Professional Documents
Culture Documents
Head Description
Interfaces
TX
TX RF PA filter Bias-T VSWR
Tx/Rx
Det
RX
RX RF filter
LNA
RX OUT
RF Loop
Optical IF
TX
TX RF PA filter VSWR
Tx/Rx
Det
RX
Optical IF RF RX RF filter
control LNA
TX
TX RF PA filter Bias-T VSWR
Tx/Rx
Optical IF Det
RX
RX RF filter
LNA
RX OUT
TX
TX RF PA filter VSWR
Tx/Rx
Det
RX
RX RF filter
LNA
DC IN
PSU
Electrical specifications
Power consumption
IP rating IP65
Related optional items Flexi Pole Mounting Kit (FPKA/C)
width
Volume 27 l
depth
Environmental specifications
LEDs
w NOTICE: The RRH should always be mounted in a vertical orientation with connectors
on the bottom side to ensure proper cooling.
g Note: The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond
extended limits, unit might shut down.
w NOTICE: The RRH should always be mounted in a vertical orientation with connectors
on the bottom side to ensure proper cooling.
g Note: The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond
extended limits, unit might shut down.
MIMO 4TX
Outdoor installation Yes
SW supported technology FDD-LTE
TX frequency range 2620-2690 MHz
RX frequency range 2500-2570 MHz
DL instantaneous bandwidth 65 MHz
UL instantaneous bandwidth 65 MHz
DL filter bandwidth 70 MHz
UL filter bandwidth 70 MHz
Interfaces
GND
TX
TX RF PA filter Bias-T VSWR
Tx/Rx
Det ANT 1
RX
RX RF filter
LNA
RX MON
TX
TX RF PA filter VSWR
Optical IF Tx/Rx
Det ANT 2
RX
RX RF filter
LNA
Optical IF RF RX MON
control
TX
TX RF PA filter Bias-T VSWR
Tx/Rx
Optical IF Det ANT 3
RX
RX RF filter
LNA
RX MON
TX
TX RF PA filter VSWR
Tx/Rx
Det ANT 4
RX
RX RF filter
LNA
RX MON
DC IN
PSU
Electrical specifications
Power consumption
IP rating IP65
Related optional items Flexi Pole Mounting Kit (FPKA/C)
Flexi Power AC/DC Submodule 230V
(FPAE)
Flexi 4.0 Large Book Mount Kit (FMFB)
width
Width Core RRH: 320 mm (12.6 in)
With plastic cover and depth
mounting brackets: 331 mm
(13.0 in)
With FMFB and strain relief
With FMFB: 434 mm (17.1 in)
Environmental specifications
LEDs
w NOTICE: The RRH should always be mounted in a vertical orientation with connectors
on the bottom side to ensure proper cooling.
g Note: The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond
extended limits, unit might shut down.