Professional Documents
Culture Documents
Tutorial No.3
Q1 Welded plate girder shown in Figure below, is a simply supported
plate girder with a span of 30 m. The compression flange is
laterally restrained against lateral torsional buckling throughout the
span. For the loading specified below, design a transversely
stiffened plate girder in S275 steel.
Actions
(a) Assuming the size depth of web is 2000 x 15mm and 750 x 50
mm for flanges. Check the cross-section classification.
(d) Sketch the details of the plate girder including the arrangement
of the stiffeners.
EC 3-1-1
EC3-1-5/A.3 (1)
EC 3-1-1
EC 3-1-1
EC 3-1-5/ 8(1)
EC 3-1-5 /5.3(3)
EC 3-1-5/5.3
EC 3-1-5/5.2
BS EN 10025-2
EC 3-1-5/9.4(2)
EC 3-1-1/6.3.1.2 (4)
EC 3-1-5/9.3.3 (3)
EC 3-1-5/ N.A 2.7
EC 3-1-5/4.5.3