Professional Documents
Culture Documents
PRODUCT CATALOG
2017Feb. 2
P R O U D L Y S E R V I N G I N D U S T R Y S I N C E 1 9 7 1
www.aaatech.com
AAA Technology & Specialties Co., Inc.
TABLE OF CONTENTS
Introduction 1
Shoe Types 2-3
How to OrderPipe Shoe Variables 4
Pipe Shoe VariablesSlot Option Details 5
Selecting the Best Pipe ShoeSelection Logic 6
Selection LogicGuide Details 7
Slide Bearing Option Details 8
Base Plate Details 9
How To Order with Custom Properties 10
SHOE TYPES AND SPECIFICATIONS
PIPE SHOES
AAA Technology & Specialties Co., Inc. is proud to provide a complete line of Pipe Shoes and Supports. These pipe
shoes are constructed in accordance with the rules and regulations specified and defined by the Quality Assurance
Procedures for Pipe Supports Manufactured per the ASME B31.1, B31.2, B31.3, B31.4, B31.5, B31.8, B31.9,
B31.11 & B31.12 Piping Codes, the ANSI/AWS D1.1 and the MSS SP-58 & MSS SP-69 Standards. Well trained and
experienced personal using formal standardized document systems and fabrication control methods supervise all
projects.
Please do not hesitate to call or e-mail AAA Technology & Specialties Co., Inc. to tell us about your requirements so
that we can better serve you and fulfill your Pipe Support needs.
Page 2 AAA Technology & Specialties Co., Inc.
PIPE SHOES
SHOE TYPES
Choose from three designs of unreinforced pipe shoes: 1) Split Beam T-Shoe (single upright); 2) Fabricated (from flat bar or cut
plate) Pipe Shoe (single upright); or 3) Double Upright Pipe Shoe. Each design, in turn, can be fabricated : 1) Plain; 2) With U-
Bolts; or 3) With Pipe Clamps.
5000 - Split Beam 5010 - Split Beam with U-Bolts 5020 - Split Beam with Clamps
5100 - Fabricated 5110 - Fabricated with U-Bolts 5120 - Fabricated with Clamps
5200 - Double Upright 5210 - Double Upright with U-Bolts 5220 - Double Upright with Clamps
Page 3
PIPE SHOES
SHOE TYPES
Choose from three designs of gusseted or reinforced pipe shoes: 1) Split Beam T-Shoe (single upright); 2) Fabricated (from flat
bar or cut plate) Pipe Shoe (single upright); or 3) Double Upright Pipe Shoe. Each design, in turn, can be fabricated : 1) Plain;
2) With U-Bolts; or 3) With Pipe Clamps.
5001 - Split Beam- Gussets 5011 - Split Beam with U-Bolts - Gussets 5021 - Split Beam with Clamps - Gussets
5101 - Fabricated- Gussets 5111 - Fabricated with U-BoltsGussets 5121 - Fabricated with ClampsGussets
5201 - Double Upright - Gussets 5211 - Double Upright w/ U-BoltsGussets 5221 - Double Upright w/ ClampsGussets
AAA Technology & Specialties Co., Inc.
Page 4 AAA Technology & Specialties Co., Inc.
PIPE SHOES
HOW TO ORDER
Standard Pipe Shoes are ordered by indicating the following dimensions and choices:
5010 Split Beam T-Shoe w/U-Bolts 5011 Split Beam T-Shoe w/U-Bolts w/ End Gussets
5020 Split Beam T-Shoe w/Clamps 5021 Split Beam T-Shoe w/Clamps w/ End Gussets
5110 Fabricated T-Shoe w/U-Bolts 5111 Fabricated T-Shoe w/U-Bolts w/ End Gussets
5120 Fabricated T-Shoe w/Clamps 5121 Fabricated T-Shoe w/Clamps w/ End Gussets
5200 Double Upright T-Shoe 5201 Double Upright T-Shoe w/ End Gussets
5210 Double Upright T-Shoe w/U-Bolts 5211 Double Upright T-Shoe w/U-Bolts w/ End Gussets
5220 Double Upright T-Shoe w/Clamps 5221 Double Upright T-Shoe w/Clamps w/ End Gussets
PIPE SHOES
3. BOP & Length Typical BOPs are 4, 6 or 8, however, the BOP can be defined by you to fit your require-
ments. Please note that as shoes become shorter in height, there is a minimum height for U-Bolt-on pipe
shoes because of the U-Bolt extending downwards below the top of the shoe. Clamp-on pipe shoes also have
minimums because of the clearance required to install the closure bolts.
Also, as the height of the shoe becomes larger, the lateral strength of the pipe shoe becomes less.
The length of the pipe shoe is typically 6, 12, 18, 24, 30 & 36 with 12 & 18 being by far the most com-
mon lengths defined by our customers. However, the shoe length can be specified by the customer. Lengths
and heights can be defined in inches or millimeters, but the units must be specified.
4. Slot Option Slot options of S1 through S4 are available for selection. The most commonly selected slots
are No Slots and Insulation Band Slots. Expansion slots can be provided in cases where your pipe is oper-
ating at a very high temperature and the shoe will not expand as much as the pipe. The danger is the shear-
ing of the weld between the pipe and the shoe. Expansion slots allow the shoe to flex as the pipe grows in
order to reduce the potential of shear failure in the weld between the pipe and the shoe. Please note that slots
of any kind reduce the strength of any pipe shoe. Enter S1 if you do not want any slots of any type.
5. Slide Bearing See the listing of Slide Bearing options available above. Steel on steel is a frequently select-
ed option. To specify steel on steel as your option, enter NSB for No Bearing.
6. Material Specification Enter the ASTM Material Specification. Default is A-36 Carbon Steel. If the Materi-
al specification is omitted, AAA Technology will fabricate the pipe shoes of A-36 steel.
7. Material Finish The finish options available are: Plain, HDG (Hot Dip Galvanized), Primed (default primer is
red oxide, however the customer may specify the primer desired, Painted (customer to define the paint specifi-
cation desired) or custom whereby the customer is to define the coating.
8. Guide Type See the listing of Guide Type options available above. Further specification of guide proper-
ties may be required as discussed further in this document.
PIPE SHOES
Selecting the Best Pipe Shoe for Your Application
1. Determine if pipe shoes can be welded to the pipe or must be mechanically attached to the pipe.
a. If the shoe can be welded to the pipe, then determine what the pipe material is so that the pipe shoe
material can be properly welded to the pipe.
b. If welding is exotic and will require specialized welding in the field, it may be more cost effective to se-
lect a mechanically attached pipe shoe design.
c. If field welding is not allowed or preferred, then opt for a mechanically attached pipe shoe.
2. Determine the Loading Requirements for the pipe shoe. In other words, how much vertical load, lateral load
and axial load is to be carried by the pipe shoe? If the lateral and axial loads to be carried are minimal, then a
single upright, unreinforced pipe shoe will likely be satisfactory for your application. So long as the shoe is not
too tall, the allowable for the pipe shoe can be calculated simply as force/area. Keep in mind that the length of
the shoe support surface in contact with the support member can reduce the support area for this calculation.
Further, the weakest part of your support system may be the contact point of the pipe and the pipe shoe and
may not be the pipe shoe at all.
The allowable loads listed for the pipe shoes in this catalog are based upon the full length of the pipe shoe
being in contact with the supporting member. Reduce the allowables appropriately for your support conditions.
The material and the operating temperature can also effect the allowable stress and therefore the allowable
loads that can be carried.
3. See the Selection Logic on the following page to assist in selecting the best pipe shoe for your application
Selection Logic
Weld-on
1. Material Requirements The material for a weld-on pipe shoe should match the pipe material. Typically, A-36
is acceptable for being welded to A-53 and A-106 pipe, but the project specifications or the customer should be
consulted for material acceptability.
2. Pipe Shoe Finish In areas where corrosion is prevalent, a hot dip galvanizing is frequently called for. Please
note that galvanized pipe shoes (welded or mechanically attached) should not be used on stainless steel pipe.
3. Loading
a. Where vertical loads exceed the allowables based upon the support member length, thicker vertical up-
rights should be specified and/or end gussets.
b. Where lateral loads are more than minimal (this varies with the loading and the shoe), end gussets are
generally recommended.
c. Where axial loads are more than minimal (this varies with the loading and the shoe), end gussets are
generally recommended.
4. Split Beam or Fabricated Shoe Shoes made from split beam are generally slightly lighter than those fabricat-
ed from plate or flat bar. They are also made of dual rated beam that means that the stress rating will be 50,000
psi rather than 36,000 psi as in shoes fabricated from standard carbon steel plate or flat bar. Shoes made of
split carbon steel beam are generally less expensive than pipe shoes constructed of plate or flat bar because of
the additional cutting, welding and grinding involve in fabricating a shoe from plate or flat bar.
5. Slide Bearings In order to minimize lateral and axial loads carried by the pipe shoe if guides and line stops
are not specified, consider adding a low friction slide bearing. See AAA Technologys TRI*SLIDE literature for
details that will assist you in specifying the correct slide bearing for your application.
Page 7
PIPE SHOES
GUIDE DETAIL
Type NG, No Guide Type AG, Angle Guide Type AG2, Angle Guide 2
Type AG&ST, Angle Guide & Line Stop Type CG, Clip Guide
Page 8 AAA Technology & Specialties Co., Inc.
PIPE SHOES
PIPE SHOES
Type AG Type AG
Pipe Size T (in) Type NG Type CG Type NG Type CG
or AG2 or AG2
Different lengths, widths and thicknesses available upon request. Type CG Base Plate
Page 10 AAA Technology & Specialties Co., Inc.
PIPE SHOES
HOW TO ORDER
Standard Pipe Shoe Guides and Stops are ordered by indicating the following dimensions and choices:
713-849-3366 | www.aaatech.com | info@aaatech.com Page 11
PIPE SHOES
FIG. 5000 SPLIT BEAM PIPE SHOE
APPLICATION: The Fig 5000 Pipe Shoe is to be welded to the pipe along the top edge & the base can also be welded to the support
member to anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-992 steel.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5001 SPLIT BEAM PIPE SHOE W/ END GUSSETS
APPLICATION: The Fig 5001 Pipe Shoe with End Gusset Plates is to be welded to the pipe along the top edges of the shoe and the
gussets and the base can also be welded to the support member to anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-992 steel with End Gussets of A-36 Plate.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5010 SPLIT BEAM PIPE SHOE W/U-BOLTS
APPLICATION: The Fig. 5010 Pipe Shoe is to be U-Bolted to the pipe in the U-Bolt cradles & the base can be welded to the support member to
anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-992 steel.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5011 SPLIT BEAM PIPE SHOE W/END GUSSETS W/U-BOLTS
APPLICATION: The Fig. 5011 Pipe Shoe with End Gusset Plates is to be U-Bolted to the pipe in the U-Bolt cradles & the base can be welded
to the support member to anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-992 steel with End Gussets of A-36 Plate.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5020 SPLIT BEAM PIPE SHOE W/CLAMPS
APPLICATION: The Fig. 5020 Pipe Shoe is to be clamped to the pipe & the base can be welded to the support member to anchor the
pipe.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-992 steel.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5021 SPLIT BEAM PIPE SHOE W/END GUSSETS W/CLAMPS
APPLICATION: The Fig. 5021 Pipe Shoe with End Gusset Plates is to be clamped to the pipe along the top edge & the base can be
welded to the support member to anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-992 steel with End Gussets of A-36 Plate.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5100 FABRICATED PIPE SHOE
APPLICATION: The Fig. 5100 Pipe Shoe is to be welded to the pipe along the top edge & the base can be welded to the support mem-
ber to anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed of A-36 steel flat bar or plate welded together.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5101 FABRICATED PIPE SHOE W/ END GUSSETS
APPLICATION: The Fig. 5101 Pipe Shoe with End Gusset Plates is to be welded to the pipe along all top edges & the base can be weld-
ed to the support member to anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed from of A-36 steel flat bar or plate welded together.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5110 FABRICATED PIPE SHOE w/U-BOLTS
APPLICATION: The Fig. 5110 Pipe Shoe is to be U-Bolted to the pipe in the U-Bolt cradles & the base can be welded to the support member to
anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed from of A-36 steel flat bar or plate welded together.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5111 FABRICATED PIPE SHOE W/END GUSSETS w/ U-BOLTS
APPLICATION: The Fig. 5111 Pipe Shoe with End Gusset Plates is to be U-Bolted to the pipe in the U-Bolt cradles & the base can be welded
to the support member to anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed from of A-36 steel flat bar or plate welded together.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5120 FABRICATED PIPE SHOE W/ PIPE CLAMPS
APPLICATION: The Fig. 5120 Pipe Shoe is to be clamped to the pipe & the base can be welded to the support member to anchor the
pipe.
CONSTRUCTION: The Pipe Shoe is constructed of A-36 steel flat bar or plate welded and assembled together.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
PIPE SHOES
FIG. 5121 FABRICATED PIPE SHOE W/END GUSSETS W/PIPE CLAMPS
APPLICATION: The Fig. 5121 Pipe Shoe with End Gusset Plates is to be clamped to the pipe & the base can be welded
to the support member to anchor the pipe.
CONSTRUCTION: The Pipe Shoe is constructed from of A-36 steel flat bar or plate welded together..
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3 - Fig. 5120 - 4x12 - S1 - T/T - AG
PIPE SHOES
FIG. 5200 DOUBLE UPRIGHT PIPE SHOE
APPLICATION: The Fig. 5200 Shoe is to be welded to the pipe along the two top edges. To anchor the shoe, the base can
also be welded to the support structure beneath.
CONSTRUCTION: The Pipe Shoe is constructed of A-36 steel flat bar or plate welded together. The two side uprights are
welded to the middle gusset as well as to the base.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different
lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3 - Fig. 5200 - 4x12 - S1/GP - T/T - AG
PIPE SHOES
FIG. 5201 DOUBLE UPRIGHT PIPE SHOE WITH END GUSSETS
APPLICATION: The Fig. 5201 Shoe is to be welded to the pipe along the two top longitudinal edges and on the accessible edg-
es of the gusset to pipe intersections. To anchor the shoe, the base can also be welded to the support structure beneath.
CONSTRUCTION: The Pipe Shoe is constructed of A-36 steel flat bar or plate welded together. The two end gussets and two
side uprights are all welded on the upright seams as well as to the base. The middle gusset is welded to the side uprights.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3 - Fig. 5200 - 4x12 - S1/GP - T/T - AG
PIPE SHOES
FIG. 5210 DOUBLE UPRIGHT PIPE SHOE w/U-BOLTS
APPLICATION: The Fig. 5210 Shoe is to be U-Bolted to the pipe. To anchor the shoe, the base can also be welded to the
support structure beneath. Note that U-Bolts will not restrain high anchor loads.
CONSTRUCTION: The Pipe Shoe is constructed of A-36 steel flat bar or plate welded together. The two side uprights are
welded to the middle gusset as well as to the base and the U-Bolt cradles.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different
lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3 - Fig. 5210 - 4x12 - S1/GP - T/T - AG
PIPE SHOES
FIG. 5211 DOUBLE UPRIGHT PIPE SHOE w/U-BOLTS WITH END GUSSETS
APPLICATION: The Fig. 5211 Shoe is to be U-Bolted to the pipe. To anchor the shoe, the base can also be welded to the sup-
port structure beneath. Note that U-Bolts will not restrain high anchor loads.
CONSTRUCTION: The Pipe Shoe is constructed of two end gussets and two side uprights that are all welded on the
upright seams as well as to an A-36 base. The uprights and gussets are also welded to the two U-Bolt cradles. The middle gus-
set is welded to the side uprights as well.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3 - Fig. 5210 - 4x12 - S1/GP - T/T - AG
PIPE SHOES
FIG. 5220 DOUBLE UPRIGHT PIPE SHOE w/CLAMPS
APPLICATION: The Fig. 5220 Shoe is to be clamped to the pipe along the top edges of the shoe. To anchor the shoe,
the base can also be welded to the support structure beneath.
CONSTRUCTION: The Pipe Shoe is constructed of two braced vertical flat bars or plates welded on a A -36 steel base.
The middle gusset is welded to the side uprights as well. To anchor the shoe, the base can also be welded to the support struc-
ture beneath.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3 - Fig.5220 - 4x12 - S1/GP - T/T - AG
PIPE SHOES
FIG. 5221 DOUBLE UPRIGHT PIPE SHOE w/CLAMPS w/ END GUSSETS
APPLICATION: The Fig. 5221 Shoe is to be clamped to the pipe along the top edge. To anchor the shoe, the base can
also be welded to the support structure beneath.
CONSTRUCTION: The Pipe Shoe is constructed of two end gussets and two side uprights that are all welded on the
upright seams as well as to an A-36 base. The uprights and gussets are also welded to the two bottom pipe clamp halves. The
middle gusset is welded to the side uprights as well.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different
lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3 - Fig.5221 - 4x12 - S1/GP - T/T - AG
PIPE SADDLES
FIG. 5500 HEAVY DUTY PIPE SADDLE
APPLICATION: The Fig. 5500 Heavy Duty Pipe Saddle is used to support large diameter pipe.
CONSTRUCTION: The Saddle is constructed of A-36 carbon steel.
FINISH: The Saddle can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Saddle can be supplied in different dimensions upon request.
ORDERING: To order, specify pipe size, figure number, desired finish and any non -standard dimensions.
EXAMPLE: 20 - Fig.6000 - Painted
B
Pipe Size R (IN) A (IN) C (IN) T (IN) T2 (IN) T3 (IN)
WIDE STD.
20 10 20 1/2 20 6 14 3/8 1/2 3/8 ---
22 11 22 20 6 15 3/8 1/2 3/8 ---
24 12 23 1/2 20 6 16 3/8 1/2 3/8 ---
26 13 25 1/2 20 6 17 3/8 1/2 3/8 ---
28 14 27 20 6 18 3/8 1/2 3/8 ---
30 15 29 20 6 19 1/2 5/8 1/2 1/2
32 16 31 20 6 20 1/2 5/8 1/2 1/2
34 17 32 20 6 20 1/2 5/8 1/2 1/2
36 18 34 20 6 22 1/2 5/8 1/2 1/2
38 19 36 20 6 22 1/2 5/8 1/2 1/2
40 20 38 20 6 24 1/2 5/8 1/2 1/2
42 21 40 20 6 26 1/2 5/8 1/2 1/2
48 24 46 20 6 32 1/2 5/8 1/2 1/2
54 27 52 20 6 36 1/2 5/8 1/2 1/2
60 30 58 20 6 40 1/2 5/8 1/2 1/2
AAA TECHNOLOGY & SPECIALTIES CO., INC.
6219 Brittmoore Road Houston, Texas 77041-5114, U.S.A.
Telephone: 713-849-3366 FAX: 713-849-3654
E-mail: info@aaatech.com Website: http://www.aaatech.com
P I P E H A N G E R S , S U P P O RT S , R E S T R A I N T S & FA B R I C AT I O N
VIBRATION CONTROL TRI*FOAM & TRI*CAL PIPE SHOES, GUIDES & TRI-SLIDE LOW
HOLD DOWN CLAMPS INSULATED SUPPORTS LINE STOPS FRICTION BEARINGS
Piping Stress Analysis Services - Need to know what pipe supports to select or why the loads on
EQUAL your equipment or the stresses in your piping system are too high? We can perform a TRIFLEX
ENGINEERED piping stress analysis and tell you and we can recommend solutions.
VARIABLE SPRING HANG-
ERS
Pipe Hanger Fitness for Service Studies - Need to sort out whether the pipe supports and spring
hangers in your plant are performing as originally intended or if corrosion has affected their ability to
perform? We can help make these determinations and provide you with complete documentation as
well as offer recommendations for improvements.