Professional Documents
Culture Documents
Tubing & Pipe - 006 PDF
Tubing & Pipe - 006 PDF
Tubing & Pipe - 006 PDF
com
TOLERANCES
Mechanical Tubing........................................................ 7-43
Structural Tubing........................................................... 7-43
Cold Drawn Seamless Tubing....................................... 7-44
Cold Drawn Seamless Wall Thickness........................ 7-45
DOM Tubing Diameter.................................................. 7-46
Outside Diameter Tolerances for Hot Finished
Seamless Tubing.......................................................... 7-47
Hot Finished Seamless Round Tubing
Wall Thickness Tolerances............................................ 7-47
Ovality Tolerances......................................................... 7-47
Structural Pipe ............................................................. 7-48
Tested Pipe (A-53) ....................................................... 7-48
Hydraulic Tubing - (Seamless) ..................................... 7-48
7-1
alro.com
SQUARE TUBING
MECHANICAL TUBING Under 2" or 11 ga and under - ASTM A-513.
STRUCTURAL TUBING: 2" and over 11 ga wall thickness - ASTM A-500 Grade B.
Standard lengths of 20', 24', 40', and 48'.
1/2 x 1/2 2 x 2
18 ga 0.049 0.301 13 ga 0.095 2.461
16 ga 0.065 0.385 12 ga 0.109 2.803
5/8 x 5/8 11 ga 0.125 3.060
18 ga 0.049 0.400 10 ga 0.134 3.400
8 ga 0.165 4.120
16 ga 0.065 0.495 7 ga 0.188 4.320
3/4 x 3/4 1/4 0.250 5.410
18 ga 0.049 0.467 2-1/4 x 2-1/4
16 ga 0.065 0.606 16 ga 0.065 1.923
14 ga 0.083 0.753 11 ga 0.125 3.510
11 ga 0.120 1.028 1/4 0.250 6.260
7/8 x 7/8 2-1/2 x 2-1/2
18 ga 0.049 0.550 14 ga 0.083 2.728
16 ga 0.065 0.716 12 ga 0.109 3.544
14 ga 0.083 0.894 11 ga 0.125 3.900
10 ga 0.134 4.312
1 x 1 8 ga 0.165 5.240
18 ga 0.049 0.634 7 ga 0.188 5.590
16 ga 0.065 0.827 1/4 0.250 7.110
15 ga 0.072 0.909 5/16 0.312 8.440
14 ga 0.083 1.035
13 ga 0.095 1.169 3 x 3
12 ga 0.109 1.321 14 ga 0.083 3.240
11 ga 0.125 4.750
11 ga 0.120 1.436 10 ga 0.134 5.223
10 ga 0.134 1.583 8 ga 0.165 6.130
1-1/4 x 1-1/4 7 ga 0.188 6.870
18 ga 0.049 0.780 1/4 0.250 8.810
16 ga 0.065 1.048 5/16 0.312 10.580
14 ga 0.083 1.317 3/8 0.375 12.170
13 ga 0.095 1.492 3-1/2 x 3-1/2
12 ga 0.109 1.691 11 ga 0.125 5.610
11 ga 0.120 1.844 10 ga 0.134 6.134
3/16 0.188 2.400 8 ga 0.165 7.250
1-1/2 x 1-1/2 7 ga 0.188 8.150
16 ga 0.065 1.269 1/4 0.250 10.510
14 ga 0.083 1.600 5/16 0.312 12.710
13 ga 0.095 1.815 3/8 0.375 14.710
12 ga 0.109 2.062 4 x 4
11 ga 0.120 2.252 14 ga 0.083 4.320
10 ga 0.134 2.489 11 ga 0.125 6.460
8 ga 0.165 2.760 10 ga 0.134 7.045
7 ga 0.188 3.040 8 ga 0.165 8.730
1/4 0.250 4.250 7 ga 0.188 9.420
1-3/4 x 1-3/4 1/4 0.250 12.210
16 ga 0.065 1.490 5/16 0.313 14.830
14 ga 0.083 1.882 3/8 0.375 17.270
12 ga 0.109 2.433 1/2 0.500 21.630
11 ga 0.120 2.660
7 ga 0.188 3.680 4-1/2 x 4-1/2
11 ga 0.125 7.310
2 x 2 10 ga 0.134 7.790
18 ga 0.049 1.283
16 ga 0.065 1.710 8 ga 0.165 9.500
14 ga 0.083 2.160 7 ga 0.188 10.700
SQUARE TUBING
MECHANICAL TUBING Under 2" or 11 ga and under - ASTM A-513.
STRUCTURAL TUBING: 2" and over 11 ga wall thickness - ASTM A-500 Grade B.
Standard lengths of 20', 24', 40', and 48'.
4-1/2 x 4-1/2 8 x 8
1/4 0.250 13.91 7 ga 0.188 19.63
5/16 0.313 16.960 1/4 0.250 25.82
3/8 0.375 19.820 5/16 0.313 31.84
1/2 0.500 25.030 3/8 0.375 37.69
5 x 5 1/2 0.500 48.85
11 ga 0.125 8.16 5/8 0.625 59.32
10 ga 0.134 8.710 10 x 10
8 ga 0.165 10.610 7 ga 0.188 24.73
7 ga 0.188 11.97 1/4 0.250 32.63
1/4 0.250 15.62 5/16 0.313 40.35
5/16 0.313 19.08 3/8 0.375 47.90
3/8 0.375 22.37 1/2 0.500 62.46
1/2 0.500 28.43 5/8 0.625 76.33
6 x 6 12 x 12
11 ga 0.125 9.860 1/4 0.250 39.430
10 ga 0.134 10.530 5/16 0.313 48.860
8 ga 0.165 12.870 3/8 0.375 58.100
7 ga 0.188 14.53 1/2 0.500 76.070
1/4 0.250 19.02 5/8 0.625 93.360
5/16 0.312 23.34 14 x 14
3/8 0.375 27.48 5/16 0.313 57.360
1/2 0.500 35.24 3/8 0.375 68.310
5/8 0.625 42.300 1/2 0.500 89.680
7 x 7 5/8 0.625 110.360
7 ga 0.188 17.08 16 x 16
1/4 0.250 22.42 5/16 0.313 65.870
5/16 0.313 27.600 3/8 0.375 78.520
3/8 0.375 32.58
1/2 0.500 103.300
1/2 0.500 42.05
5/8 0.625 127.370
5/8 0.625 50.81
Alro Steel
Metals Industrial Supplies Plastics
Over 60 Locations
See the back cover for the Alro location near your facility.
7-3
alro.com
RECTANGULAR TUBING
MECHANICAL TUBING Under 2" or 11 ga and under - ASTM A-513.
STRUCTURAL TUBING: 2" and over 11 ga wall thickness - ASTM A-500 Grade B.
Standard lengths of 20', 24', 40', and 48'
1 x 1/2 2-1/2 x 2
16 ga 0.065 0.606 11 ga 0.125 3.480
1-1/2 x 1/2 10 ga 0.134 3.856
16 ga 0.065 0.827 8 ga 0.165 4.440
7 ga 0.188 4.960
1-1/2 x 3/4
16 ga 0.065 0.937 3 x 1
14 ga 0.083 1.176 16 ga 0.065 1.710
11 ga 0.120 1.601 14 ga 0.083 2.160
12 ga 0.109 2.803
1-1/2 x 1
11 ga 0.125 3.070
16 ga 0.065 1.048
10 ga 0.134 3.401
14 ga 0.083 1.317
8 ga 0.165 4.118
11 ga 0.120 1.844
7 ga 0.188 4.320
10 ga 0.134 2.134
3 x 1-1/2
2 x 1
14 ga 0.083 2.390
18 ga 0.049 0.956
11 ga 0.125 3.480
16 ga 0.065 1.269
10 ga 0.134 3.856
14 ga 0.083 1.600
8 ga 0.165 4.440
11 ga 0.120 2.252
7 ga 0.188 4.960
10 ga 0.134 2.489
1/4 0.250 6.250
8 ga 0.165 2.760
7 ga 0.188 3.040 3 x 2
16 ga 0.065 2.140
2 x 1-1/4
14 ga 0.083 2.728
14 ga 0.083 1.741
13 ga 0.095 3.030
11 ga 0.120 2.456
11 ga 0.125 3.900
2 x 1-1/2 10 ga 0.134 4.312
16 ga 0.065 1.500 8 ga 0.165 5.239
14 ga 0.083 1.882 7 ga 0.188 5.590
11 ga 0.120 2.660 1/4 0.250 7.110
10 ga 0.134 2.945 5/16 0.313 8.450
8 ga 0.165 3.320
3-1/2 x 1-1/2
7 ga 0.188 3.680
11 ga 0.125 3.900
2-1/2 x 1 10 ga 0.134 4.312
14 ga 0.083 1.882 8 ga 0.165 5.239
11 ga 0.120 2.660 7 ga 0.188 5.600
10 ga 0.134 2.950
3-1/2 x 2-1/2
8 ga 0.165 3.320
11 ga 0.125 4.750
7 ga 0.188 3.680
10 ga 0.134 5.070
2-1/2 x 1-1/4 8 ga 0.165 6.130
14 ga 0.083 2.023 7 ga 0.188 6.870
2-1/2 x 1-1/2 1/4 0.250 8.810
16 ga 0.065 1.710 4 x 1-1/2
14 ga 0.083 2.160 11 ga 0.125 4.330
11 ga 0.125 3.070 7 ga 0.188 6.230
10 ga 0.134 3.401
4x2
8 ga 0.165 4.118
14 ga 0.083 3.293
7 ga 0.188 4.320
11 ga 0.125 4.750
1/4 0.250 5.400
10 ga 0.134 5.070
8 ga 0.165 6.130
7 ga 0.188 6.870
Continued on next page
7-4
alro.com
RECTANGULAR TUBING
MECHANICAL TUBING Under 2" or 11 ga and under - ASTM A-513.
STRUCTURAL TUBING: 2" and over 11 ga wall thickness - ASTM A-500 Grade B.
Standard lengths of 20', 24', 40', and 48'.
4 x 2 5 x 4
1/4 0.250 8.810 5/16 0.313 16.960
5/16 0.313 10.580 3/8 0.375 19.820
3/8 0.375 12.170 1/2 0.500 25.030
4 x 2-1/2 6 x 2
11 ga 0.125 5.180 11 ga 0.125 6.460
7 ga 0.188 7.482 10 ga 0.134 7.045
4 x 3 8 ga 0.165 8.370
11 ga 0.125 5.610 7 ga 0.188 9.420
10 ga 0.134 6.134 1/4 0.250 12.210
8 ga 0.165 7.250 5/16 0.313 14.830
7 ga 0.188 8.150 3/8 0.375 17.270
1/4 0.250 10.510
6x3
5/16 0.313 12.700
11 ga 0.125 7.300
3/8 0.375 14.720
10 ga 0.134 7.790
4-1/2 x 3 8 ga 0.165 9.500
11 ga 0.125 6.030 7 ga 0.188 10.700
10 ga 0.134 6.589 1/4 0.250 13.910
8 ga 0.165 8.045 5/16 0.313 16.960
7 ga 0.188 8.780 3/8 0.375 19.820
1/4 0.250 11.360 1/2 0.500 25.030
5 x 2
6x4
11 ga 0.125 5.610
11 ga 0.125 8.160
10 ga 0.134 6.134
10 ga 0.134 8.710
8 ga 0.165 7.250
8 ga 0.165 10.610
7 ga 0.188 8.150
7 ga 0.188 11.970
1/4 0.250 10.510
1/4 0.250 15.620
5/16 0.313 12.700
5/16 0.313 19.080
3/8 0.375 14.720
3/8 0.375 22.370
5 x 2-1/2 1/2 0.500 28.430
11 ga 0.125 6.030
10 ga 0.134 6.589 7 x 3
8 ga 0.165 8.045 11 ga 0.125 8.160
7 ga 0.188 8.780 10 ga 0.134 8.710
1/4 0.250 11.360 8 ga 0.165 10.610
7 ga 0.188 11.970
5x3 1/4 0.250 15.620
11 ga 0.125 6.460 5/16 0.313 19.090
10 ga 0.134 7.045 3/8 0.375 22.370
8 ga 0.165 8.370 1/2 0.500 28.430
7 ga 0.188 9.420
1/4 0.250 12.210 7 x 4
5/16 0.313 14.840 11 ga 0.125 9.010
3/8 0.375 17.270 10 ga 0.134 9.620
1/2 0.500 21.630 8 ga 0.165 11.740
7 ga 0.188 13.30
5x4 1/4 0.250 17.32
11 ga 0.125 7.310 5/16 0.313 21.220
10 ga 0.134 7.790 3/8 0.375 24.930
8 ga 0.165 9.500 1/2 0.500 31.840
7 ga 0.188 10.700
1/4 0.250 13.910
Continued on next page
7-5
alro.com
RECTANGULAR TUBING
MECHANICAL TUBING Under 2" or 11 ga and under - ASTM A-513.
STRUCTURAL TUBING: 2" and over 11 ga wall thickness - ASTM A-500 Grade B.
Standard lengths of 20', 24', 40', and 48'.
7x5 10 x 2
11 ga 0.125 9.860 7 ga 0.188 14.530
10 ga 0.134 10.530 1/4 0.250 19.020
8 ga 0.165 12.870 5/16 0.313 23.340
7 ga 0.188 14.530 3/8 0.375 27.480
1/4 0.250 19.020
10 x 3
5/16 0.313 23.340
11 ga 0.125 10.710
3/8 0.375 27.480
10 ga 0.134 11.440
1/2 0.500 35.240
8 ga 0.165 13.990
8x2 7 ga 0.188 15.840
11 ga 0.125 8.160 1/4 0.250 20.720
10 ga 0.134 8.710 5/16 0.313 25.460
8 ga 0.165 10.610 3/8 0.375 30.030
7 ga 0.188 11.970
1/4 0.250 15.620 10 x 3-1/2
5/16 0.313 19.080 11 ga 0.125 11.130
3/8 0.375 22.370 10 ga 0.134 12.000
8 ga 0.165 14.550
8x3 7 ga 0.188 16.440
11 ga 0.125 9.010 1/4 0.250 21.570
10 ga 0.134 9.620 5/16 0.313 26.530
8 ga 0.165 11.740 3/8 0.375 31.310
7 ga 0.188 13.300
1/4 0.250 17.320 10 x 4
5/16 0.313 21.220 7 ga 0.188 17.080
3/8 0.375 24.930 1/4 0.250 22.420
1/2 0.500 31.840 5/16 0.313 27.590
3/8 0.375 32.580
8x4 1/2 0.500 42.050
11 ga 0.125 9.860
10 ga 0.134 10.530 10 x 5
8 ga 0.165 12.870 1/4 0.250 24.120
7 ga 0.188 14.530 3/8 0.375 35.140
1/4 0.250 19.020 10 x 6
5/16 0.313 23.340 7 ga 0.188 19.630
3/8 0.375 27.480 1/4 0.250 25.820
1/2 0.500 35.240 5/16 0.313 31.840
8x6 3/8 0.375 37.690
7 ga 0.188 17.080 1/2 0.500 48.850
1/4 0.250 22.420 5/8 0.625 59.320
5/16 0.313 27.590 10 x 8
3/8 0.375 32.580 7 ga 0.188 22.180
1/2 0.500 42.050 1/4 0.250 29.230
5/8 0.625 50.810 5/16 0.313 36.100
9x5 3/8 0.375 42.790
3/8 0.375 32.580 1/2 0.500 55.660
5/8 0.625 67.820
10 x 2
11 ga 0.125 9.860 12 x 2
10 ga 0.134 10.530 7 ga 0.188 17.080
8 ga 0.165 12.850 1/4 0.250 22.420
7-6
alro.com
RECTANGULAR TUBING
MECHANICAL TUBING Under 2" or 11 ga and under - ASTM A-513.
STRUCTURAL TUBING: 2" and over 11 ga wall thickness - ASTM A-500 Grade B.
Standard lengths of 20', 24', 40', and 48'.
7-7
alro.com
EPOXZKOTE TUBING
AVAILABLE COLORS
Red
Gray
Black
Clear
Product Description
Steel tubing produced to A513 and A500 B/C specifications that is phosphate
pretreated and coated with a fully cured weldable epoxy powder coat primer.
Performance Values
Salt Spray - ASTM B117 1,000 hours @ 1 mil with zero creepage @ scribe
Adhesion - ASTM D3359-90 5B
Impact - 100 inch lbs without any de-lamination of coating
Flexible - Forming and bending without cracking or flaking
DFT - 0.5 mil average dry film thickness
Benefits:
Weld spatter does not stick
EPOXZKOTE resists grease and oil
Eliminate embedded oils
Reduce use of chemical cleaners
No rust to remove
7-8
alro.com
EPOXZKOTE SQUARE TUBING
EPOXZKOTE
Outside Square Tubing
Dimension Available Gauges
(Inches) .083 .120 .125 .188 .250 .313 .375 .500
1-1/2 x x x x x
1-3/4 x x
2 x x x x x
2-1/2 x x x x
3 x x x x x
3-1/2 x x x x x
4 x x x x x x
4-1/2 x x x x x x
5 x x x x x x
6 x x x x x x
7 x x x x x
8 x x x
Available in Structural (A500) and Mechanical (A513) grades
quipment
E Capability Grades Bevel
Round Tube Carbon Carbon Steel
1/2 Min - 11 Max 3/4 Wall Max 45 Degree Max
Tube Laser Square Tube Stainless Steel Stainless Steel
1/2 Min - 8 Max 3/8 Wall Max 20 Degree Max
Rectangular Tube Aluminum Aluminum
10 x 6 Max 1/4 Wall Max 0 Degree
I-Beam/WF Beam
Channel/Angle
7/8 - 6
CAD Prints
Alro has a fully integrated CAD Department to handle most file types:
Preferred: dxf dwg iges
asm prt dft par psm pwd step
Also Accepted: X_B X_T prt sat model iam stp
ipt dgn asm prt sldasm sldprt stl
alro.com 888-888-ALRO
2 5 7 6
7-9
alro.com
EPOXZKOTE
Outside Rectangular Tubing
Dimension Available Gauges
(Inches) .083 .120 .125 .188 .250 .313 .375 .500
1.5 x 1
2 x 1 x x
2 x 1.5 x x
2.5 x 1.5 x x x
3 x 1 x x
3 x 2 x x x x
4 x 2 x x x x x
4 x 3 x x x x x
5 x 2 x x x x x
5 x 2.5 x x x
5 x 3 x x x x x x
5 x 4 x x x x x x
6 x 2 x x x x x
6 x 3 x x x x x x
6 x 4 x x x x x x
7 x 3 x x x x x x
7 x 4 x x x x x x
7 x 5 x x x x x x
8 x 2 x x x x x
8 x 3 x x x x x x
8 x 4 x x x x x x
8 x 6 x x x x
10 x 2 x x x x
10 x 4 x x x x
Available in Structural (A500) and Mechanical (A513) grades
EPOXZKOTE PIPE
EPOXZKOTE
Nominal Pipe Sizes in Inches
1-1/2 4
2 5
2-1/2 6
3 8
3-1/2
7-10
alro.com
1/4 OD
24 ga 0.022 0.206 0.0536 - - - -
22 ga 0.028 0.194 0.0664 - - X -
21 ga 0.032 0.187 0.0745 - - - -
20 ga 0.035 0.180 0.0804 - - X -
19 ga 0.042 0.166 0.0933 - - - -
18 ga 0.049 0.152 0.1052 - - - -
16 ga 0.065 0.120 0.1284 - - X -
5/16 OD
23 ga 0.025 0.263 0.0770 - - - -
21 ga 0.032 0.249 0.0960 - - - -
20 ga 0.035 0.242 0.1039 - - - -
18 ga 0.049 0.214 0.1382 - - X -
16 ga 0.065 0.182 0.1722 - - X -
3/8 OD
20 ga 0.035 0.305 0.1271 - - X -
18 ga 0.049 0.277 0.1706 - - X -
17 ga 0.058 0.259 0.1964 - - X -
16 ga 0.065 0.245 0.2152 - - X -
14 ga 0.083 0.209 0.2588 - - X -
13 ga 0.095 0.185 0.2840 - - - -
Drawn over Mandrel (DOM) tubing is defined by 3 different dimensions:
Inside Diameter (ID) Outside Diameter (OD) Wall Thickness
When ordering, only 2 of the 3 tolerances must be defined. Alro Steel purchases
DOM tubing, for general inventory, to the outside diameter and inside diameter.
If you do not see a size listed, please contact your Alro representative.
7/16 OD
20 ga 0.035 0.368 0.1506 - - - -
18 ga 0.049 0.340 0.2036 - - X -
17 ga 0.058 0.322 0.2354 - - X -
16 ga 0.065 0.307 0.2589 - - X -
14 ga 0.083 0.271 0.3147 - - X -
13 ga 0.095 0.248 0.3480 - - - -
12 ga 0.109 0.220 0.3830 - - - -
1/2 OD
20 ga 0.035 0.430 0.1738 - - X -
18 ga 0.049 0.402 0.2360 X - X -
17 ga 0.058 0.384 0.2738 - - X -
16 ga 0.065 0.370 0.3020 X - X -
15 ga 0.072 0.356 0.3291 - - - -
14 ga 0.083 0.334 0.3696 - - X -
13 ga 0.095 0.310 0.4109 - - X -
12 ga 0.109 0.282 0.4552 - - X -
11 ga 0.120 0.260 0.4870 - - X -
1/8 0.125 0.250 0.5010 - - - -
10 ga 0.134 0.232 0.5238 - - - -
8 ga 0.156 0.188 0.5660 - - X -
9/16 OD
16 ga 0.065 0.432 0.3460 - - X -
14 ga 0.083 0.396 0.4255 - - X -
13 ga 0.095 0.372 0.4748 - - X -
12 ga 0.109 0.344 0.5285 - - - -
11 ga 0.120 0.322 0.5677 - - X -
5/8 OD
20 ga 0.035 0.555 0.2210 - - X -
18 ga 0.049 0.527 0.3014 - - X -
17 ga 0.058 0.509 0.3512 - - X -
16 ga 0.065 0.495 0.3888 - - X -
14 ga 0.083 0.459 0.4805 - - X -
13 ga 0.095 0.435 0.5377 - - X -
12 ga 0.109 0.407 0.6007 - - X -
11 ga 0.120 0.385 0.6472 - - X -
1/8 0.125 0.375 0.6675 - - X -
10 ga 0.134 0.357 0.7027 - - X -
5/32 0.156 0.312 0.7814 - - X -
3/16 0.188 0.250 0.8774 - - X -
Drawn over Mandrel (DOM) tubing is defined by 3 different dimensions:
Inside Diameter (ID) Outside Diameter (OD) Wall Thickness
When ordering, only 2 of the 3 tolerances must be defined. Alro Steel purchases
DOM tubing, for general inventory, to the outside diameter and inside diameter.
If you do not see a size listed, please contact your Alro representative.
7-12 Continued on next page
alro.com
11/16 OD
16 ga 0.065 0.558 0.4325 - - X -
14 ga 0.083 0.521 0.5363 - - X -
13 ga 0.095 0.497 0.6017 - - X -
12 ga 0.109 0.469 0.6740 - - X -
11 ga 0.120 0.447 0.7279 - - X -
10 ga 0.134 0.419 0.7928 - - X -
5/32 0.156 0.375 0.8864 - - - -
3/16 0.188 0.312 1.0040 - - - -
7/32 0.218 0.252 1.0950 - - - -
3/4 OD
20 ga 0.035 0.680 0.2673 - - X -
18 ga 0.049 0.652 0.3668 X - X -
17 ga 0.058 0.634 0.4287 - X -
16 ga 0.065 0.620 0.4755 X - X -
15 ga 0.072 0.606 0.5214 - - - -
14 ga 0.083 0.584 0.5913 - - X -
13 ga 0.095 0.560 0.6646 - - X -
12 ga 0.109 0.532 0.7462 - - X -
11 ga 0.120 0.510 0.8074 - - X -
1/8 0.125 0.500 0.8344 - - X -
10 ga 0.134 0.482 0.8816 - - X -
5/32 0.156 0.437 0.9897 - - X -
11/64 0.172 0.406 1.0620 - - X -
3/16 0.188 0.375 1.1280 - - X -
7/32 0.219 0.312 1.2420 - - X -
1/4 0.250 0.250 1.3350 - - X -
13/16 OD
22 ga 0.028 0.757 0.2347 - - - -
20 ga 0.035 0.742 0.2908 - - - -
18 ga 0.049 0.714 0.3998 - - - -
16 ga 0.065 0.682 0.5193 - - X -
14 ga 0.083 0.647 0.6471 - - X -
13 ga 0.095 0.622 0.7260 - - X -
11 ga 0.120 0.572 0.8881 - - X -
10 ga 0.134 0.544 0.9717 - - - -
5/32 0.156 0.500 1.0950 - - X -
3/16 0.188 0.437 1.2550 - - - -
Drawn over Mandrel (DOM) tubing is defined by 3 different dimensions:
Inside Diameter (ID) Outside Diameter (OD) Wall Thickness
When ordering, only 2 of the 3 tolerances must be defined. Alro Steel purchases
DOM tubing, for general inventory, to the outside diameter and inside diameter.
If you do not see a size listed, please contact your Alro representative.
7-38
alro.com
Alro Steel
Metals Industrial Supplies Plastics
7-39
alro.com
WALL
CARBON STEEL PIPE THICKNESS
B
A C THEOR. WT.PER ASTM
SCHED. WALL I.D. FOOT TYPE
1/8 IPS (.405 OD)
Sched. 40 .068 .269 .245 A-53
Sched. 80 .095 .215 .315 A-53
1/4 IPS (.540 OD)
Sched. 40 .088 .364 .425 A-53
Sched. 80 .119 .302 .535 A-53
3/8 IPS (.675 OD)
Sched. 40 .091 .493 .568 A-53
Sched. 80 .126 .423 .739 A-53
1/2 IPS (.840 OD)
Sched. 10 .083 .674 .670 A-500B
Sched. 40 .109 .622 .851 A-53
Sched. 40 .109 .622 .851 A-500B
Sched. 80 .147 .546 1.088 A-53
3/4 IPS (1.050 OD)
Sched. 10 .083 .884 .857 A-500B
Sched. 40 .113 .824 1.131 A-53
Sched. 40 .113 .824 1.131 A-500B
Sched. 80 .154 .742 1.474 A-53
1 IPS (1.315 OD)
Sched. 10 .109 1.097 1.410 A-500B
Sched. 40 .133 1.049 1.679 A-53
Sched. 40 .133 1.049 1.679 A-500B
Sched. 80 .179 .957 2.172 A-53
1-1/4 IPS (1.660 OD)
Sched. 10 .109 1.442 1.810 A-500B
Sched. 40 .140 1.380 2.273 A-53
Sched. 40 .140 1.380 2.273 A-500B
Sched. 80 .191 1.278 2.997 A-53
Sched. 80 .191 1.278 2.997 A-500B
1-1/2 IPS (1.900 OD)
Sched. 10 .109 1.682 2.090 A-500B
Sched. 40 .145 1.610 2.718 A-53
Sched. 40 .145 1.610 2.718 A-500B
Sched. 80 .200 1.500 3.631 A-53
Sched. 80 .200 1.500 3.631 A-500B
Standard length of 21'. Continued on next page
A-53 is available in Galvanized
7-40
alro.com
B
A C THEOR. WT.PER ASTM
SCHED. WALL I.D. FOOT TYPE
2 IPS (2.375 OD)
Sched. 10 .109 2.157 2.640 A500B
Sched. 40 .154 2.067 3.653 A-53
Sched. 40 .154 2.067 3.653 A-500B
Sched. 80 .218 1.939 5.022 A-53
Sched. 80 .218 1.939 5.022 A-500B
2-1/2 IPS (2.875 OD)
Sched. 40 .203 2.469 5.793 A-53
Sched. 40 .203 2.469 5.793 A-500B
Sched. 80 .276 2.323 7.661 A-53
Sched. 80 .276 2.323 7.661 A-500B
3 IPS (3.500 OD)
Sched. 40 .216 3.068 7.576 A-53
Sched. 40 .216 3.068 7.576 A-500B
Sched. 80 .300 2.900 10.250 A-53
Sched. 80 .300 2.900 10.250 A-500B
3-1/2 IPS (4.000 OD)
Sched. 40 .226 3.548 9.109 A-53
Sched. 40 .226 3.548 9.109 A-500B
Sched. 80 .318 3.364 12.510 A-53
Sched. 80 .318 3.364 12.510 A-500B
4 IPS (4.500 0D)
Sched. 40 .237 4.026 10.790 A-53
Sched. 40 .237 4.026 10.790 A-500B
Sched. 80 .337 3.826 14.997 A-53
Sched. 80 .337 3.826 14.997 A-500B
5 IPS (5.563 OD)
Sched. 40 .258 5.047 14.620 A-53
Sched. 40 .258 5.047 14.620 A-500B
Sched. 80 .375 4.813 20.780 A-53
Sched. 80 .375 4.813 20.780 A-500B
6 IPS (6.625 0D)
Sched. 40 .280 6.065 18.970 A-53
Sched. 40 .280 6.065 18.970 A-500B
Sched. 80 .432 5.761 28.570 A-53
Sched. 80 .432 5.761 28.570 A-500B
Also available in galvanized Sched. 40.
A-53 is available in Galvanized
B
A C THEOR. WT.PER ASTM
SCHED. WALL I.D. FOOT TYPE
8 IPS (8.625 0D)
Sched. 40 .322 7.981 28.550 A-53
Sched. 40 .322 7.981 28.550 A-500B
Sched. 80 .500 7.625 43.428 A-53
Sched. 80 .500 7.625 43.428 A-500B
10 IPS (10.75 0D)
Sched. 20 .250 10.250 28.060 A-500B
Sched. 40 .365 10.020 40.480 A-53
Sched. 80 .594 9.562 64.490 A-500B
12 IPS (12.75 OD) .375 12.000 49.608 A-500B
16 IPS (16.00 OD)
Sched.10 .250 15.500 42.090 A-500B
Standard .375 15.250 62.580 A-500B
Contact us today
888-888-ALRO
2 5 7 6
7-42
alro.com
Straightness Tolerances
Max. = 1/16" in 3'
Straightness Tolerances
Max. = .025" per ft.
7-43
alro.com
7-44
alro.com
Benefits
ID/OD chamfers both ends
Production speeds
Precision tolerances (+/- .005)
Cutting Capabilities
OD: 1.500 up to 6.700
Wall Thickness: .049 up to 1.000
Min Cut Length: .750
Standard Bevel Features: 30,40,45
(Actual size of 30 bevel is 27.5)
Capable of 60 OD weld prep
Other Features Available
Materials
Carbon Steel Brass Copper
Stainless Steel Bronze Alloys
Aluminum
alro.com 888-888-ALRO
2 5 7 6
7-45
alro.com
7-46
alro.com
OVALITY TOLERANCES
ASTM A513-T5
Ovality shall be within the below tolerance except when wall thickness is less than 3% of the
OD. In such cases, the additional ovality shall be as follows, but the mean diameter shall be
within the specified tolerance:
Outside Diameter Additional Ovality Tolerance
in Inches in Inches
Up to 2.000 .010
Over 2.000 to 3.000 .015
Over 3.000 to 4.000 .020
Over 4.000 to 5.000 .025
Over 5.000 to 6.000 .030
Over 6.000 to 7.000 .035
Over 7.000 to 8.000 .040
Over 8.000 to 9.000 .045
Over 9.000 to 10.000 .050
Over 10.000 to 11.000 .055
Over 11.000 to 12.000 .060
Over 12.000 to 13.000 .065
Over 13.000 to 14.000 .070
Over 14.000 to 15.000 .075
7-47
STRUCTURAL PIPE TOLERANCES
Straightness
1/8 times the number of feet of total length divided by 5
When the outside diameter and wall thickness of 1/2 inch to 3-1/2 inch OD tubes
are specified, the outside diameter shall conform to the tolerances given in the
above table, and the wall thicknesses shall not vary from that specified more than
plus or minus 10 percent. When less than 1/2 inch ID, the outside diameter shall
conform to the tolerances given in the above table. The wall thickness shall not
vary from that specified more than plus or minus 15 percent.
7-48