Professional Documents
Culture Documents
CHINA
Add : Taiping Town, Xiangcheng District, Suzhou,
Jiangsu Province, China 215137
Tel : 86-512-88180808 65435543
Fax : 86-512-65431375
E-mail : qiu_weibin@douson.cn
Web : www.douson.cn
USA
10700 Richmond Ave., Suite 205
Houston, TX 77042 USA
Tel: 1.713.782.6613
API 6A VALVE
Fax: 1.713.782.6658
E-mail: douson@sbcglobal.net
01 02 03 04 05
DOUSON | VALVE
Manually DS-FRAC
Fracturing
Manually DS-FRAC Apply to high pressure and large bore fracturing environment
gate valve
DS-FRAC-
Hydraulically
Gate Valve HYD
thermal
gate valve
expansion type
slab gate valve
-
-
EG-20T
EG-20
DMV1
apply to high temperature service environment.
fixed
choke valve
-
-
DMV2
POS
apply to the high pressure service environment
where medium is mud.
apply to the service environment
where flow adjusting is not required.
Valve
pin type H2 generally mounted on X-mass tree.
Choke Valve
adjustable choke cage type(internal) MOS generally mounted on high pressure choke pipeline.
valve cage type(external) EXT generally mounted on high pressure choke pipeline.
Ball valve
trunnion mounted ball
floating ball
TB
FC
generally mounted on side outlet of casing head.
automatically controlled
double acting(membrane) -
at ultralow temperature service environment.
Design Specification
drift:1-13/16”~9” SG-10 gate valve can meet requirements in standard . The previous expanding
working pressure:2000psi~20000psi
'
temperature level:K~X wedge is replaced by rigid flat wedge. The medium, H2S material can be used in
material class:AA,BB,CC,DD,EE,FF,HH accordance with the latest NACE MR-01-75 specification.
product specification level:PS1~4
$
product performance rating:PR1~2
valve used in fracturing field valve used in drilling field casting steel valve body/forged valve bonnet
&
low operation torque
%
metal to metal valve body/valve bonnet seal
'
The switch of gate valve is wedge. The movement direction of wedge is perpendicular to flow direction. Gate valve can be only used simple and reliable structure, low cost
to fully open and fully close the choke rather than adjust and choke.There are two seal surfaces on wedge. The flat valve with two flange or thread connection
parallel seal surfaces is the most common flat gate valveI.
$
&
Type Code No. Application Advantages: %
Specifications
t4UBOEBSE.PEFM4(WBMWFNFFUTUIFSFRVSFNFOUTPGUIFMBUFTU
edition of API 6A.
t.BUFSJBMTGPS)2S service in accordance with NACE MR-01-75,
latest edition.
t"MMUFTUJOHJTJOBDDPSEBODFXJUIBDDPSEBODFXJUI"1*"MBUFTU
edition, Appendix F, Performance verification PR-2, temperature
class P thru X (-20 F to +350 F)
7-1/16" ⇛ ⇛ ⇛
Notes: Special trims are available on request.
Suzhou Douson Drilling& Production Equipment Co.,Lt
Lttd.
L ᔚࢷ᥋೨ᨛ᧔ܬᐧ͋దᬍНՃ
Gate Valve Gate Valve
DMV-1 mud valve is a gate valve with steel wedge, lifting valve stem and elastic seal.
The mud valve is mainly used for mud, cement, fracturing and water supply, which is
simple to operate and maintain. Connection Type of Valve Body, Valve Bonnet and Union
Flange connection type structure type dimension F
Advantages:
Working pressure
size A(mm) B(mm) C(mm) D(mm) E(mm) API ring weight(kg)
rating(psi)
I.online repair
2000 295.15 R-23 32
E
Valve bonnet can be easy to remove without dismantling valve from pipeline when
inner parts need checking and replacing. This kind of design allows simple operation 2" 3000 50.80 295.15 66.55 330.20 355.60 R-24 45
B
without special tool. 5000 307.85 R-24 50
D
C
II. Flexible and tidy supply
The material for valve stem, valve wedge, valve seat and elastic valve seat is selectable, Weld and thread end structure dimension
which can expand the range of valve application. With triple plastic coating in valve body
F
Working pressure
and valve bonnet, wearing resistance and corrosion resistance can be obtained. size
rating(psi)
A(mm) B(mm) C(mm) D(mm) E(mm) API ring weight(kg)
2000
III. Fast operation can be provided by dual lead thread design
E
2" 3000 50.80 228.60 66.55 330.20 355.60 - 26
1. ASME/ANSI serial dual lead thread design make valve stem install in wedge through
5000
valve stem and support assembly. This is designed as dual lead thread. Valve stem is well
B
3000
D
grinded. It possesses O-ring and extrusion proof seal. This kind of design can produce
2-1/2"×2" 50.80 228.60 66.55 330.20 355.60 - 26
economic and efficient result. 5000 C
2. DMV serial valve shall be designed as dual lead thread, the working pressure for valve
stem nut, support and valve stem are 2000psi, 3000psi and 5000psi respectively (4” or
larger valve with working pressure of 5000psi shall be designed as single lead thread and Union end structure dimension F
lifted by bearing transmission) . Working pressure
size A(mm) B(mm) C(mm) D(mm) E(mm) API ring weight(kg)
3. In the process of loading, the rising stem can protect stem thread. rating(psi)
4. Observation lens are equipped on 3000psi large valve and 5000psi large valve, which is 2000 295.15 32
E
used to observe and confirm the location of wedge. 2" 3000 50.80 295.15 66.55 330.20 355.60 - 45
5000 307.85 50
B
D
C
5 Suzhou Douson Drilling&Production Equipment Co., Ltd. ᔚࢷ᥋೨ᨛ᧔ܬᐧ͋దᬍНՃ 6
Gate Valve Gate Valve
E
3" 3000 76.20 358.65 93.73 482.60 482.60 R-31 79
B
2000 416.05 109.47 539.75 R-37 91
D
4" 3000 101.60 416.05 115.82 539.75 584.20 R-37 120
C
5000 457.20 119.13 625.35 R-39 150
2000 88.90 43
F
DMV-2 Mud Valve
3" 3000 76.20 279.40 93.73 457.20 482.60 - 51
5000 100.08 64 DMV-2 serial mud gate valve is applicable to working pressure of 7500psi in deep well drilling. The
4"×3"
3000
76.20 279.40
93.73
457.20 482.60 -
51
E
dimension of DMV-2 serial mud gate valve ranges from 2” to 5-3/16”. Butt join the weld end and
5000 100.08 64
flange connection. Valve bonnet can be easy to remove without dismantling valve from pipeline
2000 109.47 539.75 64
when inner parts need checking and replacing. This kind of design allows simple operation without
B
D
6"×4" 5000 101.60 330.20 115.82 623.82 584.20 - 95 I. Pin Roller Bearing bears Pressure
4"(100mm) and larger valve can adopt pin roller bearing, in this way, torque is
greatly reduced.
3" 3000 76.20 358.65 93.73 457.20 482.60 - 79 rubber body can provide reliable sealing performance. Stainless steel ring can provide
5000 396.75 100.08 109 efficient corrosion resistance and wearing resistance.
B
2" 51 521 67 331 356 BX-152 8. 60 56 Seat-seat ring and body-seat ring shall be sealed with high performance single sealing ring.
E
3" 76 619 86 625 584 BX-154 16.01 169 Ball screwed drive with balance tail rod shall be adopted, which is featured as low torque and
7500
4" 102 670 112 700 508 BX-155 21.36 215 convenient operation.
B
Dual valve seat structure shall be adopted, which can reduce maintenance cost.
D
D
C
C
DSC-FRAC, DSC-FRAC-HYD serial gate valve B B
It is designed and manufactured in accordance and material shall meet the requirements of NACE MR0175.
Full bore forged steel type gate valve can be characterized as high pressure resistance, erosion resistance, long service life and low DSC-FRAC, DSC-FRAC-HYD serial gate valve dimension
maintenance cost.
size working pressure rating(psi) A(mm) B(mm) C(mm) weight(kg) picture
Body-bonnet and wedge-seat are full metal sealing structure, which is reliable and efficient.
Seat-seat ring and body-seat ring shall be sealed in assistance of two elastic accumulative rings, in this way, low pressure seal can 3-1/16" 15000 598.4 547.4 1643.5 554
Valve cap and tail cap are equipped with sealant injection valve to supply sealant in time, in this way, the valve sealing and operation
5-1/8" 10000 736.6 688.7 1868.0 820 pic.1
performance can be greatly improved.
Triple slice structure is convenient to clean. 5-1/8" 15000 889.0 626.9 1807.1 1400
HYD piston type hydraulic actuator can realize remote control and fast switch valve. It can realize interchange in the similar valve in
7-1/16" 10000 889.0 749.9 2100.3 1564
overseas well product.
7-1/16" 15000 1041.4 886.4 2567.7 3219
applicable valve bore 2-1/16" ~ 7-1/16" 4-1/16" 10000 670.1 665.1 1800 750
product specification level PSL1~PSL4 5-1/8" 15000 889.0 626.9 1593.8 1502
product performance rating PR1~PR2
7-1/16" 10000 889.0 743.2 1827.8 1646
end connection flanged type,wire screwed type
Parameters
Casting steel valve body and forged steel valve bonnet
applicable valve bore 2-1/16" ~ 7-1/16"
low operation torque
working pressure 10000~20000psi
full metal sealing for valve body and valve bonnet
material class AA,BB,CC,DD,EE,FF,HH
wedge guide is designed to guarantee the lubrication of gate valve and surface protection of
temperature range -60ć ~121ć (KU) wedge
product specification level PSL1~PSL4 manually or hydraulically, pneumatically designed to realize automatic operation
product performance rating PR1~PR2 structure is simple and reliable, cost is low.
end connection flanged type,wire screwed type flange or thread connection
F F
E
B
B
D
D
C C
working flange end thread end number of flange end thread end
size pressure A(mm) C(mm) D(mm) E(mm)
B(mm) turns weight(kg)
rating(psi)
2-9/16" 3000 65.02 422.15 260.35 154.94 523.24 330.20 15-1/2 102 64
3-1/8" 3000 79.25 434.85 289.05 154.94 579.12 406.40 20 136 107
The maximum working pressure of EG-20T thermal gate valve is 5000psi, which is applicable
4-1/16" 3000 103.12 511.05 330.20 238.76 657.86 406.40 24-1/2 253 206
22
Product Performance Features:
Application Range of EG-20, SG-22, DS-FRAC
Gate Valve :
EG-20T thermal gate valve meets the requirements specified and expanding
8!2027 ET.GSBD
Parallel wedges, namely, SG-22, DS-FRAC and DS-FRAC are wedge can be replaced by steel wedge. Applicable H2S medium material can be
7!409
adopted to forge body gate valve, and they are divided into manual chosen in accordance with the latest NACE MR-01-75 specification.
application and actuating application. These valves can meet 6!209 ET.GSBD
high requirements specified in API . These valves are share some casting steel valve body and forged steel valve bonnet
common characteristics, such as elastic structure and high pressure 5!207
low operation torque
lip seal between the valve seat and valve body. This kind of seal can
metal valve body and valve bonnet seal
assist low pressure seal and prevent contaminated particles invading 4!2027
into body and sealing area. DS-FRAC valve are suitable for manual wedge guide is designed to guarantee the lubrication of gate valve and surface
FH.31-TH.33-ET.GSBD ET.GSBD protection of wedge manually or hydraulically, pneumatically designed to
operation as well as large bore application. Most of DS-FRAC manual 3!:027
valve and DS-FRAC valve possess the identical function. It adopts realize automatic operation
balance beam and a special ball screw mechanism to provide a low ET.GSBD
2!24027 structure is simple and reliable, cost is low.
operation torque. Choke valve is a kind of valve used to control fluid
flange or thread connection
flow or pressure through changing orifice area. size(in) 1
1 3111 4111 6111 21111 26111 31111
working pressure rating(psi)
Choke
5000 371.35 134.62 330.20 80
E
2-9/16" 3000 65.02 422.15 154.94 523.24 330.20 15-1/2 102
Valve
B
5000 472.95 193.04 406.40 152
D
2000 434.85 231.14 184
02
working
Number of
size pressure A(mm) B(mm) C(mm) D(mm) E(mm) weight(kg)
Turns
rating(psi)
F
2000 234.95 129.54 254.00 39
2000 147.32 49
E
5000 154.94 64
Product Application
Choke valve can be divided into fixed type, needle type, cage type and orifice type. It can adjust fluid
flow and pressure though changing the cross session of the channel. The medium has great velocity
between choke valve disc and valve seat, which will lead cavitation on the surface of adjusting
parts. In order to reduce cavitation damage , all controller made by Douson are manufactured with
cavitation resistant material(wearing resistant alloy).
The advantages of choke valve:
Simple structure is convenient to manufacture and maintain, additionally, the cost is low.
The shortages of choke valve:
H2 Adjustable Choke Valve
Adjusting accuracy is low, sealing surface is easy to erode, and it cannot be used to cut medium.
H2 adjustable choke valve has forged steel valve body, which is characterized as high
pressure resistance and erosion resistance. It can be operated manually.The structure is
simple and maintenance is low. It is equipped with serialized and standard choke aperture.
D
Specification
2-9/16" 5000 1" 209.6 176.2 589 280 137
Nominal Bore 1" ~ 6"
10000 236.5 208 616 280 150
B
Working Pressure 2000psi ~ 10,000 psi 15000 298.5 266.7 677.5 343 151
Specification Specification
Application high flow capacity, moderate corrosion choke controller tungsten carbide casing
Working Pressure 2000psi ~ 10,000 psi Working Pressure 5000psi ~ 20,000 psi
Temperature -75° F ~ +350° F (-60°C ~ +177°C) Temperature -75° F ~ +400° F (-60°C ~ +204°C)
MOS Multi Orifice Sleeve Choke Valve EXT Cage and External Sleeve Choke Valve
It can be used to control fluid flow in various service conditions, including single-phase and With integral cage design technology, inner annular space had been increased, and in
poly-phase(oil, gas and water). This kind of choke valve can be operated manually and this way, the possibility of corrosion for valve core shall be reduced and maximum flow
actuated with electric actuator or hydraulic actuator. control shall be provided. Valve body and valve bonnet are sealed with metal, and valve
MOS choke valve is designed to meet the continually changing needs of today's following stem is sealed in assistance of PTFE multiple level lip spring, which guarantee the sealing
reservoirs.The unique design is configured to ensure excellent flow rato control of all well performance. With 64-case visual position indicator, the fluid flow is well controlled.
types over a wide range of service conditions. Our customers can choose freely from manually type, hydraulically type, pneumatically
type and electrically type. It is simple to maintain and the manufacture cost is low.
10000 273 273 725 343 212 10000 273 273 725 343 215
D
2000 259 2000 263
D
B
B
5000 298.5 263.7 750 310 5000 298.5 263.7 802 313
10000 322.6 322.6 775 329 C 10000 322.6 322.6 826 332 C
Specification
For positive choke valve, special tools are adopted to replace oil nozzle. In
this way, flow section can be controlled to control flow fluid. Choke oil nozzle
Check
Valve
is manufactured with ceramic or cemented carbide, which is characterized as
wearing resistance and erosion resistance, which is convenient to replace with
special tool. Valve body and valve bonnet are connected with union, which make
it easy to replace oil nozzle.
working pressure
size choke aperture(in) A(mm) B(mm) C(mm) weight(kg)
rating(psi)
2000 198.4 169.9 230 73
2-9/16"
2000
3000
5000 1"
198.4
209.6
209.6
169.9
176.2
176.2
230
230
230
120
129
129
03
10000 236.5 208 230 142
Ball Valve
Larger viscosity shall not be applied.
The valve disc of swing check valve is in rotating movement around axis of
rotation. Its flow resistance is usually less than that of lift check valve, which is
suitable for large bore application.
04
Product Application
Check valve is also called retaining valve, unilateral valve, one-way valve or cut-
off valve. Its main function is preventing medium from back flowing, actuator
from back rotating and container medium from releasing. Check valve can be
used in pipeline supplied for auxiliary system where pressure might excess the
system pressure.
Product Application The ball of floating ball valve is floating. Under the effect of medium pressure,
the ball can produce a certain displacement and press tightly the seal surface
of the outlet end to guarantee the outlet end seal.
Floating ball valve is mainly characterized as concise structure, reliable seal,
Plug valve is a kind of swing valve with a piston-shaped closure parts, and the channel outlet of valve plug is simple structure and easy to repair. Seal surface and ball surface are always
connected to or separated from that of valve body by rotating 90 to realize switching. Plug valve is used cut, closed, therefore, the valve is difficult to be eroded by medium. And it is easy
connect and distribute medium; while sometimes it can be used to choke in accordance with the property of use to operate and repair, which is applicable to water, solvent, sour and natural
and corrosion resistant performance of sealing surface. gas. Additionally, it can be applied to medium where working condition is poor,
lug valve are widely applied to equipment concerning oil field exploration, transmission and oil refining, meanwhile; it such as oxygen, hydrogen peroxide, methane and ethylene. It is widely applied
can be used in petrochemical industry, chemical industry, coal gas, natural gas, liquefied petroleum gas, HVAC and to various industry. Floating ball valve structure is generally applied to moderate
other common industry. and low pressure ball valve.
trunnion mounted ball valve TB It is usually installed on the side outlet of casing head
Floating ball valve FC It is usually installed on the side outlet of casing head
Cylindrical plug valve SFA High pressure service environment where medium is cement
05
Product Application
Actuators designed and manufactured by Douson can be divided into pneumatic piston type actuator, diaphragm type actuator
and actuator with hydraulic and cable cutting performance. These drive mechanism can be applied to Douson’s wellhead valve
and pipeline. These actuators are modularly designed, so they performs well in interchange and inflexibility.
Douson have obtained PR2 certificate, fire safety certificate for actuator. Douson’s actuators have received good reputation from
our customers.
The power source for Douson’s actuator can be divided into hydraulic power and pneumatic power. Pneumatic medium is air or
nitrogen, while, hydraulic medium is hydraulic oil, and different hydraulic oil is adopted at different temperature level.
Single acting(plug) hydraulic DHA1-25 Used as safety valve in non- ultralow temperature service environment.
Single acting(plug) pneumatic DPA1-10 Used as safety valve in ultralow temperature service environment.
Single acting(diaphragm) pneumatic - Used as safety valve in ultralow temperature service environment.
Piston
Bore pressure(psi) model stroke(mm)
diameter(mm)
10000 DHA1-25-120-55 120 55
1-13/16"
15000 DHA1-25-150-55 150 55
Features: ! ! ! 2000
Safety 3000 DHA1-25-90-60 90 60
• visual position indicator
2-1/16" 5000
• Optional fire protection equipment can
10000 DHA1-25-120-60 120 60
fust close automatically
DHA1-25 Hydraulic Actuator 15000 DHA1-25-150-60 150 60
Features: ! ! !
Piston
Bore pressure(psi) model stroke(mm)
safety design diameter(mm)
• Valve bonnet is designed as back seal, which 10000 DPA1-10-330-55 330 55
1-13/16"
can be safe to replace valve stem packing. 15000 DPA1-10-460-55 460 55
DPA1-10 pneumatic actuator • Heavy spring design can ensure the back seal
2000
reliability of valve stem at low pressure.
3000
• Back seal is designed between valve bonnet and DPA1-10-330-60 330 60
Pneumatic piston actuator manufactured by Douson adopts simple and practical design, which is valve stem, which can avoid leakage caused by 2-1/16" 5000
applicable to reaction gate in various service environment and application condition. packing deformation or damage from fire. 10000
5000
Parameters
The material for this standard valve is supplied by Douson, and special standard inner part API 60K OR 75K AISI 4130 API 60K ASTM A487-4C API 60K OR 75K AISI API 60K OR 75K AISI API 60K OR 75K AISI 4130 API 60K OR 75K AISI
AA API TEMP L-Y
material, inner part and structure can be provided in accordance with non corrosive ALLOY STEEL ALLOY STEEL 4130 ALLOY STEEL 4130 NITRIDED NITRIDED 4130 NITRIDED
standard inner part API 60K OR 75K AISI 4130 API 60K ASTM A487-4C API 60K OR 75K AISI API 60K OR 75K AISI API 60K OR 75K AISI 4130 API 60K OR 75K AISI
DD-NL API TEMP L-Y
non corrosive ALLOY STEEL ALLOY STEEL 4130 ALLOY STEEL 4130 NITRIDED NITRIDED 4130 NITRIDED
simulation analysis for high temperature (low dynamic analysis for valve
temperature) valve temperature field
thermal coating technology corrosion-resistant overlay technology PR2 test FEMA stress and strain analysis for valve disc of check valve
9;@.5;*5;954*8/22/4-685*;):/54+7;/63+4:)52:*