Professional Documents
Culture Documents
*********************FILE VERSION**************************************
FILE_VERSION 4 // Used with Minesight 3D version 10.0 and higher.
// Do not change this number.
*********************MEASUREMENT***************************8***********
MEASUREMENT METRIC // Allowed values are METRIC or IMPERIAL.
// If not specified, the values are presumed to be
// in Metric Units. If measurent system used by this
// file does not match to the system defined by Project
// Settings all values will be converted automatically.
*************ORE********SG **
ROCK_TYPE COPPER 2.87
ROCK_TYPE LEAD 3.27
************(M)*******
BURDEN 3.5
GRAVITY 3.0
*****************DATE FORMAT*****************************************
DATE_FORMAT %x // Use time representation for current locale
#*****************************************************
#
# Example of setting the Drillhole Polyline Materials.
#
# Note this example comes commented out (disabled) with # character.
#
#***********************DIAMETER*****MATERIAL_NAME*****
#DRILLHOLE_MATERIAL 70 "Ring_HOLE_70"
#DRILLHOLE_MATERIAL 89 "Ring_HOLE_89"
#DRILLHOLE_MATERIAL 102 "Ring_HOLE_102"
#DRILLHOLE_MATERIAL 110 "Ring_HOLE_110"
#DRILLHOLE_MATERIAL 115 "Ring_HOLE_115"
#DRILLHOLE_MATERIAL 140 "Ring_HOLE_140"
#*****************************************************
#
# Example of setting the Charge Polyline Materials for different
# charging parameters.
#
# Note this example comes commented out (disabled) with # character.
#
#********************EXPLOSIVE****DENSITY****DIAMETER*****MATERIAL_NAME*****
#CHARGE_MATERIAL ANFO POUR 140 "Ring_ANFO_POUR_140"
#CHARGE_MATERIAL ANFO POUR 89 "Ring_ANFO_POUR_89"
#CHARGE_MATERIAL ANFO POUR 102 "Ring_ANFO_POUR_102"
#CHARGE_MATERIAL ANFO POUR 110 "Ring_ANFO_POUR_110"
#CHARGE_MATERIAL ANFO POUR 115 "Ring_ANFO_POUR_115"
#CHARGE_MATERIAL ANFO BLOW 140 "Ring_ANFO_BLOW_140"
#CHARGE_MATERIAL ANFO BLOW 70 "Ring_ANFO_BLOW_70"
#CHARGE_MATERIAL ANFO BLOW 89 "Ring_ANFO_BLOW_89"
#CHARGE_MATERIAL ANFO BLOW 102 "Ring_ANFO_BLOW_102"
#CHARGE_MATERIAL ANFO BLOW 110 "Ring_ANFO_BLOW_110"
#CHARGE_MATERIAL ANFO BLOW 115 "Ring_ANFO_BLOW_115"
#CHARGE_MATERIAL ENERGAN POUR 140 "Ring_ENERGAN_POUR_140"
#CHARGE_MATERIAL ENERGAN POUR 89 "Ring_ENERGAN_POUR_89"
#CHARGE_MATERIAL ENERGAN POUR 102 "Ring_ENERGAN_POUR_102"
#CHARGE_MATERIAL ENERGAN POUR 110 "Ring_ENERGAN_POUR_110"
#CHARGE_MATERIAL ENERGAN POUR 115 "Ring_ENERGAN_POUR_115"
#CHARGE_MATERIAL ENERGAN BLOW 140 "Ring_ENERGAN_BLOW_140"
#CHARGE_MATERIAL ENERGAN BLOW 70 "Ring_ENERGAN_BLOW_70"
#CHARGE_MATERIAL ENERGAN BLOW 89 "Ring_ENERGAN_BLOW_89"
#CHARGE_MATERIAL ENERGAN BLOW 102 "Ring_ENERGAN_BLOW_102"
#CHARGE_MATERIAL ENERGAN BLOW 110 "Ring_ENERGAN_BLOW_110"
#CHARGE_MATERIAL ENERGAN BLOW 115 "Ring_ENERGAN_BLOW_115"
#CHARGE_MATERIAL ISANOL50 POUR 140 "Ring_ISANOL50_POUR_140"
#CHARGE_MATERIAL ISANOL50 POUR 89 "Ring_ISANOL50_POUR_89"
#CHARGE_MATERIAL ISANOL50 POUR 102 "Ring_ISANOL50_POUR_102"
#CHARGE_MATERIAL ISANOL50 POUR 110 "Ring_ISANOL50_POUR_110"
#CHARGE_MATERIAL ISANOL50 POUR 115 "Ring_ISANOL50_POUR_115"
#CHARGE_MATERIAL ISANOL50 BLOW 140 "Ring_ISANOL50_BLOW_140"
#CHARGE_MATERIAL ISANOL50 BLOW 70 "Ring_ISANOL50_BLOW_70"
#CHARGE_MATERIAL ISANOL50 BLOW 89 "Ring_ISANOL50_BLOW_89"
#CHARGE_MATERIAL ISANOL50 BLOW 102 "Ring_ISANOL50_BLOW_102"
#CHARGE_MATERIAL ISANOL50 BLOW 110 "Ring_ISANOL50_BLOW_110"
#CHARGE_MATERIAL ISANOL50 BLOW 115 "Ring_ISANOL50_BLOW_115"
#*****************************************************
#
# Example of setting the Primer Polyline Materials for different
# charging parameters.
#
# Note this example comes commented out (disabled) with # character.
#
#********************PRIMER_NAME*********MATERIAL_NAME*****
PRIMER_MATERIAL Det1 "Ring_Det1"
PRIMER_MATERIAL Det2 "Ring_Det2"
PRIMER_MATERIAL Det3 "Ring_Det3"
#_________________________________________________________________________
# Glossary:
#
# comment - string following the characters "**", "#" or "//"
#
# BLOW DENS - density (tonnes/m3|tons/cu ft) for explosive loaded
# by blow method;
#
# BURDEN - distance between ring planes(m|ft);
#
# CHARGE_MATERIAL - defines Charge Polyline Materials for different
# combinations of EXPLOSIVE, DENSITY and DIAMETER.
#
# If no Charge Material is set for a required
combination,
# the charge polyline is styled by Default Charge
# Materials - Ring ChargePour or Ring ChargeBlow.
#
# If specified Charge Material does not exist it will
# be created automatically. Note, Charge Labels always
# use Default Materials.
#
# DATE_FORMAT - defines date format to be used in reports. This can
# include one or more tokens like the following:
# %a - Abbreviated weekday name
# %A - Full weekday name
# %b - Abbreviated month name
# %B - Full month name
# %c - Date and time representation appropriate for
locale
# %d - Day of month as decimal number (01 31)
# %H - Hour in 24-hour format (00 23)
# %I - Hour in 12-hour format (01 12)
# %j - Day of year as decimal number (001 366)
# %m - Month as decimal number (01 12)
# %M - Minute as decimal number (00 59)
# %p - Current locales A.M./P.M. indicator for 12-
hour clock
# %S - Second as decimal number (00 59)
# %U - Week of year as decimal number, with Sunday
as first day of week (00 53)
# %w - Weekday as decimal number (0 6; Sunday is
0)
# %W - Week of year as decimal number, with Monday
as first day of week (00 53)
# %x - Date representation for current locale
# %X - Time representation for current locale
# %y - Year without century, as decimal number (00
99)
# %Y - Year with century, as decimal number
#
# Example: %d/%m/%y , which will be translated to a
date like 24/01/04.
#
# DIAMETER - hole diameter or drill size (mm|inches);
#
# DRILLHOLE_MATERIAL - defines Drillhole Polyline Materials for different
# combinations of DIAMETER.
#
# If specified Drillhole Material does not exist it
will
# be created automatically.
#
# FILE_VERSION - version of this file.
#
# GRAVITY - specific gravity of ore type (tonnes/m3|cu ft/tons);
#
# RIG HEIGHT - height above floor of drill origin (m|ft);
#
# MAST LEN. COL. END - mast length collar end (m|ft);
#
# MAST LEN.DRIFT.END - mast length drifter end (m|ft);
#
# MAST WIDTH LEFT distance left of drill(m|ft);
#
# MAST WIDTH RIGHT distance right of drill(m|ft);
#
# MAX DIP BLOW - maximum dip angle permitted for explosive loading
# by blowing (degrees);
#
# MIN HD HGT - minimum heading clearance height for rig(m|ft);
#
# MIN HD WIDTH - minimum heading clearance width for rig(m|ft);
#
# POUR DENS - density (tonnes/m3|tons/cu ft) for explosive loaded
# by pour method;
#
# ROD LENGTH - Length of the drill rod(m|ft);
#
# PRIMER_MATERIAL - defines Primer Material for different types of
# primers (detonators);
#
# If specified Primer Material does not exist it will
# be created automatically.
#
# TOE SPACE - toe spacing (m|ft);
#
# ROCK_TYPE - type of ore;
#
# EXTERNAL - for external fans (no neighbouring drill region);
#
# INTERNAL - for internal fans (neighbours next drill region);
#
# MULTIPLIER - multiplier for varying toe spacing
# with angle of incidence to drilling boundary;
#
# LINE_WEIGHT - Line weights (thicknesses) for currently selected
# plane, heading,regions and rig. It should be within
# 1...10;
#