Professional Documents
Culture Documents
Customer Assistance
Belt Clip
Battery
Compartment
Battery Door
Antenna Latch
External Speaker/
Microphone Jack
On/Off
Volume
Knob
Key Lock
Button
Talk
Button Compass
Button
Channel
Up/Down
Buttons
Backlit
LCD
Display
HiMedLow
Power Button
Charger
Jack
Call
Light/ Button
Max Range
Button Mode
Button
Speaker/
Microphone
3 English
Introduction
Product Features Introduction Operation Customer Assistance Warranty
On/Off Power Turning On Your microTALK Radio Mode Button Scrolling Through
To Turn On Your Radio: the Mode Function
1. Rotate the On/Off Volume knob clockwise By scrolling through the Mode function, you will
to turn On your radio and adjust the volume. be able to select or turn On preferred features of
A series of tones will indicate the radio is On. your microTALK radio. When scrolling through
the Mode function, your radio features will be
Your microTALK radio is now in Standby Mode, displayed in the same predetermined order:
ready to receive transmissions. The radio is
always in Standby Mode, except when the Set Privacy Codes
Talk, Call or Mode buttons are pressed. Set NOAA All Hazards Radio Channel
Set NOAA All Hazards Alert
Battery Low Battery Low Set Stopwatch
Set Clock
Your microTALK radio has a battery level meter
that shows when battery power is decreasing. Set Alarm
The greater the number of ascending bars visible, Set VOX On/Off
the stronger the battery level. When the battery Set VOX Sensitivity Level
level is low, the last bar will flash indicating Set Memory Location
your batteries should be replaced or recharged, Set Channel Scan
if using rechargeable batteries. Set Privacy Code Scan
Set Memory Scan
Battery Save Mode Auto Battery Save Set VibrAlert and/or Call Alert
Set Call Tones
Your microTALK radio has a unique circuit
designed to extend battery life. If there are Set Roger Beep On/Off
no transmissions within ten (10) seconds, Set Keystroke Tones On/Off
the radio will automatically switch to Battery Channel Button Channels
Save Mode and Power Saver icon will flash
in the display. This will not affect the radios To Select a Channel:
ability to receive incoming transmissions. 1. With the radio On, select any of the
22 channels by pressing the Channel Up
Talk Button Communicating with Another Person or Channel Down button.
Channel Number
To Talk To Another Person:
Both radios must be tuned to the
1. Press and hold the Talk button. same channel to communicate.
2. With the microphone about two (2)
2 inches (5 cm) inches (5 cm) from your mouth, Channels 1 through 7 are shared with FRS/
From Mouth
speak in a normal voice. GMRS. Channels 8 through 14 are FRS only.
Channels 15 through 22 are GMRS only.
3. Release the Talk button when you are
finished talking and listen for a response. See page 25 for FRS/GMRS frequency
You cannot receive incoming calls while allocations and compatibility charts.
pressing the Talk button.
Both radios must be tuned to
6 English the same channel to communicate. Nothing comes close to a Cobra 7
Operation
Using Your Radio Introduction Operation Customer Assistance Warranty
NOAA All Hazards Radio channels transmitting display of split times. After starting the timer,
Alert Icon
in your area. you can view an interim split time while the
You can also program your microTALK radio first timer continues to run.
to sound a tone alert when a local NOAA Mode Button To Activate Stopwatch Mode:
channel activates an Emergency All Hazards 1. Press the Mode button until the Stopwatch
Alert. This will warn you of weather, chemical, icon and OO:oo:oo is displayed in the LCD.
and other civilian emergencies.
2. Press the Channel Up button to
Mode Button To Listen to All Hazards Radio channels: start the stopwatch.
Stopwatch Icon
1. Press the Mode button until the Weather 3. Press the Channel Up button again
(All Hazards Radio) icon, the currently to stop the stopwatch.
selected All Hazards Radio channel,
and signal strength are displayed. To restart and stop the stopwatch,
Hazards Radio Icon repeat step 2 and 3.
2. Use the Channel Up or Channel Down Channel Up
button to change All Hazards Radio channels. 4. Press the Mode button to exit Stopwatch
Mode and proceed to other functions.
3. Weather (All Hazards Radio) icon will continue
to be displayed when All Hazards Radio is On. To Activate Split-Time in Stopwatch Mode:
Channel Button
a. Press the Mode button to proceed 1. Press the Mode button until the Stopwatch
Mode Button
to other functions. icon and OO:oo:oo is displayed in the LCD.
b. Press the Lock button to exit All 2. After starting the stopwatch (see above),
Hazards Radio channel mode and press the Channel Down button to start the
return to Standby Mode. split-time timer. The display will stop, but the
Stopwatch Icon stopwatch will continue in the background.
Mode Button To Turn On All Hazards Alert:
3. Press the Channel Down button to return
1. Press the Mode button until the Alert icon flashes
to the stopwatch. (To stop the stopwatch,
and the current On or Off setting is displayed.
see above.)
2. Press the Channel Up or Channel Down
To restart and stop the Split-Timer,
Alert Icon button to turn All Hazards Alert On or Off. Channel Down
repeat step 2 and 3.
3. Alert icon will continue to be displayed
4. Press the Mode button to exit Stopwatch
when All Hazards Alert is On.
Mode and proceed to other functions.
a. Press the Mode button to enter the new
Channel Button
setting and proceed to other functions.
b. Press the Lock button or do not press any
buttons for 15 seconds to enter the new
setting and return to Standby Mode.
c. Press the Talk button to enter the new
settings and return to Standby Mode.
10 English Nothing comes close to a Cobra 11
*National Oceanographic and Atmospheric Administration
Operation
Using Your Radio Introduction Operation Customer Assistance Warranty
Lock Button To reset the display to OO:oo:oo, press the Mode Button Alarm
Lock button. You can use the time keeping feature of your
While in Stopwatch Mode, your microTALK microTALK radio as an alarm.
radio will alert you to incoming calls, but the To Activate Your microTALK Radio Alarm:
LCD will continue to show the stopwatch display. Alarm Icon 1. Press the Mode button until the Alarm
You can also transmit as normal with the Talk
icon flashes and the current On or Off
button or in VOX Mode. When you do, the LCD
setting is displayed.
will automatically return to normal display.
Once you have finished transmitting, the radio 2. Press the Channel Up or Channel Down
will automatically return to Stopwatch Mode. button to turn the alarm On or Off.
Mode Button To Set the Alarm:
The Compass operation cannot be
used while in Stopwatch Mode. 1. Press the Mode button until the Alarm
icon flashes and the current On or Off
setting is displayed.
Mode Button Clock
Alarm Icon 2. Press the Lock button. The hour will flash.
Your microTALK radio displays the current
time and appropriate AM/PM indication. 3. Press the Channel Up or Channel Down
button to set the hour.
To Activate Clock Mode:
4. Repeat steps 2 and 3 to set minutes
Clock Mode 1. Press the Mode button until the clock is displayed. and AM/PM.
Lock Button
2. Press the Mode button to exit Clock Mode 5. a. After setting AM/PM, press the Lock
and proceed to other functions. button to enter the Alarm time, turn Alarm
To Set the Clock: setting On and to return to Standby Mode.
Lock Button 1. While in Clock Mode, press the Lock button. b. Press the Mode button to enter the
Alarm Set Hour
The hour will flash on the display. Alarm time, turn Alarm setting On
2. Press the Channel Up or Channel Down and proceed to other functions.
button to set the hour. c. Press the Talk button to enter the Alarm
Set Clock 3. Repeat steps 1 and 2 to set minutes time, turn Alarm setting On and return
and AM/PM. Channel Button to Standby Mode.
4. Press the Mode button to exit the Set Clock
feature and proceed to other functions.
While in Clock Mode, your microTALK radio will
alert you to incoming calls, but the LCD will continue
to show the Clock display. You can also transmit
as normal with the Talk button or in VOX Mode.
When you do, the LCD will automatically return to
normal display. Once you have finished transmitting,
the radio will automatically return to Clock Mode.
The Compass operation cannot be
12 English used while in Clock Mode. Nothing comes close to a Cobra 13
Operation
Using Your Radio Introduction Operation Customer Assistance Warranty
Mode Button To Recall a Stored Memory Channel Location: If you press the Talk button while scanning
1. Press the Mode button until the Memory icon and not within ten (10) seconds of receiving
and the memory channel location (1 through transmission, you will transmit on the last
10) flashes on the display. channel you transmitted or received on.
2. Press the Channel Up or Channel Down button If you do not press any button within ten
Memory Icon
to select a memory channel location. (10) seconds, your radio will automatically
resume scanning main channels.
3. a. Press the Talk button to transmit on the
selected memory channel and return to Channel Button To Scan Privacy Codes:
Standy Mode on that memory channel. 1. While in Standby Mode, press the Channel Up
Channel Button
b. Press the Mode button to exit the Memory or Channel Down button to choose the main
Mode without changing the memory channel channel you wish to scan.
setting and proceed to other functions. Select Channel 2. Press the Mode button until the Scan icon and
the privacy code number flashes on the display.
Scan
3. Press the Channel Up or Channel Down button
Your microTALK radio can automatically scan and your radio will begin scanning privacy
main channels (1 through 22) or the privacy codes within the main channel you selected.
codes (00 through 38) within one (1) main Mode Button
4. The Scan icon will continue to be displayed
channel, or memory locations.
when scan is On. Your radio will continue to
Mode Button To Scan Main Channels: scan privacy codes and stop as incoming
1. Press the Mode button until the Scan icon and transmission is detected. Your radio will
the main channel number flashes on the display. Scan Privacy Codes remain on that channel and privacy code for
2. Press the Channel Up or Channel Down button ten (10) seconds. During this time, you can:
Scanning Channels to begin scanning the main channels. a. Press and hold the Talk button to
communicate with others. Your radio will
The radio ignores privacy codes remain on that channel and privacy code
while scanning main channels. and return to Standby Mode.
3. The Scan icon will continue to be displayed b. Press the Channel Up or Channel Down
Channel Button
when scan is On. Your radio will continue to button to resume scanning privacy codes.
scan all main channels and stop if an incoming c. Press the Mode button to proceed to memory
transmission is detected. Your radio will scanning (see page 18 for further details).
remain on that channel for ten (10) seconds. If you press the Talk button while scanning
During this time, you can: (see page 16 for further details) and not within
a. Press and hold the Talk button to communicate ten (10) seconds of receiving transmission,
with others. Your radio will remain on that you will transmit on the last channel you
channel and return to Standby Mode. transmitted or received on.
b. Press the Channel Up or Channel Down If you do not press any button within ten
button to resume scanning channels. (10) seconds, your radio will automatically
c. Press the Mode button to proceed to privacy resume scanning privacy codes.
16 English
code scanning (see page 17 for further details). Nothing comes close to a Cobra 17
Operation
Using Your Radio Introduction Operation Customer Assistance Warranty
Mode Button To Scan Memory Locations: Mode Button VibrAlert and Call Tones
1. Press the Mode button until the Scan icon, Your microTALK radio can alert you to
Memory icon, and the memory location incoming signals by sounding an audible
number flashes on the display. call tone, by vibrating silently, or both.
Scanning Memory 2. Press the Channel Up or Channel Down VibrAlert + Ring To Change Call Settings:
button and your radio will begin scanning 1. Press the Mode button until the Call Setting
memory locations. icon flashes on the LCD. The current setting
3. The Scan icon will continue to be displayed (Vibrate + Ring, Vibrate Only, or Ring Only)
when scan is on. Your radio will continue VibrAlert Only is displayed.
Channel Button to scan memory locations and stop if an 2. Press the Channel Up or Channel Down
incoming transmission is detected. Your radio button to change the call setting.
will remain on that memory location for ten
3. a. Press the Mode button to enter the new
(10) seconds. During this time, you can:
Ring Only setting and proceed to other functions.
a. Press and hold the Talk button to
b. Press the Lock button to enter the new
communicate with others. Your radio
setting and return to Standby Mode.
will remain on that memory location
and return to Standby Mode. 10 Call Tone Settings
b. Press the Channel Up or Channel Down Channel Button
You can choose between ten (10) different call
button to resume scanning memory locations. tone settings to transmit a unique call alert.
c. Press the Mode button to proceed to To Change a Call Tone Setting:
next available Mode function.
1. Press the Mode button until the letter C
If you press the Talk button while scanning and the current call tone number (1 through
and not within ten (10) seconds of receiving Mode Button 10) is displayed. The current call tone will
transmission, you will transmit on the last sound for one (1) second.
channel you transmitted or received on.
2. Press the Channel Up or Channel Down
If you do not press any button within ten (10) button to hear the other call tone settings.
seconds, your radio will automatically resume
scanning memory locations.
Call Tone Setting 3. a. Press the Mode button to enter the new
setting and proceed to other functions.
If you want to reduce the number b. Press the Lock button to enter the new
of memory locations being scanned, setting and return to Standby Mode.
you need to un-program all unwanted Channel Button
locations by changing both the main
channel and privacy code to 00.
See page 15 for more details.
Compass Button To Use Your Compass: To Turn Maximum Range Extender Off:
1. After proper calibration (see page 21), press and 1. Press and release the Light/Max Range
release the Compass button. The Compass icon button or change channels.
and your current direction will be displayed.
Lock Button Lock Function
Current Direction
The radio must always be parallel to
The Lock button locks the Channel, Mode,
the ground to give accurate directional Compass and HiMedLow Power buttons
readings. The direction of the antenna to prevent accidental operation.
is the direction displayed in the LCD.
Parallel To Ground Lock Mode
To Turn the Lock Button On or Off:
To exit Compass Mode and return to Standby 1. Press and hold the Lock button for
Mode, press and release the Compass button. two (2) seconds.
Display Illumination A double beep sound is used to confirm
your Lock On or Off request. When in
Light/Max Range To Illuminate Your Display: Lock Mode, the Lock icon will be displayed.
1. Press and release the Light/Max Range button
to illuminate the display for ten (10) seconds. Speaker/Microphone Speaker/Microphone Jack
Your microTALK radio can be fitted with
Auto Squelch/Maximum Range an external Speaker/Microphone, freeing
Your microTALK radio is equipped with Auto your hands for other tasks. See page 28
Squelch, which automatically shuts Off weak for optional accessories ordering instructions.
transmissions and unwanted noise due to Only Cobra authorized accessories are
terrain, conditions, or if youve reached your recommended.
maximum range limit. To attach your Speaker/Microphone:
You can temporarily turn Off Auto Squelch or 1. Open the Speaker/Microphone tab on
turn On Maximum Range Extender, allowing all top of your microTALK radio.
signals to be received and extending the maximum
range of your radio. 2. Insert the plug into the Speaker/
Microphone jack.
Light/Max Range To Temporarily Turn Off Auto Squelch:
1. Press the Light/Max Range button less Signal Strength Signal Strength Meter
than five (5) seconds. Your microTALK radio has a signal strength
If you hear two (2) beeps, you have turned the meter that shows the strength of your incoming
Maximum Range Extender On (see below). and outgoing transmissions. The ascending bars
To Turn Maximum Range Extender On: next to the signal strength indicate the strength
of the signal. The greater the number of bars
1. Press and hold the Light/Max Range button visible, the stronger the signal. The fewer
for at least five (5) seconds until you hear number of bars visible, the weaker the signal.
two (2) beeps which indicates the Maximum
Range Extender is On.
Nominal
to seven (7) miles (11 km). Your range will A. FRS/GMRS B. Receiver
Unit
vary depending on terrain and conditions. Frequency
Allocation and
In flat, open country your radio will Compatibility
1. Sensitivity
For 12 DB SINAD . . . . . . . . . . dBm -121
operate at maximum range. For Call Signal Detection . . . . dBm -121
Reduced Range Buildings and foliage in the path of the Important: Please note that Cobra GMRS
2. Max. Audio Output
signal can reduce the range of the radio. models with 15 channels may designate @10% THD . . . . . . . . . . . . . . . mW 200
different channel numbers for the same 3. Max. S/N Ratio
Dense foliage and hilly terrain will frequency. For example, a Cobra 15 channel @ 1mV RF Input . . . . . . . . . . . dB 50
GMRS model would need to be tuned to
further reduce the range of the radio. channel 11 in order to communicate with
4. Squelch
a) Sensitivity . . . . . . . . . . . . . . dBm -121
On FRS channels 8 through 14, your radio a 22 channel GMRS tuned to channel 15. b) Attack Time . . . . . . . . . . . . . mS 150
Please refer to the chart below for channel/
automatically switches to low power, which frequency number compatibility.
c) Closing Time . . . . . . . . . . . . mS 200
will limit the range the radio can communicate. A = Channel No. For
5. Audio Frequency Response
Reduced Range @ 300 HZ . . . . . . . . . . . . . . . . . dB -3
22 Channel GMRS Models @ 2500 HZ . . . . . . . . . . . . . . . . dB -10
Remember, you can achieve maximum B = Channel No. For 15 6. Signal Displacement BW . . . +/-KHz 5
range by using Maximum Range Channel GMRS Models
7. Adjacent Channel Rejection . . . dB 60
Extender. See page 22 for details. C = Type of Radio Service
D = Frequency in MHz 8. Intermodulation Rejection . . . . dB 65
E = Power in Watts 9. Spurious Response Rejection . dB 55
a = 3.0/2.0/0.5 (selectable)
b = 0.5
Nominal
C. Transmitter
Unit
A B C D E
1 1 FRS/GMRS 462.5625 a 1. Power
2 2 FRS/GMRS 462.5875 a GMRS . . . . . . . . . . . . . . . . . . . .W 3
3 3 FRS/GMRS 462.6125 a FRS Only . . . . . . . . . . . . . . . . .mW 500
4 4 FRS/GMRS 462.6375 a 2. Carrier Frequency Stability . . . Hz 500
5 5 FRS/GMRS 462.6625 a 3. Modulation Limiting . . . . . . . . KHz 2.5
6 6 FRS/GMRS 462.6875 a 4. Carrier Attack Time . . . . . . . . . mS 80
7 7 FRS/GMRS 462.7125 a
5. Audio Frequency Response
8 FRS 467.5625 b @ 300 HZ . . . . . . . . . . . . . . . . . dB -12
9 FRS 467.5875 b @ 2500 HZ . . . . . . . . . . . . . . . . dB +6
10 FRS 467.6125 b
6. Audio Distortion . . . . . . . . . . . . % 3
11 FRS 467.6375 b
7. Hum Noise . . . . . . . . . . . . . . . . dB 30
12 FRS 467.6625 b
13 FRS 467.6875 b 8. Transient Frequency Behavior
14 FRS 467.7125 b a) TX On . . . . . . . . . . . . . . . . . mS 30
b) TX Off . . . . . . . . . . . . . . . . . mS 5
15 11 GMRS 462.5500 a
16 8 GMRS 462.5750 a
Nominal
17 12 GMRS 462.6000 a
18 9 GMRS 462.6250 a D. Power Supply
Unit
19 13 GMRS 462.6500 a
20 10 GMRS 462.6750 a
1. Battery Life (5:5:90 RATIO)
21 14 GMRS 462.7000 a
With Alkaline Batteries . . . . . . . HR 24
22 15 GMRS 462.7250 a
2. Battery Operating Range . . . . . . V 4.2 - 6.0
IMPORTANT NOTICE: FCC LICENSE REQUIRED If you have any questions about operation or installing
This two-way radio operates on GMRS (General Mobile Radio Service) frequencies which your new Cobra product, or if you are missing parts
require an FCC (Federal Communications Commission) license. A user must be licensed prior
to operating on channels 1 through 7 or 15 through 22, which comprise the GMRS channels Please call Cobra first! DO NOT RETURN THIS PRODUCT
of this radio. Serious penalties could result for unlicensed use of GMRS channels, in violation TO THE STORE! See customer service on page 2.
of FCC rules, as stipulated in the Communications Acts Sections 501 and 502 (amended).
Licensed users will be issued a call sign by the FCC, which should be used for station Product Service Questions
identification when operating this radio. GMRS users should also cooperate by engaging If your product should require factory service, please call Cobra first before sending your radio.
in permissible transmissions only, avoiding channel interference with other GMRS users, This will ensure the fastest turn-around time on your repair. You may be asked to send your radio to the
and being prudent with the length of their transmission time. Cobra factory. It will be necessary to furnish the following to have the product serviced and returned.
For licensing information and application forms, please call the FCC Hotline at 1) For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction
800-418-FORM. Request form #159 and form #605. Questions regarding the license or carbon of a sales receipt. If you send the original receipt, it cannot be returned; 2) Send the entire
application should be directed to the FCC at 888-CALL-FCC. Additional information product; 3) Enclose a description of what is happening with the radio. Include a typed or clearly
is available on the FCCs website at www.fcc.gov. printed name and address of where the radio is to be returned; 4) Pack radio securely to prevent
damage in transit. If possible, use the original packing material; 5) Ship prepaid and insured by way
Safety Information for microTALK Radios
of a traceable carrier such as United Parcel Service (UPS) or First Class Mail to avoid loss in transit
Your wireless handheld portable transceiver contains a low power transmitter. When the Talk to Cobra Factory Service, Cobra Electronics Corporation, 6500 West Cortland Street, Chicago,
button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate Illinois 60707 USA; 6) If the radio is in warranty, upon receipt of your radio it will either be
at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions repaired or exchanged depending on the model. Please allow approximately 3 4 weeks before
(FCC) adopted RF exposure guidelines with safety levels for handheld wireless devices. contacting Cobra for status. If the radio is out of warranty, a letter will automatically be sent
Important: informing you of the repair charge or replacement charge. If you have any questions, please call
FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets 773-889-3087 for assistance.
the FCC RF exposure guidelines when used with Cobra accessories supplied or designated for
this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could
damage the transmitter and may violate FCC regulations. Warranty
Normal Position:
Hold the transmitter approximately 2 inches from your face and speak in a normal voice,
with the antenna pointed up and away. Limited 1-Year Warranty For Products Purchased in the U.S.A.
Cobra Electronics Corporation warrants that its Cobra GMRS Radios, and the component parts
thereof, will be free of defects in workmanship and materials for a period of one (1) year from the
date of first consumer purchase. This warranty may be enforced by the first consumer purchaser,
This device complies with part 15 of the FCC Rules. Operation is subject to provided that the product is utilized within the U.S.A. Cobra will, without charge, repair or replace,
the following two conditions: (1) This device may not cause harmful interference, at its option, defective GMRS radios, products or component parts upon delivery to the Cobra
and (2) this device must accept any interference received, including interference Factory Service department, accompanied by proof of the date of first consumer purchase, such
that may cause undesired operation. as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship
the product for warranty service, but the return charges will be at Cobras expense, if the product
FCC Warnings: Replacement or substitution of transistors, regular diodes or
is repaired or replaced under warranty. This warranty gives you specific legal rights, and you may
other parts of a unique nature, with parts other than those recommended by
also have other rights which may vary from state to state.
Cobra may cause a violation of the technical regulations of part 95 of the FCC
Rules, or violation of type acceptance requirements of part 2 of the Rules. Exclusions: This limited warranty does not apply: 1) To any product damaged by accident;
2) In the event of misuse or abuse of the product or as a result of unauthorized alterations or
repairs; 3) If the serial number has been altered, defaced, or removed; 4) If the owner of the
product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness for a particular purpose
are limited in duration to the length of this warranty. Cobra shall not be liable for any incidental,
consequential or other damages; including, without limitation, damages resulting from loss of
use or cost of installation. Some states do not allow limitations on how long an implied warranty
lasts and/or do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitations may not apply to you.
For products purchased outside the U.S.A., please contact your local dealer for
warranty information.
Name
Telephone
Customer Signature
U.S. Subtotal
Amount Shipping/Handling* Tax Table (Tax if Applicable)
$10.00 or less . . . . . $3.00 Ohio, Wisconsin add 5%
Shipping/Handling
$10.01-$25.00 . . . . . $5.50 Indiana, Michigan add 6%
$25.01-$50.00 . . . . . $7.50 Illinois add 8.75% Total
$50.01-$90.00 . . . . $10.50
$90.01-$130.00 . . . $13.50 *For AK, HI and PR add additional $26.95 for FedEx Next Day or
$130.01-$200.00 . . $16.50 $10.95 for FedEx 2nd Day. Excludes weekends and holidays shipments.
$200.01 plus . . . . . 10% of Please allow 2-3 weeks for delivery in the U.S. Prices subject to
purchase change without notice.
The Cobra Optional Accessories
line of quality You can find accessories at your local Cobra dealer,
products includes:
or in the U.S.A. you can order directly from Cobra.
CB Radios
Ordering From U.S.
microTALK Radios
Call 773-889-3087 for pricing or visit www.cobra.com.
Radar/Laser Detectors
For credit card orders, complete and return this order
Safety Alert Traffic
form to fax number 773-622-2269. Or call 773-889-3087
Warning Systems
(Press 1 from the main menu) 8:00 a.m. to 6:00 p.m. CT,
Accessories Monday through Friday.
GPS (Global Make check or money order payable to:
Positioning System)
Cobra Electronics, Attn: Accessories Dept.
HighGear Accessories 6500 West Cortland Street, Chicago, IL 60707 USA
To order online, please visit our website: www.cobra.com
28 English
Manual del propietario
RADIO
BIDIRECCIONAL
MODELO
Ayuda a clientes
Conector
para la correa
Compartimiento de
las bateras
Botn de bloqueo
de teclas
Botn de
transmisin
Botn de brjula
Botones de
cambio de canal
Pantalla de
cristal lquido
iluminada
Botn de
potencia alta,
mediana y baja
Entrada
para
cargador
Botn de
Botn de llamada
iluminacin
y alcance Botn de
mximo modalidad
Altoparlante y
micrfono
3 Espaol
Introduccin
Caractersticas del producto Introduccin Operacin Ayuda a clientes Garanta
Encendido y apagado Encendido del radio microTALK Botn de modalidad Desplazamiento por la funcin
Para encender el radio: de modalidad
1. Girar la perilla de encendido, apagado y Al desplazarse por las opciones de la funcin de
volumen para encender el radio y ajustar modalidad, podr seleccionar o activar las funciones
el volumen. Una serie de seales sonoras que prefiere del radio microTALK. Al desplazarse por
indicar que el radio est encendido. las opciones de la funcin de modalidad, las funciones
del radio se presentan en el orden predeterminado:
El radio microTALK est ahora en la modalidad de
espera, listo para recibir transmisiones. El radio Ajustar cdigos de comunicacin privada
siempre est en la modalidad de espera, excepto al Ajustar canal de radio de avisos de peligro
oprimir el botn de transmisin, llamada o modalidad. de la NOAA
Bateras con carga
Ajustar avisos de peligro de la NOAA
baja Bateras con carga baja Ajustar cronmetro
El radio microTALK tiene un indicador de nivel de Ajustar reloj
carga de la batera que seala cundo la carga de Ajustar alarma
las bateras est disminuyendo. Cuanto mayor es Encender o apagar modalidad VOX
el nmero de barras ascendentes, ms fuerte es el Ajustar nivel de sensibilidad de la modalidad VOX
nivel de carga de la batera. Cuando el nivel de carga Ajustar localidad de memoria
de las bateras es bajo, comienzan a parpadear la
Ajustar rastreo de canales
ltima barra para indicar que es necesario cambiar
las bateras o cargarlas, si son bateras recargables. Ajustar rastreo de cdigos de comunicacin privada
Ajustar rastreo de memoria
Modalidad de ahorro
Ahorro automtico de Ajustar aviso vibratorio VibrAlert
de bateras carga de las bateras y/o aviso de llamada
Ajustar avisos de llamada
El radio microTALK tiene un circuito especial diseado
para prolongar la vida til de las bateras. Si no hay Encender o apagar aviso de cambio
transmisiones en un perodo de diez segundos, la Encender o apagar sonidos de teclas
unidad cambia automticamente a la modalidad de Botn de cambio
ahorro de carga de las bateras y aparece el mensaje de canal Canales
Power Saver en la pantalla. Esto no afecta la Para seleccionar un canal:
capacidad de la unidad para recibir transmisiones.
1. Con el radio encendido, seleccione cualquiera
Botn de transmisin Comunicacin con otras personas de los 22 canales oprimiendo los botones de
cambio de canal.
Para hablar con otra persona: Nmero de canal
Botn de bloqueo Oprima el botn de bloqueo para restablecer la Botn de modalidad Alarma
pantalla a OO:oo:oo.
Usted puede utilizar la funcin de reloj del radio
En la modalidad de cronmetro, el radio microTALK microTALK como alarma.
le avisar de la recepcin de llamadas, pero en
la pantalla seguir mostrndose el cronmetro. Para activar la alarma del radio microTALK:
Tambin puede transmitir normalmente con el Icono de alarma
1. Oprima el botn de modalidad hasta que comience
botn de transmisin o en la modalidad VOX. a parpadear el icono de alarma y se presente el
Al hacerlo, la pantalla regresar automticamente estado actual de la funcin [encendido (ON) o
a la presentacin normal. Cuando termine de apagado (OFF)].
transmitir, el radio regresar en forma automtica 2. Oprima los botones de cambio de canal para
a la modalidad de cronmetro. encender o apagar la alarma.
La funcin de brjula no puede utilizarse Botn de modalidad Para ajustar la alarma:
en la modalidad de cronmetro. 1. Oprima el botn de modalidad hasta que comience
a parpadear el icono de alarma y se presente el
estado actual de la funcin [encendido (ON) o
Botn de modalidad Reloj apagado (OFF)].
El radio microTALK muestra la hora actual Icono de alarma 2. Oprima el botn de bloqueo. Comenzar a
y la indicacin a.m. o p.m. correspondiente. parpadear la hora.
Para activar la modalidad de reloj: 3. Oprima los botones de cambio de canal para ajustar
1. Oprima el botn de modalidad hasta que la hora.
Modalidad de reloj
aparezca el reloj. 4. Repita los pasos 2 y 3 para ajustar los minutos y
2. Oprima el botn de modalidad para salir de la Botn de bloqueo a.m. o p.m.
modalidad de reloj y pasar a otras funciones. 5. a. Despus de ajustar a.m. o p.m., oprima el botn
Para ajustar el reloj: de bloqueo para registrar la hora de la alarma,
activar la alarma y regresar a la modalidad de
Botn de bloqueo 1. En la modalidad de reloj, oprima el botn espera.
de bloqueo. La hora comenzar a parpadear
en la pantalla. Ajuste de hora de b. Oprima el botn de modalidad para registrar la
la alarma hora de la alarma, activar la alarma y pasar a
2. Oprima los botones de cambio de canal otras funciones.
para ajustar la hora.
c. Oprima el botn de transmisin para registrar la
Ajustar reloj 3. Repita los pasos 1 y 2 para ajustar los minutos hora de la alarma, activar la alarma y regresar a
y a.m. o p.m. la modalidad de espera.
4. Oprima el botn de modalidad para salir Botn de cambio
de canal
de la modalidad de ajuste del reloj y pasar
a otras funciones.
En la modalidad de reloj, el radio microTALK
le avisar de la recepcin de llamadas, pero en la
pantalla seguir mostrndose el reloj. Tambin puede
transmitir normalmente con el botn de transmisin o
en la modalidad VOX. Al hacerlo, la pantalla regresar
automticamente a la presentacin normal. Cuando
termine de transmitir, el radio regresar en forma
automtica a la modalidad de reloj.
La funcin de brjula no puede utilizarse
en la modalidad de reloj.
12 Espaol Nada se compara a Cobra 13
Operacin
Uso del radio Introduccin Operacin Ayuda a clientes Garanta
Botn de modalidad Para leer un canal almacenado en una localidad Si oprime el botn de transmisin durante el rastreo,
de memoria: cuando no est en el lapso de diez segundos de
1. Oprima el botn de modalidad hasta que el icono de recepcin de transmisin, transmitir en el ltimo
la memoria y la localidad de memoria de canales canal en el que recibi o transmiti.
(1 a 10) comiencen a parpadear en la pantalla. Si no oprime ningn botn en un lapso de diez
Icono de memoria 2. Oprima los botones de cambio de canal para segundos, el radio reanudar automticamente
seleccionar una localidad de memoria de canales. el rastreo de los canales principales.
3. a. Oprima el botn de transmisin para transmitir Botn de cambio Para rastrear los cdigos de comunicacin privada:
en el canal seleccionado en la memoria y de canal 1. En la modalidad de espera, oprima los botones
regresar a la modalidad de espera en ese de cambio de canal para seleccionar el canal
Botn de cambio canal de la memoria. principal que quiere rastrear.
de canal
b. Oprima el botn de modalidad para salir de la 2. Oprima el botn de modalidad hasta que
modalidad de memoria sin cambiar el valor de aparezca el icono de rastreo y comience a
canal de memoria y continuar con otras funciones. Seleccin del canal parpadear en la pantalla el nmero del cdigo
de comunicacin privada.
Rastreo 3. Oprima uno de los botones de cambio de
El radio microTALK puede rastrear automticamente canal para que la unidad comience a rastrear
los canales principales (1 a 22), los cdigos de los cdigos de comunicacin privada del canal
comunicacin privada (00 a 38) de un canal principal, Botn de modalidad principal seleccionado.
o las localidades de memoria. 4. El icono de rastreo seguir apareciendo en pantalla
Para rastrear los canales principales: mientras la funcin de rastreo est activa. El radio
Botn de modalidad
1. Oprima el botn de modalidad hasta que aparezca rastrear todos los cdigos de comunicacin privada
el icono de rastreo y comience a parpadear en la hasta que detecte la recepcin de una transmisin.
pantalla el nmero del canal principal. Rastreo de cdigos de
La unidad permanecer en ese canal y cdigo de
comunicacin privada comunicacin privada durante diez segundos.
2. Oprima los botones de cambio de canal para
Durante este lapso, usted puede hacer lo siguiente:
comenzar a rastrear los canales principales.
Rastreo de canales a. Mantenga oprimido el botn de transmisin
La unidad omite los cdigos de para comunicarse con otras personas.
comunicacin privada al rastrear El radio permanecer en ese canal y cdigo
los canales principales. de comunicacin privada y luego regresar
a la modalidad de espera.
Botn de cambio 3. El icono de rastreo seguir apareciendo en pantalla b. Oprima los botones de cambio de canal
de canal mientras la funcin de rastreo est activa. El radio para reanudar el rastreo de cdigos de
rastrear todos los canales principales hasta que comunicacin privada.
detecte la recepcin de una transmisin. La unidad
permanecer en ese canal durante diez segundos. c. Oprima el botn de modalidad para pasar
Durante este lapso, usted puede hacer lo siguiente: al rastreo de la memoria (consulte los detalles
en la pgina 18).
a. Mantenga oprimido el botn de transmisin
para comunicarse con otras personas. El radio Si oprime el botn de transmisin durante el rastreo,
permanecer en ese canal y regresar a la cuando no est en el lapso de diez segundos de
modalidad de espera. recepcin de transmisin, transmitir en el ltimo
canal en el que recibi o transmiti.
b. Oprima los botones de cambio de canal para
reanudar el rastreo de canales. Si no oprime ningn botn en un lapso de diez
segundos, el radio reanudar automticamente el
c. Oprima el botn de modalidad para pasar al rastreo de los cdigos de comunicacin privada.
rastreo de los cdigos de comunicacin privada
(consulte los detalles en la pgina 17).
16 Espaol Nada se compara a Cobra 17
Operacin
Uso del radio Introduccin Operacin Ayuda a clientes Garanta
Botn de modalidad Para rastrear las localidades de memoria: Botn de modalidad Aviso vibratorio VibrAlert y
1. Oprima el botn de modalidad hasta que el seales de llamada
icono de rastreo, el icono de memoria y el
El radio microTALK puede avisarle de la recepcin
nmero de localidad de memoria comiencen de una seal mediante un aviso sonoro de llamada,
a parpadear en la pantalla. un aviso vibratorio silencioso o una combinacin de
Rastreo de la memoria 2. Oprima los botones de cambio de canal para VibrAlert + timbrado ambos avisos.
que el radio comience a rastrear las localidades
Para cambiar los avisos de llamada:
de memoria.
1. Oprima el botn de modalidad hasta que el icono de
3. El icono de rastreo seguir apareciendo en pantalla
ajuste de aviso de llamada comience a parpadear en
mientras la funcin de rastreo est activa. El radio
la pantalla. Se presenta el valor actual (vibracin +
rastrear todas las localidades de memoria hasta Slo VibrAlert
Botn de cambio de timbre, slo vibracin o slo timbre).
canal que detecte la recepcin de una transmisin.
La unidad permanecer en esa localidad de 2. Oprima los botones de cambio de canal para
memoria durante diez segundos. Durante este cambiar este valor del aviso de llamada.
lapso, usted puede hacer lo siguiente: 3. a. Oprima el botn de modalidad para registrar el
a. Mantenga oprimido el botn de transmisin Slo timbrado nuevo valor y continuar con otras funciones.
para comunicarse con otras personas. El radio b. Oprima el botn de bloqueo para registrar el
permanecer en esa localidad de memoria y nuevo valor y regresar a la modalidad de espera.
regresar a la modalidad de espera.
b. Oprima los botones de cambio de canal para Diez seales de aviso de llamada
reanudar el rastreo de localidades de memoria. Botn de cambio Usted puede elegir diez seales para transmitir un
de canal
c. Oprima el botn de modalidad para pasar a la aviso de llamada exclusivo.
siguiente funcin de modalidad. Para cambiar el aviso de llamada:
Si oprime el botn de transmisin durante el rastreo, 1. Oprima el botn de modalidad hasta que la letra C
cuando no est en el lapso de diez segundos de y el nmero de aviso de llamada vigente (1 a 10)
recepcin de transmisin, transmitir en el ltimo aparezcan en la pantalla. La seal vigente de aviso
Botn de modalidad
canal en el que recibi o transmiti. de llamada sonar durante un segundo.
Si no oprime ningn botn en un lapso de diez 2. Oprima los botones de cambio de canal para or
segundos, el radio reanudar automticamente otras seales de aviso de llamada.
el rastreo de las localidades de memoria. 3. a. Oprima el botn de modalidad para registrar el
Si quiere reducir el nmero de localidades Valor de aviso de nuevo valor y continuar con otras funciones.
llamada b. Oprima el botn de bloqueo para registrar el
de memoria que se rastrean, es necesario
desprogramar las localidades que no quiere nuevo valor y regresar a la modalidad de espera.
rastrear, cambiando a 00 el canal principal y
el cdigo de comunicacin privada. Consulte
los detalles en la pgina 15.
Botn de cambio
de canal
Para rastrear las localidades de memoria,
es necesario que tenga al menos dos
localidades de memoria programadas.
Nominal
Unidad
11 km (7 millas). El alcance variar dependiendo A. FRS/GMRS B. Receptor
del terreno y las condiciones. Frecuencia
El radio funcionar con el alcance mximo en Asignacin y 1. Sensibilidad
zonas planas y despejadas. compatibilidad Con 12 dB seal ms ruido
y distorsin (SINAD) . . . . . . . .dBm -121
Alcance reducido
La presencia de edificios y follaje en la trayectoria Con deteccin de seal
de la seal puede reducir el alcance del radio. Importante: Tenga presente que los de llamada . . . . . . . . . . . . . . . .dBm -121
modelos Cobra GMRS con 15 canales
El follaje denso y el terreno montaoso reducirn pueden utilizar nmeros de canal diferentes 2. Salida sonora mxima con 10% de distor-
el alcance del radio. sin armnica total (THD) . . . . . . mW 200
para la misma frecuencia. Por ejemplo,
un modelo Cobra GMRS de 15 canales 3. Relacin mxima seal-ruido con entrada
En los canales FRS 8 a 14, el radio cambia de radiofrecuencia de 1 mV . . . .dB 50
tendra que sintonizarse al canal 11 para
automticamente a potencia baja, lo que limitar comunicarse con un modelo GMRS de 4. Reduccin de ruido de fondo
el alcance de comunicacin del radio. 22 canales sintonizado en el canal 15. a) Sensibilidad . . . . . . . . . . . . .dBm -121
Consulte la siguiente tabla para conocer b) Tiempo de ataque . . . . . . . . .ms 150
Alcance reducido
Recuerde que puede obtener el mayor la compatibilidad de canales y frecuencias. c) Tiempo de cierre . . . . . . . . . .ms 200
alcance con el extensor de alcance mximo. 5. Respuesta de frecuencia sonora
A = Nmero de canal para los modelos @ 300 Hz . . . . . . . . . . . . . . . . .dB -3
Consulte los detalles en la pgina 22. GMRS de 22 canales @ 2500 Hz . . . . . . . . . . . . . . . . dB -10
B = Nmero de canal para los modelos
6. Ancho de banda de desplazamiento
GMRS de 15 canales de seal . . . . . . . . . . . . . . . . . . kHz 5
C = Tipo de servicio de radio
7. Rechazo de canal adyacente . . .dB 60
D = Frecuencia (MHz)
E = Potencia (vatios) 8. Rechazo de intermodulacin . . .dB 65
a = 3,0/2,0/0,5 (puede seleccionarse) 9. Rechazo de respuesta espuria . .dB 55
b = 0,5
Nominal
Unidad
A B C D E
C. Transmisor
1 1 FRS/GMRS 462,5625 a
1. Potencia
2 2 FRS/GMRS 462,5875 a GMRS . . . . . . . . . . . . . . . . . . . . .W 3
3 3 FRS/GMRS 462,6125 a Slo FRS . . . . . . . . . . . . . . . . .mW 500
4 4 FRS/GMRS 462,6375 a 2. Estabilidad de frecuencia
5 5 FRS/GMRS 462,6625 a portadora . . . . . . . . . . . . . . . . .Hz 500
6 6 FRS/GMRS 462,6875 a 3. Limitacin de modulacin . . . . kHz 2,5
7 7 FRS/GMRS 462,7125 a 4. Tiempo de ataque de portadora . . . ms 80
8 FRS 467,5625 b 5. Respuesta de frecuencia sonora
9 FRS 467,5875 b @ 300 Hz . . . . . . . . . . . . . . . . . .dB -12
10 FRS 467,6125 b @ 2500 Hz . . . . . . . . . . . . . . . . .dB +6
11 FRS 467,6375 b 6. Distorsin sonora . . . . . . . . . . . % 3
12 FRS 467,6625 b 7. Ruido de zumbido . . . . . . . . . . .dB 30
13 FRS 467,6875 b 8. Comportamiento de frecuencia transitoria
14 FRS 467,7125 b a) Transmisin encendida . . . . .ms 30
15 11 GMRS 462,5500 a b) Transmisin apagada . . . . . .ms 5
16 8 GMRS 462,5750 a
Nominal
D. Fuente
Unidad
17 12 GMRS 462,6000 a
18 9 GMRS 462,6250 a de poder
19 13 GMRS 462,6500 a
20 10 GMRS 462,6750 a 1. Vida de las bateras (relacin 5:5:90)
21 14 GMRS 462,7000 a Con bateras alcalinas . . . . . . .Horas 24
22 15 GMRS 462,7250 a 2. Intervalo operativo
de las bateras . . . . . . . . . . . . . . V 4,2 - 6,0
AVISO IMPORTANTE: REQUISITO DE LICENCIA DE LA FCC Si tiene preguntas sobre la operacin o instalacin de su nuevo
Este radio bidireccional funciona en frecuencias GMRS (Servicio General de Radio Mvil) que requieren producto Cobra, o si le faltan piezas, por favor llame primero
una licencia de la Comisin Federal de Comunicaciones (FCC) de Estados Unidos. El usuario debe tener
a Cobra. NO DEVUELVA ESTE PRODUCTO A LA TIENDA!
licencia antes de utilizar el radio en los canales 1 a 7 o 15 a 22, que son los canales GMRS de este
radio. El uso sin licencia de los canales GMRS, en infraccin de las reglas de la FCC rules, tal como Consulte la informacin sobre servicio al cliente en la pgina 2.
se estipula en las secciones 501 y 502 (y sus enmiendas) de la Ley de Comunicaciones, puede estar
sujeto a multas cuantiosas.
Preguntas sobre el servicio del producto
Si el producto requiere servicio de fbrica, llame a Cobra antes de enviar el radio. De esta manera
La FCC designar una seal de llamada para los usuarios con licencia, que debern utilizar esta seal
asegurar el tiempo de respuesta ms rpido en la reparacin. Se le puede solicitar que enve el
como identificacin de estacin al utilizar el radio. Los usuarios de GMRS tambin deben cooperar, radio a la fbrica Cobra. Para el servicio y la devolucin del producto, ser necesario que
participando nicamente en transmisiones permitidas, evitando la interferencia de canales de otros proporcione lo siguiente.
usuarios de GMRS y siendo prudentes con la duracin del tiempo de transmisin.
1) Para reparaciones cubiertas por la garanta, incluya un comprobante de compra, como sera
Para obtener informacin sobre licencias y formularios de solicitud, llame a la lnea telefnica una fotocopia o una copia al carbn del recibo de compra. No enve el recibo original, pues no
de informacin de la FCC al 800-418-FORM. Solicite los formularios 159 y 605. Las preguntas podr devolvrsele. 2) Enve todo el producto. 3) Incluya una descripcin del problema que tiene el
relacionadas con la solicitud de licencias deben dirigirse a la FCC, al 888-CALL-FCC. Tambin se radio. Incluya el nombre y la direccin, escritos claramente a mquina o con letra de molde, para la
ofrece informacin adicional en el sitio de la FCC en Internet: www.fcc.gov. devolucin del radio. 4) Embale el radio de manera segura para evitar daos durante el transporte.
De ser posible, utilice el material de embalaje original. 5) Enve el radio con flete pagado y asegurado,
Informacin de seguridad de los radios microTALK utilizando un servicio de mensajera como United Parcel Service (UPS) o correo de primera clase con
El transmisor-receptor inalmbrico porttil contiene un transmisor de baja potencia. Al oprimir el rastreo de envos, para evitar que el radio se pierda, a Cobra Factory Service, Cobra Electronics
botn de transmisin, enva seales de radiofrecuencia (RF). Este dispositivo est autorizado para Corporation, 6500 West Cortland Street, Chicago, Illinois 60707 USA. 6) Si el radio est bajo garanta,
operar con un factor de trabajo que no exceda el 50 por ciento. En agosto de 1996, la Comisin la unidad ser reparada o reemplazada, dependiendo del modelo. Por favor, deje pasar de tres a
Federal de Comunicaciones de EE.UU. (FCC) adopt las pautas de exposicin a radiofrecuencia, cuatro semanas antes de comunicarse con Cobra para conocer el estado del radio. Si el radio
con niveles de seguridad para todos los dispositivos inalmbricos porttiles. est fuera del perodo de garanta, se le enviar una carta informndole del cargo de reparacin
o reemplazo. Si tiene preguntas al respecto, llame al 773-889-3087 para obtener ayuda.
Importante:
Requisitos de la FCC sobre exposicin a radiofrecuencia: Este producto ha sido probado y
cumple las pautas de exposicin a radiofrecuencia de la FCC para uso corporal, siempre y cuando
se utilice con los accesorios Cobra provistos con el producto o diseados para l. El uso de otros Garanta
accesorios tal vez no asegure el cumplimiento de las pautas de exposicin a radiofrecuencia de la
FCC. Use nicamente la antena provista. Las antenas, modificaciones y accesorios no autorizados
pueden daar el transmisor e infringir los reglamentos de la FCC. Garanta limitada de un ao para productos comprados en EE.UU.
Posicin normal: Cobra Electronics Corporation garantiza que sus radios Cobra GMRS, as como las piezas
Sostenga el transmisor a una distancia aproximada de 5 cm (2 pulgadas) de la boca y hable componentes de los mismos, estarn libres de defectos de mano de obra y materiales durante un
normalmente, con la antena apuntando hacia arriba y lejos de usted. perodo de un ao a partir de la fecha de compra por parte del primer consumidor. Esta garanta
podr ser ejercida por el primer comprador consumidor, siempre y cuando el producto se haya
adquirido en los EE.UU. Cobra reparar o reemplazar, sin cargo y a su discrecin, los radios
GMRS, productos y componentes, previa entrega de los mismos al Departamento de Servicio
Este dispositivo cumple los requisitos de la parte 15 de las reglas de la FCC.
de Fbrica Cobra acompaados por un comprobante de la fecha de compra por parte del primer
La operacin del dispositivo est sujeta a las dos condiciones siguientes: consumidor, como sera una copia del recibo de compra. Usted deber pagar los cargos de flete
(1) Este dispositivo no provocar interferencia daina, y (2) este dispositivo iniciales relacionados con el envo del producto para el servicio por garanta, pero Cobra cubrir
debe aceptar la interferencia que reciba, incluso la interferencia que puede los cargos de devolucin del producto si ste es reparado o reemplazado de conformidad con
ocasionar un funcionamiento indeseable. la garanta. Esta garanta le concede derechos legales especficos y usted tambin puede tener
Advertencias de la FCC: El reemplazo o sustitucin de transistores, diodos otros derechos, los cuales pueden variar de un estado a otro.
normales u otras piezas nicas con piezas que no sean las recomendadas Exclusiones: Esta garanta limitada tendr validez en los siguientes casos: 1) productos
por Cobra puede infringir los reglamentos tcnicos de la parte 95 de las daados por accidentes; 2) abuso o uso indebido del producto o como consecuencia de
reglas de la FCC o infringir los requisitos de aceptacin de tipo de la parte alteraciones o reparaciones no autorizadas; 3) si el nmero de serie ha sido alterado,
daado o eliminado; 4) si el propietario del producto reside fuera de Estados Unidos.
2 de las reglas de la FCC.
Todas las garantas implcitas, incluso las garantas de comerciabilidad e idoneidad para un fin
especfico, estn limitadas a la vigencia de esta garanta. Cobra no ser responsable por daos
incidentes, consecuentes o de otro tipo, como son, sin limitacin alguna, los daos provocados
por la prdida de uso o el costo de instalacin. Algunos estados no permiten limitaciones a la
duracin de una garanta implcita o no permiten la exclusin o limitacin de los daos incidentes
y consecuentes, por lo cual las limitaciones previamente especificadas tal vez no se apliquen en
su caso.
En el caso de productos comprados fuera de EE.UU., comunquese con un distribuidor
de productos Cobra de su localidad para obtener informacin sobre la garanta.
Nombre
Telfono
Subtotal en EE.UU.
Importe Manejo y envo* Tabla de impuestos (Impuesto,
$10,00 o menos . . . . $3,00 Ohio y Wisconsin, agregue el 5% de ser aplicable)
$10,01-$25,00 . . . . . $5,50 Indiana y Michigan, agregue el 6% Manejo y envo
$25,01-$50,00 . . . . . $7,50 Illinois, agregue el 8,75%
$50,01-$90,00 . . . . $10,50
Total
$90,01-$130,00 . . . $13,50 *Para envos a Alaska, Hawaii y Puerto Rico, agregue $26,95 para envos
$130,01-$200,00 . . $16,50 por FedEx para el da siguiente o $10,95 para envos por FedEx para el
$200,01 o ms . . . 10% de da subsiguiente. Excluye los fines de semana y das festivos.
la compra Plazo de entrega dentro de los EE.UU. ser entre 2 y 3 semanas.
Los precios estn sujetos a cambios sin aviso previo.
La lnea de Accesorios optativos
productos de Encontrar accesorios de alta calidad con los distribuidores
calidad Cobra
Cobra de su localidad. En Estados Unidos, tambin puede
tambin incluye:
colocar su pedido directamente con Cobra.
Radios de banda
ciudadana (CB) Pedidos en los EE.UU.
Radios microTALK Llame al 773-889-3087 para conocer los precios o visite
Detectores de www.cobra.com.
radar y lser Para pedidos con tarjeta de crdito,
Sistemas de llene este formulario de pedidos y envelo por fax al
advertencia de 773-622-2269. Tambin puede llamar al 773-889-3087
trfico Safety Alert (marque 1 en el men principal) de 8:00 a.m. a 6:00 p.m.,
Sistemas mundiales hora del centro de EE.UU., de lunes a viernes.
de determinacin de
posicin (GPS) Elabore el cheque o giro monetario a la orden de:
Cobra Electronics, Attn: Accessories Dept.
Accesorios HighGear 6500 West Cortland Street, Chicago, IL 60707 USA
Para efectuar pedidos va Internet,
28 Espaol
visite nuestro sitio en www.cobra.com