Professional Documents
Culture Documents
Boq
Boq
Construction of Road over Bridge including Approaches at Butibori on Nagpur - Hyderabad Road (NH - 7) in Lieu of Existing Level Crossing No. 113
BILL NO. 1
1. SITE CLEARANCE AND DISMANTLING
1.01 Clearing and grubbing road land complete as per Technical Hct. 2.3
Specificationss Clause 201. -
7-1
1. SITE CLEARANCE AND DISMANTLING (Contd...)
k) Footpath sq.m. -
1.03 Removal of stumps of felled trees above 300 mm girth complete nos. 15
as per Technical Specificationss Clause 201.
-
7-2
BILL NO. 2
2. EARTH WORK
2.01 (a) Earthwork in excavation necessary for construction of roadway cu.m. 8,200
in all types of soil all complete as per Technical Specificationss -
Clause 301.
(b) Excavation of ordinary rock for construciton of roadway all cu.m. -
complete as per technical Specificationss Cl.301.
2.02 (a) Excavation in all types of soil in road shoulders, verge, median cu.m. -
etc. for widening of carriage way/pavement all complete as per
Technical Specificationss Clause 301.
7-3
2. EARTH WORK (Contd)
2.05 Construction of subgrade and earthen shoulder satisfying the cu.m. 15,800
requirements of minimum soaked CBR value as indicated in the
Specifications with approved material with all leads & lifts all
complete as per Technical Specificationss Clause 305. -
2.07 Filling in median/island with approved material with all leads and cu.m. 290
lifts complete as per Technical Specifications Clauses 305.
-
2.09 Turfing of embankment slopes, verge earthen shoulders and other sq.m. 8,220
locations with rough grassing all complete as per Technical
Specificationss Clause 307. -
7-4
2. EARTH WORK (Contd)
2.14 Loosening and recompacting of existing ground in all kinds of soil cu.m. 140
sub-grade in all kinds of soil complete as per Technical
Specificationss Clauses 305 for building embankemnt, wherever
require.
7-5
BILL NO. 3
3.02 Constructing wet mix macadam base complete as per Technical cu.m. 7,300
Specificationss Clause 406. -
-
-
7-6
BILL NO. 4
4. BITUMINOUS COURSE
4.01 Providing bituminous primer coat over granular surface with sq.m. 23,400
medium curing cutback complete as per Technical Specificationss
Clause 502 @ 9kg / 10 sq.m. -
4.02 (a) Providing tack coat with bituminous cut back all complete as -
per Technical Specificationss Clause 503.
(b) Fog seal as per specification of section 3000 for sealing of sq.m. -
cracks.
(c) Slurry seal as per Technical Specification Clause 516 for sq.m. -
sealing of wider cracks.
7-7
4. BITUMINOUS COURSE (Contd)
4.05 (a) Providing & laying bituminous concrete wearing course cu.m. -
complete as per Technical Specificationss Clause 509.
(b) Providing & laying bituminous concrete wearing course using cu.m. 1,160
bitumen modifier complete as per Technical Specificationss
Clause 509 and 521 and Appendix II of Volume II. -
4.07 Providing and laying 20 mm thick mixed seal surfacing complete sq.m -
as per Technical Specifications clause 512.
4.08 Providing and laying A-Type liquid seal coat complete as per sq.m. -
Technical Specificationss Clause 513.
7-8
BILL NO. 5
5.01 (a) Earthwork in excavation of foundation for structures including cu.m. 20,800 -
pipe culverts in all types of soil complete as per drawings and
Technical Specificationss Clauses 304, 309 & 2903.
(b) Excavation for foundation for structures including pipe cu.m. 4,650 -
culverts in ordinary rock, complete as per drawing and Technical
Specifications 304,309 and 2903
5.02 Back filling behind abutments, wing walls and return walls with cu.m. 2,350
selected granular material of approved quality including all
material, labour, equipment carriage etc. all complete as per
drawing and Technical Specificationss Clause 305.
5.03 Back filling with filter media behind abutments, wing walls, & cu.m. 460
return walls, including all material, labour, equipment carriage etc.
all complete as per drawing and Technical Specificationss Clauses
305, 309 & 2502.
7-9
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
5.07 Cement concrete M-15 grade in bedding of pipe culverts complete cu.m.. 23
as per drawings and Technical Specificationss Sections 1500 &
1700.
5.08 Plain cement concrete/Reinforced cement concrete including -
centering and shuttering but excluding reinforcement all complete
as per drawing and Technical Specificationss Sections 1500 &
1700 in bridges, flyover and culverts.
(a) In foundation -
7-10
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
(c) Super-structure -
(ii) M-20 cu.m -
(iii) M-25 cu.m -
7-11
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
(a) 19 T 13 strands. MT -
(b) 12 T 13 strands. MT 67 -
7-12
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
7-13
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
5.20 Providing and fixing drainage spouts for bridges as per Drawing 142 -
and Technical Specificationss Clause 2705. Nr.
i) M10 cu.m. -
ii) M15 cu.m. -
(c) Providing cement concrete M-15 grade in cut off wall -
complete as per drawing and Technical Specificationss Sections
1500 & 1700 and Clause 2507.
7-14
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
a) 1200mm m 24
b) 1000 mm m -
c) 900 mm m -
d) 750 mm m -
e) 600 mm m -
5.23 Providing and laying selected granular material bedding for RCC cu.m. -
pipes in culverts all complete as per drawings and Technical
Specifications Section 2900.
5.25 a) Stone Pitching 300 mm thick on slopes as per drawings and cu.m. -
Technical Specificationss Section 2500.
b) Stone Pitching 600 mm thick in wire crate as per drawings and cu.m. -
Technical Specificationss Section 2500.
7-15
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
5.27 Providing weep holes in abutments, wing walls, retaining walls, Nr. 400
return walls etc. complete as per drawing and Technical
Specificationss Clause 2706.
5.28 Flush or raised pointing in exposed portion with cement mortar sq.m. -
1:3 (1 cement : 3 fine sand) as per Technical Specificationss
Section 1400.
5.29 Providing and Laying of R.C.C. (M-30) perforeted cover slab cu.m. -
excluding reinforcement as per drawing and Technical
Specificationss Sections 1500 & 1700.
7-16
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
5.32 Bored cast-in situ M-35 grade RCC piles complete as per
drawings & Technical Specificationss Section 1100. (excluding
reinforcement but including initial & routine load test) in all strata
as per relevant code.
5.34 Flat stone flooring laid in cement mortar complete as per drawing cu.m. -
and Technical Specifications Section 2500.
5.35 Sinking of wells through all type of soils and rock to be measured
from low water level (other then pneumatic method of sinking)
complete as per drawing and Techncial Specifications Clause
1200.
7-17
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
BF -
(ii) Depth 5-10 m m -
(iii) Depth 10-15 m. m -
(iv) 15-20 m. m -
(v) 20-25 m. m -
(vi) 25-30 m. m -
(b) for ___ dia well
5.37 Sand filling in wells as per drawings and technical Specifications cu.m. -
clause 1200.
5.38 Providing reinforced cement concrete (grade M20) catch pit in Nr. -
median with ancillary arrangement as per drawing and Technical
Specification (including Steel) reference clause 304, 1500, 1600,
1700, 1900, 2100, 2300 & 2400
5.39 Providing marker post for buried culverts as per drawing IRC:7- Nr. -
1971 and directions of the engineer including painting with
necessary details
7-18
5. CULVERTS, BRIDGES & PROTECTIVE WORK (Contd)
5.42 Providing and fixing filler type expansion joints (filler board, -
copper plate, compressible fibre board and sealing ) in slab
bridges and culverts complete as per drawing and technical m
specification clausen 2605
7-19
BILL NO. 6
6. DRAINAGE
6.01 Earthwork in excavation in all types of soil for construction of cu.m. 2,150
drains including disposal of surplus excavated earth with all leads
and lifts complete as per drawings and Technical Specificationss -
Section 300.
6.02 Excavating trenches of required width for pipes etc. and disposal cu.m. -
of surplus excavated soil with all leads and lifts complete as per
drawing and Technical Specificationss Clause 2903.
7-20
6. DRAINAGE (Contd)
6.07 a) Stone pitching 225 mm thick grouted with cement mortar 1:3, cu.m. -
complete as per drawing and Technical Specificationss Section
1400 and Clause 2504.
7-21
6. DRAINAGE (Contd..)
6.12 Edging with first class bricks laid dry including excavation, -
refilling, consolidating, hand packing and spreading neatly sand
within a lead of 50 metres
7-22
6. DRAINAGE (Contd)
6.17 Providing, placing and fixing in position 150 mm dia UPVC pipes r.m 400
for drainage with proper connection and clamping at specified
beations on kerb drain, retaining walls etc. including bends etc. all -
complete.
7-23
BILL NO. 7
7. JUNCTIONS
7.04 Providing and laying Cement concrete M-10 grade for foundation m -
of kerbs and separator.
7-24
BILL NO. 8
7-25
8. TRAFFIC SIGNS MARKING AND OTHER APPURTENANCES (Contd)
a) Lane/centre line/edge line/ transverse marking and any other sq.m. 585
markings. -
7-26
8. TRAFFIC SIGNS MARKING AND OTHER APPURTENANCES (Contd..)
7-27
BILL NO. 9
9. MISCELLANEOUS
9.01 Providing and maintaining vehicles for the Engineer and the
employer including providing of driver, POL etc. as per Technical
Specificationss Clause 124.
9.02 Supply of colour record photographs with negatives and two Nr. -
colour prints therefrom mounted in album as per Technical
Specificationss Clause 125.
(a) in Soil 1 m - 3 m m 80
3m-5m m 100
(b) in Rock 3 m - 10 m m 150
10 m - 15 m m 100
7-28
BILL NO. 10
10. MAINTENANCE
10.03 Providing bituminous tack coat 2.0 kg / 10 sqm with bitumen/ sq.m. -
emulsion as per Technical Specification Clause 503.
7-29
PAGE COLLECTION
Sub Total :
2 Earthworks
Sub Total :
Sub Total :
4 Bituminous / Courses
Sub Total :
Sub Total :
6 Drainage
Sub Total :
7 Junctions
Sub Total :
Sub Total :
9 Miscellaneous Item
Sub Total :
10 Maintenance
Sub Total :
Bill Total Bid Prices
Description
No. (Rupees in Figures and Words)
7 - 33
SUMMARY OF BILL OF QUANTITIES
2 Earthworks
4 Bituminous / Courses
6 Drainage
7 Junctions
9 Miscellaneous Items
10 Maintenance
Rupees : __________________________________________________________________
_________________________________________________________________________
7 - 34