Professional Documents
Culture Documents
FITTINGS
AIR-CONDITIONING
REFRIGERATION FITTINGS
Generally for use in domestic and commercial
Refrigeration & Air-conditioning
Contents
Item Page
Flare nut A- 1
Coupling Union A- 2
Dead Plug- & seal cap A- 3
Adapter A- 4
Liquid receiver Valve A- 5
Service Valve A- 6
Charging Valve A- 7
Line Valve A- 8
Air Vent Mug A- 9
Access valve A-10
Gauge Cock A-11
Stainless Steel Fittings A-12
Brass Elbow, Tee & Cross A-13
Sleeve Washer A-14
Ferule Connector A-15
Flare nut
** Please use Enquiry Form to obtain further details (photographs, sketches and other specs) of the
products
COUPLING UNION
EQUAL UNION (MEDIUM LENGTH)
PRODUCT FLARE LENGTH HEX BAR
NUMBER SIZE A & B SIZE
5422015 3/16” 1” 3/8”
5422020 1/4 1-1/8 7/16
5422025 5/16 1-1/4 1/2
5422030 3/8 1-7/16 5/8
5422040 1/2 1-1/2 3/4
5422050 5/8 1-3/4 7/8
5422060 3/4 2-1/8 1-1/16
5422070 7/8 2-7/16 1-1/4
VALVE UNION
The (valve) union contains a core valve inside its 1\4” flare side to facilitate easy
pressure charging.
** Please use Enquiry Form to obtain further details (photographs, sketches and other specs) of the
products
** Please use Enquiry Form to obtain further details (photographs, sketches and other specs) of the
products
ADAPTER
ADAPTER (Flare internal X flare external)
** Please use Enquiry Form to obtain further details (photographs, sketches and other specs) of the
products
Strongly built hot forged main body ensures long and trouble free life even under tough and rough open
air conditions. Light weight metal cap fixed after adjustment of spindle is a safety device for continuous
and unaltered flow of the refrigerant and a protection against atmospheric disturbance and unwanted
incursion.
The valves have large opening ports to provide for maximum desirable flow with least hindrance.
Heavy duty construction enables the valves to give long trouble free life to the outdoor unit.
Square model
PANTHER model
Metallurgical composition:
Line Valve
DIRECT STEM TYPE
ALPHA Line Valves, based on a new conception of line control valves have been developed to ensure
unhindered flow of fluids/refrigerants. Heat stabilized Teflon disc tipped on self-guided stem gives a
convenient and accurate closure of valve as and when required. Ring protection washers will not allow
the refrigerant to leak out of the system.
Product number:
5614503 5614904 5614703
Options available:
ALPHA AIR VENT MUG, a sure remedy against air pockets/air locking of chilled/normal/hot water pipe
line: lets the air leak out of pipe automatically: enables smooth and unhindered running of fluid but does
not allow the liquids to flow out.
ALPHA AIR VENT ASSEMBLY consists of one Upper Cup and a Pipe Insertion Valve/Support Adapter.
Pipe insertion Valve used without Upper Cup may also perform the required function but it has to be
operated manually. When fitted with Upper Cup it will need no manual care and shall automatically keep
the fluid flowing no matter how many times the pump stops functioning. Along with the brass natural
finish, chromium plated corrosion resistant version is also available.
A convenient, efficient and time saving device; made from high pressure drawn brass and seamless
copper tube; available in various copper pipe and flare connection sizes; supplied with round (knurled) or
hexagonal shape protection (seal) cap, with or without valve opener.
A-10
ALPHA Gauge Cock , control valve (popularly known as MANI VALVE) is prepared from hard drawn brass
hex and round bar; can be used in running lines of steam, (hot or normal) oil/water and gases.
A delicate degree based spindle seal supported by tough Teflon washer stops the pressure to leak.
Various forms/shapes are available in sizes from 1/4 inch to 3/4 inch. Stainless steel bar handle or round
control knob (pin stem type) models are available at customer’s choice.
Rod (spindle)type
Product number Connection size (inch)
5955202 1/4 PT
5955303 3/8 Pin Stem-
5955404 1/2
Knob type 5955606 3/4
Product number Connection size (inch)
5956202 1/4 PT
5956303 3/8
5956404 1/2
5956606 3/4
A-11
A-12
** Please use Enquiry Form to obtain further details (photographs, sketches and other specs) of the
products
BRASS ELBOW, TEE & CROSS
5964020 1/4
5964025 5/16
5964030 3/8
5964040 1/2
5964050 5/8
5964060 3/4
5964070 7/8
A-13
** Please use Enquiry Form to obtain further details (photographs, sketches and other specs) of the
products
SLEEVE WASHER
A safe short cut of copper or brass pipe extending/joining by-passing the lengthy and laborious system
of flare making. The correct and precise inside diameter ensures a leak proof and long life joint. Available
in different lengths of 45 and 30 degree seat slope shapes.
FERULE CONNECTOR
ALPHA ferule Connector is a convenient and time saving device to connect pipe lengths of various sizes
without going into botheration of flare making.
A-15
Charging Valve
Alpha Charging Valves designed and developed with a view to provide long and trouble free service to the
engineer in workshop and even at-site tough working conditions. Double protection seal along with the Teflon
tipped solid brass stem ensures leak proof performance and perfection, total/partial closure of valve and
controlled flow of refrigerant. You can all the time read charged gas pressure on the gauge dial whether the valve
inlet ports are open or closed.
Charging valves are available in blue, red and black knobs, which facilitate distinction of common, high or low
pressure lines.
ALPHA-ROBIN model
Product Number: 5613702
Total height : 2-5/8” (open position)
Total width : 1-9/16”
** Please use Enquiry Form to obtain further details (photographs, sketches and other specs) of the
products