Professional Documents
Culture Documents
NE
NSF 49, UL 61010, JIS K3800, SFDA YY-0569, EN 12469, SANS 12469
The cabinets are KI-Discus tested on sampling basis for performance integrity.
Available in 0.9, 1.2, 1.5 and 1.8 meter models (3', 4', 5' and 6').
Shown with optional telescoping stand.
NSF 49, UL 61010, JIS K3800, SFDA YY-0569, EN 12469, SANS 12469
Ambient air is pulled through the Near the work surface, the downflow
perforations located towards the work air stream splits with a portion moving
zone front to prevent contamination of toward the front air grille, and the
the work surface and work product. The remainder moving to the rear air grille.
inflow does not mix with the clean air A small portion of the ULPA filtered
within the cabinet work zone. Inflow air downflow enters the intake perforations
travels through a return path toward the at the side capture zones at a higher
common air plenum (blower plenum) at velocity (small blue arrows).
the top of the cabinet.
A combination of inflow and downflow
Approximately 37% of the air in the air streams forms an air barrier that
common plenum is exhausted through prevents contaminated room air from
the ULPA filter to the room. The entering the work zone, and prevents
remaining 63% of the air is passed work surface emissions from escaping
through the downflow ULPA filter and the work zone.
into the work area as a vertical laminar
ULPA-filtered air Air returns to the common air plenum
flow air stream bathing the work surface
where the 37% exhaust and 63%
Unfiltered / potentially contaminated air in clean air.
recirculation process is continued.
Room air / Inflow air The uniform, non-turbulent air stream
protects against cross contamination
within and throughout the work area.
The counterbalance locking mechanism adjustment. (Applies to 1.2 meter The control panel is located on the
is inherently safe; it locks the counter- / 4 ft, 115 V / 60 Hz model; contact center of the cabinet, and angled down
balance in place if either of the 2 cables Esco for information on other models.) for easy access by the operator
is detached. The sash cable and cable The permanently lubricated direct-drive Continuous monitoring of cabinet
clip have rated strength of more than external rotor motor/blower reduces airflow is displayed on a bright, easy-to-
6 times the weight of the sash window operating costs. read LCD panel.
4 of the largest Labculture Class II cabinet
Built-in RFI and electrical noise filters An integrated, temperature-compen-
(1.8 meter / 6 ft. model).
eliminate interference with adjacent sated, true airflow velocity sensor
Blower Efficiency instrumentation. provides an accurate airflow reading
despite room temperature fluctuation.
The Labculture blower system is designed An integral blower hour meter
for high performance operation, tracks operating life for predictive All electronic parts are contained inside
maximum energy efficiency and minimal maintenance planning. a plug-and-play module that permits
maintenance. easy exchange if required.
To prevent fan damage, a paper-catch
grille traps papers or towels that may Microprocessor software updates are
The external rotor motor design allows
drop down on the drain pan, preventing available from Esco for download via
for optimum cooling of the motor
them from being pulled into the column the Internet.
during extended operations and extends
the motor bearing life. by fan suction. Sentinel functions are factory set to default
The blower/motor can maintain airflow to ON or OFF, depending on worldwide
for a 150% increase in pressure loss Sentinel Gold Microprocessor destination and local preferences. Default
over clean filters without manual Control, Alarm, Monitoring System settings can be user activated through the
speed control adjustment, or 210% The Esco Sentinel Gold microprocessor- touchpad data entry access.
increase in pressure drop across the filter based control system supervises operation Automatic start-up sequence will
with manual speed control of all cabinet functions. prepare the cabinet for normal operation
and advise when safe conditions are
established.
Esco Centrifugal Fan with External Rotor Motor (left) vs.
Conventional Fan with Standard Motor (right) Selectable Quickstart mode, to
automatically turn on/off the cabinet
Esco cabinets use German made ebm-papst blower and lights by simply moving the
permanently lubricated, centrifugal motor/
blowers with external rotor designs. sash window to the correct position.
Integrated blades narrow the profile and An administrator controlled PIN
eliminate need for a motor shaft.
(Personal Identification Number) can be
Motors are selected for energy efficiency,
compact design, and flat profile. The completely
set to restrict access to main menu.
integrated assembly optimizes motor cooling. The airflow alarm can be activated
All rotating parts are unitized and balanced
for smooth, quiet, vibration-free operation.
or deactivated depending on user
preference and nature of the work.
Sentinel Gold Microprocessor Control System, Programmable When programmed ON the start-up sequence confirms status with Air Safe and local time display.
the Personal Identification Number (PIN) access restricts unauthorized adjustments.
an airflow alarm warns of deviations from normal velocities.
Consult your Esco Operating Manual Cabinet Construction prevent liquids from entering the lower
or contact your Sales Representative Robust construction and enhanced safety filtration and blower systems.
for information on user-preference
features qualify the cabinet for the most The drain pan is flush with the side
programming capabilities built into the
demanding laboratory applications. The walls to eliminate concealed or hard-
Sentinel microprocessor platform.
cabinet is fully assembled and ready to install to-clean spaces.
The field calibration mode makes it and operate when shipped.
easier for certifiers to calibrate the There are no screws in on the front or
airflow display. The interior work area is formed from a sides to trap contaminants or complicate
RS 232 data output port enables single piece of stainless-steel with large cleaning.
remote monitoring of cabinet operating radius corners to simplify cleaning. Optional service fittings are offset for 5
parameters. The cabinet work zone has no welded easier access.
Optional TCP/IP converter to connect RS joints to collect contaminants or rust. External plumbing is concealed behind
232 to network for remote monitoring. All stainless steel work surfaces are trim panels to maintain aesthetics.
accessible for cleaning.
External surfaces are coated with Esco
Tray components lift and remove to Isocide antimicrobial coating to protect
provide easy access and encourage against surface contamination and
surface decontamination. inhibit bacterial growth. Isocide
A recessed central area and stainless eliminates 99.9% of surface bacteria
steel drain pan channels spills and within 24 hours of exposure.
Service fixtures are offset for easier reach. Standard cabinets include two fixture provisions on each sidewall
(one provision on each sidewall for 0.9 meter/3 ft. cabinet). Electrical outlets are mounted below service
fixtures to minimize obstructions.
Helpful for certifiers, the hinged maintenance assembly opens to a fixed position on integrated, gas spring
struts providing front service access.
All key components, with the exception of the blower/motor assembly, are mounted outside the air stream
and away from contaminated air to permit service without decontamination. These include fluorescent lamps,
UV lamp, electrical harnesses, electronic boards and microprocessor control.
The telescoping Dynamic Chamber plenum minimizes physical lifting and accelerates filter change when required.
Work area containment is maintained even when removable components are lifted out for cleaning.
The one piece stainless steel work tray edges are radiused and easy to clean without crevices or joints.
The lower drain trough is a single-piece fabrication with wide open angles and a channel to direct spills to
the drain.
The closed sidewall contains no perforations, air return slots or other hidden areas where contaminants
can accumulate.
Biosafety Cabinets Air Quality Filtration Electrical Safety
Standards NSF / ANSI 49, USA* ISO 14644.1, Class 3, Worldwide EN-1822 (H14), Europe UL-C-61010A-1, USA
Compliance EN 12469, Europe JIS B9920, Class 3, Japan IEST-RP-CC001.3, USA CSA22.2, No.1010-192, Canada
JIS K 3800, Japan JIS BS5295, Class 3, Japan IEST-RP-CC007, USA EN-61010-1, Europe
SFDA YY-0569, China US Fed Std 209E, Class 1 USA IEST-RP-CC034.1, USA IEC61010-1, Worldwide
* The NSF / ANSI 49 certified models are: LA2-4A1, LA2-4A2, LA2-4A3, LA2-5A2, and LA2-6A2.
Dynamic Chamber Plenum Design The front armrest is raised above the Warranty
workzone to improve comfort and to The Labculture cabinet is warranted for
ensure that the operators arms do not 3 years excluding consumable parts and
block the forward airflow perforations. accessories.
The optional adjustable support stand Each cabinet is shipped with a compre-
provides work surface height control. hensive users manual complete with a
The frameless sash eliminates operator's report documenting all test procedures.
line of sight blockage Additional IQ/OQ documentation is
available upon request.
A generous sash opening allows for
easier access into the work zone, Contact your local Sales Representative
provides ample room for transferring of for specific warranty details or docu-
mentation requests.
small equipment.
The sliding window can be fully Accessories and Options
Negative pressure Positive pressure opened to insert and remove larger Esco offers a variety of options and
The Esco triple-wall design creates a Dynamic Chamber instrumentation and equipment. accessories to meet local applications.
plenum which surrounds contaminated areas with
negative pressure, preventing the possibility of
Contact Esco or your local Sales Represen-
contamination from leaks in filter seal, gasket or Electrical Safety and Certification tative for ordering information.
cabinet structure. The third wall conceals utilities.
All components meet or exceed applicable
Support Stands
Comfortable Ergonomic Design safety requirements. Fixed height, available 711 mm (28")
The LA2 cabinet is engineered for comfort, or 864 mm (34"), 38.1 mm (1.5")
Each cabinet is individually tested for
6 utility value and safety.
electrical safety at factory. - With leveling feet
- With casters
The 10 angled viewing window and Documentation specific to each cabinet
narrow profile front grille improves serial number is maintained on file. Adjustable height, hydraulic range
reach into the work area. 711 mm to 864 mm (28" to 34")
UL Listed for USA and Canada. - With leveling feet
The instant-start 5000k fluorescent Certified to all major world standards - With casters
lamp operates on an electronic ballast for biological safety cabinets, including Telescoping height stand for leveling
to reduce heat, improve comfort and the NSF / ANSI 49 and EN 12469 (refer feet, nominal range 660 mm or
conserve energy. to Standards Compliance table on this 960 mm (26" or 37.8")
The lamp delivers uniform lighting to page for the full list).
Telescoping height stand for casters,
the work surface for greater comfort, Contact Esco or your Sales Representative nominal range 660 mm or 880 mm
reduced glare and improved productivity; for site preparation information; see (26" or 34.6")
see Technical Specifications. Electrical Specifications. - Adjustable in 25.4 mm (1") increments
Antimicrobial Powder-Coating
Bacterial Population (10 folds)
16 1
66
27
8.
462 mm (1
13 77
670 mm (26.4")
5
14 9
10
ACCESS
G
15
OPENIN
16 11
45 mm
(1.8")
970 mm / 1270 mm / 1570 mm / 1870 mm 180 mm 12
(38.2"/ 50.0"/ 61.8"/ 73.6") (7.1") 139 mm
(5.5")
1115 mm / 1420 mm / 1725 mm / 2030 mm 815 mm (32.1")
(43.9"/ 55.9"/ 67.9"/ 79.9")
1. Exhaust ULPA filter 8. Plugged service fixture provisions 11. Stainless steel armrest 16. Removable side panel for plumbing
2. Blower (2 on each side) 12. Drain valve Retrofit Kit provision access
3. Downflow ULPA filter, angled 9. Electrical outlet Retrofit Kit provision 3. Esco Sentinel Gold microprocessor
1
(0.9 meter /3' model - one single
4. UV light Retrofit Kit provision
outlet in workzone) (1.2, 1.5 and
control system 7
5. IV-Bar Retrofit Kit provision 14. Safety glass sliding sash window
1.8 meter / 4',5' & 6' models - two
6. Electrical / Electronics panel single outlets in workzone) 15. Single-piece stainless steel back wall
and side walls
7. Fluorescent lamp 10. Stainless steel single-piece work tray
333 mm 610 mm
(13.1") (24")
269 mm
(10.6")
269 mm
269 mm
(10.6")
(10.6")
249 mm
(9.8")
129 mm
5.1"
350 mm 691 mm
(13.8") (27.2")
269 mm
269 mm
(10.6")
(10.6")
Side View - All Sizes Top View - LA2-4A_ Top View - LA2-6A_
General Specifications
North America Models LA2-3A2 LA2-4A2 LA2-5A2 LA2-6A2
(USA, Canada, Mexico / 115 V, 60 Hz)
Nominal Size 0.9 meters ( 3') 1.2 meters ( 4') 1.5 meters ( 5') 1.8 meters ( 6')
External Dimensions 1115 x 815 x 1540 mm 1420 x 815 x 1540 mm 1725 x 815 x 1540 mm 2030 x 815 x 1540 mm
(W x D x H) 43.9" x 32.1" x 60.6" 55.9" x 32.1" x 60.6" 67.9" x 32.1" x 60.6" 79.9" x 32.1" x 60.6"
Gross Internal Dimensions 970 x 623 x 670 mm 1270 x 623 x 715 mm 1570 x 623 x 670 mm 1870 x 623 x 715 mm
(W x D x H) 38.2" x 24.5" x 26.4" 50.0" x 24.5" x 28.1" 61.8" x 24.5" x 26.4" 73.6" x 24.5" x 28.1"
Usable Work Area 0.45 m2 (4.8 sq.ft.) 0.6 m2 (6.5 sq.ft.) 0.75 m2 (8.1 sq.ft.) 0.9 m2 (9.7 sq.ft.)
Tested Opening 229 mm (9") 229 mm (9") 229 mm (9") 203 mm (8")
Working Opening 274 mm (10.8") 274 mm (10.8") 274 mm (10.8") 248 mm (9.8")
Downflow, 63% 709 m3 / h (424 cfm) 928 m3 / h (555 cfm) 1147 m3 / h (686 cfm) 1289 m3 / h (759 cfm)
Net Weight *** 243 kg / 536 lbs 283 kg / 624 lbs 317 kg / 698 lbs 350 kg / 772 lbs
Shipping Weight *** 292 kg / 644 lbs 345 kg / 761 lbs 410 kg / 904 lbs 486 kg / 1072 lbs
Shipping Dimensions, 1230 x 940 x 1900 mm 1530 x 940 x 1900 mm 1910 x 940 x 1900 mm 2150 x 940 x 1980 mm
Maximum (W x D x H) *** 48.4" x 37" x 74.8" 60.2" x 37" x 74.8" 75.2" x 37" x 74.8" 84.6" x 37" x 77.9"
Shipping Volume, Maximum *** 2.20 m3 (78 cu.ft.) 2.73 m3 (97 cu.ft.) 3.41 m3 (121 cu.ft.) 4.00 m3 (141 cu.ft.)
Nominal Size 0.9 meters ( 3') 1.2 meters ( 4') 1.5 meters ( 5') 1.8 meters ( 6')
External Dimensions 1115 x 815 x 1540 mm 1420 x 815 x 1540 mm 1725 x 815 x 1540 mm 2030 x 815 x 1540 mm
(W x D x H) 43.9" x 32.1" x 60.6" 55.9" x 32.1" x 60.6" 67.9" x 32.1" x 60.6" 79.9" x 32.1" x 60.6"
Gross Internal Dimensions 970 x 623 x 670 mm 1270 x 623 x 670 mm 1570 x 623 x 670 mm 1870 x 623 x 670 mm
(W x D x H) 38.2" x 24.5" x 26.4" 50.0" x 24.5" x 26.4" 61.8" x 24.5" x 26.4" 73.6" x 24.5" x 26.4"
Usable Work Area 0.45 m2 (4.8 sq.ft.) 0.6 m2 (6.5 sq.ft.) 0.75 m2 (8.1 sq.ft.) 0.9 m2 (9.7 sq.ft.)
Tested Opening 229 mm (9") 229 mm (9") 229 mm (9") 203 mm (8")
Working Opening 274 mm (10.8") 274 mm (10.8") 274 mm (10.8") 248 mm (9.8")
Downflow, 63% 709 m3 / h (424 cfm) 928 m3 / h (555 cfm) 1147 m3 / h (686 cfm) 1289 m3 / h (759 cfm)
NSF / ANSI 49 <61 dBA <61 dBA <62.5 dBA <63 dBA
Sound Emission*
EN 12469 <58 dBA <58 dBA <59.5 dBA <60 dBA
> 1230 Lux > 1400 Lux > 1070 Lux > 1225 Lux
Fluorescent Lamp Intensity
(> 114 foot-candles) (> 130 foot-candles) (> 100 foot-candles) (> 114 foot-candles)
9
Net Weight *** 243 kg / 536 lbs 283 kg / 624 lbs 317 kg / 698 lbs 350 kg / 772 lbs
Shipping Weight *** 292 kg / 644 lbs 345 kg / 761 lbs 410 kg / 904 lbs 486 kg / 1072 lbs
Shipping Dimensions, 1230 x 940 x 1900 mm 1530 x 940 x 1900 mm 1910 x 940 x 1900 mm 2150 x 940 x 1980 mm
Maximum (W x D x H) *** 48.4" x 37" x 74.8" 60.2" x 37" x 74.8" 75.2" x 37" x 74.8" 84.6" x 37" x 77.9"
Shipping Volume, Maximum *** 2.20 m3 (78 cu.ft.) 2.73 m3 (97 cu.ft.) 3.41 m3 (121 cu.ft.) 4.00 m3 (141 cu.ft.)
Since 1978, Esco has emerged as a leader in the development of controlled environment, laboratory and cleanroom
equipment solutions. Products sold in more than 100 countries include biological safety cabinets, cleanroom products,
compounding pharmacy equipment, containment / pharma products, ductless fume hoods, in vitro fertilization
workstations, lab animal research products, laboratory fume hoods, laboratory ovens and incubators, laminar flow clean
benches and PCR products and instrumentation. With the most extensive product line in the industry, Esco has passed more
tests, in more languages, for more certifications, throughout more countries than any biosafety cabinet manufacturer in
the world. Esco remains dedicated to delivering innovative solutions for the clinical, life science, research and industrial
laboratory community. www.escoglobal.com.
Biological Safety Cabinets and Laminar Flow Laboratory Fume Hoods Laboratory Ovens
Laboratory Incubators PCR Thermal Cyclers Microplate Shaker/Incubators Ultralow Freezers
Esco Technologies, Inc. 2940 Turnpike Drive, Units 15-16 Hatboro, PA 19040, USA
Toll-Free USA and Canada 877-479-3726 Tel 215-441-9661 Fax 215-441-9660
us.escoglobal.com usa@escoglobal.com
Esco Micro Pte. Ltd. 21 Changi South Street 1 Singapore 486 777
Tel +65 6542 0833 Fax +65 6542 6920 mail@escoglobal.com
www.escoglobal.com
Esco Global Offices | Breukelen, The Netherlands | Kuala Lumpur, Malaysia | Manama, Bahrain
Marietta, OH, USA | Mumbai, India | Philadelphia, PA, USA | Salisbury, UK | Shanghai, China | Singapore
.
escoglobal com
LIVE SUPPORT Esco Micro Pte Ltd PT Esco Bintan Indonesia
Cert. No: 651333 Cert. No: 651333/1