Professional Documents
Culture Documents
3096 SMSCP Hardware Requirements 01.08.14
3096 SMSCP Hardware Requirements 01.08.14
Hardware Requirements
For the SMSCP mechatronic training system
Mechanical components
o Chain, belt, and gear drives
o Bushings, bearings and gearboxes
o Clutches and brakes
o Conveyor belts, lifts, shuts and component storage
o Grippers, jaws and pivot devices
o Fasteners, supports and springs
1
Siemens AG 2014. All rights reserved
Pneumatic/Hydraulic Components:
General pneumatic (hydraulic) components
o Pressure source (compressor/pump)
o Pressure regulation valve with filter and gauge
o Shut-off valve
Pneumatic (Hydraulic) actuators/cylinders
Pneumatic (Hydraulic) gating, valves and flow control
o Different DCV designs (e.g. 2/2-, 3/2-, 4/2-, 5/2-, 5/3-way)
o Flow control valves
PLC Components:
NOTE: PLC components have to be from Siemens! Series S7-300 or S7-1500
Personal Computer with PLC Editing software (e.g. SIMATIC S7, STEP7 Professional)
PC to PLC adapter
PLC Components:
o Power supply
o CPU
o Memory cards
o Digital in- and output modules
o Control Desk with (illuminated) pushbuttons, switches (n.o./n.c.) and indicators
Electrical Components
o Analog sensors such as ultrasonic- or hall-effect sensors
Electrical Machines
o Step motors
o Single phase and Three phase AC motors
Direction control
Speed control Variable frequency drives
Guards and mechanical safety devices
PLC related
o Simulation software (e.g. SIMIT)
o Analog In- and Output modules
o PROFIBUS/ PROFINET System with field devices
SIMATIC HMI TP700 COMFORT with HMI Editing software SIMATIC WinCC Advanced
2
Siemens AG 2014. All rights reserved