RMT 5116 4646
3 450mm RMT 5649 5131
4 500 mm RMT 6279 5703
5 600 mm RMT 7672 6968
6 700 mm RMT 9456 8588
7 800 mm RMT 10525 9559
8 900 mm RMT 12706 11541
9 1000 mm RMT 14739 13386
10 1100mm RMT 16696 15163
11 1200mm RMT 19130 17374
12 1300 mm RMT 21479 19507
13 1400mm RMT 24161 21944
14 1500 mm RMT 25092 22789
15 1600 mm RMT 26575 24137
16 1700mm RMT 28057 25483
17 1800mm RMT 29539 26830
I TP17 Kg/Sq.Cm.
1 350 mm RMT 4636 4212
2 400 mm RMT 5162 4689
3 450mm RMT 5707 5183
4 500 mm RMT 6347 5765
5 600 mm RMT 7771 7057
6 700 mm RMT 9076 8244
7 800 mm RMT 10728 9745
8 900 mm RMT 12889 11705
9 1000 mm RMT 14955 13581
10 1100mm RMT 16964 15408
11 1200mm RMT 19440 17656
12 1300 mm RMT 21844 19840
13 1400mm RMT 24628 22367
14 1500 mm RMT 25558 23214
15 1600 mm RMT 27041 24560
16 1700mm RMT 28524 25907
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With E.D.
ED With t ED
Without
j TP 18.5 Kg/Sq.Cm.
1 350 mm RMT 4674 4245
2 400 mm RMT 5209 4731
3 450mm RMT 5765 5236
4 500 mm RMT 6417 5828
5 600 mm RMT 7870 7148
6 700 mm RMT 9189 8347
7 800 mm RMT 11082 10064
8 900 mm RMT 13113 11910
9 1000 mm RMT 15211 13814
10 1100mm RMT 17231 15649
11 1200mm RMT 19752 17940
12 1300 mm RMT 22892 20793
13 1400mm RMT 25266 22948
14 1500 mm RMT 25671 23314
15 1600 mm RMT 27153 24662
16 1700mm RMT 28635 26009
17 1800mm RMT 30119 27355
k TP 20 Kg/Sq.Cm.
1 350 mm RMT 4711 4278
2 400 mm RMT 5257 4775
3 450mm RMT 5822 5288
4 500 mm RMT 6489 5894
5 600 mm RMT 7968 7237
6 700 mm RMT 9416 8552
7 800 mm RMT 11349 10306
8 900 mm RMT 13415 12182
9 1000 mm RMT 15564 14135
10 1100mm RMT 17638 16019
11 1200mm RMT 20785 18878
12 1300 mm RMT 23387 21241
13 1400mm RMT 25824 23453
14 1500 mm RMT 26227 23821
15 1600 mm RMT 27710 25168
16 1700mm RMT 29192 26514
17 1800mm RMT 30674 27861
l TP 21.5 Kg/Sq.Cm.
1 350 mm RMT 4750 4316
2 400 mm RMT 5302 4817
3 450mm RMT 5880 5340
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With E.D.
ED With t ED
Without
m TP 23 Kg/Sq.Cm.
1 350 mm RMT 4787 4349
2 400 mm RMT 5350 4859
3 450mm RMT 5939 5394
4 500 mm RMT 6628 6020
5 600 mm RMT 8254 7497
6 700 mm RMT 10190 9256
7 800 mm RMT 11880 10790
8 900 mm RMT 14008 12723
9 1000 mm RMT 16270 14778
10 1100mm RMT 19017 17272
11 1200mm RMT 21825 19823
12 1300 mm RMT 24612 22353
13 1400mm RMT 27747 25200
14 1500 mm RMT 28150 25567
15 1600 mm RMT 29632 26915
16 1700mm RMT 31116 28261
17 1800mm RMT 32598 29607
n TP 24.5 Kg/Sq.Cm.
1 350 mm RMT 4825 4382
2 400 mm RMT 5398 4902
3 450mm RMT 5997 5447
4 500 mm RMT 6699 6084
5 600 mm RMT 8586 7798
6 700 mm RMT 10331 9383
7 800 mm RMT 12097 10986
8 900 mm RMT 14244 12938
9 1000 mm RMT 17036 15472
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
With E.D.
ED With t ED
Without
Note ; 1) For P.C.C.P pipes lowering , laying and pouring of cement mortar in the field on joints
(after laying and welding ), rates as per P.S.C. pipes lowering, laying and jointing shall be
adopted
adopted.
Note ; 2) For field welding rates applicable for similar welding in M.S. pipes given in that
section shall be adopted.
NOTE : 3) Whenever manufacturer is separate& contractor for lowering laying jointing &
testing is seperate the principal contractor shall enter into an aggrement with P C C P pipe
manufacturer for satisfactory manufacturing transporting lowering laying jointing & testing of
pipe.This foot Note shall appear in tender conditions
Section - I - ( XII ) - Pipe Appurtenances
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
7 200 mm No 24284
8 250 mm No 38986
9 300 mm No 54474
10 350 mm No 93820
11 400 mm No 108424
12 450 mm No 127927
13 500 mm No 207834
14 600 mm No 305384
15 700 mm No 369010
16 750 mm No 423608
17 800 mm No 481972
18 900 mm No 609995
19 1000 mm No 753081
20 1100 mm No 911227
21 1200 mm No 1084436
d With by pass arrangement - PN-1.6
1 50 mm No 3312
2 65 mm No 3727
3 80 mm No 5484
4 100 mm No 7092
5 125 mm 9911
6 150 mm No 12030
7 200 mm No 24298
8 250 mm No 36715
9 300 mm No 51028
10 350 mm No 85713
11 400 mm No 112272
12 450 mm No 131355
13 500 mm No 213216
14 600 mm No 311049
15 700 mm No 375853
16 750 mm No 431463
17 800 mm No 490910
18 900 mm No 621308
19 1000 mm No 767046
20 1100 mm No 928125
21 1200 mm No 1104545
2 Providing and supplying double flange sluice valves confirming for IS
2906/14846 including warn gear arrangement as per test pressure
stainless steel spindle caps including all taxes transportation etc
complete.
A Without byepass
a Sluice valves - PN -1
1 50 mm No 4391
2 65 mm No 4985
3 80 mm No 5116
4 100 mm No 6812
5 125 mm No 8521
6 150 mm No 10217
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
7 200 mm No 19333
8 250 mm No 29913
9 300 mm No 37695
10 350 mm No 53477
11 400 mm No 72101
12 450 mm No 88187
13 500 mm No 113477
14 600 mm No 167606
15 700 mm No 300430
16 750 mm No 342603
17 800 mm No 427239
18 900 mm No 550860
19 1000 mm No 814189
20 1100 mm No 1078533
21 1200 mm No 1280269
With by pass arrangement - PN-1.
i) 50 mm No 4391
ii) 65 mm No 4985
iii) 80 mm No 5116
iv) 100 mm No 6812
v) 125 mm No 8521
vi) 150 mm No 12374
vii) 200 mm No 21854
viii) 250 mm No 33263
ix) 300 mm No 40982
x) 350 mm No 58087
xi) 400 mm No 77248
xii) 450 mm No 93275
xiii) 500 mm No 120104
xiv) 600 mm No 174198
xv) 700 mm No 310617
xvi) 750 mm No 351996
xvii) 800 mm No 437316
xviii) 900 mm No 561585
xix) 1000 mm No 826615
xx) 1100 mm No 1093680
xxi) 1200 mm No 1293675
10 350 mm No 72811
11 400 mm No 99720
12 450 mm No 123737
13 500 mm No 160146
14 600 mm No 243982
15 700 mm No 524772
16 750 mm No 579078
17 800 mm No 672599
18 900 mm No 813137
19 1000 mm No 1183325
20 1100 mm No 1285723
21 1200 mm No 1721030
4 150 mm No 10944
5 200 mm No 14586
6 250 mm No 18230
7 300 mm No 28844
8 350 mm No 58665
9 400 mm No 63023
10 450 mm No 72811
11 500 mm No 79947
12 600 mm No 98727
13 700 mm No 159784
14 750 mm No 198334
15 800 mm No 218214
16 900 mm No 301378
17 1000 mm No 358723
18 1100 mm No 581758
19 1200 mm No 550499
20 1400 mm No 839367
21 1500 mm No 1042954
i) 50 mm No 689
ii) 65 mm No 1036
iii) 80 mm No 1440
iv) 100 mm No 1881
v) 125 mm No 2342
vi) 150 mm No 2957
vii) 200 mm No 3076
viii) 250 mm No 4008
ix) 300 mm No 4158
x) 350 mm No 5124
xi) 400 mm No 6182
xii) 450 mm No 7354
xiii) 500 mm No 7616
xiv) 600 mm No 8083
xv) 700 mm No 8714
xvi) 750 mm No 9598
xvii) 800 mm No 11438
xviii) 900 mm No 12136
xix) 1000 mm No 14307
xx) 1100 mm No 16521
xxi) 1200 mm to 1500 mm No 18153
1 12/15 MM No 615
2 20 mm No 741
3 25 mm No 1022
4 32 mm No 1116
5 40 mm No 1228
6 50 mm No 1349
b Air Valve Single Ball Flanged / Screwed Type - PN -1.6
1 12/15 mm No 719
2 20 mm No 1022
3 25 mm No 1228
4 32 mm No 1324
5 40 mm No 1418
6 50 mm No 1851
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
9 Providing and supplying Kinetic Double Orifice type Air Valves as per No
MJPs standard specifications having small orifice elastic ball resting
on a gun metal orifice nipple, large orifice vulcanite ball seating on
moulded seat ring,with built-in Kinetic features, isolatintg sluice valve
mounted in horizontal position and operated by wheel gearing, inlet
face and drilled, including all taxes (Central and local), insurance,
third party inspection charges, loading, unloding, transportation upto
departmental stores / site, etc. complete.
16 Providing erecting Kinetic Double Orifice Cast Steel Air Valves with
an isolating Sluice Valve mounted in horizontal position operated by
wheel gear suitable for working pressure of Class 300 rating (52
kg/cm2)
A With Third Party Inspection
1 80 mm dia No 35996
2 100 mm dia No 41148
3 150 mm dia No 96157
4 200 mm dia No 116071
17 Providing and fixing in position air valve shaft including providing and
fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long
over branch flange of air valve tee, providing PCC block of M-150
concrete 150 mm thick around the air valve tee including encasing of
vertical shaft in PCC M-150 as shown in type design together with
providing and making flanged joints wherever required and fixing of
air valve over the shaft excluding cost of air valve and branch flanged
air valve tee. etc. complete as per type design and as directed by
Engineer-in-charge for following diameters of pipe lines (type design
attached.)
6 125 mm No 25849
7 150 mm No 29544
8 200 mm No 65238
9 250 mm No 91707
10 300 mm No 121226
19 Lowering, laying and fixing in proper alignment and position all types
of C.I. D/F angle type spring loaded pressure relief valves including
all cost of all material, labour, cost of conveyance from stores to site
of work and giving satisfactory hydraulic testing, etc. complete. (For
all class of valves.).
1 25 mm No 206
2 40 mm No 273
3 50 mm No 316
4 80 mm No 378
5 100 mm No 415
6 125 mm No 462
7 150 mm No 652
8 200 mm No 712
9 250 mm No 831
10 300 mm No 949
Note : Only 85% rate is payable till satisfactiry hydraulic testing is given.
20 Cutting and champhering of pipes of following diameters including
cost of all materials and labour involved, etc. complete as directed by
Engineer-in-charge (for all class of pipes).
C.I. Pipes.
1 80 mm No 33
2 100 mm No 39
3 150 mm No 59
4 200 mm No 76
5 250 mm No 109
6 300 mm No 129
7 350 mm No 131
8 400 mm No 167
9 450 mm No 194
10 500 mm No 232
11 600 mm No 283
12 700 mm No 333
13 750 mm No 398
14 800 mm No 435
15 900 mm No 479
16 1000 mm No 521
21 Cutting and champhering of pipes of following diameters including
cost of all materials and labour involved, etc. complete as directed by
Engineer-in-charge (for all class of pipes).
A.C. Pipes.
1 80 mm No 11
2 100 mm No 13
3 150 mm No 21
4 200 mm No 22
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
5 250 mm No 32
6 300 mm No 44
7 350 mm No 54
8 400 mm No 61
9 450 mm No 66
10 500 mm No 75
11 600 mm No 86
22 Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or
D. I. pipe of all class for tyton joints including all taxes (Central and
local) inspection charges, transportation to departmental stores / site,
etc. complete.
a S.B.R. Gaskets for C. I. / DI Pipes.
1 80 mm No 39
2 100 mm No 43
3 150 mm No 60
4 200 mm No 102
5 250 mm No 133
6 300 mm No 187
7 350 mm No 214
8 400 mm No 298
9 450 mm No 325
10 500 mm No 444
11 600 mm No 615
12 700 mm No 1095
13 750 mm No 1138
14 800 mm No 1179
15 900 mm No 1705
16 1000 mm No 2190
b Sealing O Rings of SBR (for CID joints)
1 80 mm Set 45
2 100 mm Set 53
3 125 mm Set 64
4 150 mm Set 75
c Flat Flanged Gaskets moulded out of SBR (For Flanged Joints).
1 80 mm No 82
2 100 mm No 109
3 125 mm No 129
4 150 mm No 177
5 200 mm No 219
6 250 mm No 307
7 300 mm No 326
8 350 mm No 393
9 400 mm No 487
10 450 mm No 532
11 500 mm No 623
12 600 mm No 838
Sr No Item Description Unit Rate ( in Rs.)
2012-2013
23 Providing and fixing and jointing high proformance C I Air valve for
water combination type ( Kinetic Air Valve alongwith automatic air
valve ) double ball , double orifice with stainless steel ball tampar
proof air vent rolling sill machanism for air release and anyivaccum
application design for 16 Kg/Sqcm working pressure and tested for
20 Kg /Sqcm pressure ( Rate include cost of gasket, belt, nut and any
other material required for jointing and its transportation etc and
including all taxes and duties and excluding octroi ).etc complete.
1 80 mm No 1302
2 100 mm No 1419
3 125 mm No 1786
4 150 mm No 2555
5 200 mm No 3310
6 250 mm No 4993
7 300 mm No 5589
8 350 mm No 7372
9 400 mm No 9623
10 450 mm No 11295
11 500 mm No 14193
12 600 mm No 18200
13 700 mm No 24823
14 750 mm No 30164
2 Manufacturing,Suppling & delivery of C.I mechanical compression
coller coupling (Popularly known as fifty T.M. coller coupling) ) suitable
for C.I. spun pipes (As per I.S. 1536/2001) & D.I. pipes (As per I.S.
8329/2000) complete with sealing rubber gasket of S.B.R,cast iron
follower glands & mild steel nut-bolts.The whole assembly should be
mechanically & hydraulically tested to the provision as laid down in
I.S. 1538/1993. The rates are inclusive of cost of material,forwarding
charges,saletax, loading, transportation & unloading at departmental
store. etc complete as directed.
1 80 mm No 784
2 100 mm No 841
3 125 mm No 1121
4 150 mm No 1512
5 200 mm No 1726
6 250 mm No 2767
7 300 mm No 3541
8 350 mm No 4364
9 400 mm No 6792
10 450 mm No 7626
11 500 mm No 10422
12 600 mm No 13000
13 700 mm No 16984
14 750 mm No 19928
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
1 80 mm No 2071
2 100 mm No 2306
3 125 mm No 2914
4 150 mm No 4002
5 200 mm No 5271
6 250 mm No 7733
7 300 mm No 9330
8 350 mm No 15564
9 400 mm No 19205
10 450 mm No 26788
11 500 mm No 29845
12 600 mm No 41324
13 700 mm No 58888
14 750 mm No 77879
5 Supply of C. I. Mechanical Joint Double Socket 22.5 (1/6) Bends as
dimensionally described in Table -16 of IS-13382/1992 complete with
sealing rubber gasket of SBR (dimensionally described in IS-
12820/1989) with cast iron follower gland and mild steel nut bolts
coated or otherwise protected from rusting and suitable for C. I.
pipes.
1 80 mm No 1988
2 100 mm No 2213
3 125 mm No 2657
4 150 mm No 3757
5 200 mm No 4711
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
6 250 mm No 7124
7 300 mm No 8599
8 350 mm No 13576
9 400 mm No 17404
10 450 mm No 22017
11 500 mm No 25658
12 600 mm No 33998
13 700 mm No 51142
14 750 mm No 56318
6 Supply of CI Mechanical joint Double Socket 11.25 (1/32) Bends as
dimensionally described in Table -17 of IS - 13382/1992 complete
with sealing rubber gasket of S.B.R. dimensionally described in (IS-
12820/1989) with cast iron follower gland and mild steel nut bolts
coated or otherwise protected from rusting and suitable for C. I.
pipes.
1 80 mm No 1969
2 100 mm No 2162
3 125 mm No 2348
4 150 mm No 3672
5 200 mm No 4522
6 250 mm No 6685
7 300 mm No 7407
8 350 mm No 11689
9 400 mm No 15834
10 450 mm No 19985
11 500 mm No 21784
12 600 mm No 29863
13 700 mm No 40258
14 750 mm No 44912
7 Supply of CI Mechanical joint All Socket Tees as dimenisonlly
described in Table -18 of IS - 13382/1992 complete with sealing
rubber gasket of S.B.R. dimensionally described in IS-12820/1989)
with cast iron follower gland and mild steel nut bolts coated or
otherwise protected from rusting and suitable for C. I. pipes.
2 Fabricating one piece cants, short pipes (shorter than one strake
length) from the steel plates supplied free of cost of and stacking the
same in fabricators yard. The rate to include cutting the plates, rolling,
tack welding either on automatic welding machine or manually and
forming V edge to both ends of pipes.
5 To 8 mm MT 12359.00
8 To12 mm MT 8121.00
12 To 25 mm MT 5827.00
v). Flat manhole covers. The rate to include cutting, tack welding. MT 10417.00
The rate also to include drilling holes including grinding wherever
necessary with supply of bolts, nuts, washers, etc.complete as per
drawing.
vi , a). Flange rings below 40 mm. thick. The rate to include gas : MT 16949.00
cutting, tack welding to form ring, drilling holes including grinding
wherever necessary etc. complete.
vi , b). Flange rings 40 mm.and above thick. The rate to include MT 22069.00
gas cutting to tack welding to form ring, drilling holes including
grinding wherever necessary etc. complete.
vii , a). Machining of flange ringe for cut upto 2 mm. including
handling, assembling, alignment the ring on machine, etc. complete
as directed by Engineer-in-charge -
I)for thickness of flange ring below 40 mm. Sq.m 971.00
ii) for thickness of flange ring 40 mm. and above. Sq.m 1483.00
vii b). Extra over and above (vii) (a) for machining beyond 2 mm. Sq.m 741.00
for every additional cut of 2 mm. or part thereof.
i). Stress relieving of flange rings as specified and directed. Sq.m 3531.00
ii). Plug plates 150 mm. dia. and the thickness of plate from 14 mm Each 67.00
to 25 mm as per drawing. The rate to include gas cutting, drilling
holes, cost of G. I. plugs, rolling to raquired curvature and therading,
etc. complete.
6 Providing, fabricating and fixing expansion joints for pipelines as per
the drawing. The rate to include machining the strakes and steel ring
as shown in the drawing and welding on either automatic welding
machine or manually, Rate includes plates and flats required for
expansion joint and all othr materials such as synthetic rubber, rubber
ring, etc. complete. including packing as per specifications, grease,
bolts and nuts, etc. including local handling, all types of taxes and
duties etc. complete.
10 Blast cleaning the surface of the old or new pipeline internally to Sq.m 77.00
remove all rust etc. complete, including providing sand, machinery,
labour, cutting of pipes at required places and rewelding the same etc,
complete as directed by Engineer-in-charge. (Pipes pieces if required
for rewelding of old pipeline shall be paid separately.)
11 Cleaning of old or new pipeline internally with mechanical cleaning Sq.m 77.00
machine having steel scraper blades with required passes including
removing all rust, scaling etc. including cutting of pipes at required
places, rewelding the same incuding cost of all materials and labour,
etc, complete (Pipes pieces if required for rewelding of old pipeline
shall be paid separately.)
Note : Water for this purpose shall be supplied by the department free
of cost at fixed point within 5 Kms. Lead and all arrangements for
filling section and creating hydraulic pressure on polyurethene pig
shall be done by contractor at his own cost.
13 Blast cleaning the surface of the old or new pipeline externally to Sq.m 91.00
remove all rust including providing sand machinery. etc. complete as
directed by Engineer-in-charge.
14 Providing and applying primer and one coat of red oxide of Sq.m 25.00
iron,paint, internally, to blast clened surface of the pipes.
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
15 Providing and applying primer and one coat of red oxide of Sq.m 43.00
iron, paint, internally, including cleaning the surface of the pipes with
steel scrappers, wire brushes, and metal cleaning solution, etc.
17 Providing and applying primer & one coat of red oxide of iron paint
externally to blast cleaned surface of the pipe etc complete Sqm 27.50
18 Providing & applying primer and one coat of red oxide of iron paint
externally including cleaning the surface of the pipe with steel
scrapers wire brushes and metel cleaning solution etc complete Sqm 60.00
21 Providing & applying primer first coat of interol 49W emaline 05/58
pipe coat or any other equivalent approved paint to the internal Sqm 50.00
surface of pipeline at site.
b) Second coat Sq.m 41.00
a) 5 mm to 8 mm thick.
1 Upto 250 mm. dia. RMT 282
2 Above 250 mm. Upto 500 mm. dia. RMT 332
3 Above 500 mm. Upto 750 mm. dia. RMT 381
4 Above 750 mm. Upto 1000 mm. dia RMT 431
5 Above 1000 mm. Upto 1250 mm. dia. RMT 482
b) Above 8 mm upto 12 mm thick.
1 From 750 mm. Upto 1000 mm. dia. RMT 574
2 Above 1000 mm. Upto l250 mm. dia RMT 640
3 Above 1250 mm. Upto 1500 mm. Dia RMT 706
4 Above 1500 mm Upto 1750 mm. dia RMT 774
5 Above 1750 mm. Upto 2000 mm dia RMT 840
6 Above 2000 mm. upto 2250 mm dia RMT 906
7 Above 2250 mm. upto 2500 mm dia RMT 974
c) Above 12 mm upto 16 mm thick.
1 From 2000 mm Upto 2250 mm dia RMT 864
2 Above 2250 rnm. Uplo 2500 mm dia. RMT 932
3 Above 2500 mm Upto 2750 mm dia RMT 996
4 Above 2750 mm. Upto 3000 mm. dia. RMT 1060
5 Above 3000 mm. upto 3250 mm dia. RMT 1124
6 Above 3250 mm. Upto 3500 mm RMT 1189
d) Above 16 mm upto 20 mm thick
1 From 2500 mm Upto 2750 mm dia RMT 1306
2 Above 2750 mm Upto 3000 mm dia RMT 1378
3 Above 3000 mm upto 3250 mm dia RMT 1450
4 Above 3250 mm Upto 3500 mm did RMT 1522
5 Above 3500 mm Upto 3750 mm dia RMT 1595
6 Above 3750 mm upto 4000 mm dia RMT 1668
e) Above 20 mm upto 25 mm thick
1 Above 3500 mm Upto 3750 mm dia RMT 1778
2 Above 3750 mm upto 4000 mm dia RMT 1880
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
2 Lowering laying in position to correct line and level including M. S.
specials with / without any outcoating such as distance pieces, straps,
bends, tapers, etc. on pedastals or chairs upon perpared formation in
trenches upon prepared formation.The rate to include loading,
unloading hoisting, marginal cutting wherever required, assembling
and tack welding, and transportation upto 500 M. etc. complete.
a) 5 mm to 8 mm thick.
1 Upto 250 mm. dia. RMT 394
2 Above 250 mm. Upto 500 mm. dia. RMT 462
3 Above 500 mm. Upto 750 mm. dia. RMT 534
4 Above 750 mm. Upto 1000 mm. dia. RMT 603
5 Above 1000 mm. Upto 1250 mm. dia. RMT 673
b) Above 8 mm upto 12 mm thick.
1 From 750 mm.Upto 1000 mm. dia. RMT 804
2 Above 1000 mm. Upto 1250 mm. dia. RMT 897
3 Above 1250 mm. Upto 1500 mm. dia. RMT 989
4 Above 1500 mm. Upto 1750 mm. dia. RMT 1082
5 Above 1750 mm. Upto 2000 mm. dia. RMT 1177
6 Above 2000 mm. Upto 2250 mm. dia. RMT 1269
7 Above 2250 mm. Upto 2500 mm. dia. RMT 1362
c) Above 12 mm upto 16 mm thick
1 From 2000 mm. Upto 2250 mm. dia. RMT 1252
2 Above 2250 mm. Upto 2500 mm. dia. RMT 1304
3 Above 2500 mm. Upto 2750 mm. dia. RMT 1394
4 Above 2750 mm. Upto 3000 mm. dia. RMT 1483
5 Above 3000 mm. Upto 3250 mm. dia. RMT 1574
6 Above 3250 mm. Upto 3500 mm. dia. RMT 1664
d) Above 16 mm upto 20 mm thick.
1 From 2500 mm. Upto 2750 mm. dia. RMT 1796
2 Above 2750 mm. Upto 3000 mm. dia. RMT 1877
3 Above 3000 mm. Upto 3250 mm. dia. RMT 2031
4 Above 3250 mm. Upto 3500 mm. dia. RMT 2132
5 Above 3500 mm. Upto 3750 mm. dia. RMT 2232
6 Above 3750 mm. Upto 4000 mm. dia. RMT 2333
e) Above 20 mm upto 25 mm thick.
1 From 3500 mm. Upto 3750 mm. dia. RMT 2488
2 Above 3750 mm. Upto 4000 mm. dia. RMT 2631
3 Lowering laying in position to correct line and level including M. S.
pipes with / without any outcoating, on pedestals or chairs upon piers,
trestles etc. The rate to include loading, unloading hoisting, marginal
cutting wherever required, assembling and tack welding, transportaion
upto 500 M. etc. complete.
a) 5 mm to 8 mm thick.
1 Upto 250 mm. dia. RMT 337
2 Above 250 mm. Upto 500 mm. dia. RMT 396
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
3 Above 500 mm. Upto 750 mm. dia. RMT 457
4 bove 750 mm. Upto 1000 mm. dia. RMT 517
5 Above 1000 mm. Upto 1250 mm. dia. RMT 578
b) Above 8 mm upto 12 mm thick.
1 From 750 mm.Upto 1 000 mm. dia. RMT 689
2 Above 1000 mm. Upto 1250 mm. dia. RMT 768
3 Above 1250 mm. Upto 1500 mm. dia. RMT 848
4 Above 1500 mm. Upto 1750 mm. dia. RMT 928
5 Above 1750 mm. Upto 2000 mm. dia. RMT 1009
6 Above 2000 mm. Upto 2250 mm. dia. RMT 1089
7 Above 2250 mm. Upto 2500 mm. dia. RMT 1167
c) Above 12 mm upto 16 mm thick.
1 From 2000 mm. Upto 2250 mm. dia. RMT 994
2 Above 2250 mm. Upto 2500 mm. dia. RMT 1042
3 Above 2500 mm. Upto 2750 mm. dia. RMT 1194
4 Above 2750 mm. Upto 3000 mm. dia. RMT 1273
5 Above 3000 mm. Upto 3250 mm. dia. RMT 1350
6 Above 3250 mm. Upto 3500 mm. dia. RMT 1416
d) Above 16 mm upto 20 mm thick.
1 Above 2500 mm. Upto 2750 mm. dia. RMT 1566
2 Above 2750 mm. Upto 3000 mm. dia. RMT 1653
3 Above 3000 mm. Upto 3250 mm. dia. RMT 1740
4 Above 3250 mm. Upto 3500 mm. dia. RMT 1826
5 Above 3500 mm. Upto 3750 mm. dia. RMT 1913
6 Above 3750 mm. Upto 4000 mm. dia. RMT 2001
e) Above 20 mm upto 25 mm thick.
1 from 3500 mm. Upto 3750 mm. dia. RMT 2133
2 Above 3750 mm. Upto 4000 mm. dia. RMT 2256
4 Lowering and laying in position to correct line and level including M. S.
specials such as distance pieces, straps, bends, tapers, etc. on
pedestals or chairs up on piers or trestles. The rate to include loading,
unloading hoisting, marginal cutting wherever required, assembling
and tack welding, and including transportation upto 500 M. etc.
complete as specified.
a) 5 mm to 8 mm thick.
1 Upto 250 mm. dia. RMT 472
2 Above 250 mm. Upto 500 mm. dia. RMT 556
3 Above 500 mm. Upto 750 mm. dia. RMT 639
4 Above 750 mm. Upto 1000 mm. dia. RMT 724
5 Above 1000 mm. Upto 1250 mm. dia. RMT 807
b) Above 8 mm upto 12 mm thick.
1 From 750 mm.Upto 1000 mm. dia. RMT 965
2 Above 1000 mm. Upto 1250 mm. dia. RMT 1076
3 Above 1250 mm. Upto 1500 mm. dia. RMT 1188
4 Above 1500 mm. Upto 1750 mm. dia. RMT 1299
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
5 Above 1750 mm. Upto 2000 mm. dia. RMT 1412
6 Above 2000 mm. Upto 2250 mm. dia. RMT 1525
7 Above 2250 mm. Upto 2500 mm. dia. RMT 1635
c) Above 12 mm upto 16 mm thick.
1 From 2000 mm. Upto 2250 mm. dia. RMT 1503
2 Above 2250 mm. Upto 2500 mm. dia. RMT 1563
3 Above 2500 mm. Upto 2750 mm. dia. RMT 1672
4 Above 2750 mm. Upto 3 000 mm. dia. RMT 1781
5 Above 3000 mm. Upto 3250 mm. dia. RMT 1889
6 Above 3250 mm. Upto 3500 mm. dia. RMT 1998
d) Above 16 mm upto 20 mm thick.
1 From 2500 mm. Upto 2750 mm. dia. RMT 2195
2 Above 275Omm. Upto 3000 mm. dia. RMT 2314
3 Above 3000 mm. Upto 3250 mm. dia. RMT 2437
4 Above 3250 mm. Upto 3500 mm. dia. RMT 2555
5 Above 3500 mm. Upto 3750 mm. dia. RMT 2679
6 Above 3750 mm. Upto 4000 mm. dia. RMT 2802
e) Above 20 mm upto 25 mm thick.
1 From 3500 mm. Upto 3750 mm. dia. RMT 2988
2 Above 3750 mm. Upto 4000 mm. dia. RMT 3157
5 Transporting within 500 meters,laying in position to correct line and
level M. S. pipes with / without any outcoating, on prepared bedding in
trenches including marginal cutting wherever required, assembling
tack welding the same. The rate to include loading, unloading,
hoisting, ect. complete as specified.
a) 5 mm to 8 mm thick.
1 Upto 250 mm. dia. RMT 289
2 Above 250 mm. Upto 500 mm. dia. RMT 340
3 Above 500 mm. Upto 750 mm. dia. RMT 391
4 Above 750 mm. Upto 1000 mm. dia. RMT 442
5 Above 1000 mm. Upto 1250 mm. dia. RMT 493
b) Above 8 mm upto 12 mm thick.
1 From 750 mm.Upto 1000 mm. dia. RMT 589
2 Above 1000 mm. Upto 1250 mm. dia. RMT 656
3 Above 1250 mm. Upto 1500 mm. dia. RMT 724
4 Above 1500 mm. Upto 1750 mm. dia. RMT 793
5 Above 1750 mm. Upto 2000 mm. dia. RMT 860
6 Above 2000 mm. Upto 2250 mm. dia. RMT 928
7 Above 2250 mm. Upto 2500 mm. dia. RMT 996
c) Above 12 mm upto 16 mm thick
1 From 2000 mm. Upto 2250 mm. dia. RMT 915
2 Above 2250 mm. Upto 2500 mm. dia. RMT 955
3 Above 2500 mm. Upto 2750 mm. dia. RMT 1021
4 Above 2750 mm. Upto 3000 mm. dia. RMT 1087
5 Above 3000 mm. Upto 3250 mm. dia. RMT 1153
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
6 Above 3250 mm. Upto 3500 mm. dia. RMT 1219
d) Above 16 mm upto 20 mm thick.
1 From 2500 mm. Upto 2750 mm. dia. RMT 1334
2 Above 2750 mm. Upto 3000 mm. dia. RMT 1408
3 Above 3000 mm. Upto 3250 mm. dia. RMT 1483
4 Above 3250 mm. Upto 3500 mm. dia. RMT 1558
5 Above 3500 mrn. Upto 3750 mm. dia. RMT 1632
6 Above 3750 mm. Upto 4000 mm. dia. RMT 1708
e) Above 20 mm upto 25 mm thick.
1 From 3500 mm. Upto 3750 mm. dia. RMT 1817
2 Above 3750 mm. Upto 4000 mm. dia. RMT 1922
6 Transporting within 500 meters,laying in position to correct line and
level M. S. specials pipes with / without any outcoating, such as
distance pieces, straps, bends, tapers, etc. on prepared bedding in
trenches including marginal cutting wherever required, assembling
tack welding, the same. The rate to including loading, unloading,
hoisting, ect. complete as specified.
a) 5 mm to 8 mm thick.
1 Upto 250 mm. dia. RMT 406
2 Above 250 mm. Upto 500 mm. dia. RMT 475
3 Above 500 mm. Upto 750 mm. dia. RMT 548
4 Above 750 mm. Upto 1000 mm. dia. RMT 618
5 Above 1000 mm. Upto 1250 mm. dia. RMT 691
b) Above 8 mm upto 12 mm thick.
1 From 750 mm.Upto 1000 mm. dia. RMT 824
2 Above 1000 mm. Upto 1250 mm. dia. RMT 919
3 Above 1250 mm. Upto 1500 mm. dia. RMT 1013
4 Above 1500 mm. Upto 1750 mm. dia. RMT 1109
5 Above 1750 mm. Upto 2000 mm. dia. RMT 1288
6 Above 2000 mm. Upto 2250 mm. dia. RMT 1345
7 Above 2250 mm. Upto 2500 mm. dia. RMT 1394
c) Above 12 mm upto 16 mm thick.
1 From 2000 mm. Upto 2250 mm. dia. RMT 1282
2 Above 2250 mm. Upto 2500 mm. dia. RMT 1387
3 Above 2500 mm. Upto 2750 mm. dia. RMT 1428
4 Above 2750 mm. Upto 3000 mm. dia. RMT 1521
5 Above 3000 mm. Upto 3250 mm. dia. RMT 1616
6 Above 3250 mm. Upto 3500 mm. dia. RMT 1708
d) Above 16 mm upto 20 mm thick.
1 From 2500 mm. Upto 2750 mm. dia. RMT 1855
2 Above 2750 mm. Upto 3000 mm. dia. RMT 1972
3 Above 3000 mm. Upto 3250 mm. dia. RMT 2078
4 Above 3250 mm. Upto 3500 mm. dia. RMT 2181
5 Above 3500 mm. Upto 3750 mm. dia. RMT 2286
6 Above 3750 mm. Upto 4000 mm. dia. RMT 2391
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
e) Above 20 mm upto 25 mm thick.
1 From 3500 mm. Upto 3750 mm. dia. RMT 2543
2 Above 3750 mm. Upto 4000 mm. dia. RMT 2692
7 Welding in all positions with required number of runs, for M. S. pipes
internally and / or externally including gauging wherever necessary,
fixing appurtenances and other accessories in connection with pipe
laying work as per specification.
a) Butt Joints : Plate thickness:
1 4 mm. RMT 131
2 5 mm. RMT 198
3 6 mm. RMT 465
4 7 mm. RMT 519
5 8 mm. RMT 651
6 10mm. RMT 798
7 12mm. RMT 854
8 14mm. RMT 1018
9 16mm. RMT 1232
10 18mm. RMT 1334
11 20 mm. RMT 1599
12 22 mm. RMT 2008
13 25 mm. RMT 2725
b) Lap joints with convex fillet welds Lag Lengths:
1 5 mm. RMT 183
2 6 mm. RMT 234
3 8 mm. RMT 310
4 10mm. RMT 347
5 12mm. RMT 519
6 14mm. RMT 705
7 16mm. RMT 776
8 18mm. RMT 941
9 20 mm. RMT 1062
10 22 mm. RMT 1419
11 25 mm. RMT 1723
8 Shifiting and aligning ring girders including removing tack welds and re-
tacking in the correct position etc. complete as per specification for the
pipes of following diameter.
1 From 1000 mm, Upto 1250 mm. dia. RMT 355
2 Above 1250 mm. Upto 1500 mm. dia. RMT 435
3 Above 1500 mm. Upto 1750 mm. dia. RMT 513
4 Above 1750 mm. Upto 2000 mm. dia. RMT 592
5 Above 2000 mm. Upto 2250 mm. dia. RMT 670
6 Above 2250 mm. Upto 2500 mm. dia. RMT 749
7 Above 2500 mm. Upto 2750 mm. dia. RMT 827
8 Above 2750 mm. Upto 3000 mm. dia. RMT 908
9 Above 3000 mm. Upto 3250 mm. dia. RMT 987
10 Above 3250 mm. Upto 3500 mm. dia. RMT 1065
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
11 Above 3500 mm. Upto 3750 mm. dia. RMT 1144
12 Above 3750 mm. Upto 4000 mm. dia. RMT 1229
9 Transporting within 500 meters and fixing in position stools, base
plates, roller sets, grease box covers, etc. including welding wherever
necessary. The rate also to include fixing stools, base plates, etc. in
true line and level, connecting the base plate to anchor bolts by flush
welding including cutting the bolts, if required, assembleng and
aligning C. I. or M. S. roller sets of any size including oiling, greasing,
etc. The rate also to include grouting anchor bolts, welding of two
halves of grease box covers as directed by Engineer-in-charge, for
pipes of following dia.
16 Supplying transporting, the S.P. fire hydrants including duck foot bend, No 13090
S.V. and S.V. road box, painting the hydrant,fixing the saddle piece,
supplying, and laying required lenght of C.I. pipeline and jointing the
same spun yarn, molten lead including caulking, fixing the S.V. road
box in one brick masonry chamber in 1:5 C.M. with 12 mm thick 1:3
cement plaster both inside and outside on 1:3:6: C.C.150 mm thick
etc, complete specified and directed. [As per I.S.900/1965 Revised]
20 Providing and applying with mechanical arrangement cement sand Sq.m 363
gunite of 50 mm thickness to floors, walls, floor slabs or any other
structure under 2.1 kg. per sqcm. to 2.80 kg. per sqcm. pressure
including removing the loose materials on surface, cleaning with
comperssed air, degreasing, etc. including scaffolding and curing for
21 days, providing and fixing BRC fabric no. 14 but excluding cost of
reinforcement, if any and removing rebound materials within a lead of
50 M, etc. complete as directed by Engineer-in-charge (for GSRs and
buildings.)
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
21 Providing and applying with mechanical arrangement cement sand Sq.m 476
gunite of 50 mm thickness to floors, walls, roof slabs or any other
structure under 2.1 kg. per sqcm. to 2.80 kg. per sqcm. pressure
including removing the loose materials on surface, cleaning with
compressed air, degreasing, etc. including scaffolding and curing for
21 days, providing and fixing BRC fabric no. 14 but excluding cost of
reinforcement, if any and removing rebound materials within a lead of
50 M, for staging and bottom of bottom slab, etc. complete as directed
by Engineer-in-charge (for RCC ESRs)
22 Providing and making inner cement mortar lining to M.S. pipes with
mechanical devices in cement mortar 1:1 proportion, including cost of
all materials, labour, special sand required, machinery, power
generation, all equipments and taking necessary access openings and
manholes, cuts at suitable intervals as directed by Engineer-in-charge
and rewelding the same after done with doubler plates pipes including
necessary excavation, refilling concerte breaking and remaking if any,
breaking guniting and remaking the same, repainting wherever
required with epoxy paint in 3 coats, all dewatering including emptying
the pipline and refilling the same after done with (water to be supplied
by department free of cost within 5 km. lead at fixed point and all other
arrangements to be done by agency), including carrying out C value
performance test of pipeline, complete job as per the directions of the
Engineer-in-charge.
24 Providing and applying external and internal coating for steel Sq.m 618
structures in sewage treatement plant/water treatement plant
with elastomeric (450% elongation), thermoplastic, fire
retardant, coating skin tensile strength 18 to 21 kg/cm2,
antifungal antibacterial, anticorrosive, graft co-polymer. 50
Micron DFT. of self bonding grade with steel, 50 Micron DFT.
of inner coat and 50 Micron DFT of top coat.
1 6 mm dia MT 29598
2 8 mm dia MT 22648
3 10 mm dia MT 17947
4 12 mm dia MT 14933
5 16 mm dia MT 11182
6 20 mm dia MT 9100
7 25 mm dia MT 7187
8 32 mm dia MT 5759
9 40 mm dia MT 4373
Sr No Item Description Unit Rate
( in Rs.)
2012-2013
28 Providing and applying HDPEcoating for MS pipe internally as
well as externally including cost of HDPE powder moulding
pipes grade , labour , scrapping the pipe surface with wire
brushes, degrading , cleaning by compressed air and surface
grinding and finishing including cost of loading , unloading and
handelling pipes at factory etc. complete as directed by
Engineer - in -Charge ( Factory at Virar Mumbai.).