Professional Documents
Culture Documents
Data sheet
Up to 25 % more yield thanks to highly-efficient bifacial Harmonized components such as mounting systems,
cell technology – light from all directions is transformed connector cables, inverters and energy storage sys-
into power through the active rear side of the module tems can be delivered as complete system
Lower BOS costs than for 60-cell modules – faster Patented drainage corners for optimized self-cleaning
return on investment Front glass with an anti-reflective coating
Tested in extreme weather conditions – resistance to Long-term safety and guaranteed top performance –
salt spray, frost and hail-proof, resistance to ammonia, 25-year linear performance warranty 10-year product
dust and sand warranty
PID-resistant and proven hotspot guarantee
www.solarworld.com
SW 325 XL DUO
PERFORMANCE UNDER Optimized Conditions
Energy boost 6% 10 % 20 % 25 %
Maximum power Pmax 343 Wp 355 Wp 385 Wp 400 Wp
Open circuit voltage Uoc 39.0 V 39.0 V 39.0 V 39.0 V
Maximum power point voltage Umpp 37.3 V 37.2 V 37.0 V 36.9 V
Short circuit current Isc 9.84 A 10.21 A 11.14 A 11.60 A
Maximum power point current Impp 9.20 A 9.55 A 10.42 A 10.85 A
Module efficiency ηm 17.20 % 17.80 % 19.30 % 20.04 %
PERFORMANCE UNDER STANDARD TEST CONDITIONS (STC)* PERFORMANCE AT 800 W/m², NOCT, AM 1.5
Maximum power Pmax 325 Wp Maximum power Pmax 242 Wp
Open circuit voltage Uoc 47.0 V Open circuit voltage Uoc 42.9 V
Maximum power point voltage Umpp 37.7 V Maximum power point voltage Umpp 34.4 V
Short circuit current Isc 9.28 A Short circuit current Isc 7.50 A
• Qualified,•IEC 61215 IEC 61215
Qualified,
Maximum power point current Impp 8.68 A Maximum power point current Impp • Safety tested,
• Blowing sand
7.01 A
IEC 61730
• Safety tested, IEC 61730
resistance, IEC 60068-2-68
• Blowing sand resistance, IEC 60068-2-68
ηm ηm
• Ammonia•resistance, IEC 62716 IEC 62716
Module efficiency 16.29 % Module efficiency Ammonia resistance,
12.15 %
• Salt mist corrosion,
• Salt mistIEC 61701 IEC 61701
corrosion,
• Periodic inspection
• Periodic inspection
Measuring tolerance (Pmax) traceable to TUV Rheinland: +/- 2 % Minor reduction in efficiency•• Qualified,
under
Safety tested,partial
IEC 61215
IEC 61730 load conditions
• Periodic inspection at 25°C:
• Periodic inspection
• Qualified,•IEC 61215controlled
(TUV Power controlled, ID 0000039351) at 200 W/m², 97% (+/-3%) of the STC efficiency
• Blowing sand resistance, IEC
• Ammonia resistance, • Safety (1000
60068-2-68
IEC 62716
Power
W/m²) is achieved.
• Power controlled
tested, IEC 61730
• Blowing sand resistance, IEC 60068-2-68
• Salt mist corrosion, IEC 61701
*STC: 1000 W/m², 25° C, AM 1.5 • Periodic inspection • Ammonia resistance, IEC 62716
• Salt mist corrosion, IEC 61701
• Periodic inspection
• Periodic inspection
• Power controlled
• Periodic inspection
• Safety
• Safety tested, tested, IEC 61730
IEC 61730
• Blowing sand• Blowing sand
resistance, resistance,
IEC 60068-2-68IEC 60068-2-68
961
Number of bypass diodes 3
Operating range -40°C - +85°C 106.65 - +
4 x ∅ 6.6
Maximum Design Loads (Two rail system)* +2.4 kN/m² / -2.4 kN/m²
292.85
*Please refer to the Sunmodule Installation instructions for the details associated with these load cases.
4x∅9
397
COMPONENT MATERIALS
Cells per module 72
1200
(10 x 7) (4)
1993
SolarWorld AG reserves the right to make specification changes without notice. This data sheet complies with the requirements of EN 50380.