Professional Documents
Culture Documents
1
D-MAX Load Specifications
TABLE OF CONTENTS
Table of Contents -2
General Information -3
Certifications and Environmental Compatibility -4
Vibration and Shock -4
Sensor Ports
Input -5
Output -6
Drive Ports -8
Parallel Port -9
2
D-MAX Load Specifications
GENERAL
3
D-MAX Load Specifications
Product Certification - CE
Protection Class - IP 54
(Controller)
Protection Class - IP 54
(Operator Interface)
4
D-MAX Load Specifications
- Sensor Input -
5
D-MAX Load Specifications
DAC-004 - 0-10mA each output (4 outputs total)
-Sensor Output-
6
D-MAX Load Specifications
FIFE Feeler-Palm Sensor
SE-28 (87376-001) - 40mA
SE-29 (61395-004) - 40mA
7
D-MAX Load Specifications
* The Display Indication may be viewed in the Actuator Menu, under Hardware IOs.
** The Voltage supplied to the D-MAX Controller may be up to a maximum of 51 VDC. The D-MAX
Controller will regulate the voltage to the proper level required by the attached motor/valve.
*** 1.3 A is applied to the 1.6 A motor.
8
D-MAX Load Specifications
PARALLEL PORT X1
Outputs
Two Outputs, switchable to either high source or low sink.
High Source: - 10.3 VDC; 200mA (Open Collector)
Low Sink: - 1.0VDC; 500mA (Open Collector to GND)
Inputs
Six Digital Inputs
Low Level: - 0 0.9VDC
High Level: - 3.6 24VDC, max 6mA