Professional Documents
Culture Documents
net
Introduction
Notes
The basic workflow for OpenStudio
starts in the SketchUp Plug-in creating
the building envelope and assigning
space attributes.
OpenStudio Application
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 1
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Constructions
Loads
Space Types
Facility
Spaces
Thermal Zones
HVAC Systems
Minimal Workflow Through
OpenStudio Application Output Variables
Simulation & Results
Simulation Settings
Site
Scripts/Measures
Thermal Zones
Run Simulation
HVAC Systems Results Summary
Run Simulation
Results Summary
Choose Template
Building Envelope
Surface & Space Attributes
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 2
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (March 2015) openstudio.net
SketchUp Choose
Template
Notes
The Space Type and Construction Set
Wizard will dynamically create Open-
Studio spaces types from data on the
Building Component Library (BCL)
website based on user input related Open OpenStudio Model
Save OpenStudio Model
to vintage, climate zone, and building
type. New OpenStudio Model Save OpenStudio Model As
Climate Zones:
1-8 (see map)
Choose Template
Click for instructions on getting
Building Envelope
a BCL Auth Key
Surface & Space Attributes
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 3
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (March 2015) openstudio.net
SketchUp -
Building Envelope
Notes
After using native SketchUp tools
to draw a space outline, you use the
New Interior
Spaces From Diagram tool to project Partition Surface
the diagram into a multistory building. Group
Although the geometry is automati-
cally generated from the diagram, you
can edit it using standing SketchUp
Tools. New Shading Surface Create Spaces Project Loose
Group From Footprint or Geometry
You can take a similar approach Spaces Diagram
for fenestration. Again draw loose
Line Tool
geometry with native SketchUp tools,
but this time use the Project Loose Ge- Rectangle Tool
ometry tool to apply the fenestration
to the appropriate spaces. Optionally
use the user scripts to create windows
based on window to wall ratio or
project overhangs based on a projec-
tion factor.
Projected Geometry
You can create additional model
geometry using the Shading Surface
Tool and the Interior Partition Surface
Tool. Spaces can also be imported
from gbXML.
Resulting Spaces
Space Diagram
Choose Template
Building Envelope
Surface & Space Attributes
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 4
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (March 2015) openstudio.net
Then you can use the Space Attributes Surface Render Mode Aware Launch OpenStudio
tool to assign various attributes to Matching Inspector Application
a space. There is a matching render
Render By Boundary Condition
mode for each space attribute. To
apply space attributes, select one or Render By Construction Set Space Render Modes
more spaces, and then click the Space Attributes Story
Attributes tool. Render By Space Type Thermal Zone
The image to the right shows a Render By Thermal Zone Space Type
composite of the same model viewed Render By Story
in different render modes. In prac-
tice your entire model will render in
a single mode at a given time. This Surface Boundary
Condition
example is just to demonstrate the
render modes side by side.
Choose Template
Building Envelope
Surface & Space Attributes
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 5
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (March 2015) openstudio.net
Choose Template
Building Envelope
Surface & Space Attributes
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 6
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Constructions
Loads
Space Types
Facility
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 7
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 8
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Preferences Menu
Notes
The Units menu lets you switch be-
tween SI and IP units. This affects input
Menu Bar
fields and not the output results.
Facility
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 9
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Scripts/Measures
Select measure or hit Find Measures
on BCL to search for new measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 10
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Facility
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 11
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 12
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
1. Go to https://bcl.nrel.gov/user/
register and follow the registration
instructions. Step 3 - Click My Dashboard
2. Check your email for the confirma-
tion to activate your account, then
login.
3. Click My Dashboard
4. Select and copy the Key.
5. Return to OpenStudio and paste
the key into the input box.
Simulation Settings
Scripts/Measures
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 14
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 15
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
Duplicate selected bill Delete bills: select an item in the panel above and click delete to remove
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 16
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Facility
Spaces
Remove schedule
Simulation Settings
Edit: allows you to select certain components
and edit the settings for that component. It
Scripts/Measures is used in the HVAC tab to edit component
Drop Zones Accepts schedules from My Model settings, assign thermal zones to loops, and to
Run Simulation or Library add plenums.
Results Summary
Accepts schedule
sets
Duplicates schedule set Delete schedule set by selecting the set and hitting this button
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 17
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Schedules Schedules
Notes
This tab is a visual editor for Ruleset
Schedules. As the name implies, a
Menu Bar
schedule consists of a series of rules.
Each rule or profile can be applied for
a specific date range and for specific
Sub-tabs
days of the week.
Site
Delete rule
If two rules appear on the same day, Schedules
Resource Tabs
the one with a higher priority is used.
You can use the rule colors to visually Constructions
scan the entire year in the calendar on Scroll to Days of week and date
the right of the body to see what rule Loads find add rule range for rule
is applied for a specific day. button
Space Types
A new profile starts as a flat line.
Double click to split the profile and Facility
then drag one segment up or down.
Vertical sections can also be dragged Spaces
left or right. Click Set Limits to change
Double click on
the vertical limits of your profile. To Thermal Zones
type precise values for a profile, mouse Throughout horizontal line
the application, Double click vertical to split profile
over the profile and enter a value with HVAC Systems mousing over an line To merge profile
your keyboard. object will display
Output Variables the full name
Although you can use Compact and
Simulation & Results
Zoom to smaller
When zoomed in drag this box
timestep
to navigate
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 18
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Constructions
If you need to download additional
Construction Sets constructions and materials go
to the menu to search or browse
Notes constructions and materials.
A Construction Set object is structured
very much like the Schedule Set. It can
Menu Bar
contain constructions for different sur-
face types and boundary conditions.
Sub-tabs
A construction set can be applied to
Site
an entire building, a story, a space
type, or an individual space. Schedules
Resource Tabs
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 19
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Constructions
Constructions
Notes
The Constructions sub-tab lists
construction objects that are in your
Menu Bar
model. You can drag additional
constructions here from the library.
Constructions downloaded using the
Sub-tabs
Online BCL window will appear in the
Site
library with a BCL flag.
Schedules
Resource Tabs
A construction consists of one or more
material layers. You can add materials Constructions
by dragging them from My Model or
the Library to the drop zone. You can Loads Standards Tags used by
Measures (Optional)
only add new materials to the bottom
which represents the inside of the wall. Space Types
You can delete any material by clicking
the x next to the name. Facility
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 20
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Constructions Materials
Notes
Constructions are made of one or
more layers of materials. The
Menu Bar
Materials sub-tab lets you inspect and
edit those materials.
Sub-tabs
There are various classes of material Site
objects. When you add a new material,
first select the heading for the type Schedules
Resource Tabs
of material you want to add and then
click the + icon at the bottom of the Constructions
left pane.
Loads
Different types of material will have
different data fields available. Space Types
Facility
Used by OpenStudio
Measures
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
Edit material attributes
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 21
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Loads
Notes
The Loads tab contains internal load
definitions that can be used through-
Menu Bar
out the model.
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 22
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
The steps for using multi-edit for Facility Will apply the yellow highlighted
applying an item to multiple space item to other checked rows
types are below: Spaces
1. After dragging in an item from
the library, select it and edit any Thermal Zones Click an item and select Edit in the
features you need to in the Edit right panel to edit settings.
panel on the right. HVAC Systems
2. Check the rows you would like to Click to open a dialog When selected you can hit the Apply to
and change the rendering Selected button to add this item to
add this same component to. Note
Output Variables color of the space type other checked space types
that when you check the rows the
yellow highlight disappears on the
Simulation & Results
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 24
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Facility Building
Notes
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 25
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 26
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Thermal Zones
If Thermal Zone is on an air
Notes loop, Ideal Air Loads will
be turned off
The Thermal Zones tab has four main
functions.
1. Turn ideal air loads on and off. This Menu Bar Delete the single
is a basic way to get heating and instance of item
cooling load set points without Sub-tabs from grid
having to define a detailed HVAC
system. Site Select this check box to
2. Attach zone equipment to your add it to the Custom button
zone, for example a Packaged Schedules option above
Resource Tabs
Terminal Air Conditioner.
3. Assign thermostats to your ther- Constructions
mal zone.
4. Set Sizing Parameters Loads Select buttons to change the fields
available for the thermal zones
The steps for using multi-edit for add- Space Types
ing a copy of an item to other thermal
zones are below: Facility
1. After dragging in an item from
the library, select it and edit any
features you need to in the Edit
Spaces
panel on the right. Apply to Selected button at top
2. Check the rows you would like to Thermal Zones of column will apply the yellow
add this same component to. Note highlighted item to other checked
HVAC Systems Click an item and select Edit the yellow highlighted
that when you check the rows the rows highlighted in blue
Edit in the right panel to item here
yellow highlight disappears on the edit settings
component you edited in step 1. Output Variables
3. After selecting the rows you When selected you
Simulation & Results
You can duplicate and delete multiple Multiple zone equipment objects can
rows by checking the rows and using be attached to a thermal zone
the buttons on the bottom left.
Tip
A Thermal Zone cant have ideal air
loads on and have an Air Loop or Zone
Equipment at the same time. If you try Plus: Adds a new thermal zone
to use both, the previously selected 2X: Duplicates checked rows
system will be disabled. X: Deletes checked rows
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 27
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 28
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Constructions
Loads
Space Types
Facility
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 29
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Spaces
Output Variables
Setpoint
Manager
Simulation & Results
Simulation Settings
Select dotted line to
Scripts/Measures rename and edit loop
Run Simulation
Click to
Results Summary view Cooling coil
air loop
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 30
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Thermal Zones
HVAC Systems
Output Variables
Setpoint
Simulation & Results
manager
Simulation Settings
Scripts/Measures
Run Simulation
Click to View Chiller
Results Summary
Cold Water Plant
Loop
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 31
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
The heating coils without links rep- Space Types Pump Adiabatic pipe
resent the reheat terminals for each
connected thermal zone. Facility
Spaces
Thermal Zones
HVAC Systems
Output Variables
Setpoint
Simulation & Results
manager
Simulation Settings
Scripts/Measures
Run Simulation
Click to view
air loop
Results Summary Heating coil
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 32
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
HVAC Systems
Output Variables
Simulation & Results
Return
Simulation Settings plenum
Shared supply plenum
Scripts/Measures
Run Simulation
Step 1 - Click to on
Results Summary
zone to add plenum
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 33
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Mains Editor
Notes
The first view into the HVAC tab will be
the water mains editor, which shows as
Menu Bar Zoom
Service Water on loops pulldown list.
Only available for loop
Sub-tabs air loops view
Water enters the system at the right
and leave at the Sewer on the left. One
Site
or more water use connections can be
Add Only
added in the middle. Schedules and delete available for
Resource Tabs
air and plant refrigeration
Clicking a water use connection will Constructions loops
take you to a model window where
you can add water use equipment. Loads Add water use
connection from library
Space Types
Facility
Thermal Zones
HVAC Systems
Output Variables
Water use
Simulation & Results
Scripts/Measures
Run Simulation
Results Summary
Click to view
water use connection
equipment
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 34
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Connection
Notes
Dragging a water use equipment ob-
ject into the water use connection will
Menu Bar
create an instance of that definition.
Much like lights, people and other
loads, there is a fractional schedule to
Sub-tabs
define usage patterns.
Site
Optionally you can associate the Schedules
Resource Tabs
equipment with a space. There is no di-
rect energy use to the space, but heat Constructions
from the equipment will be added to
the space. Loads
Makeup Water
The equipment can be anything that Space Types
uses water, hot or cold. The definition
contains a peak flow rate and a target Facility Click to view
temperature schedule. Hot and cold Service Hot
water will mix to reach the target tem- Spaces Click to view Water loop
perature at the fixture. Service Hot
Water loop
Thermal Zones
Click the water main, sewer, or makeup
water to go back to the water mains HVAC Systems Sewer
editor. If you have a plant loop associ-
Water main
ated with the water use connection Output Variables
the Loop button will take you to the Water use
Simulation & Results
Scripts/Measures
Run Simulation
Results Summary
Click to view
water mains
editor
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 35
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 36
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
System
Notes
The refrigeration system interface can
be accessed by selecting refrigeration
from the drop down menu.
Menu Bar
Grid View of Refrigeration
To add a refrigeration system Sub-tabs
select one from the library and add
Site
drag it to the drop zone.
Not Only
Schedules used in available for Delete Refrigeration System
Resource Tabs
Click on the zoom button by the name refrigeration air loops
of the refrigeration system to go to a Constructions
view of that system, add components Zoom in to Single
Refrigeration System
from the library. Loads
Space Types
Facility
Spaces
Thermal Zones
Add by Dragging
a Refrigeration System
HVAC Systems from Library
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Refrigeration System
Run Simulation Template
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 37
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Simulation Settings
Scripts/Measures
Add refrigeration cases
in drop zone Summary view of cases
Run Simulation
Click arrow to expand the view and
inspect individual cases
Results Summary
Add cascade systems from
the Library or My Model
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 38
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 39
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
System
Notes
Variable refrigerant flow (VRF) systems
can be added by dragging them onto
Menu Bar For VRF Only
the large drop zone from the library.
the Layout View
Sub-tabs is Available
This view provides a view of all the VRF
systems in the model. The zoom icon Site
by the name of the system will open
a detailed view of that system. This Schedules
Resource Tabs
single system view is shown on the
next page. Constructions
Loads
Space Types
Click to Open a Detailed
Facility View of the System Delete the VRF System
Spaces
Number of
Thermal Zones Terminals and Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 40
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Spaces
Thermal Zones
HVAC Systems
Delete Zone From System
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Tip
Run Simulation Delete Terminal From
Add one thermal zone and edit the System
settings in the Edit tab and when you Results Summary
add a new zone to the system, the set-
tings from that terminal will be applied
to the new one.
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 41
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Output Variables
Notes
The Output Variables tab creates a
list of variables based on the type of
Menu Bar
objects you have in your model. You
can then turn them on or off and set
Sub-tabs
the frequency of reporting.
Site
These variables populate the SQL file
generated by EnergyPlus with annual Schedules
Resource Tabs
time series results data. You can view
them in ResultsViewer. The Results Constructions
Summary tab in this application is not
affected by the variable requests. Loads
Output Variables
Simulation & Results
Simulation Settings
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 42
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Simulation Settings
Notes
The Simulation Settings tab lets you
inspect and customize many of the
simulation settings used by
Menu Bar
EnergyPlus.
Sub-tabs
RunPeriod Site
SimulationControl Schedules
Resource Tabs
SizingParameters
ProgramControl
Constructions
Timestep Loads
OutputControlReportingTolerances
ConvergenceLimits Space Types
ShadowCalculation
Facility
SurfaceConvectionAlgorithmInside
SurfaceConvectionAlgorithmOutside Spaces
HeatBalanceAlgorithm
Thermal Zones
ZoneAirHeatBalanceAlgorithm
ZoneAirContaminantBalance HVAC Systems
ZoneCapacitanceMultipleResearchSpecial
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 43
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Measures Add to
Simulation Workflow
Notes
Download measures from The Building
Component Library (BCL). Drag mea-
Menu Bar
sures from the library to the central
panel.
Sub-tabs
Move Measure Up or Down
There are three types of measures:
Site In Order of Application to
OpenStudio Measures are run on Model
the OSM model before it is Schedules Select a Measure to Edit Inputs
Resource Tabs
converted to an IDF.
EnergyPlus Measures can be run Constructions
on the IDF file before it is handed to
EnergyPlus. Loads
Reporting measures produce Drag measures here to apply
reports to chart results, provide Space Types to model
quality assurance, and quality
control on models. Facility
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 44
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Facility
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 45
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 46
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation & Results
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 47
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Results Summary
OpenStudio Results
Notes
The Results Summary tab is populated
with data after you run a simulation. Menu Bar
The standard reports available are:
Results | OpenStudio Sub-tabs
Calibration | OpenStudio
EnergyPlus Results Site Select the Report Type Here
Launch ResultsViewer to View Time
Series Variables
You can create custom reporting Schedules
measures. Check out the measure
writing guide at http://nrel.github.io/ Constructions
OpenStudio-user-documentation/refer-
ence/measure_writing_guide/ Loads
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 48
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Results Summary:
Calibration
Notes
To calibrate to the ASHRAE 14-2002 or Launch ResultsViewer to View Time
FEMP standard the file must contain Series Variables
Menu Bar
all utility data for one year and real
weather data. Check the guidelines for
Sub-tabs
additional
requirements. Site
By selecting the Schedules Select the Report Type Here
Calibration | OpenStudio report you
can compare the model and actual Constructions
utility bills.
Loads
The report provides ASHRAE 14-2002
calibration standard and the FEMP Space Types
calibration standard options.
Facility
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 49
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
OpenStudio 1.9.0 Basic Workflow Guide (September 2015) openstudio.net
Results Summary:
EnergyPlus Results
Notes
The HTML view of the
EnergyPlus report is available through
Menu Bar
the drop down report menu.
Sub-tabs
Constructions
Loads
Space Types
Facility
Spaces
Thermal Zones
HVAC Systems
Output Variables
Simulation Settings
Scripts/Measures
Run Simulation
Results Summary
OpenStudio is developed in collaboration by NREL, ANL, LBNL, ORNL, and PNNL. Page 50
NREL is a National Laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.