Professional Documents
Culture Documents
PO Box 1502
Vineland, NJ 08362-1502
888-546-2531
856-692-8500
856-692-3242 Fax
TECHNICAL INFORMATION: info@kimble-kontes.com
Ground Ware www.kimble-kontes.com
GROUND WARE
ASTM Commercial Standards (and latest revisions) are strictly observed in the
manufacture of Kontes interchangeable taper-ground joints, stopcocks, stop-
pers, and spherically-ground joints. The following tables are consistent with
ASTM specifications and are reproduced here for your convenience.
Standard Dimensions for Full-length Interchangeable Standard Dimensions for Short-length Interchangeable
Taper-Ground Joints Taper-Ground Joints
Computed Computed
Diameter at Diameter at
Standard Approximate Approximate Large End of Standard Approximate Approximate Large End of
Joint Size Diameter at Length of Ground Zone Joint Size Diameter at Length of Ground Zone
Number (T S Small End Ground Zone (Gauging Point) Number (T S Small End Ground Zone (Gauging Point)
Designation) mm mm mm Designation) mm mm mm
PDF Page 1 of 2
GROUND WARE (continued) Standard Dimensions for Interchangeable Straight-bore
Taper-Ground Stopcocks Standard
Standard Dimensions for Medium-length Diameter Diameter
Standard of Plug at Length of Bore
Interchangeable Taper-Ground Joints
Stopcock Center Line of Shell Hole in
Computed
Number (TS of Bore 0.5 mm, Plug
Diameter at
Designation) mm mm mm
Standard Approximate Approximate Large End of
Joint Size Diameter at Length of Ground Zone 1M (Micro size) 7 20 1
Number (TS Small End Ground Zone (Gauging Point) 1 ........................ 12 30 1
Designation) mm mm mm 1.5 ..................... 12 30 1.5
2 ........................ 12 30 2
5/12 .............. 3.8 12 5.0
3 ........................ 17 40 3
7/15 .............. 6.0 15 7.5
4 ........................ 17 40 4
10/18 .............. 8.2 18 10.0
5 ........................ 20 44 5
12/18 ............. 10.7 18 12.5
6 ........................ 20 44 6
14/20 ............. 12.5 20 14.5
8 ........................ 25 52 8
10 ........................ 35 56 10
19/22 ............. 16.6 22 18.8
24/25 ............. 21.5 25 24.0
29/26 ............. 26.6 26 29.2
34/28 ............. 31.7 28 34.5
40/35 ............. 36.5 35 40.0
PDF Page 2 of 2