Professional Documents
Culture Documents
330'' wall IU
Grade: VM-150
Drill Pipe Performance Sheet Range: 2
Asset Number: WS38-20 Tool Joint: 5.250'' x 2.750'' VX40
Tensile Strength (lbs): 570,717 539,744 509,027 448,363 Upset Type: IU Fluid Capacity w/o IPC (gal/ft): 0.44
Torsional Strength (ft-lbs): 46,575 43,984 41,423 36,392 Max Upset OD (in): 4.188 Fluid Capacity w/o IPC (bbls/ft): 0.0105
Drift Size (in): 2.625
Burst Capacity (psi): 21,656 23,513 22,275 19,800
Collapse Capacity (psi): 21,912 20,174 18,407 14,782
18
0
Note: These are OEM values that may vary with actual values due to mill tolerances, IPC tolerances, OEM rounding, and other
Notes: Body properties are calculated based on uniform OD and wall thickness. factors. Pipe is purchased at a guaranteed 95% RBW. IPC is applied to a nominal thickness of 0.009''.
Burst capacity for Nominal (100% RBW) based on 87.5% RBW per API.
The technical information containted herein, including the product performance sheet and other attached documents, has been extracted from information available from the manufacturer and is for reference only and not a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical
information. Workstrings International cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various
inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operation limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices,
and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box IDs, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.
www.workstringsinternational.com 08-Sep-15
Download the Workstrings International Pipe Specification App on the App Store or Google Play
Performance Datasheet Size: 4" IU x 14.00 lbs/ft
Connection: VAM Express VX40
Drill Pipe Pipe grade: VM-150 DP
Range: 2
1,000,000
800,000
Tension (lbs)
600,000
400,000
200,000
0
0 10,000 20,000 30,000 40,000 50,000 60,000
Torque (ft-lbs)
NEW,RBW,PREMIUM Drill Pipe NEW Tool Joint NEW Recommended Make-up Torque*
50,000
45,000
Tool Joint Makeup Torque (ft-lbs)
40,000
35,000
Pipe Yield Torque,
30,000
25,000
20,000
15,000
10,000
5,000
0
5-3/8 5-1/4 5-1/8 5 4-7/8
NEW,RBW,PREMIUM Drill Pipe NEW Tool Joint NEW,Min Allowed Tool Joint
OD (in)
All data nominal and calculated per standard methods. Vallourec Drilling Products does not assume responsibility for results obtained
through the use of this information. No warranty expressed or implied.
TTO: V10.5b - DP: V1, 2015/02/13, 4000 0.330 VM-150 DP VAM Express VX40 5250 2750 2 135
Vallourec group