Professional Documents
Culture Documents
Consoles - TL
*Available through the Acura Tool and Equipment Program; call 888-424-6857
1. Remove the dashboard center trims both sides (see DASHBOARD CENTER TRIM
REMOVAL/INSTALLATION ).
2. Remove the screws securing the center console panel (A).
3. A/T: Apply the protective tape (A) to the A/T shift panel (B) along the side edge of the shift lever boot
manual
Tuesday, February 16, 2016 1:28:55
1:28:51 PM Page 1 2005 Mitchell Repair Information Company, LLC.
1
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
base (C). Pry upon the edge of the shift lever trim with a flat-tipped screwdriver to release the hooks (D).
Fig. 2: Identifying Protective Tape, A/T Shift Panel, Shift Lever Boot Base And Hooks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. M/T: Lower the shift lever boot (A) to release the hooks (B) from the boot, then remove the shift knob
(C).
5. Detach the clips by pulling up the A/T shift panel (A). Disconnect the seat heater switch connectors or
seat ventilation switch connectors (B) and the A/T gear shift position indicator light connector (C) (A/T).
manual
Tuesday, February 16, 2016 1:28:51 PM Page 2 2005 Mitchell Repair Information Company, LLC.
2
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
Fig. 4: Identifying A/T Shift Panel, Ventilation Switch Connectors And Light Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
6. Detach the clips by pulling up the center console panel (A). Disconnect the accessory power socket
connector (B), then remove the console panel.
7. Install the console panel in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
manual
Tuesday, February 16, 2016 1:28:51 PM Page 3 2005 Mitchell Repair Information Company, LLC.
3
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
Available through the Acura Tool and Equipment Program; call 888-424-6857
manual
Tuesday, February 16, 2016 1:28:51 PM Page 4 2005 Mitchell Repair Information Company, LLC.
4
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
Fig. 6: Identifying RF Unit Connector And Center Console RF Unit With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig. 7: Loosening Parking Brake Lever Mounting Bolts With Torque Specifications
manual
Tuesday, February 16, 2016 1:28:51 PM Page 5 2005 Mitchell Repair Information Company, LLC.
5
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
4. Disconnect the center console subharness connector (A), the parking brake switch connector (B), the USB
adapter unit connector (C), and the seat ventilation control unit connector (D), then detach the harness
clips (E).
Fig. 8: Identifying Subharness Connector, Parking Brake Switch Connector, USB Adapter Unit
Connector, Control Unit Connector And Harness Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
manual
Tuesday, February 16, 2016 1:28:51 PM Page 6 2005 Mitchell Repair Information Company, LLC.
6
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
Fig. 10: Identifying Bolts Securing Center Console With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig. 11: Identifying Center Console, Clips, Front Console Cover, Clips And Guide Pin
Courtesy of AMERICAN HONDA MOTOR CO., INC.
8. Install the console in the reverse order of removal, and note these items:
If the clips are damaged, replace them with new ones.
Make sure each connector is plugged in properly.
Push the clips and the hooks into place securely.
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE: Take care not to scratch the center console or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when
Identifying components.
1. Gently pull out the center console rear trim (A) to detach the clips, then remove the trim.
manual
Tuesday, February 16, 2016 1:28:51 PM Page 8 2005 Mitchell Repair Information Company, LLC.
8
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
2. Install the trim in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
Push the clips into place securely.
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE: Take care not to scratch the center console or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when
Identifying components.
manual
Tuesday, February 16, 2016 1:28:51 PM Page 9 2005 Mitchell Repair Information Company, LLC.
9
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
3. Turn the center console light socket (A) 45 counterclockwise to remove the socket from the housing.
Remove the screws securing the center console armrest (B).
Fig. 14: Identifying Center Console Light Socket And Center Console Armrest
Courtesy of AMERICAN HONDA MOTOR CO., INC.
manual
Tuesday, February 16, 2016 1:28:51 PM Page 10 2005 Mitchell Repair Information Company, LLC.
10
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
5. Install the armrest in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
Push the clips into place securely.
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE: Take care not to scratch the center console or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when
Identifying components.
manual
Tuesday, February 16, 2016 1:28:51 PM Page 11 2005 Mitchell Repair Information Company, LLC.
11
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
Fig. 16: Identifying Center Console Panel, Center Console Pocket Assembly And Beverage Holder
Assembly
Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the screws from both sides of the beverage holder (A), then remove the driver's side shutter rail
(B), the passenger's side shutter rail (C), and the console shutter (D).
Fig. 17: Identifying Beverage Holder, Driver Side And Passenger Side Shutter Rails And Console
Shutter
Courtesy of AMERICAN HONDA MOTOR CO., INC.
manual
Tuesday, February 16, 2016 1:28:51 PM Page 12 2005 Mitchell Repair Information Company, LLC.
12
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE: Take care not to scratch the center console or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when
Identifying components.
Fig. 18: Identifying Console Carpet Trim, Hooks And Center Console
Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the screws from both sides of the center console (A), then remove the console side pockets (B).
manual
Tuesday, February 16, 2016 1:28:51 PM Page 13 2005 Mitchell Repair Information Company, LLC.
13
2012 Acura TL
2012 ACCESSORIES & EQUIPMENT Consoles - TL
4. Reassemble the center console in the reverse order of disassembly and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
Push the clips and the hooks into place securely.
manual
Tuesday, February 16, 2016 1:28:51 PM Page 14 2005 Mitchell Repair Information Company, LLC.
14