You are on page 1of 22

MITCHELL 2ND HALF 2014 INSTALL.

"BEFORE ANYTHINE DEABLE YOUR INTERNET"

PLEASE READ-MITCHELL 2014-2 INSTALL

If you want Mitchell Manager to work with OnDemand


PLEASE Install the manager first.

If you download the ISO's Please exstact them in to


folders(Repair 1_14_2A thru Repair 1_14_2T, and ESTIMATOR
1_14_2A)in a Dir. called Mod 2nd half 2014.
Now you are ready to install Mitchell OnDemand 2nd half 2014.

Open up the M586 dir.


Please click on StrtDsc2.exe
Click on Run

Click on next
Check the box to accept all terms
Then click next

Please click next


OK now click Finish
Please open up the M582 folder again and click on the Fix folder
Copy the cracked Od5.exe
There should be a new icon on your desktop
Please Right click it

Now click on the Open file location


copy the cracked Od5.exe to the install folder
Now close the program

Now from the desktop start the Od5 program


you may get a screen that looks like this

just click on OK
Now click on the Add Data tab

Now check both the boxs for Repair and Estimator


Click Next
Now click on the browse button

Now you need to go to the Dir where the Data is


Please click on OK

Please click on Next


Pleas change the Locations for the disc's as shown
Now you can click on the Next
Please click on the Next

Now you can click on the ESTIMATOR 1_14_2A and click OK

Please click on Next


Please click on Next
Please check the box to have the Estimator Data moved to the C-
Drive
click on the Next

Now you should have a working Mitchell OnDemand

THIS IS FOR WINDOWS 7 64bit


but the setup is the same for XP pro
If you use any thing other then XP 32bit
You will need to add

Manager Training Videos fix for 64-bit Vista & Windows7. Note:
UAC MUST FIRST BE DISABLED
1. Installed winhlp32.exe, which can be obtained here:
http://support.microsoft.com/kb/917607
2. Run the 64bitWinHelp.reg

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\WinHelp]
"AllowProgrammaticMacros"=dword:00000001
"AllowIntranetAccess"=dword:00000001

You might also like