Professional Documents
Culture Documents
X
Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any
method, for any purpose.
Certain materials included in this publication are reprinted with the permission of the copyright holder.
The data from DIN Standards are used by permission of DIN Deutsches Institut fr Normung e. V. They conform with the
current version of the DIN Standards concerned (December 1, 2007, Autodesk)
The JIS symbols in this product are used by Autodesk under permission from JIS.
ISA Symbols ISA
Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin
ISO 10628:1997 Symbols The International Organization for Standardization (ISO)
ISO 14617-5:2002 Symbols The International Organization for Standardization (ISO)
ISO 14617-6:2002 Symbols The International Organization for Standardization (ISO)
ISO 3511-1:1977 Symbols The International Organization for Standardization (ISO)
ISO 3511-2:1984 Symbols The International Organization for Standardization (ISO)
ISO 3511-3:1984 Symbols The International Organization for Standardization (ISO)
DIN 2481:1979-06 Symbols Deutsches Institut fr Normung e. V. (DIN)
JIS Z 8204:1983 Symbols Japanese Industrial Standard (JIS)
AutoPLANT is a registered trademark of Bentley Systems, Incorporated.
Trademarks
The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and
other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, Algor, Alias, Alias (swirl design/logo), AliasStudio,
Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD
SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Intent, Autodesk Inventor, Autodesk Map,
Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner, Backdraft, Built with
ObjectARX (logo), Burn, Buzzsaw, CAiCE, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion,
Communication Specification, Constructware, Content Explorer, Dancing Baby (image), DesignCenter, Design Doctor, Designer's
Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG
Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Fempro,
Fire, Flame, Flare, Flint, FMDesktop, Freewheel, GDX Driver, Green Building Studio, Heads-up Design, Heidi, HumanIK, IDEA
Server, i-drop, ImageModeler, iMOUT, Incinerator, Inferno, Inventor, Inventor LT, Kaydara, Kaydara (design/logo), Kynapse,
Kynogon, LandXplorer, Lustre, MatchMover, Maya, Mechanical Desktop, Moldflow, Moonbox, MotionBuilder, Movimento,
MPA, MPA (design/logo), Moldflow Plastics Advisers, MPI, Moldflow Plastics Insight, MPX, MPX (design/logo), Moldflow Plastics
Xpert, Mudbox, Multi-Master Editing, Navisworks, ObjectARX, ObjectDBX, Open Reality, Opticore, Opticore Opus, Pipeplus,
PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, ProMaterials, RasterDWG,
RealDWG, Real-time Roto, Recognize, Render Queue, Retimer,Reveal, Revit, Showcase, ShowMotion, SketchBook, Smoke,
Softimage, Softimage|XSI (design/logo), Sparks, SteeringWheels, Stitcher, Stone, StudioTools, ToolClip, Topobase, Toxik,
TrustedDWG, ViewCube, Visual, Visual LISP, Volo, Vtour, Wire, Wiretap, WiretapCentral, XSI, and XSI (design/logo).
All other brand names, product names, or trademarks belong to their respective holders.
Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY CAD STUDIO ABCOM
GMBH !AS IS." CAD STUDIO ABCOM GMBH DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
REGARDING THESE MATERIALS.
Published by:
CAD STUDIO ABCOM GMBH
Schellerdam 16
21079, Hamburg, Germany
1
Table of Contents
General introduction to the book ....................................................................................... 6
Additional comments and notes.... .......................................................................................................... 7
Glossary .................................................................................................................................................... 8
AutoCAD Plant 3D Commands ................................................................................................................ 14
AutoCAD Plant 3D System variables ....................................................................................................... 22
Project and drawing properties .........................................................................................25
Creating a new project ........................................................................................................................... 26
User Interface of the project properties dialog box ............................................................................... 33
Project Structure..................................................................................................................................... 35
How things work together ...................................................................................................................... 37
Adding Project Properties ................................................................................................................... 39
Adding drawing properties ................................................................................................................. 41
File naming scheme ................................................................................................................................ 43
Selection Lists ..................................................................................................................................... 45
Exercise - 1 .............................................................................................................................................. 49
Layer and Color settings.....................................................................................................51
The default Layer and Color schematic .................................................................................................. 52
Schematic settings .................................................................................................................................. 54
Creating a new Schematic ...................................................................................................................... 55
Switching between automation schemes .............................................................................................. 57
Pipe supports and automation schemes ................................................................................................ 59
Exercise - 2 .............................................................................................................................................. 60
Joint settings - End Connections.........................................................................................61
Type of connections................................................................................................................................ 62
Connection Adverbs ............................................................................................................................... 63
Simple Joints vs. Compound Joints ......................................................................................................... 64
Creating a new simple joint .................................................................................................................... 70
Creating a new compound joint ............................................................................................................. 72
Exercise - 3 .............................................................................................................................................. 75
AutoCAD P&ID Object Mapping .........................................................................................77
What does mapping properties lead to .................................................................................................. 78
Mapping properties from P&ID with the 3D model ............................................................................... 79
Mapping the properties .......................................................................................................................... 81
Plant 3D Class Mapping .......................................................................................................................... 83
Thebestwaytousethisbookisinfrontofyourcomputer,whereofcoursetheAutoCADPlant
3Dsoftwareisinstalled.Thenatureofthisbookishandson,whichmeansthatyouwillnotonly
readaboutpossibilities,butyouwillexperiencethemyourselfbyperformingpredefined
exercisesthatwilltestyourskillsandchallengeyourknowledge.
Togetthemostoutofthisbookitisessentialthatyouuseitinthefollowingway...
x Readtheexplanationoftypicalcommandsandtrytounderstandtheprocedures
necessarytoperformtheexercisesattheendofeachchapterorparagraph.
x Followtheexercises,theyareallbasedontheknowledgeyougainedinthechapter
before.
x Whenyouunderstandtheideaofsettinguppartsoftheconfiguration,trytothinkof
wayshowyoucouldusethisinthesetupofyourownfutureprojects.
AutoCADPlant3DAdvanced Page6
Generalintroductiontothebook
Additionalcommentsandnotes....
Duringthecourse,inseverallocationsinthebook,wehaveaddedadditionalcommentsand
notes,basedonourownexperiencewhencreatingprojectconfigurations.Thesenotesand
commentswillhelpyoutobetterunderstandtheusageofsomecommands,butalsowill
preventyoufrommakingthesamemistakeswemadewhenwestartedconfiguringAutoCAD
Plant3D.Tomakesureyouwillrecognizeautomaticallyourtips,tricksandwarningswewill
displaytheminthewayasshownbelow...
& Thetextthatgoeswiththetipwillbeplacedinthisarea
TIP!
) Thetextthatgoeswiththenotewillbeplacedinthisarea
Note!
, Thetextthatgoeswiththewarningwillbeplacedinthisarea
Warning!
AutoCADPlant3DAdvanced Page7
Generalintroductiontothebook
Glossary
TohelpyoutounderstandspecificterminologyinthisbookandintheAutoCADPlant3D
software,weaddedthisglossarywhichshowsalargenumberofcommandsandfunctionsthat
willbeusedorwhichyouwillencounterwhileconfiguring.
Acquiremode
Themodeinwhichapropertyacquiresitsvaluefromanothersource(propertiesforaproject,
drawing,orclass).
SeealsoOverridemodeandInitializationonly.
Acquisition
Apropertytypethatacquiresitsvaluefromanothersourcesuchasprojectproperties,drawing
properties,orclassproperties.
Annotation
AnAutoCADobjectcomprisedoftextand(optional)shapes.InAutoCADPlant3D,annotations
areusedtodisplaydatavaluesofP&IDcomponents(includingequipment,valves,lines,andso
on).Thesevaluesaredisplayedastext.
Assembly
Agroupofconnectedcomponentsthatarecommonlyplacedinadrawingatthesametime.
Forexample,alevelgaugeassemblymightcontainaninstrumentandfivevalves.Youcanplace
anassemblyfromatoolpaletteinsteadofselectingeachcomponentindividually.
Assumednozzle
AtypeofnozzlethatisautomaticallyaddedasarecordintheDataManagerwhenapipelineis
connectedtoapieceofequipment.Unlikeothernozzletypes,anassumednozzleisnotvisible
inthedrawing.
AutodeskConnectionPoint(ACP)
Anobjectthatcontainsportinformationwhichallowspipingconnectionstoobjectscreatedin
otherprograms(forexample:AutoCADMEP).
Automaticannotation
Atypeofannotationthatgetsautomaticallyinsertedwhenacomponentiscreated.Seealso
AnnotationandLinkedAnnotation.
Page8 AutoCADPlant3DAdvanced
Generalintroductiontothebook
Billofmaterials(BOM)
Listofcomponentsneededtofabricateapipeline.
Childtable
SeeObjecttable.
Classfamily
Aclassthatisusedtocategorizeotherclassesandsetastartingpointforclassproperties,tags,
andannotationsforthoseclasses.Forexample,PumpsandEquipmentareclassfamilies;
CentrifugalPumpandBallValveareclasses.
Class
Thetypeofanobject.EspeciallyaPlant3DorP&IDclasssuchasPipe,Valve,Nozzle,or
Equipment.
Classproperty
Apropertyofaclass;itreflectsadatavalue.Forexample,theHandValveclasstypemayhave
attributesofsize,spec,andmanufacturer.ThePumpsclasstypemayhaveflow,TDH,and
manufacturer.
Component
AnativeAutoCADPlant3Dobjecttype.AutoCADPlant3DcomponentsincludeEquipment,
Nozzles,Lines,Instruments,andInlineComponents.
Componentclass
SeeClass.
Connectionsymbol
Thegraphicalelementinadrawingthatindicatesanoffpageoronpagelineconnection.You
canchoosefromseveralsymbols.
Convert
TochangeanAutoCADobjecttoanAutoCADPlant3Dcomponentorline;theconverteditemis
includedindatareports.
Convertedsupport
ApipesupportthatwascreatedbyconvertingoneormoreAutoCADobjects.
AutoCADPlant3DAdvanced Page9
Generalintroductiontothebook
DataManager
AnenhancedsecondarywindowinAutoCADPlant3D;itdisplaysdatainatable.
DuplicateTags
TagsareuniqueidentifiersforcomponentsinaP&IDdrawingand/or3Dpipingmodel.
Becausetagshavetobeuniqueinasingledrawing,aduplicatetagisnotallowed.Duplicate
tagscanonlybeusedovermultipledrawingswherethetagswillbelinkedwithoneanother
throughtheDataManager,makingeachtaguniqueagain.
DWF(P&ID)
ADesignWebFormatfile;itisacompressedfileformatcreatedfromDWGfilesinaproject.
DWFfilesareeasytopublishandviewontheWeb.
EquipmentInfoTag
Anannotationstyle.Amultilinesetofattributesthatdisplaysselecteddatavaluesforaplaced
pieceofequipment.OneEquipmentInfoTagforeachequipmentcomponentistypicallyplaced
atthetopofadrawingorinagridacrossthebottomofthedrawing.
Familytable
Atablethatcontainsinformationaboutdifferentclasseswithinaclassfamily.Forexample,the
Equipmentfamilytablecontainsinformationaboutpumps,tanks,blowersandotherclasses
foundundertheEquipmentclassfamily.
Flag
Asymbol,likeanarrow,thatindicatesthedirectionoftheflow.Theflagsymbolcontainsthe
linenumberannotation.ItisontheNonengineeringtaboftheP&IDDINtoolpalette.
Flipgrip
Agripthatflipsanobjectinthedirectionshowninthegriparrow.
Flowarrow
Thedirectioninwhichaschematiclineflows.Youcancontrolthedirectionoftheflowarrow
usingdynamicgrips.
Freestandingannotation
Textthatisassociatedwithacomponent;itdoesnotmovewhenthecomponentmoves.
However,thedataassociatedwiththeannotationupdateswiththecomponent.Justthetext
getsdisconnected.Annotationsareeitherfreestandingorlinked.SeealsoLinkedAnnotation.
Page10 AutoCADPlant3DAdvanced
Generalintroductiontothebook
Gapcrossing
Avisualindicationonadrawingthatalinebreaksoneithersideofacrossing.
Initializationonly
Apropertysettingthatlimitspropertyacquisitiontoaonetimeevent,whenacomponentis
firstinitialized.Ifthepropertyissettoinitializationonly,itacquiresitsvaluefromits
designatedsourceandchangesimmediatelytooverridemode.
SeealsoAcquisitionandOverridemode.
Inlinecomponent
Acomponentwithanalignmentgripthatcanbedroppedontoaline.
Instrument
Adeviceorcombinationofdevicesuseddirectlyorindirectlytomeasure,display,orcontrola
variable.
Isometric
A2Ddrawingthatrepresents3Dobjects.Apipingisometricisapictorialrepresentationofa
singlerunofpipeandcancontaincomponentanddimensiondetail.
SeealsoSpooldrawing.
KKS(KraftwerkKennzeichensystem)
ApowerplantclassificationsystemmanagedanddevelopedbyVGPWorkingPanel.KKSis
usuallyusedwiththeDIN2481standard.
Linedesignationtable(LDT)
Listofpipelinesandtheirproperties.
Linkedannotation
Graphic,text,ortextwithagraphicthatlabelsacomponent.Thetextvaluesreflectthedata
attributevaluesofacomponent.ExamplesoflinkedannotationsarealineID,avalvesize,
instrumentfunctionsymbol,orEquipmentInfoTag.Linkedannotationmoveswhenthe
componentmoves.
Loopcrossing
Avisualindicationonadrawingthatalineloopsoveranotherline.
AutoCADPlant3DAdvanced Page11
Generalintroductiontothebook
Objecttable
Atablethatcontainsspecificinformationaboutaclassorapropertyofaclass.Forexample,
PumpsisanobjecttableoftheEquipmentfamilytable.
Offpageconnector
ThegraphicalrepresentationonaP&IDdrawingofthecontinuanceofalinefromoneproject
drawingtoanother.
OrthoCube
Asemitransparentgreen3Dsolidboxthatyouusetodefinetheboundariesofanorthographic
view.
Orthogonalconnection
ThedefaultAutoCADPlant3Dschematiclinebehaviorofconnectingat90degreeincrements.
Overridemode
Amodeinwhichanacquiredpropertycanbemodified.Apropertythatissetuptoacquireits
valuefromanothersourceisswitchedfromacquiringmodetooverridemodeintheProperties
paletteorintheDataManager.
SeealsoAcquiremode.
Part
Apipingcomponent.Especiallyasitisrepresentedinapipingspecorcatalog.
Pins
Symbolsthatidentifyachangeinapipelineproperty.IntheKKStaggingstandard,pinsidentify
achangeinproperties(forexample,UnitNumberorSystemCode).Apiniseitheropen(nofill)
orclosed(blackfill).Openpinsmarktheboundariesofagroupwithacommonproperty.
Closedpinsidentifyabreakinpipingsubsystemsorbranchesinapipeline.Whenusingeither
openorclosedpins,draftersmustmanuallychangethepropertiesofthelinesbeyondthe
openpinboundary.PinsarelocatedontheNonengineeringtaboftheDINtoolpalette.
Pipe
Atubeorhollowcylinderfortheconveyanceoffluid.
Pipesupport
Amanufacturedcomponentthatconnectsapipetoastructure.
Page12 AutoCADPlant3DAdvanced
Generalintroductiontothebook
Pipingcomponentfile(PCF)
Afilecreatedfromthe3Dmodelthatcontainspipelinedetailcommonlyusedtoproducean
Isometricdrawingandbillofmaterial.
Schematicline
AlineinAutoCADPlant3Dthatrepresentspipelinesandsignallines.
SpoolDrawing
Adrawingthatrepresentsafabricatedsubassemblyofapipeline.
SeealsoIsometric.
Tag
Apropertythatuniquelyidentifiesacomponent.
Trim
Asaverb,toaddhardwaretoapieceofequipment.Asanoun,additionalinformation.Apipe
trimisadditionalinformation(textorgraphics)tofurtherdefineapipingsegment.Equipment
trimisadditionalinformation(textorgraphics)tofurtherdefineapieceofequipment.
Validate
Tocheckadrawingoraprojectforerrorsandinconsistenciessuchasunconnected
components,nonterminatinglines,andsoon.
AutoCADPlant3DAdvanced Page13
Generalintroductiontothebook
AutoCADPlant3DCommands
TheAutoCADPlant3DcommandarespecificallydesignedforusewithAutoCADPlant3Dand
thereforewillnotbeavailableinregularAutoCAD.Thecommandsallowyoutostartcommands
overthecommandlineinsteadofusingthepopupmenus,ribbonsandorrightclick
functionality.
BelowaoverviewofalltheAutoCADPlant3Dspecificcommandswhichalsocanbefoundin
thehelpdocumentationofAutoCADPlant3Ditself.
Acptooltips
Enablestooltipsforconnectionports(ACP).
Auditproject
Allowsprojectmanagersorotheradministratorstoevaluatetheintegrityofaprojectand
correctserrors.
Autodeskconnectionpoint
CreatesanAutodeskConnectionPoint(ACP).
Compressobject
Compressesanddefragmentsthecacheddrawingdatathataccumulateswhileproject
drawingsaremodified.
Datamanager
Displaysdatathatcanbeviewed,modified,exported,andimported.
Datamanagerclose
ClosestheDataManager.
DWFoutputsettings
SpecifiesthetypeofP&IDdatathatyoucanincludeinDWFoutputfiles.
DWFoutputsettings3d
SpecifiesthetypeofPlant3DdatathatyoucanincludeinDWFoutputfiles.
Exporttoautocad
ExportscurrentdrawingtoAutoCADfileformatswhilemaintainingvisualfidelity.
Newproject
Createsanewproject.
Page14 AutoCADPlant3DAdvanced
Generalintroductiontothebook
Newprojectdwg
Createsanewdrawingtobeincludedinaproject.
NWnavigator
OpensNavisworksinanewwindow.
Offpageconnect
Createsanoffpageconnectorsymbolthatrepresentslinkedlinesthatcanspanmultiple
drawings.
Openproject
OpensaprojectfileintheProjectManager.
Pidannotate
Placesanannotationinadrawing.
Pidconvert
AddsdatatoanAutoCADobjecttoaddittoreports.
Pideditblock
EditsaP&IDcomponentsothatyoucancreateanewinstanceofthatobject.
Pidtag
DefinestaggingdataforaP&IDcomponentorline.
Plantameimportcatalog
ImportsanAutoCADMEPcatalogtouseintheSpecEditor.
Plantaudit
Auditsandrepairsprojectdataanddrawingsynchronizationerrors.
Plantcompass
Changescompasssettings.
Plantconnectionjoint
Connectstwoadjacentcomponentswithanewjoint.
Plantconvertlinetopipe
ConvertsAutoCADlineobjectstoPiping.
AutoCADPlant3DAdvanced Page15
Generalintroductiontothebook
Plantcustomparts
Createscustomandplaceholderparts.
Plantcustompartsclose
ClosestheCustomPartswindow.
Plantdisconnectjoint
Disconnectstwojoinedcomponentsbyremovingthefasteners.
Plantdynamictoolpalette
Loadsthedynamicpipespectoolpalettefromthecurrentspec.
Planteditautodeskconnectionpoint
ModifiesAutodeskConnectionPoint(ACP)properties.
Planteditbend
Createsapipebend.
Plantendcodes
Createsormodifiesendcodes.
Plantequipmentattach
AttachesanAutoCADobjecttoanequipmentmodel.
Plantequipmentconvert
Convertsa3DDWGmodeltoanAutoCADPlant3Dequipmentmodel.
Plantequipmentcreate
Createsanewequipmentmodel.
Plantequipmentdetach
Detachesallpreviouslyattachedobjectsfromanequipmentmodel.
Plantequipmentmodify
Modifiesanexistingequipmentmodel.
Plantfittingadd
Placespipingcomponents.
Page16 AutoCADPlant3DAdvanced
Generalintroductiontothebook
Plantfittingmove
Movespipingcomponentssuchthatvalvescanmovetoadifferentpipesegmentortoanopen
areainthedrawing.
Planthide
Hidestheselectedobjects.
Plantisoaddinfo
CreatesanIsoinformationitem.
Plantisoaddmsg
Createsamessageonthedrawing.Setsthemessagetext,enclosure,anddimensioning.
Plantisotbtablesetup
Configurestables(BOM,Cutpiecelist,weldlist,spoollist)thatdisplayonanisometricdrawing
titleblock.
Plantinventorequipmentconvert
ImportsanInventorAECexportfile(*.adsk)asanAutoCADPlant3Dequipmentmodel.
Plantinsertautodeskconnectionpoint
CreatesanAutodeskConnectionPoint(ACP)atanopenport.
Plantisolate
HideseverythingexcepttheselectedPlant3Dobjects.
Plantmodifysharedcontentfolder
SetsthecatalogfilefolderandmigratesfromearlierversionstoAutoCADPlant3D2012if
necessary.
Plantorthoadjacent
Createsanorthographicviewadjacenttoanexistingview.
Plantorthoannotate
Annotatescomponentsinorthodrawings.
Plantorthocreate
Createsaneworthographicview.
AutoCADPlant3DAdvanced Page17
Generalintroductiontothebook
Plantorthodelete
Deletesanorthographicview.
Plantorthoedit
Editsanorthographicview.
Plantortholocate
Locatesthe3Dobjectthatcorrespondswithanorthographicdrawingcomponent.
Plantorthoupdate
Updatesthecontentofanexistingorthographicview.
Plantorthoupdateannotation
Updatesalltheannotationsinanorthodrawing.
Plantorthovalidateview
Checksthemodeltoseeifchangeshavebeenmadesincethedrawingwaslastupdated.
Plantpartconvert
ConvertsanAutoCADblocktoapipingcomponentbyaddingports.
Plantpcfexport
Exportsapipingcomponentfile.
Plantpcftoiso
CreatesanIsofromaPCFfile.
Plantpidlinelist
Placesa3DequivalentofaP&IDobjectinaPlant3Dmodel.
Plantpidsizemapping
EditsthesizevaluesfromthedefaultfilethatmapsP&IDandPlant3Dobjectsandproperties.
Plantpipeadd
Routespipingandinsertscomponent.
Plantpipeslope
Editstheslopebetweentwoselectedportsonapiperun.
Page18 AutoCADPlant3DAdvanced
Generalintroductiontothebook
Plantpipesupportadd
Addspipesupports.
Plantpipesupportattach
AttachesAutoCADobjectstoapipesupport.
Plantpipesupportconvert
ConvertsAutoCADobjectstoapipesupport.
Plantpipesupportdetach
DetachesallAutoCADobjectsfromapipesupport.
Plantpipesupportmodify
Modifiespipesupports.
Plantweldadd
Addsaweldtopipe.
Plantproductioniso
Createsaproductioniso.
Plantquickiso
Createsaquickiso.
Plantregistercustomscripts
Registersaparametricmodel
Plantremoveorphanfasteners
Removesfastenersthatarenolongerpartofajoint.
Plantroutefromautodeskconnectionpoint
RoutepipingfromanAutodeskConnectionPointobject.
Plantshowall
DisplaysallPlant3Dobjectsinadrawing.
Plantsizedisplaymode
DisplayscomponentsizeonlyinprojectunitsorinbothImperialandmetricunitswhenthe
projectandcomponentunitsdiffer.
AutoCADPlant3DAdvanced Page19
Generalintroductiontothebook
Plantspecviewer
Displaysthecurrentpipespec.
Plantspecupdatecheck
Checksforchangesmadetospecfilesthatareinuseinadrawing.
Plantsteelmember
Createsastructuralmember.
Planttag
TagsaPlant3Dobject.
Projectmanager
Assemblesandmanagesfilesbelongingtoaproject.
Projectmanagerclose
ClosestheProjectManager.
Projectsetup
OpenstheProjectSetupdialogbox,whereadministratorscanconfigureandmanageproject
settings.
SDNFexport
ExportsstructuralobjectstoSteelDetailingNeutralFormat.
Sledit
Editsschematiclines.
Slgroup
Createsnewschematiclinegroupsfromexistingschematiclinesorschematiclinegroups.
Slgroupedit
Adds,removes,oreditsaselectedschematiclinegroupandassociatesordissociatesasignal
linegroupandapipelinegroup.
Slgroupselect
Selectsalllinesegmentsinagroup.
Sline
Createsaschematicline.
Page20 AutoCADPlant3DAdvanced
Generalintroductiontothebook
Synchstyles
Synchronizesthedrawingwiththeproject.
Validate
Validatestheopenprojectforerrorssuchasorphanedannotations,nonterminatedlines,
unconnectedoffpageconnectors,andsoon.
Validateconfig
Controlsthetypesoferrorsthatareflaggedbythevalidationprogram.
Validatesummary
Displaysthevalidationsummaryforaproject.
AutoCADPlant3DAdvanced Page21
Generalintroductiontothebook
AutoCADPlant3DSystemvariables
AutoCADsystemvariablesdonotspecificallystartcommands,butallowyoutoswitchsettings
onandoff.Forexampleasystemvariablecanswitchthewelcomedialogboxonoroff.Below
anoverviewofthesystemvariablesthatcanbeusedwithAutoCADPlant3D,thesesystem
variableswillnotbeavailableinregularAutoCAD.
Isoareavisibilty
DisplaysIsoareasasaperimeterorhatchobject
Plantconnectionmarker
Togglesthedisplayofthedisconnectmarker.
Plantcontentfolder
Displaysthesharedcontentcatalogfolder.
Plantdefaultlayer
Setsthepipinglayertousewhenusingautomatedlayerassignmentsandthelayercannotbe
determined.
Plantlockfadectl
Fadeslockedpipinginthe3Dmodel.
Plantgripeditmode
Controlswhetherinlinefittingsareconstrainedtomovewithinthecurrentpipesegmentorif
theymovetootherconnectedpipesegmentsinthenetwork.
Plantinsulationdisplay
ControlswhetherinsulationisdisplayedonAutoCADPlant3Dpipingobjects.
Plantinsulationmode
ControlswhetherinsulationisdisplayedonAutoCADPlant3Dpipingobjects.
Plantlockpointofsupport
Locksthepointofsupportonpipesupports.
Plantoffsetconnect
ControlswhetherAutoCADPlant3Dattemptstoconnectpipingwhensnappingtoapipe
connectionandusingpipeoffsetwhilerouting.
Page22 AutoCADPlant3DAdvanced
Generalintroductiontothebook
Plantmaxbendangle
Specifieswhetherpipebendscanbeusedupto90or180degrees.
Plantpcfunicode
CreatesUnicodePCFfiles.
Plantpipesilhdisplay
Setsthedisplayofthepipesilhouettes.
Plantpropmismatchdisplay
Togglesthedisplayofthepropertymismatchmarkers.
Plantplaceholderdisplay
TogglesthedisplayofthePlaceholderPartglyph.
Plantroutebend
Createspipebendswhileroutingpipe.
Plantsavedetail
SetsthedetailoftheproxygraphicswhenPlant3DobjectsareviewedinAutoCADor
Navisworkswithoutobjectenablers.
Plantslopethresholdangle
Specifiestheanglebelowwhichpipingistreatedassloped.
Plantspecnotify
Checksforspecfileupdateswhenthedrawingloads,andonatimeinterval.
Plantspecnotifytime
Setsthetimeintervalthatspecfilesarecheckedforupdates.
Plantwelcomeenabled
Displaysthewelcomescreenatstartup.
Plantwelcomenewproject
DisplaystheNewProjectbuttononthewelcomescreen.
AutoCADPlant3DAdvanced Page23
Generalintroductiontothebook
Plantwelddisplay
Togglesthedisplayofconnectionmarkers.
Slineortho
Setswhetherorthoisturnedonwhenslineisactivatedandwhethercornerpointsareimplied.
Sycnstylemode
Setshowprojectdrawingssynchronizewiththeprojectdatabase.
Vgrips
Controlsthedisplayofvertexgrips
Page24 AutoCADPlant3DAdvanced