Professional Documents
Culture Documents
- Application Note -
To change the assigned COM Port please follow the next steps:
1. Start the Device Manager (right mouseclick on My Computer, then left mouseclick on
Properties, in System Properties click on Hardware and than Device Manager). Please
check if the connection is established by connecting and disconnecting the USB cable. As
you connect the USB cable to the PC you should see it appearing as USB Serial Port with
the assigned COM Port in the Device Manager (as shown in picture below).
1 A-DVW101-100-EN
DV-Power
If the assigned COM Port is 1 to 6, the RMOWin / DV-Win software should be able to
establish the connection with the device. Otherwise, if the assigned COM Port is above 6 it is
neccesary to change it to one of the COM Ports between 1 and 6.
2 A-DVW101-100-EN