Professional Documents
Culture Documents
lsp ]==============================
;;; Author: Copyright 2006,2007 Charles Alan Butler
;;; Contact @ www.TheSwamp.org
;;; Version: 1.3 April 9,2007
;;; Globalization by XANADU - www.xanadu.cz
;;; Purpose: Break All selected objects
;;; permitted objects are lines, lwplines, plines, splines,
;;; ellipse, circles & arcs
;;;
;;; Function c:BreakAll - Break all objects selected
;;; Function c:BreakwObjects - Break many objects with a single object
;;; Function c:BreakObject - Break a single object with many objects
;;; Function c:BreakWith - Break selected objects with other selected objects
;;; Function c:BreakTouching - Break objects touching the single Break object
;;; Function c:BreakSelected - Break selected objects with any objects that
touch it
;;;
;;; Sub_Routines:
;;; break_with
;;; ssget->vla-list
;;; list->3pair
;;; onlockedlayer
;;; get_interpts Return a list of intersect points
;;; break_obj Break entity at break points in list
;;; Requirements: objects must have the same z-value
;;; Restrictions: Does not Break objects on locked layers
;;; Returns: none
;;;=====================================================================
;;; THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT EXPRESS OR IMPLIED ;
;;; WARRANTY. ALL IMPLIED WARRANTIES OF FITNESS FOR ANY PARTICULAR ;
;;; PURPOSE AND OF MERCHANTABILITY ARE HEREBY DISCLAIMED. ;
;;; ;
;;; You are hereby granted permission to use, copy and modify this ;
;;; software without charge, provided you do so exclusively for ;
;;; your own use or for use by others in your organization in the ;
;;; performance of their normal duties, and provided further that ;
;;; the above copyright notice appears in all copies and both that ;
;;; copyright notice and the limited warranty and restricted rights ;
;;; notice below appear in all supporting documentation. ;
;;;=====================================================================
;;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
;; M A I N S U B R O U T I N E
;;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
(defun break_with (ss2brk ss2brkwith self / cmd intpts lst masterlist ss ssobjs
onlockedlayer ssget->vla-list list->3pair
get_interpts break_obj
)
;; ss2brk selection set to break
;; ss2brkwith selection set to use as break points
;; self when true will allow an object to break itself
;; note that plined will break at each vertex
(vl-load-com)
;;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
;; S U B F U N C T I O N S
;;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
;;==============================================================
;; return a list of intersect points
;;==============================================================
(defun get_interpts (obj1 obj2 / iplist)
(if (not (vl-catch-all-error-p
(setq iplist (vl-catch-all-apply
'vlax-safearray->list
(list
(vlax-variant-value
(vla-intersectwith obj1 obj2 acextendnone)
))))))
iplist
)
)
;;==============================================================
;; Break entity at break points in list
;;==============================================================
(defun break_obj (ent brkptlst / brkobjlst en enttype maxparam closedobj
minparam obj obj2break p1param p2 p2param
)
;; Handle any objects that can not be used with the Break Command
;; using one point, gap of 0.000001 is used
(cond
((and (= "SPLINE" enttype) ; only closed splines
(vlax-curve-isclosed obj2break))
(setq p1param (vlax-curve-getparamatpoint obj2break brkpt)
p2 (vlax-curve-getpointatparam obj2break (+ p1param 0.000001))
)
(command "._break" obj2break "_non" (trans brkpt 0 1) "_non" (trans p2 0 1))
)
((= "CIRCLE" enttype) ; break the circle
(setq p1param (vlax-curve-getparamatpoint obj2break brkpt)
p2 (vlax-curve-getpointatparam obj2break (+ p1param 0.000001))
)
(command "._break" obj2break "_non" (trans brkpt 0 1) "_non" (trans p2 0 1))
(setq enttype "ARC")
)
((and (= "ELLIPSE" enttype) ; only closed ellipse
(vlax-curve-isclosed obj2break))
;; Break the ellipse, code borrowed from Joe Burke 6/6/2005
(setq p1param (vlax-curve-getparamatpoint obj2break brkpt)
p2param (+ p1param 0.000001)
minparam (min p1param p2param)
maxparam (max p1param p2param)
obj (vlax-ename->vla-object obj2break)
)
(vlax-put obj 'startparameter maxparam)
(vlax-put obj 'endparameter (+ minparam (* pi 2)))
)
;;==================================
(t ; Objects that can be broken
(setq closedobj (vlax-curve-isclosed obj2break))
(command "._break" obj2break "_non" (trans brkpt 0 1) "_non" (trans brkpt 0
1))
(if (not closedobj) ; new object was created
(setq brkobjlst (cons (entlast) brkobjlst))
)
)
)
)
)
;;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
;; S T A R T H E R E
;;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
(if (and ss2brk ss2brkwith)
(progn
;; CREATE a list of entity & it's break points
(foreach obj (ssget->vla-list ss2brk) ; check each object in ss2brk
(if (not (onlockedlayer (vlax-vla-object->ename obj)))
(progn
(setq lst nil)
;; check for break pts with other objects in ss2brkwith
(foreach intobj (ssget->vla-list ss2brkwith)
(if (and (or self (not (equal obj intobj)))
(setq intpts (get_interpts obj intobj))
)
(setq lst (append (list->3pair intpts) lst)) ; entity w/ break
points
)
)
(if lst
(setq masterlist (cons (cons (vlax-vla-object->ename obj) lst)
masterlist))
)
)
)
)
;; masterlist = ((ent brkpts)(ent brkpts)...)
(if masterlist
(foreach obj2brk masterlist
(break_obj (car obj2brk) (cdr obj2brk))
)
)
)
)
;;==============================================================
)
(prompt "\nBreak Routines Loaded, Enter BreakAll, BreakEnt, or BreakWith to run.")
(princ)
;;==========================================
;; Break all objects selected
;;==========================================
(defun c:breakall (/ cmd ss)
;;==========================================
;; Break many objects with a single object
;;==========================================
(defun c:breakwobjects (/ cmd ss1 ss2)
(defun ssredraw (ss mode / i num)
(setq i -1)
(while (setq ename (ssname ss (setq i (1+ i))))
(redraw (ssname ss i) mode)
)
)
(command "._undo" "_begin")
(setq cmd (getvar "CMDECHO"))
(setvar "CMDECHO" 0)
;;==========================================
;; Break many objects with many object
;;==========================================
(defun c:BreakWith (/ cmd ss1 ss2)
(defun ssredraw (ss mode / i num)
(setq i -1)
(while (setq ename (ssname ss (setq i (1+ i))))
(redraw (ssname ss i) mode)
)
)
(command "._undo" "_begin")
(setq cmd (getvar "CMDECHO"))
(setvar "CMDECHO" 0)
;;=============================================
;; Break many objects with a selected objects
;; Selected Objects create ss to be broken
;;=============================================
;;==========================================================
;; Break selected objects with any objects that touch it
;;==========================================================
;;/'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\.
;; E n d O f F i l e I f y o u A r e H e r e
;;/'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\./'\.