You are on page 1of 6

361997410.

xls

07/31/2017 16
361997410.xls

07/31/2017 26
361997410.xls

VOIP Service
12.2kbpsAMR voice codec rate
12.2kbps=voice frame32bytesevery 20ms
RTP overload12+voice frame
UDP overload8+Upper layer
IP overloadipv4=20ipv6=40+ Upper layer=72bytes
Compress of ROHC: header6bytes +32=38bytes+PDCP2=40bytes
RLC1+Upper Layer=41
MAC1+Upper Layer=42
Physical frame=42 (Before adding CRC)

Non-VOIP Service

Avg packet size=300bytes (IP Packet, typical baseline)

PDCP(2)+Upper Layer=302
RLC2+Upper Layer=304
MAC3+Upper Layer=307
Physical frame=307 (Before adding CRC)

Overhead Calculation
1For VoIP, becasue of ROHC, the VoIP overhead will be improved very well, whose efficie
From IP layer to Phy layer, the efficiency =72/42=171%
2Non-VoIP service: the
=300/307=97.7%
a persentage of 5% out of mixed services, then the finalized overall efficiency =5%*171%
Phy layer, the final efficiency over 100% is normal for the sake of the VoIP component)

Notes 1IEEE ever made a statistics over IP packet size distribution from Internet, the resulting avera
eRAN 1.0, to reserve sufficient safety margin for system capacity, the processing ability is determined
bytes.

07/31/2017 36
361997410.xls

07/31/2017 46
361997410.xls

LTE 3GPP protocol


App layere.g.
ftphttp,rtp
UDP or TCP
IP
PDCP(Compress)
RLC LTE Air INF
Protocol
MAC
Stack
PHY

LTE 3GPP protocol


App layere.g.
ftphttp,rtp
UDP or TCP
IP
PDCP(Compress)
RLC LTE Air INF
Protocol
MAC
Stack
PHY

d very well, whose efficiency would be even over 100%.

2Non-VoIP service: the efficiency from IP layer to Phy layer


3Assuming voip taking
rall efficiency =5%*171%+95%*97.7%=101% (From IP layer to
f the VoIP component)

m Internet, the resulting average size is 300 bytes or so. For Huawei LTE
cessing ability is determined on a base of mean IP packet size of 150

07/31/2017 56
361997410.xls

07/31/2017 66

You might also like