Professional Documents
Culture Documents
PRS Performance Report Reference V100R017 01 PDF en PDF
PRS Performance Report Reference V100R017 01 PDF en PDF
V100R017
Issue 01
Date 2016-09-15
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Overview
This section describes the counters and meanings of the predefined report templates of the
PRS.
Product Version
The following table lists the product version related to this document.
PRS V100R017
Intended Audience
This document is intended for network planning engineers and network management
engineers.
Change History
01 (2016-09-15)
This issue is the first official release for V100R017C00. Compared with last version, this
issue has no changes.
Draft A (2016-04-07)
This issue is the first release of the V100R017C00 beta version.
Contents
8.2.7.6 Carrier Access Times by Average Pilot Strength TopN Report........................................................................... 418
8.2.8 Mobility Report....................................................................................................................................................... 419
8.2.8.1 Inter-AN Hard Handoff Report.............................................................................................................................419
8.2.8.2 Carrier Inter-AN Hard Handoff Report................................................................................................................ 421
8.2.8.3 Intra-AN Hard Handoff Report............................................................................................................................ 424
8.2.8.4 Intra-AN Hard Handoff Worst Carrier Report......................................................................................................425
8.2.8.5 BSC Mobility KPI Report.................................................................................................................................... 427
8.2.8.6 Inter-BS Soft Handoff Report...............................................................................................................................429
8.2.8.7 Intra-BS Soft Handoff Report...............................................................................................................................431
8.2.8.8 Carrier Intra-BS Soft Handoff Report.................................................................................................................. 433
8.2.8.9 HRPD Session Transfer and Location Update Report..........................................................................................435
8.2.8.10 Carrier Mobility KPI Report...............................................................................................................................436
8.2.9 Resource Utilization Analysis Report..................................................................................................................... 437
8.2.9.1 Forward High Load of Abis Analysis Report.......................................................................................................437
8.2.9.2 BSC CSPU CPU Utilization Report..................................................................................................................... 440
8.2.9.3 BSC Resource Utilization Analysis KPI Report.................................................................................................. 440
8.2.9.4 BTS DO CEResource Utilization Report............................................................................................................. 442
8.2.9.5 BTS DO MacIndex Resource Utilization Report................................................................................................. 443
8.2.9.6 BTS Resource Utilization Analysis KPI Report...................................................................................................445
8.2.9.7 CBTS3606 Rank of BTSs by Reverse Congestion of Abis Report......................................................................446
8.2.9.8 CBTS3606 ABTSs in Desc Order by FER of Abis Link TopN Report............................................................... 447
8.2.9.9 CBTS3606 BTSs by Interruption Duration of Abis Link TopN Report...............................................................448
8.2.9.10 CBTS3900 Rank of BTSs by Reverse Congestion of Abis Report....................................................................449
8.2.9.11 CBTS3900 ABTSs in Desc Order by FER of Abis Link TopN Report............................................................. 450
8.2.9.12 CBTS3900 BTSs by Interruption Duration of Abis Link TopN Report.............................................................451
8.2.9.13 Frame Resource Utilization Analysis KPI Report..............................................................................................452
8.2.9.14 Carrier Resource Utilization Analysis KPI Report.............................................................................................453
8.3 CBSC-DO Performance Report..................................................................................................................................454
8.3.1 Service Integrality Report........................................................................................................................................454
8.3.1.1 Forward and Reverse Transmision Quality Report.............................................................................................. 454
8.3.1.2 DO FTCH Forward RLP Layer Retransmit Ratio Report.................................................................................... 456
8.3.2 Call Holding Report.................................................................................................................................................456
8.3.2.1 Connection Drop Trend Report............................................................................................................................ 457
8.3.3 HRPD Session Report............................................................................................................................................. 457
8.3.3.1 HRPD Session Setup Scale Report.......................................................................................................................457
8.3.3.2 HRPD Session Setup Report................................................................................................................................ 458
8.3.3.3 HRPD Session Setup Release Report................................................................................................................... 460
8.3.3.4 Access Authentication Report.............................................................................................................................. 475
8.3.4 Accessablity Report................................................................................................................................................. 476
8.3.4.1 Connection Setup Success Ratio Trend Report.................................................................................................... 476
8.3.4.2 Connection Setup Failure Reason Report.............................................................................................................477
8.3.4.3 Connection Setup Duration Report.......................................................................................................................479
30.3.4 Iur.........................................................................................................................................................................1177
30.3.4.1 Iur Signaling Plane(ATM)................................................................................................................................ 1177
30.3.4.2 Iur Signaling Plane(IP)..................................................................................................................................... 1178
30.3.4.3 Iur User Plane(ATM)........................................................................................................................................ 1179
30.3.4.4 Iur User Plane(IP)............................................................................................................................................. 1180
30.3.4.5 Iur User Plane(IP POOL)..................................................................................................................................1181
30.3.5 License................................................................................................................................................................. 1183
30.3.5.1 RNC License_Active User(BSC6910UMTS).................................................................................................. 1183
30.3.5.2 RNC License_Active User(BSC6900UMTS).................................................................................................. 1184
30.3.5.3 RNC License_Hardware Capacity(BSC6910UMTS)...................................................................................... 1184
30.3.5.4 RNC License_Hardware Capacity(BSC6900UMTS)...................................................................................... 1185
30.3.5.5 RNC License_HSPA User Number(BSC6910UMTS).....................................................................................1186
30.3.5.6 RNC License_HSPA User Number(BSC6900UMTS).....................................................................................1188
30.3.5.7 RNC License_Traffic(BSC6910UMTS)...........................................................................................................1190
30.3.5.8 RNC License_Traffic(BSC6900UMTS)...........................................................................................................1191
30.3.5.9 RNC License_Traffic(RAN Sharing or MOCN)(BSC6910UMTS).................................................................1192
30.3.5.10 RNC License_Traffic(RAN Sharing or MOCN)(BSC6900UMTS)...............................................................1193
30.3.6 RNC Traffic Model Report(6910UMTS)............................................................................................................ 1194
30.3.7 RNC Traffic Model Report(6900UMTS)............................................................................................................ 1197
30.3.8 RNC Traffic Trend Report(6910UMTS)............................................................................................................. 1200
30.3.9 RNC Traffic Trend Report(6900UMTS)............................................................................................................. 1201
30.3.10 UCell Group Traffic Trend Report.................................................................................................................... 1202
30.4 DPU DSP Utilization Rate of one Physical Subrack..............................................................................................1203
30.5 DPU DSP Utilization Rate of RNC........................................................................................................................ 1204
30.6 EGPU(CP Subsystem Detail Report)..................................................................................................................... 1205
30.7 EGPU(UP Subsystem Detail Report)..................................................................................................................... 1206
30.8 EGPU CP Breakdown Report.................................................................................................................................1207
30.9 MPU CPU Utilization Rate of RNC.......................................................................................................................1210
30.10 Port traffic analysis............................................................................................................................................... 1211
30.11 RTWP Breakdown................................................................................................................................................ 1212
30.12 Breakdown Report................................................................................................................................................ 1213
30.13 SPU CPU Utilization Rate of RNC...................................................................................................................... 1216
30.14 TCP Breakdown................................................................................................................................................... 1217
NE Type
ASNGW
Object Type
ASNGW
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
BSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
BSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
BSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Service TCH Uplink Quality % Full Rate ((([Uplink receiving level rank
Quality Identifier(%) Receiving 0 and receiving quality rank 0
Level in Full Rate TCH]+[Uplink
Measuremen receiving level rank 1 and
t Function receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 2 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 3 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 4 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 5 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 0 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 1 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 2 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 3 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 4 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 5 and
receiving quality rank 1 in
Full Rate TCH]))+(([Uplink
receiving level rank 0 and
receiving quality rank 2 in
Full Rate TCH]+[Uplink
receiving level rank 1 and
receiving quality rank 2 in
Full Rate TCH]+[Uplink
receiving level rank 2 and
receiving quality rank 2 in
Full Rate TCH]+[Uplink
receiving level rank 3 and
receiving quality rank 2 in
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
BSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
BSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
BSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Idle Cell TCH Traffic Volume Erl TCH ([Sum of TCH measurements
per Channel(Erl) Measuremen in the cell (excluding very
t Function early assignment)]*{48}/
({100}*{GP}*{60}))/
[Available TCHs]
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Service TCH Uplink Quality % Full Rate ((([Uplink receiving level rank
Quality Identifier(%) Receiving 0 and receiving quality rank 0
Level in Full Rate TCH]+[Uplink
Measuremen receiving level rank 1 and
t Function receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 2 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 3 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 4 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 5 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 0 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 1 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 2 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 3 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 4 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 5 and
receiving quality rank 1 in
Full Rate TCH]))+(([Uplink
receiving level rank 0 and
receiving quality rank 2 in
Full Rate TCH]+[Uplink
receiving level rank 1 and
receiving quality rank 2 in
Full Rate TCH]+[Uplink
receiving level rank 2 and
receiving quality rank 2 in
Full Rate TCH]+[Uplink
receiving level rank 3 and
receiving quality rank 2 in
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
TCH TCH Uplink Quality % Full Rate ((([Uplink receiving level rank
Uplink Identifier(%) Receiving 0 and receiving quality rank 0
Quality Level in Full Rate TCH]+[Uplink
Identifier Measuremen receiving level rank 1 and
t Function receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 2 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 3 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 4 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 5 and
receiving quality rank 0 in
Full Rate TCH]+[Uplink
receiving level rank 0 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 1 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 2 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 3 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 4 and
receiving quality rank 1 in
Full Rate TCH]+[Uplink
receiving level rank 5 and
receiving quality rank 1 in
Full Rate TCH]))+(([Uplink
receiving level rank 0 and
receiving quality rank 2 in
Full Rate TCH]+[Uplink
receiving level rank 1 and
receiving quality rank 2 in
Full Rate TCH]+[Uplink
receiving level rank 2 and
receiving quality rank 2 in
Full Rate TCH]+[Uplink
receiving level rank 3 and
receiving quality rank 2 in
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
LOGIC PORT
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
MLPPP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
PPP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
BTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
CS RR370:Congestion % Channel -
Performa Rate on SDCCH per Assignment
nce KPI CELL (due to Busy) Failure
Measuremen
t per Cell
K3045:Congestion % KPI -
Rate on TCH (All Measuremen
Channels Busy) t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
[L9210:Total Number of
Uplink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
K3045:Congestion % KPI -
Rate on TCH (All Measuremen
Channels Busy) t per Cell
RH303C:Intra-BSC % Intra-cell -
Radio Handover Handover
Success Rate Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RH303C:Intra-BSC % Intra-cell -
Radio Handover Handover
Success Rate Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
CS RA303G:Success % Immediate -
Accessab Rate of Immediate Assignment
lity KPI Assignments Measuremen
t per Cell
RR370:Congestion % Channel -
Rate on SDCCH per Assignment
CELL (due to Busy) Failure
Measuremen
t per Cell
K3041:TCH % KPI -
Congestion Rate Measuremen
(Overflow) t per Cell
RH333:Handover % Intra-cell -
Drop Rate of TCH Handover
Measuremen
t per Cell
CS RH303:Handover % Incoming -
Mobility Success Rate Internal
KPI Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success % Incoming -
Rate of Radio Internal
Handover Inter-Cell
Handover
Measuremen
t per Cell
RH303B:Intra-BSC % Intra-cell -
Handover Success Handover
Rate Measuremen
t per Cell
RH303C:Intra-BSC % Intra-cell -
Radio Handover Handover
Success Rate Measuremen
t per Cell
RH303D:Success % Incoming -
Rate of Incoming External
External Inter-Cell Inter-Cell
Radio Handovers Handover
Measuremen
t per Cell
RH303E:Success % Outgoing -
Rate of External External
Outgoing Cell Radio Inter-Cell
Handovers Handover
Measuremen
t per Cell
RK3255:TRX % KPI -
Usability Measuremen
t per Cell
[L9210:Total Number of
Uplink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RA303G:Success % Immediate -
Rate of Immediate Assignment
Assignments Measuremen
t per Cell
RA301G:Success % Immediate -
Rate of Random Assignment
Access Measuremen
t per Cell
RH303:Handover % Incoming -
Success Rate Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success % Incoming -
Rate of Radio Internal
Handover Inter-Cell
Handover
Measuremen
t per Cell
RR370:Congestion % Channel -
Rate on SDCCH per Assignment
CELL (due to Busy) Failure
Measuremen
t per Cell
K3041:TCH % KPI -
Congestion Rate Measuremen
(Overflow) t per Cell
K3045:Congestion % KPI -
Rate on TCH (All Measuremen
Channels Busy) t per Cell
RR307:TCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
RR300:SDCCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
l Retainability Report
l Worst Cell Report
l BSC KPI Overview Report
Accessibility Report
Null
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RA303G:Success % Immediate -
Rate of Immediate Assignment
Assignments Measuremen
t per Cell
RA301G:Success % Immediate -
Rate of Random Assignment
Access Measuremen
t per Cell
RH303:Handover % Incoming -
Success Rate Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success % Incoming -
Rate of Radio Internal
Handover Inter-Cell
Handover
Measuremen
t per Cell
RR370:Congestion % Channel -
Rate on SDCCH per Assignment
CELL (due to Busy) Failure
Measuremen
t per Cell
K3041:TCH % KPI -
Congestion Rate Measuremen
(Overflow) t per Cell
K3045:Congestion % KPI -
Rate on TCH (All Measuremen
Channels Busy) t per Cell
RR307:TCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
RR300:SDCCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
Mobility Report
Null
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RCA313:Assignmen % Assignment -
t Success Rate Measuremen
t per Cell
Retainability Report
Null
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
K3041:TCH % KPI -
Congestion Rate Measuremen
(Overflow) t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
CS RA303G:Success % Immediate -
Accessab Rate of Immediate Assignment
lity KPI Assignments Measuremen
t per Cell
RR370:Congestion % Channel -
Rate on SDCCH per Assignment
CELL (due to Busy) Failure
Measuremen
t per Cell
K3041:TCH % KPI -
Congestion Rate Measuremen
(Overflow) t per Cell
RH333:Handover % Intra-cell -
Drop Rate of TCH Handover
Measuremen
t per Cell
CS RH303:Handover % Incoming -
Mobility Success Rate Internal
KPI Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success % Incoming -
Rate of Radio Internal
Handover Inter-Cell
Handover
Measuremen
t per Cell
RH303B:Intra-BSC % Intra-cell -
Handover Success Handover
Rate Measuremen
t per Cell
RH303C:Intra-BSC % Intra-cell -
Radio Handover Handover
Success Rate Measuremen
t per Cell
RH303D:Success % Incoming -
Rate of Incoming External
External Inter-Cell Inter-Cell
Radio Handovers Handover
Measuremen
t per Cell
RH303E:Success % Outgoing -
Rate of External External
Outgoing Cell Radio Inter-Cell
Handovers Handover
Measuremen
t per Cell
RK3255:TRX % KPI -
Usability Measuremen
t per Cell
[L9210:Total Number of
Uplink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RA303G:Success % Immediate -
Rate of Immediate Assignment
Assignments Measuremen
t per Cell
RA301G:Success % Immediate -
Rate of Random Assignment
Access Measuremen
t per Cell
RH303:Handover % Incoming -
Success Rate Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success % Incoming -
Rate of Radio Internal
Handover Inter-Cell
Handover
Measuremen
t per Cell
RR370:Congestion % Channel -
Rate on SDCCH per Assignment
CELL (due to Busy) Failure
Measuremen
t per Cell
K3041:TCH % KPI -
Congestion Rate Measuremen
(Overflow) t per Cell
K3045:Congestion % KPI -
Rate on TCH (All Measuremen
Channels Busy) t per Cell
RR307:TCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
RR300:SDCCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RA303G:Success % Immediate -
Rate of Immediate Assignment
Assignments Measuremen
t per Cell
RA301G:Success % Immediate -
Rate of Random Assignment
Access Measuremen
t per Cell
RH303:Handover % Incoming -
Success Rate Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success % Incoming -
Rate of Radio Internal
Handover Inter-Cell
Handover
Measuremen
t per Cell
RR370:Congestion % Channel -
Rate on SDCCH per Assignment
CELL (due to Busy) Failure
Measuremen
t per Cell
K3041:TCH % KPI -
Congestion Rate Measuremen
(Overflow) t per Cell
K3045:Congestion % KPI -
Rate on TCH (All Measuremen
Channels Busy) t per Cell
RR307:TCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
RR300:SDCCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RA303G:Success % Immediate -
Rate of Immediate Assignment
Assignments Measuremen
t per Cell
RA301G:Success % Immediate -
Rate of Random Assignment
Access Measuremen
t per Cell
RH303:Handover % Incoming -
Success Rate Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success % Incoming -
Rate of Radio Internal
Handover Inter-Cell
Handover
Measuremen
t per Cell
RR370:Congestion % Channel -
Rate on SDCCH per Assignment
CELL (due to Busy) Failure
Measuremen
t per Cell
K3041:TCH % KPI -
Congestion Rate Measuremen
(Overflow) t per Cell
K3045:Congestion % KPI -
Rate on TCH (All Measuremen
Channels Busy) t per Cell
RR307:TCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
RR300:SDCCH % Channel -
Availability Configuratio
n
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RCA313:Assignmen % Assignment -
t Success Rate Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
K3041:TCH % KPI -
Congestion Rate Measuremen
(Overflow) t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6000(GSMR)
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6000(GSMR)
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
GU1002:Total s GU Power -
Duration That GSM Sharing
Shares Power with Measuremen
UMTS t for TRX
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
GU1002:Total s GU Power -
Duration That GSM Sharing
Shares Power with Measuremen
UMTS t for TRX
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BWA
Object Type
BWA
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
PS Call Drop Ratio % PS Call Drop (([PS Call Drops (Too many
Performance Erasure frames)[Times]]+[PS
Stat Call Drops (No reverse frame
received)[Times]]+[PS call
Drops (Abis interface
abnormal)[Times]]+[PS Call
Drops (A1 interface abnormal)
[Times]]+[PS Call Drops
(PCF failure)[Times]]+[PS
Call Drops (HHO failure)
[Times]]+[PS Call Drops
(Other causes)[Times]])/
([Successful PS Call
Setups[Times]]+[PS
Successful Incoming Hard
HOs[Times]]))*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
CS Call CS Call Drop Times times CS Call [CS Call Drops (Too many
Drop Drop Erasure frames)[Times]]+[CS
Reason Performance Call Drops (No reverse frame
Analyse Stat received)[Times]]+[CS Call
Drops (Abis interface
abnormal)[Times]]+[CS Call
Drops (A2 interface abnormal)
[Times]]+[CS Call Drops
(Other causes)[Times]]
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
PS Call PS Call Drop Times times PS Call Drop [PS Call Drops (Too many
Drop Performance Erasure frames)[Times]]+[PS
Reason Stat Call Drops (No reverse frame
Analyse received)[Times]]+[PS call
Drops (Abis interface
abnormal)[Times]]+[PS Call
Drops (A1 interface abnormal)
[Times]]+[PS Call Drops
(PCF failure)[Times]]+[PS
Call Drops (Other causes)
[Times]]+[PS Call Drops
(HHO failure)[Times]]
PS Call Drop Ratio % PS Call Drop (([PS Call Drops (Too many
Performance Erasure frames)[Times]]+[PS
Stat Call Drops (No reverse frame
received)[Times]]+[PS call
Drops (Abis interface
abnormal)[Times]]+[PS Call
Drops (A1 interface abnormal)
[Times]]+[PS Call Drops
(PCF failure)[Times]]+[PS
Call Drops (HHO failure)
[Times]]+[PS Call Drops
(Other causes)[Times]])/
([Successful PS Call
Setups[Times]]+[PS
Successful Incoming Hard
HOs[Times]]))*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSCVG3Pilot
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSCVG3Pilot
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Access % Performance -
Authentication Stat of BSC
Success Ratio[%] HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Access % Performance -
Authentication Stat of BSC
Success Ratio[%] HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.3.2 Single Carrier Avg Reverse Speed During DO Conn Hoding Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.3.3 Single Carrier Ava Reverse Speed During DO Conn Hoding Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.3.4 Single Carrier Avg Forward Speed During DO Conn Hoding Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.3.5 Single Carrier Avg F-Speed During DO Conn Hoding Carrier Report
Report Type
Simple Report
NE Type
CBSC
Object Type
Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Forward Forward Link Data none DO TCH [DO FTCH Forward RLP
RLP Retransmission Forward Layer Retransmit
Retransm Rate[%] RLP Throughput[byte]]/[DO FTCH
it TopN Throughput Forward RLP Layer Transmit
Stat Throughput[byte]]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
DO B Traffic s EV-DOB -
Channel Connection Carrier
Duration(DO B) Traffic
[Second] Performance
Stat
DO B Traffic s EV-DOB -
Channel Connection Carrier
Duration(DO B) Traffic
[Second] Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Forw and Forward RLP none RLP [SAR Octets Sent on Forward
Reve Throughput(DO B) Throughput Channels(Excluding those
Through [MB] Stat Resent) (DO B) [KB]]/
put(DOB {1000}+[SAR Octets Resent
) on Forward Channels (DO B)
[Byte]]/{1000000}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Pilot Access Times by none EV-DO BSC [Access Times by Access Pilot
Strength Access Pilot Cover Strength(0,2)[Times]]/
Proportio Strength(-0,-2) Performance ([Access Times by Access
n Ratio[%] Stat of Pilot Strength(0,2)[Times]]+
Access State [Access Times by Access Pilot
Strength(-2.5,-4.5)[Times]]+
[Access Times by Access Pilot
Strength(-5,-7)[Times]]+
[Access Times by Access Pilot
Strength(-7.5,-10)[Times]]+
[Access Times by Access Pilot
Strength(-10.5,-31.5)
[Times]])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.9.8 CBTS3606 ABTSs in Desc Order by FER of Abis Link TopN Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.9.11 CBTS3900 ABTSs in Desc Order by FER of Abis Link TopN Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Carrier Forward Link Data none DO TCH [DO FTCH Forward RLP
order by Retransmission Forward Layer Retransmit
DO Rate[%] RLP Throughput[byte]]/[DO FTCH
FTCH Throughput Forward RLP Layer Transmit
Forward Stat Throughput[byte]]*{100}
RLP
Layer DO FTCH Forward none DO TCH -
Retransm RLP Layer Transmit Forward
it Ratio Throughput[byte] RLP
Desc Throughput
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CHLR
Object Type
CHLR
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CMSC
Object Type
CMSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
GGSN
Object Type
UGW and GGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
GGSN
Object Type
UGW and GGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
GGSN
Object Type
UGW and GGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
GGSN
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
HLR
Object Type
HLR Function
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MGW
Object Type
MGW
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
MSCe
Object Type
MSCe
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
MSCe
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Object Type
MTP Signaling Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Object Type
Office Direction
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Object Type
MSCe
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Object Type
MSCe
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Object Type
MSCe
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
MSCServer
Object Type
BICCLink
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
MSCServer
Object Type
H248Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
MSCServer
Object Type
M2UALink
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
MSCServer
Object Type
M3UALink
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
MSCServer
Object Type
MTP3BLink
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
MTPLink
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
MSCServer
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
Trunk Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
Office Direction
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
MSCServer
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
NodeB
Object Type
Local Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
NodeB
Object Type
NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
NodeB
Object Type
NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
PCU
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
PCU
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS9]*({1}-
[Retransmission rate of
downlink EGPRS RLC data
block using MCS9(%)]/
{100})))/[Total number of
downlink EGPRS RLC data
blocks])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
PCU
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
PCU
Object Type
PCU
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Data Uplink RLC kilobi Uplink RLC ([Number of uplink RLC data
Through Payload( kbits ) ts data blocks using CS1]*{23}+
put transmission [Number of uplink RLC data
measurement blocks using CS2]*{34}+
[Number of uplink RLC data
blocks using CS3]*{40}+
[Number of uplink RLC data
blocks using CS4]*{54})*{8}/
{1024}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
PCU
Object Type
Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100})*(([VS.RAB.Suc
cEstabCS.Conv]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
/
(([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str])+
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Combined Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
MR VS.Periodic.MrRpt. % RRC MR
Report Worse.RSCP.Ratio Measuremen
RSCP t <per Cell>
Segment
Ratio VS.Periodic.MrRpt. None RRC MR -
RSCP.0 Measuremen
t <per Cell>
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
MR VS.Periodic.MrRpt. % RRC MR
Report Worse.EcNo.Ratio Measuremen
EcNo t <per Cell>
Segment
Ratio VS.Periodic.MrRpt. None RRC MR -
EcNo.0 Measuremen
t <per Cell>
VS.EcNo.Cum.SHO dB RRC MR -
Measuremen
t <per Cell>
TP Analysis Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
TP VS.TP.UE.Worse.Ra % RRC
Segment tio Connection
Ratio Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP2 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP3 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP4 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP5 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP6 dB RRC -
.9 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1 dB RRC -
0.15 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1 dB RRC -
6.25 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP2 dB RRC -
6.35 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP3 dB RRC -
6.55 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP. dB RRC -
More55 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP0 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP1 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP10 dB RRC -
.15 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP16 dB RRC -
.25 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP2 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP26 dB RRC -
.35 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP3 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP36 dB RRC -
.55 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP4 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP5 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP6. dB RRC -
9 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP.M dB RRC -
ore55 Connection
Setup
Measuremen
t <per Cell>
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
UE VS.Periodic.MrRpt. % RRC MR
TxPower UETxPower.Worse. Measuremen
Segment Ratio t <per Cell>
Ratio
VS.Periodic.MrRpt. None RRC MR -
UETxPower.0 Measuremen
t <per Cell>
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
MR VS.Periodic.MrRpt. % RRC MR -
Report Worse.EcNo.Ratio Measuremen
EcNo t <per Cell>
Segment
Ratio VS.Periodic.MrRpt. None RRC MR -
EcNo.0 Measuremen
t <per Cell>
VS.EcNo.Cum.SHO dB RRC MR -
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
MR VS.Periodic.MrRpt. % RRC MR -
Report Worse.RSCP.Ratio Measuremen
RSCP t <per Cell>
Segment
Ratio VS.Periodic.MrRpt. None RRC MR -
RSCP.0 Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
TP VS.TP.UE.Worse.Ra % RRC -
Segment tio Connection
Ratio Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP2 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP3 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP4 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP5 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP6 dB RRC -
.9 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1 dB RRC -
0.15 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1 dB RRC -
6.25 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP2 dB RRC -
6.35 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP3 dB RRC -
6.55 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP. dB RRC -
More55 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP0 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP1 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP10 dB RRC -
.15 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP16 dB RRC -
.25 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP2 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP26 dB RRC -
.35 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP3 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP36 dB RRC -
.55 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP4 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP5 dB RRC -
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP6. dB RRC -
9 Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP.M dB RRC -
ore55 Connection
Setup
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
UE VS.Periodic.MrRpt. % RRC MR -
TxPower UETxPower.Worse. Measuremen
Segment Ratio t <per Cell>
Ratio
VS.Periodic.MrRpt. None RRC MR -
UETxPower.0 Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100})*(([VS.RAB.Suc
cEstabCS.Conv]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
/
(([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str])+
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]))
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
BSC6900GU
Object Type
UCell Group
Subreport Information
Subrepo Counter Co Functi Formula
rt Name un on
ter Subse
Un t
it
Multi- RRC -
Sector MR
Chain No Measu
VS.Periodic.MrRpt.RSCP.0
Report ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.1
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.2
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.3
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.4
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.5
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.6
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.7
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.8
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.9
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.0
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.1
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.2
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.3
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.4
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.5
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.6
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.7
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.8
ne rement
<per
Cell>
No Soft (([VS.SHO.AS.1RL]+
ne Hando [VS.SHO.AS.2RL]+
ver [VS.SHO.AS.3RL]+
Measu [VS.SHO.AS.4RL]+
rement [VS.SHO.AS.5RL]+
per cell [VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
VS.SHO.Factor.RL.Cell [VS.SHO.AS.2RL]/
{2}+[VS.SHO.AS.
3RL]/{3}+
[VS.SHO.AS.4RL]/
{4}+[VS.SHO.AS.
5RL]/{5}+
[VS.SHO.AS.6RL]/
{6}))-{1}
% Soft ([SHO.SuccRLAddUE
Hando Side]+
ver [SHO.SuccRLDelUESi
Measu de])/
VS.SHO.Success.Cell.Rate
rement ([SHO.AttRLAddUESi
per cell de]+
[SHO.AttRLDelUESide
])*{100.00}
nu HSDP -
mb A
VS.HSDPA.UE.Mean.Cell er Measu
rement
per cell
HSDP -
A
VS.HSDPA.MeanChThroughput.T byt
Measu
otalBytes e
rement
per cell
dB TX -
m and
RX
Power
VS.MeanRTWP
Measu
rement
<per
Cell>
dB TX -
m and
RX
Power
VS.MinRTWP
Measu
rement
<per
Cell>
nu HSUP -
mb A
VS.HSUPA.UE.Mean.Cell er Measu
rement
per cell
HSUP -
A
VS.HSUPA.MeanChThroughput.T byt
Measu
otalBytes e
rement
per cell
CS Radio Access
RRC
Success Rate = RRC
MR
Connection
Measu
CS Radio Access Success Rate % Establishment Success
rement
Rate x CS RAB
<per
Establishment Success
Cell>
Rate x 100%
RRC
MR
PS Radio Access Success Rate Measu
% -
(Cell) rement
<per
Cell>
RRC
MR
Measu
AMR Call Drop Ratio (Cell) % -
rement
<per
Cell>
RRC
MR
Measu
PS Service Drop Ratio % -
rement
<per
Cell>
Soft ([SHO.SuccRLAddUE
Hando Side]+
ver [SHO.SuccRLDelUESi
Measu de])/
Soft Handover Success Ratio(Cell) %
rement ([SHO.AttRLAddUESi
per cell de]+
[SHO.AttRLDelUESide
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GU
Object Type
UCell Group
Subreport Information
Subrepo Counter Co Functi Formula
rt Name un on
ter Subse
Un t
it
Comparisi RRC -
on Report MR
Between No Measu
VS.Periodic.MrRpt.RSCP.0
Three- ne rement
sector <per
And Cell>
Multi-
Sector On RRC -
Cell MR
No Measu
VS.Periodic.MrRpt.RSCP.1
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.2
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.3
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.4
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.5
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.6
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.7
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.8
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.9
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.0
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.1
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.2
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.3
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.4
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.5
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.6
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.7
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.8
ne rement
<per
Cell>
No Soft (([VS.SHO.AS.1RL]+
ne Hando [VS.SHO.AS.2RL]+
ver [VS.SHO.AS.3RL]+
Measu [VS.SHO.AS.4RL]+
rement [VS.SHO.AS.5RL]+
per cell [VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
VS.SHO.Factor.RL.Cell [VS.SHO.AS.2RL]/
{2}+[VS.SHO.AS.
3RL]/{3}+
[VS.SHO.AS.4RL]/
{4}+[VS.SHO.AS.
5RL]/{5}+
[VS.SHO.AS.6RL]/
{6}))-{1}
% Soft ([SHO.SuccRLAddUE
Hando Side]+
ver [SHO.SuccRLDelUESi
Measu de])/
VS.SHO.Success.Cell.Rate
rement ([SHO.AttRLAddUESi
per cell de]+
[SHO.AttRLDelUESide
])*{100.00}
nu HSDP -
mb A
VS.HSDPA.UE.Mean.Cell er Measu
rement
per cell
HSDP -
A
VS.HSDPA.MeanChThroughput.T byt
Measu
otalBytes e
rement
per cell
dB TX -
m and
RX
Power
VS.MeanRTWP
Measu
rement
<per
Cell>
dB TX -
m and
RX
Power
VS.MinRTWP
Measu
rement
<per
Cell>
nu HSUP -
mb A
VS.HSUPA.UE.Mean.Cell er Measu
rement
per cell
HSUP -
A
VS.HSUPA.MeanChThroughput.T byt
Measu
otalBytes e
rement
per cell
CS Radio Access
RRC
Success Rate = RRC
MR
Connection
Measu
CS Radio Access Success Rate % Establishment Success
rement
Rate x CS RAB
<per
Establishment Success
Cell>
Rate x 100%
RRC
MR
PS Radio Access Success Rate Measu
% -
(Cell) rement
<per
Cell>
RRC
MR
Measu
AMR Call Drop Ratio (Cell) % -
rement
<per
Cell>
RRC
MR
Measu
PS Service Drop Ratio % -
rement
<per
Cell>
Soft ([SHO.SuccRLAddUE
Hando Side]+
ver [SHO.SuccRLDelUESi
Measu de])/
Soft Handover Success Ratio(Cell) %
rement ([SHO.AttRLAddUESi
per cell de]+
[SHO.AttRLDelUESide
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GU
Object Type
RNC NodeB
Subreport Information
Subrepo Counter Co Functi Formula
rt Name un on
ter Subse
Un t
it
Comparisi RRC -
on Report MR
Between No Measu
VS.Periodic.MrRpt.RSCP.0
Three- ne rement
sector <per
And Cell>
Multi-
Sector On RRC -
NodeB MR
No Measu
VS.Periodic.MrRpt.RSCP.1
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.2
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.3
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.4
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.5
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.6
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.7
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.8
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.9
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.0
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.1
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.2
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.3
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.4
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.5
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.6
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.7
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.8
ne rement
<per
Cell>
No Soft (([VS.SHO.AS.1RL]+
ne Hando [VS.SHO.AS.2RL]+
ver [VS.SHO.AS.3RL]+
Measu [VS.SHO.AS.4RL]+
rement [VS.SHO.AS.5RL]+
per cell [VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
VS.SHO.Factor.RL.Cell [VS.SHO.AS.2RL]/
{2}+[VS.SHO.AS.
3RL]/{3}+
[VS.SHO.AS.4RL]/
{4}+[VS.SHO.AS.
5RL]/{5}+
[VS.SHO.AS.6RL]/
{6}))-{1}
% Soft ([SHO.SuccRLAddUE
Hando Side]+
ver [SHO.SuccRLDelUESi
Measu de])/
VS.SHO.Success.Cell.Rate
rement ([SHO.AttRLAddUESi
per cell de]+
[SHO.AttRLDelUESide
])*{100.00}
nu HSDP -
mb A
VS.HSDPA.UE.Mean.Cell er Measu
rement
per cell
HSDP -
A
VS.HSDPA.MeanChThroughput.T byt
Measu
otalBytes e
rement
per cell
dB TX -
m and
RX
Power
VS.MeanRTWP
Measu
rement
<per
Cell>
dB TX -
m and
RX
Power
VS.MinRTWP
Measu
rement
<per
Cell>
nu HSUP -
mb A
VS.HSUPA.UE.Mean.Cell er Measu
rement
per cell
HSUP -
A
VS.HSUPA.MeanChThroughput.T byt
Measu
otalBytes e
rement
per cell
CS Radio Access
RRC
Success Rate = RRC
MR
Connection
Measu
CS Radio Access Success Rate % Establishment Success
rement
Rate x CS RAB
<per
Establishment Success
Cell>
Rate x 100%
RRC
MR
PS Radio Access Success Rate Measu
% -
(Cell) rement
<per
Cell>
RRC
MR
Measu
AMR Call Drop Ratio (Cell) % -
rement
<per
Cell>
RRC
MR
Measu
PS Service Drop Ratio % -
rement
<per
Cell>
Soft ([SHO.SuccRLAddUE
Hando Side]+
ver [SHO.SuccRLDelUESi
Measu de])/
Soft Handover Success Ratio(Cell) %
rement ([SHO.AttRLAddUESi
per cell de]+
[SHO.AttRLDelUESide
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GU
Object Type
UCell Group
Subreport Information
Subrepo Counter Co Functi Formula
rt Name un on
ter Subse
Un t
it
Simple RRC -
Report Of MR
Three- No Measu
VS.Periodic.MrRpt.RSCP.0
sector ne rement
And <per
Multi- Cell>
Sector On
The Same RRC -
Time MR
No Measu
VS.Periodic.MrRpt.RSCP.1
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.2
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.3
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.4
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.5
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.6
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.7
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.8
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.RSCP.9
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.0
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.1
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.2
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.3
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.4
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.5
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.6
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.7
ne rement
<per
Cell>
RRC -
MR
No Measu
VS.Periodic.MrRpt.EcNo.8
ne rement
<per
Cell>
No Soft (([VS.SHO.AS.1RL]+
ne Hando [VS.SHO.AS.2RL]+
ver [VS.SHO.AS.3RL]+
Measu [VS.SHO.AS.4RL]+
rement [VS.SHO.AS.5RL]+
per cell [VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
VS.SHO.Factor.RL.Cell [VS.SHO.AS.2RL]/
{2}+[VS.SHO.AS.
3RL]/{3}+
[VS.SHO.AS.4RL]/
{4}+[VS.SHO.AS.
5RL]/{5}+
[VS.SHO.AS.6RL]/
{6}))-{1}
% Soft ([SHO.SuccRLAddUE
Hando Side]+
ver [SHO.SuccRLDelUESi
Measu de])/
VS.SHO.Success.Cell.Rate
rement ([SHO.AttRLAddUESi
per cell de]+
[SHO.AttRLDelUESide
])*{100.00}
nu HSDP -
mb A
VS.HSDPA.UE.Mean.Cell er Measu
rement
per cell
HSDP -
A
VS.HSDPA.MeanChThroughput.T byt
Measu
otalBytes e
rement
per cell
dB TX -
m and
RX
Power
VS.MeanRTWP
Measu
rement
<per
Cell>
dB TX -
m and
RX
Power
VS.MinRTWP
Measu
rement
<per
Cell>
nu HSUP -
mb A
VS.HSUPA.UE.Mean.Cell er Measu
rement
per cell
HSUP -
A
VS.HSUPA.MeanChThroughput.T byt
Measu
otalBytes e
rement
per cell
CS Radio Access
RRC
Success Rate = RRC
MR
Connection
Measu
CS Radio Access Success Rate % Establishment Success
rement
Rate x CS RAB
<per
Establishment Success
Cell>
Rate x 100%
RRC
MR
PS Radio Access Success Rate Measu
% -
(Cell) rement
<per
Cell>
RRC
MR
Measu
AMR Call Drop Ratio (Cell) % -
rement
<per
Cell>
RRC
MR
Measu
PS Service Drop Ratio % -
rement
<per
Cell>
Soft ([SHO.SuccRLAddUE
Hando Side]+
ver [SHO.SuccRLDelUESi
Measu de])/
Soft Handover Success Ratio(Cell) %
rement ([SHO.AttRLAddUESi
per cell de]+
[SHO.AttRLDelUESide
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GU
Object Type
UCell Group
Subreport Information
Subrepo Counter Co Functi Formula
rt Name un on
ter Subse
Un t
it
Capacity HSDP -
Performan A
VS.HSDPA.MeanChThroughput.T byt
ce Measu
otalBytes e
Estimatio rement
n Report per cell
dB TX -
m and
RX
Power
VS.TCP.0
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.1
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.2
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.3
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.4
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.5
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.6
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.7
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.8
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.9
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.10
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.11
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.12
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.13
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.14
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.15
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.16
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.17
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.18
Measu
rement
<per
Cell>
No TX -
ne and
RX
Power
VS.TCP.19
Measu
rement
<per
Cell>
% TX -
and
RX
Power
DLLoad
Measu
rement
<per
Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
[VS.RRC.AttConnEstab.OrgL
PSig]+
[VS.RRC.AttConnEstab.TmH
PSig]+
[VS.RRC.AttConnEstab.TmL
PSig]+
[VS.RRC.AttConnEstab.Rest]
))*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
IUR Interface
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
21.6.2 HO Report
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
USN
Object Type
USN and SGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
USN
Object Type
USN and SGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
USN
Object Type
MTP3 link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
USN
Object Type
USN and SGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
UGW
Object Type
UGW and GGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
UGW
Object Type
UGW and GGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
UGW
Object Type
UGW and GGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SGSN
Object Type
USN and SGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SGSN
Object Type
USN and SGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SGSN
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SGSN
Object Type
MTP3 link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SGSN
Object Type
USN and SGSN
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
SG7000
Object Type
Link Set
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
SG7000
Object Type
M3UA ASSOAS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
SG7000
Object Type
M3UA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
M3UA Link Set
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
SG7000
Object Type
SG7000NE
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
CPU Load
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
DSP Report
NE Type
SG7000
Object Type
DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
SG7000
Object Type
Link Set
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
DB-based Report
NE Type
SG7000
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
SG7000
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
DB-based Report
NE Type
SG7000
Object Type
Link Set
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
SG7000
Object Type
Link Set
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
SG7000
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Duration of s LINK -
availability
Duration of s LINK -
unavailability
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
DB-based Report
NE Type
SG7000
Object Type
M3UA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
SG7000
Object Type
M3UA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Duration of s M3UA -
availability LINK
Duration of s M3UA -
unavailability LINK
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
SG7000
Object Type
SG7000NE
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
M3UA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
SPSNE
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
M3UA Link Set
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
M3UA ASSOAS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
Link Set
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Diameter Agent
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Diameter Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Diameter Agent
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Diameter Agent
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
M2PA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
M2PA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
M3UA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
M3UA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
M2PA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
SPSV3
Object Type
M3UA Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
SPSV3
Object Type
SPSV3
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NE Type
SPSV3
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Number of SIF And None MTP Link [Number of SIF And SIO
SIO Octets Measuremen Octets Transmitted]/[Number
Transmitted per t of Message Signal Units
MSU Transmitted]
Number of SIF And None MTP Link [Number of SIF And SIO
SIO Octets Received Measuremen Octets Received]/[Number of
per MSU t Message Signal Units
Received]
Report Type
Simple Report
NE Type
SPSV3
Object Type
MTP Linkset
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Report Type
Simple Report
NE Type
SPSV3
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
DSP Report
Report Type
Simple Report
NE Type
SPSV3
Object Type
MTP Destination Signaling Point
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Duration of s MTP -
Destination Destination
Signaling Point Signaling
Inaccessible Point
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
MTP Destination Signaling Point
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Duration of s MTP -
Destination Destination
Signaling Point Signaling
Inaccessible Point
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
Number of SIF And None MTP Link [Number of SIF And SIO
SIO Octets Measuremen Octets Transmitted]/[Number
Transmitted per t of Message Signal Units
MSU Transmitted]
Number of SIF And None MTP Link [Number of SIF And SIO
SIO Octets Received Measuremen Octets Received]/[Number of
per MSU t Message Signal Units
Received]
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
MTP Linkset
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
MTP Linkset
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Link
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
SPSV3
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
Whole Network
Object Type
Whole Network
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
MO Incoming % S-CSCF -
Session Answer Access Type
Rate MO
Incoming
Session
Measuremen
t
MO Outgoing % S-CSCF -
Session Answer Access Type
Rate MO
Outgoing
Session
Measuremen
t
MT Incoming % S-CSCF -
Session Answer Access Type
Rate MT
Incoming
Session
Measuremen
t
MT Outgoing % S-CSCF -
Session Answer Access Type
Rate MT
Outgoing
Session
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1 BSC
29.2 BTS
29.3 Cell
29.4 EGPU/EXPU(CP Subsystem Detail Report)
29.5 EGPU/EXPU(CS UP Subsystem Detail Report)
29.6 EGPU/EXPU(PS UP Subsystem Detail Report)
29.1 BSC
29.1.1 A Interface
Report Type
Simple Report
NE Type
2GBSC
Object Type
FEGE
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
FEGE
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
MTP3LNK
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
FEGE
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
DPC Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
A A Interface % A-Interface -
Interface Resource Utilization Circuit
User Rate (TDM) Measuremen
Plane(T t
DM)
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3 Board
Report Type
Simple Report
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.3 DPU(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.4 EGPU/EXPU(CP)(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
SubSys Virtual Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
SubSys Virtual Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
SubSys Virtual Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.7 INT(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.8 INT(Signaling)(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
CPU
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.9 INT(User)(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.12 RMP(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
CPU
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.13 SCU(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
CPU
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.14 SCU(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
Inter-Subrack Traffic Object
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
Inter-Subrack Traffic Object
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.17 TNU(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.18 XPU(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.4 Gb
29.1.4.1 GB over FR
Report Type
Simple Report
NE Type
2GBSC
Object Type
BC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
GB over GB Downlink BC % BC -
FR Utilization Rate (GB Measuremen
over FR) t
GB Downlink BC None BC -
Overload Number Measuremen
(GB over FR) t
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.4.2 GB over IP
Report Type
Simple Report
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.2 BTS
Report Type
Simple Report
NE Type
2GBSC
Object Type
BTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
PPP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
BTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
2GBSC
Object Type
BTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.2.3.1 Abis(TDM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
BTS
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.3 Cell
29.3.1 Um(CS)
29.3.1.1 Um(CS)
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RF Resource % Channel -
Utilization Rate State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.3.2 Um(PS)
29.3.2.1 Um(PS)
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
PS Resource % PDCH -
Utilization Rate Resource
Capability
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
SubSys
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
SubSys
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
SubSys
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.1 Cell
30.2 NodeB
30.3 RNC
30.4 DPU DSP Utilization Rate of one Physical Subrack
30.5 DPU DSP Utilization Rate of RNC
30.6 EGPU(CP Subsystem Detail Report)
30.7 EGPU(UP Subsystem Detail Report)
30.8 EGPU CP Breakdown Report
30.9 MPU CPU Utilization Rate of RNC
30.10 Port traffic analysis
30.11 RTWP Breakdown
30.12 Breakdown Report
30.13 SPU CPU Utilization Rate of RNC
30.14 TCP Breakdown
30.1 Cell
30.1.1 Code
30.1.1.1 Code
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.1.3 Power
30.1.3.1 RTWP
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.1.3.2 TCP
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.1.3.3 UL EUN
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
UL threshold of % Algorithm -
other services Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.2 NodeB
30.2.1 CE
30.2.1.1 CE Resource
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
CE DL License CE % Algorithm -
Resource Resource Utilization Measuremen
Rate t per NodeB
UL License CE % Algorithm -
Resource Utilization Measuremen
Rate t per NodeB
DL CE Capacity % Algorithm -
Utilization Rate Measuremen
t per NodeB
UL CE Capacity % Algorithm -
Utilization Rate Measuremen
t per NodeB
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.2.2 CNBAP
30.2.2.1 CNBAP
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.2.4 Iub
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GBTS
Object Type
NodeB Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3 RNC
30.3.1 Board
30.3.1.1 DPU(BSC6900UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
3G DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.2 EGPU(CP)(BSC6910UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
SubSys Virtual Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.3 EGPU(UP)(BSC6910UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
SubSys Virtual Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.4 INT(BSC6900UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
CPU
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.7 MPU(BSC6900UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.8 RMP(BSC6910UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
CPU
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.9 SCU(BSC6900UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.10 SCU(BSC6910UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
CPU
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
Inter-Subrack Traffic Object
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
Inter-Subrack Traffic Object
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.13 SPU(BSC6900UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.2 Iu-CS
Report Type
Simple Report
NE Type
3GRNC
Object Type
MTP3B DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
MTP3B DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.3 Iu-PS
Report Type
Simple Report
NE Type
3GRNC
Object Type
MTP3B DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
MTP3B DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.4 Iur
Report Type
Simple Report
NE Type
3GRNC
Object Type
MTP3B DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
MTP3B DSP
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.5 License
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
CNOPERATOR
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
CNOPERATOR
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
VS.XPU.CPULOA % XPU -
D.MEAN Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
Frame
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
SubSys
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
SubSys
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
DCCC&LDR&STA None RB -
TE TRANS Procedure
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
FEGE
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
HSDPCCH UL % Measuremen -
Power Load of t of locell
HSDPA (CQI) power
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
DCCC&LDR&STA None RB -
TE TRANS Procedure
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
31.1 eNodeB
31.2 LTE Cell
31.3 LTE Cell Group Traffic Trend Report
31.1 eNodeB
31.1.1 Board
31.1.1.1 BBP
Report Type
Simple Report
NE Type
4GBTS
Object Type
BBU Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
31.1.1.2 MPT
Report Type
Simple Report
NE Type
4GBTS
Object Type
BBU Board
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
eNodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
eNodeB Operator
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
31.1.3 RscGroup
Report Type
Simple Report
NE Type
4GBTS
Object Type
RscGroup
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
RscGroup
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
RscGroup % Resource -
Bandwidth Peak Group
Utilization Rate Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
eNodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
eNodeB
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
31.2.1 Channel
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
PRACH Channel % RA -
Utilization Measuremen
Rate_Non- t
Contention Preamble
(TDD)
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
PRACH Channel % RA -
Utilization Measuremen
Rate_Non- t
Contention Preamble
(FDD)
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
Operator
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
Operator
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
31.2.3 VoIP
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
LTE Cell Group
Subreport Information
Subrep Counter Coun Function Formula
ort ter Subset
Name Unit
NOTE
To obtain the information about the previous counters, use the following methods:
l Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
l For system counters, refer to NE Reference Information in PRS Online Help.
l For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.