Professional Documents
Culture Documents
Tensile Strength (lbs): 1,076,820 1,020,298 964,058 852,424 Upset Type: IEU Fluid Capacity w/o IPC (gal/ft): 1.41
Torsional Strength (ft-lbs): 155,276 147,051 138,877 122,685 Max Upset OD (in): 6.906 Fluid Capacity w/o IPC (bbls/ft): 0.0336
Drift Size (in): 5.125
Burst Capacity (psi): 14,383 15,616 14,794 13,150
Collapse Capacity (psi): 6,391 5,567 4,782 3,429
18
0
Note: These are OEM values that may vary with actual values due to mill tolerances, IPC tolerances, OEM rounding, and other
Notes: Body properties are calculated based on uniform OD and wall thickness. factors. Pipe is purchased at a guaranteed 95% RBW. IPC is applied to a nominal thickness of 0.009''.
Burst capacity for Nominal (100% RBW) based on 87.5% RBW per API.
The technical information containted herein, including the product performance sheet and other attached documents, has been extracted from information available from the manufacturer and is for reference only and not a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical
information. Workstrings International cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various
inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operation limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices,
and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box IDs, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.
www.workstringsinternational.com 08-Sep-15
Download the Workstrings International Pipe Specification App on the App Store or Google Play
Performance Datasheet Size: 6-5/8" IEU x 25.20 lbs/ft
Connection: VAM Express VX69 BP Liberty
Drill Pipe Pipe grade: VM-165 DP
Range: 2
2,000,000
1,500,000
Tension (lbs)
1,000,000
500,000
0
0 50,000 100,000 150,000 200,000
Torque (ft-lbs)
NEW,RBW,PREMIUM Drill Pipe NEW Tool Joint NEW Recommended Make-up Torque*
180,000
160,000
Tool Joint Makeup Torque (ft-lbs)
140,000
Pipe Yield Torque,
120,000
100,000
80,000
60,000
40,000
20,000
0
8-5/8 8-1/2 8-3/8 8-1/4 8-1/8 8 7-7/8 7-3/4
NEW,RBW,PREMIUM Drill Pipe NEW Tool Joint NEW,Min Allowed Tool Joint
OD (in)
All data nominal and calculated per standard methods. Vallourec Drilling Products does not assume responsibility for results obtained
through the use of this information. No warranty expressed or implied.
TTO: V10.5b - DP: V1, 2015/02/20, 6625 0.330 VM-165 DP VAM Express VX69 BP Liberty 8500 5250 2 135
Vallourec group