The document shows approximate cutting speeds in inches per minute for different materials at varying thicknesses when cut with an abrasive waterjet orifice of different diameters at a pressure of 60,000 PSI. Materials listed include aluminum, stainless steel, titanium, marble, and glass. Cutting speeds generally increase with larger orifice diameters and decrease with thicker material heights. Information on abrasive flow rates for different orifice sizes is also provided.
The document shows approximate cutting speeds in inches per minute for different materials at varying thicknesses when cut with an abrasive waterjet orifice of different diameters at a pressure of 60,000 PSI. Materials listed include aluminum, stainless steel, titanium, marble, and glass. Cutting speeds generally increase with larger orifice diameters and decrease with thicker material heights. Information on abrasive flow rates for different orifice sizes is also provided.
The document shows approximate cutting speeds in inches per minute for different materials at varying thicknesses when cut with an abrasive waterjet orifice of different diameters at a pressure of 60,000 PSI. Materials listed include aluminum, stainless steel, titanium, marble, and glass. Cutting speeds generally increase with larger orifice diameters and decrease with thicker material heights. Information on abrasive flow rates for different orifice sizes is also provided.