You are on page 1of 2

OV4689 4MP product brief

High Frame Rate 4-Megapixel CameraChip Sensor


lead free
with Excellent Low-Light Sensitivity and
available in
a lead-free
High Dynamic Range for Security Applications
package

The OV4689 is a high performance 4-megapixel "alternate row HDR". The benefits of using "staggered
CameraChip sensor in a native 16:9 format designed for HDR" compared to "sequential HDR" are significant
next-generation surveillance and security systems. The reduction in motion artifacts and lower memory
sensor utilizes an advanced 2-micron OmniBSI-2 pixel to requirement for host processing. These modes produce
provide best-in-class low-light sensitivity and high high quality full-resolution 4-megapixel HDR video under
dynamic range (HDR). extreme variations of bright and dark conditions,
ensuring high contrast and excellent scene reproduction.
The 1/3-inch OV4689 can capture full-resolution
4-megapixel high definition (HD) video at 90 frames per The OV4689 features a high-speed 4-lane MIPI serial
second (fps), 1080p HD at 120 fps, and binned 720p HD output interface to facilitate the required high data
at 180 fps. The sensor's high frame rates enable crisp, transfer rate. The OV4689 is available in a chip scale
clean image and video capture of fast moving objects. package (CSP).

The OV4689 provides timing to capture full-resolution Find out more at www.ovt.com.
HDR using frame-based "sequential HDR" or line-based
"staggered HDR", and quarter resolution HDR using
Applications OV4689
Security and Surveillance

Ordering Information
Product Features
OV04689-H67A
automatic black level calibration (ABLC) standard serial SCCB interface (color, lead-free, 67-pin CSP5)

programmable controls for frame rate, up to 4-lane MIPI serial


mirror and flip, cropping, and windowing output interface

static defective pixel canceling embedded 4K bits one-time

supports output formats:


programmable (OTP) memory
for part identification, etc
Product Specifications
10-bit RAW RGB (MIPI)
two on-chip phase lock loops (PLLs) active array size: 2688 x 1520 max S/N ratio: 38.3 dB
supports horizontal and
vertical subsampling programmable I/O drive capability power supply: dynamic range: 64.6 dB @ 1x gain
- core: 1.1 ~ 1.3V
supports images sizes: 4MP, 3MP, built-in temperature sensor - analog: 2.6 ~ 3.0V maximum image transfer rate:
EIS1080p, 1080p, EIS720p - I/O: 1.7 ~ 3.0V - 2688x1520: 90 fps
supports staggered, sequential and - 1920x1080: 120 fps
fast mode switching alternative row HDR timing power requirements: - 1280x720: 180 fps
- active: 163 mA (261 mW)
support 2x2 binning, 4x4 binning, - standby: 1 mA sensitivity: 1900 mV/lux-sec
re-sampling filter - XSHUTDOWN: <10 A
scan mode: progressive
temperature range:
- operating: -30C to +85C junction maximum exposure interval: 1548 x TROW
temperature
- stable image: 0C to +60C junction pixel size: 2 m x 2 m
temperature
dark current: 4 mV/sec
output formats: 10-bit RAW RGB data @ 60C junction temperature

lens size: 1/3" image area: 5440 m x 3072 m

input clock frequency: 6 ~ 64 MHz package dimensions:


6630 m x 5830 m
lens chief ray angle: 0

Functional Block Diagram

OV4689
image sensor core image image output
sensor interface
column
processor
sample/hold
row select

OTP_DPC

image 10-bit MCP/N


FIFO

MIPI

AMP MDP/N[3:0]
array ADC

temperature gain
sensor control

control register bank

PLLs PLL timing generator and system control logic SCCB interface
EXTCLK

PWDNB

XSHUTDOWN

TM

FSIN

VSYNC

FREX

STROBE

GPIO

HREF

SID

SIOC

SIOD

4275 Burton Drive Tel: + 1 408 567 3000 OmniVision reserves the right to make changes to their products or to discontinue any product or
service without further notice. OmniVision and the OmniVision logo are registered trademarks of
Santa Clara, CA 95054 Fax: + 1 408 567 3001 OmniVision Technologies, Inc. CameraChip, OmniBSI-2, OmniBSI+ and OmniBSI are trademarks
USA www.ovt.com of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.

Version 1.4, December, 2015

You might also like