Professional Documents
Culture Documents
Crankshaft Piston Model PDF
Crankshaft Piston Model PDF
Czstochowa, 10-02-2011
1. Introduction; the aim of the project.
2. Study of Catia Version 5 aplications: Sketcher and Part Design.
3. Creation of particular parts of the Crankshaft- piston mechanism;
familiarizing with basic Sketcher and Part Design toolbars.
4. Making projections in Drafting aplication.
5. Creation of engine casing as an introduction to Assembly
aplication.
6. Getting acquainted with Assembly commands; Setting constraints
between engine parts;
7. Simulation of assembly motion in digital mock-ups (DMU)
Kinematics Simulator; performance of simulation.
8. Conclusions.
The aim of my project is to create 3-dimensional model of
crankshaft piston mechanism.
The crankshaft- piston mechanism is that part of an engine which translates linear
piston motion into rotation. Generally more than one piston is attached to the crank to
provide a smoother delivery of power to the rotating part, though many small engines
use only a single piston.
SKETCHER WORKBENCH
BASIC COMMANDS
PART DESIGN
BASIC COMMANDS Edge fillet
Shell
Pocket
Groove
PISTON
1. Circle PAD
2. Elongated hole, Circle, Bi tangent line PAD
3. Circle PAD
4. Project 3D element PAD
5. Project key hole shaped part Rotate PAD
6. Project circle PAD
7. MIRROR of the whole Body Part.
Assembly Design
CONSTRAINTS
Coincidence
Offset Constraint
(coaxiality)
Manipulation
with respect to CONSTRAINTS