Professional Documents
Culture Documents
Installation Description
800xA System for AC400M
3.3 Install RMC functionality to all other servers than Aspect server and to all Client PC,s
This chapter describes the procedure to install the files with RMC functionality to all other
servers than Aspect server and to all Client PC,s delivered with on the RMC 800xA
System Installation Software CD.
1. Install rdCtl2 by executing the setup.exe file in the folder \Graphic Primitives\rdCtl2
on all other servers than Aspect server and to Client PC,s.
2. Install rspCtl by executing the setup.exe file in the folder \Graphic Primitives\rspCtl
on all other servers than Aspect server and to Client PC,s.
3. Set the security settings of Internet Explorer to accept unsigned components (Set
temporarily to LOW) and install rspDisplayMenu by opening the
rspDisplayMenu.htm file in the folder \Graphic\Primitives\rspDisplayMenu. Answer
Yes if you get a question whether to install the ActiveX or not. Repeat for all other
servers than Aspect server and to Client PC,s .
3.4.2 Install SMS rolling mill functionality in all other HMI than ABB-ASPECT-FM
PROPC software is installed in all ABB PCs except ABB-ASPECT-FM and ABB-
DONMAIN-ABB as client. Install the PROPC software in these PCs as described for a
Client in document User Manual, Installation PROPC, Version Eng.:1.0-000.
.