Professional Documents
Culture Documents
STREAM No.
SYMBOL
PIPING TEMPERATURE (°C) PRESSURE (BAR G)
FLUID COMPOSITION (MOLE%)
CLASS AS PER DATASHEET SUPPLIER PROPOSED SEAL & SEAT REQUIREMENTS
S.No
OPERATING DESIGN DESIGN
OPERATING
PROCESS PROCESS CLASS PROCESS CLASS
Seal Material Seat Material GWC Proposed GWC Proposed VIRGO VALVES VIAR VALVOLE VIAR VALVOLE STAR LINE Proposed STAR LINE JIANGSU JIANGSU Proposed
VIRGO VALVES Proposed Seal Remarks
@ MAX @ MIN Required Required Seal Seats Proposed Seats Proposed Seal Proposed Seats Seal Proposed Seat Proposed Seal Seats
MAX. MIN. MAX MIN MAX MIN MAX. MAX. TEMP TEMP
Water = 2.08 Mol%
CO2 = 5.94 Mol%
H2S = 11.46 ppmV
1 Process Gas PG 119/120 Mercaptan = 0.99 ppmV 1N1 60 25 140 -46 150 -50 9 15.5 15.8 20 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
Mercury in gas = 35 microgram/Nm3
1 of 5
ALRAR INLET SEPARATION AND BOOSTING FACILITIES
SEAL & SEAT MATERIX
Rev: 1
Date: 27.06.2014
STREAM No.
SYMBOL
PIPING TEMPERATURE (°C) PRESSURE (BAR G)
FLUID COMPOSITION (MOLE%)
CLASS AS PER DATASHEET SUPPLIER PROPOSED SEAL & SEAT REQUIREMENTS
S.No
OPERATING DESIGN DESIGN
OPERATING
PROCESS PROCESS CLASS PROCESS CLASS
Seal Material Seat Material GWC Proposed GWC Proposed VIRGO VALVES VIAR VALVOLE VIAR VALVOLE STAR LINE Proposed STAR LINE JIANGSU JIANGSU Proposed
VIRGO VALVES Proposed Seal Remarks
@ MAX @ MIN Required Required Seal Seats Proposed Seats Proposed Seal Proposed Seats Seal Proposed Seat Proposed Seal Seats
MAX. MIN. MAX MIN MAX MIN MAX. MAX. TEMP TEMP
Water = 2.6 Mol%
CO2 = 4.45 Mol%
H2S = 4.8 ppmV
Mercaptan = 0.66 Mol%
Mercury in gas = 35 microgram/Nm3
Mercury in Condensate = 30.7 microgram/Litre
ALRAR OUEST Presence of Sand
12 Process Liquid PL Corrosion Inhibitor 15N1 80 25 100 -46 150 -46 32.5 153 136.3 165 VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK VITON GLT AED PEEK VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK
Pipeline Fluid
Chloride in Water = 300 mg/lit (Continuous Chloride
content)
Dehydrated Fluid
14 MultiPhase HC / Water PH CO2 = 4.9 Mol% 3A3 70 -19 90 -29 150 -29 9.2 33 45.1 51.1 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
Dehydrated Fluid
20 Process Volatile PV CO2 = 4.9 Mol% 1A3 60 90 -29 150 -29 6.2 7.5 15.8 19.6 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
Dehydrated Fluid
22 Process Volatile PV CO2 = 4.9 Mol% 3A3 70 -19 90 -29 150 -29 26 33 45.1 51.1 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
2 of 5
ALRAR INLET SEPARATION AND BOOSTING FACILITIES
SEAL & SEAT MATERIX
Rev: 1
Date: 27.06.2014
STREAM No.
SYMBOL
PIPING TEMPERATURE (°C) PRESSURE (BAR G)
FLUID COMPOSITION (MOLE%)
CLASS AS PER DATASHEET SUPPLIER PROPOSED SEAL & SEAT REQUIREMENTS
S.No
OPERATING DESIGN DESIGN
OPERATING
PROCESS PROCESS CLASS PROCESS CLASS
Seal Material Seat Material GWC Proposed GWC Proposed VIRGO VALVES VIAR VALVOLE VIAR VALVOLE STAR LINE Proposed STAR LINE JIANGSU JIANGSU Proposed
VIRGO VALVES Proposed Seal Remarks
@ MAX @ MIN Required Required Seal Seats Proposed Seats Proposed Seal Proposed Seats Seal Proposed Seat Proposed Seal Seats
MAX. MIN. MAX MIN MAX MIN MAX. MAX. TEMP TEMP
Water = 0.18 to 100 Mol%
CO2 = 4.65 Mol%
H2S = 5.34 ppmV
Mercaptan = 3.39 ppmV
Mercury in Condensate = 30.7 microgram/Litre
208/215/217/227 Chloride in Water = 300 mg/lit for Stream 208/227/228
25 Process Volatile PV 6N1 90 25 140 -46 150 -46 76 91 91.9 103.4 VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK VITON GLT AED PEEK VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK
/228 (out of these streams, 227/228 contains free water
content of <15 ppm [wt]).
Chlorides are not present in Stream 215/217.
Dehydrated gas.
32 Fuel Gas FG CO2 = 4.9 mol% 1A3 60 -2 90 -29 150 -29 6.2 7.5 15.8 19.6 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
Dehydrated gas.
32a Fuel Gas FG CO2 = 4.9 mol% 1B3 136 140 -46 150 -46 10 12 15.8 19.6 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
Dehydrated gas.
CO2 = 4.9 mol% 150
35 Fuel Gas FG 9A3 45 10 -29 150 -29 68 135.2 135.2 153.2 VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK VITON 'GLT' AED DEVLON VITON GLT AED PEEK VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK
(HOLD 1)
Dehydrated gas.
35a Fuel Gas FG Refer PID12353 CO2 = 4.9 mol% 9B2 45 -14 150 -46 175 -46 68 135.2 133.3 153.2 VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK VITON GLT AED PEEK VITON 'GLT' AED PEEK VITON 'GLT' AED PEEK
3 of 5
ALRAR INLET SEPARATION AND BOOSTING FACILITIES
SEAL & SEAT MATERIX
Rev: 1
Date: 27.06.2014
STREAM No.
SYMBOL
PIPING TEMPERATURE (°C) PRESSURE (BAR G)
FLUID COMPOSITION (MOLE%)
CLASS AS PER DATASHEET SUPPLIER PROPOSED SEAL & SEAT REQUIREMENTS
S.No
OPERATING DESIGN DESIGN
OPERATING
PROCESS PROCESS CLASS PROCESS CLASS
Seal Material Seat Material GWC Proposed GWC Proposed VIRGO VALVES VIAR VALVOLE VIAR VALVOLE STAR LINE Proposed STAR LINE JIANGSU JIANGSU Proposed
VIRGO VALVES Proposed Seal Remarks
@ MAX @ MIN Required Required Seal Seats Proposed Seats Proposed Seal Proposed Seats Seal Proposed Seat Proposed Seal Seats
MAX. MIN. MAX MIN MAX MIN MAX. MAX. TEMP TEMP
Water: 0.17 to 100 mol%
CO2: 5.94 mol%
H2S: 11.47 ppmv
40 High Pressure Flare VH Mercaptan: 3.39 ppmv 1A3 117 -29 140 -29 150 -29 10 12 15.8 19.6 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
Mercury: 35 microgram/Nm3 of gas
Mercury in condensate: 30.7 microgram/lit
44 Atmospheric Vent VA 1A3 AMB AMB 90 -5 150 -29 ATM 10.5 15.8 19.6 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
45 Atmospheric Vent VA 1A3 AMB AMB 90 -5 150 -29 ATM 10.5 15.8 19.6 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
49 Fire Water/AG WF 1A5 45 10 90 -5 100 -29 12 (HOLD) 16 17.7 19.6 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
Water
Refer Service Water Composition in Attachment 1
Chloride in Water = 128 mg/lit
19.6 BALL VALVE FLOATING IS NOT AVAILABLE IN
50 Fire Water/AG WF 1G3 45 10 90 -5 100 -29 12 (HOLD) 16 17.7 NA NA NA NA NA NA NA NA NA NA NA NA
THIS PIPE CLASS
4 of 5
ALRAR INLET SEPARATION AND BOOSTING FACILITIES
SEAL & SEAT MATERIX
Rev: 1
Date: 27.06.2014
STREAM No.
SYMBOL
PIPING TEMPERATURE (°C) PRESSURE (BAR G)
FLUID COMPOSITION (MOLE%)
CLASS AS PER DATASHEET SUPPLIER PROPOSED SEAL & SEAT REQUIREMENTS
S.No
OPERATING DESIGN DESIGN
OPERATING
PROCESS PROCESS CLASS PROCESS CLASS
Seal Material Seat Material GWC Proposed GWC Proposed VIRGO VALVES VIAR VALVOLE VIAR VALVOLE STAR LINE Proposed STAR LINE JIANGSU JIANGSU Proposed
VIRGO VALVES Proposed Seal Remarks
@ MAX @ MIN Required Required Seal Seats Proposed Seats Proposed Seal Proposed Seats Seal Proposed Seat Proposed Seal Seats
MAX. MIN. MAX MIN MAX MIN MAX. MAX. TEMP TEMP
Water: 0 to 100 Mol%
Mercury in condensate: 30.7 μg/l
Hazardous Open Presence of Sand BALL VALVE FLOATING IS NOT AVAILABLE IN
59 DH Chloride in Water = 300 mg/lit (Intermittant Chloride 1P1 60 10 90 -29 90 -5 6 8 13 14 NA NA NA NA NA NA NA NA NA NA NA NA
Drain / Under Ground THIS PIPE CLASS
content)
Oily water
Presence of Sand
Non-Hazardous Open Chloride in Water = 300 mg/lit (Intermittant Chloride
62 DN 1A6 AMB AMB 130 -29 150 -29 ATM 8 15.8 19.6 VITON 'GLT' AED RPTFE VITON 'GLT' AED RTFE VITON 'GLT' AED RTPFE VITON GLT AED RPTFE VITON 'GLT' AED RPTFE VITON 'GLT' AED RPTFE
Drain / Above Ground content)
Oily Water
Presence of Sand
Non-Hazardous Open BALL VALVE FLOATING IS NOT AVAILABLE IN
63 DN 1P1 AMB AMB 90 -5 90 -5 6 8 13 14 NA NA NA NA NA NA NA NA NA NA NA NA
Drain / Under Ground THIS PIPE CLASS
71 AFF Foam MF 1C1 45 10 90 -5 150 -98 9 (HOLD) 16 14.8 19 PTFE RPTFE PTFE RTFE PTFE LIP SEALS RTPFE PTFE LIP SEALS PEEK PTFE RPTFE PTFE RPTFE
Reference Documents:
1. Fluid List ReV.F3
5 of 5