Professional Documents
Culture Documents
Working Instruction PDF
Working Instruction PDF
Contents
1 Speaker Connectors ........................................................................................................2
2 LCD Repair ....................................................................................................................3
3 Revision History ..............................................................................................................4
1 Speaker Connectors
The speaker connectors are easier to remove if their plastic parts are removed first.
The new connectors can be soldered to the board without the plastic parts also, but it is very
important to align the connectors properly so the plastic parts will fit on them.
2 LCD Repair
2.1 Tools
Small screwdriver.
Soldering iron.
Solder cream or Solder paste.
Gel Flux.
Texas air.
2.2 Equipment
ESD-gloves (cotton gloves).
ESD-wristband.
2.3 Instruction
Disassemble the phone as described in Working Instruction 3/000 21-1/FEA 209 544/90
(1 Disassembly)
# Figure Instruction Note
1 Locate the 4 pins flex film.
Fig. 2
8 Use a soldering iron to solder Do not use to high
the flex film. temperature and do not heat
to long. The flex film pads
are very sensitive.
3 Revision History
Rev. Date Changes / Comments
A 2004-08-13 Initial Release
B 2004-12-20 LCD repair added (Touch Screen replacment)