Professional Documents
Culture Documents
Network Topology: Service Processor Installation Checklist
Network Topology: Service Processor Installation Checklist
With a shared network topology, the system and SP share the internal
customer network. A shared topology requires all of the following:
A static IP address and system name for the system
A minimum two Ethernet connections from a switch or hub to the system
controller nodes, if there are more than two controller nodes
A static IP address for the SP
One Ethernet connection from a switch or hub to the SP
Service processor installation checklist
HP 3PAR Service Processor
HP StoreServ serial number
The HP 3PAR StoreServ system serial number can be obtained from the
following:
Located at the rear of the system next to the power switch for the
controller node enclosure PCM
Located in the product documentation provided with your system
SP Host Name
NOTE:
poweredDuring the SP setup process, the HP StoreServ
subnet as must beand
on, connected to the same network the SP,
non-initialized to allow the SP to verify the HP StoreServ serial
number.
Subnet mask
Gateway IP address
DNS settings:
Domain name
DNS servers
New password to assign setupusr (for use with the system setup
wizards)
NOTE: All passwords for theand
setupusr username must be between 7
and 32 characters in length can consist of alphanumeric
characters and (=),
the following special
slashcharacters: period (.), plus (+),
dash (-), equal and forward (/).
New password to Customer
assign 3parcust to access HP 3PAR Service
Processor Onsite Care (SPOCC)
NOTE: All passwords for the 3parcust username must be between 7
and 32 characters
and thein length and can characters:
consist of alphanumeric
characters following special period (.), plus (+),
dash (-), equal (=), and forward slash (/).
3 PAR System software installation checklist
HP 3PAR StoreServ Storage
HP StoreServ serial number system
The HP 3PAR StoreServ system serial number can be obtained from the
following:
Located at the rear of the system next to the power switch for the
controller node enclosure PCM
Located in the product documentation provided with your system
HP StoreServ system name
Subnet mask
Gateway IP address
HP 3PAR SmartStart