The figure depicts the C3MR process which involves pre-cooling a feed using a mixed refrigerant (MR) in a heat exchanger to reduce its temperature before it enters the C3 column, where it is further separated. The separated components exit the C3 column and some are used in the MR loop to provide refrigeration as part of the pre-cooling step through an MR vapor-liquid equilibrium process.
The figure depicts the C3MR process which involves pre-cooling a feed using a mixed refrigerant (MR) in a heat exchanger to reduce its temperature before it enters the C3 column, where it is further separated. The separated components exit the C3 column and some are used in the MR loop to provide refrigeration as part of the pre-cooling step through an MR vapor-liquid equilibrium process.
The figure depicts the C3MR process which involves pre-cooling a feed using a mixed refrigerant (MR) in a heat exchanger to reduce its temperature before it enters the C3 column, where it is further separated. The separated components exit the C3 column and some are used in the MR loop to provide refrigeration as part of the pre-cooling step through an MR vapor-liquid equilibrium process.