Professional Documents
Culture Documents
from
Georgia-Pacific
planter bench
planter bench
MATERIALS LIST
6 2" x 4" x 8' treated lumber NOTE: In some applications you may use screws
3 1" x 6" x 8' treated lumber instead of nails for better hold down power.
6d hot-dipped galvanized
or zinc coated nails (as required) TIP: Use water repellent or stain with water
16d hot-dipped galvanized repellent when your job is finished to help protect
or zinc coated nails (as required) your pressure treated wood from splitting,
checking, and warping.
NOTE: All wood products are pressure treated with
Chromated Copper Arsenate preservative. All wood
products in contact with the ground should be treated
to a .40 ground contact retention.
TOP VIEW
1 1/2" 1 1/2"
1 1/2" 3/4"
1 7/8"
1 7/8"
1 1/2" 3/4"
1 1/2"
57"
SIDE VIEW
60"
12 1/2"
16"
12 Pcs.
Leg 1" x 6" x 16" Sides
Brace
END VIEW
12"
21" 2" x 4"
Floor Bracing
2 Pcs. Req.
16"
www.gp.com
Treated Lumber
2000 Georgia-Pacific Corporation. All rights reserved.
Printed in the U.S.A. 6/00. Lit. Item #121774.