Professional Documents
Culture Documents
T87 Range Stops: Application Installation
T87 Range Stops: Application Installation
INSTALLATION INSTRUCTIONS
APPLICATION INSTALLATION
Use the 50010944-001 range stops with the T87K, N 1. Set the thermostat to a temperature setting in the
thermostats to limit the minimum and maximum middle of the upper and lower range desired.
temperature settings. 2. Remove the thermostat from its base (if already
attached).
The 50010944-001 contains two range stop scales and 3. On the back of the thermostat, align the range stop
two #2-28 x 3/8 phillips pan head screws. with the holes on the back of the thermostat. See
Fig. 3.
HIGH LIMIT
SETTING
RANGE STOP 70 60
80
70
50
80 LOW LIMIT
60 SETTING
SCREW (2)
50
M13675
HIGH LIMIT
SETTING
RANGE STOP
M13679
20
26 LOW LIMIT
15 SETTING
Fig. 3. Aligning range stop with thermostat.
M13676
69-1864EFS
T87 RANGE STOPS
50
46 50 9
52 10
42
54 11
16.5
56 12
20 15
26 12 LOW 58 13
15 LIMIT
SETTING 60 14.5
10 62 15.5
9 64 16.5
09
SETTING
21 19 82 27.5
27
28
80 26
29 78 25
20
26 76 24
15
74 22.5
CELSIUS SCALE
72 21.5
70 20
09
68 19
66 18
64 17
62 16
M13678 60 14.5
Fig. 5. High range stop settings.
NOTICE D'INSTALLATION
APPLICATION INSTALLATION
Utiliser les butes 50010944-001 pour limiter la 1. Rgler le point de consigne du thermostat une
temprature minimale et maximale sur les thermostats temprature au milieu de la temprature maximale
T87 K et N. et de la temprature minimale dsires.
2. Retirer le thermostat de sa base (s'il y a lieu).
La trousse 50010944-001 contient deux chelles de 3. Au dos du thermostat, aligner la bute avec les
bute et deux vis no 2-28 x 3/8 tte cylindrique large. trous. Voir la Fig. 3.
POINT DE
70 60
CONSIGNE MAXIMUM
BUTE
80
50
70
80 POINT DE
60 CONSIGNE
MINIMUM
VIS (2)
50
MF13675
POINT DE
CONSIGNE MAXIMUM
BUTE M13679
20
Fig. 3. Alignement de la bute avec le thermostat.
26 POINT DE
15 CONSIGNE
MINIMUM 4. En utilisant comme guide les repres de tempra-
ture sur la bute, insrer les vis fournies dans les
trous des butes de temprature minimale et maxi-
VIS (2)
male. Serrer les vis. Consulter les Tables 1 et 2
09
MF13676
50
46 9 50
10 52
42
11 54
16.5
12 56
20 15
26 12 POINT DE 13 58
15 CONSIGNE
MINIMUM 14.5 60
10 15.5 62
9 16.5 64
09
18 66
17 64
16 62
14.5 60
MF13678
INSTRUCCIONES DE INSTALACIN
APLICACIONES INSTALACION
Use los limitadores de rango 50010944-001 con los 1. Coloque el termostato en una configuracin de
termostatos T87K, N para limitar las configuraciones temperatura que est entre el rango superior y el
mnimas y mximas de temperatura. inferior que desee, exactamente en medio.
2. Extraiga el termostato de su base (si ya est
El limitador de rango 50010944-001 contiene 2 escalas colocado).
de limitacin de rango y 2 tornillos en cruz con cabeza 3. En la parte trasera del termostato, alinee el limita-
ovalada N. 2-28, de 3/8. dor de rango con los agujeros de la parte trasera
del termostato. Vea la Fig. 3.
CONFIGURACION DE
LIMITE ALTO
LIMITADOR 70 60
DE RANGO
80
70
50
80
CONFIGURACION
60
DE LIMITE BAJO
TORNILLO (2)
50
MS13675
CONFIGURACION DE
LIMITE ALTO
LIMITADOR M13679
DE RANGO
20
Fig. 3. Alineacin del limitador de rango con el
26
15 CONFIGURACION
termostato.
DE LIMITE BAJO
4. Utilizando las marcas de temperatura del limitador
de rango, inserte los tornillos que se proporcionan
TORNILLO (2) en los agujeros de mnimo/mximo del limitador de
rango y ajstelos. Vea las Tablas 1 y 2 para cono-
09
MS13676
50
46 50 9
52 10
42 54 11
16.5
56 12
20 15
26 12
58 13
15 CONFIGURACION 60 14.5
DE LIMITE BAJO
10 62 15.5
9 64 16.5
09
84
70
88 80 Tabla 2. Limitador de Rango Alto
60
ESCALA FAHRENHEIT F C
88 31
86 29.5
23.5 CONFIGURACION DE
50
LIMITE ALTO 84 28
21
19
27 82 27.5
28
29 80 26
20
26 78 25
15
76 24
ESCALA CELSIUS
74 22.5
72 21.5
09
70 20
68 19
66 18
64 17
MS13678
62 16
60 14.5
Fig. 5. Configuraciones de lmite de rango alto.