Professional Documents
Culture Documents
Elastomer Guide Chemical Compatibility PDF
Elastomer Guide Chemical Compatibility PDF
Elastomer Compounds
and
Chemical Compatibility
Contents
1 Introduction 4
3 PPE Services 6
Component design and computer modelling 6
Polymer materials consultancy and testing 7
Online seal selection resource for engineers 9
14 A-Z index 65
Introduction
Precision Polymer Engineering Limited Industries in which PPE has supplied sealing
solutions include:
delivers elastomer sealing solutions to
the worlds leading industrial markets. Aerospace
Bio-analytical
Founded in 1974, Precision Polymer Engineering Ltd Chemical Processing
(PPE) has over 30 years experience in designing and Food, Dairy and Brewing
manufacturing high performance O-rings and Marine Diesel Engines
technical elastomer components. Military / Defence
Nuclear
With an unrivalled materials range of over 350 Oil and Gas
different compounds, PPE has an elastomer for Pharmaceutical
every application. Power Generation
Semiconductor
The combination of advanced materials, technical Water
expertise, rapid tooling, design and manufacturing
Seals and components any size, any geometry.
support services is unmatched in the sealing industry.
PPE can provide an infinite number and variety of
fully moulded parts including:
4
Why Use PPE?
Why Use PPE?
Technical Support
Question:
Support and expert technical advice are always on hand at
What if you could extend maintenance cycles, optimize
PPE. Our engineers and material technologists are able to
process conditions, reduce cost of ownership, and/or
provide support on component design, material selection and
increase the efficiency, performance and reliability of your
compatibility, testing and analysis. Our consultancy service
equipment?
and field support includes on-site assistance with problem
solving and troubleshooting.
PPE gives you access to the latest skills and expertise in
elastomer technology to ask what if?
In-house tooling
With many years experience across a wide range of industries,
Tool design and manufacture is undertaken in-house using the
PPE can make a valuable contribution to
latest CAD and CNC machining techniques. This allows PPE
your business and help you achieve your goals.
to manufacture competitive tooling within hours of the initial
design concept, which results in exceptionally short lead times
PPE aims to become the partner of choice for original
for non-standard and custom designed components.
equipment manufacturers, end-users and distributors around
the world. If you are interested in developing your what ifs
into viable business solutions, call PPE today on: Manufacturing facilities/capabilities
+44 (0) 1254 295400. PPEs manufacturing facility contains some of the most
advanced equipment in Europe, with the capability of
Standard and non-standard O-rings producing fully moulded rubber components up to 2 metres in
diameter. In addition, critical parts are manufactured in a clean
High performance, fully moulded O-rings are manufactured to
room environment and a policy of continuous improvement,
order and available in an infinite range of sizes between
supported by extensive investment in facilities, promotes
0.25mm and 2000mm internal diameter, with order quantities
constant efficiency improvements.
ranging from 1 to medium volumes.
Lead-times
Training and education
Responsive rapid manufacturing service and express delivery
With the benefit of over 30 years experience in polymer
enable parts to be supplied with some of the shortest lead times
technology and precision component manufacturing, PPE
in the industry, measured in days rather than weeks.
offers bespoke training courses which are tailored to your
needs. Our experts will provide delegates with a wealth of
Technical design service for customised
knowledge relating to polymer and sealing technology, from a
solutions basic level right up to advanced and specialist subjects.
Problem solving is central to our culture, providing customers with
optimal design solutions which exceed expectations. PPE has the
ability to produce and import electronic Computer Aided Design
(CAD) drawings using the latest software, as well as using 2D and
3D Finite Element Analysis (FEA) modeling to explore what if
scenarios, ensuring the final seal design is right first time.
(See page 6 for more details).
PPE offers a One Stop Shop for all your elastomer sealing requirements.
5
PPE Services
Component design and computer modelling services
Precision Polymer Engineering Ltd (PPE) offers a PPE is design-certified to ISO 9001:2000; our team of
comprehensive design and modelling service for seals, custom designers captures customer requirements and translates
moulded elastomers and bonded components. these into hardware recommendations and custom
designs. Various formats of electronic drawings are
Typical services include: accepted including IGES, STEP, PARASOLID, PRO-E ,
Material recommendations, based upon chemical and Inventor, DXF, DWG, plus many others. These can be
mechanical constraints imported into SolidWorks for our team of design
O-ring size optimisation to maximise sealing efficiency engineers to work with. Components are designed in 3D
and life expectancy CAD, and when required, are modelled using FEA.
Groove size recommendations
Custom seal design
FEA is used to predict contact forces, deformation and stress levels within the
component. In order to maximise the accuracy of modelling, PPE engineers
generate temperature specific material models for specific applications. By
minimising stresses within an elastomer we can reduce the effect of stress-induced
chemical attack and therefore prolong the life of a component in application.
6
Polymer materials consultancy & testing services
PPE Services
Precision Polymer Engineering offers an extensive range
of independent testing and consultancy services for Some of the key testing aspects:
companies and organisations which are looking for chemical compatibility testing
assistance in investigating polymer materials of any sort.
failure analysis
As our core operations are very closely connected with
microscopy
material development, industrialisation and processing, we are
not just another test house or consultant. We are an ideal thermo-mechanical evaluation
partner for organisations seeking practical support to solve a
challenge be it manufacturing, processing, evaluation, failure physical property determination
analysis or optimisation.
Testing resources:
Utilising advanced techniques in material analysis, PPE
provides material characteristics and test data using the
following equipment:
Differential Scanning Calorimeter (DSC)
Thermogravimetric analysis (TGA)
Fourier-transform infra-red (FTIR) with attenuated total
reflectance (ATR) accessory
Melt-flow indexer
Shore A hardness meter
IRHD hardness meter
IRHD micro-hardness tester
Tensometer, with environmental chamber and laser
extensometer
Reflux and extraction apparatus.
Densometer
Explosive decompression (ED) testing rig
High pressure seal leak testing
Testing capabilities
Utilising the most modern analytical techniques, PPE provides
detailed analysis of materials. This work takes a number of Analysis capabilities:
different forms:
Formulation and deformulation
Failure Analysis
Research and development
A seal that has failed in an application is analysed using various
techniques to identify the cause and mode of failure. This often Failure analysis
includes differentiating between thermal and chemical Methods/process development
degradation and investigating other possible causes - such as
mechanical failure, environmental stress, premature ageing, Data interpretation
contaminants/inclusions and poor design. PPE provides Polymer identification
assistance in recommending alternative designs or materials.
Molecular weight distribution (Rheological method)
7
PPE Services
Polymer materials consultancy & testing services
Thermo-mechanical Evaluation
Using environmental chambers to test the physical properties of materials at actual or elevated operating temperatures provides
practical results which are much more representative of real-life applications. The data is then used in computer modelling to create
accurate simulations of appropriate seal designs.
Thermal Analysis
Differential Scanning Calorimetry (DSC)
DSC analysis compares the exothermic and endothermic
reactions of samples and a reference, as the sample and
reference are heated through a defined heating regime. The
technique enables the accurate determination of glass transition
temperatures, crystallization and melting points and in the case
of elastomers, cure characteristics. This technique is valuable for
failure analysis and compound development.
Spectroscopy
Infra-red Spectroscopy (FTIR)
FTIR involves passing an infra-red light through or impinging on a sample of material. The light gives up some of its energy, causing
various molecular structures in the sample to vibrate, twist or stretch; the resultant light is then compared with a reference light
stream and the result is represented as a characteristic plot of peaks. This technique is helpful in fingerprinting materials, failure
analysis and compound development.
8
Online seal selection resource for engineers
PPE Services
A one-stop seal selection resource for engineers.
www.prepol.com Includes useful tools and wizards which are quick, free and easy to use.
The document library includes PDF newsletters and technical guides covering: types of elastomer compounds, chemical
compatibility, food and pharmaceutical seals and seals for diesel engines.
9
PPE Services
Online seal selection resource for engineers
A one-stop seal selection resource for engineers.
www.prepol.com Includes useful tools and wizards which are quick, free and easy to use.
Online Helpdesk
Need help? Got a sealing problem? Look no further than our experts
If you have a question relating to any aspect of elastomer seals weve probably been asked it before. For a quick answer,
consult our Frequently Asked Questions (FAQ) page which is constantly updated. If your question doesnt already appear,
dont be afraid to ask our team of experts, and they will respond promptly.
10
As part of the PPE Group of companies, Perlast Limited
specialises in the manufacture of the latest generation of
perfluoroelastomer materials.
Perfluoroelastomers
properties combined with excellent chemical resistance.
This high performance material combines the chemical and thermal resistance of
polytetrafluoroethylene (PTFE) with the elastomeric properties of fluorocarbon (FKM).
is available as AS, BS, metric and custom O-rings, custom mouldings, bonded
parts and sheets, in a range of hardnesses from 50 to 90 Shore and in a range of colours.
Key Industries
Semiconductor & Flat Panel Display (FPD)
The flexibility of Perlast Plasma resistant and ultra-pure grades.
provides a number
of advantages: Pharmaceutical & Bio-anaylitical
FDA and USP Class VI compliant grades.
Available as AS, BS, metric and
imperial standard O-rings and Chemical Processing
non-standard sized O-rings, plus Fully fluorinated compounds offer the highest
custom components, composite level of chemical resistance.
parts and bonded parts.
For more information on Perlast , request a copy of the Perlast Brochure or visit www.perlast.com.
11
Seal selection
Selecting the correct seal
The process of selecting a seal must take account of a range of different criteria to ensure that
the optimal material grade and seal size or design is suitable for the application.
Key selection criteria broadly fall into three main categories: the service conditions;
hardware and seal design considerations; and regulatory or approval requirements.
What temperature will the seal be subjected to (both Will a standard size O-ring be acceptable, or is a
maximum and minimum) in storage, normal operation non-standard size O-ring or a custom design required?
and extreme conditions (such as equipment overload
How will the seal be installed? Does it need to be
scenarios)?
self-retained during hardware assembly?
Will the seal be exposed to low or high pressure?
Are there other constraints which will affect seal
Will this be constant or cycling?
dimensions and tolerances, such as hardware out of
Will the seal be used in a static or dynamic environment? flatness?
If used dynamically, will the movements be reciprocating What is the surface finish of the hardware?
or rotary?
Are there any constraints on cost versus reliability?
Are there other constraints such as exposure to
weathering (eg, UV light, ozone), flame retardancy,
electrical conductivity?
Approval/Specification requirements
What is the seal life expectancy and what are the
consequences of seal failure? What customer specifications are required?
The flowchart opposite summarises the main steps involved in a selecting the correct seal. To assist engineers further with the
selection process, PPE has developed various online tools available at www.prepol.com
Seal selection
Identify operating temperature Identify process media
range (max. & min.) and environment
STATIC
Is the
LOW PRESSURE operating pressure HIGH PRESSURE
high or low?
Select softer Select harder
material grades material grades
NO
Is an
CUSTOM PART O-ring or custom
part required?
O-RING
Contact PPE to
discuss requirements Identify standard size availability
(metric/imperial)
Standard Standard
(metric) (imperial)
Fluorine
Type Advantages/Disadvantages
Content
Contains two monomers (simple molecules from which polymers are built).
General purpose, most common, most widely used for sealing.
Copolymer
65-65.5% Best compression set and very good fluid resistance.
(A/E) Often referred to as 'A' and 'E' type grades.
These are normally the least cost types of compound.
Contains three monomers.
Better fluid and oil/solvent resistance than copolymers but at the expense of
Terpolymer
67% poorer compression set resistance.
(B or F) Often referred to as 'B' or F type grades.
F grades offer superior fluid resistance over B grades.
16
Elastomer types and properties
PTFE (Polytetrafluoroethylene)
Polytetrafluoroethylene is not an elastomer but an extremely
inert thermoplastic, unaffected by virtually all known solvents.
It also exhibits this inert characteristic over a wide range of
temperatures. Its hardness and lack of elasticity prevents its
general use as an elastomeric sealing ring, but it is often used
as a back-up ring. Typical applications are backing rings,
bearings and non-stick requirements, or for use in composite
seals when combined with elastomers.
Defence Standard 02-337 (NES 337) defines O-ring seals From our extensive range of elastomer compounds we can offer
used on UK Ministry of Defence Surface Ships & Submarines materials that meet various international approvals and
and their associated systems and equipment. Typical system conformance requirements, enabling us to provide superior
applications include hydraulics, lubrication systems, fuel sealing solutions for pumps, valves, mechanical seals, pipe
systems and pneumatics. PPE offers a complete range of couplings and reactors which meet the needs of our customers.
nitrile and fluorocarbon elastomer materials to meet the
Pharmaceutical & Bio-analytical
requirements of this specification.
PPE offers a full range of sealing solutions for pharmaceutical and
Nuclear bio-analytical industries where both mechanical and chemical
Expertise and capabilities in the design and development of properties are crucial, and hygienic sealing capability is critical.
seals for high containment applications, from material process
through to transportation and storage. A wide range of PPE's pharmaceutical material grades include EPDM, Nitrile,
materials are available that are suitable for use with ionising Silicone, FKM and FFKM, which have been specially
radiation and hazardous materials, including industry-accepted developed to withstand steam-in-place (SIP) and clean-in-
EPDM, Nitrile, FKM and Polyurethane grades. place (CIP) procedures within pipework and vessels. In
addition, many of these materials are compliant with the
Marine Diesel, Generator Sets and Power Generation requirements of the Food and Drug Administration (FDA),
PPE is a world-leading supplier of seals for diesel and gas United States Pharmacopeia - Class VI (USP Class VI) and
engines for both marine propulsion and electricity generation 3-A Sanitary Standards.
(gen sets). Our seal designs and high performance materials
continue to be specified on 2 and 4 stroke engines from small Request a copy of our Elastomer Seals for the Food and
to large capacity, where typical life expectancy of >20,000 Phamaceutical Industries brochure or download it from our
hours is required. PPE materials have been developed for website www.prepol.com.
19
Elastomers for specific industries and applications
Elastomers for specific industries and applications
To comply with the requirements of the Standard, the elastomer NES 337 Materials
materials must comply with FDA CFR21.177.2600 and also be Defence Standard 02-337 (NES 337) defines O-ring seals
resistant to steam sterilisation, milk fat, acid and alkali cleaning used on UK Ministry of Defence Surface Ships & Submarines
solutions and chlorine sanitising agents. The PPE elastomers and their associated systems and equipment. Typical system
meeting Classes I, II and III of the 3-A Standard include applications include hydraulics, lubrication systems, fuel
Fluorocarbon (FKM), Silicone, EPDM and Nitrile, allowing systems and pneumatics. PPE offers a complete range of
manufacturers to select the most appropriate elastomer according nitrile and fluorocarbon elastomer materials to meet the
to temperature, chemical and physical performance criteria. requirements of this specification.
21
Elasomer trade names
Elastomer trade names
Chlorosulphonylpolyethylene
CSM (Chlorosulphonated polyethylene)
Hypalon, Noralon L
VMQ
Silicone Silastic, Siloprene, Rhodorsil, Silplus S
PVMQ
ASTM D1418 Standard practice for rubber and rubber lattices nomenclature
* ISO 1629 Rubber and rubber lattices nomenclature
Registered trademark holders:
Perlast - Precision Polymer Engineering. Aflas - Asahi Glass. Baypren, Therban, Polysar Butyl, Perbunan, Krynac, Tornac, Polysar EPDM, Siloprene, Vulkollan, Urepan, Desmopan Bayer. Epcar, Estane,
Hydrin, Hycar BF Goodrich. Breon, Butaclor BP Chemcials. Carom Chemisches Kombinat. Buna Huls, Buna AP, Buna-N Chemische Werke Huls. Elastothane Compounding Ingredients. Epsyn
Copolymer Rubber. Dai-el, Neoflon FEP, Neoflon PFA - Daikin Industries. Noralon Denki Kagugi Chemcial. Pellethane DOW Chemical. Silastic, Silastic LS DOW Corning. Keltan DSM. Neoprene, Hypalon,
Teflon FER, Teflon PFA, Nordel, Vamac, Viton, Kalrez Dupont Performance Elastomers. Fluorel, Fluorel II, BRE Dyneon. Cyanacryl, Europrene, Europrene N, Europrene AR Enichem Elastomeri. Esso Butyl
Esso. Exxon Butyl Exxon Chemical. Solprene Fina Chemicals. Silplus, FSE General Electric. Chemigum, Natsyn, Pliolite, Plioflex Goodyear. Chemraz, Fluoraz Greene Tweed. Herclor Hercules
Chemcial. Denka- JSR. Dutral, Tecnoflon Solvay-Solexis. Noxtite PA Nippon Oil Seal Industry. Butakon Revertex. Rhodorsil Rhone Poulenc. Shell Isoprene Rubber, Cariflex Shell International Chemical.
Skyprene Todo Soda. Royalene, Paracil, Adiprene, Vibrathene Uniroyal Inc. Butacril Was Ugine Kuhlmann. Gechron, Nipol, Nipolar, Zetpol Zeon Chemicals.
The trade names listed above are correct at the time of printing.
22
Chemical compatability guide
Chemical compatibility
This guide is intended to provide assistance in determining the tests, actual field experience and informed judgments.
suitability of various elastomer types in different chemical As laboratory tests do not necessarily predict end-use
environments. The ratings are based on volume swell data performance, it is the users responsibility to ensure
which has been compiled from published literature, laboratory suitability in application.
Rating System
Volume
Rating Description Comments
Change
Volume change (swell) is only an indicator of fluid compatibility and is intended as a typical guideline for comparative purposes. Fluid
attack of the polymer may affect various physical properties, including tensile strength, hardness and elongation. Elevated
temperatures can exacerbate chemical attack on elastomers, therefore in some cases it may be necessary to select special
formulations which offer improved performance. Please contact PPE for technical support and assistance when choosing the right
elastomer for a specific application.
The following chemical compatibility table is available as an shortlisting of the chemicals and finally suggests the most
interactive wizard online at www.prepol.com. Simply select appropriate PPE elastomer grades for the short-listed
the appropriate chemicals from the list and the wizard will chemicals, which can be further sorted and ranked by various
instantly score the various elastomer types against each criteria including temperature, hardness, colour, compression
chemical individually and collectively. The wizard then allows a set, etc.
NOTE: The information given in this guide is provided in good faith and believed to be accurate and reliable. For actual applications,
appropriate testing and validation is mandatory. No representation, guarantee of performance or warranties of any kind are made.
23
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Acetaldehyde 1 3 3 1 2 4 2 3 4 4 3 4 3 3 4 3 2
Acetamide 1 2 4 2 1 1 2 2 1 4 4 4 3 4 2 1 2 1
Acetic acid (dilute) 1 2 2 1 1 1 2 1 2 4 4 2 1 4 2 2 1 1
Acetic acid (glacial) 1 3 3 4 1 2 4 2 2 4 4 2 2 4 2 4 4 2
Acetic acid (hot, high pressure) 1 3 4 4 1 3 4 4 4 4 4 4 2 4 3 4 4 3
Acetic anhydride 1 2 4 2 1 2 4 2 4 4 4 2 4 4 4 4 2 2
Acetic oxide (Acetic anhydride) 1 2 4 2 1 2 4 2 4 4 4 2 4 4 4 4 2 2
Acetone 1 4 3 3 1 1 4 1 4 4 4 4 4 4 4 4 3 4
Acetone cyanohydrin 1 3 2 1 4 1 4 3 4 4
Acetonitrile (Methyl cyanide) 1 1 1 1 1 2 1 2 1
Acetophenone 1 4 4 4 1 1 4 2 4 4 4 4 4 4 4 4 4 4
Acetyl acetone 1 4 4 4 1 1 4 2 4 4 4 4 4 4 4 4 4 4
Acetyl chloride 1 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 3
Acetyl salicylic acid (Aspirin) 1 1 1 4 2
Acetylene (Ethyne) 1 1 2 2 1 1 1 1 1 4 4 2 1 1 1 1 2 2
Acetylene tetrabromide 1 1 4 2 1 1 4 1 4 4 4 4 1 4 4 2 4 4
Acrolein (Acrylaldehyde) 1 1 3 2 1 1 4 2 2 4 4 2 1 4 2 4
Acrylaldehyde 1 1 3 2 1 1 4 2 2 4 4 2 1 4 2 4
Acrylonitrile (Vinyl cyanide) 1 2 3 3 1 4 4 4 4 4 4 3 3 4 4 4 3 4
Adipic acid 1 2 1 1 1 2 2 1 1 4 4 1 1 2 1 1 1 1
Allyl bromide 1 4 4 1 4 4 4 2 4
Allyl chloride 1 4 2 1 2 3 2 4 2 1 4
Alum 1 1 1 1 1 1 1 1 4 1 1 3 1 1 1 1
Aluminium acetate 1 1 3 2 1 1 2 1 2 4 4 1 3 4 2 4 4 4
Aluminium bromide 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1
Aluminium chloride 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 2
Aluminium fluoride 1 1 1 1 1 1 1 1 1 3 2 1 1 1 1 2
Aluminium hydroxide 1 1 2 1 1 2 1 2 1 2 2
Aluminium nitrate 1 1 1 1 1 1 1 1 1 4 3 1 1 4 1 1 1 2
Aluminium phosphate 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Aminobenzene (Aniline) 1 1 4 4 1 2 4 2 4 4 4 4 3 4 4 3 4 4
Aminobutane (Butyl amine) 1 2 3 4 1 3 4 4 3 4 4 4 4 4 4 4 4 3
Aminosalicylic acid 1 1
Ammonia , anhydrous 1 2 4 1 1 1 3 1 2 4 4 4 4 4 2 4 4 2
Ammonia gas, cold 1 1 1 1 1 1 1 1 1 4 3 1 4 4 1 4 1 1
24
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Ammonia gas, hot 1 2 4 2 1 2 4 2 4 4 4 4 4 4 4 4 2 1
Ammonium acetate 1 1 1 2 1 1 1 1 4 1 1 1
Ammonium bicarbonate 1 1 1 1 1 1 1
Ammonium bifluoride 1 4 1 2 2 2
Ammonium bisulfite 1 1 1 1 3 4 3 3 1 2
Ammonium bromide 1 1 1 1 1 1 1
Ammonium carbonate 1 1 1 1 1 1 2 1 4 4 4 1 2 4 4 3 1 2
Ammonium chloride 1 1 1 1 1 1 1 1 1 3 3 2 1 2 1 2 1 3
Ammonium cupric sulfate 1 1 1 1 1 3 1 1 1
Ammonium dichromate 1 1 1 1 1 1 3 1
Ammonium fluoride 1 1 1 2 1 1 1 1 2 1 1
Ammonium fluosilicate 1 1
Ammonium hydrogen fluoride 1 4 1 2 2 2
Ammonium hydroxide, 3 molar 1 1 2 1 1 1 2 1 2 4 4 2 2 1 2 2 1 1
Ammonium hydroxide, conc. 1 1 3 2 1 1 2 1 4 4 4 3 2 4 4 3 1 1
Ammonium iodide 1 1 1 1 1 1 1 1
Ammonium nitrate 1 1 1 1 1 1 2 1 1 4 4 3 2 3 1 3 1 3
Ammonium nitrite 1 1 1 1 1 1 2 1 1 4 4 1 3 4 1 3 1 2
Ammonium oxalate 1 1 1 1 3 1 1 3 1 2
Ammonium perchlorate 1 4 1 1 1 3 4 1 3 3 1 1 2
Ammonium persulfate 1 1 4 1 1 1 2 1 4 4 4 3 3 4 4 4 1 1
Ammonium phosphate 1 1 1 1 1 2 1 1 4 4 1 4 4 1 4 1 1
Ammonium salts 1 1 1 1 1 1 1 1 3 1 3 1 3 1 1
Ammonium sulfate 1 1 2 1 1 1 2 1 1 4 4 1 4 4 1 4 1 1
Ammonium sulfide 1 1 2 1 1 1 2 1 3 4 4 3 4 4 3 4 1 1
Ammonium sulfite 1 1 1 1 1 1 1 1
Ammonium thiocyanate 1 1 1 1 1 1 1
Ammonium thiosulfate 1 1 1 1 1 1 1 1 1 1 1
Amyl acetate 1 3 4 4 1 1 4 1 4 4 4 4 4 4 4 4 4 4
Amyl alcohol (Pentanol) 1 1 2 2 1 1 1 1 2 4 4 2 2 3 2 1 2 4
Amyl amine 1 2 1 1 2 2 3
Amyl borate 1 1 4 2 1 4 4 1 4 1 1 1
Amyl chloride (Chloropentane) 1 1 4 4 1 4 4 3 4 2 1 2 2 4 4
Amyl chloronaphthalene 1 2 4 4 1 4 4 4 3 4 4 1 4 4 2 4 4
Amyl naphthalene 1 2 4 4 1 4 4 4 3 4 4 1 2 4 2 4 4
Amyl nitrate 1 4 1 1 1 1 2 4 1 1 3 2 1 2
Amyl phenol 1 4 1 4 4 4 1 4
Aniline (Aminobenzene) 1 1 4 4 1 2 4 2 4 4 4 4 3 4 4 3 4 4
Aniline dyes 1 1 2 2 1 2 4 2 4 4 4 3 2 3 4 2 2 3
Aniline hydrochloride 1 1 3 4 1 3 4 2 3 4 4 3 2 4 2 2 4 3
Aniline oil 1 2 4 4 1 2 4 2 4 4 4 3 3 4 4 3 4 4
Aniline sulfate 1 4 1 1 3 4 1 3 1 2
Animal oils & fats 1 1 4 2 1 2 1 2 1 1 2 4 1 1 1 1 3 2
Anisole (Methyl phenyl ether) 1 4 4 1 4 4 3
Anone (Cyclohexanone) 1 3 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
25
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Anthraquinone 1 1 1 1 1 2 4 2 1
Antifreeze 1 1 1 1 1 1 2 1 2 4 4 2 1 1 2 1 1 1
Antimony pentachloride 1 4 1 4 4 4 4
Antimony trichloride 1 2 2 1 2 2 1 2 2 2
Aqua regia 1 3 4 4 1 3 4 4 4 4 4 4 2 4 4 3 4 4
Argon 1 1 4 4 1 1 1 2 3 1 1 4 1 1 2 2 4 2
Aromatic fuels 1 2 4 4 1 4 4 2 4 4 4 1 4 2 2 4 4
Arsenic acid 1 1 1 1 1 1 1 1 2 3 3 2 1 4 1 1 1 1
Arsenic trichloride 1 4 1 1 3 4 2 4 4 2 4
Ascorbic acid 1 4 1 1 3 4 1 1 3 1 2
Askarel 1 1 4 4 1 4 4 2 4 4 4 1 4 2 2 4 4
Asphalt 1 4 2 1 4 1 4 2 2 2 4 1 1 2 4 4
ASTM fluid 101 1 4 4 1 4 3 4 3 4 4 4 1 4 4 1 4 4
ASTM fuel A (aliphatic) 1 3 4 2 1 4 1 4 1 2 1 4 1 1 1 1 2 4
ASTM fuel B (30% aromatic) 1 4 4 4 1 4 2 4 1 4 2 4 1 3 1 1 4 4
Barium cyanide 1 1 1 3 1
Barium hydrate 1 1 1 1 1 1 1 1 1 4 4 1 1 1 1 1 1 1
Barium hydroxide 1 1 1 1 1 1 1 1 1 4 4 1 1 3 1 1 1 1
Barium nitrate 1 1 1 1 1 3 1 2
Barium salts 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Barium sulfate 1 1 1 1 1 1 1 1 1 4 1 1 1 4 1 1 1 1
Barium sulfide 1 1 2 1 1 1 1 1 1 4 1 1 1 3 1 1 1 1
Beer 1 1 4 1 1 1 1 2 1 1 1 4 1 1 1
Benzal chloride 1 1 4 4 1 4 4 3 4 3 4 4 1 4 2 4 4
Benzaldehyde 2 2 4 4 1 1 4 1 4 4 4 4 4 4 4 4 4 4
Benzene (Benzol) 1 3 4 4 1 4 4 4 4 4 4 4 1 4 4 1 4 4
Benzene sulfonic acid, 10% 2 4 2 1 4 4 4 4 4 4 4 1 4 4 2 1 4
Benzine (Ligroin) (Nitrobenzine) 1 2 4 2 1 4 1 4 1 1 2 4 1 4 1 1 3 4
Benzochloride 1 1 4 4 1 1 2 4 4 4 1 1 4
Benzoic acid 1 1 4 4 1 4 2 4 4 4 4 4 1 4 4 2 4 4
Benzophenone 1 1 4 4 1 2 4 2 4 4 4 4 1 4 4 1 4 2
Benzoyl chloride 1 1 4 4 1 4 4 4 4 3 4 4 1 4 4 2 4 4
Benzoyl peroxide 1 1 1
Benzyl acetate 1 4 1 2 4 4 4
Benzyl alcohol 1 1 4 2 1 2 4 2 4 4 4 4 1 4 4 2 2 1
26
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Benzyl benzoate 1 2 4 4 1 2 4 2 4 4 4 4 1 4 4 1 4 4
Benzyl chloride (Chlorotoluene) 1 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Benzyl dichloride 1 1 4 4 1 4 4 3 4 3 4 4 1 4 4 2 4 4
Beryllium chloride 1 3 3 1 1 1 3 1 3 1 1 3 3
Beryllium sulfate 1 4 1 1 1 3 4 1 3 3 1 1 2
Biphenyl (Phenylbenzene) 1 2 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Bismuth carbonate 1 1 1 1 1 1 1
Black sulfate liquors (cold) 1 1 2 2 1 2 2 2 4 4 2 1 2 2 2
Blast furnace gas 1 1 4 4 1 4 4 4 4 4 4 1 4 2 4 1
Bleach liquor 1 1 4 3 1 1 2 1 3 4 4 4 1 3 2 2 1 2
Bromine 1 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Bromine pentafluoride 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Bromine trifluoride 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Bromobenzene 1 4 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Bromochloro trifluoroethane 1 1 4 4 1 4 4 4 4 4 4 1 4 2 4 4
Bromochloromethane 1 1 4 4 1 2 2 4 4 2 4 4
Bromoethane (Ethyl bromide) 1 1 3 4 1 4 2 4 2 4 3 4 1 4 2 1 4 4
Bromotoluene 1 4 1 4 4 4 2 4
Bromotrifluoromethane 2 1 1 1 1 1 1 1 1 2 1 1 1 2 1 2 1 4
Bunker oil 1 1 4 4 1 4 4 1 1 2 4 1 1 1 1 4 2
Butadiene 1 4 4 1 4 4 4 4 4 4 4 1 4 4 1 4 4
Butane (Butyl hydride) (LPG) 1 3 3 2 1 4 1 4 1 1 4 4 1 3 1 1 2 4
Butanediol 1 1 2 1 1 1 4 2 1 2
Butanol (Butyl alcohol) 1 1 1 1 1 2 4 2 2 4 4 1 1 1 1 1 1 3
Butene (Butylene) 1 4 3 1 4 1 4 2 4 4 4 1 4 2 2 4 4
Butyl acrylate 1 4 4 4 1 4 4 4 4 4 4 4 4 4 4 4 4 1
Butyl alcohol (Butanol) 1 1 1 1 1 2 4 2 2 4 4 1 1 1 1 1 1 3
Butyl amine (Aminobutane) 1 2 3 4 1 3 4 4 3 4 4 4 4 4 4 4 4 3
Butyl benzoate 1 4 4 1 1 4 1 4 4 4 4 1 4 4 1 4 4
Butyl bromide 1 4 1 4 4 4 2 4
27
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Butyl butyrate 1 4 4 1 1 2 4 4 4 1 1 4
Butyl carbitol 1 2 4 3 1 1 1 1 4 4 4 2 4 4 4 4 4
Butyl cellosolve (Butoxyethanol) 1 3 4 3 1 2 3 2 3 4 4 4 4 4 4 4 4 4
Butyl chloride (Chlorobutane) 1 4 1 3 3 4 2 3 1 4 2
Butyl ether 1 4 4 1 3 4 3 3 4 2 4 4 4 3 4 4
Butylene (Butene) 1 4 3 1 4 1 4 2 4 4 4 1 4 2 2 4 4
Butyraldehyde 2 3 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Butyric acid 1 2 4 4 1 2 4 2 4 4 4 4 2 4 4 4 4 4
Butyric anhydride 1 4 1 3 3 3 2
Butyrone (Dipropyl ketone) 1 4 1 2 4 4 4 4
Cadmium chloride 1 4 1 1 1 1 3 4 1 1 3 3 1 1 2
Cadmium nitrate 1 4 1 1 3 1 1 3 1 1 2
Cadmium sulfate 1 4 1 1 1 3 4 1 3 1 1 2
Calcine liquors 1 1 1 1 1 1 4 4 1 1 1
Calcium acetate 1 1 3 2 1 2 3 1 3 4 4 1 4 4 2 4 4 4
Calcium bisulfate 1 2 1 2 1 1
Calcium bisulfide 1 4 1 1 1 3 4 1 3 1 1 2
Calcium bisulfite 1 1 4 1 1 4 4 4 1 4 3 4 1 4 1 2 1 3
Calcium bromide 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Calcium carbonate 1 1 1 1 1 1 1 1 3 3 1 1 1 1 1 1 1
Calcium chlorate 1 1 1 1 1 1 1 1
Calcium chloride 1 1 1 1 1 1 1 1 1 3 3 1 1 1 1 1 1 1
Calcium cyanide 1 1 1 1 1 1 2 1 1 4 4 1 1 2 1 1 1 1
Calcium hydrosulfide 1 1 1 1 1 1 1 1
Calcium hydroxide 1 1 1 1 1 1 1 1 1 4 4 1 1 3 1 1 1 3
Calcium hypochloride 1 1 4 4 1 1 2 1 4 4 4 4 1 4 1 1 3
Calcium hypochlorite 1 1 3 3 1 1 2 1 3 4 4 3 1 4 2 2 1 2
Calcium nitrate 1 1 1 1 1 1 1 1 1 3 3 1 1 2 1 1 1 2
Calcium oxichloride 1 1 4 3 1 2 2 2 2 4 4 2 1 2 2 2 2
Calcium oxide 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Calcium permanganate 1 1 1 1
Calcium phosphate 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1
Calcium salts 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2
Calcium silicate 1 1 1 1 1 1 1 1 1 1 1 1
Calcium sulfate (Gypsum) 1 1 1 1 1 1 1 1 1 1 1 1
Calcium sulfhydrate 1 1 1 1 1 1 1 1 1
Calcium sulfide 1 1 2 1 1 1 2 1 2 4 1 2 1 4 1 1 1 2
Calcium sulfite 1 1 2 1 1 1 1 1 4 1 2 1 1 1 1 1
Calcium thiosulfate 1 1 2 1 1 1 2 1 2 4 3 2 1 2 2 1 1 1
Caliche liquors 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2
28
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Camphor 1 4 2 1 4 4 1 4 2 4
Cane sugar liquor 1 1 1 1 1 1 1 1 2 4 4 1 1 1 2 1 1 1
Capric acid (Caproic acid) 1 2 2 2 1 4 1 1 4 1 1 1 2 2
Caproic aldehyde 1 4 1 1 2 2 4 4 4 2 4 4 2
Capryl alcohol (Octanol) 1 1 2 2 1 1 2 2 2 4 4 2 1 2 2 2 2 2
Carbamate 1 4 2 1 2 2 3 4 4 4 1 4 1 2
Carbinol (Methanol) 1 1 1 1 1 1 2 1 2 4 4 1 1 1 1 2 1 2
Carbitol 1 2 2 2 1 2 2 2 4 4 2 2 4 2 2 2
Carbolic acid (Phenol) 1 1 4 4 1 2 4 2 4 4 4 4 1 4 4 1 4 4
Carbon bisulfide 1 1 4 4 1 4 4 4 4 3 4 4 1 4 2 1 4 3
Carbonic acid 1 1 2 1 1 1 1 1 2 3 3 1 1 1 2 1 1 1
Castor oil 1 1 2 1 1 2 1 2 1 1 1 2 1 2 1 1 1 1
Caustic potash 1 2 2 2 1 1 2 1 2 4 2 2 2 4 2 2 3
Caustic soda 1 1 2 2 1 1 2 1 2 4 2 2 2 2 2 3
Cellosolve 1 1 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Cellosolve, acetate 1 3 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Cellosolve, butyl 1 2 4 3 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Cellosolve, methyl 1 2 4 3 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Cellulose acetate (CA) 1 3 4 1 2 4 4 4 4
Cetane (Hexadecane) 1 1 4 2 1 4 4 1 1 4 4 1 1 3 2 4
Cetyl alcohol 1 1 1 4 1 1 1 2 2
China Wood oil (Tung oil) 1 1 4 2 1 4 3 1 1 3 4 1 2 1 2 3 4
Chloral hydrate 2 3 3 1 3 3 4 4 3 2
Chloramine-T 1 1 1 1 1 1 1 1 1 1
Chlordane 1 1 4 3 1 4 4 2 4 1 2 2 3 4
Chlorextol 1 1 4 2 1 4 4 2 2 4 4 1 2 2 4 4
Chloric acid 1 4 4 1 1 2 4 4 1 1
Chlorinated brine 1 1 4 4 1 4 4 4 4 4 2 1 4 1 2 4
Chlorinated lime 1 1 4 3 1 2 2 2 2 4 4 2 1 2 2 2 2
Chlorinated solvents 1 4 4 4 1 4 4 4 4 4 4 1 4 1 4 4
Chlorine dioxide 1 3 4 4 1 3 4 3 4 4 4 4 2 4 4 2 3 3
Chlorine trifluoride 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Chlorine, dry 1 3 4 4 1 4 2 4 4 4 4 4 1 4 3 1 4 4
Chlorine, wet 1 3 4 3 1 4 3 4 4 4 4 4 1 4 3 2 3 3
Chloroacetic acid 1 2 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 3
Chloroacetone 1 4 4 4 1 1 4 2 4 4 4 4 4 4 4 4 4 4
Chlorobenzene 1 2 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Chlorobromomethane 1 3 4 4 1 2 4 2 4 4 4 4 1 4 4 2 4 4
Chlorobutadiene (Chloroprene) 1 2 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Chlorobutane (Butyl chloride) 1 4 1 3 4 4 2 4
29
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Chlorodifluoromethane 1 1 2 1 1 1 1 1 4 2 4 2 4 4 4 1 4
Chlorodiphenyl 4 4 4 4 1 4
Chlorododecane 1 2 4 4 1 4 4 4 4 4 4 1 4 1 4 4
Chloroethylene (Vinyl chloride) 1 2 4 4 1 3 4 3 4 4 4 4 1 4 4 2 4 4
Chloroform 1 4 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Chloronaphthalene 1 4 4 4 1 4 4 4 4 1 2 4 4
Chloronitroethane 4 4 4 4 4 4 3 4
Chloropentafluoroethane 1 1 1 1 1 1 1 1 1 2 1 2 1 1 3 1 3
Chloropentane (Amyl chloride) 1 4 4 1 4 4 4 4 4 2 2 4 4
Chloroprene (Chlorobutadiene) 1 2 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Chlorosulfonic acid 1 1 4 4 1 4 4 4 4 4 4 4 4 4 4 4 4 4
Chlorothene (Trichloroethane) 1 2 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Chlorotoluene (Benzyl chloride) 1 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Chlorotrifluoroethylene (CTFE) 2 1 4
Chlorotrifluoromethane 2 1 2 1 1 1 1 1 1 2 4 2 3 1 1 3 1 4
Chlorox 1 1 4 2 1 2 1 2 2 3 3 3 1 3 2 1 2 2
Chrome plating solution 1 1 4 4 1 2 2 4 4 4 4 1 4 4 2 4 2
Chromic acid, 50% 1 1 4 4 1 2 3 3 4 4 4 4 1 4 4 3 2 3
Chromic oxide (aqueous) 1 1 4 4 1 2 2 4 4 4 4 1 4 2 1 2
Chromium sulfate 1 2 1 2 2 1 2
Citric acid 1 1 1 1 1 1 1 1 1 3 3 1 1 1 1 1 1 1
Cobalt chloride 1 1 1 1 1 1 2 1 1 3 3 1 1 2 1 1 1 2
Coconut oil 1 1 4 3 1 3 1 3 1 1 3 4 1 1 1 1 3 1
Cod liver oil 1 1 4 2 1 1 1 1 1 1 1 4 1 3 1 1 2 2
Coffee 1 1 1 1 1 1 4 1 2 4 4 3 1 3 2 1 1 1
Copper chloride 1 1 1 2 1 1 2 1 1 3 3 3 1 2 1 1 2 1
Copper cyanide 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Copper salts 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Copper sulfate, 10% 1 1 2 1 1 1 2 2 1 4 3 3 1 2 1 1 1 1
Copper sulfate, 50% 1 1 2 1 1 1 2 1 4 3 2 1 4 1 1 1 1
Copper sulfide 1 1 1 1 1 3 1 1
Corn oil 1 1 4 3 1 3 1 3 1 1 1 4 1 1 1 1 3 1
Cottonseed oil 1 1 4 3 1 3 1 3 1 1 1 4 1 1 1 1 3 1
Creosote (coal tar) 1 1 4 2 1 4 4 4 1 1 3 4 1 3 1 1 4 4
Creosote (wood tar) 1 1 4 2 1 4 4 4 1 1 3 4 1 4 2 1 4 4
30
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Cupric chloride (Copper chloride) 1 1 1 2 1 1 2 1 1 3 3 3 1 2 1 1 2 1
Cutting oil 1 1 4 2 1 4 4 1 1 1 4 1 1 1 1 2 4
Cyclohexane 1 2 4 3 1 4 1 4 1 2 1 4 1 2 1 1 4 4
Cyclohexanol 1 1 4 2 1 4 4 4 2 4 4 4 1 3 2 1 3 4
Cyclohexanone 1 3 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Cyclopentane 1 4 1 1 4 4 4 4 4 1 4
Cymene (Isopropyltoluene) 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Decahydronaphthalene 1 4 4 1 4 4 3 4 4 4 4 1 4 4 2 4 4
Decalin 1 4 4 1 4 4 3 4 4 4 4 1 4 4 2 4 4
Decanal 1 4 1 4 1 4 4 4 4
Decane 1 1 4 3 1 4 1 4 1 1 2 4 1 3 1 1 3 2
Decanol (Decyl alcohol) 1 1 4 1 1 1 1 2 1
Denatured alcohol 1 1 1 1 1 1 1 1 2 4 4 1 1 2 2 1 1 1
Detergent solution 1 1 2 2 1 1 2 1 1 4 4 2 1 3 1 1 2 1
Developing fluid (photographic) 1 1 2 1 1 2 2 1 1 1 1 1 1 1
Dextron 1 1 4 2 1 4 4 1 1 2 4 1 1 1 2 4 4
Dextrose 1 1 1 1 1 1 1 1 1 4 4 1 1 1 1 1 1 1
Diacetone (Diacetone alcohol) 1 4 4 4 1 1 4 1 4 4 4 4 4 4 4 4 4 4
Diazinon 1 4 3 1 4 4 3 4 2 2 3 4
Dibenzyl ether 1 3 4 4 1 2 4 2 4 4 3 4 4 4 4 2 4 2
Dibenzyl sebacate 1 2 4 4 1 2 2 4 4 2 4 2 4 4 3 4 3
Dibromoethyl benzene 1 3 4 4 1 4 2 4 4 4 4 4 2 4 4 2 4 4
Dibutyl amine 1 2 4 3 1 4 4 4 4 4 4 4 4 4 4 4 4 3
Dibutyl ether 1 4 4 4 1 3 4 3 4 3 2 4 3 4 4 3 4 4
Dibutyl phthalate (DBP) 1 2 4 4 1 2 2 3 4 4 3 4 3 4 4 3 4 2
Dichlorodifluoromethane 1 2 1 1 1 2 1 2 1 1 2 2 2 1 1 2 1 4
Dichloroethyl ether 1 4 1 4 4 4 4 4
Dichloroethylene 1 4 4 1 4 4 4 4 2 3 4
Dichlorofluoromethane 2 4 2 1 4 2 4 4 4 4 4 4 4 4 4 4 4
Dichlorotetrafluoroethane 2 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 4
Dicyclohexylamine 1 3 4 4 1 4 4 4 3 4 4 4 4 4 3 4 4 4
Diesel oil 1 1 4 3 1 4 1 4 1 1 3 4 1 2 1 1 4 4
Diester synthetic lubricant 1 1 4 4 1 4 4 2 2 4 4 1 2 2 4 4
Diethanol amine (DEA) 1 2 1 1 1 1 2 4 1 2 3 2 1 2 2
Diethyl amine 1 3 3 1 3 4 3 3 4 3 3 4 4 3 4 3 3
Diethyl benzene 1 4 4 1 4 4 4 4 4 1 2 4 4
Diethyl carbonate 1 4 1 4
Diethyl ether 1 4 4 3 1 3 3 4 3 3 3 4 3 4 3 3 4 4
Diethyl phthalate (DEP) 1 4 4 1 1 4 4 3 4
Diethyl sebacate 1 2 4 4 1 3 2 3 4 4 4 2 4 3 2 4 2
31
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Diethylene ether (Dioxane) 1 4 4 4 1 2 4 2 4 4 4 4 4 4 3 4 4 4
Diethylene glycol (Digol) 1 1 3 1 1 1 2 1 1 4 4 2 1 2 1 1 1 2
Diethylene triamine 1 1 2
Difluorodibromomethane 1 4 4 1 2 2 4 4 4 4 4 4 4
Diisobutyl ketone 1 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Diisobutylene 1 4 4 1 4 2 4 2 4 4 4 1 4 3 3 4 4
Diisodecyl adipate (DIDA) 1 4 1 1 4 4 3 4
Diisodecyl phthalate (DIDP) 1 4 4 1 1 1 4 4 3 4
Diisooctyl adipate (DIOA) 1 4 1 1 4 4 3 4
Diisooctyl phthalate (DIOP) 1 4 1 1 4 4 3 4
Dimethyl aniline 1 4 4 1 3 4 3 3 4 4 4 4 4 4 4 4 4
Dimethyl ether 1 4 4 3 1 3 4 3 2 4 4 4 2 4 1 4 1
Dimethyl formamide (DMF) 1 1 4 4 1 3 4 3 2 4 4 4 4 4 2 4 4 2
Dimethyl ketone (Acetone) 1 4 3 3 1 1 4 1 4 4 4 4 4 4 4 4 3 4
Dimethyl phthalate 1 2 4 4 1 2 4 2 4 4 4 4 2 4 4 2 4 1
Dimethyl sulfate 4 1 3 4 4 2 4
Dimethyl sulfide 1 4 1 4 3 1 4 4 1 1 4 2
Dinitrotoluene (DNT) 1 4 4 4 1 4 4 4 4 4 4 3 4 4 4 4 4
Dioctyl phthalate (DOP) 1 2 4 4 1 2 3 2 3 4 3 4 2 3 3 2 4 3
Dioctyl sebacate 1 1 4 4 1 2 3 2 4 4 2 4 2 4 4 3 4 3
Dioxane 1 4 4 4 1 2 4 2 4 4 4 4 4 4 3 4 4 4
Dioxolane 1 4 4 4 1 2 4 3 4 4 4 4 4 4 4 4 4 4
Dipentene (Limonene) 1 3 4 4 1 4 4 4 2 4 4 4 1 4 2 3 4 4
Diphenyl (Phenylbenzene) 1 2 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Diphenyl oxide (Phenyl ether) 1 2 4 4 1 4 4 4 4 4 4 4 1 3 4 2 4 3
Drinking water 1 1 2 1 1 1 2 1 1 4 4 1 1 1 1 1 1
Dry cleaning fluids 2 3 4 4 1 4 4 4 3 4 4 4 1 4 3 2 4 4
DTE light oil 1 1 4 2 1 4 4 1 1 2 4 1 2 1 1 4 4
Epichlorohydrin 2 4 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Epoxy resin 1 2 1 1 1 1 1 3 4 3
Epsom salts 1 1 2 2 1 1 2 1 1 4 4 2 1 2 1 1 1 1
Ethanal (Acetaldehyde) 1 3 3 1 2 4 2 3 4 4 3 4 3 3 4 3 2
Ethane 1 4 2 1 4 1 4 1 1 3 4 1 2 1 2 2 4
Ethanethiol (Ethyl mercaptan) 1 1 4 3 1 3 4 4 4 4 4 4 1 4 4 3 2 3
Ethanol 1 1 1 1 1 1 2 1 2 4 4 1 1 2 2 1 1 1
32
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Ethanol amine 1 1 2 2 1 2 2 2 2 4 3 2 4 4 2 4 3 2
Ether 1 4 4 3 1 3 3 4 3 3 3 4 3 4 3 3 4 4
Ethyl acetate 1 4 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 2
Ethyl acetoacetate 1 3 4 1 2 4 2 4 4 4 3 4 4 4 4 4 2
Ethyl acrylate 1 3 4 3 1 3 4 2 4 4 4 4 4 4 4 4 4 2
Ethyl benzoate 1 3 3 4 1 4 4 4 4 4 4 4 1 4 4 1 4 4
Ethyl bromide (Bromoethane) 1 1 3 4 1 4 2 4 2 4 3 4 1 4 2 1 4 4
Ethyl butyl acetate 1 4 1 2 4 4 4 4
Ethyl butyl alcohol 1 1 2 1 3 2 1 4 4 1 1 1 2 2
Ethyl butyl ketone 1 4 1 2 4 4 4 4
Ethyl butyraldehyde 1 4 1 1 4 4 4 4
Ethyl butyrate 1 4 1 4 4 3
Ethyl cellosolve 1 4 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Ethyl cellulose 1 2 2 1 2 2 2 4 2 2 4 4 4 2 2
Ethyl chloride 1 2 3 2 1 2 2 1 1 3 2 1 1 4 1 1 4 4
Ethyl chlorocarbonate 1 2 4 4 1 4 4 4 4 4 4 1 4 4 2 4 4
Ethyl chloroformate 1 2 4 4 1 4 4 4 4 4 4 1 4 2 4 4
Ethyl cyanide (Propionitrile) 1 1 4 2 1 3 4 2 1 4 4 1 4 1 3 2 4
Ethyl cyclopentane 1 2 4 3 1 4 4 1 2 1 4 1 1 1 4 4
Ethyl ether (Ether) 1 4 4 3 1 3 3 4 3 3 3 4 3 4 3 3 4 4
Ethyl formate 2 2 4 2 1 2 4 2 4 4 4 4 1 4 4 1 2 4
Ethyl hexanol 1 1 2 1 1 1 2 1 1 4 4 2 1 1 1 1 2
Ethyl hexyl acetate 1 4 1 2 4 4 4 4
Ethyl hexyl alcohol 1 1 2 1 1 1 2 1 2 4 4 2 1 1 2 1 2
Ethyl iodide 4 1 1 4 4 4 2 1
Ethylene (Ethene) 1 2 3 3 1 2 1 2 1 1 2 3 1 3 1 1 3 4
Ethylene alcohol 1 1 1 1 1 1 1 1 1 4 3 3 1 1 1 1 1 1
Ethylene bromide 1 4 4 1 4 4 4 4 4 4 1 3 4 4
Ethylene chloride 1 2 4 4 1 4 4 4 4 4 4 4 1 4 4 3 4 4
Ethylene chlorohydrin 1 1 2 2 1 2 4 2 4 4 4 2 1 4 4 2 2 3
Ethylene diamine 2 2 2 1 1 1 1 1 1 4 4 1 4 4 1 4 2 1
Ethylene dibromide 1 4 4 1 4 4 4 4 4 4 1 3 4 4
Ethylene dichloride 1 2 4 4 1 4 4 4 4 4 4 4 1 4 4 3 4 4
Ethylene glycol 1 1 1 1 1 1 2 1 2 4 4 2 1 2 2 1 1 1
Ethylene oxide (ETO) 1 3 4 4 1 3 4 3 4 4 4 4 4 4 4 4 4 4
33
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Ethylene trichloride 1 4 4 4 1 3 4 3 4 4 4 4 1 4 4 3 4 4
Ethyne (Acetylene) 1 1 2 2 1 1 2 1 1 4 4 2 1 1 1 2 2
Fatty acids 1 1 4 2 1 3 3 2 4 1 1 2 3 3
Ferric chloride 1 1 1 2 1 1 1 1 1 3 3 3 1 2 1 1 2 2
Ferric hydroxide 1 2 1 1 2 4 4 2
Ferric nitrate 1 1 2 2 1 1 1 1 1 3 3 3 1 2 1 1 1 2
Ferric sulfate 1 1 2 2 1 1 2 1 1 3 3 3 1 2 1 1 1 1
Ferrous chloride 1 1 1 2 1 1 1 1 1 3 3 3 1 2 1 1 2 2
Ferrous sulfate 1 1 2 2 1 1 1 1 1 3 3 3 1 2 1 1 1 2
Fish oil 1 1 4 3 1 4 1 4 1 1 2 4 1 3 1 1 4 1
Freon 11 2 4 4 4 1 4 3 4 2 4 4 4 2 2 2 4 4
Freon 12 2 4 1 1 1 2 1 2 1 2 2 2 2 1 1 3 1 4
Freon 13 1 1 1 1 1 1 1 1 1 4 4 1 1 1 3 1 4
Freon 13b1 2 2 1 1 1 1 1 1 1 1 2 1 2 1 4
Freon 14 1 1 1 1 1 1 1 1 1 1 1 1 4
Freon 21 2 4 2 1 4 2 4 4 4 4 4 4 4
Freon 22 2 2 1 1 1 1 1 4 2 4 2 4 3 4 4 1 4
Freon 31 2 2 1 1 1 1 4 2 4 4 2
Freon 32 2 4 1 1 1 1 1 1 1 4 1 3 1
Freon 112 (Freon BF) 2 4 4 2 1 4 3 4 2 4 2 4 1 2 3 2 4
Freon 502 3 1 1 1 1 1 2 1 2 2
Freon C316 2 1 1 1 1 1 1 1 1 1
Freon C318 3 4 1 1 1 1 1 1 1 2 1 1
Freon K-142b 3 4 1 1 1 4 1 2 2 2 2 4 1
Freon K-152a 3 1 1 1 1 1 1 1 4 1 3
Freon PCA 3 4 2 1 4 4 1 1 4 2 1 1 4
Freon T-P35 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Freon T-WD602 2 2 2 1 2 1 2 1 3 1 2 2 4
Freon TA 3 3 1 1 1 1 1 1 1 3 1 1 1
Freon TC 2 2 1 1 2 1 1 1 4 1 1 1 4
34
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Freon TMC 2 3 2 1 2 2 2 2 2 1 2 2 3
Fuel oil 1 1 4 3 1 4 1 4 1 1 3 4 1* 2 1 1 4 4
Fumaric acid 1 1 2 2 1 2 4 1 4 1 1 4 1 1 2 2
Furan (Furfuran) 1 4 4 1 3 4 3 4 4 4 4 4 4 4 4 4 4
Furfural (Furfuraldehyde) 2 3 4 4 1 2 4 2 4 4 4 4 4 4 3 4 4 4
Furfuryl alcohol 1 2 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Gallic acid 1 1 2 3 1 2 2 2 4 4 1 1 4 2 1 2 3
Gasohol 1 4 4 1 4 4 4 3 4 4 4 1 4 4 2 4 4
Gasoline 1 3 4 4 1 4 1 4 2 4 3 4 1 3 3 1 4 4
Gelatin 1 1 1 1 1 1 1 1 1 4 4 1 1 3 1 1 1 1
Glauber's salt 1 1 4 2 1 2 1 2 4 4 2 1 1 4 1 2
Gluconic acid 1 4 1 1 1 3 3 1 4 1 3 1 2 2
Glucose 1 1 1 1 1 1 1 1 1 4 4 1 1 1 1 1 1 1
Glycerine (Glycerol) 1 1 1 1 1 2 1 1 1 3 4 1 1 1 1 1 1 1
Glycine 1 2 1 1 1 1 2 2 1 2
Glycol 1 1 1 1 1 1 2 1 2 4 4 2 1 1 2 1 1 1
Glycolic acid 1 1 2 1 2 1 1 2 1 1 1 1
Glycolmonoethylether 1 3 2 1 4 1 1 3 1
Grease (petroleum base) 1 1 4 2 1 4 2 4 1 1 1 4 1 1 1 1 4 4
Green Sulfate liquor 2 1 2 2 1 1 1 1 2 4 2 2 1 2 2 2 4
Halothane 2 1 4 4 1 4 4 4 4 4 4 1 4 2 4 4
Halowax oil 2 1 4 4 1 4 4 4 4 4 4 1 1 4 1 4 4
Heavy water 1 1 1 2 1 1 1 1 4 4 1 1 1 1 1 1
HEF-2 (high energy fuel) 1 1 4 4 1 4 4 2 3 3 3 1 2 2 4 4
Helium 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Heptanal 1 4 1 1 4 4 2 4
Heptane 1 3 4 2 1 4 1 4 1 1 2 4 1 1 1 1 2 4
Hexachlorobutadiene 1 4 4 1 4 4 1 4 4 1 4 4
Hexadecane (Cetane) 1 1 4 2 1 4 4 1 1 4 4 1 1 3 2 4
Hexalin (Cyclohexanol) 1 1 4 2 1 4 4 4 2 4 4 4 1 3 2 1 3 4
Hexamine 1 1 1
Hexane (n-Hexane) 1 3 4 2 1 4 1 4 1 1 1 4 1 2 2 1 2 4
Hexanedioic acid (Adipic acid) 1 2 1 1 1 2 2 1 1 4 4 1 1 2 1 1 1 1
Hexanol 1 2 2 1 3 2 2 2 4 4 2 1 1 2 1 2 3
Hexone (MIBK) 1 4 4 4 1 3 4 3 4 4 4 4 4 4 4 4 4 4
Hexyl alcohol 1 2 2 1 3 2 2 2 4 4 2 1 1 2 1 2 3
Hexylene (n-Hexene) 1 3 4 2 1 4 2 4 2 1 2 4 1 3 2 1 2 4
Hexylene glycol (Brake fluid) 1 4 1 1 1 3 4 1 1 3 3 1 2
Hydraulic oil (petroleum base) 1 1 4 2 1 4 1 4 1 1 1 4 1 1 1 1 2 2
Hydrazine (Diamine) 2 2 2 2 1 1 1 2 4 4 4 2 2
Hydrazine, anhydrous 2 2 1 2 1 2 4 2 4 4 4 4 4 1 1 4 2
Hydrobromic acid 1 1 4 3 1 1 4 1 4 4 4 1 1 4 4 3 1 4
Hydrochloric acid, 3 molar 1 1 3 3 1 1 4 1 3 3 4 3 1 3 2 2 4
Hydrochloric acid, 37% (cold) 1 1 3 3 1 2 4 2 3 4 4 2 1 3 3 2 2 4
Hydrochloric acid, 37% (hot) 1 1 4 4 1 3 3 3 4 4 4 3 1 3 3 3 4 4
35
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Hydrochloric acid, concentrated 1 1 4 4 1 2 4 3 4 4 4 4 1 4 3 3 4 4
Hydrocyanic acid 1 1 2 2 1 1 2 1 2 4 4 2 1 3 2 2 1 3
Hydrofluoric acid, concentrated 1 2 3 3 1 3 4 2 4 3 4 3 2 4 4 4 2 4
Hydrofluosilicic acid 1 1 2 2 1 1 1 2 4 1 1 2 4 1 4
Hydrogen bromide 1 2 4 3 1 2 4 1 4 4 4 2 2 4 3 1 4
Hydrogen chloride 1 1 2 4 1 1 1 4 2 1 1
Hydrogen fluoride (HF) 1 2 4 4 1 4 4 4 4 4 4 4 2 4 4 4 3 4
Hydrogen fluoride, anhydrous 1 2 4 4 1 2 4 3 4 4 4 4 3 4 4 4 3 4
Hydrogen gas 1 1 2 1 1 1 1 1 1 2 1 2 1 1 1 3 1 3
Hydrogen peroxide, 30% 1 1 2 1 1 1 1 1 2 4 4 2 1 4 2 1 2 1
Hypochlorous acid 1 4 4 1 2 2 2 4 4 2 3 4 3
Iodine 1 2 2 4 1 2 2 2 2 4 4 4 1 2 1 1 2 3
Iodine pentafluoride 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Iodoform 1 4 4 1 4 1 3 4 4 2 3 2
Iso-butane 1 4 2 1 4 4 1 1 4 4 1 1 1 4 2
Iso-octane 1 2 4 3 1 4 1 4 1 1 2 4 1 1 1 1 2 4
Isoamyl acetate 1 4 4 4 1 2 2 4 4 1 4 4 3 1 4 2
Isoamyl alcohol 1 1 1 1 1 1 1 1 1 1 1
Isoamyl butyrate 1 4 4 4 1 2 2 4 4 1 4 4 3 1 4 2
Isoamyl chloride 1 4 4 1 4 3 4 4 2 4
Isopentane 1 4 2 1 4 4 1 1 4 4 1 1 1 3 2
Isophorone (Ketone) 1 2 4 4 1 1 4 1 4 4 4 4 4 4 4 4 4 4
Isopropanol (Isopropyl alcohol) 1 1 2 2 1 1 2 1 2 4 4 1 1 3 2 2 1 1
Isopropyl acetate 1 4 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Isopropyl alcohol (IPA) 1 1 2 2 1 1 2 1 2 4 4 1 1 3 2 2 1 1
Isopropyl amine 1 2 1 1 2 2 4 3
Isopropyl benzene 1 3 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Isopropyl chloride 1 4 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Isopropyl ether 1 4 4 3 1 4 4 4 3 3 3 4 4 4 3 3 3 4
Isopropyl toluene (Cymene) 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Kel F liquids 2 3 1 1 1 1 1 2 2 1 1
Kerosene (Kerosine) 1 2 4 3 1 4 2 4 1 2 1 4 1 2 2 1 3 4
Lacquer solvents 1 4 4 4 1 4 4 4 4 4 4 4 4 4 4 4 4 4
Lacquers 1 4 4 4 1 4 4 4 4 4 4 4 4 4 4 4 4 4
Lactams (Amino acids) 1 3 4 2 1 2 2 4 4 4 4 4 2
36
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Lactic acid (cold) 1 1 1 1 1 1 1 1 4 1 1 1 4 1 1 1 2
Lactic acid (hot) 1 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 3 2
Lard 1 1 4 2 1 2 1 2 1 1 2 4 1 1 1 1 3 2
Lauryl alcohol (n-Dodecanol) 1 1 1 1 2 1 1 1 2 2
Lavender oil 1 1 4 4 1 4 3 4 2 2 4 4 1 4 3 2 4 4
Lead acetate 1 4 4 2 1 1 2 1 3 4 4 2 4 4 2 4 4 4
Lead chloride 1 4 2 1 1 3 4 1 1 3 3 1 1 2
Lead chromate 1 4 2 1 1 1 3 4 1 1 3 3 1 1 2
Lead nitrate 1 2 1 1 1 1 2 1 1 4 4 1 1 2 1 1 2 4
Lead sulfamate 1 2 1 1 1 1 2 4 2 1 4 1 1 2
Light grease 1 2 4 4 1 4 1 4 1 1 1 4 1 1 1 1 4 4
Ligroin (Nitrobenzine) 1 2 4 2 1 4 1 4 1 1 2 4 1 4 1 1 3 4
Lime bleach 1 1 2 2 1 1 2 1 1 4 4 2 1 2 1 1 2 2
Lime sulfur 1 1 4 1 1 1 1 4 4 4 1 1 1 1 1
Limonene (Dipentene) 1 3 4 4 1 4 4 4 2 4 4 4 1 4 2 3 4 4
Liquimoly 1 1 4 2 1 4 4 1 1 2 4 1 1 1 4 4
Lithium bromide 1 1 1 2 1 1 1 1 1 2 1 1 1 1
Lithium chloride 1 1 1 2 1 1 1 1 1 2 1 1 1 1
Lithium hydroxide 1 4 1 1 1 3 4 3 3 1 1 2
Lithophone 1 4 1 1 1 3 4 1 1 3 3 1 2
Magnesium hydroxide 1 1 2 2 1 1 1 1 2 4 4 2 1 1 2 2 1 3
Magnesium salts 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Magnesium sulfate 1 1 2 2 1 1 2 1 1 4 4 2 1 2 1 1 1 1
Malathion 1 4 3 1 4 4 2 4 1 2 4
Maleic acid 1 1 4 4 1 4 4 4 4 3 4 1 1 4 4 3
Maleic anhydride 1 1 4 4 1 4 4 4 4 4 1 4 4 4
Malic acid (Apple acid) 1 1 2 2 1 4 4 1 4 1 1 1 1 1 2 2
Managanese (II) chloride 1 4 1 1 1 1 4 3 3 1 1
Manganese carbonate 1 4 1 1 1 1 1 4 1 3 3 1 1 2
Manganese sulfate 1 1 1 1 1 3 1 1
Mercuric chloride 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 3
Mercuric cyanide 1 1 2 1 1 2 1
Mercurous nitrate 1 1 2 1 1 2 1
Mercury 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2
Mesityl oxide 1 4 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
37
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Methacrylacid methylester 1 4 4 1 2 2 4 4 4 4 4 4 4
Methacrylic acid 1 2 2 1 2 4 3 4 4 4
Methane 1 2 4 2 1 4 1 4 1 1 3 4 1 2 1 2 2 4
Methanol (Methyl alcohol) 1 1 1 1 1 1 2 1 2 4 4 1 1 1 1 2 1 2
Methyl acetate 1 4 4 3 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Methyl acetoacetate 1 4 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 3
Methyl acrylate 1 4 4 2 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Methyl acrylic acid (Crotonic acid) 1 4 2 1 2 2 4 4 4 4 3 4 4 4 4
Methyl alcohol (Methanol) 1 1 1 1 1 1 2 1 2 4 4 1 1 1 1 2 1 2
Methyl amine 1 2 2 1 2 1 4 2 2 1
Methyl butyrate 1 4 1 4 4
Methyl carbonate 1 1 4 4 1 4 4 4 4 4 4 1 4 2 4 4
Methyl cellosolve 1 1 4 3 1 2 4 2 3 4 4 4 4 4 4 4 4 4
Methyl cellulose 1 1 2 2 1 2 2 2 4 2 2 4 1 2 4 2 2
Methyl chloride 1 4 4 4 1 3 4 3 4 4 4 4 2 4 4 2 4 4
Methyl chloroformate 1 1 4 4 1 4 4 4 4 4 4 1 4 2 4 4
Methyl cyanide (Acetonitrile) 1 1 1 1 1 2 1 2 1
Methyl cyclopentane 1 4 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Methyl dichloride 1 4 4 1 3 4 3 4 4 4 4 1 4 2 4 4
Methyl ether 1 4 2 3 1 2 4 2 2 4 4 3 1 4 1 1 4 1
Methylene dichloride 1 2 4 4 1 4 4 4 4 4 4 4 2 3 2 4 4
MIL- spec fluids Contact technical department
Milk 1 1 1 1 1 1 4 1
Mineral oil 1 1 4 2 1 3 1 3 1 1 1 4 1 2 1 1 2 2
Monobromo benzene 1 2 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
38
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Monochloro acetic acid 1 4 4 1 2 4 3 4 4 4 4 4 4 4 4 4 4
Monochloro acetone 1 4 2 1 1 4 2 4 4 4 3 4 4 4 4 3 4
Monochloro benzene 1 4 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Monoethanolamine (MEA) 1 1 2 4 1 2 4 2 4 4 4 2 4 4 4 4 4 2
Monoethylamine (Ethyl amine) 1 3 3 1 1 2 3 3 4 3
Morpholine 1 4 2 1 2 4 2 4 4 4 4 1 4 4 4 2 4
Mustard gas 1 3 3 1 3 1 3 1 1 1 1
n-Dodecanol (Lauryl alcohol) 1 1 1 1 2 1 1 1 2 2
n-Heptane 1 3 4 2 1 4 1 4 1 1 1 4 1 3 2 1 2 4
n-Hexaldehyde 1 4 1 1 1 4 2 4 4 3 4 4 4 4 4 3 2
n-Hexane 1 2 4 2 1 4 1 4 1 1 2 4 1 1 2 1 2 4
n-Hexanol 1 2 2 1 3 2 3 1 4 4 2 1 4 2 2 2 2
n-Hexene (Hexylene) 1 3 4 2 1 4 2 4 2 1 2 4 1 3 2 1 2 4
n-Octane 1 4 4 1 4 2 4 2 4 4 4 1 3 2 2 4 4
n-Pentane 1 3 2 1 4 1 4 1 1 4 4 1 3 1 3 2 4
Neon 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Neville acid 1 1 4 4 1 2 2 4 4 4 1 4 4 2 4 4
Nickel acetate (Diacetate) 1 4 4 2 1 1 3 1 3 4 4 3 4 4 2 4 4 4
Nickel chloride 1 1 2 2 1 1 2 1 1 3 3 3 1 2 1 1 1 1
Nickel nitrate (Dinitrate) 1 1 1 1 1 1 1 1 1 1 1
Nickel salts 1 1 2 2 1 1 2 1 1 3 3 2 1 2 1 1 1 1
Nickel sulfate 1 1 2 2 1 1 2 1 1 4 3 3 1 2 1 1 1 1
Niter cake 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 1
Nitric acid (3 molar) 1 2 4 4 1 2 4 1 4 4 4 4 1 4 3 3 4 4
Nitric acid (concentrated) 1 2 4 4 1 4 4 1 4 4 4 4 1 4 4 3 4 4
39
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Nitrogen tetroxide 1 3 4 4 1 4 4 3 4 4 4 4 4 4 4 4 4 4
Nitromethane 1 3 3 3 1 2 4 2 4 4 4 2 4 4 4 4 2 4
Nitropropane 1 2 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Nitrous acid 1 4 1 1 3 1 3 3 1 2
o-Chloronaphthalene 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Octyl acetate 1 4 1 2 4 4 4 4
Octyl alcohol (Octanol) 1 1 2 2 1 1 2 2 2 4 4 2 1 2 2 2 2 2
Oleic acid 1 1 4 4 1 4 2 4 3 4 3 4 1 4 4 2 4 4
Olein (Triolene) 1 4 4 1 4 2 3 2 4 4 2 3 4
Oleum (fuming sulfuric acid) 1 1 4 4 1 4 4 4 4 4 4 4 1 4 3 4 4 4
Olive oil 1 1 4 2 1 2 2 2 1 1 1 4 1 3 1 1 2 1
Orthochloroethylbenzene 1 4 4 4 4 4 4 4 4 4 1 4 2 4 4
Oxalic acid 1 1 2 2 1 1 3 1 2 4 4 2 1 4 2 1 2 2
Oxygen (100 to 200C) 1 2 4 4 1 4 4 4 4 4 4 4 2 4 3 4 4 2
Oxygen (below 100C) 1 1 4 1 2 1 2 1 2 2 1 2 1 1 1 1 1 1
Paraffins 1 4 1 1 4 1 4 1 1 1 4 1 1 1 1 1 1
Paraldehyde 1 2 1 1 1 4 3 4
Peanut oil 1 1 4 3 1 3 1 3 1 1 2 4 1 2 1 1 3 1
Penicillin 1 1 1 3 1 4
Pentachloroethane (Pentalin) 1 4 4 1 4 4 4 1 4
Pentachlorophenol (PCP) 1 4 1 4 4 1
Pentane (Amyl hydride) 1 4 2 1 4 4 1 1 4 4 1 3 3 4
Pentanol 1 1 2 2 1 1 1 1 2 4 4 2 2 2 2 1 2 4
Pentyl alcohol (Amyl alcohol) 1 1 2 2 1 1 1 1 2 4 4 2 2 2 2 1 2 4
Pentyl amine (Amyl amine) 1 2 1 1 2 2 3
Perchloric acid 1 2 4 2 1 2 3 2 4 4 4 4 1 4 1 2 4
Perchloroethylene (Perchlor) 1 4 4 4 1 4 3 4 3 4 4 4 1 4 3 2 4 4
Petrolatum 1 1 4 2 1 4 1 4 1 1 1 4 1 1 1 1 2 4
Petroleum oil (above 1???) 1 1 4 4 1 4 2 4 4 4 4 4 1 2 2 4 4 4
Petroleum oil (below 1???) 1 1 4 2 1 4 1 4 1 2 2 4 1 1 1 2 2 2
40
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Phenyl ether (Diphenyl oxide) 1 2 4 4 1 4 4 4 4 4 4 4 1 1 4 2 4 3
Phenyl ethyl ether (Phenetole) 1 4 4 4 1 4 4 4 4 4 4 4 4 4 4 4 4 4
Phenyl hydrazine 1 1 2 4 1 4 4 4 4 1 1 4 4 2 4 3
Phenyl methyl ketone 1 4 4 1 1 4 1 4 4 4 4 4 4 4 4 4 4
Phorone 1 4 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Phosgene 1 1 1 1 1 2 2 2
Phosphate esters 1 2 4 4 1 1 1 4 4 4 4 1 4 3 4 4
Phosphoric acid (3 molar) 1 1 2 3 1 1 3 3 4 3 4 2 1 4 2 2 2 2
Phosphoric acid (concentrated) 1 2 3 4 1 2 4 3 4 3 4 3 1 4 3 2 3 3
Phosphorus oxychloride 1 4 1 4
Phosphorus trichloride 1 1 4 4 1 1 4 1 4 4 4 4 1 4 4 1 4 4
Phthalic acid 1 2 2 1 2 1 3 4 2 1
Phthalic anhydride 1 4 1 1 2
Picric acid, H2 1 2 2 2 1 1 4 1 2 4 4 2 1 4 2 2 1 4
Pine oil 1 1 4 3 1 4 2 4 2 4 3 4 1 4 2 1 4 4
Pinene 1 1 4 3 1 4 2 4 2 4 3 4 1 4 2 1 4 4
Piperidine 1 4 4 1 4 4 4 4 4 4 4 4 4 4 4 4 4
Plating solution, chrome 1 1 4 4 1 1 2 4 4 4 4 1 4 4 4 4
Pneumatic service 1 1 4 1 1 1 1 1 1 4 1 4 1 1 1 4 1 4
Potassium acetate 1 1 4 2 1 1 3 1 2 4 4 2 4 4 4 4 4 4
Potassium bicarbonate 1 1 1 1 2 1 4 3 1 1 1 1 2
Potassium bisulfate 1 1 1 2 1 1 1 1 4 1 1 1 1
Potassium bisulfite 1 1 1 1 1 1 1 1 1 1 1 1
Potassium bromide 1 1 1 2 1 1 1 1 4 1 1 1 1
Potassium carbonate (Potash) 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Potassium chlorate 1 1 2 2 1 1 1 4 4 2 1 1
Potassium chloride 1 1 1 1 1 1 2 1 1 3 3 1 1 2 1 1 1 1
Potassium chromate 1 1 2 1 1 1 2 1 1 3 3 2 1 2 1 3 1
Potassium copper cyanide 1 1 1 1 1 1 2 1 1 3 3 1 1 2 1 1 1 1
Potassium cyanide 1 1 1 1 1 1 2 1 1 3 3 1 1 2 1 1 1 1
Potassium dichromate 1 1 2 1 1 1 2 1 1 3 3 1 1 2 1 1 1 1
Potassium ferricyanide 1 2 1 1 1 4 2 1
Potassium ferrocyanide 1 1 1 4 1 4
Potassium fluoride 1 2 1 1 2 1
Potassium hydroxide, 50% 1 1 2 2 1 1 2 1 3 4 4 2 4 4 2 3 1 3
Potassium hypochlorite 1 2 3 1 1 3 3 2 2 3
Potassium iodate 1 4 1 1 3 4 1 3 3 1 2
Potassium iodide 1 1 1 1 1 1 2 1 1 4 4 1 1 2 1 1 1 1
Potassium nitrate 1 1 1 2 1 1 2 1 1 3 3 1 1 2 1 1 1 1
Potassium nitrite 1 1 1 2 1 1 2 1 1 3 3 1 1 2 1 1 1 1
Potassium oxalate 1 4 1 1 1 3 4 1 3 3 1 2
Potassium perchlorate 1 1 3 2 1 1 2 1 2 4 4 3 1 2 1 1 1 1
Potassium permanganate 1 4 2 1 1 2 1 3 4 4 4 1 2 1 1 3 1
Potassium persulfate 1 4 2 1 1 2 1 4 4 4 4 1 2 2 1 1 1
Potassium phosphate 1 1 1 1 1 1 1
41
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Potassium salts 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Potassium silicate 1 1 1 1 1 1 1 1 1 1 1 1
Potassium sulfate 1 1 2 2 1 1 2 1 1 4 3 2 1 3 1 1 2 1
Potassium sulfide 1 1 1 1 1 1 1 1 1 1 1 1
Potassium sulfite 1 1 2 2 1 1 2 1 2 4 4 2 1 2 1 1 1 1
Potassium tartrate 1 1 1 1 3 4 1 1 3 3 1 1 2
Potassium thiocyanate 1 1 1 1 3 4 1 3 3 1
Producer gas 1 1 4 2 1 4 4 1 2 1 4 1 1 1 2 2 2
Propane (LPG) 1 1 4 2 1 4 1 4 1 1 3 4 1 2 1 2 3 4
Propanol (Propyl alcohol) 1 1 1 1 1 1 2 1 2 4 3 1 1 3 1 1 1 2
Propionaldehyde (Propanal) 1 1 1 4 3 4
Propionic acid 1 1 3 1 1 1 3 1
Propionitrile (Ethyl cyanide) 1 1 4 2 1 3 4 2 1 4 4 1 4 1 3 2 4
Propyl acetate (n-Propyl acetate) 1 4 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Propyl alcohol (1-Propanol) 1 1 1 1 1 1 2 1 2 4 3 1 1 3 1 1 1 2
Propyl amine 1 4 4 1 4 4 4 4 4 4 4 4 4 4 4 4 4
Propyl nitrate (n-Propyl nitrate) 1 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Propylene (Propene) 1 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Propylene chlorohydrin 1 4 1 4 4 4 3
Propylene dichloride 1 4 4 1 4 4 4 4 2 4 4
Propylene glycol 1 1 1 2 1 1 1 1 1 1 1
Propylene oxide 1 3 4 4 1 2 4 2 4 4 4 4 3 4 4 4 4 4
Pyridene 1 2 4 4 1 2 4 2 4 4 4 4 3 4 4 4 4 4
Pyrogallol (Pyrogallic acid) 1 3 1 3 3 4 1
Pyrrole (Azole) 1 3 4 1 3 4 4 4 4 4 3 4 4 4 4 4 3
RJ-1 (MIL-F-25576) 1 1 4 2 1 4 1 4 1 1 1 4 1 1 1 1 2 4
Rosin 1 3 1 4 1 4 4 1 1 2 2
Rotenone 1 1 1 1 1 1 1
RP-1 (MIL-F-25576) 1 1 4 2 1 4 1 4 1 1 1 4 1 1 1 1 2 4
Sal ammoniac 1 1 1 1 1 1 1 1 1 3 3 2 1 2 1 2 1 3
Salicylic acid 1 1 2 1 1 1 2 1 1 4 4 2 1 4 1 1 1 1
Sea water (Brine) 1 1 1 2 1 1 2 1 1 4 4 1 1 1 1 1 1 1
Sewage 1 1 1 2 1 1 1 1 4 4 1 1 1 1 1 1 1
Silicate esters 1 1 4 1 1 4 2 4 2 4 3 4 1 4 2 1 2 4
Silicone grease 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 2 3
Silicone oil 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 4
Silicone tetrachloride 2 1 1
Silver bromide 1 4 1 1 1 4 3
Silver chloride 1 4 1 1 1 3 4 1 3 3
Silver cyanide 1 4 1 1 1 4 4 1 1 4
42
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Silver nitrate 1 1 1 1 1 1 3 1 1 3 3 1 1 2 1 1 1 1
Skydrol 500 1 1 4 4 1 1 4 2 4 4 4 4 4 4 4 3 4 3
Skydrol 7000 1 1 4 4 1 1 4 1 4 4 4 4 2 4 4 3 4 3
Soap solutions See Detergent solution
Sodium acetate 1 2 4 2 1 1 3 1 2 3 3 2 4 4 4 4 4 4
Sodium aluminate 1 1 1 1 1 1 1 1 1 1
Sodium arsenite 1 3 4 1 1 3 3 4 3 3 3
Sodium benzoate 1 1 1 1 1 1 2 1 1 4 4 1 1 1 1 1 1 1
Sodium bicarbonate (Baking soda) 1 1 1 1 1 1 2 1 1 4 4 1 1 1 1 1 1 1
Sodium bichromate 1 1 1 1 1 1 2 1 1 4 4 2 1 2 1 1 3 1
Sodium bisulfate 1 1 2 1 1 1 1 1 1 4 2 1 1 1 1 1 1
Sodium bisulfite 1 1 4 1 1 1 2 1 3 2 4 4 1 2 1 1 1 1
Sodium borate (Borax) 1 1 2 4 1 1 1 1 2 3 3 2 1 1 1 2 4 2
Sodium bromate 1 1 4 1 1 3 4 1 1 3 1 2
Sodium bromide 1 1 4 1 1 1 1 3 4 1 1 1 3 1 1 2
Sodium citrate 1 4 1 1 1 3 3 3 1 3
Sodium cyanide 1 1 1 1 1 1 2 1 1 4 4 1 1 2 1 1 1 1
Sodium dichromate 1 1 1 1 1 1 2 1 1 4 4 1 1 2 1 1 1 1
Sodium ethylate 1 4 1 1 1 3 4 3 3 1 3
Sodium ferricyanide 1 4 1 1 1 1 3 4 1 1 3 3 1 1 2
Sodium ferrocyanide 1 4 1 1 1 3 4 1 3 3 1 2
Sodium fluoride (Fluorol) 1 1 1 1 1 1 1
Sodium hydrogen sulfate 1 1 2 1 1 1 1 1 1 4 2 1 1 1 1 1 1
Sodium hydrogen sulfite 1 1 2 1 1 1 1 1 1 4 4 3 1 1 1 1 1 1
Sodium hydroxide (Caustic soda) 1 1 2 2 1 1 2 1 1 4 3 2 3 4 1 2 1 2
Sodium metasilicate 1 1 1 1 1 1
Sodium nitrate 1 1 2 2 1 1 2 1 2 4 4 2 1 2 1 1 1 4
Sodium nitrite 1 1 2 2 1 1 2 1 2 4 4 2 1 2 1 1 1 4
Sodium oleate 1 4 1 1 1 3 4 1 3 3 1 2
Sodium oxalate 1 1 1 1 1 1
Sodium perborate 1 1 3 2 1 1 2 1 2 4 4 3 1 2 1 1 2 2
Sodium perchlorate 1 1
Sodium peroxide 1 1 2 2 1 1 1 2 4 4 2 1 4 2 1 2 4
Sodium persulfate 1 1 1 1 1
Sodium phosphate (Di-basic) 1 1 1 2 1 1 2 1 1 3 3 1 1 2 1 1 1 4
43
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Sodium phosphate (Mono-basic) 1 1 1 2 1 1 2 1 1 3 3 1 1 2 1 1 1 4
Sodium phosphate (Tri-basic) 1 1 1 2 1 1 2 1 1 3 3 1 1 2 1 1 1 3
Sodium pyrophosphate 1 4 1 1 1 3 4 1 3 3 1 2
Sodium salts 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1
Sodium silicate 1 1 1 1 1 1 2 1 1 4 4 1 1 2 1 1 1 1
Sodium sulfate 1 1 3 2 1 1 2 1 1 4 3 2 1 3 1 1 1 1
Sodium sulfide 1 1 2 1 1 1 2 1 2 4 3 2 2 4 1 2 2 2
Sodium sulfite 1 1 2 1 1 1 2 1 1 4 1 2 1 4 1 1 1 1
Sodium tartrate 1 4 1 1 1 3 4 1 3 3 1 2
Sodium tetraborate 1 1 1 1 1 1 1
Sodium thiosulfate 1 1 2 1 1 1 1 1 2 4 3 2 1 2 1 1 1 1
Sour crude oil 2 2 4 4 4 2 4 4
Sour natural gas 1 1 4 4 4 4 2 4 4
Soybean oil 1 1 4 3 1 3 1 3 1 1 2 4 1 3 1 1 3 1
Stannic chloride 1 2 1 3 1 1 2 2 1 4 4 1 1 2 1 1 4 2
Sulfur chloride 1 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 3
Sulfur dioxide (dry) 1 2 2 4 1 1 3 2 4 4 4 3 4 4 3 2 4 2
Sulfur dioxide (wet) 1 2 3 3 1 1 1 4 4 4 4 4 4 3 2 3 2
Sulfur hexafluoride 2 2 4 1 1 1 1 1 2 4 4 4 2 4 2 2 2 2
Sulfur trioxide (dry) 1 2 4 4 1 3 4 3 4 4 4 3 1 4 4 2 4 3
Sulfur, molten 1 1 4 3 1 3 3 4 4 4 4 1 1 3 4 3
Sulfuric acid (3 molar) 1 1 3 3 1 2 2 3 4 2 3 3 1 4 3 3 3 4
Sulfuric acid (concentrated) 1 1 4 4 1 4 4 4 4 4 4 4 1 4 4 4 4 4
Sulfuric acid, fuming 1 2 4 4 1 4 4 4 4 4 4 4 2 4 4 4 4 4
Sulfurous acid 1 1 2 2 1 2 2 2 4 4 2 1 4 2 3 1 4
Sulfuryl chloride 1 2 2 1 2 2 4 2 1 1
Tannic acid 1 1 3 2 1 1 2 2 2 4 3 1 1 4 1 1 2 2
Tar, bituminous 1 1 4 3 1 4 2 4 2 4 3 3 1 3 2 1 4 2
Tartaric acid 1 1 2 2 1 2 2 2 1 4 3 2 1 4 1 1 1 1
Terpineol (Terpilenol) 1 4 4 1 3 2 3 2 4 2 4 1 4 3 1 4 4
44
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
1 = Excellent
Chemical compatibility
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Tertiary butyl alcohol 1 1 2 2 1 2 2 2 2 4 4 2 1 3 2 2 2 2
Tertiary butyl catechol 1 2 3 2 1 2 2 4 4 4 4 1 4 1 2 3
Tertiary butyl mercaptan 1 1 4 4 1 4 4 4 4 4 4 1 4 4 4 4
Tetrabromoethane 1 3 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Tetrabromomethane 1 4 4 1 4 4 4 4 4 4 4 1 4 4 2 4 4
Tetraethyl lead 1 3 3 3 1 4 2 4 2 4 4 4 1 4 2 2 4 4
Tetraethylene glycol (TEG) 1 1 1 1 1 1 1 1 1
Tetrafluoromethane 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 4
Tetrahydrofuran (THF) 1 4 4 4 1 3 4 3 4 4 4 4 4 4 4 4 4 4
Tetralin (Tetrahydronaphthalene) 1 4 4 4 1 4 4 4 4 4 3 4 1 4 4 1 4 4
Thioglycolic acid 1 4 1 1 1 3 4 1 3 3 1 2
Thionyl chloride 1 4 4 1 4 4 4 4 4 4 4 1 4 4 4 4 4
Thiophene (Thiofuran) 1 4 4 1 4 4 4 4 3 4
Titanium sulfate 1 4 1 1 1 3 4 1 3 3 1 2
Titanium tetrachloride 2 2 4 4 1 4 4 4 3 4 4 4 1 4 2 2 4 4
Toluene (Toluol) 1 4 4 4 1 4 4 4 4 4 4 4 1 4 3 2 4 4
Toluene di-isocyanide (TDI) 1 4 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Toluidine 1 4 1 4 4 3 2 2 4
Transformer oil 1 1 4 2 1 4 1 4 1 2 1 4 1 1 1 1 4 2
Transmission fluid, type A 1 1 4 2 1 4 1 4 1 1 1 4 1 1 1 1 2 2
Triacetin 1 4 3 2 1 1 3 1 2 4 4 2 4 4 2 4 2 1
Trialkyl phosphate 1 1 4 4 1 2 4 2 4 4 4 4 4 4 4 4 4 4
Triaryl phosphate 1 1 4 4 1 1 4 2 4 4 4 4 1 4 4 2 4 3
Tributoxyl ethyl phosphate 1 1 2 4 1 1 1 4 4 4 3 1 4 4 2 4
Tributyl mercaptan 1 4 4 1 4 4 4 4 4 1 4 3 4 4
Trichlorofluoromethane 1 4 4 3 1 4 3 4 2 4 4 4 2 2 2 4 4
Trichloropropane 1 4 1 1 4 4 4 2 4
Trichlorotrifluoroethane 1 4 2 1 1 3 1 4 1 4 2 3 2 3 4 1 4
Tricresyl phosphate (TCP) 1 1 4 4 1 2 4 2 4 4 4 4 2 4 4 2 4 3
Tridecyl alcohol (Tridecanol) 1 1 1 1 1 1 1 1
45
FVMQ (Fluorosilicone)
NR (Natural Rubber)
FKM (Fluorocarbon)
Chemical compatibility
1 = Excellent
VMQ (Silicone)
EPR & EPDM
NBR (Nitrile)
2 = Good
PERLAST
IIR (Butyl)
3 = Doubtful
AU & EU
HNBR
FEPM
4 = Do not use
ACM
CSM
AEM
ECO
SBR
CR
* = Special formulation
PPE Prefix G A B C D E H J N P Q R V W Z F L S
Chemical or Media Dynamic And Static Applications Static Only
Triethylene glycol (TEG) 1 1 1 1 1 1 1 1 1 1 1 1
Trifluoroacetic Acid (TFA) 1* 4 1 1 1 4 1 1 3 3 1 1
Trifluoroethane 1 2 4 4 1 4 4 4 4 4 4 1 4 2 4 4
Trimethylpentane (Iso-octane) 1 2 4 3 1 4 1 4 1 1 2 4 1 1 1 1 2 4
Trinitrotoluene (TNT) 1 2 4 2 1 4 4 4 4 4 2 4 4 2 2 3
Trioctyl phosphate 1 1 4 4 1 1 1 4 4 4 4 2 4 4 2 4 3
Triolene (Olein) 1 4 4 1 4 2 3 2 4 4 2 3 4
Triphenyl phosphite 1 1 4 4 1 1 4 4 4 3 4
Tritolyl phosphate (Lindol) 1 1 4 4 1 1 4 1 4 4 4 4 2 4 4 3 4 3
Tung oil 1 1 4 2 1 4 3 1 1 3 4 1 1 1 2 3 4
Turbine oil 1 1 4 4 1 4 1 4 2 2 2 4 1 1 1 2 4 4
Turpentine 1 2 4 4 1 4 1 4 1 2 4 4 1 3 1 2 4 4
Type I fuel (Mil-S-3136) 1 3 4 2 1 4 1 4 1 2 1 4 1 1 1 1 2 4
Type II fuel (Mil-S-3136) 1 4 4 1 4 1 4 2 4 2 4 1 2 4 4
Type III fuel (Mil-S-3136) 1 4 4 4 1 4 2 4 1 4 2 4 1 3 1 1 4 4
Unsymmetrical dimethylhydrazine 2 3 2 2 1 1 2 1 2 4 4 1 4 4 2 4 1 4
Urea (Carbamide) 1 1 1 1 1 1 1 2 2 1 1
Uric acid 1 4 1 1 4 4 1 1 2
Valeric acid 1 4 1 1 1 4 1 1
Varnish 1 2 4 4 1 4 4 2 4 3 4 1 4 2 2 4 4
Vinylbenzene (Styrene) 1 2 4 4 1 4 4 4 4 4 4 4 2 4 4 3 4 4
Water, cold 1 1 1 2 1 1 2 1 1 4 4 1 1 3 1 1 1 1
Water, hot 1 1 1 1 2 2 4 4 3 1 4 1 1 1
Water, potable 1 1 1 1 1
Whiskey & wines 1 1 1 1 1 4 4 1 1 4 1 1 1
White oil 1 1 4 2 1 4 1 4 1 1 1 4 1 1 1 1 4 4
White pine oil 1 1 4 4 1 4 4 2 4 1 2 1 4 4
Wood alcohol (Methanol) 1 1 1 1 1 1 2 1 2 4 4 1 1 1 1 2 1 2
Wood oil 1 1 4 2 1 4 3 1 1 3 4 1 1 1 2 3 4
Xenon 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Xylene (Xylol) 1 3 4 4 1 4 4 4 4 4 4 4 1 4 4 1 4 4
Xylidine (Xylidin) 1 1 4 4 1 4 4 4 3 4 4 4 4 4 3 4 4 4
Zeolites 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Zinc acetate 1 3 3 2 1 1 3 1 3 4 4 2 4 4 2 4 4 4
Zinc ammonium chloride 1 1 1 1
Zinc carbonate 1 1 1 1 1 1 1 1 1 1 1
Zinc chloride 1 1 1 1 1 1 2 1 1 4 4 1 1 3 1 1 1 1
Zinc cyanide 1 1 1 1 3 1 1
Zinc hydrosulfite 1 1 1 1 1 1 1
Zinc nitrate 1 1 1 1 1 1 1
46
Elastomer terminology
Elastomer terminology
This section explains the key terms used to define the properties of elastomers.
Tensile Properties
S
Simple testing of elastomer samples in tension
is commonly used to define the strength of the
materials. The most common representation is
in the form of an engineering stress-strain
curve; engineering stress-strain uses the
original dimensions for calculations, as
opposed to the actual dimensions during
testing (the cross-section may not necessarily
remain constant during testing). A typical
engineering stress-strain curve from a tensile
test is shown opposite.
= Engineering stress.
= Engineering strain or elongation reported
as a percentage of the original gauge length.
Typical tensile stress-strain curves for elastomers
S = Stress
E = Elongation expressed as a percentage of the original gauge length (Strain)
47
Elastomer terminology
Elastomer terminology
This term indicates the resistance to propagation of small pre- IRHD International Rubber
cut in an elastomer. The most common test uses the Trouser Hardness Degrees
Tear method (ASTM D624, Die T), with the test sample Based on measuring the penetration of a specified rigid ball in a
having the shape described in the title. test specimen under a specified dead load. A scaled down
version of this dead load instrument is available for conducting
Friction, Wear and Abrasion measurements on small cross sections and thicknesses IRHD `M`.
The resistance to wear of a rubber when its surface is
subjected to mechanical action. It is usually expressed as an For curved surfaces the Apparent
abrasion resistance index referred to a standard rubber and is Hardness is often quoted, as IRHD and
applicable to all methods. Shore A values tend to be more
variable when measured across small
Friction curved surfaces, as is the
Friction can be defined as the resistance to sliding of one case with O-rings.
material over another. Testing of friction with relation to
elastomers is mainly associated with the tyre industry, and can Shore hardness degrees the testing
be split into two separate categories: static and dynamic. equipment used to measure hardness
Testing usually is performed using a sled of material loaded are often referred to as durometers
with additional weights to produce a normal force. This sled is (type A or D), both utilise a calibrated
then slid over a surface of a known surface-finish. The spring to act on a specified indentor to
resultant resistant force can be related back to the coefficient penetrate the test specimen.
of friction () using the formula F = R, where F is the resistant
force and R is the normal force. There are numerous The hardness scales are quoted in
drawbacks to this method, as elastomers do not fully comply degrees from 0 (infinitely soft) to 100
with this equation, but data can be comparable. (bone hard).
48
Elastomer terminology
Elastomer terminology
Compressive Properties CSR is measured by compressing a standard test piece to a
Compression set constant strain and measuring the force exerted by the test
A measure of a materials elasticity after prolonged action of piece at specific intervals under specified conditions. The
compression, either under ambient conditions, or whilst being decaying force is expressed as a percentage of the initial
exposured to elevated temperatures. counterforce.
49
Elastomer terminology
Elastomer terminology
- Embrittlement and hardening Similarly, Ozone (a powerful oxidising agent) can degrade
- Softening and becoming tacky elastomeric components in a similar manner to UV. Use of
- Swelling anti-ozonants and the careful choice of elastomers (saturated
- Volume loss polymers) can significantly reduce/eliminate this problem.
The most common effect is swelling either due to a solubility Low temperature resistance
effect, or chemical attack, resulting in a change in the The low temperature resistance of any elastomer is dependent
elastomers polarity. Though the volume increase may be upon the materials glass transition temperature (Tg). This
reversible, the effects on the polymer may not be. is the temperature at which the elastomer changes from a
rubber-like material to a brittle material. As an elastomer
Embrittlement and hardening are indicative of additional approaches its glass transition temperature, it would generally
cross-linking, and softening is indicative of degradation of the be expected that the tensile strength, hardness, modulus and
polymer/crosslink network. Volume loss is most usually linked compression set would all increase. The Tg for any given
to extraction of plasticisers and process aids, resulting in a elastomer is mainly a function of the polymer structure, but
material that is less flexible. can be altered slightly by the use of oils.
50
Elastomer terminology
Elastomer terminology
Peroxide or sulphur cure Out-gasing
Several cross-linking (curing) mechanisms can be employed The release of gas from a material, or low molecular portions of
for the different elastomer types, common amongst these are the material. These gases, together with gases upon the surface
sulphur-cured systems and peroxide-cured systems. In of the solid, can be released into a vacuum environment to form
general sulphur-cured systems offer better original mechanical a perceived leak. At ambient conditions the predominant out-
properties but worst heat ageing properties and peroxide gased substances are water vapour and hydrocarbons. The
systems vice-versa. rate of out-gasing increases at higher temperatures, which
increases permeation rate and can initiate chemical reactions
Coefficient of thermal expansion within the elastomer that release other gases. Out-gased
All materials (except for a very small number of exceptions) substances can condense onto surfaces or react with process
expand with increasing temperature. The degree to which any chemicals which may inhibit performance.
material expands is characteristic of that material. The value is
expressed in terms of the amount of linear or volumetric Tolerances
expansion that occurs with every unit of length or volume for The amount of variation permitted on dimensions or surfaces
every degree of temperature increase. during the manufacturing process. The tolerance is equal to
the difference between the maximum and minimum limits of
Volume change any specified dimension. As metals are hard and interference
The degree to which a material expands or contracts during may prevent assembly, they are usually toleranced as a fit.
exposure to operating environments is an important factor to Bores are defined as a dimension plus an allowable variation,
consider in any sealing application. Operating fluids can be and shafts are defined as a dimension minus an allowable
absorbed into a material causing it to swell. Operating fluids variation. As elastomer parts, such as O-rings, are flexible and
can also wash out ingredients within the material causing it are typically designed to operate in interference (compression
to decrease in volume, sometimes both can happen; an or tension), they are typically given a tolerance for diameter
initial swelling followed by shrinkage. Some high temperature and cross section.
and chemical environments can cause the cross-link
structure to tighten causing a decrease in volume. O-ring tolerances for each standard size can be found in the
Measurements of volume before and after exposure are O-ring size tables in section 12, page 57 of this publication.
expressed as a percent change.
We recommend the use of ISO3302-1 Class M2, X2 in the
design of custom elastomer components see page 56.
51
Hardware design
Hardware design guidelines for O-rings
The sealing mechanism of an O-ring is a two stage process; It is this force that forms the high pressure capability of the
compression and force. The initial compression (squeeze) O-ring. It is important that the pressure can energise the
upon the O-ring forms a physical barrier between the two O-ring to form this secondary sealing mechanism and hence
fluids, forming the initial seal. It is therefore important to free-space must be left in the groove, taking into account
accurately control the amount of compression that the O-ring tolerance stack-ups and differential thermal expansion.
is subjected to. The elastomer acts like an incompressible
viscous fluid with a very high surface tension. When acted Four typical groove geometries (as shown in diagram below)
upon by a differential pressure then the O-ring translates this are as follows:-
into force acting upon and normal to the mating surface. Piston seal Face seal
Rod seal Trapped seal
Trapped Seal
To achieve installation, each of these seal types requires different levels of stretch. To achieve a good seal, the O-ring must be
installed into suitable hardware to create a sealing system. Various international standards govern the specifications of such
sealing systems:
52
Hardware design guidelines for O-rings
Hardware design
For the standard O-ring sizes listed in this brochure
we recommend their use in grooves as defined in
the above AS and BS standards, up to the
maximum operating temperature of the material.
These standards are available from the relevant
governing bodies; or by using the Hardware
Design Tool found in the Technical section of
our website; www.prepol.com. This online tool
quickly identifies the best fit standard sized O-ring
and provides groove dimensions for the most
common AS and BS size seals used in plant
equipment, specifically, rod seals, piston seals,
face seals and trapped seals. It also provides a
detailed technical drawing of the groove showing
all dimensional measurements which can be
printed off and included in other reports and
drawings. For semiconductor applications, please
refer to our semiconductor brochure for static
groove sizing, as materials developed for this
specific industry present different characteristics.
Combinations of pressure
and clearance that lie to
the right of the pertinent
line will result in
extrusion of the seal.
53
O-ring tolerances
O ring tolerances to ISO3601-1 General Purpose
I/Dia. Tol + / - I/Dia. Tol + / - I/Dia. Tol + / - I/Dia. Tol + / - I/Dia. Tol + / -
2.80 0.13 53.00 0.50 145.00 1.13 268.00 1.92 433.00 2.99
4.00 0.14 54.50 0.51 147.50 1.14 272.00 1.96 437.00 3.01
5.30 0.15 56.00 0.52 150.00 1.16 276.00 1.98 443.00 3.05
7.10 0.16 58.00 0.54 152.50 1.18 280.00 2.01 450.00 3.09
8.50 0.17 60.00 0.55 155.00 1.19 283.00 2.03 456.00 3.13
9.75 0.18 61.50 0.56 157.50 1.21 286.00 2.05 462.00 3.17
10.60 0.19 63.00 0.57 160.00 1.23 290.00 2.08 466.00 3.19
11.80 0.20 65.00 0.58 162.50 1.24 295.00 2.11 470.00 3.22
13.20 0.21 67.00 0.60 165.00 1.26 300.00 2.14 475.00 3.25
15.00 0.22 69.00 0.61 167.50 1.28 303.00 2.16 479.00 3.28
16.00 0.23 71.00 0.63 170.00 1.29 307.00 2.19 483.00 3.30
17.00 0.24 73.00 0.64 172.50 1.31 311.00 2.21 487.00 3.33
19.00 0.25 75.00 0.65 175.00 1.33 315.00 2.24 493.00 3.36
20.60 0.26 77.50 0.67 177.50 1.34 320.00 2.27 500.00 3.41
21.20 0.27 80.00 0.69 180.00 1.36 325.00 2.30 508.00 3.46
22.40 0.28 82.50 0.71 182.50 1.38 330.00 2.33 515.00 3.50
23.60 0.29 85.00 0.72 185.00 1.39 335.00 2.36 523.00 3.55
25.00 0.30 87.50 0.74 87.50 1.41 340.00 2.40 530.00 3.60
26.50 0.31 90.00 0.76 190.00 1.43 345.00 2.43 538.00 3.65
28.00 0.32 92.50 0.77 195.00 1.46 350.00 2.46 545.00 3.69
29.00 0.33 95.00 0.79 200.00 1.49 355.00 2.49 553.00 3.74
30.00 0.34 97.50 0.81 203.00 1.51 360.00 2.52 560.00 3.78
31.50 0.35 100.00 0.82 206.00 1.53 365.00 2.56 570.00 3.85
33.50 0.36 103.00 0.85 212.00 1.57 370.00 2.59 580.00 3.91
34.50 0.37 106.00 0.87 218.00 1.61 375.00 2.62 590.00 3.97
37.50 0.39 109.00 0.89 224.00 1.65 379.00 2.64 600.00 4.03
38.70 0.40 112.00 0.91 227.00 1.67 383.00 2.67 608.00 4.08
40.00 0.41 115.00 0.93 230.00 1.69 387.00 2.70 615.00 4.12
41.20 0.42 118.00 0.95 236.00 1.73 391.00 2.72 623.00 4.17
42.50 0.43 122.00 0.97 239.00 1.75 395.00 2.75 630.00 4.22
45.00 0.44 125.00 0.99 243.00 1.77 400.00 2.78 640.00 4.28
46.20 0.45 128.00 1.01 250.00 1.82 406.00 2.82 650.00 4.34
47.50 0.46 132.00 1.04 254.00 1.84 412.00 2.85 660.00 4.40
48.70 0.47 136.00 1.07 258.00 1.87 418.00 2.89 670.00 4.47
50.00 0.48 140.00 1.09 261.00 1.89 425.00 2.93
51.50 0.49 142.50 1.11 265.00 1.91 429.00 2.96
To use: Descend I/Dia column to required size. Read-off the tolerance to the right of the size.
If required size is not listed, go to the first size greater size and read-off the tolerance to the right.
Notes: For sizes above 670.00, add/subtract 0.64% of the nominal diameter.
Cross section tolerances for ISO3601-1 are detailed at the bottom of the following page.
54
O ring tolerances to ISO3601-1 Aerospace Standard
O-ring tolerances
I/Dia. Tol + / - I/Dia. Tol + / - I/Dia. Tol + / - I/Dia. Tol + / - I/Dia. Tol + / -
2.00 0.10 34.50 0.30 73.00 0.52 128.00 0.83 230.00 1.39
3.75 0.11 36.50 0.31 75.00 0.53 132.00 0.85 236.00 1.42
5.30 0.12 38.70 0.32 77.50 0.55 136.00 0.87 243.00 1.46
6.90 0.13 40.00 0.33 80.00 0.56 140.00 0.89 250.00 1.49
8.50 0.14 41.20 0.34 82.50 0.57 145.00 0.92 258.00 1.54
10.00 0.15 43.70 0.35 85.00 0.59 150.00 0.95 265.00 1.57
11.80 0.16 45.00 0.36 87.50 0.60 155.00 0.98 272.00 1.61
13.20 0.17 47.50 0.37 90.00 0.62 160.00 1.00 280.00 1.65
15.00 0.18 48.70 0.38 92.50 0.63 165.00 1.03 290.00 1.71
16.00 0.19 50.00 0.39 95.00 0.64 170.00 1.06 300.00 1.76
18.00 0.20 51.50 0.40 97.50 0.66 175.00 1.09 307.00 1.80
20.00 0.21 53.00 0.41 100.00 0.67 180.00 1.11 315.00 1.84
21.20 0.22 56.00 0.42 103.00 0.69 185.00 1.14 325.00 1.90
22.40 0.23 58.00 0.44 106.00 0.71 190.00 1.17 335.00 1.95
25.00 0.24 60.00 0.45 109.00 0.72 195.00 1.20 345.00 2.00
26.50 0.25 63.00 0.46 112.00 0.74 200.00 1.22 355.00 2.05
28.00 0.26 65.00 0.48 115.00 0.76 206.00 1.26 365.00 2.11
30.00 0.27 67.00 0.49 118.00 0.77 212.00 1.29 375.00 2.16
31.50 0.28 69.00 0.50 122.00 0.80 218.00 1.32 387.00 2.22
33.50 0.29 71.00 0.51 125.00 0.81 224.00 1.35 400.00 2.29
To use: Descend I/Dia column to required size. Read-off the tolerance to the right of the size.
If required size is not listed, go to the first size greater size and read-off the tolerance to the right.
Notes: For sizes above 400.00, tolerance as per BS1806 (see pages 57-62).
Cross section tolerances for ISO3601-1 are detailed below:
C/S above Tol + / - C/S above Tol + / - C/S above Tol + / - C/S above Tol + / - C/S above Tol + / -
0.00 0.08 8.75 0.18 13.50 0.25 18.50 0.32 23.50 0.39
2.62 0.09 9.25 0.19 14.25 0.26 19.25 0.33 24.25 0.40
3.00 0.10 10.00 0.20 15.00 0.27 20.00 0.34 25.00 0.41
3.55 0.12 10.75 0.21 15.75 0.28 20.75 0.35 25.75 0.42
5.00 0.13 11.25 0.22 16.50 0.29 21.50 0.36 26.25 0.43
5.70 0.14 12.00 0.23 17.25 0.30 22.25 0.37 27.00 0.44
8.40 0.15 12.75 0.24 17.75 0.31 23.00 0.38 30.00 0.45
55
O-ring tolerances
Moulding tolerances according to ISO3302-1 (=BS3734-1)
Classes
The standard details four classes of mouldings and four classes for flash, adopted by PPE as follows:-
Dimensions
The standard details two types of dimension, as follows:-
F = Fixed dimensions
The dimensions are not affected by deforming influences such as flash thickness or lateral displacement of different mould parts
(upper and lower parts or cores).
C = Closure dimensions
These dimensions can be affected by variation in flash thickness or lateral displacement of different mould parts and therefore require
greater tolerances that those of fixed dimensions.
# = Dimension #
Example of a height dimension that is not affected by flash thickness, therefore this is considered to be a fixed dimension.
56
SAE AS568 American Standard O-ring sizes Le Joint Franais 'R' O-ring sizes
BS1806 British Standard O-ring sizes (imperial) ISO3601 International Organisation for
BS4518 British Standard O-ring sizes (metric) Standardisation O-ring sizes (General purpose)
O-ring sizes
Tolerance +/- (mm)
Internal Diameter
Internal Diameter
Internal Diameter
Size Reference
Size Reference
Cross Section
Cross Section
(mm)
(mm)
1.00 44.17 0.38 BS1806-031, AS568-031
1.15 0.13 R000
+/- 0.08 47.37 0.38 BS1806-032, AS568-032
1.02 50.52 0.46 BS1806-033, AS568-033
0.74 0.10 BS1806-001, AS568-001 53.67 0.46 BS1806-034, AS568-034
+/- 0.08
56.87 0.46 BS1806-035, AS568-035
1.27
1.07 0.10 +/- 0.08 BS1806-002, AS568-002 60.04 0.46 BS1806-036, AS568-036
63.22 0.46 BS1806-037, AS568-037
1.42 66.40 0.51 BS1806-038, AS568-038
4.70 0.13 AS568-901, BSM48-901
+/- 0.08
69.57 0.51 BS1806-039, AS568-039
1.53 72.76 0.51 1.78 BS1806-040, AS568-040
1.42 0.10 BS1806-003, AS568-003
+/- 0.08 75.92 0.61 +/- 0.08 BS1806-041, AS568-041
2.20 0.13 R00 82.27 0.61 BS1806-042, AS568-042
3.10 0.15 BS4518 0031-16 88.62 0.61 BS1806-043, AS568-043
4.10 0.15 BS4518 0041-16 94.97 0.69 BS1806-044, AS568-044
5.10 0.15 BS4518 0051-16 101.32 0.69 BS1806-045, AS568-045
6.10 0.15 BS4518 0061-16 107.67 0.76 BS1806-046, AS568-046
7.10 0.15 BS4518 0071-16 114.02 0.76 BS1806-047, AS568-047
8.10 0.15 BS4518 0081-16 120.37 0.76 BS1806-048, AS568-048
126.72 0.94 BS1806-049, AS568-049
9.10 0.15 BS4518 0091-16
10.10 0.20 BS4518 0101-16 133.07 0.94 BS1806-050, AS568-050
11.10 0.20 BS4518 0111-16 1.80 0.13 ISO3601-G
12.10 0.20 BS4518 0121-16 2.00 0.13 ISO3601-G
13.10 0.20 BS4518 0131-16 2.24 0.13 ISO3601-G
1.60
14.10 0.20 +/- 0.08 BS4518 0141-16 2.50 0.13 ISO3601-G
15.10 0.20 BS4518 0151-16 2.80 0.13 ISO3601-G
16.10 0.20 BS4518 0161-16 3.15 0.14 ISO3601-G
17.10 0.20 BS4518 0171-16 3.55 0.14 ISO3601-G
18.10 0.25 BS4518 0181-16 3.75 0.14 ISO3601-G
19.10 0.25 BS4518 0191-16 4.00 0.14 ISO3601-G
22.10 0.25 BS4518 0221-16 4.50 0.15 ISO3601-G
25.10 0.25 BS4518 0251-16 4.87 0.15 ISO3601-G
27.10 0.25 BS4518 0271-16 5.00 0.15 ISO3601-G
29.10 0.25 BS4518 0291-16 5.15 0.15 ISO3601-G
32.10 0.30 BS4518 0321-16 5.30 0.15 ISO3601-G
35.10 0.30 BS4518 0351-16 5.60 0.16 ISO3601-G
37.10 0.30 BS4518 0371-16 6.00 0.16 ISO3601-G
6.07 0.13 AS568-902, BSM48-902 6.30 0.16 ISO3601-G
1.63
+/- 0.08 6.70 0.16 ISO3601-G
7.65 0.13 AS568-903, BSM48-903
6.90 0.16 ISO3601-G
1.78 0.13 BS1806-004, AS568-004 7.10 0.16 ISO3601-G
2.57 0.13 BS1806-005, AS568-005 7.50 0.17 ISO3601-G
2.90 0.13 BS1806-006, AS568-006 8.00 0.17 ISO3601-G
3.69 0.13 BS1806-007, AS568-007 8.50 0.17 1.80 ISO3601-G
4.47 0.13 BS1806-008, AS568-008 8.75 0.18 +/- 0.08 ISO3601-G
5.28 0.13 BS1806-009, AS568-009 9.00 0.18 ISO3601-G
6.07 0.13 BS1806-010, AS568-010 9.50 0.18 ISO3601-G
7.66 0.13 BS1806-011, AS568-011 9.75 0.18 ISO3601-G
9.25 0.13 BS1806-012, AS568-012 10.00 0.19 ISO3601-G
10.82 0.13 BS1806-013, AS568-013 10.60 0.19 ISO3601-G
12.42 0.13 BS1806-014, AS568-014 11.20 0.20 ISO3601-G
14.00 0.18 BS1806-015, AS568-015 11.60 0.20 ISO3601-G
15.60 0.23 BS1806-016, AS568-016 11.80 0.19 ISO3601-G
17.16 0.23
1.78 BS1806-017, AS568-017 12.10 0.21 ISO3601-G
+/- 0.08
18.77 0.23 BS1806-018, AS568-018 12.50 0.21 ISO3601-G
20.35 0.23 BS1806-019, AS568-019 12.80 0.21 ISO3601-G
21.95 0.23 BS1806-020, AS568-020 13.20 0.21 ISO3601-G
23.52 0.23 BS1806-021, AS568-021 14.00 0.22 ISO3601-G
25.12 0.25 BS1806-022, AS568-022 14.50 0.22 ISO3601-G
26.70 0.25 BS1806-023, AS568-023 15.00 0.22 ISO3601-G
28.30 0.25 BS1806-024, AS568-024 15.50 0.23 ISO3601-G
29.87 0.28 BS1806-025, AS568-025 16.00 0.23 ISO3601-G
31.47 0.28 BS1806-026, AS568-026 17.00 0.24 ISO3601-G
33.05 0.28 BS1806-027, AS568-027 18.00 0.25 ISO3601-G
34.65 0.33 BS1806-028, AS568-028 19.00 0.25 ISO3601-G
37.82 0.33 BS1806-029, AS568-029 20.00 0.26 ISO3601-G
41.00 0.33 BS1806-030, AS568-030 20.60 0.26 ISO3601-G
57
SAE AS568 American Standard O-ring sizes Le Joint Franais 'R' O-ring sizes
BS1806 British Standard O-ring sizes (imperial) ISO3601 International Organisation for
BS4518 British Standard O-ring sizes (metric) Standardisation O-ring sizes (General purpose)
O-ring sizes
Internal Diameter
Internal Diameter
Internal Diameter
Size Reference
Size Reference
Cross Section
Cross Section
(mm)
(mm)
21.20 0.27 ISO3601-G 58.60 0.40 BS4518 0586-24
22.40 0.28 ISO3601-G 59.60 0.40 BS4518 0596-24
23.00 0.29 ISO3601-G 61.60 0.40 BS4518 0616-24
23.60 0.29 ISO3601-G 62.60 0.40 2.40 BS4518 0626-24
+/- 0.08
24.30 0.30 ISO3601-G 64.60 0.40 BS4518 0646-24
25.00 0.30 1.80 ISO3601-G 67.60 0.40 BS4518 0676-24
25.80 0.31 +/- 0.08 ISO3601-G 69.60 0.40 BS4518 0696-24
26.50 0.31 ISO3601-G
27.30 0.32 ISO3601-G 17.93 0.23 2.46 AS568-909, BSM48-909
28.00 0.32 ISO3601-G 19.18 0.23 +/- 0.08 AS568-910, BSM48-910
29.00 0.33 ISO3601-G 1.24 0.10 BS1806-102, AS568-102
30.00 0.34 ISO3601-G 2.06 0.13 BS1806-103, AS568-103
8.92 0.13 AS568-904, BSM48-904 2.84 0.13 BS1806-104, AS568-104
1.83
+/- 0.08 3.63 0.13 BS1806-105, AS568-105
10.52 0.13 AS568-905, BSM48-905
4.42 0.13 BS1806-106, AS568-106
2.40 0.13 R0 5.23 0.13 BS1806-107, AS568-107
2.60 0.13 R1 6.02 0.13 BS1806-108, AS568-108
3.40 0.14 R2 7.59 0.13 BS1806-109, AS568-109
4.20 0.15 1.90 R3 9.19 0.13 BS1806-110, AS568-110
4.90 0.15 +/- 0.08 R4 10.77 0.13 BS1806-111, AS568-111
5.70 0.16 R5 12.37 0.13 BS1806-112, AS568-112
7.20 0.17 R6 13.94 0.18 BS1806-113, AS568-113
8.90 0.18 R7 15.54 0.23 BS1806-114, AS568-114
17.12 0.23 BS1806-115, AS568-115
11.89 0.13
1.98 AS568-906, BSM48-906 18.72 0.23 BS1806-116, AS568-116
+/- 0.08
20.29 0.25 BS1806-117, AS568-117
2.08 21.89 0.25 BS1806-118, AS568-118
13.46 0.18 +/- 0.08 AS568-907, BSM48-907
23.47 0.25 BS1806-119, AS568-119
2.21 25.07 0.25 BS1806-120, AS568-120
16.36 0.23 AS568-908, BSM48-908
+/- 0.08 26.64 0.25 BS1806-121, AS568-121
28.24 0.25 BS1806-122, AS568-122
3.60 0.15 BS4518 0036-24 29.82 0.30 BS1806-123, AS568-123
4.60 0.15 BS4518 0046-24 31.42 0.30 BS1806-124, AS568-124
5.60 0.15 BS4518 0056-24 32.99 0.30 BS1806-125, AS568-125
6.60 0.15 BS4518 0066-24 34.59 0.30 BS1806-126, AS568-126
7.60 0.15 BS4518 0076-24 36.17 0.30 BS1806-127, AS568-127
8.60 0.15 BS4518 0086-24 37.77 0.30 BS1806-128, AS568-128
9.60 0.15 BS4518 0096-24 39.34 0.38 BS1806-129, AS568-129
10.60 0.20 BS4518 0106-24 2.62
40.94 0.38 +/- 0.08 BS1806-130, AS568-130
11.60 0.20 BS4518 0116-24 42.52 0.38 BS1806-131, AS568-131
12.60 0.20 BS4518 0126-24 44.12 0.38 BS1806-132, AS568-132
13.60 0.20 BS4518 0136-24 45.69 0.38 BS1806-133, AS568-133
14.60 0.20 BS4518 0146-24 47.29 0.43 BS1806-134, AS568-134
15.60 0.20 BS4518 0156-24 48.90 0.43 BS1806-135, AS568-135
16.60 0.20 BS4518 0166-24 50.47 0.43 BS1806-136, AS568-136
17.60 0.20 BS4518 0176-24 52.07 0.43 BS1806-137, AS568-137
18.60 0.25 BS4518 0186-24 53.64 0.43 BS1806-138, AS568-138
19.60 0.25 BS4518 0196-24 55.25 0.43 BS1806-139, AS568-139
20.60 0.25 2.40 BS4518 0206-24 56.82 0.43 BS1806-140, AS568-140
21.60 0.25 +/- 0.08 BS4518 0216-24 58.42 0.51 BS1806-141, AS568-141
24.60 0.25 BS4518 0246-24 59.99 0.51 BS1806-142, AS568-142
27.60 0.25 BS4518 0276-24 61.60 0.51 BS1806-143, AS568-143
29.60 0.25 BS4518 0296-24 63.17 0.51 BS1806-144, AS568-144
31.60 0.30 BS4518 0316-24 64.77 0.51 BS1806-145, AS568-145
34.60 0.30 BS4518 0346-24 66.34 0.51 BS1806-146, AS568-146
35.60 0.30 BS4518 0356-24 67.95 0.56 BS1806-147, AS568-147
37.60 0.30 BS4518 0376-24 69.52 0.56 BS1806-148, AS568-148
39.60 0.30 BS4518 0396-24 71.12 0.56 BS1806-149, AS568-149
41.60 0.30 BS4518 0416-24 72.69 0.56 BS1806-150, AS568-150
44.60 0.30 BS4518 0446-24 75.87 0.61 BS1806-151, AS568-151
45.60 0.30 BS4518 0456-24 82.22 0.61 BS1806-152, AS568-152
47.60 0.30 BS4518 0476-24 88.57 0.61 BS1806-153, AS568-153
49.60 0.30 BS4518 0496-24 94.92 0.71 BS1806-154, AS568-154
51.60 0.40 BS4518 0516-24 101.27 0.71 BS1806-155, AS568-155
54.60 0.40 BS4518 0546-24 107.62 0.76 BS1806-156, AS568-156
55.60 0.40 BS4518 0556-24 113.97 0.76 BS1806-157, AS568-157
57.60 0.40 BS4518 0576-24 120.32 0.76 BS1806-158, AS568-158
58
SAE AS568 American Standard O-ring sizes Le Joint Franais 'R' O-ring sizes
BS1806 British Standard O-ring sizes (imperial) ISO3601 International Organisation for
BS4518 British Standard O-ring sizes (metric) Standardisation O-ring sizes (General purpose)
O-ring sizes
Tolerance +/- (mm)
Internal Diameter
Internal Diameter
Internal Diameter
Size Reference
Size Reference
Cross Section
Cross Section
(mm)
(mm)
126.67 0.89 BS1806-159, AS568-159 65.00 0.58 ISO3601-G
133.02 0.89 BS1806-160, AS568-160 67.00 0.60 ISO3601-G
139.37 0.89 BS1806-161, AS568-161 69.00 0.61 ISO3601-G
145.72 0.89 BS1806-162, AS568-162 71.00 0.63 ISO3601-G
152.07 0.89 BS1806-163, AS568-163 73.00 0.64 ISO3601-G
158.42 1.02 BS1806-164, AS568-164 75.00 0.65 ISO3601-G
164.77 1.02 BS1806-165, AS568-165 77.50 0.67 ISO3601-G
171.12 1.02 BS1806-166, AS568-166 80.00 0.69 ISO3601-G
177.47 1.02 BS1806-167, AS568-167 82.50 0.71 2.65 ISO3601-G
183.82 1.14 2.62 BS1806-168, AS568-168 85.00 0.72 +/- 0.09 ISO3601-G
190.17 1.14 +/- 0.08 BS1806-169, AS568-169 87.50 0.74 ISO3601-G
196.52 1.14 BS1806-170, AS568-170 90.00 0.76 ISO3601-G
202.87 1.14 BS1806-171, AS568-171 92.50 0.77 ISO3601-G
209.22 1.27 BS1806-172, AS568-172 95.00 0.79 ISO3601-G
215.57 1.27 BS1806-173, AS568-173 97.50 0.81 ISO3601-G
221.92 1.27 BS1806-174, AS568-174 100.00 0.82 ISO3601-G
228.27 1.27 BS1806-175, AS568-175 103.00 0.85 ISO3601-G
234.62 1.40 BS1806-176, AS568-176 106.00 0.87 ISO3601-G
240.97 1.40 BS1806-177, AS568-177
8.90 0.18 R8
247.32 1.40 BS1806-178, AS568-178
10.50 0.19 R9
14.00 0.22 ISO3601-G 12.10 0.21 R10
14.50 0.22 ISO3601-G 13.60 0.22 2.70 R11
+/- 0.09
15.00 0.22 ISO3601-G 15.10 0.23 R12
15.50 0.23 ISO3601-G 16.90 0.24 R13
16.00 0.23 ISO3601-G 18.40 0.25 R14
17.00 0.24 ISO3601-G
18.00 0.25 ISO3601-G 21.92 0.23 AS568-911, BSM48-911
19.00 0.25 ISO3601-G 23.47 0.23 AS568-912, BSM48-912
20.00 0.26 ISO3601-G 25.04 0.25 2.95 AS568-913, BSM48-913
20.60 0.26 ISO3601-G 26.59 0.25 +/- 0.10 AS568-914, BSM48-914
21.20 0.27 ISO3601-G 29.74 0.25 AS568-916, BSM48-916
22.40 0.28 ISO3601-G 34.42 0.30 AS568-918, BSM48-918
23.00 0.29 ISO3601-G 19.50 0.25 BS4518 0195-30
23.60 0.29 ISO3601-G 21.50 0.25 BS4518 0215-30
24.30 0.30 ISO3601-G
22.50 0.25 BS4518 0225-30
25.00 0.30 ISO3601-G
24.50 0.25 BS4518 0245-30
25.80 0.31 ISO3601-G
25.50 0.25 BS4518 0255-30
26.50 0.31 ISO3601-G
26.50 0.25 BS4518 0265-30
27.30 0.32 ISO3601-G
27.50 0.25 BS4518 0275-30
28.00 0.32 ISO3601-G
29.50 0.25 BS4518 0295-30
29.00 0.33 ISO3601-G
31.50 0.30 BS4518 0315-30
30.00 0.34 ISO3601-G
32.50 0.30 BS4518 0325-30
31.50 0.35 ISO3601-G
2.65 34.50 0.30 BS4518 0345-30
32.50 0.36 ISO3601-G
+/- 0.09 35.50 0.30 BS4518 0355-30
33.50 0.36 ISO3601-G
36.50 0.30 BS4518 0365-30
34.50 0.37 ISO3601-G
35.50 0.38 ISO3601-G 37.47 0.36 AS568-920, BSM48-920
36.50 0.38 ISO3601-G 37.50 0.30 BS4518 0375-30
37.50 0.39 ISO3601-G 39.50 0.30 BS4518 0395-30
38.70 0.40 ISO3601-G 41.50 0.30 3.00 BS4518 0415-30
40.00 0.41 ISO3601-G 42.50 0.30 +/- 0.10 BS4518 0425-30
41.20 0.42 ISO3601-G 43.69 0.36 AS568-924, BSM48-924
42.50 0.43 ISO3601-G 44.50 0.30 BS4518 0445-30
43.70 0.44 ISO3601-G 49.50 0.30 BS4518 0495-30
45.00 0.44 ISO3601-G 53.09 0.46 AS568-928, BSM48-928
46.20 0.45 ISO3601-G 54.50 0.40 BS4518 0545-30
47.50 0.46 ISO3601-G 55.50 0.40 BS4518 0555-30
48.70 0.47 ISO3601-G 57.50 0.40 BS4518 0575-30
50.00 0.48 ISO3601-G 59.36 0.46 AS568-932, BSM48-932
51.50 0.49 ISO3601-G 59.50 0.40 BS4518 0595-30
53.00 0.50 ISO3601-G 62.50 0.40 BS4518 0625-30
54.50 0.51 ISO3601-G 64.50 0.40 BS4518 0645-30
56.00 0.52 ISO3601-G 69.50 0.40 BS4518 0695-30
58.00 0.54 ISO3601-G 74.50 0.40 BS4518 0745-30
60.00 0.55 ISO3601-G 79.50 0.40 BS4518 0795-30
61.50 0.56 ISO3601-G 84.50 0.50 BS4518 0845-30
63.00 0.57 ISO3601-G 89.50 0.50 BS4518 0895-30
59
SAE AS568 American Standard O-ring sizes Le Joint Franais 'R' O-ring sizes
BS1806 British Standard O-ring sizes (imperial) ISO3601 International Organisation for
BS4518 British Standard O-ring sizes (metric) Standardisation O-ring sizes (General purpose)
O-ring sizes
Internal Diameter
Internal Diameter
Internal Diameter
Size Reference
Size Reference
Cross Section
Cross Section
(mm)
(mm)
94.50 0.50 BS4518 0945-30 94.84 0.71 BS1806-240, AS568-240
99.50 0.50 BS4518 0995-30 98.02 0.71 BS1806-241, AS568-241
104.50 0.50 BS4518 1045-30 101.19 0.71 BS1806-242, AS568-242
109.50 0.50 BS4518 1095-30 104.37 0.71 BS1806-243, AS568-243
114.50 0.50 BS4518 1145-30 107.54 0.76 BS1806-244, AS568-244
119.50 0.50 BS4518 1195-30 110.72 0.76 BS1806-245, AS568-245
124.50 0.60 BS4518 1245-30 113.89 0.76 BS1806-246, AS568-246
129.50 0.60 BS4518 1295-30 117.07 0.76 BS1806-247, AS568-247
134.50 0.60 BS4518 1345-30 120.24 0.76 BS1806-248, AS568-248
139.50 0.60 BS4518 1395-30 123.42 0.89 BS1806-249, AS568-249
144.50 0.60 BS4518 1445-30 126.59 0.89 BS1806-250, AS568-250
149.50 0.60 BS4518 1495-30 129.77 0.89 BS1806-251, AS568-251
154.50 0.60 BS4518 1545-30 132.94 0.89 BS1806-252, AS568-252
159.50 0.60 3.00 BS4518 1595-30 136.12 0.89 BS1806-253, AS568-253
164.50 0.60 +/- 0.10 BS4518 1645-30 139.29 0.89 BS1806-254, AS568-254
169.50 0.60 BS4518 1695-30 142.47 0.89 BS1806-255, AS568-255
174.50 0.60 BS4518 1745-30 145.64 0.89 BS1806-256, AS568-256
179.50 0.60 BS4518 1795-30 148.82 0.89 BS1806-257, AS568-257
184.50 0.80 BS4518 1845-30 151.99 0.89 BS1806-258, AS568-258
189.50 0.80 BS4518 1895-30 158.34 1.02 BS1806-259, AS568-259
194.50 0.80 BS4518 1945-30 164.69 1.02 BS1806-260, AS568-260
199.50 0.80 BS4518 1995-30 171.04 1.02 BS1806-261, AS568-261
177.39 1.02 3.53 BS1806-262, AS568-262
209.50 0.80 BS4518 2095-30
+/- 0.10
219.50 0.80 BS4518 2195-30 183.74 1.14 BS1806-263, AS568-263
229.50 0.80 BS4518 2295-30 190.09 1.14 BS1806-264, AS568-264
239.50 0.80 BS4518 2395-30 196.44 1.14 BS1806-265, AS568-265
244.50 0.80 BS4518 2445-30 202.79 1.14 BS1806-266, AS568-266
249.50 0.80 BS4518 2495-30 209.14 1.27 BS1806-267, AS568-267
215.49 1.27 BS1806-268, AS568-268
4.34 0.13 BS1806-201, AS568-201 221.84 1.27 BS1806-269, AS568-269
5.94 0.13 BS1806-202, AS568-202 228.19 1.27 BS1806-270, AS568-270
7.52 0.13 BS1806-203, AS568-203 234.54 1.40 BS1806-271, AS568-271
9.12 0.13 BS1806-204, AS568-204 240.89 1.40 BS1806-272, AS568-272
10.69 0.13 BS1806-205, AS568-205 247.24 1.40 BS1806-273, AS568-273
12.29 0.13 BS1806-206, AS568-206 253.59 1.40 BS1806-274, AS568-274
13.87 0.18 BS1806-207, AS568-207 266.29 1.40 BS1806-275, AS568-275
15.47 0.23 BS1806-208, AS568-208 278.99 1.65 BS1806-276, AS568-276
17.04 0.23 BS1806-209, AS568-209 291.69 1.65 BS1806-277, AS568-277
18.64 0.25 BS1806-210, AS568-210 304.39 1.65 BS1806-278, AS568-278
20.22 0.25 BS1806-211, AS568-211 329.79 1.65 BS1806-279, AS568-279
21.82 0.25 BS1806-212, AS568-212 355.19 1.65 BS1806-280, AS568-280
23.39 0.25 BS1806-213, AS568-213 380.57 1.65 BS1806-281, AS568-281
24.99 0.25 BS1806-214, AS568-214 405.26 1.91 BS1806-282, AS568-282
26.57 0.25 BS1806-215, AS568-215 430.66 2.03 BS1806-283, AS568-283
28.17 0.30 BS1806-216, AS568-216 456.06 2.16 BS1806-284, AS568-284
29.74 0.30 BS1806-217, AS568-217
31.34 0.30 BS1806-218, AS568-218 18.00 0.25 ISO3601-G
32.92 0.30 BS1806-219, AS568-219 19.00 0.25 ISO3601-G
3.53 20.00 0.26 ISO3601-G
34.52 0.30 BS1806-220, AS568-220
+/- 0.10
36.09 0.30 BS1806-221, AS568-221 20.60 0.26 ISO3601-G
37.69 0.38 BS1806-222, AS568-222 21.20 0.27 ISO3601-G
40.87 0.38 BS1806-223, AS568-223 22.40 0.28 ISO3601-G
44.04 0.38 BS1806-224, AS568-224 23.00 0.29 ISO3601-G
47.22 0.46 BS1806-225, AS568-225 23.60 0.29 ISO3601-G
50.39 0.46 BS1806-226, AS568-226 24.30 0.30 ISO3601-G
53.57 0.46 BS1806-227, AS568-227 25.00 0.30 ISO3601-G
56.74 0.51 BS1806-228, AS568-228 25.80 0.31 3.55 ISO3601-G
59.92 0.51 BS1806-229, AS568-229 26.50 0.31 +/- 0.10 ISO3601-G
63.09 0.51 BS1806-230, AS568-230 27.30 0.32 ISO3601-G
66.27 0.51 BS1806-231, AS568-231 28.00 0.32 ISO3601-G
69.44 0.61 BS1806-232, AS568-232 29.00 0.33 ISO3601-G
72.62 0.61 BS1806-233, AS568-233 30.00 0.34 ISO3601-G
75.79 0.61 BS1806-234, AS568-234 31.50 0.35 ISO3601-G
78.97 0.61 BS1806-235, AS568-235 32.50 0.36 ISO3601-G
82.14 0.61 BS1806-236, AS568-236 33.50 0.36 ISO3601-G
85.32 0.61 BS1806-237, AS568-237 34.50 0.37 ISO3601-G
88.49 0.61 BS1806-238, AS568-238 35.50 0.38 ISO3601-G
91.67 0.71 BS1806-239, AS568-239 36.50 0.38 ISO3601-G
60
SAE AS568 American Standard O-ring sizes Le Joint Franais 'R' O-ring sizes
BS1806 British Standard O-ring sizes (imperial) ISO3601 International Organisation for
BS4518 British Standard O-ring sizes (metric) Standardisation O-ring sizes (General purpose)
O-ring sizes
Tolerance +/- (mm)
Internal Diameter
Internal Diameter
Internal Diameter
Size Reference
Size Reference
Cross Section
Cross Section
(mm)
(mm)
37.50 0.39 ISO3601-G 18.30 0.25 R15
38.70 0.40 ISO3601-G 19.80 0.26 R16
40.00 0.41 ISO3601-G 21.30 0.28 R17
41.20 0.42 ISO3601-G 23.00 0.29 R18
42.50 0.43 ISO3601-G 24.60 0.30 R19
43.70 0.44 ISO3601-G 26.20 0.31 R20
45.00 0.44 ISO3601-G 27.80 0.32 3.60 R21
46.20 0.45 ISO3601-G +/- 0.10
29.30 0.34 R22
47.50 0.46 ISO3601-G 30.80 0.35 R23
48.70 0.47 ISO3601-G 32.50 0.36 R24
50.00 0.48 ISO3601-G 34.10 0.37 R25
51.50 0.49 ISO3601-G 35.60 0.39 R26
53.00 0.50 ISO3601-G
37.30 0.39 R27
54.50 0.51 ISO3601-G
56.00 0.52 ISO3601-G 40.00 0.41 ISO3601-G
58.00 0.54 ISO3601-G 41.20 0.42 ISO3601-G
60.00 0.55 ISO3601-G 42.50 0.43 ISO3601-G
61.50 0.56 ISO3601-G 43.70 0.44 ISO3601-G
63.00 0.57 ISO3601-G 45.00 0.44 ISO3601-G
65.00 0.58 ISO3601-G 46.20 0.45 ISO3601-G
67.00 0.60 ISO3601-G 47.50 0.46 ISO3601-G
69.00 0.61 ISO3601-G 48.70 0.47 ISO3601-G
71.00 0.63 ISO3601-G 50.00 0.48 ISO3601-G
73.00 0.64 ISO3601-G 51.50 0.49 ISO3601-G
75.00 0.65 ISO3601-G 53.00 0.50 ISO3601-G
77.50 0.67 ISO3601-G 54.50 0.51 ISO3601-G
80.00 0.69 ISO3601-G 56.00 0.52 ISO3601-G
82.50 0.71 ISO3601-G 58.00 0.54 ISO3601-G
85.00 0.72 ISO3601-G 60.00 0.55 ISO3601-G
87.50 0.74 ISO3601-G 61.50 0.56 ISO3601-G
90.00 0.76 ISO3601-G 63.00 0.57 ISO3601-G
92.50 0.77 ISO3601-G 65.00 0.58 ISO3601-G
95.00 0.79 ISO3601-G 67.00 0.60 ISO3601-G
97.50 0.81 ISO3601-G 69.00 0.61 ISO3601-G
100.00 0.82
3.55 ISO3601-G
+/- 0.10 71.00 0.63 ISO3601-G
103.00 0.85 ISO3601-G 73.00 0.64 ISO3601-G
106.00 0.87 ISO3601-G
75.00 0.65 ISO3601-G
109.00 0.89 ISO3601-G
77.50 0.67 ISO3601-G
112.00 0.91 ISO3601-G
80.00 0.69 ISO3601-G
115.00 0.93 ISO3601-G
82.50 0.71 ISO3601-G
118.00 0.95 ISO3601-G
85.00 0.72 5.30 ISO3601-G
122.00 0.97 ISO3601-G
87.50 0.74 +/- 0.13 ISO3601-G
125.00 0.99 ISO3601-G
90.00 0.76 ISO3601-G
128.00 1.01 ISO3601-G
92.50 0.77 ISO3601-G
132.00 1.04 ISO3601-G
95.00 0.79 ISO3601-G
136.00 1.07 ISO3601-G
97.50 0.81 ISO3601-G
140.00 1.09 ISO3601-G
142.50 1.11 ISO3601-G 100.00 0.82 ISO3601-G
145.00 1.13 ISO3601-G 103.00 0.85 ISO3601-G
147.50 1.14 ISO3601-G 106.00 0.87 ISO3601-G
150.00 1.16 ISO3601-G 109.00 0.89 ISO3601-G
152.50 1.18 ISO3601-G 112.00 0.91 ISO3601-G
155.00 1.19 ISO3601-G 115.00 0.93 ISO3601-G
157.50 1.21 ISO3601-G 118.00 0.95 ISO3601-G
160.00 1.23 ISO3601-G 122.00 0.97 ISO3601-G
162.50 1.24 ISO3601-G 125.00 0.99 ISO3601-G
165.00 1.26 ISO3601-G 128.00 1.01 ISO3601-G
167.50 1.28 ISO3601-G 132.00 1.04 ISO3601-G
170.00 1.29 ISO3601-G 136.00 1.07 ISO3601-G
172.50 1.31 ISO3601-G 140.00 1.09 ISO3601-G
175.00 1.33 ISO3601-G 142.50 1.11 ISO3601-G
177.50 1.34 ISO3601-G 145.00 1.13 ISO3601-G
180.00 1.36 ISO3601-G 147.50 1.14 ISO3601-G
182.50 1.38 ISO3601-G 150.00 1.16 ISO3601-G
185.00 1.39 ISO3601-G 152.50 1.18 ISO3601-G
187.50 1.41 ISO3601-G 155.00 1.19 ISO3601-G
190.00 1.43 ISO3601-G 157.50 1.21 ISO3601-G
195.00 1.46 ISO3601-G 160.00 1.23 ISO3601-G
200.00 1.49 ISO3601-G 162.50 1.24 ISO3601-G
61
SAE AS568 American Standard O-ring sizes Le Joint Franais 'R' O-ring sizes
BS1806 British Standard O-ring sizes (imperial) ISO3601 International Organisation for
BS4518 British Standard O-ring sizes (metric) Standardisation O-ring sizes (General purpose)
O-ring sizes
Internal Diameter
Internal Diameter
Internal Diameter
Size Reference
Size Reference
Cross Section
Cross Section
(mm)
(mm)
165.00 1.26 ISO3601-G 23.16 0.25 BS1806-317, AS568-317
167.50 1.28 ISO3601-G 24.77 0.25 BS1806-318, AS568-318
170.00 1.29 ISO3601-G 26.34 0.25 BS1806-319, AS568-319
172.50 1.31 ISO3601-G 27.94 0.30 BS1806-320, AS568-320
175.00 1.33 ISO3601-G 29.51 0.30 BS1806-321, AS568-321
177.50 1.34 ISO3601-G 31.12 0.30 BS1806-322, AS568-322
180.00 1.36 ISO3601-G 32.69 0.30 BS1806-323, AS568-323
182.50 1.38 ISO3601-G 34.29 0.30 BS1806-324, AS568-324
185.00 1.39 ISO3601-G 37.47 0.38 BS1806-325, AS568-325, R28
187.50 1.41 ISO3601-G 40.64 0.38 BS1806-326, AS568-326, R29
190.00 1.43 ISO3601-G 43.82 0.38 BS1806-327, AS568-327, R30
195.00 1.46 ISO3601-G 46.99 0.38 BS1806-328, AS568-328, R31
200.00 1.49 ISO3601-G 50.17 0.46 BS1806-329, AS568-329, R32
203.00 1.51 ISO3601-G 53.34 0.46 BS1806-330, AS568-330, R33
206.00 1.53 ISO3601-G 56.52 0.46 BS1806-331, AS568-331, R34
212.00 1.57 ISO3601-G 59.69 0.46 BS1806-332, AS568-332, R35
218.00 1.61 ISO3601-G 62.87 0.51 BS1806-333, AS568-333, R36
224.00 1.65 ISO3601-G 66.04 0.51 BS1806-334, AS568-334, R37
227.00 1.67 ISO3601-G 69.22 0.51 BS1806-335, AS568-335, R38
230.00 1.69 ISO3601-G 72.39 0.51 BS1806-336, AS568-336, R39
236.00 1.73 ISO3601-G 75.57 0.61 BS1806-337, AS568-337, R40
239.00 1.75 ISO3601-G 78.74 0.61 BS1806-338, AS568-338, R41
243.00 1.77 ISO3601-G 81.92 0.61 BS1806-339, AS568-339, R42
250.00 1.82 ISO3601-G 85.09 0.61 BS1806-340, AS568-340, R43
254.00 1.84 ISO3601-G 88.27 0.61 BS1806-341, AS568-341, R44
258.00 1.87 ISO3601-G 91.44 0.71 BS1806-342, AS568-342, R45
261.00 1.89 ISO3601-G 94.62 0.71 BS1806-343, AS568-343, R46
265.00 1.91 ISO3601-G 97.79 0.71 BS1806-344, AS568-344, R47
268.00 1.92 ISO3601-G 100.97 0.71 BS1806-345, AS568-345, R48
272.00 1.96 5.30 ISO3601-G
+/- 0.13 104.14 0.71 BS1806-346, AS568-346, R49
276.00 1.98 ISO3601-G 107.32 0.76 BS1806-347, AS568-347, R50
280.00 2.01 ISO3601-G 110.49 0.76 BS1806-348, AS568-348, R51
283.00 2.03 ISO3601-G 113.67 0.76 BS1806-349, AS568-349, R52
286.00 2.05 ISO3601-G 5.33
116.84 0.76 BS1806-350, AS568-350
290.00 2.08 ISO3601-G +/- 0.13
120.02 0.76 BS1806-351, AS568-351
295.00 2.11 ISO3601-G 123.19 0.76 BS1806-352, AS568-352
300.00 2.14 ISO3601-G 126.37 0.94 BS1806-353, AS568-353
303.00 2.16 ISO3601-G
129.54 0.94 BS1806-354, AS568-354
307.00 2.19 ISO3601-G
132.72 0.94 BS1806-355, AS568-355
311.00 2.21 ISO3601-G
135.89 0.94 BS1806-356, AS568-356
315.00 2.24 ISO3601-G
139.07 0.94 BS1806-357, AS568-357
320.00 2.27 ISO3601-G
142.24 0.94 BS1806-358, AS568-358
325.00 2.30 ISO3601-G
145.42 0.94 BS1806-359, AS568-359
330.00 2.33 ISO3601-G
148.59 0.94 BS1806-360, AS568-360
335.00 2.36 ISO3601-G
151.77 0.94 BS1806-361, AS568-361
340.00 2.40 ISO3601-G
158.12 1.02 BS1806-362, AS568-362
345.00 2.43 ISO3601-G
164.47 1.02 BS1806-363, AS568-363
350.00 2.46 ISO3601-G
170.82 1.02 BS1806-364, AS568-364
355.00 2.49 ISO3601-G
177.17 1.02 BS1806-365, AS568-365
360.00 2.52 ISO3601-G
183.52 1.14 BS1806-366, AS568-366
365.00 2.56 ISO3601-G
189.87 1.14 BS1806-367, AS568-367
370.00 2.59 ISO3601-G
196.22 1.14 BS1806-368, AS568-368
375.00 2.62 ISO3601-G
202.57 1.14 BS1806-369, AS568-369
379.00 2.64 ISO3601-G
208.92 1.27 BS1806-370, AS568-370
383.00 2.67 ISO3601-G
215.27 1.27 BS1806-371, AS568-371
387.00 2.70 ISO3601-G
221.62 1.27 BS1806-372, AS568-372
391.00 2.72 ISO3601-G
395.00 2.75 ISO3601-G 227.97 1.27 BS1806-373, AS568-373
234.32 1.40 BS1806-374, AS568-374
400.00 2.78 ISO3601-G
240.67 1.40 BS1806-375, AS568-375
10.46 0.13 BS1806-309, AS568-309 247.02 1.40 BS1806-376, AS568-376
12.07 0.13 BS1806-310, AS568-310 253.37 1.40 BS1806-377, AS568-377
13.64 0.18 BS1806-311, AS568-311 266.07 1.52 BS1806-378, AS568-378
15.24 0.23 5.33 BS1806-312, AS568-312 278.77 1.52 BS1806-379, AS568-379
16.81 0.23 +/- 0.13 BS1806-313, AS568-313 291.47 1.65 BS1806-380, AS568-380
18.42 0.25 BS1806-314, AS568-314 304.17 1.65 BS1806-381, AS568-381
19.99 0.25 BS1806-315, AS568-315 329.57 1.65 BS1806-382, AS568-382
21.59 0.25 BS1806-316, AS568-316 354.97 1.78 BS1806-383, AS568-383
62
SAE AS568 American Standard O-ring sizes Le Joint Franais 'R' O-ring sizes
BS1806 British Standard O-ring sizes (imperial) ISO3601 International Organisation for
BS4518 British Standard O-ring sizes (metric) Standardisation O-ring sizes (General purpose)
O-ring sizes
Tolerance +/- (mm)
Internal Diameter
Internal Diameter
Internal Diameter
Size Reference
Size Reference
Cross Section
Cross Section
(mm)
(mm)
380.37 1.78 BS1806-384, AS568-384 459.30 2.00 BS4518 4593-57
405.26 1.91 BS1806-385, AS568-385 479.30 2.00 5.70 BS4518 4793-57
430.66 2.03 BS1806-386, AS568-386 489.30 2.00 +/- 0.12 BS4518 4893-57
456.06 2.16 BS1806-387, AS568-387 499.30 2.00 BS4518 4993-57
481.46 2.29 BS1806-388, AS568-388
506.86 2.41 BS1806-389, AS568-389 113.67 0.84 BS1806-425, AS568-425, R53
5.33
532.26 2.41 +/- 0.13 BS1806-390, AS568-390 116.84 0.84 BS1806-426, AS568-426, R54
557.66 2.54 BS1806-391, AS568-391 120.02 0.84 BS1806-427, AS568-427, R55
582.68 2.67 BS1806-392, AS568-392 123.19 0.84 BS1806-428, AS568-428, R56
608.08 2.79 BS1806-393, AS568-393 126.37 0.94 BS1806-429, AS568-429, R57
633.48 2.92 BS1806-394, AS568-394 129.54 0.94 BS1806-430, AS568-430, R58
132.72 0.94 BS1806-431, AS568-431, R59
658.88 3.05 BS1806-395, AS568-395
135.89 0.94 BS1806-432, AS568-432, R60
44.30 0.30 BS4518 0443-57 139.07 0.94 BS1806-433, AS568-433, R61
45.30 0.30 BS4518 0453-57 142.24 0.94 BS1806-434, AS568-434, R62
49.30 0.30 BS4518 0493-57 145.42 0.94 BS1806-435, AS568-435, R63
52.30 0.40 BS4518 0523-57 148.59 0.94 BS1806-436, AS568-436, R64
54.30 0.40 BS4518 0543-57 151.77 0.94 BS1806-437, AS568-437, R65
55.30 0.40 BS4518 0553-57 158.12 1.02 BS1806-438, AS568-438, R66
59.30 0.40 BS4518 0593-57 164.47 1.02 BS1806-439, AS568-439, R67
62.30 0.40 BS4518 0623-57 170.82 1.02 BS1806-440, AS568-440, R68
64.30 0.40 BS4518 0643-57 177.17 1.02 BS1806-441, AS568-441, R69
69.30 0.40 BS4518 0693-57 183.52 1.14 BS1806-442, AS568-442, R70
74.30 0.40 BS4518 0743-57 189.87 1.14 BS1806-443, AS568-443, R71
79.30 0.40 BS4518 0793-57 196.22 1.14 BS1806-444, AS568-444, R72
84.30 0.50 BS4518 0843-57 202.57 1.14 BS1806-445, AS568-445, R73
89.30 0.50 BS4518 0893-57 215.27 1.40 BS1806-446, AS568-446, R74
94.30 0.50 BS4518 0943-57 227.97 1.40 BS1806-447, AS568-447, R75
99.30 0.50 BS4518 0993-57 240.67 1.40 BS1806-448, AS568-448, R76
104.30 0.50 BS4518 1043-57 253.37 1.40 BS1806-449, AS568-449, R77
109.30 0.50 BS4518 1093-57 6.99
266.07 1.52 BS1806-450, AS568-450, R78
+/- 0.15
114.30 0.50 BS4518 1143-57 278.77 1.52 BS1806-451, AS568-451, R79
119.30 0.50 BS4518 1193-57 291.47 1.52 BS1806-452, AS568-452, R80
124.30 0.60 BS4518 1243-57 304.17 1.52 BS1806-453, AS568-453, R81
129.30 0.60 BS4518 1293-57 316.87 1.52 BS1806-454, AS568-454, R82
134.30 0.60 BS4518 1343-57 329.57 1.52 BS1806-455, AS568-455, R83
139.30 0.60 BS4518 1393-57 342.27 1.78 BS1806-456, AS568-456, R84
144.30 0.60 BS4518 1443-57 354.97 1.78 BS1806-457, AS568-457, R85
149.30 0.60 BS4518 1493-57 367.67 1.78 BS1806-458, AS568-458, R86
154.30 0.60 BS4518 1543-57 380.37 1.78 BS1806-459, AS568-459, R87
5.70
159.30 0.60 +/- 0.12 BS4518 1593-57 393.07 1.78 BS1806-460, AS568-460, R88
164.30 0.60 BS4518 1643-57 405.26 1.91 BS1806-461, AS568-461
169.30 0.60 BS4518 1693-57 417.96 1.91 BS1806-462, AS568-462
174.30 0.60 BS4518 1743-57 430.66 2.03 BS1806-463, AS568-463
179.30 0.60 BS4518 1793-57 443.36 2.16 BS1806-464, AS568-464
184.30 0.80 BS4518 1843-57 456.06 2.16 BS1806-465, AS568-465
189.30 0.80 BS4518 1893-57 468.76 2.16 BS1806-466, AS568-466
194.30 0.80 BS4518 1943-57 481.46 2.29 BS1806-467, AS568-467
199.30 0.80 BS4518 1993-57 494.16 2.29 BS1806-468, AS568-468
209.30 0.80 BS4518 2093-57 506.86 2.41 BS1806-469, AS568-469
219.30 0.80 BS4518 2193-57 532.26 2.41 BS1806-470, AS568-470
229.30 0.80 BS4518 2293-57 557.66 2.54 BS1806-471, AS568-471
239.30 0.80 BS4518 2393-57 582.68 2.67 BS1806-472, AS568-472
249.30 0.80 BS4518 2493-57 608.08 2.79 BS1806-473, AS568-473
259.30 1.00 BS4518 2593-57 633.48 2.92 BS1806-474, AS568-474
269.30 1.00 BS4518 2693-57
658.88 3.05 BS1806-475, AS568-475
279.30 1.00 BS4518 2793-57
289.30 1.00 BS4518 2893-57 109.00 0.89 ISO3601-G
299.30 1.00 BS4518 2993-57 112.00 0.91 ISO3601-G
309.30 1.50 BS4518 3093-57 115.00 0.93 ISO3601-G
319.30 1.50 BS4518 3193-57 118.00 0.95 ISO3601-G
339.30 1.50 BS4518 3393-57 122.00 0.97 ISO3601-G
7.00
359.30 1.50 BS4518 3593-57 125.00 0.99 +/- 0.15 ISO3601-G
379.30 1.50 BS4518 3793-57 128.00 1.01 ISO3601-G
389.30 1.50 BS4518 3893-57 132.00 1.04 ISO3601-G
399.30 1.50 BS4518 3993-57 136.00 1.07 ISO3601-G
419.30 2.00 BS4518 4193-57 140.00 1.09 ISO3601-G
439.30 2.00 BS4518 4393-57 142.50 1.11 ISO3601-G
63
SAE AS568 American Standard O-ring sizes Le Joint Franais 'R' O-ring sizes
BS1806 British Standard O-ring sizes (imperial) ISO3601 International Organisation for
BS4518 British Standard O-ring sizes (metric) Standardisation O-ring sizes (General purpose)
O Ring Sizes
Internal Diameter
Internal Diameter
Internal Diameter
Size Reference
Size Reference
Cross Section
Cross Section
(mm)
(mm)
145.00 1.13 ISO3601-G 406.00 2.82 ISO3601-G
147.50 1.14 ISO3601-G 412.00 2.85 ISO3601-G
150.00 1.16 ISO3601-G 418.00 2.89 ISO3601-G
152.50 1.18 ISO3601-G 425.00 2.93 ISO3601-G
155.00 1.19 ISO3601-G 429.00 2.96 ISO3601-G
157.50 1.21 ISO3601-G 433.00 2.99 ISO3601-G
160.00 1.23 ISO3601-G 437.00 3.01 ISO3601-G
162.50 1.24 ISO3601-G 443.00 3.05 ISO3601-G
165.00 1.26 ISO3601-G 450.00 3.09 ISO3601-G
167.50 1.28 ISO3601-G 456.00 3.13 ISO3601-G
170.00 1.29 ISO3601-G 462.00 3.17 ISO3601-G
172.50 1.31 ISO3601-G 466.00 3.19 ISO3601-G
175.00 1.33 ISO3601-G 470.00 3.22 ISO3601-G
177.50 1.34 ISO3601-G 475.00 3.25 ISO3601-G
180.00 1.36 ISO3601-G 479.00 3.28 ISO3601-G
182.50 1.38 ISO3601-G 483.00 3.30 ISO3601-G
185.00 1.39 ISO3601-G 487.00 3.33 ISO3601-G
187.50 1.41 ISO3601-G 493.00 3.36 ISO3601-G
190.00 1.43 ISO3601-G 500.00 3.41 ISO3601-G
508.00 3.46 7.00 ISO3601-G
195.00 1.46 ISO3601-G
+/- 0.15
200.00 1.49 ISO3601-G 515.00 3.50 ISO3601-G
203.00 1.51 ISO3601-G 523.00 3.55 ISO3601-G
206.00 1.53 ISO3601-G 530.00 3.60 ISO3601-G
212.00 1.57 ISO3601-G 538.00 3.65 ISO3601-G
218.00 1.61 ISO3601-G 545.00 3.69 ISO3601-G
224.00 1.65 ISO3601-G 553.00 3.74 ISO3601-G
227.00 1.67 ISO3601-G 560.00 3.78 ISO3601-G
230.00 1.69 ISO3601-G 570.00 3.85 ISO3601-G
236.00 1.73 ISO3601-G 580.00 3.91 ISO3601-G
239.00 1.75 ISO3601-G 590.00 3.97 ISO3601-G
243.00 1.77 ISO3601-G 600.00 4.03 ISO3601-G
250.00 1.82 ISO3601-G 608.00 4.08 ISO3601-G
254.00 1.84 ISO3601-G 615.00 4.12 ISO3601-G
7.00 623.00 4.17 ISO3601-G
258.00 1.87 ISO3601-G
+/- 0.15 630.00 4.22 ISO3601-G
261.00 1.89 ISO3601-G
265.00 1.91 ISO3601-G 640.00 4.28 ISO3601-G
268.00 1.92 ISO3601-G 650.00 4.34 ISO3601-G
272.00 1.96 ISO3601-G 660.00 4.40 ISO3601-G
276.00 1.98 ISO3601-G 670.00 4.47 ISO3601-G
280.00 2.01 ISO3601-G 144.10 0.60 BS4518 1441-84
283.00 2.03 ISO3601-G 149.10 0.60 BS4518 1491-84
286.00 2.05 ISO3601-G 154.10 0.60 BS4518 1541-84
290.00 2.08 ISO3601-G 159.10 0.60 BS4518 1591-84
295.00 2.11 ISO3601-G 164.10 0.60 BS4518 1641-84
300.00 2.14 ISO3601-G 169.10 0.60 BS4518 1691-84
303.00 2.16 ISO3601-G 174.10 0.60 BS4518 1741-84
307.00 2.19 ISO3601-G 179.10 0.60 BS4518 1791-84
311.00 2.21 ISO3601-G 184.10 0.80 BS4518 1841-84
315.00 2.24 ISO3601-G 189.10 0.80 8.40 BS4518 1891-84
320.00 2.27 ISO3601-G +/- 0.15
194.10 0.80 BS4518 1941-84
325.00 2.30 ISO3601-G 199.10 0.80 BS4518 1991-84
330.00 2.33 ISO3601-G 204.10 0.80 BS4518 2041-84
335.00 2.36 ISO3601-G 209.10 0.80 BS4518 2091-84
340.00 2.40 ISO3601-G 219.10 0.80 BS4518 2191-84
345.00 2.43 ISO3601-G 229.10 0.80 BS4518 2291-84
350.00 2.46 ISO3601-G 234.10 0.80 BS4518 2341-84
355.00 2.49 ISO3601-G 239.10 0.80 BS4518 2391-84
360.00 2.52 ISO3601-G 249.10 0.80 BS4518 2491-84
365.00 2.56 ISO3601-G
370.00 2.59 ISO3601-G
375.00 2.62 ISO3601-G
379.00 2.64 ISO3601-G
383.00 2.67 ISO3601-G
387.00 2.70 ISO3601-G
391.00 2.72 ISO3601-G
395.00 2.75 ISO3601-G
400.00 2.78 ISO3601-G
64
Index AI
O RingAZ
Index
3-A Sanitary Standards Inc. 21 Elastomer material types 14
Sizes
Abrasion 48 Elongation 47
Accelerated ageing 50 Embrittlement and hardening 50
ACM 14 EPDM 15
Acrylonitrile Butadine 16 Epichlorohydrin 14
Approvals 19 Extrusion 53
AS4716 groove sizes for piston and rod seals 52 Face seals 52
AS568 O-ring sizes 52, 57 Failure analysis 7
ASTM D1418 material designations 14 FCN (Food Contact Notification) 21
AU 14 FDA (Food & Drug Administration) 20
65
Index AZ
Index IZ
Polyisoprene 16 VMQ 17
Polytetrafluoroethylene 17 Volume change 51
Potable Water 21 Volume loss 49, 50
Powder Generation 19 Water grade seals 21
Pressure 53 Wear 48
66
Notes
Corporate Brochure
Elastomer Technical Guide & Chemical Compatibility
Food and Pharmaceutical
Perlast General
Perlast Semiconductor
Diesel Engines
DE
EN
ES
FR
Tel: +44 (0) 1254 295400 Tel: +44 (0) 1254 295400
Fax: +44 (0) 1254 680182 Fax: +44 (0) 1254 680182
Email: info@perlast.com Email: sales@prepol.com
www.perlast.com www.prepol.com
05/06