Professional Documents
Culture Documents
Fuzzy Logic
Fuzzy Logic
In this era of digital control, almost every appliance is controlled using the digital
control level using 1 and 0. But just think, isnt it quite unpractical to think every output
of the daily processes you come across, depends only on two states of the input. No,
Definitely. Just imagine your mother cooking some tasty food and you cant stop
yourself from praising her. So how the food does becomes so tasty? With addition of
ingredients in proper quantity and proportion, of course. So how does she manage
that? With a perfect numerical knowledge of the quantities? Not always. She does that
with a known idea, which definitely comes with experience. This is where comes the
idea of a control logic which uses the degrees of input state rather than the inputs itself;
a logic which doesnt requires some perfect inputs, but rather works with only a typical
estimation of the inputs. This is fuzzy logic.
What is Fuzzy Logic?
Fuzzy logic is a basic control system which relies on the degrees of state of the input
and the output depends on the state of the input and rate of change of this state. In
other words, a fuzzy logic system works on the principle of assigning a particular output
depending on the probability of the state of the input.
Suppose we want to control a system where the output can be anywhere in the set X,
with a generic value x, such that x belongs to X. Consider a particular set A which is a
subset of X such that all members of A belong to the interval 0 and 1. The set A is
known as fuzzy set and the value of f A(x) at x denotes the degree of membership of x in
that set. The output is decided based on the degree of membership of x in the set. This
assigning of membership depends on the assumption of the outputs depending on the
inputs and the rate of change of the inputs.
These fuzzy sets are represented graphically using membership functions and the
output is decided based on the degree of membership in each part of the function. The
membership of the sets is decided by the IF-Else logic.
Generally the variables of the set are the state of the inputs and the degrees of changes
of the input and the membership of the output depends on the logic of AND operation of
the state of the input and the rate of change of the input. For a multi input system, the
variables can also be the different inputs and the output can be the possible result of the
AND operation between the variables.
A Controller which performs the fuzzy logic operation of assigning the outputs based
on the linguistic information. It performs approximate reasoning based on human way of
interpretation to achieve the control logic. The controller consists of the knowledge base
and the inference engine. The knowledge base consists of the membership functions
and the fuzzy rules, which are obtained by knowledge of the system operation
according to the environment.
The Defuzzifier converts this fuzzy output to the required output to control the system.
If the measured value is between 30C to 40C, the room is quite hot
The next step involves the functioning of the knowledge base which
contains the information of these member functions as well as the rule
base.
For example, if Room is too hot AND room is getting heated up rapidly, then set the fan
speed to High
If Room is too hot AND room is getting heated up slowly, then set the fan speed to less
than High.
The next step involves converting this linguistic output variables into
numerical variables or logical variables used to drive the fan motor driver.
The final step involves controlling the fan speed by giving proper input
to the fan motor driver.
So this is a brief overview about the Fuzzy Logic, any further inputs are welcome to be
added.
Google+
Post navigation
PREVIOUSIndustrial Star Delta Starter for a 3-Phase Induction Motor
NEXT AC Power Supplies at Home
RELATED CONTENT