Professional Documents
Culture Documents
Component Access/Replacement
Replace cover (in slots) Insert latch into tabs Bend tabs back
56
VI. Component Access/Replacement
Aqua Sensors
The aqua sensor is located on the rear of the sump. It
can be reached through the left side of the dishwasher
(after the left side panel is removed). Its not necessary
to block up the tank to reach the aqua sensor.
Tank HINT: To change out the aqua
sensor, pull off the connector
Sump and pull out the aqua sensor
(toward the rear of the
dishwasher).
Base
HINT: The aqua sensor slides
into slots in the sump. Make
sure the aqua sensor is properly
inserted into the slots.
57
VI. Component Access/Replacement
58
VII. Component Testing/Test Procedures
To enter test programs, hold down buttons above (2nd & 4th from left),
then turn dishwasher on by pushing on/off button. Push buttons above a
2nd time to start test program. Allow program to finish to see fault codes.
Turn dishwasher off to exit test program.
59