The table provides the available critical stress values for compression members made of steel with various yield strengths. The critical stress values are given in ksi for both Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD) methods. The values depend on the member length factor (KL/r) and steel yield strength, which ranges from 35 to 50 ksi. Higher yield strengths and shorter member lengths result in higher available critical stresses.
The table provides the available critical stress values for compression members made of steel with various yield strengths. The critical stress values are given in ksi for both Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD) methods. The values depend on the member length factor (KL/r) and steel yield strength, which ranges from 35 to 50 ksi. Higher yield strengths and shorter member lengths result in higher available critical stresses.
The table provides the available critical stress values for compression members made of steel with various yield strengths. The critical stress values are given in ksi for both Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD) methods. The values depend on the member length factor (KL/r) and steel yield strength, which ranges from 35 to 50 ksi. Higher yield strengths and shorter member lengths result in higher available critical stresses.