1) Flatness Tolerance of 0.1 at edge A 2) surface tolerance of 1 at the surfaces of A,B,C EXAMPLE2-(anti-clockwise from the top) 1) Perpendicularity tolerance of 0.1 between edge A&B 2) Perpendicularity tolerance of 0.1 of edge A with respect of datum (i.e. edge B) 3) A surface tolerance of 0.1 i.e. a tolerance zone of 0.1 between A,B,C 4) Angularity tolerance of 0.1 of the between A & B, where it is regardless of the feature size 5) The position of the center has a tolerance of 0.5 with respect to A&B, irrespective of the feature size