Professional Documents
Culture Documents
Construction member:
Position: Internal Column 488
Date: March 16, 2017
DECON USA, Inc. 103 East Napa Street, Suite B JORDAHL EXPERT Punching shear Page 1 from 4
www.deconusa.com Sonoma, CA 95476 Version: 4.1.3.16
Responsible: Construction project:
Construction member:
Position: Internal Column 488
Date: March 16, 2017
2.1.4 Stresses
Maximum shear stresss vu = 1.55 MPa
DEC
x/y = 614 mm / -414 mm
Shear resistance (concrete only) vc = 1.58 MPa
Shear resistance (with studrails) vn = 2.22 MPa
Shear resistance (upper limit) vn,max = 3.16 MPa
3. Elements
Number of studrails per column = 14
Number of studs per studrail = 14
Stud diameter D = 12.7 mm
Stud spacing S / S0 = 70 mm / 110 mm
Overall height of studrail OAH = 235 mm
Overall length of studrail OAL = 1130 mm
DECON USA, Inc. 103 East Napa Street, Suite B JORDAHL EXPERT Punching shear Page 2 from 4
www.deconusa.com Sonoma, CA 95476 Version: 4.1.3.16
Responsible: Construction project:
Construction member:
Position: Internal Column 488
Date: March 16, 2017
4. Note
The design against punching shear failure is based on the rules of ACI 318-14.
DEC
This calculation is bases on product specific properties of DECON Studrails. Changes, even to similar
products, are only possible with new calculations.
All data have to be checked with the given edge boundaries and the feasibility. DECON assumes no
liability for the input data of the user.
ON
DECON USA, Inc. 103 East Napa Street, Suite B JORDAHL EXPERT Punching shear Page 3 from 4
www.deconusa.com Sonoma, CA 95476 Version: 4.1.3.16
Responsible: Construction project:
Construction member:
Position: Internal Column 488
Date: March 16, 2017
DEC
ON
DECON USA, Inc. 103 East Napa Street, Suite B JORDAHL EXPERT Punching shear Page 4 from 4
www.deconusa.com Sonoma, CA 95476 Version: 4.1.3.16