Size Range:12" through 36" Material:Carbon steel U-bolt and four finished hex nuts Finish:q Plain or q Fig. 137: Zinc Plated (Hot-Dip Galvanized optional) or q Fig. 137S: Hot-Dip Galvanized Service:Recommended for support, or guide of heavy loads; often employed in power, process plant and marine service. Approvals:Complies with Federal Specification A-A-1192A (Type 24), WW-H-171-E (Type 24), ANSI/MSS SP-69 and MSS SP-58 (Type 24). Ordering Fig. 137:Specify pipe size x rod size (e.g., 6 x 58), figure number, name. U-bolt will be furnished with longer tangents D or with longer threads E if so required and ordered. If hex nuts are not required, specify without hex nuts. Ordering Fig. 137S:Specify figure number, name, material specification, dimensions A, B, C, D, and E, and with hex nuts or without hex nuts. Note:The acceptability of galvanized coatings at temperatures above 450F is at the discretion of the end user.
FIG. 137: LOADS (LBS) WEIGHTS (LBS) DIMENSIONS (IN) n
C
Rod Max Normal 650 F
B A Pipe Load Size Max Side Wt. B C D E F Size A 650 F 750 F Load F 1 15 2 0.11 16 1316 2516 E 3 1 4 4 580 454 145 0.12 118 138 234 1 2732 D 2 8 1 0.12 138 158 2332 114 0.28 11116 2116 278 2132 CL 112 3 8 1,460 1,144 365 0.30 2 238 3 212 2116 2 0.33 2716 21316 314 212 0.73 21516 3716 334 2516 3 0.78 3916 4116 4 312 1 2 2,700 2,114 675 0.84 4116 4916 414 3 214 4 0.90 4916 5116 412 5 1.0 558 618 5 2732 *When the combination of a normal load and 6 5 2.0 634 738 618 a side load occurs, a straight line interaction 8 4,320 3,382 1,080 312 21316 8 2.3 834 938 718 formula may be used to determine if the Fig. 137 3 10 4 6,460 5,060 1,615 4.9 1078 1158 838 3 is still within the allowable stress range: 4 12 7.7 1278 1334 958 Pn/Pna + Ps/Psa 1 7 14 8 8,960 7,016 2,490 8.3 1418 15 1014 314 Where: 414 16 9.2 1618 17 1114 Pn = actual applied normal load; 18 13.5 1818 1918 1258 Pna = allowable normal load for the Fig. 137; 20 14.6 2018 2118 1358 Ps = actual applied side load; 24 1 11,800 9,240 16.9 2418 2518 1558 434 358 Psa = allowable side load for the Fig. 137 30 19.1 3018 3118 1858 Nuts must be snug tight in installation to 36 23.2 3618 3718 2158 achieve side loads shown. n Loads, weights and dimensions shown do not apply for Fig. 137S. Max load rating for carbon steel is based on 2 x load rating for rod. Max load rating for stainless steel is 0.85 times the maximum stated load ratings listed above.