Professional Documents
Culture Documents
PTC1000
PTP Clock Converter
Overview
PTC1000 Clock Converter realizes the conversion from PTP to IRIG-B and PPS (Pulse Per Second). This
allows the industrial devices that are equipped with IRIG-B clock interfaces and PPS interface to
conveniently access PTP network. This provides economic solution for evolving legacy network into
future-proofing PTP network and achieve high precision synchronization required in industrial
control system.
Key Features
Support ITU-T.G.8261/G.8262 SyncE, the synchronization accuracy can reach ±50ns with SyncE enabled.
Supports IRIG-B000, B001, B002, B003, B004, B005, B006, B007, B120, B121, B122, B123, B124, B125, B126, B127.
Product Specifications
>Software Functions
-Management & Maintenance
www.kyland.com
Precise Timing Solutions
-Clock Management
>Product Specifications
-Standard
IEEE 802.3i(10Base-T)
IEEE 802.3u(100Base-TX and 100Base-FX)
IEEE 1588-2008(PTPv2)
-Interface
PTP port:
Alarm contact:
3-pin 5.08mm-spacing plug-in terminal block, 250 VAC/220 VDC Max, 2A Max, 60 W Max
Clock Signal:
PPS: TTL level +5V, 50Ω, Rising edge based, pulse width 20ms-200ms, stepped by 20ms (configurable
IRIG-B DC:
TTL level +5V, 600Ω, Rising edge based, BNC connector or 2-pin
IRIG-B AM: Vp-p, 3V-10V (configurable in software, default Vp-p: 4.5V), 600Ω, Modulation Ratio 3:1,
4:1, 5:1, 6:1 (optional, default modulation ratio is 3:1), BNC connector or 2-pin 5.08mm-spacing plug-
in terminal block
www.kyland.com
Precise Timing Solutions
-LED
-Power Requirements
Power input:
24VDC(18-36VDC)
110VDC(77-154VDC)
100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC)
Power terminal:
Power consumption<4w
-Physical Characteristics
Housing: Metal
Cooling: Natural cooling, fanless
Dimensions(WxHxD):
-Environmental Limits
-Quality Assurance
www.kyland.com
Precise Timing Solutions
Warranty: 5 years
-Approvals
-Industry Standard
EMI:
EMS:
IEC61000-4-2(ESD) ±8kV(contact),±15kV(air)
IEC61000-4-3(RS) 10V/m(80MHz-2GHz)
Data Port:±2kV
IEC61000-4-6(CS) 3V(10kHz-150kHz);
10V(150kHz-80MHz)
Machinery:
IEC60068-2-6 (vibration),
IEC60068-2-27 (shock),
IEC60068-2-32 (free fall)
Mechanical Drawing
www.kyland.com
Precise Timing Solutions
Ordering Information
PTC1000-Ports-Connector-XX-PS
Ports
1S 1x100Base-FX, single-mode fiber port
1M 1x100Base-FX, multi-mode fiber port
1T 1x10/100Base-T(X) RJ45 port
Connector 100M fiber port specifications
SC05 SC connector, multi-mode, 1310nm, 5km
ST05 ST connector, multi-mode, 1310nm, 5km
FC05 FC connector, multi-mode, 1310nm, 5km
SC40 SC connector, single-mode, 1310nm, 40km
ST40 ST connector, single-mode, 1310nm, 40km
FC40 FC connector, single-mode, 1310nm, 40km
SC60 SC connector, single-mode, 1310nm, 60km
SC80 SC connector, single-mode, 1550nm, 80km
N/A No 100M fiber port
XX Connector of the second IRIG-B port
The second channel of IRIG-B out is 2-pin 5.08 mm-spacing plug-in terminal
None
block
1 The second channel of IRIG-B out is BNC connector
PS
HV 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC),single power input
H2-H2 110VDC(77-154VDC), redundant power inputs
L2-L2 24-48VDC(18-72VDC), redundant power inputs
Accessories
DT-FCZ-RJ45-01 Dustproof cover for RJ45 port
Version:2018-02-12 10:38:20
www.kyland.com