Professional Documents
Culture Documents
Quality Documentation
Package
Grant Prideco
NAVASOTA, TX, USA
www.nov.com/GrantPrideco/CustomerFeedback
Table of Contents
Item # Title
1 Performance Characteristics Sheet
2 Certificate of Compliance
5 Certificate of Hardband
8 Mill Certificates
11 Export Classification
Heavy Weight Drill Pipe Performance Sheet
www.NOV.com/GrantPrideco Phone: +1 (281) 878-8000
HWDP Configuration
Pipe Body OD (in) 6.625 Friction Factor 1.0
Pipe Body ID (in) 4.500 Wall Thickness (in) 1.063
Heavy Weight Type Tri-Spiral Approximate Length (ft) 31.0
Pipe Body Grade Standard 1340 Pipe Body SMYS (psi) 55,000
Connection 6-5/8 FH SmoothEdge Height (in) 3/32 Raised
Connection OD (in) 8.250 Tool Joint SMYS (psi) 120,000
Connection ID (in) 4.500 Max Upset OD (DTE) (in) 6.906
Pin Tong (in) 27 Number of Wearpads 3
Box Tong (in) 27 Wearpad Length (per Wearpad) (in) 26
Note: Tong space may include hardfacing.
Best Estimates
Performance of HWDP Assembly Drill Pipe Adjusted Weight (lbs/ft) 78.34
Applied Make-up Operational Torque Max Tension
Torque (lbs) Fluid Displacement (gal/ft) 1.20
(ft-lbs) (ft-lbs)
Fluid Displacement (Bbls/ft) 0.0285
0 1,021,200
Maximum MUT 58,300 Fluid Capacity (gal/ft) 0.83
58,000 891,300
Fluid Capacity (Bbls/ft) 0.0197
0 1,021,200 Drift Size (in) 4.250
Minimum MUT 48,600
48,300 933,100 Note: Oil field barrel equals 42 US gallons.
Note: Drill pipe assembly values are best estimates and may vary due to pipe body mill tolerance, internal plastic coating, and other factors.
Pipe Body Slip Crushing Capacity Pipe Body Configuration ( 6.625 (in) OD 4.500 (in) ID 55,000 (psi) )
Nominal
Slip Crushing Capacity (lbs) 638,900
Note: Slip Crushing: Slip crushing load is calculated with the Spiri-Reinhold equation from “Why Does Drill Pipe
Assumed Slip Length (in) 16.5 Fail in the Slip Area” World Oil, 1959 for the slip length and transverse load factor shown and is for reference
only. Slip crushing is dependent on the slip design and condition, coefficient of friction, loading conditions, time in
Transverse Load Factor (K) 4.2 slips, drill pipe OD and wall variation, and other factors. Consult with the slip manufacturer for additional
information.
Pipe Body Performance Pipe Body Configuration ( 6.625 (in) OD 4.500 (in) ID 55,000 (psi) )
Nominal
Pipe Tensile Strength (lbs) 1,021,200
Pipe Torsional Strength (ft-lbs) 118,800
TJ/PipeBody Torsional Ratio 0.82
80% Pipe Torsional Strength (ft-lbs) 95,100
Burst (psi) 15,436 Note: Nominal Burst calculated at 87.5% RBW per API.
Pipe Body Pipe Body OD (in) 6.625 Pipe Body ID (in) 4.500 Pipe Body SMYS (psi) 55,000
Operational Assembly Pipe Body Connection Max Operationa Assembly Pipe Body Connection
l Torque Max Tension Max Tension
Torque Max Tension Max Tension Tension Max Tension
(ft-lbs) (lbs) (lbs) (lbs) (ft-lbs) (lbs) (lbs) (lbs)
Connection
Make-up Torque Range
Make-up Torque Connection Max
(ft-lbs) Tension (lbs)
Min MUT 48,600 1,777,400
49,700 1,817,600
50,800 1,857,900
51,800 1,846,200
52,900 1,801,500
54,000 1,756,800
55,100 1,712,100
56,100 1,671,400
57,200 1,626,700
Rec MUT 58,300 1,581,900
Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close to Recommended MUT as possible.
Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully
responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied
warranty is intended. HWDP assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. It is the responsibility of the customer and the end user to determine the
appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box
ID’s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.
Connection
Wear
Tool Connection Max Connection Max Min MUT Connection Max
Torsional Tension Tension
New OD Joint OD MUT
(in) Strength (ft-lbs) (ft-lbs) (lbs) (ft-lbs) (lbs)
Note for API Connections: Tension at shoulder separation and Tension at connection failure may fluctuate as OD
decreases due to Recommended make-up toqure exceeding T4.
Pipe Body
Combined Loading Table (Torque-Tension)
Pipe Body Pipe Body OD (in) 6.625 Pipe Body ID (in) 4.500 Pipe Body SMYS (psi) 55,000
Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully
responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied
warranty is intended. HWDP assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. It is the responsibility of the customer and the end user to determine the
appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box
ID’s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.
This hereby certifies that NOV Grant Prideco has met or exceeded the manufacturing
and quality requirements of the above referenced specification(s) in manufacturing
the following below described material for: NABORS SHARED SERVICE CENTER
09/22/2015
NOV Grant Prideco Representative Date
09/22/2015
NOV Grant Prideco Representative Date
09/22/2015
NOV Grant Prideco Representative Date
09/22/2015
NOV Grant Prideco Representative Date
09/22/2015
NOV Grant Prideco Representative Date
TIMKEN Product N7072 0.4100 1.7800 0.0140 0.0070 0.2600 0.2700 0.0900 0.1000 0.0200 0.0000 0.0000 0.0360
All properties meet the requirements of API Specification 7-1, Addendum 1 dtd March 2007, NOV Grant Prideco Spec 351, Rev. 8 dated August 2, 2010. I certify that these tests were
conducted in accordance with applicable specifications and that the data contained herein is true and correct.
9/22/2015
Description: HWDP - WELDED 6.625 IN X 4.5 IN TRI-SPIRAL TYPE STANDARD HW GRADE RANGE 2
6-5/8 FH 8.25 IN X 4.5 IN X 27.0 IN (PIN) X 27.0 IN (BOX) M&B TCS-8000 TK-34P PRESSED
STEEL
(GRADE TUBE:1340 HW TOOL JOINTS:4145M)
Certificate of Testing for Pin Tool Joints
Mill Chemistry
Mill Type Heat No. Heat Code C Mn P S Si Cu Ni Cr Mo V B Al
TIMKEN Product N5043 0.4500 1.0600 0.0120 0.0090 0.2800 0.1700 0.1600 1.1200 0.3000 0.0000 0.0000 0.0280
TIMKEN Product N5109 0.4700 1.0800 0.0120 0.0100 0.2800 0.1600 0.1600 1.1400 0.3100 0.0000 0.0000 0.0440
9/22/2015
Description: HWDP - WELDED 6.625 IN X 4.5 IN TRI-SPIRAL TYPE STANDARD HW GRADE RANGE 2
6-5/8 FH 8.25 IN X 4.5 IN X 27.0 IN (PIN) X 27.0 IN (BOX) M&B TCS-8000 TK-34P PRESSED
STEEL
(GRADE TUBE:1340 HW TOOL JOINTS:4145M)
Certificate of Testing for Box Tool Joints
Mill Chemistry
Mill Type Heat No. Heat Code C Mn P S Si Cu Ni Cr Mo V B Al
TIMKEN Product N5043 0.4500 1.0600 0.0120 0.0090 0.2800 0.1700 0.1600 1.1200 0.3000 0.0000 0.0000 0.0280
Mechanical Test Data
Specimen Position Size Heat No. Heat Code Tensile PSI Yield PSI Elong % RA % BHN
Heavy Weight-Box 14 R BOX 0.500 N5043 153,500 134,349 17.80 55.99 331
Heavy Weight-Box 1R BOX 0.500 N5043 154,020 136,059 17.65 53.99 335
140 KSI MIN 120 MIN 13 % MIN 285-341
9/22/2015
Description: HWDP - WELDED 6.625 IN X 4.5 IN TRI-SPIRAL TYPE STANDARD HW GRADE RANGE 2
6-5/8 FH 8.25 IN X 4.5 IN X 27.0 IN (PIN) X 27.0 IN (BOX) M&B TCS-8000 TK-34P PRESSED
STEEL
(GRADE TUBE:1340 HW TOOL JOINTS:4145M)
Certificate of Testing for Weld Area
Mechanical Test Data
Specimen Position Size Tensile PSI Yield PSI Elong % RA %
All properties meet the requirements of API Specification 7-1, Addendum 1 dtd March 2007. I certify that these tests were conducted in accordance with applicable specifications and
that the data contained herein is true and correct.
9/22/2015
Description: HWDP - WELDED 6.625 IN X 4.5 IN TRI-SPIRAL TYPE STANDARD HW GRADE RANGE 2
6-5/8 FH 8.25 IN X 4.5 IN X 27.0 IN (PIN) X 27.0 IN (BOX) M&B TCS-8000 TK-34P PRESSED
STEEL
(GRADE TUBE:1340 HW TOOL JOINTS:4145M)
Page 1 of 1
Serialization Log
Pin Serial Pin Heat Tube Serial Tube Heat Box Serial Box Heat Length
Number Number Number Number Number Number
241424 N5043 176901N N7072 241426 N5043 31.80
241424 N5043 176902N N7072 241426 N5043 31.80
241424 N5043 176903N N7072 241426 N5043 31.80
241436 N5043 176904N N7072 241420 N5043 31.80
241436 N5043 176905N N7072 241429 N5043 31.80
241430 N5043 176906N N7072 241432 N5043 31.80
241430 N5043 176907N N7072 241435 N5043 31.80
241430 N5043 176908N N7072 241433 N5043 31.80
241441 N5109 176909N N7072 241420 N5043 31.80
241429 N5043 176910N N7072 241436 N5043 31.80
241430 N5043 176911N N7072 241435 N5043 31.80
241441 N5109 176912N N7072 241420 N5043 31.80
241424 N5043 176913N N7072 241425 N5043 31.80
241434 N5043 176914N N7072 241436 N5043 31.80
241420 N5043 176915N N7072 241420 N5043 31.80
241432 N5043 176917N N7072 241430 N5043 31.80
241436 N5043 176918N N7072 241436 N5043 31.80
241432 N5043 176919N N7072 241434 N5043 31.80
241432 N5043 176920N N7072 241425 N5043 31.80
241435 N5043 176922N N7072 241422 N5043 31.80
241424 N5043 176923N N7072 241425 N5043 31.80
241429 N5043 176925N N7072 241435 N5043 31.80
241429 N5043 176926N N7072 241430 N5043 31.80
241433 N5043 176927N N7072 241433 N5043 31.80
241433 N5043 176928N N7072 241434 N5043 31.80
241434 N5043 176929N N7072 241424 N5043 31.80
Description: HWDP - WELDED 6.625 IN X 4.5 IN TRI-SPIRAL TYPE STANDARD HW GRADE RANGE 2
6-5/8 FH 8.25 IN X 4.5 IN X 27.0 IN (PIN) X 27.0 IN (BOX) M&B TCS-8000 TK-34P PRESSED
STEEL
(GRADE TUBE:1340 HW TOOL JOINTS:4145M)
SOLID BAR ULTRASONIC INSPECTION REPORT
Page 1 of 1
CUSTOMER S/O ORDER
GRANT PRIDECO INVENTORY 291426
#OF PIECES SIZE WEIGHT
SOLID BAR
18 8.5”
TUBULAR GOODS RANGE TYPE INSPECTION
INSPECTED RANDOM SOLID BAR FLUT
TYPE INSPECTION
3700”
17 LENGTH-BANDED ORANGE (ACCEPTED LENGTH) FOOTAGE:
1 36”
LENGTH-BANDED YELLOW/RED (REJECT/PAR) FOOTAGE:
LENGTH-BANDED FOOTAGE:
LENGTH-BANDED FOOTAGE:
3736”
18 TOTAL LENGTHS INSPECTED TOTAL FOOTAGE:
COMMENTS
Serial Number Range 241437 - 241454 is heat number N5109. This material was used to manufacture the Tool Joints for 10000729-1
Page 1 of 1
CUSTOMER S/O ORDER
GRANT PRIDECO INVENTORY 291425
#OF PIECES SIZE WEIGHT
SOLID BAR
18 8.5”
TUBULAR GOODS RANGE TYPE INSPECTION
INSPECTED RANDOM SOLID BAR FLUT
TYPE INSPECTION
3927
18 LENGTH-BANDED ORANGE (ACCEPTED LENGTH) FOOTAGE:
LENGTH-BANDED FOOTAGE:
LENGTH-BANDED FOOTAGE:
3927
18 TOTAL LENGTHS INSPECTED TOTAL FOOTAGE:
COMMENTS
Serial Number Range 241419 - 241436 is heat number N5043. This material was used to manufacture the Tool Joints for 10000729-1
ECCN #: 8431.43.8040
HTS #: EAR99
SCHEDULE B: 8431.43.8010
COUNTRY OF ORIGIN: USA
All ECCN and HTS classification information received from National Oilwell Varco (NOV) is for informational
purposes only and shall not be constructed as NOV's representation, certification or warranty regarding the
proper classification. Use of such classification information is at the Buyer's sole risk and without recourse
to NOV. The Buyer is responsible for determining the correct classifications of all items prior to export and
Buyer shall make its own export licensing determinations.
09/22/2015
NOV Grant Prideco Representative Date