You are on page 1of 2

How to apply for HR-SEM Slot

The requisition form for HR-SEM analysis may be downloaded online at http://saif.iitm.ac.in/pdf1/hrsem.pdf or
collected by person from SAIF office (only 4 samples per slot).
Fill in the particulars & get DD for the total amount as mentioned in the sample requisition form.
The sample requisition form along with DD should reach the address mentioned below by person or through post
(No samples should be sent along with it).

The Head,
SAIF,
IIT Madras,
Chennai-600036.

Slots for measurements would be made on queue basis at a convenient time both for the operator and the
applicant through telephone/email conversation.
It is sufficient to bring the samples at the time of appointment.

Sample Requirements

Sample should be dry & non-magnetic.


Powder/ metal/ thin-film/ biological samples are accepted for analysis.
For thin films, conducting substrate should be chosen. Eg: Copper, Aluminum foil.
Biological & liquid samples may be coated / drop-casted on a glass plate (1cm * 1cm) and dried well before the
allotted slot timings.

Quantity & size of the sample required:

Powder: 1 to 10 milligram
Metal / Thin film :10 mm * 10 mm * 5 mm (length * breadth * thickness) approximately.

Charges for the HR-SEM & EDAX Measurements


(Including taxes)

Industries Large
Measurement Scale Medium & National Labs Educational Institutions
SSI

SEM imaging only Rs. 5730/- per sample Rs. 2580/- per sample Rs. 870/- per sample SEM image

Both SEM imaging Rs. 1280/- per sample SEM image with
Rs. 8550/- per sample Rs.3830/- per sample
and EDAX data EDAX data

SEM image, EDAX Rs. 1550/- per sample SEM image with
Rs. 10320/- per sample Rs. 4650/- per sample
data and WDS EDAX data and WDS
SOPHISTICATED ANALYTICAL INSTRUMENT FACILITY
INDIAN INSTITUTE OF TECHNOLOGY, MADRAS, CHENNAI - 600 036
Requisition for HR-SEM measurements at SAIF (Maximum 4 samples)
Date:

Name of the Applicant Name of the Research Supervisor

Address for Communication Bill Claim Address

Mobile No: Email:

DD. No. ., Date ..,, Amount.., Bank. ..

Nature of the Nature of the


Charges
Sample study Approximate
Sl. Sample
Magnification
No code SEM /
Powder/ metal / SEM / Required
SEM-EDAX
film / Biological SEM-EDAX
1.
2.
3.
4.

Total =
Purpose for which the measurement is required:
(in brief)
Broad Research Area/Topic :
This is to certify that the user is bonafide student under my supervision.

Signature of the Research Supervisor Seal Signature of the Applicant

* No samples should be sent along with the application and DD. (Maximum 4 samples)
** Samples will be done only in the presence of the concerned user during their slot.
*** Samples sent along with the application will neither be registered nor considered for measurements.

Charges for the measurement should be made through an advance demand draft drawn in favor of The Registrar,
I.I.T. Madras, to the Head, SAIF, IIT Madras, Chennai-600036.

As per the guide lines of the Department of Science and Technology (DST), in all publications of Research work,
where in the analytical services of the SAIF have been made use of, the DST and the SAIF shall be duly acknowledged. Kindly
send us the publication reference (Journal name / volume Number / names of the authors date of issue of the publication
etc) to us.

(Office Use) Ref. No: SEM 20

You might also like